2.2 Win32 Error Codes
All Win32 error codes MUST be in the range 0x0000 to 0xFFFF, although Win32 error codes can be used both in 16-bit fields (such as within the HRESULT type specified in section 2.1) as well as 32-bit fields. Most values also have a default message defined, which can be used to map the value to a human-readable text message; when this is done, the Win32 error code is also known as a message identifier.
The following table specifies the values and corresponding meanings of the Win32 error codes. Vendors SHOULD NOT assign other meanings to these values, to avoid the risk of a collision in the future.
This document provides the common usage details of the Win32 error codes; individual protocol specifications provide expanded or modified definitions.
Note In the following descriptions, a percentage sign followed by one or more alphanumeric characters (for example, "%1" or "%hs") indicates a variable that will be replaced by text at the time the value is returned.
Win32 error codes |
Description |
---|---|
0x00000000 ERROR_SUCCESS |
The operation completed successfully. |
0x00000000 NERR_Success |
The operation completed successfully. |
0x00000001 ERROR_INVALID_FUNCTION |
Incorrect function. |
0x00000002 ERROR_FILE_NOT_FOUND |
The system cannot find the file specified. |
0x00000003 ERROR_PATH_NOT_FOUND |
The system cannot find the path specified. |
0x00000004 ERROR_TOO_MANY_OPEN_FILES |
The system cannot open the file. |
0x00000005 ERROR_ACCESS_DENIED |
Access is denied. |
0x00000006 ERROR_INVALID_HANDLE |
The handle is invalid. |
0x00000007 ERROR_ARENA_TRASHED |
The storage control blocks were destroyed. |
0x00000008 ERROR_NOT_ENOUGH_MEMORY |
Not enough storage is available to process this command. |
0x00000009 ERROR_INVALID_BLOCK |
The storage control block address is invalid. |
0x0000000A ERROR_BAD_ENVIRONMENT |
The environment is incorrect. |
0x0000000B ERROR_BAD_FORMAT |
An attempt was made to load a program with an incorrect format. |
0x0000000C ERROR_INVALID_ACCESS |
The access code is invalid. |
0x0000000D ERROR_INVALID_DATA |
The data is invalid. |
0x0000000E ERROR_OUTOFMEMORY |
Not enough storage is available to complete this operation. |
0x0000000F ERROR_INVALID_DRIVE |
The system cannot find the drive specified. |
0x00000010 ERROR_CURRENT_DIRECTORY |
The directory cannot be removed. |
0x00000011 ERROR_NOT_SAME_DEVICE |
The system cannot move the file to a different disk drive. |
0x00000012 ERROR_NO_MORE_FILES |
There are no more files. |
0x00000013 ERROR_WRITE_PROTECT |
The media is write-protected. |
0x00000014 ERROR_BAD_UNIT |
The system cannot find the device specified. |
0x00000015 ERROR_NOT_READY |
The device is not ready. |
0x00000016 ERROR_BAD_COMMAND |
The device does not recognize the command. |
0x00000017 ERROR_CRC |
Data error (cyclic redundancy check). |
0x00000018 ERROR_BAD_LENGTH |
The program issued a command but the command length is incorrect. |
0x00000019 ERROR_SEEK |
The drive cannot locate a specific area or track on the disk. |
0x0000001A ERROR_NOT_DOS_DISK |
The specified disk cannot be accessed. |
0x0000001B ERROR_SECTOR_NOT_FOUND |
The drive cannot find the sector requested. |
0x0000001C ERROR_OUT_OF_PAPER |
The printer is out of paper. |
0x0000001D ERROR_WRITE_FAULT |
The system cannot write to the specified device. |
0x0000001E ERROR_READ_FAULT |
The system cannot read from the specified device. |
0x0000001F ERROR_GEN_FAILURE |
A device attached to the system is not functioning. |
0x00000020 ERROR_SHARING_VIOLATION |
The process cannot access the file because it is being used by another process. |
0x00000021 ERROR_LOCK_VIOLATION |
The process cannot access the file because another process has locked a portion of the file. |
0x00000022 ERROR_WRONG_DISK |
The wrong disk is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1. |
0x00000024 ERROR_SHARING_BUFFER_EXCEEDED |
Too many files opened for sharing. |
0x00000026 ERROR_HANDLE_EOF |
Reached the end of the file. |
0x00000027 ERROR_HANDLE_DISK_FULL |
The disk is full. |
0x00000032 ERROR_NOT_SUPPORTED |
The request is not supported. |
0x00000033 ERROR_REM_NOT_LIST |
Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator. |
0x00000034 ERROR_DUP_NAME |
You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name, and then try again. |
0x00000035 ERROR_BAD_NETPATH |
The network path was not found. |
0x00000036 ERROR_NETWORK_BUSY |
The network is busy. |
0x00000037 ERROR_DEV_NOT_EXIST |
The specified network resource or device is no longer available. |
0x00000038 ERROR_TOO_MANY_CMDS |
The network BIOS command limit has been reached. |
0x00000039 ERROR_ADAP_HDW_ERR |
A network adapter hardware error occurred. |
0x0000003A ERROR_BAD_NET_RESP |
The specified server cannot perform the requested operation. |
0x0000003B ERROR_UNEXP_NET_ERR |
An unexpected network error occurred. |
0x0000003C ERROR_BAD_REM_ADAP |
The remote adapter is not compatible. |
0x0000003D ERROR_PRINTQ_FULL |
The print queue is full. |
0x0000003E ERROR_NO_SPOOL_SPACE |
Space to store the file waiting to be printed is not available on the server. |
0x0000003F ERROR_PRINT_CANCELLED |
Your file waiting to be printed was deleted. |
0x00000040 ERROR_NETNAME_DELETED |
The specified network name is no longer available. |
0x00000041 ERROR_NETWORK_ACCESS_DENIED |
Network access is denied. |
0x00000042 ERROR_BAD_DEV_TYPE |
The network resource type is not correct. |
0x00000043 ERROR_BAD_NET_NAME |
The network name cannot be found. |
0x00000044 ERROR_TOO_MANY_NAMES |
The name limit for the local computer network adapter card was exceeded. |
0x00000045 ERROR_TOO_MANY_SESS |
The network BIOS session limit was exceeded. |
0x00000046 ERROR_SHARING_PAUSED |
The remote server has been paused or is in the process of being started. |
0x00000047 ERROR_REQ_NOT_ACCEP |
No more connections can be made to this remote computer at this time because the computer has accepted the maximum number of connections. |
0x00000048 ERROR_REDIR_PAUSED |
The specified printer or disk device has been paused. |
0x00000050 ERROR_FILE_EXISTS |
The file exists. |
0x00000052 ERROR_CANNOT_MAKE |
The directory or file cannot be created. |
0x00000053 ERROR_FAIL_I24 |
Fail on INT 24. |
0x00000054 ERROR_OUT_OF_STRUCTURES |
Storage to process this request is not available. |
0x00000055 ERROR_ALREADY_ASSIGNED |
The local device name is already in use. |
0x00000056 ERROR_INVALID_PASSWORD |
The specified network password is not correct. |
0x00000057 ERROR_INVALID_PARAMETER |
The parameter is incorrect. |
0x00000058 ERROR_NET_WRITE_FAULT |
A write fault occurred on the network. |
0x00000059 ERROR_NO_PROC_SLOTS |
The system cannot start another process at this time. |
0x00000064 ERROR_TOO_MANY_SEMAPHORES |
Cannot create another system semaphore. |
0x00000065 ERROR_EXCL_SEM_ALREADY_OWNED |
The exclusive semaphore is owned by another process. |
0x00000066 ERROR_SEM_IS_SET |
The semaphore is set and cannot be closed. |
0x00000067 ERROR_TOO_MANY_SEM_REQUESTS |
The semaphore cannot be set again. |
0x00000068 ERROR_INVALID_AT_INTERRUPT_TIME |
Cannot request exclusive semaphores at interrupt time. |
0x00000069 ERROR_SEM_OWNER_DIED |
The previous ownership of this semaphore has ended. |
0x0000006A ERROR_SEM_USER_LIMIT |
Insert the disk for drive %1. |
0x0000006B ERROR_DISK_CHANGE |
The program stopped because an alternate disk was not inserted. |
0x0000006C ERROR_DRIVE_LOCKED |
The disk is in use or locked by another process. |
0x0000006D ERROR_BROKEN_PIPE |
The pipe has been ended. |
0x0000006E ERROR_OPEN_FAILED |
The system cannot open the device or file specified. |
0x0000006F ERROR_BUFFER_OVERFLOW |
The file name is too long. |
0x00000070 ERROR_DISK_FULL |
There is not enough space on the disk. |
0x00000071 ERROR_NO_MORE_SEARCH_HANDLES |
No more internal file identifiers are available. |
0x00000072 ERROR_INVALID_TARGET_HANDLE |
The target internal file identifier is incorrect. |
0x00000075 ERROR_INVALID_CATEGORY |
The Input Output Control (IOCTL) call made by the application program is not correct. |
0x00000076 ERROR_INVALID_VERIFY_SWITCH |
The verify-on-write switch parameter value is not correct. |
0x00000077 ERROR_BAD_DRIVER_LEVEL |
The system does not support the command requested. |
0x00000078 ERROR_CALL_NOT_IMPLEMENTED |
This function is not supported on this system. |
0x00000079 ERROR_SEM_TIMEOUT |
The semaphore time-out period has expired. |
0x0000007A ERROR_INSUFFICIENT_BUFFER |
The data area passed to a system call is too small. |
0x0000007B ERROR_INVALID_NAME |
The file name, directory name, or volume label syntax is incorrect. |
0x0000007C ERROR_INVALID_LEVEL |
The system call level is not correct. |
0x0000007D ERROR_NO_VOLUME_LABEL |
The disk has no volume label. |
0x0000007E ERROR_MOD_NOT_FOUND |
The specified module could not be found. |
0x0000007F ERROR_PROC_NOT_FOUND |
The specified procedure could not be found. |
0x00000080 ERROR_WAIT_NO_CHILDREN |
There are no child processes to wait for. |
0x00000081 ERROR_CHILD_NOT_COMPLETE |
The %1 application cannot be run in Win32 mode. |
0x00000082 ERROR_DIRECT_ACCESS_HANDLE |
Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. |
0x00000083 ERROR_NEGATIVE_SEEK |
An attempt was made to move the file pointer before the beginning of the file. |
0x00000084 ERROR_SEEK_ON_DEVICE |
The file pointer cannot be set on the specified device or file. |
0x00000085 ERROR_IS_JOIN_TARGET |
A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. |
0x00000086 ERROR_IS_JOINED |
An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. |
0x00000087 ERROR_IS_SUBSTED |
An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. |
0x00000088 ERROR_NOT_JOINED |
The system tried to delete the JOIN of a drive that is not joined. |
0x00000089 ERROR_NOT_SUBSTED |
The system tried to delete the substitution of a drive that is not substituted. |
0x0000008A ERROR_JOIN_TO_JOIN |
The system tried to join a drive to a directory on a joined drive. |
0x0000008B ERROR_SUBST_TO_SUBST |
The system tried to substitute a drive to a directory on a substituted drive. |
0x0000008C ERROR_JOIN_TO_SUBST |
The system tried to join a drive to a directory on a substituted drive. |
0x0000008D ERROR_SUBST_TO_JOIN |
The system tried to SUBST a drive to a directory on a joined drive. |
0x0000008E ERROR_BUSY_DRIVE |
The system cannot perform a JOIN or SUBST at this time. |
0x0000008F ERROR_SAME_DRIVE |
The system cannot join or substitute a drive to or for a directory on the same drive. |
0x00000090 ERROR_DIR_NOT_ROOT |
The directory is not a subdirectory of the root directory. |
0x00000091 ERROR_DIR_NOT_EMPTY |
The directory is not empty. |
0x00000092 ERROR_IS_SUBST_PATH |
The path specified is being used in a substitute. |
0x00000093 ERROR_IS_JOIN_PATH |
Not enough resources are available to process this command. |
0x00000094 ERROR_PATH_BUSY |
The path specified cannot be used at this time. |
0x00000095 ERROR_IS_SUBST_TARGET |
An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. |
0x00000096 ERROR_SYSTEM_TRACE |
System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed. |
0x00000097 ERROR_INVALID_EVENT_COUNT |
The number of specified semaphore events for DosMuxSemWait is not correct. |
0x00000098 ERROR_TOO_MANY_MUXWAITERS |
DosMuxSemWait did not execute; too many semaphores are already set. |
0x00000099 ERROR_INVALID_LIST_FORMAT |
The DosMuxSemWait list is not correct. |
0x0000009A ERROR_LABEL_TOO_LONG |
The volume label you entered exceeds the label character limit of the destination file system. |
0x0000009B ERROR_TOO_MANY_TCBS |
Cannot create another thread. |
0x0000009C ERROR_SIGNAL_REFUSED |
The recipient process has refused the signal. |
0x0000009D ERROR_DISCARDED |
The segment is already discarded and cannot be locked. |
0x0000009E ERROR_NOT_LOCKED |
The segment is already unlocked. |
0x0000009F ERROR_BAD_THREADID_ADDR |
The address for the thread ID is not correct. |
0x000000A0 ERROR_BAD_ARGUMENTS |
One or more arguments are not correct. |
0x000000A1 ERROR_BAD_PATHNAME |
The specified path is invalid. |
0x000000A2 ERROR_SIGNAL_PENDING |
A signal is already pending. |
0x000000A4 ERROR_MAX_THRDS_REACHED |
No more threads can be created in the system. |
0x000000A7 ERROR_LOCK_FAILED |
Unable to lock a region of a file. |
0x000000AA ERROR_BUSY |
The requested resource is in use. |
0x000000AD ERROR_CANCEL_VIOLATION |
A lock request was not outstanding for the supplied cancel region. |
0x000000AE ERROR_ATOMIC_LOCKS_NOT_SUPPORTED |
The file system does not support atomic changes to the lock type. |
0x000000B4 ERROR_INVALID_SEGMENT_NUMBER |
The system detected a segment number that was not correct. |
0x000000B6 ERROR_INVALID_ORDINAL |
The operating system cannot run %1. |
0x000000B7 ERROR_ALREADY_EXISTS |
Cannot create a file when that file already exists. |
0x000000BA ERROR_INVALID_FLAG_NUMBER |
The flag passed is not correct. |
0x000000BB ERROR_SEM_NOT_FOUND |
The specified system semaphore name was not found. |
0x000000BC ERROR_INVALID_STARTING_CODESEG |
The operating system cannot run %1. |
0x000000BD ERROR_INVALID_STACKSEG |
The operating system cannot run %1. |
0x000000BE ERROR_INVALID_MODULETYPE |
The operating system cannot run %1. |
0x000000BF ERROR_INVALID_EXE_SIGNATURE |
Cannot run %1 in Win32 mode. |
0x000000C0 ERROR_EXE_MARKED_INVALID |
The operating system cannot run %1. |
0x000000C1 ERROR_BAD_EXE_FORMAT |
%1 is not a valid Win32 application. |
0x000000C2 ERROR_ITERATED_DATA_EXCEEDS_64k |
The operating system cannot run %1. |
0x000000C3 ERROR_INVALID_MINALLOCSIZE |
The operating system cannot run %1. |
0x000000C4 ERROR_DYNLINK_FROM_INVALID_RING |
The operating system cannot run this application program. |
0x000000C5 ERROR_IOPL_NOT_ENABLED |
The operating system is not presently configured to run this application. |
0x000000C6 ERROR_INVALID_SEGDPL |
The operating system cannot run %1. |
0x000000C7 ERROR_AUTODATASEG_EXCEEDS_64k |
The operating system cannot run this application program. |
0x000000C8 ERROR_RING2SEG_MUST_BE_MOVABLE |
The code segment cannot be greater than or equal to 64 KB. |
0x000000C9 ERROR_RELOC_CHAIN_XEEDS_SEGLIM |
The operating system cannot run %1. |
0x000000CA ERROR_INFLOOP_IN_RELOC_CHAIN |
The operating system cannot run %1. |
0x000000CB ERROR_ENVVAR_NOT_FOUND |
The system could not find the environment option that was entered. |
0x000000CD ERROR_NO_SIGNAL_SENT |
No process in the command subtree has a signal handler. |
0x000000CE ERROR_FILENAME_EXCED_RANGE |
The file name or extension is too long. |
0x000000CF ERROR_RING2_STACK_IN_USE |
The ring 2 stack is in use. |
0x000000D0 ERROR_META_EXPANSION_TOO_LONG |
The asterisk (*) or question mark (?) global file name characters are entered incorrectly, or too many global file name characters are specified. |
0x000000D1 ERROR_INVALID_SIGNAL_NUMBER |
The signal being posted is not correct. |
0x000000D2 ERROR_THREAD_1_INACTIVE |
The signal handler cannot be set. |
0x000000D4 ERROR_LOCKED |
The segment is locked and cannot be reallocated. |
0x000000D6 ERROR_TOO_MANY_MODULES |
Too many dynamic-link modules are attached to this program or dynamic-link module. |
0x000000D7 ERROR_NESTING_NOT_ALLOWED |
Cannot nest calls to LoadModule. |
0x000000D8 ERROR_EXE_MACHINE_TYPE_MISMATCH |
This version of %1 is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher. |
0x000000D9 ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY |
The image file %1 is signed, unable to modify. |
0x000000DA ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY |
The image file %1 is strong signed, unable to modify. |
0x000000DC ERROR_FILE_CHECKED_OUT |
This file is checked out or locked for editing by another user. |
0x000000DD ERROR_CHECKOUT_REQUIRED |
The file must be checked out before saving changes. |
0x000000DE ERROR_BAD_FILE_TYPE |
The file type being saved or retrieved has been blocked. |
0x000000DF ERROR_FILE_TOO_LARGE |
The file size exceeds the limit allowed and cannot be saved. |
0x000000E0 ERROR_FORMS_AUTH_REQUIRED |
Access denied. Before opening files in this location, you must first browse to the website and select the option to sign in automatically. |
0x000000E1 ERROR_VIRUS_INFECTED |
Operation did not complete successfully because the file contains a virus. |
0x000000E2 ERROR_VIRUS_DELETED |
This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location. |
0x000000E5 ERROR_PIPE_LOCAL |
The pipe is local. |
0x000000E6 ERROR_BAD_PIPE |
The pipe state is invalid. |
0x000000E7 ERROR_PIPE_BUSY |
All pipe instances are busy. |
0x000000E8 ERROR_NO_DATA |
The pipe is being closed. |
0x000000E9 ERROR_PIPE_NOT_CONNECTED |
No process is on the other end of the pipe. |
0x000000EA ERROR_MORE_DATA |
More data is available. |
0x000000F0 ERROR_VC_DISCONNECTED |
The session was canceled. |
0x000000FE ERROR_INVALID_EA_NAME |
The specified extended attribute name was invalid. |
0x000000FF ERROR_EA_LIST_INCONSISTENT |
The extended attributes are inconsistent. |
0x00000102 WAIT_TIMEOUT |
The wait operation timed out. |
0x00000103 ERROR_NO_MORE_ITEMS |
No more data is available. |
0x0000010A ERROR_CANNOT_COPY |
The copy functions cannot be used. |
0x0000010B ERROR_DIRECTORY |
The directory name is invalid. |
0x00000113 ERROR_EAS_DIDNT_FIT |
The extended attributes did not fit in the buffer. |
0x00000114 ERROR_EA_FILE_CORRUPT |
The extended attribute file on the mounted file system is corrupt. |
0x00000115 ERROR_EA_TABLE_FULL |
The extended attribute table file is full. |
0x00000116 ERROR_INVALID_EA_HANDLE |
The specified extended attribute handle is invalid. |
0x0000011A ERROR_EAS_NOT_SUPPORTED |
The mounted file system does not support extended attributes. |
0x00000120 ERROR_NOT_OWNER |
Attempt to release mutex not owned by caller. |
0x0000012A ERROR_TOO_MANY_POSTS |
Too many posts were made to a semaphore. |
0x0000012B ERROR_PARTIAL_COPY |
Only part of a ReadProcessMemory or WriteProcessMemory request was completed. |
0x0000012C ERROR_OPLOCK_NOT_GRANTED |
The oplock request is denied. |
0x0000012D ERROR_INVALID_OPLOCK_PROTOCOL |
An invalid oplock acknowledgment was received by the system. |
0x0000012E ERROR_DISK_TOO_FRAGMENTED |
The volume is too fragmented to complete this operation. |
0x0000012F ERROR_DELETE_PENDING |
The file cannot be opened because it is in the process of being deleted. |
0x0000013D ERROR_MR_MID_NOT_FOUND |
The system cannot find message text for message number 0x%1 in the message file for %2. |
0x0000013E ERROR_SCOPE_NOT_FOUND |
The scope specified was not found. |
0x0000015E ERROR_FAIL_NOACTION_REBOOT |
No action was taken because a system reboot is required. |
0x0000015F ERROR_FAIL_SHUTDOWN |
The shutdown operation failed. |
0x00000160 ERROR_FAIL_RESTART |
The restart operation failed. |
0x00000161 ERROR_MAX_SESSIONS_REACHED |
The maximum number of sessions has been reached. |
0x00000190 ERROR_THREAD_MODE_ALREADY_BACKGROUND |
The thread is already in background processing mode. |
0x00000191 ERROR_THREAD_MODE_NOT_BACKGROUND |
The thread is not in background processing mode. |
0x00000192 ERROR_PROCESS_MODE_ALREADY_BACKGROUND |
The process is already in background processing mode. |
0x00000193 ERROR_PROCESS_MODE_NOT_BACKGROUND |
The process is not in background processing mode. |
0x000001E7 ERROR_INVALID_ADDRESS |
Attempt to access invalid address. |
0x000001F4 ERROR_USER_PROFILE_LOAD |
User profile cannot be loaded. |
0x00000216 ERROR_ARITHMETIC_OVERFLOW |
Arithmetic result exceeded 32 bits. |
0x00000217 ERROR_PIPE_CONNECTED |
There is a process on the other end of the pipe. |
0x00000218 ERROR_PIPE_LISTENING |
Waiting for a process to open the other end of the pipe. |
0x00000219 ERROR_VERIFIER_STOP |
Application verifier has found an error in the current process. |
0x0000021A ERROR_ABIOS_ERROR |
An error occurred in the ABIOS subsystem. |
0x0000021B ERROR_WX86_WARNING |
A warning occurred in the WX86 subsystem. |
0x0000021C ERROR_WX86_ERROR |
An error occurred in the WX86 subsystem. |
0x0000021D ERROR_TIMER_NOT_CANCELED |
An attempt was made to cancel or set a timer that has an associated asynchronous procedure call (APC) and the subject thread is not the thread that originally set the timer with an associated APC routine. |
0x0000021E ERROR_UNWIND |
Unwind exception code. |
0x0000021F ERROR_BAD_STACK |
An invalid or unaligned stack was encountered during an unwind operation. |
0x00000220 ERROR_INVALID_UNWIND_TARGET |
An invalid unwind target was encountered during an unwind operation. |
0x00000221 ERROR_INVALID_PORT_ATTRIBUTES |
Invalid object attributes specified to NtCreatePort or invalid port attributes specified to NtConnectPort. |
0x00000222 ERROR_PORT_MESSAGE_TOO_LONG |
Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port. |
0x00000223 ERROR_INVALID_QUOTA_LOWER |
An attempt was made to lower a quota limit below the current usage. |
0x00000224 ERROR_DEVICE_ALREADY_ATTACHED |
An attempt was made to attach to a device that was already attached to another device. |
0x00000225 ERROR_INSTRUCTION_MISALIGNMENT |
An attempt was made to execute an instruction at an unaligned address, and the host system does not support unaligned instruction references. |
0x00000226 ERROR_PROFILING_NOT_STARTED |
Profiling not started. |
0x00000227 ERROR_PROFILING_NOT_STOPPED |
Profiling not stopped. |
0x00000228 ERROR_COULD_NOT_INTERPRET |
The passed ACL did not contain the minimum required information. |
0x00000229 ERROR_PROFILING_AT_LIMIT |
The number of active profiling objects is at the maximum and no more can be started. |
0x0000022A ERROR_CANT_WAIT |
Used to indicate that an operation cannot continue without blocking for I/O. |
0x0000022B ERROR_CANT_TERMINATE_SELF |
Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process. |
0x0000022C ERROR_UNEXPECTED_MM_CREATE_ERR |
If an MM error is returned that is not defined in the standard FsRtl filter, it is converted to one of the following errors that is guaranteed to be in the filter. In this case, information is lost; however, the filter correctly handles the exception. |
0x0000022D ERROR_UNEXPECTED_MM_MAP_ERROR |
If an MM error is returned that is not defined in the standard FsRtl filter, it is converted to one of the following errors that is guaranteed to be in the filter. In this case, information is lost; however, the filter correctly handles the exception. |
0x0000022E ERROR_UNEXPECTED_MM_EXTEND_ERR |
If an MM error is returned that is not defined in the standard FsRtl filter, it is converted to one of the following errors that is guaranteed to be in the filter. In this case, information is lost; however, the filter correctly handles the exception. |
0x0000022F ERROR_BAD_FUNCTION_TABLE |
A malformed function table was encountered during an unwind operation. |
0x00000230 ERROR_NO_GUID_TRANSLATION |
Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which might cause a file creation attempt to fail. |
0x00000231 ERROR_INVALID_LDT_SIZE |
Indicates that an attempt was made to grow a local domain table (LDT) by setting its size, or that the size was not an even number of selectors. |
0x00000233 ERROR_INVALID_LDT_OFFSET |
Indicates that the starting value for the LDT information was not an integral multiple of the selector size. |
0x00000234 ERROR_INVALID_LDT_DESCRIPTOR |
Indicates that the user supplied an invalid descriptor when trying to set up LDT descriptors. |
0x00000235 ERROR_TOO_MANY_THREADS |
Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token can be performed only when a process has zero or one threads. |
0x00000236 ERROR_THREAD_NOT_IN_PROCESS |
An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified. |
0x00000237 ERROR_PAGEFILE_QUOTA_EXCEEDED |
Page file quota was exceeded. |
0x00000238 ERROR_LOGON_SERVER_CONFLICT |
The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role. |
0x00000239 ERROR_SYNCHRONIZATION_REQUIRED |
On applicable Windows Server releases, the Security Accounts Manager (SAM) database is significantly out of synchronization with the copy on the domain controller. A complete synchronization is required. |
0x0000023A ERROR_NET_OPEN_FAILED |
The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows LAN Manager Redirector to use in its internal error mapping routines. |
0x0000023B ERROR_IO_PRIVILEGE_FAILED |
{Privilege Failed} The I/O permissions for the process could not be changed. |
0x0000023C ERROR_CONTROL_C_EXIT |
{Application Exit by CTRL+C} The application terminated as a result of a CTRL+C. |
0x0000023D ERROR_MISSING_SYSTEMFILE |
{Missing System File} The required system file %hs is bad or missing. |
0x0000023E ERROR_UNHANDLED_EXCEPTION |
{Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx. |
0x0000023F ERROR_APP_INIT_FAILURE |
{Application Error} The application failed to initialize properly (0x%lx). Click OK to terminate the application. |
0x00000240 ERROR_PAGEFILE_CREATE_FAILED |
{Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld. |
0x00000241 ERROR_INVALID_IMAGE_HASH |
The hash for the image cannot be found in the system catalogs. The image is likely corrupt or the victim of tampering. |
0x00000242 ERROR_NO_PAGEFILE |
{No Paging File Specified} No paging file was specified in the system configuration. |
0x00000243 ERROR_ILLEGAL_FLOAT_CONTEXT |
{EXCEPTION} A real-mode application issued a floating-point instruction, and floating-point hardware is not present. |
0x00000244 ERROR_NO_EVENT_PAIR |
An event pair synchronization operation was performed using the thread-specific client/server event pair object, but no event pair object was associated with the thread. |
0x00000245 ERROR_DOMAIN_CTRLR_CONFIG_ERROR |
A domain server has an incorrect configuration. |
0x00000246 ERROR_ILLEGAL_CHARACTER |
An illegal character was encountered. For a multibyte character set, this includes a lead byte without a succeeding trail byte. For the Unicode character set, this includes the characters 0xFFFF and 0xFFFE. |
0x00000247 ERROR_UNDEFINED_CHARACTER |
The Unicode character is not defined in the Unicode character set installed on the system. |
0x00000248 ERROR_FLOPPY_VOLUME |
The paging file cannot be created on a floppy disk. |
0x00000249 ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT |
The system bios failed to connect a system interrupt to the device or bus for which the device is connected. |
0x0000024A ERROR_BACKUP_CONTROLLER |
This operation is only allowed for the primary domain controller (PDC) of the domain. |
0x0000024B ERROR_MUTANT_LIMIT_EXCEEDED |
An attempt was made to acquire a mutant such that its maximum count would have been exceeded. |
0x0000024C ERROR_FS_DRIVER_REQUIRED |
A volume has been accessed for which a file system driver is required that has not yet been loaded. |
0x0000024D ERROR_CANNOT_LOAD_REGISTRY_FILE |
{Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable. |
0x0000024E ERROR_DEBUG_ATTACH_FAILED |
{Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. Choosing OK will terminate the process, and choosing Cancel will ignore the error. |
0x0000024F ERROR_SYSTEM_PROCESS_TERMINATED |
{Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down. |
0x00000250 ERROR_DATA_NOT_ACCEPTED |
{Data Not Accepted} The transport driver interface (TDI) client could not handle the data received during an indication. |
0x00000251 ERROR_VDM_HARD_ERROR |
The NT Virtual DOS Machine (NTVDM) encountered a hard error. |
0x00000252 ERROR_DRIVER_CANCEL_TIMEOUT |
{Cancel Timeout} The driver %hs failed to complete a canceled I/O request in the allotted time. |
0x00000253 ERROR_REPLY_MESSAGE_MISMATCH |
{Reply Message Mismatch} An attempt was made to reply to a local procedure call (LPC) message, but the thread specified by the client ID in the message was not waiting on that message. |
0x00000254 ERROR_LOST_WRITEBEHIND_DATA |
{Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error might be caused by a failure of your computer hardware or network connection. Try to save this file elsewhere. |
0x00000255 ERROR_CLIENT_SERVER_PARAMETERS_INVALID |
The parameters passed to the server in the client/server shared memory window were invalid. Too much data might have been put in the shared memory window. |
0x00000256 ERROR_NOT_TINY_STREAM |
The stream is not a tiny stream. |
0x00000257 ERROR_STACK_OVERFLOW_READ |
The request must be handled by the stack overflow code. |
0x00000258 ERROR_CONVERT_TO_LARGE |
Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream. |
0x00000259 ERROR_FOUND_OUT_OF_SCOPE |
The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation. |
0x0000025A ERROR_ALLOCATE_BUCKET |
The bucket array must be grown. Retry transaction after doing so. |
0x0000025B ERROR_MARSHALL_OVERFLOW |
The user/kernel marshaling buffer has overflowed. |
0x0000025C ERROR_INVALID_VARIANT |
The supplied variant structure contains invalid data. |
0x0000025D ERROR_BAD_COMPRESSION_BUFFER |
The specified buffer contains ill-formed data. |
0x0000025E ERROR_AUDIT_FAILED |
{Audit Failed} An attempt to generate a security audit failed. |
0x0000025F ERROR_TIMER_RESOLUTION_NOT_SET |
The timer resolution was not previously set by the current process. |
0x00000260 ERROR_INSUFFICIENT_LOGON_INFO |
There is insufficient account information to log you on. |
0x00000261 ERROR_BAD_DLL_ENTRYPOINT |
{Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entry point should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO can cause the application to operate incorrectly. |
0x00000262 ERROR_BAD_SERVICE_ENTRYPOINT |
{Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entry point should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process might operate incorrectly. |
0x00000263 ERROR_IP_ADDRESS_CONFLICT1 |
There is an IP address conflict with another system on the network. |
0x00000264 ERROR_IP_ADDRESS_CONFLICT2 |
There is an IP address conflict with another system on the network. |
0x00000265 ERROR_REGISTRY_QUOTA_LIMIT |
{Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored. |
0x00000266 ERROR_NO_CALLBACK_ACTIVE |
A callback return system service cannot be executed when no callback is active. |
0x00000267 ERROR_PWD_TOO_SHORT |
The password provided is too short to meet the policy of your user account. Choose a longer password. |
0x00000268 ERROR_PWD_TOO_RECENT |
The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised, contact your administrator immediately to have a new one assigned. |
0x00000269 ERROR_PWD_HISTORY_CONFLICT |
You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Select a password that you have not previously used. |
0x0000026A ERROR_UNSUPPORTED_COMPRESSION |
The specified compression format is unsupported. |
0x0000026B ERROR_INVALID_HW_PROFILE |
The specified hardware profile configuration is invalid. |
0x0000026C ERROR_INVALID_PLUGPLAY_DEVICE_PATH |
