共用方式為


2.2.1.6.1 Child Elements

The following table lists the child elements of the Description element.

Element

Type

Available

Description

Connectivity

ConnectivityType

Yes

Interactive Connectivity Establishment (ICE) connectivity information.

Security

xs:string [128]

Yes

The security profile in use. Supported values are "V1", "SRTP" and "None".

Offerer

xs:boolean

Yes<37>

"True" if the reporting endpoint offered the Media Line; otherwise, "False".

Transport

TransportType

Yes

The type of transport in use. Supported values are "TCP" and "UDP".

NetworkConnectivityInfo<38>

NetworkConnectivityInfoType

Yes

Information about network connectivity of the endpoint.

LocalAddr

AddrType

Yes

Internet Protocol (IP) address related information for the reporting endpoint.

RemoteAddr

AddrType

Yes

IP address related information for the remote endpoint.

CaptureDev

DeviceType

Yes

A device that is used to capture audio and video media, such as a microphone, a USB phone or a camera.

RenderDev

DeviceType

Yes

A device that is used to render audio and video media, such as speakers, a headset, or a USB phone.

v3:ReflexiveLocalIPAddress<39>

AddrType

Yes

The IP address from which the Media Relay received the allocate request. This address is returned by the Media Relay.

v3:MidCallReport<40>

xs:boolean

Yes

A flag that indicates whether the QoE data is reported during the middle of the call.

v3:Separator3<41>

default

No

Separator element used for future schema extensions.

v4:WifiRadioType<42>

xs:unsignedByte

Yes

Average render speech level after dynamic range compression or analog gain control is applied.

v4:WifiRSSI<43>

xs:int

Yes

Average WiFi Received Signal Strength Indication value expressed in percentage points [0-99].

v4:SSID<44>

xs:string

Yes

Name of WiFi Service Set Identifier.

v4:WifiChannel<45>

xs:int

Yes

WiFi channel used during session.

v4:ActivePowerProfile<46>

xs:int

Yes

Was WiFi placed in lower power mode during session.

v4:WifiHandovers<47>

xs:int

Yes

Number of WiFi hand overs to other access points during session.

v4:WifiChannelSwitches<48>

xs:int

Yes

Number of times the WiFi channel switched during session.

v4:WifiChannelReassociations<49>

xs:int

Yes

Number of WiFi channel reassociated during session.

v4:RecvQoSMarking<50>

xs:unsignedByte

Yes

Quality of Service marking on packets received during session. Currently not used.

v4:SendQoSMarking<51>

xs:unsignedByte

Yes

Quality of Service marking on packets sent during session. Currently not used.

v4:WifiRadioFrequency

xs:int

Yes

WiFi frequency used during session.

v4:WifiMTU

xs:int

Yes

The maximum transmission unit (MTU) for the Wi-Fi connection.

v4:WifiSupportFlags

xs:int

Yes

A flag that indicates whether the IPv4 or IPv6 protocols are supported. SupportFalg_IPv4 = (1<<0); SupportFlag_IPv6 = (1<<1).

v4:WifiStatusFlags

xs:int

Yes

A flag that indicates the current connection status. StatusFlag_VPN = (1<<0).

v4:WifiTunnelType

xs:int

Yes

A flag that indicates the active tunneling technology between IPv6 and IPv4. The value is one of the following:
None = 0
Other = 1

Direct = 2

6To4 = 3

ISATAP = 4

Teredo = 5

IPHTTPS = 6

v4:WifiSignalStrength

xs:int

Yes

The Wi-Fi signal strength in percentage points [0-99].

v4:WifiBatteryCharge

xs:int

Yes

The estimated remaining battery charge in percentage points [0-99], with 0 indicating that the device was plugged in.

v4:ConnectionName

xs:string

Yes

The currently active VPN network name.

v4:DNSSuffix

xs:string

Yes

The DNS suffix associated with the network adapter.

v4:LastRTPSendTime<52>

xs:dateTime

Yes

Date and time the last RTP packet was sent.

v4:LastRTCPSendTime<53>

xs:dateTime

Yes

Date and time the last RTP packet was sent.

v4:LastRTPReceiveTime<54>

xs:dateTime

Yes

Date and time the last RTP packet was received.

v4:LastRTCPReceiveTime<55>

xs:dateTime

Yes

Date and time the last RTP packet was received.

v4:Separator4<56>

default

Yes

Separator used for future schema extensions.