The specified Plug and Play registry device path is invalid. |
0x0000026D ERROR_QUOTA_LIST_INCONSISTENT |
The specified quota list is internally inconsistent with its descriptor. |
0x0000026E ERROR_EVALUATION_EXPIRATION |
{Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shut down in 1 hour. To restore access to this installation of Windows, upgrade this installation using a licensed distribution of this product. |
0x0000026F ERROR_ILLEGAL_DLL_RELOCATION |
{Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL. |
0x00000270 ERROR_DLL_INIT_FAILED_LOGOFF |
{DLL Initialization Failed} The application failed to initialize because the window station is shutting down. |
0x00000271 ERROR_VALIDATE_CONTINUE |
The validation process needs to continue on to the next step. |
0x00000272 ERROR_NO_MORE_MATCHES |
There are no more matches for the current index enumeration. |
0x00000273 ERROR_RANGE_LIST_CONFLICT |
The range could not be added to the range list because of a conflict. |
0x00000274 ERROR_SERVER_SID_MISMATCH |
The server process is running under a SID different than that required by the client. |
0x00000275 ERROR_CANT_ENABLE_DENY_ONLY |
A group marked use for deny only cannot be enabled. |
0x00000276 ERROR_FLOAT_MULTIPLE_FAULTS |
{EXCEPTION} Multiple floating point faults. |
0x00000277 ERROR_FLOAT_MULTIPLE_TRAPS |
{EXCEPTION} Multiple floating point traps. |
0x00000278 ERROR_NOINTERFACE |
The requested interface is not supported. |
0x00000279 ERROR_DRIVER_FAILED_SLEEP |
{System Standby Failed} The driver %hs does not support standby mode. Updating this driver might allow the system to go to standby mode. |
0x0000027A ERROR_CORRUPT_SYSTEM_FILE |
The system file %1 has become corrupt and has been replaced. |
0x0000027B ERROR_COMMITMENT_MINIMUM |
{Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications might be denied. For more information, see Help. |
0x0000027C ERROR_PNP_RESTART_ENUMERATION |
A device was removed so enumeration must be restarted. |
0x0000027D ERROR_SYSTEM_IMAGE_BAD_SIGNATURE |
{Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down. |
0x0000027E ERROR_PNP_REBOOT_REQUIRED |
Device will not start without a reboot. |
0x0000027F ERROR_INSUFFICIENT_POWER |
There is not enough power to complete the requested operation. |
0x00000281 ERROR_SYSTEM_SHUTDOWN |
The system is in the process of shutting down. |
0x00000282 ERROR_PORT_NOT_SET |
An attempt to remove a process DebugPort was made, but a port was not already associated with the process. |
0x00000283 ERROR_DS_VERSION_CHECK_FAILURE |
This version of Windows is not compatible with the behavior version of directory forest, domain, or domain controller. |
0x00000284 ERROR_RANGE_NOT_FOUND |
The specified range could not be found in the range list. |
0x00000286 ERROR_NOT_SAFE_MODE_DRIVER |
The driver was not loaded because the system is booting into safe mode. |
0x00000287 ERROR_FAILED_DRIVER_ENTRY |
The driver was not loaded because it failed its initialization call. |
0x00000288 ERROR_DEVICE_ENUMERATION_ERROR |
The device encountered an error while applying power or reading the device configuration. This might be caused by a failure of your hardware or by a poor connection. |
0x00000289 ERROR_MOUNT_POINT_NOT_RESOLVED |
The create operation failed because the name contained at least one mount point that resolves to a volume to which the specified device object is not attached. |
0x0000028A ERROR_INVALID_DEVICE_OBJECT_PARAMETER |
The device object parameter is either not a valid device object or is not attached to the volume specified by the file name. |
0x0000028B ERROR_MCA_OCCURED |
A machine check error has occurred. Check the system event log for additional information. |
0x0000028C ERROR_DRIVER_DATABASE_ERROR |
There was an error [%2] processing the driver database. |
0x0000028D ERROR_SYSTEM_HIVE_TOO_LARGE |
The system hive size has exceeded its limit. |
0x0000028E ERROR_DRIVER_FAILED_PRIOR_UNLOAD |
The driver could not be loaded because a previous version of the driver is still in memory. |
0x0000028F ERROR_VOLSNAP_PREPARE_HIBERNATE |
{Volume Shadow Copy Service} Wait while the Volume Shadow Copy Service prepares volume %hs for hibernation. |
0x00000290 ERROR_HIBERNATION_FAILURE |
The system has failed to hibernate (the error code is %hs). Hibernation will be disabled until the system is restarted. |
0x00000299 ERROR_FILE_SYSTEM_LIMITATION |
The requested operation could not be completed due to a file system limitation. |
0x0000029C ERROR_ASSERTION_FAILURE |
An assertion failure has occurred. |
0x0000029D ERROR_ACPI_ERROR |
An error occurred in the Advanced Configuration and Power Interface (ACPI) subsystem. |
0x0000029E ERROR_WOW_ASSERTION |
WOW assertion error. |
0x0000029F ERROR_PNP_BAD_MPS_TABLE |
A device is missing in the system BIOS MultiProcessor Specification (MPS) table. This device will not be used. Contact your system vendor for system BIOS update. |
0x000002A0 ERROR_PNP_TRANSLATION_FAILED |
A translator failed to translate resources. |
0x000002A1 ERROR_PNP_IRQ_TRANSLATION_FAILED |
An interrupt request (IRQ) translator failed to translate resources. |
0x000002A2 ERROR_PNP_INVALID_ID |
Driver %2 returned invalid ID for a child device (%3). |
0x000002A3 ERROR_WAKE_SYSTEM_DEBUGGER |
{Kernel Debugger Awakened} the system debugger was awakened by an interrupt. |
0x000002A4 ERROR_HANDLES_CLOSED |
{Handles Closed} Handles to objects have been automatically closed because of the requested operation. |
0x000002A5 ERROR_EXTRANEOUS_INFORMATION |
{Too Much Information} The specified ACL contained more information than was expected. |
0x000002A6 ERROR_RXACT_COMMIT_NECESSARY |
This warning level status indicates that the transaction state already exists for the registry subtree, but that a transaction commit was previously aborted. The commit has NOT been completed, but it has not been rolled back either (so it can still be committed if desired). |
0x000002A7 ERROR_MEDIA_CHECK |
{Media Changed} The media might have changed. |
0x000002A8 ERROR_GUID_SUBSTITUTION_MADE |
{GUID Substitution} During the translation of a GUID to a Windows SID, no administratively defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this might provide more restrictive access than intended. |
0x000002A9 ERROR_STOPPED_ON_SYMLINK |
The create operation stopped after reaching a symbolic link. |
0x000002AA ERROR_LONGJUMP |
A long jump has been executed. |
0x000002AB ERROR_PLUGPLAY_QUERY_VETOED |
The Plug and Play query operation was not successful. |
0x000002AC ERROR_UNWIND_CONSOLIDATE |
A frame consolidation has been executed. |
0x000002AD ERROR_REGISTRY_HIVE_RECOVERED |
{Registry Hive Recovered} Registry hive (file): %hs was corrupted and it has been recovered. Some data might have been lost. |
0x000002AE ERROR_DLL_MIGHT_BE_INSECURE |
The application is attempting to run executable code from the module %hs. This might be insecure. An alternative, %hs, is available. Should the application use the secure module %hs? |
0x000002AF ERROR_DLL_MIGHT_BE_INCOMPATIBLE |
The application is loading executable code from the module %hs. This is secure, but might be incompatible with previous releases of the operating system. An alternative, %hs, is available. Should the application use the secure module %hs? |
0x000002B0 ERROR_DBG_EXCEPTION_NOT_HANDLED |
Debugger did not handle the exception. |
0x000002B1 ERROR_DBG_REPLY_LATER |
Debugger will reply later. |
0x000002B2 ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE |
Debugger cannot provide handle. |
0x000002B3 ERROR_DBG_TERMINATE_THREAD |
Debugger terminated thread. |
0x000002B4 ERROR_DBG_TERMINATE_PROCESS |
Debugger terminated process. |
0x000002B5 ERROR_DBG_CONTROL_C |
Debugger got control C. |
0x000002B6 ERROR_DBG_PRINTEXCEPTION_C |
Debugger printed exception on control C. |
0x000002B7 ERROR_DBG_RIPEXCEPTION |
Debugger received Routing Information Protocol (RIP) exception. |
0x000002B8 ERROR_DBG_CONTROL_BREAK |
Debugger received control break. |
0x000002B9 ERROR_DBG_COMMAND_EXCEPTION |
Debugger command communication exception. |
0x000002BA ERROR_OBJECT_NAME_EXISTS |
{Object Exists} An attempt was made to create an object and the object name already existed. |
0x000002BB ERROR_THREAD_WAS_SUSPENDED |
{Thread Suspended} A thread termination occurred while the thread was suspended. The thread was resumed and termination proceeded. |
0x000002BC ERROR_IMAGE_NOT_AT_BASE |
{Image Relocated} An image file could not be mapped at the address specified in the image file. Local fixes must be performed on this image. |
0x000002BD ERROR_RXACT_STATE_CREATED |
This informational level status indicates that a specified registry subtree transaction state did not yet exist and had to be created. |
0x000002BE ERROR_SEGMENT_NOTIFICATION |
{Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An exception is raised so a debugger can load, unload, or track symbols and breakpoints within these 16-bit segments. |
0x000002BF ERROR_BAD_CURRENT_DIRECTORY |
{Invalid Current Directory} The process cannot switch to the startup current directory %hs. Select OK to set current directory to %hs, or select CANCEL to exit. |
0x000002C0 ERROR_FT_READ_RECOVERY_FROM_BACKUP |
{Redundant Read} To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but it was unable to reassign the failing area of the device. |
0x000002C1 ERROR_FT_WRITE_RECOVERY |
{Redundant Write} To satisfy a write request, the Windows NT operating system fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but it was not able to reassign the failing area of the device. |
0x000002C2 ERROR_IMAGE_MACHINE_TYPE_MISMATCH |
{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load. |
0x000002C3 ERROR_RECEIVE_PARTIAL |
{Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later. |
0x000002C4 ERROR_RECEIVE_EXPEDITED |
{Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote system. |
0x000002C5 ERROR_RECEIVE_PARTIAL_EXPEDITED |
{Partial Expedited Data Received} The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later. |
0x000002C6 ERROR_EVENT_DONE |
{TDI Event Done} The TDI indication has completed successfully. |
0x000002C7 ERROR_EVENT_PENDING |
{TDI Event Pending} The TDI indication has entered the pending state. |
0x000002C8 ERROR_CHECKING_FILE_SYSTEM |
Checking file system on %wZ. |
0x000002C9 ERROR_FATAL_APP_EXIT |
{Fatal Application Exit} %hs. |
0x000002CA ERROR_PREDEFINED_HANDLE |
The specified registry key is referenced by a predefined handle. |
0x000002CB ERROR_WAS_UNLOCKED |
{Page Unlocked} The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory and from the process. |
0x000002CD ERROR_WAS_LOCKED |
{Page Locked} One of the pages to lock was already locked. |
0x000002CF ERROR_ALREADY_WIN32 |
The value already corresponds with a Win 32 error code. |
0x000002D0 ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE |
{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. |
0x000002D1 ERROR_NO_YIELD_PERFORMED |
A yield execution was performed and no thread was available to run. |
0x000002D2 ERROR_TIMER_RESUME_IGNORED |
The resume flag to a timer API was ignored. |
0x000002D3 ERROR_ARBITRATION_UNHANDLED |
The arbiter has deferred arbitration of these resources to its parent. |
0x000002D4 ERROR_CARDBUS_NOT_SUPPORTED |
The inserted CardBus device cannot be started because of a configuration error on %hs"." |
0x000002D5 ERROR_MP_PROCESSOR_MISMATCH |
The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. If problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported. |
0x000002D6 ERROR_HIBERNATED |
The system was put into hibernation. |
0x000002D7 ERROR_RESUME_HIBERNATION |
The system was resumed from hibernation. |
0x000002D8 ERROR_FIRMWARE_UPDATED |
Windows has detected that the system firmware (BIOS) was updated (previous firmware date = %2, current firmware date %3). |
0x000002D9 ERROR_DRIVERS_LEAKING_LOCKED_PAGES |
A device driver is leaking locked I/O pages, causing system degradation. The system has automatically enabled a tracking code to try and catch the culprit. |
0x000002DA ERROR_WAKE_SYSTEM |
The system has awoken. |
0x000002DF ERROR_ABANDONED_WAIT_0 |
The call failed because the handle associated with it was closed. |
0x000002E4 ERROR_ELEVATION_REQUIRED |
The requested operation requires elevation. |
0x000002E5 ERROR_REPARSE |
A reparse should be performed by the object manager because the name of the file resulted in a symbolic link. |
0x000002E6 ERROR_OPLOCK_BREAK_IN_PROGRESS |
An open/create operation completed while an oplock break is underway. |
0x000002E7 ERROR_VOLUME_MOUNTED |
A new volume has been mounted by a file system. |
0x000002E8 ERROR_RXACT_COMMITTED |
This success level status indicates that the transaction state already exists for the registry subtree, but that a transaction commit was previously aborted. The commit has now been completed. |
0x000002E9 ERROR_NOTIFY_CLEANUP |
This indicates that a notify change request has been completed due to closing the handle which made the notify change request. |
0x000002EA ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED |
{Connect Failure on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport, but the connection failed. The computer was able to connect on a secondary transport. |
0x000002EB ERROR_PAGE_FAULT_TRANSITION |
Page fault was a transition fault. |
0x000002EC ERROR_PAGE_FAULT_DEMAND_ZERO |
Page fault was a demand zero fault. |
0x000002ED ERROR_PAGE_FAULT_COPY_ON_WRITE |
Page fault was a demand zero fault. |
0x000002EE ERROR_PAGE_FAULT_GUARD_PAGE |
Page fault was a demand zero fault. |
0x000002EF ERROR_PAGE_FAULT_PAGING_FILE |
Page fault was satisfied by reading from a secondary storage device. |
0x000002F0 ERROR_CACHE_PAGE_LOCKED |
Cached page was locked during operation. |
0x000002F1 ERROR_CRASH_DUMP |
Crash dump exists in paging file. |
0x000002F2 ERROR_BUFFER_ALL_ZEROS |
Specified buffer contains all zeros. |
0x000002F3 ERROR_REPARSE_OBJECT |
A reparse should be performed by the object manager because the name of the file resulted in a symbolic link. |
0x000002F4 ERROR_RESOURCE_REQUIREMENTS_CHANGED |
The device has succeeded a query-stop and its resource requirements have changed. |
0x000002F5 ERROR_TRANSLATION_COMPLETE |
The translator has translated these resources into the global space and no further translations should be performed. |
0x000002F6 ERROR_NOTHING_TO_TERMINATE |
A process being terminated has no threads to terminate. |
0x000002F7 ERROR_PROCESS_NOT_IN_JOB |
The specified process is not part of a job. |
0x000002F8 ERROR_PROCESS_IN_JOB |
The specified process is part of a job. |
0x000002F9 ERROR_VOLSNAP_HIBERNATE_READY |
{Volume Shadow Copy Service} The system is now ready for hibernation. |
0x000002FA ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY |
A file system or file system filter driver has successfully completed an FsFilter operation. |
0x000002FB ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED |
The specified interrupt vector was already connected. |
0x000002FC ERROR_INTERRUPT_STILL_CONNECTED |
The specified interrupt vector is still connected. |
0x000002FD ERROR_WAIT_FOR_OPLOCK |
An operation is blocked waiting for an oplock. |
0x000002FE ERROR_DBG_EXCEPTION_HANDLED |
Debugger handled exception. |
0x000002FF ERROR_DBG_CONTINUE |
Debugger continued. |
0x00000300 ERROR_CALLBACK_POP_STACK |
An exception occurred in a user mode callback and the kernel callback frame should be removed. |
0x00000301 ERROR_COMPRESSION_DISABLED |
Compression is disabled for this volume. |
0x00000302 ERROR_CANTFETCHBACKWARDS |
The data provider cannot fetch backward through a result set. |
0x00000303 ERROR_CANTSCROLLBACKWARDS |
The data provider cannot scroll backward through a result set. |
0x00000304 ERROR_ROWSNOTRELEASED |
The data provider requires that previously fetched data is released before asking for more data. |
0x00000305 ERROR_BAD_ACCESSOR_FLAGS |
The data provider was not able to interpret the flags set for a column binding in an accessor. |
0x00000306 ERROR_ERRORS_ENCOUNTERED |
One or more errors occurred while processing the request. |
0x00000307 ERROR_NOT_CAPABLE |
The implementation is not capable of performing the request. |
0x00000308 ERROR_REQUEST_OUT_OF_SEQUENCE |
The client of a component requested an operation that is not valid given the state of the component instance. |
0x00000309 ERROR_VERSION_PARSE_ERROR |
A version number could not be parsed. |
0x0000030A ERROR_BADSTARTPOSITION |
The iterator's start position is invalid. |
0x0000030B ERROR_MEMORY_HARDWARE |
The hardware has reported an uncorrectable memory error. |
0x0000030C ERROR_DISK_REPAIR_DISABLED |
The attempted operation required self-healing to be enabled. |
0x0000030D ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE |
The Desktop heap encountered an error while allocating session memory. There is more information in the system event log. |
0x0000030E ERROR_SYSTEM_POWERSTATE_TRANSITION |
The system power state is transitioning from %2 to %3. |
0x0000030F ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION |
The system power state is transitioning from %2 to %3 but could enter %4. |
0x00000310 ERROR_MCA_EXCEPTION |
A thread is getting dispatched with MCA EXCEPTION because of MCA. |
0x00000311 ERROR_ACCESS_AUDIT_BY_POLICY |
Access to %1 is monitored by policy rule %2. |
0x00000312 ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY |
Access to %1 has been restricted by your administrator by policy rule %2. |
0x00000313 ERROR_ABANDON_HIBERFILE |
A valid hibernation file has been invalidated and should be abandoned. |
0x00000314 ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED |
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error can be caused by network connectivity issues. Try to save this file elsewhere. |
0x00000315 ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR |
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error was returned by the server on which the file exists. Try to save this file elsewhere. |
0x00000316 ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR |
{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error can be caused if the device has been removed or the media is write-protected. |
0x000003E2 ERROR_EA_ACCESS_DENIED |
Access to the extended attribute was denied. |
0x000003E3 ERROR_OPERATION_ABORTED |
The I/O operation has been aborted because of either a thread exit or an application request. |
0x000003E4 ERROR_IO_INCOMPLETE |
Overlapped I/O event is not in a signaled state. |
0x000003E5 ERROR_IO_PENDING |
Overlapped I/O operation is in progress. |
0x000003E6 ERROR_NOACCESS |
Invalid access to memory location. |
0x000003E7 ERROR_SWAPERROR |
Error performing in-page operation. |
0x000003E9 ERROR_STACK_OVERFLOW |
Recursion too deep; the stack overflowed. |
0x000003EA ERROR_INVALID_MESSAGE |
The window cannot act on the sent message. |
0x000003EB ERROR_CAN_NOT_COMPLETE |
Cannot complete this function. |
0x000003EC ERROR_INVALID_FLAGS |
Invalid flags. |
0x000003ED ERROR_UNRECOGNIZED_VOLUME |
The volume does not contain a recognized file system. Be sure that all required file system drivers are loaded and that the volume is not corrupted. |
0x000003EE ERROR_FILE_INVALID |
The volume for a file has been externally altered so that the opened file is no longer valid. |
0x000003EF ERROR_FULLSCREEN_MODE |
The requested operation cannot be performed in full-screen mode. |
0x000003F0 ERROR_NO_TOKEN |
An attempt was made to reference a token that does not exist. |
0x000003F1 ERROR_BADDB |
The configuration registry database is corrupt. |
0x000003F2 ERROR_BADKEY |
The configuration registry key is invalid. |
0x000003F3 ERROR_CANTOPEN |
The configuration registry key could not be opened. |
0x000003F4 ERROR_CANTREAD |
The configuration registry key could not be read. |
0x000003F5 ERROR_CANTWRITE |
The configuration registry key could not be written. |
0x000003F6 ERROR_REGISTRY_RECOVERED |
One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful. |
0x000003F7 ERROR_REGISTRY_CORRUPT |
The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted. |
0x000003F8 ERROR_REGISTRY_IO_FAILED |
An I/O operation initiated by the registry failed and cannot be recovered. The registry could not read in, write out, or flush one of the files that contain the system's image of the registry. |
0x000003F9 ERROR_NOT_REGISTRY_FILE |
The system attempted to load or restore a file into the registry, but the specified file is not in a registry file format. |
0x000003FA ERROR_KEY_DELETED |
Illegal operation attempted on a registry key that has been marked for deletion. |
0x000003FB ERROR_NO_LOG_SPACE |
System could not allocate the required space in a registry log. |
0x000003FC ERROR_KEY_HAS_CHILDREN |
Cannot create a symbolic link in a registry key that already has subkeys or values. |
0x000003FD ERROR_CHILD_MUST_BE_VOLATILE |
Cannot create a stable subkey under a volatile parent key. |
0x000003FE ERROR_NOTIFY_ENUM_DIR |
A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. |
0x0000041B ERROR_DEPENDENT_SERVICES_RUNNING |
A stop control has been sent to a service that other running services are dependent on. |
0x0000041C ERROR_INVALID_SERVICE_CONTROL |
The requested control is not valid for this service. |
0x0000041D ERROR_SERVICE_REQUEST_TIMEOUT |
The service did not respond to the start or control request in a timely fashion. |
0x0000041E ERROR_SERVICE_NO_THREAD |
A thread could not be created for the service. |
0x0000041F ERROR_SERVICE_DATABASE_LOCKED |
The service database is locked. |
0x00000420 ERROR_SERVICE_ALREADY_RUNNING |
An instance of the service is already running. |
0x00000421 ERROR_INVALID_SERVICE_ACCOUNT |
The account name is invalid or does not exist, or the password is invalid for the account name specified. |
0x00000422 ERROR_SERVICE_DISABLED |
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. |
0x00000423 ERROR_CIRCULAR_DEPENDENCY |
Circular service dependency was specified. |
0x00000424 ERROR_SERVICE_DOES_NOT_EXIST |
The specified service does not exist as an installed service. |
0x00000425 ERROR_SERVICE_CANNOT_ACCEPT_CTRL |
The service cannot accept control messages at this time. |
0x00000426 ERROR_SERVICE_NOT_ACTIVE |
The service has not been started. |
0x00000427 ERROR_FAILED_SERVICE_CONTROLLER_CONNECT |
The service process could not connect to the service controller. |
0x00000428 ERROR_EXCEPTION_IN_SERVICE |
An exception occurred in the service when handling the control request. |
0x00000429 ERROR_DATABASE_DOES_NOT_EXIST |
The database specified does not exist. |
0x0000042A ERROR_SERVICE_SPECIFIC_ERROR |
The service has returned a service-specific error code. |
0x0000042B ERROR_PROCESS_ABORTED |
The process terminated unexpectedly. |
0x0000042C ERROR_SERVICE_DEPENDENCY_FAIL |
The dependency service or group failed to start. |
0x0000042D ERROR_SERVICE_LOGON_FAILED |
The service did not start due to a logon failure. |
0x0000042E ERROR_SERVICE_START_HANG |
After starting, the service stopped responding in a start-pending state. |
0x0000042F ERROR_INVALID_SERVICE_LOCK |
The specified service database lock is invalid. |
0x00000430 ERROR_SERVICE_MARKED_FOR_DELETE |
The specified service has been marked for deletion. |
0x00000431 ERROR_SERVICE_EXISTS |
The specified service already exists. |
0x00000432 ERROR_ALREADY_RUNNING_LKG |
The system is currently running with the last-known-good configuration. |
0x00000433 ERROR_SERVICE_DEPENDENCY_DELETED |
The dependency service does not exist or has been marked for deletion. |
0x00000434 ERROR_BOOT_ALREADY_ACCEPTED |
The current boot has already been accepted for use as the last-known-good control set. |
0x00000435 ERROR_SERVICE_NEVER_STARTED |
No attempts to start the service have been made since the last boot. |
0x00000436 ERROR_DUPLICATE_SERVICE_NAME |
The name is already in use as either a service name or a service display name. |
0x00000437 ERROR_DIFFERENT_SERVICE_ACCOUNT |
The account specified for this service is different from the account specified for other services running in the same process. |
0x00000438 ERROR_CANNOT_DETECT_DRIVER_FAILURE |
Failure actions can only be set for Win32 services, not for drivers. |
0x00000439 ERROR_CANNOT_DETECT_PROCESS_ABORT |
This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly. |
0x0000043A ERROR_NO_RECOVERY_PROGRAM |
No recovery program has been configured for this service. |
0x0000043B ERROR_SERVICE_NOT_IN_EXE |
The executable program that this service is configured to run in does not implement the service. |
0x0000043C ERROR_NOT_SAFEBOOT_SERVICE |
This service cannot be started in Safe Mode. |
0x0000044C ERROR_END_OF_MEDIA |
The physical end of the tape has been reached. |
0x0000044D ERROR_FILEMARK_DETECTED |
A tape access reached a filemark. |
0x0000044E ERROR_BEGINNING_OF_MEDIA |
The beginning of the tape or a partition was encountered. |
0x0000044F ERROR_SETMARK_DETECTED |
A tape access reached the end of a set of files. |
0x00000450 ERROR_NO_DATA_DETECTED |
No more data is on the tape. |
0x00000451 ERROR_PARTITION_FAILURE |
Tape could not be partitioned. |
0x00000452 ERROR_INVALID_BLOCK_LENGTH |
When accessing a new tape of a multivolume partition, the current block size is incorrect. |
0x00000453 ERROR_DEVICE_NOT_PARTITIONED |
Tape partition information could not be found when loading a tape. |
0x00000454 ERROR_UNABLE_TO_LOCK_MEDIA |
Unable to lock the media eject mechanism. |
0x00000455 ERROR_UNABLE_TO_UNLOAD_MEDIA |
Unable to unload the media. |
0x00000456 ERROR_MEDIA_CHANGED |
The media in the drive might have changed. |
0x00000457 ERROR_BUS_RESET |
The I/O bus was reset. |
0x00000458 ERROR_NO_MEDIA_IN_DRIVE |
No media in drive. |
0x00000459 ERROR_NO_UNICODE_TRANSLATION |
No mapping for the Unicode character exists in the target multibyte code page. |
0x0000045A ERROR_DLL_INIT_FAILED |
A DLL initialization routine failed. |
0x0000045B ERROR_SHUTDOWN_IN_PROGRESS |
A system shutdown is in progress. |
0x0000045C ERROR_NO_SHUTDOWN_IN_PROGRESS |
Unable to abort the system shutdown because no shutdown was in progress. |
0x0000045D ERROR_IO_DEVICE |
The request could not be performed because of an I/O device error. |
0x0000045E ERROR_SERIAL_NO_DEVICE |
No serial device was successfully initialized. The serial driver will unload. |
0x0000045F ERROR_IRQ_BUSY |
Unable to open a device that was sharing an IRQ with other devices. At least one other device that uses that IRQ was already opened. |
0x00000460 ERROR_MORE_WRITES |
A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.) |
0x00000461 ERROR_COUNTER_TIMEOUT |
A serial I/O operation completed because the time-out period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) |
0x00000462 ERROR_FLOPPY_ID_MARK_NOT_FOUND |
No ID address mark was found on the floppy disk. |
0x00000463 ERROR_FLOPPY_WRONG_CYLINDER |
Mismatch between the floppy disk sector ID field and the floppy disk controller track address. |
0x00000464 ERROR_FLOPPY_UNKNOWN_ERROR |
The floppy disk controller reported an error that is not recognized by the floppy disk driver. |
0x00000465 ERROR_FLOPPY_BAD_REGISTERS |
The floppy disk controller returned inconsistent results in its registers. |
0x00000466 ERROR_DISK_RECALIBRATE_FAILED |
While accessing the hard disk, a recalibrate operation failed, even after retries. |
0x00000467 ERROR_DISK_OPERATION_FAILED |
While accessing the hard disk, a disk operation failed even after retries. |
0x00000468 ERROR_DISK_RESET_FAILED |
While accessing the hard disk, a disk controller reset was needed, but that also failed. |
0x00000469 ERROR_EOM_OVERFLOW |
Physical end of tape encountered. |
0x0000046A ERROR_NOT_ENOUGH_SERVER_MEMORY |
Not enough server storage is available to process this command. |
0x0000046B ERROR_POSSIBLE_DEADLOCK |
A potential deadlock condition has been detected. |
0x0000046C ERROR_MAPPED_ALIGNMENT |
The base address or the file offset specified does not have the proper alignment. |
0x00000474 ERROR_SET_POWER_STATE_VETOED |
An attempt to change the system power state was vetoed by another application or driver. |
0x00000475 ERROR_SET_POWER_STATE_FAILED |
The system BIOS failed an attempt to change the system power state. |
0x00000476 ERROR_TOO_MANY_LINKS |
An attempt was made to create more links on a file than the file system supports. |
0x0000047E ERROR_OLD_WIN_VERSION |
The specified program requires a newer version of Windows. |
0x0000047F ERROR_APP_WRONG_OS |
The specified program is not a Windows or MS-DOS program. |
0x00000480 ERROR_SINGLE_INSTANCE_APP |
Cannot start more than one instance of the specified program. |
0x00000481 ERROR_RMODE_APP |
The specified program was written for an earlier version of Windows. |
0x00000482 ERROR_INVALID_DLL |
One of the library files needed to run this application is damaged. |
0x00000483 ERROR_NO_ASSOCIATION |
No application is associated with the specified file for this operation. |
0x00000484 ERROR_DDE_FAIL |
An error occurred in sending the command to the application. |
0x00000485 ERROR_DLL_NOT_FOUND |
One of the library files needed to run this application cannot be found. |
0x00000486 ERROR_NO_MORE_USER_HANDLES |
The current process has used all of its system allowance of handles for Windows manager objects. |
0x00000487 ERROR_MESSAGE_SYNC_ONLY |
The message can be used only with synchronous operations. |
0x00000488 ERROR_SOURCE_ELEMENT_EMPTY |
The indicated source element has no media. |
0x00000489 ERROR_DESTINATION_ELEMENT_FULL |
The indicated destination element already contains media. |
0x0000048A ERROR_ILLEGAL_ELEMENT_ADDRESS |
The indicated element does not exist. |
0x0000048B ERROR_MAGAZINE_NOT_PRESENT |
The indicated element is part of a magazine that is not present. |
0x0000048C ERROR_DEVICE_REINITIALIZATION_NEEDED |
The indicated device requires re-initialization due to hardware errors. |
0x0000048D ERROR_DEVICE_REQUIRES_CLEANING |
The device has indicated that cleaning is required before further operations are attempted. |
0x0000048E ERROR_DEVICE_DOOR_OPEN |
The device has indicated that its door is open. |
0x0000048F ERROR_DEVICE_NOT_CONNECTED |
The device is not connected. |
0x00000490 ERROR_NOT_FOUND |
Element not found. |
0x00000491 ERROR_NO_MATCH |
There was no match for the specified key in the index. |
0x00000492 ERROR_SET_NOT_FOUND |
The property set specified does not exist on the object. |
0x00000493 ERROR_POINT_NOT_FOUND |
The point passed to GetMouseMovePoints is not in the buffer. |
0x00000494 ERROR_NO_TRACKING_SERVICE |
The tracking (workstation) service is not running. |
0x00000495 ERROR_NO_VOLUME_ID |
The volume ID could not be found. |
0x00000497 ERROR_UNABLE_TO_REMOVE_REPLACED |
Unable to remove the file to be replaced. |
0x00000498 ERROR_UNABLE_TO_MOVE_REPLACEMENT |
Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name. |
0x00000499 ERROR_UNABLE_TO_MOVE_REPLACEMENT_2 |
Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name. |
0x0000049A ERROR_JOURNAL_DELETE_IN_PROGRESS |
The volume change journal is being deleted. |
0x0000049B ERROR_JOURNAL_NOT_ACTIVE |
The volume change journal is not active. |
0x0000049C ERROR_POTENTIAL_FILE_FOUND |
A file was found, but it might not be the correct file. |
0x0000049D ERROR_JOURNAL_ENTRY_DELETED |
The journal entry has been deleted from the journal. |
0x000004A6 ERROR_SHUTDOWN_IS_SCHEDULED |
A system shutdown has already been scheduled. |
0x000004A7 ERROR_SHUTDOWN_USERS_LOGGED_ON |
The system shutdown cannot be initiated because there are other users logged on to the computer. |
0x000004B0 ERROR_BAD_DEVICE |
The specified device name is invalid. |
0x000004B1 ERROR_CONNECTION_UNAVAIL |
The device is not currently connected but it is a remembered connection. |
0x000004B2 ERROR_DEVICE_ALREADY_REMEMBERED |
The local device name has a remembered connection to another network resource. |
0x000004B3 ERROR_NO_NET_OR_BAD_PATH |
The network path was either typed incorrectly, does not exist, or the network provider is not currently available. Try retyping the path or contact your network administrator. |
0x000004B4 ERROR_BAD_PROVIDER |
The specified network provider name is invalid. |
0x000004B5 ERROR_CANNOT_OPEN_PROFILE |
Unable to open the network connection profile. |
0x000004B6 ERROR_BAD_PROFILE |
The network connection profile is corrupted. |
0x000004B7 ERROR_NOT_CONTAINER |
Cannot enumerate a noncontainer. |
0x000004B8 ERROR_EXTENDED_ERROR |
An extended error has occurred. |
0x000004B9 ERROR_INVALID_GROUPNAME |
The format of the specified group name is invalid. |
0x000004BA ERROR_INVALID_COMPUTERNAME |
The format of the specified computer name is invalid. |
0x000004BB ERROR_INVALID_EVENTNAME |
The format of the specified event name is invalid. |
0x000004BC ERROR_INVALID_DOMAINNAME |
The format of the specified domain name is invalid. |
0x000004BD ERROR_INVALID_SERVICENAME |
The format of the specified service name is invalid. |
0x000004BE ERROR_INVALID_NETNAME |
The format of the specified network name is invalid. |
0x000004BF ERROR_INVALID_SHARENAME |
The format of the specified share name is invalid. |
0x000004C0 ERROR_INVALID_PASSWORDNAME |
The format of the specified password is invalid. |
0x000004C1 ERROR_INVALID_MESSAGENAME |
The format of the specified message name is invalid. |
0x000004C2 ERROR_INVALID_MESSAGEDEST |
The format of the specified message destination is invalid. |
0x000004C3 ERROR_SESSION_CREDENTIAL_CONFLICT |
Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again. |
0x000004C4 ERROR_REMOTE_SESSION_LIMIT_EXCEEDED |
An attempt was made to establish a session to a network server, but there are already too many sessions established to that server. |
0x000004C5 ERROR_DUP_DOMAINNAME |
The workgroup or domain name is already in use by another computer on the network. |
0x000004C6 ERROR_NO_NETWORK |
The network is not present or not started. |
0x000004C7 ERROR_CANCELLED |
The operation was canceled by the user. |
0x000004C8 ERROR_USER_MAPPED_FILE |
The requested operation cannot be performed on a file with a user-mapped section open. |
0x000004C9 ERROR_CONNECTION_REFUSED |
The remote system refused the network connection. |
0x000004CA ERROR_GRACEFUL_DISCONNECT |
The network connection was gracefully closed. |
0x000004CB ERROR_ADDRESS_ALREADY_ASSOCIATED |
The network transport endpoint already has an address associated with it. |
0x000004CC ERROR_ADDRESS_NOT_ASSOCIATED |
An address has not yet been associated with the network endpoint. |
0x000004CD ERROR_CONNECTION_INVALID |
An operation was attempted on a nonexistent network connection. |
0x000004CE ERROR_CONNECTION_ACTIVE |
An invalid operation was attempted on an active network connection. |
0x000004CF ERROR_NETWORK_UNREACHABLE |
The network location cannot be reached. For information about network troubleshooting, see Windows Help. |
0x000004D0 ERROR_HOST_UNREACHABLE |
The network location cannot be reached. For information about network troubleshooting, see Windows Help. |
0x000004D1 ERROR_PROTOCOL_UNREACHABLE |
The network location cannot be reached. For information about network troubleshooting, see Windows Help. |
0x000004D2 ERROR_PORT_UNREACHABLE |
No service is operating at the destination network endpoint on the remote system. |
0x000004D3 ERROR_REQUEST_ABORTED |
The request was aborted. |
0x000004D4 ERROR_CONNECTION_ABORTED |
The network connection was aborted by the local system. |
0x000004D5 ERROR_RETRY |
The operation could not be completed. A retry should be performed. |
0x000004D6 ERROR_CONNECTION_COUNT_LIMIT |
A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached. |
0x000004D7 ERROR_LOGIN_TIME_RESTRICTION |
Attempting to log on during an unauthorized time of day for this account. |
0x000004D8 ERROR_LOGIN_WKSTA_RESTRICTION |
The account is not authorized to log on from this station. |
0x000004D9 ERROR_INCORRECT_ADDRESS |
The network address could not be used for the operation requested. |
0x000004DA ERROR_ALREADY_REGISTERED |
The service is already registered. |
0x000004DB ERROR_SERVICE_NOT_FOUND |
The specified service does not exist. |
0x000004DC ERROR_NOT_AUTHENTICATED |
The operation being requested was not performed because the user has not been authenticated. |
0x000004DD ERROR_NOT_LOGGED_ON |
The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist. |
0x000004DE ERROR_CONTINUE |
Continue with work in progress. |
0x000004DF ERROR_ALREADY_INITIALIZED |
An attempt was made to perform an initialization operation when initialization has already been completed. |
0x000004E0 ERROR_NO_MORE_DEVICES |
No more local devices. |
0x000004E1 ERROR_NO_SUCH_SITE |
The specified site does not exist. |
0x000004E2 ERROR_DOMAIN_CONTROLLER_EXISTS |
A domain controller with the specified name already exists. |
0x000004E3 ERROR_ONLY_IF_CONNECTED |
This operation is supported only when you are connected to the server. |
0x000004E4 ERROR_OVERRIDE_NOCHANGES |
The group policy framework should call the extension even if there are no changes. |
0x000004E5 ERROR_BAD_USER_PROFILE |
The specified user does not have a valid profile. |
0x000004E6 ERROR_NOT_SUPPORTED_ON_SBS |
This operation is not supported on a computer running Windows Server 2003 operating system for Small Business Server. |
0x000004E7 ERROR_SERVER_SHUTDOWN_IN_PROGRESS |
The server machine is shutting down. |
0x000004E8 ERROR_HOST_DOWN |
The remote system is not available. For information about network troubleshooting, see Windows Help. |
0x000004E9 ERROR_NON_ACCOUNT_SID |
The security identifier provided is not from an account domain. |
0x000004EA ERROR_NON_DOMAIN_SID |
The security identifier provided does not have a domain component. |
0x000004EB ERROR_APPHELP_BLOCK |
AppHelp dialog canceled, thus preventing the application from starting. |
0x000004EC ERROR_ACCESS_DISABLED_BY_POLICY |
This program is blocked by Group Policy. For more information, contact your system administrator. |
0x000004ED ERROR_REG_NAT_CONSUMPTION |
A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific. |
0x000004EE ERROR_CSCSHARE_OFFLINE |
The share is currently offline or does not exist. |
0x000004EF ERROR_PKINIT_FAILURE |
The Kerberos protocol encountered an error while validating the KDC certificate during smartcard logon. There is more information in the system event log. |
0x000004F0 ERROR_SMARTCARD_SUBSYSTEM_FAILURE |
The Kerberos protocol encountered an error while attempting to utilize the smartcard subsystem. |
0x000004F1 ERROR_DOWNGRADE_DETECTED |
The system detected a possible attempt to compromise security. Ensure that you can contact the server that authenticated you. |
0x000004F7 ERROR_MACHINE_LOCKED |
The machine is locked and cannot be shut down without the force option. |
0x000004F9 ERROR_CALLBACK_SUPPLIED_INVALID_DATA |
An application-defined callback gave invalid data when called. |
0x000004FA ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED |
The Group Policy framework should call the extension in the synchronous foreground policy refresh. |
0x000004FB ERROR_DRIVER_BLOCKED |
This driver has been blocked from loading. |
0x000004FC ERROR_INVALID_IMPORT_OF_NON_DLL |
A DLL referenced a module that was neither a DLL nor the process's executable image. |
0x000004FD ERROR_ACCESS_DISABLED_WEBBLADE |
Windows cannot open this program because it has been disabled. |
0x000004FE ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER |
Windows cannot open this program because the license enforcement system has been tampered with or become corrupted. |
0x000004FF ERROR_RECOVERY_FAILURE |
A transaction recover failed. |
0x00000500 ERROR_ALREADY_FIBER |
The current thread has already been converted to a fiber. |
0x00000501 ERROR_ALREADY_THREAD |
The current thread has already been converted from a fiber. |
0x00000502 ERROR_STACK_BUFFER_OVERRUN |
The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application. |
0x00000503 ERROR_PARAMETER_QUOTA_EXCEEDED |
Data present in one of the parameters is more than the function can operate on. |
0x00000504 ERROR_DEBUGGER_INACTIVE |
An attempt to perform an operation on a debug object failed because the object is in the process of being deleted. |
0x00000505 ERROR_DELAY_LOAD_FAILED |
An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed. |
0x00000506 ERROR_VDM_DISALLOWED |
%1 is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator. |
0x00000507 ERROR_UNIDENTIFIED_ERROR |
Insufficient information exists to identify the cause of failure. |
0x00000508 ERROR_INVALID_CRUNTIME_PARAMETER |
The parameter passed to a C runtime function is incorrect. |
0x00000509 ERROR_BEYOND_VDL |
The operation occurred beyond the valid data length of the file. |
0x0000050A ERROR_INCOMPATIBLE_SERVICE_SID_TYPE |
The service start failed because one or more services in the same process have an incompatible service SID type setting. A service with a restricted service SID type can only coexist in the same process with other services with a restricted SID type. |
0x0000050B ERROR_DRIVER_PROCESS_TERMINATED |
The process hosting the driver for this device has been terminated. |
0x0000050C ERROR_IMPLEMENTATION_LIMIT |
An operation attempted to exceed an implementation-defined limit. |
0x0000050D ERROR_PROCESS_IS_PROTECTED |
Either the target process, or the target thread's containing process, is a protected process. |
0x0000050E ERROR_SERVICE_NOTIFY_CLIENT_LAGGING |
The service notification client is lagging too far behind the current state of services in the machine. |
0x0000050F ERROR_DISK_QUOTA_EXCEEDED |
An operation failed because the storage quota was exceeded. |
0x00000510 ERROR_CONTENT_BLOCKED |
An operation failed because the content was blocked. |
0x00000511 ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE |
A privilege that the service requires to function properly does not exist in the service account configuration. The Services Microsoft Management Console (MMC) snap-in (Services.msc) and the Local Security Settings MMC snap-in (Secpol.msc) can be used to view the service configuration and the account configuration. |
0x00000513 ERROR_INVALID_LABEL |
Indicates a particular SID cannot be assigned as the label of an object. |
0x00000514 ERROR_NOT_ALL_ASSIGNED |
Not all privileges or groups referenced are assigned to the caller. |
0x00000515 ERROR_SOME_NOT_MAPPED |
Some mapping between account names and SIDs was not done. |
0x00000516 ERROR_NO_QUOTAS_FOR_ACCOUNT |
No system quota limits are specifically set for this account. |
0x00000517 ERROR_LOCAL_USER_SESSION_KEY |
No encryption key is available. A well-known encryption key was returned. |
0x00000518 ERROR_NULL_LM_PASSWORD |
The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a null string. |
0x00000519 ERROR_UNKNOWN_REVISION |
The revision level is unknown. |
0x0000051A ERROR_REVISION_MISMATCH |
Indicates two revision levels are incompatible. |
0x0000051B ERROR_INVALID_OWNER |
This SID cannot be assigned as the owner of this object. |
0x0000051C ERROR_INVALID_PRIMARY_GROUP |
This SID cannot be assigned as the primary group of an object. |
0x0000051D ERROR_NO_IMPERSONATION_TOKEN |
An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. |
0x0000051E ERROR_CANT_DISABLE_MANDATORY |
The group cannot be disabled. |
0x0000051F ERROR_NO_LOGON_SERVERS |
There are currently no logon servers available to service the logon request. |
0x00000520 ERROR_NO_SUCH_LOGON_SESSION |
A specified logon session does not exist. It might already have been terminated. |
0x00000521 ERROR_NO_SUCH_PRIVILEGE |
A specified privilege does not exist. |
0x00000522 ERROR_PRIVILEGE_NOT_HELD |
A required privilege is not held by the client. |
0x00000523 ERROR_INVALID_ACCOUNT_NAME |
The name provided is not a properly formed account name. |
0x00000524 ERROR_USER_EXISTS |
The specified account already exists. |
0x00000525 ERROR_NO_SUCH_USER |
The specified account does not exist. |
0x00000526 ERROR_GROUP_EXISTS |
The specified group already exists. |
0x00000527 ERROR_NO_SUCH_GROUP |
The specified group does not exist. |
0x00000528 ERROR_MEMBER_IN_GROUP |
Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. |
0x00000529 ERROR_MEMBER_NOT_IN_GROUP |
The specified user account is not a member of the specified group account. |
0x0000052A ERROR_LAST_ADMIN |
The last remaining administration account cannot be disabled or deleted. |
0x0000052B ERROR_WRONG_PASSWORD |
Unable to update the password. The value provided as the current password is incorrect. |
0x0000052C ERROR_ILL_FORMED_PASSWORD |
Unable to update the password. The value provided for the new password contains values that are not allowed in passwords. |
0x0000052D ERROR_PASSWORD_RESTRICTION |
Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirements of the domain. |
0x0000052E ERROR_LOGON_FAILURE |
Logon failure: Unknown user name or bad password. |
0x0000052F ERROR_ACCOUNT_RESTRICTION |
Logon failure: User account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced. |
0x00000530 ERROR_INVALID_LOGON_HOURS |
Logon failure: Account logon time restriction violation. |
0x00000531 ERROR_INVALID_WORKSTATION |
Logon failure: User not allowed to log on to this computer. |
0x00000532 ERROR_PASSWORD_EXPIRED |
Logon failure: The specified account password has expired. |
0x00000533 ERROR_ACCOUNT_DISABLED |
Logon failure: Account currently disabled. |
0x00000534 ERROR_NONE_MAPPED |
No mapping between account names and SIDs was done. |
0x00000535 ERROR_TOO_MANY_LUIDS_REQUESTED |
Too many local user identifiers (LUIDs) were requested at one time. |
0x00000536 ERROR_LUIDS_EXHAUSTED |
No more LUIDs are available. |
0x00000537 ERROR_INVALID_SUB_AUTHORITY |
The sub-authority part of an SID is invalid for this particular use. |
0x00000538 ERROR_INVALID_ACL |
The ACL structure is invalid. |
0x00000539 ERROR_INVALID_SID |
The SID structure is invalid. |
0x0000053A ERROR_INVALID_SECURITY_DESCR |
The security descriptor structure is invalid. |
0x0000053C ERROR_BAD_INHERITANCE_ACL |
The inherited ACL or ACE could not be built. |
0x0000053D ERROR_SERVER_DISABLED |
The server is currently disabled. |
0x0000053E ERROR_SERVER_NOT_DISABLED |
The server is currently enabled. |
0x0000053F ERROR_INVALID_ID_AUTHORITY |
The value provided was an invalid value for an identifier authority. |
0x00000540 ERROR_ALLOTTED_SPACE_EXCEEDED |
No more memory is available for security information updates. |
0x00000541 ERROR_INVALID_GROUP_ATTRIBUTES |
The specified attributes are invalid, or incompatible with the attributes for the group as a whole. |
0x00000542 ERROR_BAD_IMPERSONATION_LEVEL |
Either a required impersonation level was not provided, or the provided impersonation level is invalid. |
0x00000543 ERROR_CANT_OPEN_ANONYMOUS |
Cannot open an anonymous level security token. |
0x00000544 ERROR_BAD_VALIDATION_CLASS |
The validation information class requested was invalid. |
0x00000545 ERROR_BAD_TOKEN_TYPE |
The type of the token is inappropriate for its attempted use. |
0x00000546 ERROR_NO_SECURITY_ON_OBJECT |
Unable to perform a security operation on an object that has no associated security. |
0x00000547 ERROR_CANT_ACCESS_DOMAIN_INFO |
Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied. |
0x00000548 ERROR_INVALID_SERVER_STATE |
The SAM or local security authority (LSA) server was in the wrong state to perform the security operation. |
0x00000549 ERROR_INVALID_DOMAIN_STATE |
The domain was in the wrong state to perform the security operation. |
0x0000054A ERROR_INVALID_DOMAIN_ROLE |
This operation is only allowed for the PDC of the domain. |
0x0000054B ERROR_NO_SUCH_DOMAIN |
The specified domain either does not exist or could not be contacted. |
0x0000054C ERROR_DOMAIN_EXISTS |
The specified domain already exists. |
0x0000054D ERROR_DOMAIN_LIMIT_EXCEEDED |
An attempt was made to exceed the limit on the number of domains per server. |
0x0000054E ERROR_INTERNAL_DB_CORRUPTION |
Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk. |
0x0000054F ERROR_INTERNAL_ERROR |
An internal error occurred. |
0x00000550 ERROR_GENERIC_NOT_MAPPED |
Generic access types were contained in an access mask that should already be mapped to nongeneric types. |
0x00000551 ERROR_BAD_DESCRIPTOR_FORMAT |
A security descriptor is not in the right format (absolute or self-relative). |
0x00000552 ERROR_NOT_LOGON_PROCESS |
The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. |
0x00000553 ERROR_LOGON_SESSION_EXISTS |
Cannot start a new logon session with an ID that is already in use. |
0x00000554 ERROR_NO_SUCH_PACKAGE |
A specified authentication package is unknown. |
0x00000555 ERROR_BAD_LOGON_SESSION_STATE |
The logon session is not in a state that is consistent with the requested operation. |
0x00000556 ERROR_LOGON_SESSION_COLLISION |
The logon session ID is already in use. |
0x00000557 ERROR_INVALID_LOGON_TYPE |
A logon request contained an invalid logon type value. |
0x00000558 ERROR_CANNOT_IMPERSONATE |
Unable to impersonate using a named pipe until data has been read from that pipe. |
0x00000559 ERROR_RXACT_INVALID_STATE |
The transaction state of a registry subtree is incompatible with the requested operation. |
0x0000055A ERROR_RXACT_COMMIT_FAILURE |
An internal security database corruption has been encountered. |
0x0000055B ERROR_SPECIAL_ACCOUNT |
Cannot perform this operation on built-in accounts. |
0x0000055C ERROR_SPECIAL_GROUP |
Cannot perform this operation on this built-in special group. |
0x0000055D ERROR_SPECIAL_USER |
Cannot perform this operation on this built-in special user. |
0x0000055E ERROR_MEMBERS_PRIMARY_GROUP |
The user cannot be removed from a group because the group is currently the user's primary group. |
0x0000055F ERROR_TOKEN_ALREADY_IN_USE |
The token is already in use as a primary token. |
0x00000560 ERROR_NO_SUCH_ALIAS |
The specified local group does not exist. |
0x00000561 ERROR_MEMBER_NOT_IN_ALIAS |
The specified account name is not a member of the group. |
0x00000562 ERROR_MEMBER_IN_ALIAS |
The specified account name is already a member of the group. |
0x00000563 ERROR_ALIAS_EXISTS |
The specified local group already exists. |
0x00000564 ERROR_LOGON_NOT_GRANTED |
Logon failure: The user has not been granted the requested logon type at this computer. |
0x00000565 ERROR_TOO_MANY_SECRETS |
The maximum number of secrets that can be stored in a single system has been exceeded. |
0x00000566 ERROR_SECRET_TOO_LONG |
The length of a secret exceeds the maximum length allowed. |
0x00000567 ERROR_INTERNAL_DB_ERROR |
The local security authority database contains an internal inconsistency. |
0x00000568 ERROR_TOO_MANY_CONTEXT_IDS |
During a logon attempt, the user's security context accumulated too many SIDs. |
0x00000569 ERROR_LOGON_TYPE_NOT_GRANTED |
Logon failure: The user has not been granted the requested logon type at this computer. |
0x0000056A ERROR_NT_CROSS_ENCRYPTION_REQUIRED |
A cross-encrypted password is necessary to change a user password. |
0x0000056B ERROR_NO_SUCH_MEMBER |
A member could not be added to or removed from the local group because the member does not exist. |
0x0000056C ERROR_INVALID_MEMBER |
A new member could not be added to a local group because the member has the wrong account type. |
0x0000056D ERROR_TOO_MANY_SIDS |
Too many SIDs have been specified. |
0x0000056E ERROR_LM_CROSS_ENCRYPTION_REQUIRED |
A cross-encrypted password is necessary to change this user password. |
0x0000056F ERROR_NO_INHERITANCE |
Indicates an ACL contains no inheritable components. |
0x00000570 ERROR_FILE_CORRUPT |
The file or directory is corrupted and unreadable. |
0x00000571 ERROR_DISK_CORRUPT |
The disk structure is corrupted and unreadable. |
0x00000572 ERROR_NO_USER_SESSION_KEY |
There is no user session key for the specified logon session. |
0x00000573 ERROR_LICENSE_QUOTA_EXCEEDED |
The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because the service has accepted the maximum number of connections. |
0x00000574 ERROR_WRONG_TARGET_NAME |
Logon failure: The target account name is incorrect. |
0x00000575 ERROR_MUTUAL_AUTH_FAILED |
Mutual authentication failed. The server's password is out of date at the domain controller. |
0x00000576 ERROR_TIME_SKEW |
There is a time and/or date difference between the client and server. |
0x00000577 ERROR_CURRENT_DOMAIN_NOT_ALLOWED |
This operation cannot be performed on the current domain. |
0x00000578 ERROR_INVALID_WINDOW_HANDLE |
Invalid window handle. |
0x00000579 ERROR_INVALID_MENU_HANDLE |
Invalid menu handle. |
0x0000057A ERROR_INVALID_CURSOR_HANDLE |
Invalid cursor handle. |
0x0000057B ERROR_INVALID_ACCEL_HANDLE |
Invalid accelerator table handle. |
0x0000057C ERROR_INVALID_HOOK_HANDLE |
Invalid hook handle. |
0x0000057D ERROR_INVALID_DWP_HANDLE |
Invalid handle to a multiple-window position structure. |
0x0000057E ERROR_TLW_WITH_WSCHILD |
Cannot create a top-level child window. |
0x0000057F ERROR_CANNOT_FIND_WND_CLASS |
Cannot find window class. |
0x00000580 ERROR_WINDOW_OF_OTHER_THREAD |
Invalid window; it belongs to other thread. |
0x00000581 ERROR_HOTKEY_ALREADY_REGISTERED |
Hot key is already registered. |
0x00000582 ERROR_CLASS_ALREADY_EXISTS |
Class already exists. |
0x00000583 ERROR_CLASS_DOES_NOT_EXIST |
Class does not exist. |
0x00000584 ERROR_CLASS_HAS_WINDOWS |
Class still has open windows. |
0x00000585 ERROR_INVALID_INDEX |
Invalid index. |
0x00000586 ERROR_INVALID_ICON_HANDLE |
Invalid icon handle. |
0x00000587 ERROR_PRIVATE_DIALOG_INDEX |
Using private DIALOG window words. |
0x00000588 ERROR_LISTBOX_ID_NOT_FOUND |
The list box identifier was not found. |
0x00000589 ERROR_NO_WILDCARD_CHARACTERS |
No wildcards were found. |
0x0000058A ERROR_CLIPBOARD_NOT_OPEN |
Thread does not have a clipboard open. |
0x0000058B ERROR_HOTKEY_NOT_REGISTERED |
Hot key is not registered. |
0x0000058C ERROR_WINDOW_NOT_DIALOG |
The window is not a valid dialog window. |
0x0000058D ERROR_CONTROL_ID_NOT_FOUND |
Control ID not found. |
0x0000058E ERROR_INVALID_COMBOBOX_MESSAGE |
Invalid message for a combo box because it does not have an edit control. |
0x0000058F ERROR_WINDOW_NOT_COMBOBOX |
The window is not a combo box. |
0x00000590 ERROR_INVALID_EDIT_HEIGHT |
Height must be less than 256. |
0x00000591 ERROR_DC_NOT_FOUND |
Invalid device context (DC) handle. |
0x00000592 ERROR_INVALID_HOOK_FILTER |
Invalid hook procedure type. |
0x00000593 ERROR_INVALID_FILTER_PROC |
Invalid hook procedure. |
0x00000594 ERROR_HOOK_NEEDS_HMOD |
Cannot set nonlocal hook without a module handle. |
0x00000595 ERROR_GLOBAL_ONLY_HOOK |
This hook procedure can only be set globally. |
0x00000596 ERROR_JOURNAL_HOOK_SET |
The journal hook procedure is already installed. |
0x00000597 ERROR_HOOK_NOT_INSTALLED |
The hook procedure is not installed. |
0x00000598 ERROR_INVALID_LB_MESSAGE |
Invalid message for single-selection list box. |
0x00000599 ERROR_SETCOUNT_ON_BAD_LB |
LB_SETCOUNT sent to non-lazy list box. |
0x0000059A ERROR_LB_WITHOUT_TABSTOPS |
This list box does not support tab stops. |
0x0000059B ERROR_DESTROY_OBJECT_OF_OTHER_THREAD |
Cannot destroy object created by another thread. |
0x0000059C ERROR_CHILD_WINDOW_MENU |
Child windows cannot have menus. |
0x0000059D ERROR_NO_SYSTEM_MENU |
The window does not have a system menu. |
0x0000059E ERROR_INVALID_MSGBOX_STYLE |
Invalid message box style. |
0x0000059F ERROR_INVALID_SPI_VALUE |
Invalid system-wide (SPI_*) parameter. |
0x000005A0 ERROR_SCREEN_ALREADY_LOCKED |
Screen already locked. |
0x000005A1 ERROR_HWNDS_HAVE_DIFF_PARENT |
All handles to windows in a multiple-window position structure must have the same parent. |
0x000005A2 ERROR_NOT_CHILD_WINDOW |
The window is not a child window. |
0x000005A3 ERROR_INVALID_GW_COMMAND |
Invalid GW_* command. |
0x000005A4 ERROR_INVALID_THREAD_ID |
Invalid thread identifier. |
0x000005A5 ERROR_NON_MDICHILD_WINDOW |
Cannot process a message from a window that is not a multiple document interface (MDI) window. |
0x000005A6 ERROR_POPUP_ALREADY_ACTIVE |
Pop-up menu already active. |
0x000005A7 ERROR_NO_SCROLLBARS |
The window does not have scroll bars. |
0x000005A8 ERROR_INVALID_SCROLLBAR_RANGE |
Scroll bar range cannot be greater than MAXLONG. |
0x000005A9 ERROR_INVALID_SHOWWIN_COMMAND |
Cannot show or remove the window in the way specified. |
0x000005AA ERROR_NO_SYSTEM_RESOURCES |
Insufficient system resources exist to complete the requested service. |
0x000005AB ERROR_NONPAGED_SYSTEM_RESOURCES |
Insufficient system resources exist to complete the requested service. |
0x000005AC ERROR_PAGED_SYSTEM_RESOURCES |
Insufficient system resources exist to complete the requested service. |
0x000005AD ERROR_WORKING_SET_QUOTA |
Insufficient quota to complete the requested service. |
0x000005AE ERROR_PAGEFILE_QUOTA |
Insufficient quota to complete the requested service. |
0x000005AF ERROR_COMMITMENT_LIMIT |
The paging file is too small for this operation to complete. |
0x000005B0 ERROR_MENU_ITEM_NOT_FOUND |
A menu item was not found. |
0x000005B1 ERROR_INVALID_KEYBOARD_HANDLE |
Invalid keyboard layout handle. |
0x000005B2 ERROR_HOOK_TYPE_NOT_ALLOWED |
Hook type not allowed. |
0x000005B3 ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION |
This operation requires an interactive window station. |
0x000005B4 ERROR_TIMEOUT |
This operation returned because the time-out period expired. |
0x000005B5 ERROR_INVALID_MONITOR_HANDLE |
Invalid monitor handle. |
0x000005B6 ERROR_INCORRECT_SIZE |
Incorrect size argument. |
0x000005B7 ERROR_SYMLINK_CLASS_DISABLED |
The symbolic link cannot be followed because its type is disabled. |
0x000005B8 ERROR_SYMLINK_NOT_SUPPORTED |
This application does not support the current operation on symbolic links. |
0x000005DC ERROR_EVENTLOG_FILE_CORRUPT |
The event log file is corrupted. |
0x000005DD ERROR_EVENTLOG_CANT_START |
No event log file could be opened, so the event logging service did not start. |
0x000005DE ERROR_LOG_FILE_FULL |
The event log file is full. |
0x000005DF ERROR_EVENTLOG_FILE_CHANGED |
The event log file has changed between read operations. |
0x0000060E ERROR_INVALID_TASK_NAME |
The specified task name is invalid. |
0x0000060F ERROR_INVALID_TASK_INDEX |
The specified task index is invalid. |
0x00000610 ERROR_THREAD_ALREADY_IN_TASK |
The specified thread is already joining a task. |
0x00000641 ERROR_INSTALL_SERVICE_FAILURE |
The Windows Installer service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. |
0x00000642 ERROR_INSTALL_USEREXIT |
User canceled installation. |
0x00000643 ERROR_INSTALL_FAILURE |
Fatal error during installation. |
0x00000644 ERROR_INSTALL_SUSPEND |
Installation suspended, incomplete. |
0x00000645 ERROR_UNKNOWN_PRODUCT |
This action is valid only for products that are currently installed. |
0x00000646 ERROR_UNKNOWN_FEATURE |
Feature ID not registered. |
0x00000647 ERROR_UNKNOWN_COMPONENT |
Component ID not registered. |
0x00000648 ERROR_UNKNOWN_PROPERTY |
Unknown property. |
0x00000649 ERROR_INVALID_HANDLE_STATE |
Handle is in an invalid state. |
0x0000064A ERROR_BAD_CONFIGURATION |
The configuration data for this product is corrupt. Contact your support personnel. |
0x0000064B ERROR_INDEX_ABSENT |
Component qualifier not present. |
0x0000064C ERROR_INSTALL_SOURCE_ABSENT |
The installation source for this product is not available. Verify that the source exists and that you can access it. |
0x0000064D ERROR_INSTALL_PACKAGE_VERSION |
This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. |
0x0000064E ERROR_PRODUCT_UNINSTALLED |
Product is uninstalled. |
0x0000064F ERROR_BAD_QUERY_SYNTAX |
SQL query syntax invalid or unsupported. |
0x00000650 ERROR_INVALID_FIELD |
Record field does not exist. |
0x00000651 ERROR_DEVICE_REMOVED |
The device has been removed. |
0x00000652 ERROR_INSTALL_ALREADY_RUNNING |
Another installation is already in progress. Complete that installation before proceeding with this install. |
0x00000653 ERROR_INSTALL_PACKAGE_OPEN_FAILED |
This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package. |
0x00000654 ERROR_INSTALL_PACKAGE_INVALID |
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package. |
0x00000655 ERROR_INSTALL_UI_FAILURE |
There was an error starting the Windows Installer service user interface. Contact your support personnel. |
0x00000656 ERROR_INSTALL_LOG_FAILURE |
Error opening installation log file. Verify that the specified log file location exists and that you can write to it. |
0x00000657 ERROR_INSTALL_LANGUAGE_UNSUPPORTED |
The language of this installation package is not supported by your system. |
0x00000658 ERROR_INSTALL_TRANSFORM_FAILURE |
Error applying transforms. Verify that the specified transform paths are valid. |
0x00000659 ERROR_INSTALL_PACKAGE_REJECTED |
This installation is forbidden by system policy. Contact your system administrator. |
0x0000065A ERROR_FUNCTION_NOT_CALLED |
Function could not be executed. |
0x0000065B ERROR_FUNCTION_FAILED |
Function failed during execution. |
0x0000065C ERROR_INVALID_TABLE |
Invalid or unknown table specified. |
0x0000065D ERROR_DATATYPE_MISMATCH |
Data supplied is of wrong type. |
0x0000065E ERROR_UNSUPPORTED_TYPE |
Data of this type is not supported. |
0x0000065F ERROR_CREATE_FAILED |
The Windows Installer service failed to start. Contact your support personnel. |
0x00000660 ERROR_INSTALL_TEMP_UNWRITABLE |
The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder. |
0x00000661 ERROR_INSTALL_PLATFORM_UNSUPPORTED |
This installation package is not supported by this processor type. Contact your product vendor. |
0x00000662 ERROR_INSTALL_NOTUSED |
Component not used on this computer. |
0x00000663 ERROR_PATCH_PACKAGE_OPEN_FAILED |
This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. |
0x00000664 ERROR_PATCH_PACKAGE_INVALID |
This update package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer update package. |
0x00000665 ERROR_PATCH_PACKAGE_UNSUPPORTED |
This update package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. |
0x00000666 ERROR_PRODUCT_VERSION |
Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs in Control Panel. |
0x00000667 ERROR_INVALID_COMMAND_LINE |
Invalid command-line argument. Consult the Windows Installer SDK for detailed command line help. |
0x00000668 ERROR_INSTALL_REMOTE_DISALLOWED |
Only administrators have permission to add, remove, or configure server software during a Terminal Services remote session. If you want to install or configure software on the server, contact your network administrator. |
0x00000669 ERROR_SUCCESS_REBOOT_INITIATED |
The requested operation completed successfully. The system will be restarted so the changes can take effect. |
0x0000066A ERROR_PATCH_TARGET_NOT_FOUND |
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded might be missing, or the upgrade might update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade. |
0x0000066B ERROR_PATCH_PACKAGE_REJECTED |
The update package is not permitted by a software restriction policy. |
0x0000066C ERROR_INSTALL_TRANSFORM_REJECTED |
One or more customizations are not permitted by a software restriction policy. |
0x0000066D ERROR_INSTALL_REMOTE_PROHIBITED |
The Windows Installer does not permit installation from a Remote Desktop Connection. |
0x0000066E ERROR_PATCH_REMOVAL_UNSUPPORTED |
Uninstallation of the update package is not supported. |
0x0000066F ERROR_UNKNOWN_PATCH |
The update is not applied to this product. |
0x00000670 ERROR_PATCH_NO_SEQUENCE |
No valid sequence could be found for the set of updates. |
0x00000671 ERROR_PATCH_REMOVAL_DISALLOWED |
Update removal was disallowed by policy. |
0x00000672 ERROR_INVALID_PATCH_XML |
The XML update data is invalid. |
0x00000673 ERROR_PATCH_MANAGED_ADVERTISED_PRODUCT |
Windows Installer does not permit updating of managed advertised products. At least one feature of the product must be installed before applying the update. |
0x00000674 ERROR_INSTALL_SERVICE_SAFEBOOT |
The Windows Installer service is not accessible in Safe Mode. Try again when your computer is not in Safe Mode or you can use System Restore to return your machine to a previous good state. |
0x000006A4 RPC_S_INVALID_STRING_BINDING |
The string binding is invalid. |
0x000006A5 RPC_S_WRONG_KIND_OF_BINDING |
The binding handle is not the correct type. |
0x000006A6 RPC_S_INVALID_BINDING |
The binding handle is invalid. |
0x000006A7 RPC_S_PROTSEQ_NOT_SUPPORTED |
The RPC protocol sequence is not supported. |
0x000006A8 RPC_S_INVALID_RPC_PROTSEQ |
The RPC protocol sequence is invalid. |
0x000006A9 RPC_S_INVALID_STRING_UUID |
The string UUID is invalid. |
0x000006AA RPC_S_INVALID_ENDPOINT_FORMAT |
The endpoint format is invalid. |
0x000006AB RPC_S_INVALID_NET_ADDR |
The network address is invalid. |
0x000006AC RPC_S_NO_ENDPOINT_FOUND |
No endpoint was found. |
0x000006AD RPC_S_INVALID_TIMEOUT |
The time-out value is invalid. |
0x000006AE RPC_S_OBJECT_NOT_FOUND |
The object UUID) was not found. |
0x000006AF RPC_S_ALREADY_REGISTERED |
The object UUID) has already been registered. |
0x000006B0 RPC_S_TYPE_ALREADY_REGISTERED |
The type UUID has already been registered. |
0x000006B1 RPC_S_ALREADY_LISTENING |
The RPC server is already listening. |
0x000006B2 RPC_S_NO_PROTSEQS_REGISTERED |
No protocol sequences have been registered. |
0x000006B3 RPC_S_NOT_LISTENING |
The RPC server is not listening. |
0x000006B4 RPC_S_UNKNOWN_MGR_TYPE |
The manager type is unknown. |
0x000006B5 RPC_S_UNKNOWN_IF |
The interface is unknown. |
0x000006B6 RPC_S_NO_BINDINGS |
There are no bindings. |
0x000006B7 RPC_S_NO_PROTSEQS |
There are no protocol sequences. |
0x000006B8 RPC_S_CANT_CREATE_ENDPOINT |
The endpoint cannot be created. |
0x000006B9 RPC_S_OUT_OF_RESOURCES |
Not enough resources are available to complete this operation. |
0x000006BA RPC_S_SERVER_UNAVAILABLE |
The RPC server is unavailable. |
0x000006BB RPC_S_SERVER_TOO_BUSY |
The RPC server is too busy to complete this operation. |
0x000006BC RPC_S_INVALID_NETWORK_OPTIONS |
The network options are invalid. |
0x000006BD RPC_S_NO_CALL_ACTIVE |
There are no RPCs active on this thread. |
0x000006BE RPC_S_CALL_FAILED |
The RPC failed. |
0x000006BF RPC_S_CALL_FAILED_DNE |
The RPC failed and did not execute. |
0x000006C0 RPC_S_PROTOCOL_ERROR |
An RPC protocol error occurred. |
0x000006C1 RPC_S_PROXY_ACCESS_DENIED |
Access to the HTTP proxy is denied. |
0x000006C2 RPC_S_UNSUPPORTED_TRANS_SYN |
The transfer syntax is not supported by the RPC server. |
0x000006C4 RPC_S_UNSUPPORTED_TYPE |
The UUID type is not supported. |
0x000006C5 RPC_S_INVALID_TAG |
The tag is invalid. |
0x000006C6 RPC_S_INVALID_BOUND |
The array bounds are invalid. |
0x000006C7 RPC_S_NO_ENTRY_NAME |
The binding does not contain an entry name. |
0x000006C8 RPC_S_INVALID_NAME_SYNTAX |
The name syntax is invalid. |
0x000006C9 RPC_S_UNSUPPORTED_NAME_SYNTAX |
The name syntax is not supported. |
0x000006CB RPC_S_UUID_NO_ADDRESS |
No network address is available to use to construct a UUID. |
0x000006CC RPC_S_DUPLICATE_ENDPOINT |
The endpoint is a duplicate. |
0x000006CD RPC_S_UNKNOWN_AUTHN_TYPE |
The authentication type is unknown. |
0x000006CE RPC_S_MAX_CALLS_TOO_SMALL |
The maximum number of calls is too small. |
0x000006CF RPC_S_STRING_TOO_LONG |
The string is too long. |
0x000006D0 RPC_S_PROTSEQ_NOT_FOUND |
The RPC protocol sequence was not found. |
0x000006D1 RPC_S_PROCNUM_OUT_OF_RANGE |
The procedure number is out of range. |
0x000006D2 RPC_S_BINDING_HAS_NO_AUTH |
The binding does not contain any authentication information. |
0x000006D3 RPC_S_UNKNOWN_AUTHN_SERVICE |
The authentication service is unknown. |
0x000006D4 RPC_S_UNKNOWN_AUTHN_LEVEL |
The authentication level is unknown. |
0x000006D5 RPC_S_INVALID_AUTH_IDENTITY |
The security context is invalid. |
0x000006D6 RPC_S_UNKNOWN_AUTHZ_SERVICE |
The authorization service is unknown. |
0x000006D7 EPT_S_INVALID_ENTRY |
The entry is invalid. |
0x000006D8 EPT_S_CANT_PERFORM_OP |
The server endpoint cannot perform the operation. |
0x000006D9 EPT_S_NOT_REGISTERED |
There are no more endpoints available from the endpoint mapper. |
0x000006DA RPC_S_NOTHING_TO_EXPORT |
No interfaces have been exported. |
0x000006DB RPC_S_INCOMPLETE_NAME |
The entry name is incomplete. |
0x000006DC RPC_S_INVALID_VERS_OPTION |
The version option is invalid. |
0x000006DD RPC_S_NO_MORE_MEMBERS |
There are no more members. |
0x000006DE RPC_S_NOT_ALL_OBJS_UNEXPORTED |
There is nothing to unexport. |
0x000006DF RPC_S_INTERFACE_NOT_FOUND |
The interface was not found. |
0x000006E0 RPC_S_ENTRY_ALREADY_EXISTS |
The entry already exists. |
0x000006E1 RPC_S_ENTRY_NOT_FOUND |
The entry is not found. |
0x000006E2 RPC_S_NAME_SERVICE_UNAVAILABLE |
The name service is unavailable. |
0x000006E3 RPC_S_INVALID_NAF_ID |
The network address family is invalid. |
0x000006E4 RPC_S_CANNOT_SUPPORT |
The requested operation is not supported. |
0x000006E5 RPC_S_NO_CONTEXT_AVAILABLE |
No security context is available to allow impersonation. |
0x000006E6 RPC_S_INTERNAL_ERROR |
An internal error occurred in an RPC. |
0x000006E7 RPC_S_ZERO_DIVIDE |
The RPC server attempted an integer division by zero. |
0x000006E8 RPC_S_ADDRESS_ERROR |
An addressing error occurred in the RPC server. |
0x000006E9 RPC_S_FP_DIV_ZERO |
A floating-point operation at the RPC server caused a division by zero. |
0x000006EA RPC_S_FP_UNDERFLOW |
A floating-point underflow occurred at the RPC server. |
0x000006EB RPC_S_FP_OVERFLOW |
A floating-point overflow occurred at the RPC server. |
0x000006EC RPC_X_NO_MORE_ENTRIES |
The list of RPC servers available for the binding of auto handles has been exhausted. |
0x000006ED RPC_X_SS_CHAR_TRANS_OPEN_FAIL |
Unable to open the character translation table file. |
0x000006EE RPC_X_SS_CHAR_TRANS_SHORT_FILE |
The file containing the character translation table has fewer than 512 bytes. |
0x000006EF RPC_X_SS_IN_NULL_CONTEXT |
A null context handle was passed from the client to the host during an RPC. |
0x000006F1 RPC_X_SS_CONTEXT_DAMAGED |
The context handle changed during an RPC. |
0x000006F2 RPC_X_SS_HANDLES_MISMATCH |
The binding handles passed to an RPC do not match. |
0x000006F3 RPC_X_SS_CANNOT_GET_CALL_HANDLE |
The stub is unable to get the RPC handle. |
0x000006F4 RPC_X_NULL_REF_POINTER |
A null reference pointer was passed to the stub. |
0x000006F5 RPC_X_ENUM_VALUE_OUT_OF_RANGE |
The enumeration value is out of range. |
0x000006F6 RPC_X_BYTE_COUNT_TOO_SMALL |
The byte count is too small. |
0x000006F7 RPC_X_BAD_STUB_DATA |
The stub received bad data. |
0x000006F8 ERROR_INVALID_USER_BUFFER |
The supplied user buffer is not valid for the requested operation. |
0x000006F9 ERROR_UNRECOGNIZED_MEDIA |
The disk media is not recognized. It might not be formatted. |
0x000006FA ERROR_NO_TRUST_LSA_SECRET |
The workstation does not have a trust secret. |
0x000006FB ERROR_NO_TRUST_SAM_ACCOUNT |
The security database on the server does not have a computer account for this workstation trust relationship. |
0x000006FC ERROR_TRUSTED_DOMAIN_FAILURE |
The trust relationship between the primary domain and the trusted domain failed. |
0x000006FD ERROR_TRUSTED_RELATIONSHIP_FAILURE |
The trust relationship between this workstation and the primary domain failed. |
0x000006FE ERROR_TRUST_FAILURE |
The network logon failed. |
0x000006FF RPC_S_CALL_IN_PROGRESS |
An RPC is already in progress for this thread. |
0x00000700 ERROR_NETLOGON_NOT_STARTED |
An attempt was made to log on, but the network logon service was not started. |
0x00000701 ERROR_ACCOUNT_EXPIRED |
The user's account has expired. |
0x00000702 ERROR_REDIRECTOR_HAS_OPEN_HANDLES |
The redirector is in use and cannot be unloaded. |
0x00000703 ERROR_PRINTER_DRIVER_ALREADY_INSTALLED |
The specified printer driver is already installed. |
0x00000704 ERROR_UNKNOWN_PORT |
The specified port is unknown. |
0x00000705 ERROR_UNKNOWN_PRINTER_DRIVER |
The printer driver is unknown. |
0x00000706 ERROR_UNKNOWN_PRINTPROCESSOR |
The print processor is unknown. |
0x00000707 ERROR_INVALID_SEPARATOR_FILE |
The specified separator file is invalid. |
0x00000708 ERROR_INVALID_PRIORITY |
The specified priority is invalid. |
0x00000709 ERROR_INVALID_PRINTER_NAME |
The printer name is invalid. |
0x0000070A ERROR_PRINTER_ALREADY_EXISTS |
The printer already exists. |
0x0000070B ERROR_INVALID_PRINTER_COMMAND |
The printer command is invalid. |
0x0000070C ERROR_INVALID_DATATYPE |
The specified data type is invalid. |
0x0000070D ERROR_INVALID_ENVIRONMENT |
The environment specified is invalid. |
0x0000070E RPC_S_NO_MORE_BINDINGS |
There are no more bindings. |
0x0000070F ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT |
The account used is an interdomain trust account. Use your global user account or local user account to access this server. |
0x00000710 ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT |
The account used is a computer account. Use your global user account or local user account to access this server. |
0x00000711 ERROR_NOLOGON_SERVER_TRUST_ACCOUNT |
The account used is a server trust account. Use your global user account or local user account to access this server. |
0x00000712 ERROR_DOMAIN_TRUST_INCONSISTENT |
The name or SID of the domain specified is inconsistent with the trust information for that domain. |
0x00000713 ERROR_SERVER_HAS_OPEN_HANDLES |
The server is in use and cannot be unloaded. |
0x00000714 ERROR_RESOURCE_DATA_NOT_FOUND |
The specified image file did not contain a resource section. |
0x00000715 ERROR_RESOURCE_TYPE_NOT_FOUND |
The specified resource type cannot be found in the image file. |
0x00000716 ERROR_RESOURCE_NAME_NOT_FOUND |
The specified resource name cannot be found in the image file. |
0x00000717 ERROR_RESOURCE_LANG_NOT_FOUND |
The specified resource language ID cannot be found in the image file. |
0x00000718 ERROR_NOT_ENOUGH_QUOTA |
Not enough quota is available to process this command. |
0x00000719 RPC_S_NO_INTERFACES |
No interfaces have been registered. |
0x0000071A RPC_S_CALL_CANCELLED |
The RPC was canceled. |
0x0000071B RPC_S_BINDING_INCOMPLETE |
The binding handle does not contain all the required information. |
0x0000071C RPC_S_COMM_FAILURE |
A communications failure occurred during an RPC. |
0x0000071D RPC_S_UNSUPPORTED_AUTHN_LEVEL |
The requested authentication level is not supported. |
0x0000071E RPC_S_NO_PRINC_NAME |
No principal name is registered. |
0x0000071F RPC_S_NOT_RPC_ERROR |
The error specified is not a valid Windows RPC error code. |
0x00000720 RPC_S_UUID_LOCAL_ONLY |
A UUID that is valid only on this computer has been allocated. |
0x00000721 RPC_S_SEC_PKG_ERROR |
A security package-specific error occurred. |
0x00000722 RPC_S_NOT_CANCELLED |
The thread is not canceled. |
0x00000723 RPC_X_INVALID_ES_ACTION |
Invalid operation on the encoding/decoding handle. |
0x00000724 RPC_X_WRONG_ES_VERSION |
Incompatible version of the serializing package. |
0x00000725 RPC_X_WRONG_STUB_VERSION |
Incompatible version of the RPC stub. |
0x00000726 RPC_X_INVALID_PIPE_OBJECT |
The RPC pipe object is invalid or corrupted. |
0x00000727 RPC_X_WRONG_PIPE_ORDER |
An invalid operation was attempted on an RPC pipe object. |
0x00000728 RPC_X_WRONG_PIPE_VERSION |
Unsupported RPC pipe version. |
0x0000076A RPC_S_GROUP_MEMBER_NOT_FOUND |
The group member was not found. |
0x0000076B EPT_S_CANT_CREATE |
The endpoint mapper database entry could not be created. |
0x0000076C RPC_S_INVALID_OBJECT |
The object UUID is the nil UUID. |
0x0000076D ERROR_INVALID_TIME |
The specified time is invalid. |
0x0000076E ERROR_INVALID_FORM_NAME |
The specified form name is invalid. |
0x0000076F ERROR_INVALID_FORM_SIZE |
The specified form size is invalid. |
0x00000770 ERROR_ALREADY_WAITING |
The specified printer handle is already being waited on. |
0x00000771 ERROR_PRINTER_DELETED |
The specified printer has been deleted. |
0x00000772 ERROR_INVALID_PRINTER_STATE |
The state of the printer is invalid. |
0x00000773 ERROR_PASSWORD_MUST_CHANGE |
The user's password must be changed before logging on the first time. |
0x00000774 ERROR_DOMAIN_CONTROLLER_NOT_FOUND |
Could not find the domain controller for this domain. |
0x00000775 ERROR_ACCOUNT_LOCKED_OUT |
The referenced account is currently locked out and cannot be logged on to. |
0x00000776 OR_INVALID_OXID |
The object exporter specified was not found. |
0x00000777 OR_INVALID_OID |
The object specified was not found. |
0x00000778 OR_INVALID_SET |
The object set specified was not found. |
0x00000779 RPC_S_SEND_INCOMPLETE |
Some data remains to be sent in the request buffer. |
0x0000077A RPC_S_INVALID_ASYNC_HANDLE |
Invalid asynchronous RPC handle. |
0x0000077B RPC_S_INVALID_ASYNC_CALL |
Invalid asynchronous RPC call handle for this operation. |
0x0000077C RPC_X_PIPE_CLOSED |
The RPC pipe object has already been closed. |
0x0000077D RPC_X_PIPE_DISCIPLINE_ERROR |
The RPC call completed before all pipes were processed. |
0x0000077E RPC_X_PIPE_EMPTY |
No more data is available from the RPC pipe. |
0x0000077F ERROR_NO_SITENAME |
No site name is available for this machine. |
0x00000780 ERROR_CANT_ACCESS_FILE |
The file cannot be accessed by the system. |
0x00000781 ERROR_CANT_RESOLVE_FILENAME |
The name of the file cannot be resolved by the system. |
0x00000782 RPC_S_ENTRY_TYPE_MISMATCH |
The entry is not of the expected type. |
0x00000783 RPC_S_NOT_ALL_OBJS_EXPORTED |
Not all object UUIDs could be exported to the specified entry. |
0x00000784 RPC_S_INTERFACE_NOT_EXPORTED |
The interface could not be exported to the specified entry. |
0x00000785 RPC_S_PROFILE_NOT_ADDED |
The specified profile entry could not be added. |
0x00000786 RPC_S_PRF_ELT_NOT_ADDED |
The specified profile element could not be added. |
0x00000787 RPC_S_PRF_ELT_NOT_REMOVED |
The specified profile element could not be removed. |
0x00000788 RPC_S_GRP_ELT_NOT_ADDED |
The group element could not be added. |
0x00000789 RPC_S_GRP_ELT_NOT_REMOVED |
The group element could not be removed. |
0x0000078A ERROR_KM_DRIVER_BLOCKED |
The printer driver is not compatible with a policy enabled on your computer that blocks Windows NT 4.0 operating system drivers. |
0x0000078B ERROR_CONTEXT_EXPIRED |
The context has expired and can no longer be used. |
0x0000078C ERROR_PER_USER_TRUST_QUOTA_EXCEEDED |
The current user's delegated trust creation quota has been exceeded. |
0x0000078D ERROR_ALL_USER_TRUST_QUOTA_EXCEEDED |
The total delegated trust creation quota has been exceeded. |
0x0000078E ERROR_USER_DELETE_TRUST_QUOTA_EXCEEDED |
The current user's delegated trust deletion quota has been exceeded. |
0x0000078F ERROR_AUTHENTICATION_FIREWALL_FAILED |
Logon failure: The machine you are logging on to is protected by an authentication firewall. The specified account is not allowed to authenticate to the machine. |
0x00000790 ERROR_REMOTE_PRINT_CONNECTIONS_BLOCKED |
Remote connections to the Print Spooler are blocked by a policy set on your machine. |
0x000007D0 ERROR_INVALID_PIXEL_FORMAT |
The pixel format is invalid. |
0x000007D1 ERROR_BAD_DRIVER |
The specified driver is invalid. |
0x000007D2 ERROR_INVALID_WINDOW_STYLE |
The window style or class attribute is invalid for this operation. |
0x000007D3 ERROR_METAFILE_NOT_SUPPORTED |
The requested metafile operation is not supported. |
0x000007D4 ERROR_TRANSFORM_NOT_SUPPORTED |
The requested transformation operation is not supported. |
0x000007D5 ERROR_CLIPPING_NOT_SUPPORTED |
The requested clipping operation is not supported. |
0x000007DA ERROR_INVALID_CMM |
The specified color management module is invalid. |
0x000007DB ERROR_INVALID_PROFILE |
The specified color profile is invalid. |
0x000007DC ERROR_TAG_NOT_FOUND |
The specified tag was not found. |
0x000007DD ERROR_TAG_NOT_PRESENT |
A required tag is not present. |
0x000007DE ERROR_DUPLICATE_TAG |
The specified tag is already present. |
0x000007DF ERROR_PROFILE_NOT_ASSOCIATED_WITH_DEVICE |
The specified color profile is not associated with any device. |
0x000007E0 ERROR_PROFILE_NOT_FOUND |
The specified color profile was not found. |
0x000007E1 ERROR_INVALID_COLORSPACE |
The specified color space is invalid. |
0x000007E2 ERROR_ICM_NOT_ENABLED |
Image Color Management is not enabled. |
0x000007E3 ERROR_DELETING_ICM_XFORM |
There was an error while deleting the color transform. |
0x000007E4 ERROR_INVALID_TRANSFORM |
The specified color transform is invalid. |
0x000007E5 ERROR_COLORSPACE_MISMATCH |
The specified transform does not match the bitmap's color space. |
0x000007E6 ERROR_INVALID_COLORINDEX |
The specified named color index is not present in the profile. |
0x000007E7 ERROR_PROFILE_DOES_NOT_MATCH_DEVICE |
The specified profile is intended for a device of a different type than the specified device. |
0x00000836 NERR_NetNotStarted |
The workstation driver is not installed. |
0x00000837 NERR_UnknownServer |
The server could not be located. |
0x00000838 NERR_ShareMem |
An internal error occurred. The network cannot access a shared memory segment. |
0x00000839 NERR_NoNetworkResource |
A network resource shortage occurred. |
0x0000083A NERR_RemoteOnly |
This operation is not supported on workstations. |
0x0000083B NERR_DevNotRedirected |
The device is not connected. |
0x0000083C ERROR_CONNECTED_OTHER_PASSWORD |
The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified. |
0x0000083D ERROR_CONNECTED_OTHER_PASSWORD_DEFAULT |
The network connection was made successfully using default credentials. |
0x00000842 NERR_ServerNotStarted |
The Server service is not started. |
0x00000843 NERR_ItemNotFound |
The queue is empty. |
0x00000844 NERR_UnknownDevDir |
The device or directory does not exist. |
0x00000845 NERR_RedirectedPath |
The operation is invalid on a redirected resource. |
0x00000846 NERR_DuplicateShare |
The name has already been shared. |
0x00000847 NERR_NoRoom |
The server is currently out of the requested resource. |
0x00000849 NERR_TooManyItems |
Requested addition of items exceeds the maximum allowed. |
0x0000084A NERR_InvalidMaxUsers |
The Peer service supports only two simultaneous users. |
0x0000084B NERR_BufTooSmall |
The API return buffer is too small. |
0x0000084F NERR_RemoteErr |
A remote API error occurred. |
0x00000853 NERR_LanmanIniError |
An error occurred when opening or reading the configuration file. |
0x00000858 NERR_NetworkError |
A general network error occurred. |
0x00000859 NERR_WkstaInconsistentState |
The Workstation service is in an inconsistent state. Restart the computer before restarting the Workstation service. |
0x0000085A NERR_WkstaNotStarted |
The Workstation service has not been started. |
0x0000085B NERR_BrowserNotStarted |
The requested information is not available. |
0x0000085C NERR_InternalError |
An internal error occurred. |
0x0000085D NERR_BadTransactConfig |
The server is not configured for transactions. |
0x0000085E NERR_InvalidAPI |
The requested API is not supported on the remote server. |
0x0000085F NERR_BadEventName |
The event name is invalid. |
0x00000860 NERR_DupNameReboot |
The computer name already exists on the network. Change it and reboot the computer. |
0x00000862 NERR_CfgCompNotFound |
The specified component could not be found in the configuration information. |
0x00000863 NERR_CfgParamNotFound |
The specified parameter could not be found in the configuration information. |
0x00000865 NERR_LineTooLong |
A line in the configuration file is too long. |
0x00000866 NERR_QNotFound |
The printer does not exist. |
0x00000867 NERR_JobNotFound |
The print job does not exist. |
0x00000868 NERR_DestNotFound |
The printer destination cannot be found. |
0x00000869 NERR_DestExists |
The printer destination already exists. |
0x0000086A NERR_QExists |
The print queue already exists. |
0x0000086B NERR_QNoRoom |
No more printers can be added. |
0x0000086C NERR_JobNoRoom |
No more print jobs can be added. |
0x0000086D NERR_DestNoRoom |
No more printer destinations can be added. |
0x0000086E NERR_DestIdle |
This printer destination is idle and cannot accept control operations. |
0x0000086F NERR_DestInvalidOp |
This printer destination request contains an invalid control function. |
0x00000870 NERR_ProcNoRespond |
The print processor is not responding. |
0x00000871 NERR_SpoolerNotLoaded |
The spooler is not running. |
0x00000872 NERR_DestInvalidState |
This operation cannot be performed on the print destination in its current state. |
0x00000873 NERR_QinvalidState |
This operation cannot be performed on the print queue in its current state. |
0x00000874 NERR_JobInvalidState |
This operation cannot be performed on the print job in its current state. |
0x00000875 NERR_SpoolNoMemory |
A spooler memory allocation failure occurred. |
0x00000876 NERR_DriverNotFound |
The device driver does not exist. |
0x00000877 NERR_DataTypeInvalid |
The data type is not supported by the print processor. |
0x00000878 NERR_ProcNotFound |
The print processor is not installed. |
0x00000884 NERR_ServiceTableLocked |
The service database is locked. |
0x00000885 NERR_ServiceTableFull |
The service table is full. |
0x00000886 NERR_ServiceInstalled |
The requested service has already been started. |
0x00000887 NERR_ServiceEntryLocked |
The service does not respond to control actions. |
0x00000888 NERR_ServiceNotInstalled |
The service has not been started. |
0x00000889 NERR_BadServiceName |
The service name is invalid. |
0x0000088A NERR_ServiceCtlTimeout |
The service is not responding to the control function. |
0x0000088B NERR_ServiceCtlBusy |
The service control is busy. |
0x0000088C NERR_BadServiceProgName |
The configuration file contains an invalid service program name. |
0x0000088D NERR_ServiceNotCtrl |
The service could not be controlled in its present state. |
0x0000088E NERR_ServiceKillProc |
The service ended abnormally. |
0x0000088F NERR_ServiceCtlNotValid |
The requested pause or stop is not valid for this service. |
0x00000890 NERR_NotInDispatchTbl |
The service control dispatcher could not find the service name in the dispatch table. |
0x00000891 NERR_BadControlRecv |
The service control dispatcher pipe read failed. |
0x00000892 NERR_ServiceNotStarting |
A thread for the new service could not be created. |
0x00000898 NERR_AlreadyLoggedOn |
This workstation is already logged on to the LAN. |
0x00000899 NERR_NotLoggedOn |
The workstation is not logged on to the LAN. |
0x0000089A NERR_BadUsername |
The user name or group name parameter is invalid. |
0x0000089B NERR_BadPassword |
The password parameter is invalid. |
0x0000089C NERR_UnableToAddName_W |
The logon processor did not add the message alias. |
0x0000089D NERR_UnableToAddName_F |
The logon processor did not add the message alias. |
0x0000089E NERR_UnableToDelName_W |
The logoff processor did not delete the message alias. |
0x0000089F NERR_UnableToDelName_F |
The logoff processor did not delete the message alias. |
0x000008A1 NERR_LogonsPaused |
Network logons are paused. |
0x000008A2 NERR_LogonServerConflict |
A centralized logon server conflict occurred. |
0x000008A3 NERR_LogonNoUserPath |
The server is configured without a valid user path. |
0x000008A4 NERR_LogonScriptError |
An error occurred while loading or running the logon script. |
0x000008A6 NERR_StandaloneLogon |
The logon server was not specified. The computer will be logged on as STANDALONE. |
0x000008A7 NERR_LogonServerNotFound |
The logon server could not be found. |
0x000008A8 NERR_LogonDomainExists |
There is already a logon domain for this computer. |
0x000008A9 NERR_NonValidatedLogon |
The logon server could not validate the logon. |
0x000008AB NERR_ACFNotFound |
The security database could not be found. |
0x000008AC NERR_GroupNotFound |
The group name could not be found. |
0x000008AD NERR_UserNotFound |
The user name could not be found. |
0x000008AE NERR_ResourceNotFound |
The resource name could not be found. |
0x000008AF NERR_GroupExists |
The group already exists. |
0x000008B0 NERR_UserExists |
The user account already exists. |
0x000008B1 NERR_ResourceExists |
The resource permission list already exists. |
0x000008B2 NERR_NotPrimary |
This operation is allowed only on the PDC of the domain. |
0x000008B3 NERR_ACFNotLoaded |
The security database has not been started. |
0x000008B4 NERR_ACFNoRoom |
There are too many names in the user accounts database. |
0x000008B5 NERR_ACFFileIOFail |
A disk I/O failure occurred. |
0x000008B6 NERR_ACFTooManyLists |
The limit of 64 entries per resource was exceeded. |
0x000008B7 NERR_UserLogon |
Deleting a user with a session is not allowed. |
0x000008B8 NERR_ACFNoParent |
The parent directory could not be located. |
0x000008B9 NERR_CanNotGrowSegment |
Unable to add to the security database session cache segment. |
0x000008BA NERR_SpeGroupOp |
This operation is not allowed on this special group. |
0x000008BB NERR_NotInCache |
This user is not cached in the user accounts database session cache. |
0x000008BC NERR_UserInGroup |
The user already belongs to this group. |
0x000008BD NERR_UserNotInGroup |
The user does not belong to this group. |
0x000008BE NERR_AccountUndefined |
This user account is undefined. |
0x000008BF NERR_AccountExpired |
This user account has expired. |
0x000008C0 NERR_InvalidWorkstation |
The user is not allowed to log on from this workstation. |
0x000008C1 NERR_InvalidLogonHours |
The user is not allowed to log on at this time. |
0x000008C2 NERR_PasswordExpired |
The password of this user has expired. |
0x000008C3 NERR_PasswordCantChange |
The password of this user cannot change. |
0x000008C4 NERR_PasswordHistConflict |
This password cannot be used now. |
0x000008C5 NERR_PasswordTooShort |
The password does not meet the password policy requirements. Check the minimum password length, password complexity, and password history requirements. |
0x000008C6 NERR_PasswordTooRecent |
The password of this user is too recent to change. |
0x000008C7 NERR_InvalidDatabase |
The security database is corrupted. |
0x000008C8 NERR_DatabaseUpToDate |
No updates are necessary to this replicant network or local security database. |
0x000008C9 NERR_SyncRequired |
This replicant database is outdated; synchronization is required. |
0x000008CA NERR_UseNotFound |
The network connection could not be found. |
0x000008CB NERR_BadAsgType |
This asg_type is invalid. |
0x000008CC NERR_DeviceIsShared |
This device is currently being shared. |
0x000008DE NERR_NoComputerName |
The computer name could not be added as a message alias. The name might already exist on the network. |
0x000008DF NERR_MsgAlreadyStarted |
The Messenger service is already started. |
0x000008E0 NERR_MsgInitFailed |
The Messenger service failed to start. |
0x000008E1 NERR_NameNotFound |
The message alias could not be found on the network. |
0x000008E2 NERR_AlreadyForwarded |
This message alias has already been forwarded. |
0x000008E3 NERR_AddForwarded |
This message alias has been added but is still forwarded. |
0x000008E4 NERR_AlreadyExists |
This message alias already exists locally. |
0x000008E5 NERR_TooManyNames |
The maximum number of added message aliases has been exceeded. |
0x000008E6 NERR_DelComputerName |
The computer name could not be deleted. |
0x000008E7 NERR_LocalForward |
Messages cannot be forwarded back to the same workstation. |
0x000008E8 NERR_GrpMsgProcessor |
An error occurred in the domain message processor. |
0x000008E9 NERR_PausedRemote |
The message was sent, but the recipient has paused the Messenger service. |
0x000008EA NERR_BadReceive |
The message was sent but not received. |
0x000008EB NERR_NameInUse |
The message alias is currently in use. Try again later. |
0x000008EC NERR_MsgNotStarted |
The Messenger service has not been started. |
0x000008ED NERR_NotLocalName |
The name is not on the local computer. |
0x000008EE NERR_NoForwardName |
The forwarded message alias could not be found on the network. |
0x000008EF NERR_RemoteFull |
The message alias table on the remote station is full. |
0x000008F0 NERR_NameNotForwarded |
Messages for this alias are not currently being forwarded. |
0x000008F1 NERR_TruncatedBroadcast |
The broadcast message was truncated. |
0x000008F6 NERR_InvalidDevice |
This is an invalid device name. |
0x000008F7 NERR_WriteFault |
A write fault occurred. |
0x000008F9 NERR_DuplicateName |
A duplicate message alias exists on the network. |
0x000008FA NERR_DeleteLater |
This message alias will be deleted later. |
0x000008FB NERR_IncompleteDel |
The message alias was not successfully deleted from all networks. |
0x000008FC NERR_MultipleNets |
This operation is not supported on computers with multiple networks. |
0x00000906 NERR_NetNameNotFound |
This shared resource does not exist. |
0x00000907 NERR_DeviceNotShared |
This device is not shared. |
0x00000908 NERR_ClientNameNotFound |
A session does not exist with that computer name. |
0x0000090A NERR_FileIdNotFound |
There is not an open file with that identification number. |
0x0000090B NERR_ExecFailure |
A failure occurred when executing a remote administration command. |
0x0000090C NERR_TmpFile |
A failure occurred when opening a remote temporary file. |
0x0000090D NERR_TooMuchData |
The data returned from a remote administration command has been truncated to 64 KB. |
0x0000090E NERR_DeviceShareConflict |
This device cannot be shared as both a spooled and a nonspooled resource. |
0x0000090F NERR_BrowserTableIncomplete |
The information in the list of servers might be incorrect. |
0x00000910 NERR_NotLocalDomain |
The computer is not active in this domain. |
0x00000911 NERR_IsDfsShare |
The share must be removed from the Distributed File System (DFS) before it can be deleted. |
0x0000091B NERR_DevInvalidOpCode |
The operation is invalid for this device. |
0x0000091C NERR_DevNotFound |
This device cannot be shared. |
0x0000091D NERR_DevNotOpen |
This device was not open. |
0x0000091E NERR_BadQueueDevString |
This device name list is invalid. |
0x0000091F NERR_BadQueuePriority |
The queue priority is invalid. |
0x00000921 NERR_NoCommDevs |
There are no shared communication devices. |
0x00000922 NERR_QueueNotFound |
The queue you specified does not exist. |
0x00000924 NERR_BadDevString |
This list of devices is invalid. |
0x00000925 NERR_BadDev |
The requested device is invalid. |
0x00000926 NERR_InUseBySpooler |
This device is already in use by the spooler. |
0x00000927 NERR_CommDevInUse |
This device is already in use as a communication device. |
0x0000092F NERR_InvalidComputer |
This computer name is invalid. |
0x00000932 NERR_MaxLenExceeded |
The string and prefix specified are too long. |
0x00000934 NERR_BadComponent |
This path component is invalid. |
0x00000935 NERR_CantType |
Could not determine the type of input. |
0x0000093A NERR_TooManyEntries |
The buffer for types is not big enough. |
0x00000942 NERR_ProfileFileTooBig |
Profile files cannot exceed 64 KB. |
0x00000943 NERR_ProfileOffset |
The start offset is out of range. |
0x00000944 NERR_ProfileCleanup |
The system cannot delete current connections to network resources. |
0x00000945 NERR_ProfileUnknownCmd |
The system was unable to parse the command line in this file. |
0x00000946 NERR_ProfileLoadErr |
An error occurred while loading the profile file. |
0x00000947 NERR_ProfileSaveErr |
Errors occurred while saving the profile file. The profile was partially saved. |
0x00000949 NERR_LogOverflow |
Log file %1 is full. |
0x0000094A NERR_LogFileChanged |
This log file has changed between reads. |
0x0000094B NERR_LogFileCorrupt |
Log file %1 is corrupt. |
0x0000094C NERR_SourceIsDir |
The source path cannot be a directory. |
0x0000094D NERR_BadSource |
The source path is illegal. |
0x0000094E NERR_BadDest |
The destination path is illegal. |
0x0000094F NERR_DifferentServers |
The source and destination paths are on different servers. |
0x00000951 NERR_RunSrvPaused |
The Run server you requested is paused. |
0x00000955 NERR_ErrCommRunSrv |
An error occurred when communicating with a Run server. |
0x00000957 NERR_ErrorExecingGhost |
An error occurred when starting a background process. |
0x00000958 NERR_ShareNotFound |
The shared resource you are connected to could not be found. |
0x00000960 NERR_InvalidLana |
The LAN adapter number is invalid. |
0x00000961 NERR_OpenFiles |
There are open files on the connection. |
0x00000962 NERR_ActiveConns |
Active connections still exist. |
0x00000963 NERR_BadPasswordCore |
This share name or password is invalid. |
0x00000964 NERR_DevInUse |
The device is being accessed by an active process. |
0x00000965 NERR_LocalDrive |
The drive letter is in use locally. |
0x0000097E NERR_AlertExists |
The specified client is already registered for the specified event. |
0x0000097F NERR_TooManyAlerts |
The alert table is full. |
0x00000980 NERR_NoSuchAlert |
An invalid or nonexistent alert name was raised. |
0x00000981 NERR_BadRecipient |
The alert recipient is invalid. |
0x00000982 NERR_AcctLimitExceeded |
A user's session with this server has been deleted. |
0x00000988 NERR_InvalidLogSeek |
The log file does not contain the requested record number. |
0x00000992 NERR_BadUasConfig |
The user accounts database is not configured correctly. |
0x00000993 NERR_InvalidUASOp |
This operation is not permitted when the Net Logon service is running. |
0x00000994 NERR_LastAdmin |
This operation is not allowed on the last administrative account. |
0x00000995 NERR_DCNotFound |
Could not find the domain controller for this domain. |
0x00000996 NERR_LogonTrackingError |
Could not set logon information for this user. |
0x00000997 NERR_NetlogonNotStarted |
The Net Logon service has not been started. |
0x00000998 NERR_CanNotGrowUASFile |
Unable to add to the user accounts database. |
0x00000999 NERR_TimeDiffAtDC |
This server's clock is not synchronized with the PDC's clock. |
0x0000099A NERR_PasswordMismatch |
A password mismatch has been detected. |
0x0000099C NERR_NoSuchServer |
The server identification does not specify a valid server. |
0x0000099D NERR_NoSuchSession |
The session identification does not specify a valid session. |
0x0000099E NERR_NoSuchConnection |
The connection identification does not specify a valid connection. |
0x0000099F NERR_TooManyServers |
There is no space for another entry in the table of available servers. |
0x000009A0 NERR_TooManySessions |
The server has reached the maximum number of sessions it supports. |
0x000009A1 NERR_TooManyConnections |
The server has reached the maximum number of connections it supports. |
0x000009A2 NERR_TooManyFiles |
The server cannot open more files because it has reached its maximum number. |
0x000009A3 NERR_NoAlternateServers |
There are no alternate servers registered on this server. |
0x000009A6 NERR_TryDownLevel |
Try the down-level (remote admin protocol) version of API instead. |
0x000009B0 NERR_UPSDriverNotStarted |
The uninterruptible power supply (UPS) driver could not be accessed by the UPS service. |
0x000009B1 NERR_UPSInvalidConfig |
The UPS service is not configured correctly. |
0x000009B2 NERR_UPSInvalidCommPort |
The UPS service could not access the specified Comm Port. |
0x000009B3 NERR_UPSSignalAsserted |
The UPS indicated a line fail or low battery situation. Service not started. |
0x000009B4 NERR_UPSShutdownFailed |
The UPS service failed to perform a system shut down. |
0x000009C4 NERR_BadDosRetCode |
The program below returned an MS-DOS error code. |
0x000009C5 NERR_ProgNeedsExtraMem |
The program below needs more memory. |
0x000009C6 NERR_BadDosFunction |
The program below called an unsupported MS-DOS function. |
0x000009C7 NERR_RemoteBootFailed |
The workstation failed to boot. |
0x000009C8 NERR_BadFileCheckSum |
The file below is corrupt. |
0x000009C9 NERR_NoRplBootSystem |
No loader is specified in the boot-block definition file. |
0x000009CA NERR_RplLoadrNetBiosErr |
NetBIOS returned an error: The network control blocks (NCBs) and Server Message Block (SMB) are dumped above. |
0x000009CB NERR_RplLoadrDiskErr |
A disk I/O error occurred. |
0x000009CC NERR_ImageParamErr |
Image parameter substitution failed. |
0x000009CD NERR_TooManyImageParams |
Too many image parameters cross disk sector boundaries. |
0x000009CE NERR_NonDosFloppyUsed |
The image was not generated from an MS-DOS disk formatted with /S. |
0x000009CF NERR_RplBootRestart |
Remote boot will be restarted later. |
0x000009D0 NERR_RplSrvrCallFailed |
The call to the Remoteboot server failed. |
0x000009D1 NERR_CantConnectRplSrvr |
Cannot connect to the Remoteboot server. |
0x000009D2 NERR_CantOpenImageFile |
Cannot open image file on the Remoteboot server. |
0x000009D3 NERR_CallingRplSrvr |
Connecting to the Remoteboot server. |
0x000009D4 NERR_StartingRplBoot |
Connecting to the Remoteboot server. |
0x000009D5 NERR_RplBootServiceTerm |
Remote boot service was stopped, check the error log for the cause of the problem. |
0x000009D6 NERR_RplBootStartFailed |
Remote boot startup failed; check the error log for the cause of the problem. |
0x000009D7 NERR_RPL_CONNECTED |
A second connection to a Remoteboot resource is not allowed. |
0x000009F6 NERR_BrowserConfiguredToNotRun |
The browser service was configured with MaintainServerList=No. |
0x00000A32 NERR_RplNoAdaptersStarted |
Service failed to start because none of the network adapters started with this service. |
0x00000A33 NERR_RplBadRegistry |
Service failed to start due to bad startup information in the registry. |
0x00000A34 NERR_RplBadDatabase |
Service failed to start because its database is absent or corrupt. |
0x00000A35 NERR_RplRplfilesShare |
Service failed to start because the RPLFILES share is absent. |
0x00000A36 NERR_RplNotRplServer |
Service failed to start because the RPLUSER group is absent. |
0x00000A37 NERR_RplCannotEnum |
Cannot enumerate service records. |
0x00000A38 NERR_RplWkstaInfoCorrupted |
Workstation record information has been corrupted. |
0x00000A39 NERR_RplWkstaNotFound |
Workstation record was not found. |
0x00000A3A NERR_RplWkstaNameUnavailable |
Workstation name is in use by some other workstation. |
0x00000A3B NERR_RplProfileInfoCorrupted |
Profile record information has been corrupted. |
0x00000A3C NERR_RplProfileNotFound |
Profile record was not found. |
0x00000A3D NERR_RplProfileNameUnavailable |
Profile name is in use by some other profile. |
0x00000A3E NERR_RplProfileNotEmpty |
There are workstations using this profile. |
0x00000A3F NERR_RplConfigInfoCorrupted |
Configuration record information has been corrupted. |
0x00000A40 NERR_RplConfigNotFound |
Configuration record was not found. |
0x00000A41 NERR_RplAdapterInfoCorrupted |
Adapter ID record information has been corrupted. |
0x00000A42 NERR_RplInternal |
An internal service error has occurred. |
0x00000A43 NERR_RplVendorInfoCorrupted |
Vendor ID record information has been corrupted. |
0x00000A44 NERR_RplBootInfoCorrupted |
Boot block record information has been corrupted. |
0x00000A45 NERR_RplWkstaNeedsUserAcct |
The user account for this workstation record is missing. |
0x00000A46 NERR_RplNeedsRPLUSERAcct |
The RPLUSER local group could not be found. |
0x00000A47 NERR_RplBootNotFound |
Boot block record was not found. |
0x00000A48 NERR_RplIncompatibleProfile |
Chosen profile is incompatible with this workstation. |
0x00000A49 NERR_RplAdapterNameUnavailable |
Chosen network adapter ID is in use by some other workstation. |
0x00000A4A NERR_RplConfigNotEmpty |
There are profiles using this configuration. |
0x00000A4B NERR_RplBootInUse |
There are workstations, profiles, or configurations using this boot block. |
0x00000A4C NERR_RplBackupDatabase |
Service failed to back up the Remoteboot database. |
0x00000A4D NERR_RplAdapterNotFound |
Adapter record was not found. |
0x00000A4E NERR_RplVendorNotFound |
Vendor record was not found. |
0x00000A4F NERR_RplVendorNameUnavailable |
Vendor name is in use by some other vendor record. |
0x00000A50 NERR_RplBootNameUnavailable |
The boot name or vendor ID is in use by some other boot block record. |
0x00000A51 NERR_RplConfigNameUnavailable |
The configuration name is in use by some other configuration. |
0x00000A64 NERR_DfsInternalCorruption |
The internal database maintained by the DFS service is corrupt. |
0x00000A65 NERR_DfsVolumeDataCorrupt |
One of the records in the internal DFS database is corrupt. |
0x00000A66 NERR_DfsNoSuchVolume |
There is no DFS name whose entry path matches the input entry path. |
0x00000A67 NERR_DfsVolumeAlreadyExists |
A root or link with the given name already exists. |
0x00000A68 NERR_DfsAlreadyShared |
The server share specified is already shared in the DFS. |
0x00000A69 NERR_DfsNoSuchShare |
The indicated server share does not support the indicated DFS namespace. |
0x00000A6A NERR_DfsNotALeafVolume |
The operation is not valid in this portion of the namespace. |
0x00000A6B NERR_DfsLeafVolume |
The operation is not valid in this portion of the namespace. |
0x00000A6C NERR_DfsVolumeHasMultipleServers |
The operation is ambiguous because the link has multiple servers. |
0x00000A6D NERR_DfsCantCreateJunctionPoint |
Unable to create a link. |
0x00000A6E NERR_DfsServerNotDfsAware |
The server is not DFS-aware. |
0x00000A6F NERR_DfsBadRenamePath |
The specified rename target path is invalid. |
0x00000A70 NERR_DfsVolumeIsOffline |
The specified DFS link is offline. |
0x00000A71 NERR_DfsNoSuchServer |
The specified server is not a server for this link. |
0x00000A72 NERR_DfsCyclicalName |
A cycle in the DFS name was detected. |
0x00000A73 NERR_DfsNotSupportedInServerDfs |
The operation is not supported on a server-based DFS. |
0x00000A74 NERR_DfsDuplicateService |
This link is already supported by the specified server share. |
0x00000A75 NERR_DfsCantRemoveLastServerShare |
Cannot remove the last server share supporting this root or link. |
0x00000A76 NERR_DfsVolumeIsInterDfs |
The operation is not supported for an inter-DFS link. |
0x00000A77 NERR_DfsInconsistent |
The internal state of the DFS Service has become inconsistent. |
0x00000A78 NERR_DfsServerUpgraded |
The DFS Service has been installed on the specified server. |
0x00000A79 NERR_DfsDataIsIdentical |
The DFS data being reconciled is identical. |
0x00000A7A NERR_DfsCantRemoveDfsRoot |
The DFS root cannot be deleted. Uninstall DFS if required. |
0x00000A7B NERR_DfsChildOrParentInDfs |
A child or parent directory of the share is already in a DFS. |
0x00000A82 NERR_DfsInternalError |
DFS internal error. |
0x00000A83 NERR_SetupAlreadyJoined |
This machine is already joined to a domain. |
0x00000A84 NERR_SetupNotJoined |
This machine is not currently joined to a domain. |
0x00000A85 NERR_SetupDomainController |
This machine is a domain controller and cannot be unjoined from a domain. |
0x00000A86 NERR_DefaultJoinRequired |
The destination domain controller does not support creating machine accounts in organizational units (OUs). |
0x00000A87 NERR_InvalidWorkgroupName |
The specified workgroup name is invalid. |
0x00000A88 NERR_NameUsesIncompatibleCodePage |
The specified computer name is incompatible with the default language used on the domain controller. |
0x00000A89 NERR_ComputerAccountNotFound |
The specified computer account could not be found. |
0x00000A8A NERR_PersonalSku |
This version of Windows cannot be joined to a domain. |
0x00000A8D NERR_PasswordMustChange |
The password must change at the next logon. |
0x00000A8E NERR_AccountLockedOut |
The account is locked out. |
0x00000A8F NERR_PasswordTooLong |
The password is too long. |
0x00000A90 NERR_PasswordNotComplexEnough |
The password does not meet the complexity policy. |
0x00000A91 NERR_PasswordFilterError |
The password does not meet the requirements of the password filter DLLs. |
0x00000BB8 ERROR_UNKNOWN_PRINT_MONITOR |
The specified print monitor is unknown. |
0x00000BB9 ERROR_PRINTER_DRIVER_IN_USE |
The specified printer driver is currently in use. |
0x00000BBA ERROR_SPOOL_FILE_NOT_FOUND |
The spool file was not found. |
0x00000BBB ERROR_SPL_NO_STARTDOC |
A StartDocPrinter call was not issued. |
0x00000BBC ERROR_SPL_NO_ADDJOB |
An AddJob call was not issued. |
0x00000BBD ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED |
The specified print processor has already been installed. |
0x00000BBE ERROR_PRINT_MONITOR_ALREADY_INSTALLED |
The specified print monitor has already been installed. |
0x00000BBF ERROR_INVALID_PRINT_MONITOR |
The specified print monitor does not have the required functions. |
0x00000BC0 ERROR_PRINT_MONITOR_IN_USE |
The specified print monitor is currently in use. |
0x00000BC1 ERROR_PRINTER_HAS_JOBS_QUEUED |
The requested operation is not allowed when there are jobs queued to the printer. |
0x00000BC2 ERROR_SUCCESS_REBOOT_REQUIRED |
The requested operation is successful. Changes will not be effective until the system is rebooted. |
0x00000BC3 ERROR_SUCCESS_RESTART_REQUIRED |
The requested operation is successful. Changes will not be effective until the service is restarted. |
0x00000BC4 ERROR_PRINTER_NOT_FOUND |
No printers were found. |
0x00000BC5 ERROR_PRINTER_DRIVER_WARNED |
The printer driver is known to be unreliable. |
0x00000BC6 ERROR_PRINTER_DRIVER_BLOCKED |
The printer driver is known to harm the system. |
0x00000BC7 ERROR_PRINTER_DRIVER_PACKAGE_IN_USE |
The specified printer driver package is currently in use. |
0x00000BC8 ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND |
Unable to find a core driver package that is required by the printer driver package. |
0x00000BC9 ERROR_FAIL_REBOOT_REQUIRED |
The requested operation failed. A system reboot is required to roll back changes made. |
0x00000BCA ERROR_FAIL_REBOOT_INITIATED |
The requested operation failed. A system reboot has been initiated to roll back changes made. |
0x00000BCB |
The specified printer driver was not found on the system and needs to be downloaded. |
0x00000BCE ERROR_PRINTER_NOT_SHAREABLE |
The specified printer cannot be shared. |
0x00000F6E ERROR_IO_REISSUE_AS_CACHED |
Reissue the given operation as a cached I/O operation. |
0x00000FA0 ERROR_WINS_INTERNAL |
Windows Internet Name Service (WINS) encountered an error while processing the command. |
0x00000FA1 ERROR_CAN_NOT_DEL_LOCAL_WINS |
The local WINS cannot be deleted. |
0x00000FA2 ERROR_STATIC_INIT |
The importation from the file failed. |
0x00000FA3 ERROR_INC_BACKUP |
The backup failed. Was a full backup done before? |
0x00000FA4 ERROR_FULL_BACKUP |
The backup failed. Check the directory to which you are backing the database. |
0x00000FA5 ERROR_REC_NON_EXISTENT |
The name does not exist in the WINS database. |
0x00000FA6 ERROR_RPL_NOT_ALLOWED |
Replication with a nonconfigured partner is not allowed. |
0x00000FD2 PEERDIST_ERROR_CONTENTINFO_VERSION_UNSUPPORTED |
The version of the supplied content information is not supported. |
0x00000FD3 PEERDIST_ERROR_CANNOT_PARSE_CONTENTINFO |
The supplied content information is malformed. |
0x00000FD4 PEERDIST_ERROR_MISSING_DATA |
The requested data cannot be found in local or peer caches. |
0x00000FD5 PEERDIST_ERROR_NO_MORE |
No more data is available or required. |
0x00000FD6 PEERDIST_ERROR_NOT_INITIALIZED |
The supplied object has not been initialized. |
0x00000FD7 PEERDIST_ERROR_ALREADY_INITIALIZED |
The supplied object has already been initialized. |
0x00000FD8 PEERDIST_ERROR_SHUTDOWN_IN_PROGRESS |
A shutdown operation is already in progress. |
0x00000FD9 PEERDIST_ERROR_INVALIDATED |
The supplied object has already been invalidated. |
0x00000FDA PEERDIST_ERROR_ALREADY_EXISTS |
An element already exists and was not replaced. |
0x00000FDB PEERDIST_ERROR_OPERATION_NOTFOUND |
Cannot cancel the requested operation as it has already been completed. |
0x00000FDC PEERDIST_ERROR_ALREADY_COMPLETED |
Cannot perform the requested operation because it has already been carried out. |
0x00000FDD PEERDIST_ERROR_OUT_OF_BOUNDS |
An operation accessed data beyond the bounds of valid data. |
0x00000FDE PEERDIST_ERROR_VERSION_UNSUPPORTED |
The requested version is not supported. |
0x00000FDF PEERDIST_ERROR_INVALID_CONFIGURATION |
A configuration value is invalid. |
0x00000FE0 PEERDIST_ERROR_NOT_LICENSED |
The SKU is not licensed. |
0x00000FE1 PEERDIST_ERROR_SERVICE_UNAVAILABLE |
PeerDist Service is still initializing and will be available shortly. |
0x00001004 ERROR_DHCP_ADDRESS_CONFLICT |
The Dynamic Host Configuration Protocol (DHCP) client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address. |
0x00001068 ERROR_WMI_GUID_NOT_FOUND |
The GUID passed was not recognized as valid by a WMI data provider. |
0x00001069 ERROR_WMI_INSTANCE_NOT_FOUND |
The instance name passed was not recognized as valid by a WMI data provider. |
0x0000106A ERROR_WMI_ITEMID_NOT_FOUND |
The data item ID passed was not recognized as valid by a WMI data provider. |
0x0000106B ERROR_WMI_TRY_AGAIN |
The WMI request could not be completed and should be retried. |
0x0000106C ERROR_WMI_DP_NOT_FOUND |
The WMI data provider could not be located. |
0x0000106D ERROR_WMI_UNRESOLVED_INSTANCE_REF |
The WMI data provider references an instance set that has not been registered. |
0x0000106E ERROR_WMI_ALREADY_ENABLED |
The WMI data block or event notification has already been enabled. |
0x0000106F ERROR_WMI_GUID_DISCONNECTED |
The WMI data block is no longer available. |
0x00001070 ERROR_WMI_SERVER_UNAVAILABLE |
The WMI data service is not available. |
0x00001071 ERROR_WMI_DP_FAILED |
The WMI data provider failed to carry out the request. |
0x00001072 ERROR_WMI_INVALID_MOF |
The WMI Managed Object Format (MOF) information is not valid. |
0x00001073 ERROR_WMI_INVALID_REGINFO |
The WMI registration information is not valid. |
0x00001074 ERROR_WMI_ALREADY_DISABLED |
The WMI data block or event notification has already been disabled. |
0x00001075 ERROR_WMI_READ_ONLY |
The WMI data item or data block is read-only. |
0x00001076 ERROR_WMI_SET_FAILURE |
The WMI data item or data block could not be changed. |
0x000010CC ERROR_INVALID_MEDIA |
The media identifier does not represent a valid medium. |
0x000010CD ERROR_INVALID_LIBRARY |
The library identifier does not represent a valid library. |
0x000010CE ERROR_INVALID_MEDIA_POOL |
The media pool identifier does not represent a valid media pool. |
0x000010CF ERROR_DRIVE_MEDIA_MISMATCH |
The drive and medium are not compatible, or they exist in different libraries. |
0x000010D0 ERROR_MEDIA_OFFLINE |
The medium currently exists in an offline library and must be online to perform this operation. |
0x000010D1 ERROR_LIBRARY_OFFLINE |
The operation cannot be performed on an offline library. |
0x000010D2 ERROR_EMPTY |
The library, drive, or media pool is empty. |
0x000010D3 ERROR_NOT_EMPTY |
The library, drive, or media pool must be empty to perform this operation. |
0x000010D4 ERROR_MEDIA_UNAVAILABLE |
No media is currently available in this media pool or library. |
0x000010D5 ERROR_RESOURCE_DISABLED |
A resource required for this operation is disabled. |
0x000010D6 ERROR_INVALID_CLEANER |
The media identifier does not represent a valid cleaner. |
0x000010D7 ERROR_UNABLE_TO_CLEAN |
The drive cannot be cleaned or does not support cleaning. |
0x000010D8 ERROR_OBJECT_NOT_FOUND |
The object identifier does not represent a valid object. |
0x000010D9 ERROR_DATABASE_FAILURE |
Unable to read from or write to the database. |
0x000010DA ERROR_DATABASE_FULL |
The database is full. |
0x000010DB ERROR_MEDIA_INCOMPATIBLE |
The medium is not compatible with the device or media pool. |
0x000010DC ERROR_RESOURCE_NOT_PRESENT |
The resource required for this operation does not exist. |
0x000010DD ERROR_INVALID_OPERATION |
The operation identifier is not valid. |
0x000010DE ERROR_MEDIA_NOT_AVAILABLE |
The media is not mounted or ready for use. |
0x000010DF ERROR_DEVICE_NOT_AVAILABLE |
The device is not ready for use. |
0x000010E0 ERROR_REQUEST_REFUSED |
The operator or administrator has refused the request. |
0x000010E1 ERROR_INVALID_DRIVE_OBJECT |
The drive identifier does not represent a valid drive. |
0x000010E2 ERROR_LIBRARY_FULL |
Library is full. No slot is available for use. |
0x000010E3 ERROR_MEDIUM_NOT_ACCESSIBLE |
The transport cannot access the medium. |
0x000010E4 ERROR_UNABLE_TO_LOAD_MEDIUM |
Unable to load the medium into the drive. |
0x000010E5 ERROR_UNABLE_TO_INVENTORY_DRIVE |
Unable to retrieve the drive status. |
0x000010E6 ERROR_UNABLE_TO_INVENTORY_SLOT |
Unable to retrieve the slot status. |
0x000010E7 ERROR_UNABLE_TO_INVENTORY_TRANSPORT |
Unable to retrieve status about the transport. |
0x000010E8 ERROR_TRANSPORT_FULL |
Cannot use the transport because it is already in use. |
0x000010E9 ERROR_CONTROLLING_IEPORT |
Unable to open or close the inject/eject port. |
0x000010EA ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA |
Unable to eject the medium because it is in a drive. |
0x000010EB ERROR_CLEANER_SLOT_SET |
A cleaner slot is already reserved. |
0x000010EC ERROR_CLEANER_SLOT_NOT_SET |
A cleaner slot is not reserved. |
0x000010ED ERROR_CLEANER_CARTRIDGE_SPENT |
The cleaner cartridge has performed the maximum number of drive cleanings. |
0x000010EE ERROR_UNEXPECTED_OMID |
Unexpected on-medium identifier. |
0x000010EF ERROR_CANT_DELETE_LAST_ITEM |
The last remaining item in this group or resource cannot be deleted. |
0x000010F0 ERROR_MESSAGE_EXCEEDS_MAX_SIZE |
The message provided exceeds the maximum size allowed for this parameter. |
0x000010F1 ERROR_VOLUME_CONTAINS_SYS_FILES |
The volume contains system or paging files. |
0x000010F2 ERROR_INDIGENOUS_TYPE |
The media type cannot be removed from this library because at least one drive in the library reports it can support this media type. |
0x000010F3 ERROR_NO_SUPPORTING_DRIVES |
This offline media cannot be mounted on this system because no enabled drives are present that can be used. |
0x000010F4 ERROR_CLEANER_CARTRIDGE_INSTALLED |
A cleaner cartridge is present in the tape library. |
0x000010F5 ERROR_IEPORT_FULL |
Cannot use the IEport because it is not empty. |
0x000010FE ERROR_FILE_OFFLINE |
The remote storage service was not able to recall the file. |
0x000010FF ERROR_REMOTE_STORAGE_NOT_ACTIVE |
The remote storage service is not operational at this time. |
0x00001100 ERROR_REMOTE_STORAGE_MEDIA_ERROR |
The remote storage service encountered a media error. |
0x00001126 ERROR_NOT_A_REPARSE_POINT |
The file or directory is not a reparse point. |
0x00001127 ERROR_REPARSE_ATTRIBUTE_CONFLICT |
The reparse point attribute cannot be set because it conflicts with an existing attribute. |
0x00001128 ERROR_INVALID_REPARSE_DATA |
The data present in the reparse point buffer is invalid. |
0x00001129 ERROR_REPARSE_TAG_INVALID |
The tag present in the reparse point buffer is invalid. |
0x0000112A ERROR_REPARSE_TAG_MISMATCH |
There is a mismatch between the tag specified in the request and the tag present in the reparse point. |
0x00001194 ERROR_VOLUME_NOT_SIS_ENABLED |
Single Instance Storage (SIS) is not available on this volume. |
0x00001389 ERROR_DEPENDENT_RESOURCE_EXISTS |
The operation cannot be completed because other resources depend on this resource. |
0x0000138A ERROR_DEPENDENCY_NOT_FOUND |
The cluster resource dependency cannot be found. |
0x0000138B ERROR_DEPENDENCY_ALREADY_EXISTS |
The cluster resource cannot be made dependent on the specified resource because it is already dependent. |
0x0000138C ERROR_RESOURCE_NOT_ONLINE |
The cluster resource is not online. |
0x0000138D ERROR_HOST_NODE_NOT_AVAILABLE |
A cluster node is not available for this operation. |
0x0000138E ERROR_RESOURCE_NOT_AVAILABLE |
The cluster resource is not available. |
0x0000138F ERROR_RESOURCE_NOT_FOUND |
The cluster resource could not be found. |
0x00001390 ERROR_SHUTDOWN_CLUSTER |
The cluster is being shut down. |
0x00001391 ERROR_CANT_EVICT_ACTIVE_NODE |
A cluster node cannot be evicted from the cluster unless the node is down or it is the last node. |
0x00001392 ERROR_OBJECT_ALREADY_EXISTS |
The object already exists. |
0x00001393 ERROR_OBJECT_IN_LIST |
The object is already in the list. |
0x00001394 ERROR_GROUP_NOT_AVAILABLE |
The cluster group is not available for any new requests. |
0x00001395 ERROR_GROUP_NOT_FOUND |
The cluster group could not be found. |
0x00001396 ERROR_GROUP_NOT_ONLINE |
The operation could not be completed because the cluster group is not online. |
0x00001397 ERROR_HOST_NODE_NOT_RESOURCE_OWNER |
The operation failed because either the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource. |
0x00001398 ERROR_HOST_NODE_NOT_GROUP_OWNER |
The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group. |
0x00001399 ERROR_RESMON_CREATE_FAILED |
The cluster resource could not be created in the specified resource monitor. |
0x0000139A ERROR_RESMON_ONLINE_FAILED |
The cluster resource could not be brought online by the resource monitor. |
0x0000139B ERROR_RESOURCE_ONLINE |
The operation could not be completed because the cluster resource is online. |
0x0000139C ERROR_QUORUM_RESOURCE |
The cluster resource could not be deleted or brought offline because it is the quorum resource. |
0x0000139D ERROR_NOT_QUORUM_CAPABLE |
The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource. |
0x0000139E ERROR_CLUSTER_SHUTTING_DOWN |
The cluster software is shutting down. |
0x0000139F ERROR_INVALID_STATE |
The group or resource is not in the correct state to perform the requested operation. |
0x000013A0 ERROR_RESOURCE_PROPERTIES_STORED |
The properties were stored but not all changes will take effect until the next time the resource is brought online. |
0x000013A1 ERROR_NOT_QUORUM_CLASS |
The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class. |
0x000013A2 ERROR_CORE_RESOURCE |
The cluster resource could not be deleted because it is a core resource. |
0x000013A3 ERROR_QUORUM_RESOURCE_ONLINE_FAILED |
The quorum resource failed to come online. |
0x000013A4 ERROR_QUORUMLOG_OPEN_FAILED |
The quorum log could not be created or mounted successfully. |
0x000013A5 ERROR_CLUSTERLOG_CORRUPT |
The cluster log is corrupt. |
0x000013A6 ERROR_CLUSTERLOG_RECORD_EXCEEDS_MAXSIZE |
The record could not be written to the cluster log because it exceeds the maximum size. |
0x000013A7 ERROR_CLUSTERLOG_EXCEEDS_MAXSIZE |
The cluster log exceeds its maximum size. |
0x000013A8 ERROR_CLUSTERLOG_CHKPOINT_NOT_FOUND |
No checkpoint record was found in the cluster log. |
0x000013A9 ERROR_CLUSTERLOG_NOT_ENOUGH_SPACE |
The minimum required disk space needed for logging is not available. |
0x000013AA ERROR_QUORUM_OWNER_ALIVE |
The cluster node failed to take control of the quorum resource because the resource is owned by another active node. |
0x000013AB ERROR_NETWORK_NOT_AVAILABLE |
A cluster network is not available for this operation. |
0x000013AC ERROR_NODE_NOT_AVAILABLE |
A cluster node is not available for this operation. |
0x000013AD ERROR_ALL_NODES_NOT_AVAILABLE |
All cluster nodes must be running to perform this operation. |
0x000013AE ERROR_RESOURCE_FAILED |
A cluster resource failed. |
0x000013AF ERROR_CLUSTER_INVALID_NODE |
The cluster node is not valid. |
0x000013B0 ERROR_CLUSTER_NODE_EXISTS |
The cluster node already exists. |
0x000013B1 ERROR_CLUSTER_JOIN_IN_PROGRESS |
A node is in the process of joining the cluster. |
0x000013B2 ERROR_CLUSTER_NODE_NOT_FOUND |
The cluster node was not found. |
0x000013B3 ERROR_CLUSTER_LOCAL_NODE_NOT_FOUND |
The cluster local node information was not found. |
0x000013B4 ERROR_CLUSTER_NETWORK_EXISTS |
The cluster network already exists. |
0x000013B5 ERROR_CLUSTER_NETWORK_NOT_FOUND |
The cluster network was not found. |
0x000013B6 ERROR_CLUSTER_NETINTERFACE_EXISTS |
The cluster network interface already exists. |
0x000013B7 ERROR_CLUSTER_NETINTERFACE_NOT_FOUND |
The cluster network interface was not found. |
0x000013B8 ERROR_CLUSTER_INVALID_REQUEST |
The cluster request is not valid for this object. |
0x000013B9 ERROR_CLUSTER_INVALID_NETWORK_PROVIDER |
The cluster network provider is not valid. |
0x000013BA ERROR_CLUSTER_NODE_DOWN |
The cluster node is down. |
0x000013BB ERROR_CLUSTER_NODE_UNREACHABLE |
The cluster node is not reachable. |
0x000013BC ERROR_CLUSTER_NODE_NOT_MEMBER |
The cluster node is not a member of the cluster. |
0x000013BD ERROR_CLUSTER_JOIN_NOT_IN_PROGRESS |
A cluster join operation is not in progress. |
0x000013BE ERROR_CLUSTER_INVALID_NETWORK |
The cluster network is not valid. |
0x000013C0 ERROR_CLUSTER_NODE_UP |
The cluster node is up. |
0x000013C1 ERROR_CLUSTER_IPADDR_IN_USE |
The cluster IP address is already in use. |
0x000013C2 ERROR_CLUSTER_NODE_NOT_PAUSED |
The cluster node is not paused. |
0x000013C3 ERROR_CLUSTER_NO_SECURITY_CONTEXT |
No cluster security context is available. |
0x000013C4 ERROR_CLUSTER_NETWORK_NOT_INTERNAL |
The cluster network is not configured for internal cluster communication. |
0x000013C5 ERROR_CLUSTER_NODE_ALREADY_UP |
The cluster node is already up. |
0x000013C6 ERROR_CLUSTER_NODE_ALREADY_DOWN |
The cluster node is already down. |
0x000013C7 ERROR_CLUSTER_NETWORK_ALREADY_ONLINE |
The cluster network is already online. |
0x000013C8 ERROR_CLUSTER_NETWORK_ALREADY_OFFLINE |
The cluster network is already offline. |
0x000013C9 ERROR_CLUSTER_NODE_ALREADY_MEMBER |
The cluster node is already a member of the cluster. |
0x000013CA ERROR_CLUSTER_LAST_INTERNAL_NETWORK |
The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network. |
0x000013CB ERROR_CLUSTER_NETWORK_HAS_DEPENDENTS |
One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network. |
0x000013CC ERROR_INVALID_OPERATION_ON_QUORUM |
This operation cannot be performed on the cluster resource because it is the quorum resource. This quorum resource cannot be brought offline and its possible owners list cannot be modified. |
0x000013CD ERROR_DEPENDENCY_NOT_ALLOWED |
The cluster quorum resource is not allowed to have any dependencies. |
0x000013CE ERROR_CLUSTER_NODE_PAUSED |
The cluster node is paused. |
0x000013CF ERROR_NODE_CANT_HOST_RESOURCE |
The cluster resource cannot be brought online. The owner node cannot run this resource. |
0x000013D0 ERROR_CLUSTER_NODE_NOT_READY |
The cluster node is not ready to perform the requested operation. |
0x000013D1 ERROR_CLUSTER_NODE_SHUTTING_DOWN |
The cluster node is shutting down. |
0x000013D2 ERROR_CLUSTER_JOIN_ABORTED |
The cluster join operation was aborted. |
0x000013D3 ERROR_CLUSTER_INCOMPATIBLE_VERSIONS |
The cluster join operation failed due to incompatible software versions between the joining node and its sponsor. |
0x000013D4 ERROR_CLUSTER_MAXNUM_OF_RESOURCES_EXCEEDED |
This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor. |
0x000013D5 ERROR_CLUSTER_SYSTEM_CONFIG_CHANGED |
The system configuration changed during the cluster join or form operation. The join or form operation was aborted. |
0x000013D6 ERROR_CLUSTER_RESOURCE_TYPE_NOT_FOUND |
The specified resource type was not found. |
0x000013D7 ERROR_CLUSTER_RESTYPE_NOT_SUPPORTED |
The specified node does not support a resource of this type. This might be due to version inconsistencies or due to the absence of the resource DLL on this node. |
0x000013D8 ERROR_CLUSTER_RESNAME_NOT_FOUND |
The specified resource name is not supported by this resource DLL. This might be due to a bad (or changed) name supplied to the resource DLL. |
0x000013D9 ERROR_CLUSTER_NO_RPC_PACKAGES_REGISTERED |
No authentication package could be registered with the RPC server. |
0x000013DA ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST |
You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group. |
0x000013DB ERROR_CLUSTER_DATABASE_SEQMISMATCH |
The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This can happen during a join operation if the cluster database was changing during the join. |
0x000013DC ERROR_RESMON_INVALID_STATE |
The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This can happen if the resource is in a pending state. |
0x000013DD ERROR_CLUSTER_GUM_NOT_LOCKER |
A non-locker code received a request to reserve the lock for making global updates. |
0x000013DE ERROR_QUORUM_DISK_NOT_FOUND |
The quorum disk could not be located by the cluster service. |
0x000013DF ERROR_DATABASE_BACKUP_CORRUPT |
The backed-up cluster database is possibly corrupt. |
0x000013E0 ERROR_CLUSTER_NODE_ALREADY_HAS_DFS_ROOT |
A DFS root already exists in this cluster node. |
0x000013E1 ERROR_RESOURCE_PROPERTY_UNCHANGEABLE |
An attempt to modify a resource property failed because it conflicts with another existing property. |
0x00001702 ERROR_CLUSTER_MEMBERSHIP_INVALID_STATE |
An operation was attempted that is incompatible with the current membership state of the node. |
0x00001703 ERROR_CLUSTER_QUORUMLOG_NOT_FOUND |
The quorum resource does not contain the quorum log. |
0x00001704 ERROR_CLUSTER_MEMBERSHIP_HALT |
The membership engine requested shutdown of the cluster service on this node. |
0x00001705 ERROR_CLUSTER_INSTANCE_ID_MISMATCH |
The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node. |
0x00001706 ERROR_CLUSTER_NETWORK_NOT_FOUND_FOR_IP |
A matching cluster network for the specified IP address could not be found. |
0x00001707 ERROR_CLUSTER_PROPERTY_DATA_TYPE_MISMATCH |
The actual data type of the property did not match the expected data type of the property. |
0x00001708 ERROR_CLUSTER_EVICT_WITHOUT_CLEANUP |
The cluster node was evicted from the cluster successfully, but the node was not cleaned up. To determine what clean-up steps failed and how to recover, see the Failover Clustering application event log using Event Viewer. |
0x00001709 ERROR_CLUSTER_PARAMETER_MISMATCH |
Two or more parameter values specified for a resource's properties are in conflict. |
0x0000170A ERROR_NODE_CANNOT_BE_CLUSTERED |
This computer cannot be made a member of a cluster. |
0x0000170B ERROR_CLUSTER_WRONG_OS_VERSION |
This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed. |
0x0000170C ERROR_CLUSTER_CANT_CREATE_DUP_CLUSTER_NAME |
A cluster cannot be created with the specified cluster name because that cluster name is already in use. Specify a different name for the cluster. |
0x0000170D ERROR_CLUSCFG_ALREADY_COMMITTED |
The cluster configuration action has already been committed. |
0x0000170E ERROR_CLUSCFG_ROLLBACK_FAILED |
The cluster configuration action could not be rolled back. |
0x0000170F ERROR_CLUSCFG_SYSTEM_DISK_DRIVE_LETTER_CONFLICT |
The drive letter assigned to a system disk on one node conflicted with the drive letter assigned to a disk on another node. |
0x00001710 ERROR_CLUSTER_OLD_VERSION |
One or more nodes in the cluster are running a version of Windows that does not support this operation. |
0x00001711 ERROR_CLUSTER_MISMATCHED_COMPUTER_ACCT_NAME |
The name of the corresponding computer account does not match the network name for this resource. |
0x00001712 ERROR_CLUSTER_NO_NET_ADAPTERS |
No network adapters are available. |
0x00001713 ERROR_CLUSTER_POISONED |
The cluster node has been poisoned. |
0x00001714 ERROR_CLUSTER_GROUP_MOVING |
The group is unable to accept the request because it is moving to another node. |
0x00001715 ERROR_CLUSTER_RESOURCE_TYPE_BUSY |
The resource type cannot accept the request because it is too busy performing another operation. |
0x00001716 ERROR_RESOURCE_CALL_TIMED_OUT |
The call to the cluster resource DLL timed out. |
0x00001717 ERROR_INVALID_CLUSTER_IPV6_ADDRESS |
The address is not valid for an IPv6 Address resource. A global IPv6 address is required, and it must match a cluster network. Compatibility addresses are not permitted. |
0x00001718 ERROR_CLUSTER_INTERNAL_INVALID_FUNCTION |
An internal cluster error occurred. A call to an invalid function was attempted. |
0x00001719 ERROR_CLUSTER_PARAMETER_OUT_OF_BOUNDS |
A parameter value is out of acceptable range. |
0x0000171A ERROR_CLUSTER_PARTIAL_SEND |
A network error occurred while sending data to another node in the cluster. The number of bytes transmitted was less than required. |
0x0000171B ERROR_CLUSTER_REGISTRY_INVALID_FUNCTION |
An invalid cluster registry operation was attempted. |
0x0000171C ERROR_CLUSTER_INVALID_STRING_TERMINATION |
An input string of characters is not properly terminated. |
0x0000171D ERROR_CLUSTER_INVALID_STRING_FORMAT |
An input string of characters is not in a valid format for the data it represents. |
0x0000171E ERROR_CLUSTER_DATABASE_TRANSACTION_IN_PROGRESS |
An internal cluster error occurred. A cluster database transaction was attempted while a transaction was already in progress. |
0x0000171F ERROR_CLUSTER_DATABASE_TRANSACTION_NOT_IN_PROGRESS |
An internal cluster error occurred. There was an attempt to commit a cluster database transaction while no transaction was in progress. |
0x00001720 ERROR_CLUSTER_NULL_DATA |
An internal cluster error occurred. Data was not properly initialized. |
0x00001721 ERROR_CLUSTER_PARTIAL_READ |
An error occurred while reading from a stream of data. An unexpected number of bytes was returned. |
0x00001722 ERROR_CLUSTER_PARTIAL_WRITE |
An error occurred while writing to a stream of data. The required number of bytes could not be written. |
0x00001723 ERROR_CLUSTER_CANT_DESERIALIZE_DATA |
An error occurred while deserializing a stream of cluster data. |
0x00001724 ERROR_DEPENDENT_RESOURCE_PROPERTY_CONFLICT |
One or more property values for this resource are in conflict with one or more property values associated with its dependent resources. |
0x00001725 ERROR_CLUSTER_NO_QUORUM |
A quorum of cluster nodes was not present to form a cluster. |
0x00001726 ERROR_CLUSTER_INVALID_IPV6_NETWORK |
The cluster network is not valid for an IPv6 address resource, or it does not match the configured address. |
0x00001727 ERROR_CLUSTER_INVALID_IPV6_TUNNEL_NETWORK |
The cluster network is not valid for an IPv6 tunnel resource. Check the configuration of the IP Address resource on which the IPv6 tunnel resource depends. |
0x00001728 ERROR_QUORUM_NOT_ALLOWED_IN_THIS_GROUP |
Quorum resource cannot reside in the available storage group. |
0x00001770 ERROR_ENCRYPTION_FAILED |
The specified file could not be encrypted. |
0x00001771 ERROR_DECRYPTION_FAILED |
The specified file could not be decrypted. |
0x00001772 ERROR_FILE_ENCRYPTED |
The specified file is encrypted and the user does not have the ability to decrypt it. |
0x00001773 ERROR_NO_RECOVERY_POLICY |
There is no valid encryption recovery policy configured for this system. |
0x00001774 ERROR_NO_EFS |
The required encryption driver is not loaded for this system. |
0x00001775 ERROR_WRONG_EFS |
The file was encrypted with a different encryption driver than is currently loaded. |
0x00001776 ERROR_NO_USER_KEYS |
There are no Encrypting File System (EFS) keys defined for the user. |
0x00001777 ERROR_FILE_NOT_ENCRYPTED |
The specified file is not encrypted. |
0x00001778 ERROR_NOT_EXPORT_FORMAT |
The specified file is not in the defined EFS export format. |
0x00001779 ERROR_FILE_READ_ONLY |
The specified file is read-only. |
0x0000177A ERROR_DIR_EFS_DISALLOWED |
The directory has been disabled for encryption. |
0x0000177B ERROR_EFS_SERVER_NOT_TRUSTED |
The server is not trusted for remote encryption operation. |
0x0000177C ERROR_BAD_RECOVERY_POLICY |
Recovery policy configured for this system contains invalid recovery certificate. |
0x0000177D ERROR_EFS_ALG_BLOB_TOO_BIG |
The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file. |
0x0000177E ERROR_VOLUME_NOT_SUPPORT_EFS |
The disk partition does not support file encryption. |
0x0000177F ERROR_EFS_DISABLED |
This machine is disabled for file encryption. |
0x00001780 ERROR_EFS_VERSION_NOT_SUPPORT |
A newer system is required to decrypt this encrypted file. |
0x00001781 ERROR_CS_ENCRYPTION_INVALID_SERVER_RESPONSE |
The remote server sent an invalid response for a file being opened with client-side encryption. |
0x00001782 ERROR_CS_ENCRYPTION_UNSUPPORTED_SERVER |
Client-side encryption is not supported by the remote server even though it claims to support it. |
0x00001783 ERROR_CS_ENCRYPTION_EXISTING_ENCRYPTED_FILE |
File is encrypted and should be opened in client-side encryption mode. |
0x00001784 ERROR_CS_ENCRYPTION_NEW_ENCRYPTED_FILE |
A new encrypted file is being created and a $EFS needs to be provided. |
0x00001785 ERROR_CS_ENCRYPTION_FILE_NOT_CSE |
The SMB client requested a client-side extension (CSE) file system control (FSCTL) on a non-CSE file. |
0x000017E6 ERROR_NO_BROWSER_SERVERS_FOUND |
The list of servers for this workgroup is not currently available |
0x00001838 SCHED_E_SERVICE_NOT_LOCALSYSTEM |
The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks can be configured to run in other accounts. |
0x000019C8 ERROR_LOG_SECTOR_INVALID |
The log service encountered an invalid log sector. |
0x000019C9 ERROR_LOG_SECTOR_PARITY_INVALID |
The log service encountered a log sector with invalid block parity. |
0x000019CA ERROR_LOG_SECTOR_REMAPPED |
The log service encountered a remapped log sector. |
0x000019CB ERROR_LOG_BLOCK_INCOMPLETE |
The log service encountered a partial or incomplete log block. |
0x000019CC ERROR_LOG_INVALID_RANGE |
The log service encountered an attempt to access data outside the active log range. |
0x000019CD ERROR_LOG_BLOCKS_EXHAUSTED |
The log service user marshaling buffers are exhausted. |
0x000019CE ERROR_LOG_READ_CONTEXT_INVALID |
The log service encountered an attempt to read from a marshaling area with an invalid read context. |
0x000019CF ERROR_LOG_RESTART_INVALID |
The log service encountered an invalid log restart area. |
0x000019D0 ERROR_LOG_BLOCK_VERSION |
The log service encountered an invalid log block version. |
0x000019D1 ERROR_LOG_BLOCK_INVALID |
The log service encountered an invalid log block. |
0x000019D2 ERROR_LOG_READ_MODE_INVALID |
The log service encountered an attempt to read the log with an invalid read mode. |
0x000019D3 ERROR_LOG_NO_RESTART |
The log service encountered a log stream with no restart area. |
0x000019D4 ERROR_LOG_METADATA_CORRUPT |
The log service encountered a corrupted metadata file. |
0x000019D5 ERROR_LOG_METADATA_INVALID |
The log service encountered a metadata file that could not be created by the log file system. |
0x000019D6 ERROR_LOG_METADATA_INCONSISTENT |
The log service encountered a metadata file with inconsistent data. |
0x000019D7 ERROR_LOG_RESERVATION_INVALID |
The log service encountered an attempt to erroneous allocate or dispose reservation space. |
0x000019D8 ERROR_LOG_CANT_DELETE |
The log service cannot delete a log file or file system container. |
0x000019D9 ERROR_LOG_CONTAINER_LIMIT_EXCEEDED |
The log service has reached the maximum allowable containers allocated to a log file. |
0x000019DA ERROR_LOG_START_OF_LOG |
The log service has attempted to read or write backward past the start of the log. |
0x000019DB ERROR_LOG_POLICY_ALREADY_INSTALLED |
The log policy could not be installed because a policy of the same type is already present. |
0x000019DC ERROR_LOG_POLICY_NOT_INSTALLED |
The log policy in question was not installed at the time of the request. |
0x000019DD ERROR_LOG_POLICY_INVALID |
The installed set of policies on the log is invalid. |
0x000019DE ERROR_LOG_POLICY_CONFLICT |
A policy on the log in question prevented the operation from completing. |
0x000019DF ERROR_LOG_PINNED_ARCHIVE_TAIL |
Log space cannot be reclaimed because the log is pinned by the archive tail. |
0x000019E0 ERROR_LOG_RECORD_NONEXISTENT |
The log record is not a record in the log file. |
0x000019E1 ERROR_LOG_RECORDS_RESERVED_INVALID |
The number of reserved log records or the adjustment of the number of reserved log records is invalid. |
0x000019E2 ERROR_LOG_SPACE_RESERVED_INVALID |
The reserved log space or the adjustment of the log space is invalid. |
0x000019E3 ERROR_LOG_TAIL_INVALID |
A new or existing archive tail or base of the active log is invalid. |
0x000019E4 ERROR_LOG_FULL |
The log space is exhausted. |
0x000019E5 ERROR_COULD_NOT_RESIZE_LOG |
The log could not be set to the requested size. |
0x000019E6 ERROR_LOG_MULTIPLEXED |
The log is multiplexed; no direct writes to the physical log are allowed. |
0x000019E7 ERROR_LOG_DEDICATED |
The operation failed because the log is a dedicated log. |
0x000019E8 ERROR_LOG_ARCHIVE_NOT_IN_PROGRESS |
The operation requires an archive context. |
0x000019E9 ERROR_LOG_ARCHIVE_IN_PROGRESS |
Log archival is in progress. |
0x000019EA ERROR_LOG_EPHEMERAL |
The operation requires a non-ephemeral log, but the log is ephemeral. |
0x000019EB ERROR_LOG_NOT_ENOUGH_CONTAINERS |
The log must have at least two containers before it can be read from or written to. |
0x000019EC ERROR_LOG_CLIENT_ALREADY_REGISTERED |
A log client has already registered on the stream. |
0x000019ED ERROR_LOG_CLIENT_NOT_REGISTERED |
A log client has not been registered on the stream. |
0x000019EE ERROR_LOG_FULL_HANDLER_IN_PROGRESS |
A request has already been made to handle the log full condition. |
0x000019EF ERROR_LOG_CONTAINER_READ_FAILED |
The log service encountered an error when attempting to read from a log container. |
0x000019F0 ERROR_LOG_CONTAINER_WRITE_FAILED |
The log service encountered an error when attempting to write to a log container. |
0x000019F1 ERROR_LOG_CONTAINER_OPEN_FAILED |
The log service encountered an error when attempting to open a log container. |
0x000019F2 ERROR_LOG_CONTAINER_STATE_INVALID |
The log service encountered an invalid container state when attempting a requested action. |
0x000019F3 ERROR_LOG_STATE_INVALID |
The log service is not in the correct state to perform a requested action. |
0x000019F4 ERROR_LOG_PINNED |
The log space cannot be reclaimed because the log is pinned. |
0x000019F5 ERROR_LOG_METADATA_FLUSH_FAILED |
The log metadata flush failed. |
0x000019F6 ERROR_LOG_INCONSISTENT_SECURITY |
Security on the log and its containers is inconsistent. |
0x000019F7 ERROR_LOG_APPENDED_FLUSH_FAILED |
Records were appended to the log or reservation changes were made, but the log could not be flushed. |
0x000019F8 ERROR_LOG_PINNED_RESERVATION |
The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available. |
0x00001A2C ERROR_INVALID_TRANSACTION |
The transaction handle associated with this operation is not valid. |
0x00001A2D ERROR_TRANSACTION_NOT_ACTIVE |
The requested operation was made in the context of a transaction that is no longer active. |
0x00001A2E ERROR_TRANSACTION_REQUEST_NOT_VALID |
The requested operation is not valid on the transaction object in its current state. |
0x00001A2F ERROR_TRANSACTION_NOT_REQUESTED |
The caller has called a response API, but the response is not expected because the transaction manager did not issue the corresponding request to the caller. |
0x00001A30 ERROR_TRANSACTION_ALREADY_ABORTED |
It is too late to perform the requested operation because the transaction has already been aborted. |
0x00001A31 ERROR_TRANSACTION_ALREADY_COMMITTED |
It is too late to perform the requested operation because the transaction has already been committed. |
0x00001A32 ERROR_TM_INITIALIZATION_FAILED |
The transaction manager was unable to be successfully initialized. Transacted operations are not supported. |
0x00001A33 ERROR_RESOURCEMANAGER_READ_ONLY |
The specified resource manager made no changes or updates to the resource under this transaction. |
0x00001A34 ERROR_TRANSACTION_NOT_JOINED |
The resource manager has attempted to prepare a transaction that it has not successfully joined. |
0x00001A35 ERROR_TRANSACTION_SUPERIOR_EXISTS |
The transaction object already has a superior enlistment, and the caller attempted an operation that would have created a new superior. Only a single superior enlistment is allowed. |
0x00001A36 ERROR_CRM_PROTOCOL_ALREADY_EXISTS |
The resource manager tried to register a protocol that already exists. |
0x00001A37 ERROR_TRANSACTION_PROPAGATION_FAILED |
The attempt to propagate the transaction failed. |
0x00001A38 ERROR_CRM_PROTOCOL_NOT_FOUND |
The requested propagation protocol was not registered as a CRM. |
0x00001A39 ERROR_TRANSACTION_INVALID_MARSHALL_BUFFER |
The buffer passed in to PushTransaction or PullTransaction is not in a valid format. |
0x00001A3A ERROR_CURRENT_TRANSACTION_NOT_VALID |
The current transaction context associated with the thread is not a valid handle to a transaction object. |
0x00001A3B ERROR_TRANSACTION_NOT_FOUND |
The specified transaction object could not be opened because it was not found. |
0x00001A3C ERROR_RESOURCEMANAGER_NOT_FOUND |
The specified resource manager object could not be opened because it was not found. |
0x00001A3D ERROR_ENLISTMENT_NOT_FOUND |
The specified enlistment object could not be opened because it was not found. |
0x00001A3E ERROR_TRANSACTIONMANAGER_NOT_FOUND |
The specified transaction manager object could not be opened because it was not found. |
0x00001A3F ERROR_TRANSACTIONMANAGER_NOT_ONLINE |
The specified resource manager was unable to create an enlistment because its associated transaction manager is not online. |
0x00001A40 ERROR_TRANSACTIONMANAGER_RECOVERY_NAME_COLLISION |
The specified transaction manager was unable to create the objects contained in its log file in the ObjectB namespace. Therefore, the transaction manager was unable to recover. |
0x00001A90 ERROR_TRANSACTIONAL_CONFLICT |
The function attempted to use a name that is reserved for use by another transaction. |
0x00001A91 ERROR_RM_NOT_ACTIVE |
Transaction support within the specified file system resource manager is not started or was shut down due to an error. |
0x00001A92 ERROR_RM_METADATA_CORRUPT |
The metadata of the resource manager has been corrupted. The resource manager will not function. |
0x00001A93 ERROR_DIRECTORY_NOT_RM |
The specified directory does not contain a resource manager. |
0x00001A95 ERROR_TRANSACTIONS_UNSUPPORTED_REMOTE |
The remote server or share does not support transacted file operations. |
0x00001A96 ERROR_LOG_RESIZE_INVALID_SIZE |
The requested log size is invalid. |
0x00001A97 ERROR_OBJECT_NO_LONGER_EXISTS |
The object (file, stream, link) corresponding to the handle has been deleted by a transaction savepoint rollback. |
0x00001A98 ERROR_STREAM_MINIVERSION_NOT_FOUND |
The specified file miniversion was not found for this transacted file open. |
0x00001A99 ERROR_STREAM_MINIVERSION_NOT_VALID |
The specified file miniversion was found but has been invalidated. The most likely cause is a transaction savepoint rollback. |
0x00001A9A ERROR_MINIVERSION_INACCESSIBLE_FROM_SPECIFIED_TRANSACTION |
A miniversion can only be opened in the context of the transaction that created it. |
0x00001A9B ERROR_CANT_OPEN_MINIVERSION_WITH_MODIFY_INTENT |
It is not possible to open a miniversion with modify access. |
0x00001A9C ERROR_CANT_CREATE_MORE_STREAM_MINIVERSIONS |
It is not possible to create any more miniversions for this stream. |
0x00001A9E ERROR_REMOTE_FILE_VERSION_MISMATCH |
The remote server sent mismatching version numbers or FID for a file opened with transactions. |
0x00001A9F ERROR_HANDLE_NO_LONGER_VALID |
The handle has been invalidated by a transaction. The most likely cause is the presence of memory mapping on a file, or an open handle when the transaction ended or rolled back to savepoint. |
0x00001AA0 ERROR_NO_TXF_METADATA |
There is no transaction metadata on the file. |
0x00001AA1 ERROR_LOG_CORRUPTION_DETECTED |
The log data is corrupt. |
0x00001AA2 ERROR_CANT_RECOVER_WITH_HANDLE_OPEN |
The file cannot be recovered because a handle is still open on it. |
0x00001AA3 ERROR_RM_DISCONNECTED |
The transaction outcome is unavailable because the resource manager responsible for it is disconnected. |
0x00001AA4 ERROR_ENLISTMENT_NOT_SUPERIOR |
The request was rejected because the enlistment in question is not a superior enlistment. |
0x00001AA5 ERROR_RECOVERY_NOT_NEEDED |
The transactional resource manager is already consistent. Recovery is not needed. |
0x00001AA6 ERROR_RM_ALREADY_STARTED |
The transactional resource manager has already been started. |
0x00001AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT |
The file cannot be opened in a transaction because its identity depends on the outcome of an unresolved transaction. |
0x00001AA8 ERROR_CANT_BREAK_TRANSACTIONAL_DEPENDENCY |
The operation cannot be performed because another transaction is depending on the fact that this property will not change. |
0x00001AA9 ERROR_CANT_CROSS_RM_BOUNDARY |
The operation would involve a single file with two transactional resource managers and is therefore not allowed. |
0x00001AAA ERROR_TXF_DIR_NOT_EMPTY |
The $Txf directory must be empty for this operation to succeed. |
0x00001AAB ERROR_INDOUBT_TRANSACTIONS_EXIST |
The operation would leave a transactional resource manager in an inconsistent state and is, therefore, not allowed. |
0x00001AAC ERROR_TM_VOLATILE |
The operation could not be completed because the transaction manager does not have a log. |
0x00001AAD ERROR_ROLLBACK_TIMER_EXPIRED |
A rollback could not be scheduled because a previously scheduled rollback has already been executed or is queued for execution. |
0x00001AAE ERROR_TXF_ATTRIBUTE_CORRUPT |
The transactional metadata attribute on the file or directory is corrupt and unreadable. |
0x00001AAF ERROR_EFS_NOT_ALLOWED_IN_TRANSACTION |
The encryption operation could not be completed because a transaction is active. |
0x00001AB0 ERROR_TRANSACTIONAL_OPEN_NOT_ALLOWED |
This object is not allowed to be opened in a transaction. |
0x00001AB1 ERROR_LOG_GROWTH_FAILED |
An attempt to create space in the transactional resource manager's log failed. The failure status has been recorded in the event log. |
0x00001AB2 ERROR_TRANSACTED_MAPPING_UNSUPPORTED_REMOTE |
Memory mapping (creating a mapped section) to a remote file under a transaction is not supported. |
0x00001AB3 ERROR_TXF_METADATA_ALREADY_PRESENT |
Transaction metadata is already present on this file and cannot be superseded. |
0x00001AB4 ERROR_TRANSACTION_SCOPE_CALLBACKS_NOT_SET |
A transaction scope could not be entered because the scope handler has not been initialized. |
0x00001AB5 ERROR_TRANSACTION_REQUIRED_PROMOTION |
Promotion was required to allow the resource manager to enlist, but the transaction was set to disallow it. |
0x00001AB6 ERROR_CANNOT_EXECUTE_FILE_IN_TRANSACTION |
This file is open for modification in an unresolved transaction and can be opened for execution only by a transacted reader. |
0x00001AB7 ERROR_TRANSACTIONS_NOT_FROZEN |
The request to thaw frozen transactions was ignored because transactions were not previously frozen. |
0x00001AB8 ERROR_TRANSACTION_FREEZE_IN_PROGRESS |
Transactions cannot be frozen because a freeze is already in progress. |
0x00001AB9 ERROR_NOT_SNAPSHOT_VOLUME |
The target volume is not a snapshot volume. This operation is only valid on a volume mounted as a snapshot. |
0x00001ABA ERROR_NO_SAVEPOINT_WITH_OPEN_FILES |
The savepoint operation failed because files are open on the transaction. This is not permitted. |
0x00001ABB ERROR_DATA_LOST_REPAIR |
Windows has discovered corruption in a file, and that file has since been repaired. Data loss might have occurred. |
0x00001ABC ERROR_SPARSE_NOT_ALLOWED_IN_TRANSACTION |
The sparse operation could not be completed because a transaction is active on the file. |
0x00001ABD ERROR_TM_IDENTITY_MISMATCH |
The call to create a transaction manager object failed because the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument. |
0x00001ABE ERROR_FLOATED_SECTION |
I/O was attempted on a section object that has been floated as a result of a transaction ending. There is no valid data. |
0x00001ABF ERROR_CANNOT_ACCEPT_TRANSACTED_WORK |
The transactional resource manager cannot currently accept transacted work due to a transient condition, such as low resources. |
0x00001AC0 ERROR_CANNOT_ABORT_TRANSACTIONS |
The transactional resource manager had too many transactions outstanding that could not be aborted. The transactional resource manager has been shut down. |
0x00001B59 ERROR_CTX_WINSTATION_NAME_INVALID |
The specified session name is invalid. |
0x00001B5A ERROR_CTX_INVALID_PD |
The specified protocol driver is invalid. |
0x00001B5B ERROR_CTX_PD_NOT_FOUND |
The specified protocol driver was not found in the system path. |
0x00001B5C ERROR_CTX_WD_NOT_FOUND |
The specified terminal connection driver was not found in the system path. |
0x00001B5D ERROR_CTX_CANNOT_MAKE_EVENTLOG_ENTRY |
A registry key for event logging could not be created for this session. |
0x00001B5E ERROR_CTX_SERVICE_NAME_COLLISION |
A service with the same name already exists on the system. |
0x00001B5F ERROR_CTX_CLOSE_PENDING |
A close operation is pending on the session. |
0x00001B60 ERROR_CTX_NO_OUTBUF |
There are no free output buffers available. |
0x00001B61 ERROR_CTX_MODEM_INF_NOT_FOUND |
The MODEM.INF file was not found. |
0x00001B62 ERROR_CTX_INVALID_MODEMNAME |
The modem name was not found in the MODEM.INF file. |
0x00001B63 ERROR_CTX_MODEM_RESPONSE_ERROR |
The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem. |
0x00001B64 ERROR_CTX_MODEM_RESPONSE_TIMEOUT |
The modem did not respond to the command sent to it. Verify that the modem is properly cabled and turned on. |
0x00001B65 ERROR_CTX_MODEM_RESPONSE_NO_CARRIER |
Carrier detect has failed or carrier has been dropped due to disconnect. |
0x00001B66 ERROR_CTX_MODEM_RESPONSE_NO_DIALTONE |
Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional. |
0x00001B67 ERROR_CTX_MODEM_RESPONSE_BUSY |
Busy signal detected at remote site on callback. |
0x00001B68 ERROR_CTX_MODEM_RESPONSE_VOICE |
Voice detected at remote site on callback. |
0x00001B69 ERROR_CTX_TD_ERROR |
Transport driver error. |
0x00001B6E ERROR_CTX_WINSTATION_NOT_FOUND |
The specified session cannot be found. |
0x00001B6F ERROR_CTX_WINSTATION_ALREADY_EXISTS |
The specified session name is already in use. |
0x00001B70 ERROR_CTX_WINSTATION_BUSY |
The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation. |
0x00001B71 ERROR_CTX_BAD_VIDEO_MODE |
An attempt has been made to connect to a session whose video mode is not supported by the current client. |
0x00001B7B ERROR_CTX_GRAPHICS_INVALID |
The application attempted to enable DOS graphics mode. DOS graphics mode is not supported. |
0x00001B7D ERROR_CTX_LOGON_DISABLED |
Your interactive logon privilege has been disabled. Contact your administrator. |
0x00001B7E ERROR_CTX_NOT_CONSOLE |
The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access. |
0x00001B80 ERROR_CTX_CLIENT_QUERY_TIMEOUT |
The client failed to respond to the server connect message. |
0x00001B81 ERROR_CTX_CONSOLE_DISCONNECT |
Disconnecting the console session is not supported. |
0x00001B82 ERROR_CTX_CONSOLE_CONNECT |
Reconnecting a disconnected session to the console is not supported. |
0x00001B84 ERROR_CTX_SHADOW_DENIED |
The request to control another session remotely was denied. |
0x00001B85 ERROR_CTX_WINSTATION_ACCESS_DENIED |
The requested session access is denied. |
0x00001B89 ERROR_CTX_INVALID_WD |
The specified terminal connection driver is invalid. |
0x00001B8A ERROR_CTX_SHADOW_INVALID |
The requested session cannot be controlled remotely. This might be because the session is disconnected or does not currently have a user logged on. |
0x00001B8B ERROR_CTX_SHADOW_DISABLED |
The requested session is not configured to allow remote control. |
0x00001B8C ERROR_CTX_CLIENT_LICENSE_IN_USE |
Your request to connect to this terminal server has been rejected. Your terminal server client license number is currently being used by another user. Call your system administrator to obtain a unique license number. |
0x00001B8D ERROR_CTX_CLIENT_LICENSE_NOT_SET |
Your request to connect to this terminal server has been rejected. Your terminal server client license number has not been entered for this copy of the terminal server client. Contact your system administrator. |
0x00001B8E ERROR_CTX_LICENSE_NOT_AVAILABLE |
The number of connections to this computer is limited and all connections are in use right now. Try connecting later or contact your system administrator. |
0x00001B8F ERROR_CTX_LICENSE_CLIENT_INVALID |
The client you are using is not licensed to use this system. Your logon request is denied. |
0x00001B90 ERROR_CTX_LICENSE_EXPIRED |
The system license has expired. Your logon request is denied. |
0x00001B91 ERROR_CTX_SHADOW_NOT_RUNNING |
Remote control could not be terminated because the specified session is not currently being remotely controlled. |
0x00001B92 ERROR_CTX_SHADOW_ENDED_BY_MODE_CHANGE |
The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported. |
0x00001B93 ERROR_ACTIVATION_COUNT_EXCEEDED |
Activation has already been reset the maximum number of times for this installation. Your activation timer will not be cleared. |
0x00001B94 ERROR_CTX_WINSTATIONS_DISABLED |
Remote logons are currently disabled. |
0x00001B95 ERROR_CTX_ENCRYPTION_LEVEL_REQUIRED |
You do not have the proper encryption level to access this session. |
0x00001B96 ERROR_CTX_SESSION_IN_USE |
The user %s\\%s is currently logged on to this computer. Only the current user or an administrator can log on to this computer. |
0x00001B97 ERROR_CTX_NO_FORCE_LOGOFF |
The user %s\\%s is already logged on to the console of this computer. You do not have permission to log in at this time. To resolve this issue, contact %s\\%s and have them log off. |
0x00001B98 ERROR_CTX_ACCOUNT_RESTRICTION |
Unable to log you on because of an account restriction. |
0x00001B99 ERROR_RDP_PROTOCOL_ERROR |
The RDP component %2 detected an error in the protocol stream and has disconnected the client. |
0x00001B9A ERROR_CTX_CDM_CONNECT |
The Client Drive Mapping Service has connected on terminal connection. |
0x00001B9B ERROR_CTX_CDM_DISCONNECT |
The Client Drive Mapping Service has disconnected on terminal connection. |
0x00001B9C ERROR_CTX_SECURITY_LAYER_ERROR |
The terminal server security layer detected an error in the protocol stream and has disconnected the client. |
0x00001B9D ERROR_TS_INCOMPATIBLE_SESSIONS |
The target session is incompatible with the current session. |
0x00001F41 FRS_ERR_INVALID_API_SEQUENCE |
The file replication service API was called incorrectly. |
0x00001F42 FRS_ERR_STARTING_SERVICE |
The file replication service cannot be started. |
0x00001F43 FRS_ERR_STOPPING_SERVICE |
The file replication service cannot be stopped. |
0x00001F44 FRS_ERR_INTERNAL_API |
The file replication service API terminated the request. The event log might contain more information. |
0x00001F45 FRS_ERR_INTERNAL |
The file replication service terminated the request. The event log might contain more information. |
0x00001F46 FRS_ERR_SERVICE_COMM |
The file replication service cannot be contacted. The event log might contain more information. |
0x00001F47 FRS_ERR_INSUFFICIENT_PRIV |
The file replication service cannot satisfy the request because the user has insufficient privileges. The event log might contain more information. |
0x00001F48 FRS_ERR_AUTHENTICATION |
The file replication service cannot satisfy the request because authenticated RPC is not available. The event log might contain more information. |
0x00001F49 FRS_ERR_PARENT_INSUFFICIENT_PRIV |
The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The event log might contain more information. |
0x00001F4A FRS_ERR_PARENT_AUTHENTICATION |
The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The event log might contain more information. |
0x00001F4B FRS_ERR_CHILD_TO_PARENT_COMM |
The file replication service cannot communicate with the file replication service on the domain controller. The event log might contain more information. |
0x00001F4C FRS_ERR_PARENT_TO_CHILD_COMM |
The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log might contain more information. |
0x00001F4D FRS_ERR_SYSVOL_POPULATE |
The file replication service cannot populate the system volume because of an internal error. The event log might contain more information. |
0x00001F4E FRS_ERR_SYSVOL_POPULATE_TIMEOUT |
The file replication service cannot populate the system volume because of an internal time-out. The event log might contain more information. |
0x00001F4F FRS_ERR_SYSVOL_IS_BUSY |
The file replication service cannot process the request. The system volume is busy with a previous request. |
0x00001F50 FRS_ERR_SYSVOL_DEMOTE |
The file replication service cannot stop replicating the system volume because of an internal error. The event log might contain more information. |
0x00001F51 FRS_ERR_INVALID_SERVICE_PARAMETER |
The file replication service detected an invalid parameter. |
0x00002008 ERROR_DS_NOT_INSTALLED |
An error occurred while installing the directory service. For more information, see the event log. |
0x00002009 ERROR_DS_MEMBERSHIP_EVALUATED_LOCALLY |
The directory service evaluated group memberships locally. |
0x0000200A ERROR_DS_NO_ATTRIBUTE_OR_VALUE |
The specified directory service attribute or value does not exist. |
0x0000200B ERROR_DS_INVALID_ATTRIBUTE_SYNTAX |
The attribute syntax specified to the directory service is invalid. |
0x0000200C ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED |
The attribute type specified to the directory service is not defined. |
0x0000200D ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS |
The specified directory service attribute or value already exists. |
0x0000200E ERROR_DS_BUSY |
The directory service is busy. |
0x0000200F ERROR_DS_UNAVAILABLE |
The directory service is unavailable. |
0x00002010 ERROR_DS_NO_RIDS_ALLOCATED |
The directory service was unable to allocate a relative identifier. |
0x00002011 ERROR_DS_NO_MORE_RIDS |
The directory service has exhausted the pool of relative identifiers. |
0x00002012 ERROR_DS_INCORRECT_ROLE_OWNER |
The requested operation could not be performed because the directory service is not the master for that type of operation. |
0x00002013 ERROR_DS_RIDMGR_INIT_ERROR |
The directory service was unable to initialize the subsystem that allocates relative identifiers. |
0x00002014 ERROR_DS_OBJ_CLASS_VIOLATION |
The requested operation did not satisfy one or more constraints associated with the class of the object. |
0x00002015 ERROR_DS_CANT_ON_NON_LEAF |
The directory service can perform the requested operation only on a leaf object. |
0x00002016 ERROR_DS_CANT_ON_RDN |
The directory service cannot perform the requested operation on the relative distinguished name (RDN) attribute of an object. |
0x00002017 ERROR_DS_CANT_MOD_OBJ_CLASS |
The directory service detected an attempt to modify the object class of an object. |
0x00002018 ERROR_DS_CROSS_DOM_MOVE_ERROR |
The requested cross-domain move operation could not be performed. |
0x00002019 ERROR_DS_GC_NOT_AVAILABLE |
Unable to contact the global catalog (GC) server. |
0x0000201A ERROR_SHARED_POLICY |
The policy object is shared and can only be modified at the root. |
0x0000201B ERROR_POLICY_OBJECT_NOT_FOUND |
The policy object does not exist. |
0x0000201C ERROR_POLICY_ONLY_IN_DS |
The requested policy information is only in the directory service. |
0x0000201D ERROR_PROMOTION_ACTIVE |
A domain controller promotion is currently active. |
0x0000201E ERROR_NO_PROMOTION_ACTIVE |
A domain controller promotion is not currently active. |
0x00002020 ERROR_DS_OPERATIONS_ERROR |
An operations error occurred. |
0x00002021 ERROR_DS_PROTOCOL_ERROR |
A protocol error occurred. |
0x00002022 ERROR_DS_TIMELIMIT_EXCEEDED |
The time limit for this request was exceeded. |
0x00002023 ERROR_DS_SIZELIMIT_EXCEEDED |
The size limit for this request was exceeded. |
0x00002024 ERROR_DS_ADMIN_LIMIT_EXCEEDED |
The administrative limit for this request was exceeded. |
0x00002025 ERROR_DS_COMPARE_FALSE |
The compare response was false. |
0x00002026 ERROR_DS_COMPARE_TRUE |
The compare response was true. |
0x00002027 ERROR_DS_AUTH_METHOD_NOT_SUPPORTED |
The requested authentication method is not supported by the server. |
0x00002028 ERROR_DS_STRONG_AUTH_REQUIRED |
A more secure authentication method is required for this server. |
0x00002029 ERROR_DS_INAPPROPRIATE_AUTH |
Inappropriate authentication. |
0x0000202A ERROR_DS_AUTH_UNKNOWN |
The authentication mechanism is unknown. |
0x0000202B ERROR_DS_REFERRAL |
A referral was returned from the server. |
0x0000202C ERROR_DS_UNAVAILABLE_CRIT_EXTENSION |
The server does not support the requested critical extension. |
0x0000202D ERROR_DS_CONFIDENTIALITY_REQUIRED |
This request requires a secure connection. |
0x0000202E ERROR_DS_INAPPROPRIATE_MATCHING |
Inappropriate matching. |
0x0000202F ERROR_DS_CONSTRAINT_VIOLATION |
A constraint violation occurred. |
0x00002030 ERROR_DS_NO_SUCH_OBJECT |
There is no such object on the server. |
0x00002031 ERROR_DS_ALIAS_PROBLEM |
There is an alias problem. |
0x00002032 ERROR_DS_INVALID_DN_SYNTAX |
An invalid dn syntax has been specified. |
0x00002033 ERROR_DS_IS_LEAF |
The object is a leaf object. |
0x00002034 ERROR_DS_ALIAS_DEREF_PROBLEM |
There is an alias dereferencing problem. |
0x00002035 ERROR_DS_UNWILLING_TO_PERFORM |
The server is unwilling to process the request. |
0x00002036 ERROR_DS_LOOP_DETECT |
A loop has been detected. |
0x00002037 ERROR_DS_NAMING_VIOLATION |
There is a naming violation. |
0x00002038 ERROR_DS_OBJECT_RESULTS_TOO_LARGE |
The result set is too large. |
0x00002039 ERROR_DS_AFFECTS_MULTIPLE_DSAS |
The operation affects multiple DSAs. |
0x0000203A ERROR_DS_SERVER_DOWN |
The server is not operational. |
0x0000203B ERROR_DS_LOCAL_ERROR |
A local error has occurred. |
0x0000203C ERROR_DS_ENCODING_ERROR |
An encoding error has occurred. |
0x0000203D ERROR_DS_DECODING_ERROR |
A decoding error has occurred. |
0x0000203E ERROR_DS_FILTER_UNKNOWN |
The search filter cannot be recognized. |
0x0000203F ERROR_DS_PARAM_ERROR |
One or more parameters are illegal. |
0x00002040 ERROR_DS_NOT_SUPPORTED |
The specified method is not supported. |
0x00002041 ERROR_DS_NO_RESULTS_RETURNED |
No results were returned. |
0x00002042 ERROR_DS_CONTROL_NOT_FOUND |
The specified control is not supported by the server. |
0x00002043 ERROR_DS_CLIENT_LOOP |
A referral loop was detected by the client. |
0x00002044 ERROR_DS_REFERRAL_LIMIT_EXCEEDED |
The preset referral limit was exceeded. |
0x00002045 ERROR_DS_SORT_CONTROL_MISSING |
The search requires a SORT control. |
0x00002046 ERROR_DS_OFFSET_RANGE_ERROR |
The search results exceed the offset range specified. |
0x0000206D ERROR_DS_ROOT_MUST_BE_NC |
The root object must be the head of a naming context. The root object cannot have an instantiated parent. |
0x0000206E ERROR_DS_ADD_REPLICA_INHIBITED |
The add replica operation cannot be performed. The naming context must be writable to create the replica. |
0x0000206F ERROR_DS_ATT_NOT_DEF_IN_SCHEMA |
A reference to an attribute that is not defined in the schema occurred. |
0x00002070 ERROR_DS_MAX_OBJ_SIZE_EXCEEDED |
The maximum size of an object has been exceeded. |
0x00002071 ERROR_DS_OBJ_STRING_NAME_EXISTS |
An attempt was made to add an object to the directory with a name that is already in use. |
0x00002072 ERROR_DS_NO_RDN_DEFINED_IN_SCHEMA |
An attempt was made to add an object of a class that does not have an RDN defined in the schema. |
0x00002073 ERROR_DS_RDN_DOESNT_MATCH_SCHEMA |
An attempt was made to add an object using an RDN that is not the RDN defined in the schema. |
0x00002074 ERROR_DS_NO_REQUESTED_ATTS_FOUND |
None of the requested attributes were found on the objects. |
0x00002075 ERROR_DS_USER_BUFFER_TO_SMALL |
The user buffer is too small. |
0x00002076 ERROR_DS_ATT_IS_NOT_ON_OBJ |
The attribute specified in the operation is not present on the object. |
0x00002077 ERROR_DS_ILLEGAL_MOD_OPERATION |
Illegal modify operation. Some aspect of the modification is not permitted. |
0x00002078 ERROR_DS_OBJ_TOO_LARGE |
The specified object is too large. |
0x00002079 ERROR_DS_BAD_INSTANCE_TYPE |
The specified instance type is not valid. |
0x0000207A ERROR_DS_MASTERDSA_REQUIRED |
The operation must be performed at a master DSA. |
0x0000207B ERROR_DS_OBJECT_CLASS_REQUIRED |
The object class attribute must be specified. |
0x0000207C ERROR_DS_MISSING_REQUIRED_ATT |
A required attribute is missing. |
0x0000207D ERROR_DS_ATT_NOT_DEF_FOR_CLASS |
An attempt was made to modify an object to include an attribute that is not legal for its class. |
0x0000207E ERROR_DS_ATT_ALREADY_EXISTS |
The specified attribute is already present on the object. |
0x00002080 ERROR_DS_CANT_ADD_ATT_VALUES |
The specified attribute is not present, or has no values. |
0x00002081 ERROR_DS_SINGLE_VALUE_CONSTRAINT |
Multiple values were specified for an attribute that can have only one value. |
0x00002082 ERROR_DS_RANGE_CONSTRAINT |
A value for the attribute was not in the acceptable range of values. |
0x00002083 ERROR_DS_ATT_VAL_ALREADY_EXISTS |
The specified value already exists. |
0x00002084 ERROR_DS_CANT_REM_MISSING_ATT |
The attribute cannot be removed because it is not present on the object. |
0x00002085 ERROR_DS_CANT_REM_MISSING_ATT_VAL |
The attribute value cannot be removed because it is not present on the object. |
0x00002086 ERROR_DS_ROOT_CANT_BE_SUBREF |
The specified root object cannot be a subreference. |
0x00002087 ERROR_DS_NO_CHAINING |
Chaining is not permitted. |
0x00002088 ERROR_DS_NO_CHAINED_EVAL |
Chained evaluation is not permitted. |
0x00002089 ERROR_DS_NO_PARENT_OBJECT |
The operation could not be performed because the object's parent is either uninstantiated or deleted. |
0x0000208A ERROR_DS_PARENT_IS_AN_ALIAS |
Having a parent that is an alias is not permitted. Aliases are leaf objects. |
0x0000208B ERROR_DS_CANT_MIX_MASTER_AND_REPS |
The object and parent must be of the same type, either both masters or both replicas. |
0x0000208C ERROR_DS_CHILDREN_EXIST |
The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object. |
0x0000208D ERROR_DS_OBJ_NOT_FOUND |
Directory object not found. |
0x0000208E ERROR_DS_ALIASED_OBJ_MISSING |
The aliased object is missing. |
0x0000208F ERROR_DS_BAD_NAME_SYNTAX |
The object name has bad syntax. |
0x00002090 ERROR_DS_ALIAS_POINTS_TO_ALIAS |
An alias is not permitted to refer to another alias. |
0x00002091 ERROR_DS_CANT_DEREF_ALIAS |
The alias cannot be dereferenced. |
0x00002092 ERROR_DS_OUT_OF_SCOPE |
The operation is out of scope. |
0x00002093 ERROR_DS_OBJECT_BEING_REMOVED |
The operation cannot continue because the object is in the process of being removed. |
0x00002094 ERROR_DS_CANT_DELETE_DSA_OBJ |
The DSA object cannot be deleted. |
0x00002095 ERROR_DS_GENERIC_ERROR |
A directory service error has occurred. |
0x00002096 ERROR_DS_DSA_MUST_BE_INT_MASTER |
The operation can only be performed on an internal master DSA object. |
0x00002097 ERROR_DS_CLASS_NOT_DSA |
The object must be of class DSA. |
0x00002098 ERROR_DS_INSUFF_ACCESS_RIGHTS |
Insufficient access rights to perform the operation. |
0x00002099 ERROR_DS_ILLEGAL_SUPERIOR |
The object cannot be added because the parent is not on the list of possible superiors. |
0x0000209A ERROR_DS_ATTRIBUTE_OWNED_BY_SAM |
Access to the attribute is not permitted because the attribute is owned by the SAM. |
0x0000209B ERROR_DS_NAME_TOO_MANY_PARTS |
The name has too many parts. |
0x0000209C ERROR_DS_NAME_TOO_LONG |
The name is too long. |
0x0000209D ERROR_DS_NAME_VALUE_TOO_LONG |
The name value is too long. |
0x0000209E ERROR_DS_NAME_UNPARSEABLE |
The directory service encountered an error parsing a name. |
0x0000209F ERROR_DS_NAME_TYPE_UNKNOWN |
The directory service cannot get the attribute type for a name. |
0x000020A0 ERROR_DS_NOT_AN_OBJECT |
The name does not identify an object; the name identifies a phantom. |
0x000020A1 ERROR_DS_SEC_DESC_TOO_SHORT |
The security descriptor is too short. |
0x000020A2 ERROR_DS_SEC_DESC_INVALID |
The security descriptor is invalid. |
0x000020A3 ERROR_DS_NO_DELETED_NAME |
Failed to create name for deleted object. |
0x000020A4 ERROR_DS_SUBREF_MUST_HAVE_PARENT |
The parent of a new subreference must exist. |
0x000020A5 ERROR_DS_NCNAME_MUST_BE_NC |
The object must be a naming context. |
0x000020A6 ERROR_DS_CANT_ADD_SYSTEM_ONLY |
It is not permitted to add an attribute that is owned by the system. |
0x000020A7 ERROR_DS_CLASS_MUST_BE_CONCRETE |
The class of the object must be structural; you cannot instantiate an abstract class. |
0x000020A8 ERROR_DS_INVALID_DMD |
The schema object could not be found. |
0x000020A9 ERROR_DS_OBJ_GUID_EXISTS |
A local object with this GUID (dead or alive) already exists. |
0x000020AA ERROR_DS_NOT_ON_BACKLINK |
The operation cannot be performed on a back link. |
0x000020AB ERROR_DS_NO_CROSSREF_FOR_NC |
The cross-reference for the specified naming context could not be found. |
0x000020AC ERROR_DS_SHUTTING_DOWN |
The operation could not be performed because the directory service is shutting down. |
0x000020AD ERROR_DS_UNKNOWN_OPERATION |
The directory service request is invalid. |
0x000020AE ERROR_DS_INVALID_ROLE_OWNER |
The role owner attribute could not be read. |
0x000020AF ERROR_DS_COULDNT_CONTACT_FSMO |
The requested Flexible Single Master Operations (FSMO) operation failed. The current FSMO holder could not be contacted. |
0x000020B0 ERROR_DS_CROSS_NC_DN_RENAME |
Modification of a distinguished name across a naming context is not permitted. |
0x000020B1 ERROR_DS_CANT_MOD_SYSTEM_ONLY |
The attribute cannot be modified because it is owned by the system. |
0x000020B2 ERROR_DS_REPLICATOR_ONLY |
Only the replicator can perform this function. |
0x000020B3 ERROR_DS_OBJ_CLASS_NOT_DEFINED |
The specified class is not defined. |
0x000020B4 ERROR_DS_OBJ_CLASS_NOT_SUBCLASS |
The specified class is not a subclass. |
0x000020B5 ERROR_DS_NAME_REFERENCE_INVALID |
The name reference is invalid. |
0x000020B6 ERROR_DS_CROSS_REF_EXISTS |
A cross-reference already exists. |
0x000020B7 ERROR_DS_CANT_DEL_MASTER_CROSSREF |
It is not permitted to delete a master cross-reference. |
0x000020B8 ERROR_DS_SUBTREE_NOTIFY_NOT_NC_HEAD |
Subtree notifications are only supported on naming context (NC) heads. |
0x000020B9 ERROR_DS_NOTIFY_FILTER_TOO_COMPLEX |
Notification filter is too complex. |
0x000020BA ERROR_DS_DUP_RDN |
Schema update failed: Duplicate RDN. |
0x000020BB ERROR_DS_DUP_OID |
Schema update failed: Duplicate OID. |
0x000020BC ERROR_DS_DUP_MAPI_ID |
Schema update failed: Duplicate Message Application Programming Interface (MAPI) identifier. |
0x000020BD ERROR_DS_DUP_SCHEMA_ID_GUID |
Schema update failed: Duplicate schema ID GUID. |
0x000020BE ERROR_DS_DUP_LDAP_DISPLAY_NAME |
Schema update failed: Duplicate LDAP display name. |
0x000020BF ERROR_DS_SEMANTIC_ATT_TEST |
Schema update failed: Range-Lower less than Range-Upper. |
0x000020C0 ERROR_DS_SYNTAX_MISMATCH |
Schema update failed: Syntax mismatch. |
0x000020C1 ERROR_DS_EXISTS_IN_MUST_HAVE |
Schema deletion failed: Attribute is used in the Must-Contain list. |
0x000020C2 ERROR_DS_EXISTS_IN_MAY_HAVE |
Schema deletion failed: Attribute is used in the May-Contain list. |
0x000020C3 ERROR_DS_NONEXISTENT_MAY_HAVE |
Schema update failed: Attribute in May-Contain list does not exist. |
0x000020C4 ERROR_DS_NONEXISTENT_MUST_HAVE |
Schema update failed: Attribute in the Must-Contain list does not exist. |
0x000020C5 ERROR_DS_AUX_CLS_TEST_FAIL |
Schema update failed: Class in the Aux Class list does not exist or is not an auxiliary class. |
0x000020C6 ERROR_DS_NONEXISTENT_POSS_SUP |
Schema update failed: Class in the Poss-Superiors list does not exist. |
0x000020C7 ERROR_DS_SUB_CLS_TEST_FAIL |
Schema update failed: Class in the subclass of the list does not exist or does not satisfy hierarchy rules. |
0x000020C8 ERROR_DS_BAD_RDN_ATT_ID_SYNTAX |
Schema update failed: Rdn-Att-Id has wrong syntax. |
0x000020C9 ERROR_DS_EXISTS_IN_AUX_CLS |
Schema deletion failed: Class is used as an auxiliary class. |
0x000020CA ERROR_DS_EXISTS_IN_SUB_CLS |
Schema deletion failed: Class is used as a subclass. |
0x000020CB ERROR_DS_EXISTS_IN_POSS_SUP |
Schema deletion failed: Class is used as a Poss-Superior. |
0x000020CC ERROR_DS_RECALCSCHEMA_FAILED |
Schema update failed in recalculating validation cache. |
0x000020CD ERROR_DS_TREE_DELETE_NOT_FINISHED |
The tree deletion is not finished. The request must be made again to continue deleting the tree. |
0x000020CE ERROR_DS_CANT_DELETE |
The requested delete operation could not be performed. |
0x000020CF ERROR_DS_ATT_SCHEMA_REQ_ID |
Cannot read the governs class identifier for the schema record. |
0x000020D0 ERROR_DS_BAD_ATT_SCHEMA_SYNTAX |
The attribute schema has bad syntax. |
0x000020D1 ERROR_DS_CANT_CACHE_ATT |
The attribute could not be cached. |
0x000020D2 ERROR_DS_CANT_CACHE_CLASS |
The class could not be cached. |
0x000020D3 ERROR_DS_CANT_REMOVE_ATT_CACHE |
The attribute could not be removed from the cache. |
0x000020D4 ERROR_DS_CANT_REMOVE_CLASS_CACHE |
The class could not be removed from the cache. |
0x000020D5 ERROR_DS_CANT_RETRIEVE_DN |
The distinguished name attribute could not be read. |
0x000020D6 ERROR_DS_MISSING_SUPREF |
No superior reference has been configured for the directory service. The directory service is, therefore, unable to issue referrals to objects outside this forest. |
0x000020D7 ERROR_DS_CANT_RETRIEVE_INSTANCE |
The instance type attribute could not be retrieved. |
0x000020D8 ERROR_DS_CODE_INCONSISTENCY |
An internal error has occurred. |
0x000020D9 ERROR_DS_DATABASE_ERROR |
A database error has occurred. |
0x000020DA ERROR_DS_GOVERNSID_MISSING |
The governsID attribute is missing. |
0x000020DB ERROR_DS_MISSING_EXPECTED_ATT |
An expected attribute is missing. |
0x000020DC ERROR_DS_NCNAME_MISSING_CR_REF |
The specified naming context is missing a cross-reference. |
0x000020DD ERROR_DS_SECURITY_CHECKING_ERROR |
A security checking error has occurred. |
0x000020DE ERROR_DS_SCHEMA_NOT_LOADED |
The schema is not loaded. |
0x000020DF ERROR_DS_SCHEMA_ALLOC_FAILED |
Schema allocation failed. Check if the machine is running low on memory. |
0x000020E0 ERROR_DS_ATT_SCHEMA_REQ_SYNTAX |
Failed to obtain the required syntax for the attribute schema. |
0x000020E1 ERROR_DS_GCVERIFY_ERROR |
The GC verification failed. The GC is not available or does not support the operation. Some part of the directory is currently not available. |
0x000020E2 ERROR_DS_DRA_SCHEMA_MISMATCH |
The replication operation failed because of a schema mismatch between the servers involved. |
0x000020E3 ERROR_DS_CANT_FIND_DSA_OBJ |
The DSA object could not be found. |
0x000020E4 ERROR_DS_CANT_FIND_EXPECTED_NC |
The naming context could not be found. |
0x000020E5 ERROR_DS_CANT_FIND_NC_IN_CACHE |
The naming context could not be found in the cache. |
0x000020E6 ERROR_DS_CANT_RETRIEVE_CHILD |
The child object could not be retrieved. |
0x000020E7 ERROR_DS_SECURITY_ILLEGAL_MODIFY |
The modification was not permitted for security reasons. |
0x000020E8 ERROR_DS_CANT_REPLACE_HIDDEN_REC |
The operation cannot replace the hidden record. |
0x000020E9 ERROR_DS_BAD_HIERARCHY_FILE |
The hierarchy file is invalid. |
0x000020EA ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED |
The attempt to build the hierarchy table failed. |
0x000020EB ERROR_DS_CONFIG_PARAM_MISSING |
The directory configuration parameter is missing from the registry. |
0x000020EC ERROR_DS_COUNTING_AB_INDICES_FAILED |
The attempt to count the address book indices failed. |
0x000020ED ERROR_DS_HIERARCHY_TABLE_MALLOC_FAILED |
The allocation of the hierarchy table failed. |
0x000020EE ERROR_DS_INTERNAL_FAILURE |
The directory service encountered an internal failure. |
0x000020EF ERROR_DS_UNKNOWN_ERROR |
The directory service encountered an unknown failure. |
0x000020F0 ERROR_DS_ROOT_REQUIRES_CLASS_TOP |
A root object requires a class of "top". |
0x000020F1 ERROR_DS_REFUSING_FSMO_ROLES |
This directory server is shutting down, and cannot take ownership of new floating single-master operation roles. |
0x000020F2 ERROR_DS_MISSING_FSMO_SETTINGS |
The directory service is missing mandatory configuration information and is unable to determine the ownership of floating single-master operation roles. |
0x000020F3 ERROR_DS_UNABLE_TO_SURRENDER_ROLES |
The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers. |
0x000020F4 ERROR_DS_DRA_GENERIC |
The replication operation failed. |
0x000020F5 ERROR_DS_DRA_INVALID_PARAMETER |
An invalid parameter was specified for this replication operation. |
0x000020F6 ERROR_DS_DRA_BUSY |
The directory service is too busy to complete the replication operation at this time. |
0x000020F7 ERROR_DS_DRA_BAD_DN |
The DN specified for this replication operation is invalid. |
0x000020F8 ERROR_DS_DRA_BAD_NC |
The naming context specified for this replication operation is invalid. |
0x000020F9 ERROR_DS_DRA_DN_EXISTS |
The DN specified for this replication operation already exists. |
0x000020FA ERROR_DS_DRA_INTERNAL_ERROR |
The replication system encountered an internal error. |
0x000020FB ERROR_DS_DRA_INCONSISTENT_DIT |
The replication operation encountered a database inconsistency. |
0x000020FC ERROR_DS_DRA_CONNECTION_FAILED |
The server specified for this replication operation could not be contacted. |
0x000020FD ERROR_DS_DRA_BAD_INSTANCE_TYPE |
The replication operation encountered an object with an invalid instance type. |
0x000020FE ERROR_DS_DRA_OUT_OF_MEM |
The replication operation failed to allocate memory. |
0x000020FF ERROR_DS_DRA_MAIL_PROBLEM |
The replication operation encountered an error with the mail system. |
0x00002100 ERROR_DS_DRA_REF_ALREADY_EXISTS |
The replication reference information for the target server already exists. |
0x00002101 ERROR_DS_DRA_REF_NOT_FOUND |
The replication reference information for the target server does not exist. |
0x00002102 ERROR_DS_DRA_OBJ_IS_REP_SOURCE |
The naming context cannot be removed because it is replicated to another server. |
0x00002103 ERROR_DS_DRA_DB_ERROR |
The replication operation encountered a database error. |
0x00002104 ERROR_DS_DRA_NO_REPLICA |
The naming context is in the process of being removed or is not replicated from the specified server. |
0x00002105 ERROR_DS_DRA_ACCESS_DENIED |
Replication access was denied. |
0x00002106 ERROR_DS_DRA_NOT_SUPPORTED |
The requested operation is not supported by this version of the directory service. |
0x00002107 ERROR_DS_DRA_RPC_CANCELLED |
The replication RPC was canceled. |
0x00002108 ERROR_DS_DRA_SOURCE_DISABLED |
The source server is currently rejecting replication requests. |
0x00002109 ERROR_DS_DRA_SINK_DISABLED |
The destination server is currently rejecting replication requests. |
0x0000210A ERROR_DS_DRA_NAME_COLLISION |
The replication operation failed due to a collision of object names. |
0x0000210B ERROR_DS_DRA_SOURCE_REINSTALLED |
The replication source has been reinstalled. |
0x0000210C ERROR_DS_DRA_MISSING_PARENT |
The replication operation failed because a required parent object is missing. |
0x0000210D ERROR_DS_DRA_PREEMPTED |
The replication operation was preempted. |
0x0000210E ERROR_DS_DRA_ABANDON_SYNC |
The replication synchronization attempt was abandoned because of a lack of updates. |
0x0000210F ERROR_DS_DRA_SHUTDOWN |
The replication operation was terminated because the system is shutting down. |
0x00002110 ERROR_DS_DRA_INCOMPATIBLE_PARTIAL_SET |
A synchronization attempt failed because the destination DC is currently waiting to synchronize new partial attributes from the source. This condition is normal if a recent schema change modified the partial attribute set. The destination partial attribute set is not a subset of the source partial attribute set. |
0x00002111 ERROR_DS_DRA_SOURCE_IS_PARTIAL_REPLICA |
The replication synchronization attempt failed because a master replica attempted to sync from a partial replica. |
0x00002112 ERROR_DS_DRA_EXTN_CONNECTION_FAILED |
The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation. |
0x00002113 ERROR_DS_INSTALL_SCHEMA_MISMATCH |
The version of the directory service schema of the source forest is not compatible with the version of the directory service on this computer. |
0x00002114 ERROR_DS_DUP_LINK_ID |
Schema update failed: An attribute with the same link identifier already exists. |
0x00002115 ERROR_DS_NAME_ERROR_RESOLVING |
Name translation: Generic processing error. |
0x00002116 ERROR_DS_NAME_ERROR_NOT_FOUND |
Name translation: Could not find the name or insufficient right to see name. |
0x00002117 ERROR_DS_NAME_ERROR_NOT_UNIQUE |
Name translation: Input name mapped to more than one output name. |
0x00002118 ERROR_DS_NAME_ERROR_NO_MAPPING |
Name translation: The input name was found but not the associated output format. |
0x00002119 ERROR_DS_NAME_ERROR_DOMAIN_ONLY |
Name translation: Unable to resolve completely, only the domain was found. |
0x0000211A ERROR_DS_NAME_ERROR_NO_SYNTACTICAL_MAPPING |
Name translation: Unable to perform purely syntactical mapping at the client without going out to the wire. |
0x0000211B ERROR_DS_CONSTRUCTED_ATT_MOD |
Modification of a constructed attribute is not allowed. |
0x0000211C ERROR_DS_WRONG_OM_OBJ_CLASS |
The OM-Object-Class specified is incorrect for an attribute with the specified syntax. |
0x0000211D ERROR_DS_DRA_REPL_PENDING |
The replication request has been posted; waiting for a reply. |
0x0000211E ERROR_DS_DS_REQUIRED |
The requested operation requires a directory service, and none was available. |
0x0000211F ERROR_DS_INVALID_LDAP_DISPLAY_NAME |
The LDAP display name of the class or attribute contains non-ASCII characters. |
0x00002120 ERROR_DS_NON_BASE_SEARCH |
The requested search operation is only supported for base searches. |
0x00002121 ERROR_DS_CANT_RETRIEVE_ATTS |
The search failed to retrieve attributes from the database. |
0x00002122 ERROR_DS_BACKLINK_WITHOUT_LINK |
The schema update operation tried to add a backward link attribute that has no corresponding forward link. |
0x00002123 ERROR_DS_EPOCH_MISMATCH |
The source and destination of a cross-domain move do not agree on the object's epoch number. Either the source or the destination does not have the latest version of the object. |
0x00002124 ERROR_DS_SRC_NAME_MISMATCH |
The source and destination of a cross-domain move do not agree on the object's current name. Either the source or the destination does not have the latest version of the object. |
0x00002125 ERROR_DS_SRC_AND_DST_NC_IDENTICAL |
The source and destination for the cross-domain move operation are identical. The caller should use a local move operation instead of a cross-domain move operation. |
0x00002126 ERROR_DS_DST_NC_MISMATCH |
The source and destination for a cross-domain move do not agree on the naming contexts in the forest. Either the source or the destination does not have the latest version of the Partitions container. |
0x00002127 ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC |
The destination of a cross-domain move is not authoritative for the destination naming context. |
0x00002128 ERROR_DS_SRC_GUID_MISMATCH |
The source and destination of a cross-domain move do not agree on the identity of the source object. Either the source or the destination does not have the latest version of the source object. |
0x00002129 ERROR_DS_CANT_MOVE_DELETED_OBJECT |
The object being moved across domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object. |
0x0000212A ERROR_DS_PDC_OPERATION_IN_PROGRESS |
Another operation that requires exclusive access to the PDC FSMO is already in progress. |
0x0000212B ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD |
A cross-domain move operation failed because two versions of the moved object exist—one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state. |
0x0000212C ERROR_DS_ILLEGAL_XDOM_MOVE_OPERATION |
This object cannot be moved across domain boundaries either because cross-domain moves for this class are not allowed, or the object has some special characteristics, for example, a trust account or a restricted relative identifier (RID), that prevent its move. |
0x0000212D ERROR_DS_CANT_WITH_ACCT_GROUP_MEMBERSHPS |
Cannot move objects with memberships across domain boundaries because, once moved, this violates the membership conditions of the account group. Remove the object from any account group memberships and retry. |
0x0000212E ERROR_DS_NC_MUST_HAVE_NC_PARENT |
A naming context head must be the immediate child of another naming context head, not of an interior node. |
0x0000212F ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE |
The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Ensure that the domain naming master role is held by a server that is configured as a GC server, and that the server is up-to-date with its replication partners. (Applies only to Windows 2000 operating system domain naming masters.) |
0x00002130 ERROR_DS_DST_DOMAIN_NOT_NATIVE |
Destination domain must be in native mode. |
0x00002131 ERROR_DS_MISSING_INFRASTRUCTURE_CONTAINER |
The operation cannot be performed because the server does not have an infrastructure container in the domain of interest. |
0x00002132 ERROR_DS_CANT_MOVE_ACCOUNT_GROUP |
Cross-domain moves of nonempty account groups is not allowed. |
0x00002133 ERROR_DS_CANT_MOVE_RESOURCE_GROUP |
Cross-domain moves of nonempty resource groups is not allowed. |
0x00002134 ERROR_DS_INVALID_SEARCH_FLAG |
The search flags for the attribute are invalid. The ambiguous name resolution (ANR) bit is valid only on attributes of Unicode or Teletex strings. |
0x00002135 ERROR_DS_NO_TREE_DELETE_ABOVE_NC |
Tree deletions starting at an object that has an NC head as a descendant are not allowed. |
0x00002136 ERROR_DS_COULDNT_LOCK_TREE_FOR_DELETE |
The directory service failed to lock a tree in preparation for a tree deletion because the tree was in use. |
0x00002137 ERROR_DS_COULDNT_IDENTIFY_OBJECTS_FOR_TREE_DELETE |
The directory service failed to identify the list of objects to delete while attempting a tree deletion. |
0x00002138 ERROR_DS_SAM_INIT_FAILURE |
SAM initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Directory Services Restore Mode. Check the event log for detailed information. |
0x00002139 ERROR_DS_SENSITIVE_GROUP_VIOLATION |
Only an administrator can modify the membership list of an administrative group. |
0x0000213A ERROR_DS_CANT_MOD_PRIMARYGROUPID |
Cannot change the primary group ID of a domain controller account. |
0x0000213B ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD |
An attempt was made to modify the base schema. |
0x0000213C ERROR_DS_NONSAFE_SCHEMA_CHANGE |
Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed. |
0x0000213D ERROR_DS_SCHEMA_UPDATE_DISALLOWED |
Schema update is not allowed on this DC because the DC is not the schema FSMO role owner. |
0x0000213E ERROR_DS_CANT_CREATE_UNDER_SCHEMA |
An object of this class cannot be created under the schema container. You can only create Attribute-Schema and Class-Schema objects under the schema container. |
0x0000213F ERROR_DS_INSTALL_NO_SRC_SCH_VERSION |
The replica or child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it. |
0x00002140 ERROR_DS_INSTALL_NO_SCH_VERSION_IN_INIFILE |
The replica or child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the System32 directory. |
0x00002141 ERROR_DS_INVALID_GROUP_TYPE |
The specified group type is invalid. |
0x00002142 ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN |
You cannot nest global groups in a mixed domain if the group is security-enabled. |
0x00002143 ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN |
You cannot nest local groups in a mixed domain if the group is security-enabled. |
0x00002144 ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER |
A global group cannot have a local group as a member. |
0x00002145 ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER |
A global group cannot have a universal group as a member. |
0x00002146 ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER |
A universal group cannot have a local group as a member. |
0x00002147 ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER |
A global group cannot have a cross-domain member. |
0x00002148 ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER |
A local group cannot have another cross domain local group as a member. |
0x00002149 ERROR_DS_HAVE_PRIMARY_MEMBERS |
A group with primary members cannot change to a security-disabled group. |
0x0000214A ERROR_DS_STRING_SD_CONVERSION_FAILED |
The schema cache load failed to convert the string default security descriptor (SD) on a class-schema object. |
0x0000214B ERROR_DS_NAMING_MASTER_GC |
Only DSAs configured to be GC servers should be allowed to hold the domain naming master FSMO role. (Applies only to Windows 2000 servers.) |
0x0000214C ERROR_DS_DNS_LOOKUP_FAILURE |
The DSA operation is unable to proceed because of a DNS lookup failure. |
0x0000214D ERROR_DS_COULDNT_UPDATE_SPNS |
While processing a change to the DNS host name for an object, the SPN values could not be kept in sync. |
0x0000214E ERROR_DS_CANT_RETRIEVE_SD |
The Security Descriptor attribute could not be read. |
0x0000214F ERROR_DS_KEY_NOT_UNIQUE |
The object requested was not found, but an object with that key was found. |
0x00002150 ERROR_DS_WRONG_LINKED_ATT_SYNTAX |
The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1. |
0x00002151 ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD |
SAM needs to get the boot password. |
0x00002152 ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY |
SAM needs to get the boot key from the floppy disk. |
0x00002153 ERROR_DS_CANT_START |
Directory Service cannot start. |
0x00002154 ERROR_DS_INIT_FAILURE |
Directory Services could not start. |
0x00002155 ERROR_DS_NO_PKT_PRIVACY_ON_CONNECTION |
The connection between client and server requires packet privacy or better. |
0x00002156 ERROR_DS_SOURCE_DOMAIN_IN_FOREST |
The source domain cannot be in the same forest as the destination. |
0x00002157 ERROR_DS_DESTINATION_DOMAIN_NOT_IN_FOREST |
The destination domain MUST be in the forest. |
0x00002158 ERROR_DS_DESTINATION_AUDITING_NOT_ENABLED |
The operation requires that destination domain auditing be enabled. |
0x00002159 ERROR_DS_CANT_FIND_DC_FOR_SRC_DOMAIN |
The operation could not locate a DC for the source domain. |
0x0000215A ERROR_DS_SRC_OBJ_NOT_GROUP_OR_USER |
The source object must be a group or user. |
0x0000215B ERROR_DS_SRC_SID_EXISTS_IN_FOREST |
The source object's SID already exists in the destination forest. |
0x0000215C ERROR_DS_SRC_AND_DST_OBJECT_CLASS_MISMATCH |
The source and destination object must be of the same type. |
0x0000215D ERROR_SAM_INIT_FAILURE |
SAM initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system and reboot into Safe Mode. Check the event log for detailed information. |
0x0000215E ERROR_DS_DRA_SCHEMA_INFO_SHIP |
Schema information could not be included in the replication request. |
0x0000215F ERROR_DS_DRA_SCHEMA_CONFLICT |
The replication operation could not be completed due to a schema incompatibility. |
0x00002160 ERROR_DS_DRA_EARLIER_SCHEMA_CONFLICT |
The replication operation could not be completed due to a previous schema incompatibility. |
0x00002161 ERROR_DS_DRA_OBJ_NC_MISMATCH |
The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation. |
0x00002162 ERROR_DS_NC_STILL_HAS_DSAS |
The requested domain could not be deleted because there exist domain controllers that still host this domain. |
0x00002163 ERROR_DS_GC_REQUIRED |
The requested operation can be performed only on a GC server. |
0x00002164 ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY |
A local group can only be a member of other local groups in the same domain. |
0x00002165 ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS |
Foreign security principals cannot be members of universal groups. |
0x00002166 ERROR_DS_CANT_ADD_TO_GC |
The attribute is not allowed to be replicated to the GC because of security reasons. |
0x00002167 ERROR_DS_NO_CHECKPOINT_WITH_PDC |
The checkpoint with the PDC could not be taken because too many modifications are currently being processed. |
0x00002168 ERROR_DS_SOURCE_AUDITING_NOT_ENABLED |
The operation requires that source domain auditing be enabled. |
0x00002169 ERROR_DS_CANT_CREATE_IN_NONDOMAIN_NC |
Security principal objects can only be created inside domain naming contexts. |
0x0000216A ERROR_DS_INVALID_NAME_FOR_SPN |
An SPN could not be constructed because the provided host name is not in the necessary format. |
0x0000216B ERROR_DS_FILTER_USES_CONTRUCTED_ATTRS |
A filter was passed that uses constructed attributes. |
0x0000216C ERROR_DS_UNICODEPWD_NOT_IN_QUOTES |
The unicodePwd attribute value must be enclosed in quotation marks. |
0x0000216D ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED |
Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased. |
0x0000216E ERROR_DS_MUST_BE_RUN_ON_DST_DC |
For security reasons, the operation must be run on the destination DC. |
0x0000216F ERROR_DS_SRC_DC_MUST_BE_SP4_OR_GREATER |
For security reasons, the source DC must be NT4SP4 or greater. |
0x00002170 ERROR_DS_CANT_TREE_DELETE_CRITICAL_OBJ |
Critical directory service system objects cannot be deleted during tree deletion operations. The tree deletion might have been partially performed. |
0x00002171 ERROR_DS_INIT_FAILURE_CONSOLE |
Directory Services could not start because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system. You can use the Recovery Console to further diagnose the system. |
0x00002172 ERROR_DS_SAM_INIT_FAILURE_CONSOLE |
SAM initialization failed because of the following error: %1. Error Status: 0x%2. Click OK to shut down the system. You can use the Recovery Console to further diagnose the system. |
0x00002173 ERROR_DS_FOREST_VERSION_TOO_HIGH |
The version of the operating system installed is incompatible with the current forest functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this forest. |
0x00002174 ERROR_DS_DOMAIN_VERSION_TOO_HIGH |
The version of the operating system installed is incompatible with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this domain. |
0x00002175 ERROR_DS_FOREST_VERSION_TOO_LOW |
The version of the operating system installed on this server no longer supports the current forest functional level. You must raise the forest functional level before this server can become a domain controller in this forest. |
0x00002176 ERROR_DS_DOMAIN_VERSION_TOO_LOW |
The version of the operating system installed on this server no longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain controller in this domain. |
0x00002177 ERROR_DS_INCOMPATIBLE_VERSION |
The version of the operating system installed on this server is incompatible with the functional level of the domain or forest. |
0x00002178 ERROR_DS_LOW_DSA_VERSION |
The functional level of the domain (or forest) cannot be raised to the requested value because one or more domain controllers in the domain (or forest) are at a lower, incompatible functional level. |
0x00002179 ERROR_DS_NO_BEHAVIOR_VERSION_IN_MIXEDDOMAIN |
The forest functional level cannot be raised to the requested value because one or more domains are still in mixed-domain mode. All domains in the forest must be in native mode for you to raise the forest functional level. |
0x0000217A ERROR_DS_NOT_SUPPORTED_SORT_ORDER |
The sort order requested is not supported. |
0x0000217B ERROR_DS_NAME_NOT_UNIQUE |
The requested name already exists as a unique identifier. |
0x0000217C ERROR_DS_MACHINE_ACCOUNT_CREATED_PRENT4 |
The machine account was created before Windows NT 4.0. The account needs to be re-created. |
0x0000217D ERROR_DS_OUT_OF_VERSION_STORE |
The database is out of version store. |
0x0000217E ERROR_DS_INCOMPATIBLE_CONTROLS_USED |
Unable to continue operation because multiple conflicting controls were used. |
0x0000217F ERROR_DS_NO_REF_DOMAIN |
Unable to find a valid security descriptor reference domain for this partition. |
0x00002180 ERROR_DS_RESERVED_LINK_ID |
Schema update failed: The link identifier is reserved. |
0x00002181 ERROR_DS_LINK_ID_NOT_AVAILABLE |
Schema update failed: There are no link identifiers available. |
0x00002182 ERROR_DS_AG_CANT_HAVE_UNIVERSAL_MEMBER |
An account group cannot have a universal group as a member. |
0x00002183 ERROR_DS_MODIFYDN_DISALLOWED_BY_INSTANCE_TYPE |
Rename or move operations on naming context heads or read-only objects are not allowed. |
0x00002184 ERROR_DS_NO_OBJECT_MOVE_IN_SCHEMA_NC |
Move operations on objects in the schema naming context are not allowed. |
0x00002185 ERROR_DS_MODIFYDN_DISALLOWED_BY_FLAG |
A system flag has been set on the object that does not allow the object to be moved or renamed. |
0x00002186 ERROR_DS_MODIFYDN_WRONG_GRANDPARENT |
This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers. |
0x00002187 ERROR_DS_NAME_ERROR_TRUST_REFERRAL |
Unable to resolve completely; a referral to another forest was generated. |
0x00002188 ERROR_NOT_SUPPORTED_ON_STANDARD_SERVER |
The requested action is not supported on a standard server. |
0x00002189 ERROR_DS_CANT_ACCESS_REMOTE_PART_OF_AD |
Could not access a partition of the directory service located on a remote server. Make sure at least one server is running for the partition in question. |
0x0000218A ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE_V2 |
The directory cannot validate the proposed naming context (or partition) name because it does not hold a replica, nor can it contact a replica of the naming context above the proposed naming context. Ensure that the parent naming context is properly registered in the DNS, and at least one replica of this naming context is reachable by the domain naming master. |
0x0000218B ERROR_DS_THREAD_LIMIT_EXCEEDED |
The thread limit for this request was exceeded. |
0x0000218C ERROR_DS_NOT_CLOSEST |
The GC server is not in the closest site. |
0x0000218D ERROR_DS_CANT_DERIVE_SPN_WITHOUT_SERVER_REF |
The directory service cannot derive an SPN with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute. |
0x0000218E ERROR_DS_SINGLE_USER_MODE_FAILED |
The directory service failed to enter single-user mode. |
0x0000218F ERROR_DS_NTDSCRIPT_SYNTAX_ERROR |
The directory service cannot parse the script because of a syntax error. |
0x00002190 ERROR_DS_NTDSCRIPT_PROCESS_ERROR |
The directory service cannot process the script because of an error. |
0x00002191 ERROR_DS_DIFFERENT_REPL_EPOCHS |
The directory service cannot perform the requested operation because the servers involved are of different replication epochs (which is usually related to a domain rename that is in progress). |
0x00002192 ERROR_DS_DRS_EXTENSIONS_CHANGED |
The directory service binding must be renegotiated due to a change in the server extensions information. |
0x00002193 ERROR_DS_REPLICA_SET_CHANGE_NOT_ALLOWED_ON_DISABLED_CR |
The operation is not allowed on a disabled cross-reference. |
0x00002194 ERROR_DS_NO_MSDS_INTID |
Schema update failed: No values for msDS-IntId are available. |
0x00002195 ERROR_DS_DUP_MSDS_INTID |
Schema update failed: Duplicate msDS-IntId. Retry the operation. |
0x00002196 ERROR_DS_EXISTS_IN_RDNATTID |
Schema deletion failed: Attribute is used in rDNAttID. |
0x00002197 ERROR_DS_AUTHORIZATION_FAILED |
The directory service failed to authorize the request. |
0x00002198 ERROR_DS_INVALID_SCRIPT |
The directory service cannot process the script because it is invalid. |
0x00002199 ERROR_DS_REMOTE_CROSSREF_OP_FAILED |
The remote create cross-reference operation failed on the domain naming master FSMO. The operation's error is in the extended data. |
0x0000219A ERROR_DS_CROSS_REF_BUSY |
A cross-reference is in use locally with the same name. |
0x0000219B ERROR_DS_CANT_DERIVE_SPN_FOR_DELETED_DOMAIN |
The directory service cannot derive an SPN with which to mutually authenticate the target server because the server's domain has been deleted from the forest. |
0x0000219C ERROR_DS_CANT_DEMOTE_WITH_WRITEABLE_NC |
Writable NCs prevent this DC from demoting. |
0x0000219D ERROR_DS_DUPLICATE_ID_FOUND |
The requested object has a nonunique identifier and cannot be retrieved. |
0x0000219E ERROR_DS_INSUFFICIENT_ATTR_TO_CREATE_OBJECT |
Insufficient attributes were given to create an object. This object might not exist because it might have been deleted and the garbage already collected. |
0x0000219F ERROR_DS_GROUP_CONVERSION_ERROR |
The group cannot be converted due to attribute restrictions on the requested group type. |
0x000021A0 ERROR_DS_CANT_MOVE_APP_BASIC_GROUP |
Cross-domain moves of nonempty basic application groups is not allowed. |
0x000021A1 ERROR_DS_CANT_MOVE_APP_QUERY_GROUP |
Cross-domain moves of nonempty query-based application groups is not allowed. |
0x000021A2 ERROR_DS_ROLE_NOT_VERIFIED |
The FSMO role ownership could not be verified because its directory partition did not replicate successfully with at least one replication partner. |
0x000021A3 ERROR_DS_WKO_CONTAINER_CANNOT_BE_SPECIAL |
The target container for a redirection of a well-known object container cannot already be a special container. |
0x000021A4 ERROR_DS_DOMAIN_RENAME_IN_PROGRESS |
The directory service cannot perform the requested operation because a domain rename operation is in progress. |
0x000021A5 ERROR_DS_EXISTING_AD_CHILD_NC |
The directory service detected a child partition below the requested partition name. The partition hierarchy must be created in a top down method. |
0x000021A6 ERROR_DS_REPL_LIFETIME_EXCEEDED |
The directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime. |
0x000021A7 ERROR_DS_DISALLOWED_IN_SYSTEM_CONTAINER |
The requested operation is not allowed on an object under the system container. |
0x000021A8 ERROR_DS_LDAP_SEND_QUEUE_FULL |
The LDAP server's network send queue has filled up because the client is not processing the results of its requests fast enough. No more requests will be processed until the client catches up. If the client does not catch up then it will be disconnected. |
0x000021A9 ERROR_DS_DRA_OUT_SCHEDULE_WINDOW |
The scheduled replication did not take place because the system was too busy to execute the request within the schedule window. The replication queue is overloaded. Consider reducing the number of partners or decreasing the scheduled replication frequency. |
0x000021AA ERROR_DS_POLICY_NOT_KNOWN |
At this time, it cannot be determined if the branch replication policy is available on the hub domain controller. Retry at a later time to account for replication latencies. |
0x000021AB ERROR_NO_SITE_SETTINGS_OBJECT |
The site settings object for the specified site does not exist. |
0x000021AC ERROR_NO_SECRETS |
The local account store does not contain secret material for the specified account. |
0x000021AD ERROR_NO_WRITABLE_DC_FOUND |
Could not find a writable domain controller in the domain. |
0x000021AE ERROR_DS_NO_SERVER_OBJECT |
The server object for the domain controller does not exist. |
0x000021AF ERROR_DS_NO_NTDSA_OBJECT |
The NTDS Settings object for the domain controller does not exist. |
0x000021B0 ERROR_DS_NON_ASQ_SEARCH |
The requested search operation is not supported for attribute scoped query (ASQ) searches. |
0x000021B1 ERROR_DS_AUDIT_FAILURE |
A required audit event could not be generated for the operation. |
0x000021B2 ERROR_DS_INVALID_SEARCH_FLAG_SUBTREE |
The search flags for the attribute are invalid. The subtree index bit is valid only on single-valued attributes. |
0x000021B3 ERROR_DS_INVALID_SEARCH_FLAG_TUPLE |
The search flags for the attribute are invalid. The tuple index bit is valid only on attributes of Unicode strings. |
0x000021BF ERROR_DS_DRA_RECYCLED_TARGET |
The replication operation failed because the target object referenced by a link value is recycled. |
0x000021C2 ERROR_DS_HIGH_DSA_VERSION |
The functional level of the domain (or forest) cannot be lowered to the requested value. |
0x000021C7 ERROR_DS_SPN_VALUE_NOT_UNIQUE_IN_FOREST |
The operation failed because the SPN value provided for addition/modification is not unique forest-wide. |
0x000021C8 ERROR_DS_UPN_VALUE_NOT_UNIQUE_IN_FOREST |
The operation failed because the UPN value provided for addition/modification is not unique forest-wide. |
0x00002329 DNS_ERROR_RCODE_FORMAT_ERROR |
DNS server unable to interpret format. |
0x0000232A DNS_ERROR_RCODE_SERVER_FAILURE |
DNS server failure. |
0x0000232B DNS_ERROR_RCODE_NAME_ERROR |
DNS name does not exist. |
0x0000232C DNS_ERROR_RCODE_NOT_IMPLEMENTED |
DNS request not supported by name server. |
0x0000232D DNS_ERROR_RCODE_REFUSED |
DNS operation refused. |
0x0000232E DNS_ERROR_RCODE_YXDOMAIN |
DNS name that should not exist, does exist. |
0x0000232F DNS_ERROR_RCODE_YXRRSET |
DNS resource record (RR) set that should not exist, does exist. |
0x00002330 DNS_ERROR_RCODE_NXRRSET |
DNS RR set that should to exist, does not exist. |
0x00002331 DNS_ERROR_RCODE_NOTAUTH |
DNS server not authoritative for zone. |
0x00002332 DNS_ERROR_RCODE_NOTZONE |
DNS name in update or prereq is not in zone. |
0x00002338 DNS_ERROR_RCODE_BADSIG |
DNS signature failed to verify. |
0x00002339 DNS_ERROR_RCODE_BADKEY |
DNS bad key. |
0x0000233A DNS_ERROR_RCODE_BADTIME |
DNS signature validity expired. |
0x0000251D DNS_INFO_NO_RECORDS |
No records found for given DNS query. |
0x0000251E DNS_ERROR_BAD_PACKET |
Bad DNS packet. |
0x0000251F DNS_ERROR_NO_PACKET |
No DNS packet. |
0x00002520 DNS_ERROR_RCODE |
DNS error, check rcode. |
0x00002521 DNS_ERROR_UNSECURE_PACKET |
Unsecured DNS packet. |
0x0000254F DNS_ERROR_INVALID_TYPE |
Invalid DNS type. |
0x00002550 DNS_ERROR_INVALID_IP_ADDRESS |
Invalid IP address. |
0x00002551 DNS_ERROR_INVALID_PROPERTY |
Invalid property. |
0x00002552 DNS_ERROR_TRY_AGAIN_LATER |
Try DNS operation again later. |
0x00002553 DNS_ERROR_NOT_UNIQUE |
Record for given name and type is not unique. |
0x00002554 DNS_ERROR_NON_RFC_NAME |
DNS name does not comply with RFC specifications. |
0x00002555 DNS_STATUS_FQDN |
DNS name is a fully qualified DNS name. |
0x00002556 DNS_STATUS_DOTTED_NAME |
DNS name is dotted (multilabel). |
0x00002557 DNS_STATUS_SINGLE_PART_NAME |
DNS name is a single-part name. |
0x00002558 DNS_ERROR_INVALID_NAME_CHAR |
DNS name contains an invalid character. |
0x00002559 DNS_ERROR_NUMERIC_NAME |
DNS name is entirely numeric. |
0x0000255A DNS_ERROR_NOT_ALLOWED_ON_ROOT_SERVER |
The operation requested is not permitted on a DNS root server. |
0x0000255B DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION |
The record could not be created because this part of the DNS namespace has been delegated to another server. |
0x0000255C DNS_ERROR_CANNOT_FIND_ROOT_HINTS |
The DNS server could not find a set of root hints. |
0x0000255D DNS_ERROR_INCONSISTENT_ROOT_HINTS |
The DNS server found root hints but they were not consistent across all adapters. |
0x0000255E DNS_ERROR_DWORD_VALUE_TOO_SMALL |
The specified value is too small for this parameter. |
0x0000255F DNS_ERROR_DWORD_VALUE_TOO_LARGE |
The specified value is too large for this parameter. |
0x00002560 DNS_ERROR_BACKGROUND_LOADING |
This operation is not allowed while the DNS server is loading zones in the background. Try again later. |
0x00002561 DNS_ERROR_NOT_ALLOWED_ON_RODC |
The operation requested is not permitted on against a DNS server running on a read-only DC. |
0x00002581 DNS_ERROR_ZONE_DOES_NOT_EXIST |
DNS zone does not exist. |
0x00002582 DNS_ERROR_NO_ZONE_INFO |
DNS zone information not available. |
0x00002583 DNS_ERROR_INVALID_ZONE_OPERATION |
Invalid operation for DNS zone. |
0x00002584 DNS_ERROR_ZONE_CONFIGURATION_ERROR |
Invalid DNS zone configuration. |
0x00002585 DNS_ERROR_ZONE_HAS_NO_SOA_RECORD |
DNS zone has no start of authority (SOA) record. |
0x00002586 DNS_ERROR_ZONE_HAS_NO_NS_RECORDS |
DNS zone has no Name Server (NS) record. |
0x00002587 DNS_ERROR_ZONE_LOCKED |
DNS zone is locked. |
0x00002588 DNS_ERROR_ZONE_CREATION_FAILED |
DNS zone creation failed. |
0x00002589 DNS_ERROR_ZONE_ALREADY_EXISTS |
DNS zone already exists. |
0x0000258A DNS_ERROR_AUTOZONE_ALREADY_EXISTS |
DNS automatic zone already exists. |
0x0000258B DNS_ERROR_INVALID_ZONE_TYPE |
Invalid DNS zone type. |
0x0000258C DNS_ERROR_SECONDARY_REQUIRES_MASTER_IP |
Secondary DNS zone requires master IP address. |
0x0000258D DNS_ERROR_ZONE_NOT_SECONDARY |
DNS zone not secondary. |
0x0000258E DNS_ERROR_NEED_SECONDARY_ADDRESSES |
Need secondary IP address. |
0x0000258F DNS_ERROR_WINS_INIT_FAILED |
WINS initialization failed. |
0x00002590 DNS_ERROR_NEED_WINS_SERVERS |
Need WINS servers. |
0x00002591 DNS_ERROR_NBSTAT_INIT_FAILED |
NBTSTAT initialization call failed. |
0x00002592 DNS_ERROR_SOA_DELETE_INVALID |
Invalid delete of SOA. |
0x00002593 DNS_ERROR_FORWARDER_ALREADY_EXISTS |
A conditional forwarding zone already exists for that name. |
0x00002594 DNS_ERROR_ZONE_REQUIRES_MASTER_IP |
This zone must be configured with one or more master DNS server IP addresses. |
0x00002595 DNS_ERROR_ZONE_IS_SHUTDOWN |
The operation cannot be performed because this zone is shut down. |
0x000025B3 DNS_ERROR_PRIMARY_REQUIRES_DATAFILE |
The primary DNS zone requires a data file. |
0x000025B4 DNS_ERROR_INVALID_DATAFILE_NAME |
Invalid data file name for the DNS zone. |
0x000025B5 DNS_ERROR_DATAFILE_OPEN_FAILURE |
Failed to open the data file for the DNS zone. |
0x000025B6 DNS_ERROR_FILE_WRITEBACK_FAILED |
Failed to write the data file for the DNS zone. |
0x000025B7 DNS_ERROR_DATAFILE_PARSING |
Failure while reading datafile for DNS zone. |
0x000025E5 DNS_ERROR_RECORD_DOES_NOT_EXIST |
DNS record does not exist. |
0x000025E6 DNS_ERROR_RECORD_FORMAT |
DNS record format error. |
0x000025E7 DNS_ERROR_NODE_CREATION_FAILED |
Node creation failure in DNS. |
0x000025E8 DNS_ERROR_UNKNOWN_RECORD_TYPE |
Unknown DNS record type. |
0x000025E9 DNS_ERROR_RECORD_TIMED_OUT |
DNS record timed out. |
0x000025EA DNS_ERROR_NAME_NOT_IN_ZONE |
Name not in DNS zone. |
0x000025EB DNS_ERROR_CNAME_LOOP |
CNAME loop detected. |
0x000025EC DNS_ERROR_NODE_IS_CNAME |
Node is a CNAME DNS record. |
0x000025ED DNS_ERROR_CNAME_COLLISION |
A CNAME record already exists for the given name. |
0x000025EE DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT |
Record is only at DNS zone root. |
0x000025EF DNS_ERROR_RECORD_ALREADY_EXISTS |
DNS record already exists. |
0x000025F0 DNS_ERROR_SECONDARY_DATA |
Secondary DNS zone data error. |
0x000025F1 DNS_ERROR_NO_CREATE_CACHE_DATA |
Could not create DNS cache data. |
0x000025F2 DNS_ERROR_NAME_DOES_NOT_EXIST |
DNS name does not exist. |
0x000025F3 DNS_WARNING_PTR_CREATE_FAILED |
Could not create pointer (PTR) record. |
0x000025F4 DNS_WARNING_DOMAIN_UNDELETED |
DNS domain was undeleted. |
0x000025F5 DNS_ERROR_DS_UNAVAILABLE |
The directory service is unavailable. |
0x000025F6 DNS_ERROR_DS_ZONE_ALREADY_EXISTS |
DNS zone already exists in the directory service. |
0x000025F7 DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE |
DNS server not creating or reading the boot file for the directory service integrated DNS zone. |
0x00002617 DNS_INFO_AXFR_COMPLETE |
DNS AXFR (zone transfer) complete. |
0x00002618 DNS_ERROR_AXFR |
DNS zone transfer failed. |
0x00002619 DNS_INFO_ADDED_LOCAL_WINS |
Added local WINS server. |
0x00002649 DNS_STATUS_CONTINUE_NEEDED |
Secure update call needs to continue update request. |
0x0000267B DNS_ERROR_NO_TCPIP |
TCP/IP network protocol not installed. |
0x0000267C DNS_ERROR_NO_DNS_SERVERS |
No DNS servers configured for local system. |
0x000026AD DNS_ERROR_DP_DOES_NOT_EXIST |
The specified directory partition does not exist. |
0x000026AE DNS_ERROR_DP_ALREADY_EXISTS |
The specified directory partition already exists. |
0x000026AF DNS_ERROR_DP_NOT_ENLISTED |
This DNS server is not enlisted in the specified directory partition. |
0x000026B0 DNS_ERROR_DP_ALREADY_ENLISTED |
This DNS server is already enlisted in the specified directory partition. |
0x000026B1 DNS_ERROR_DP_NOT_AVAILABLE |
The directory partition is not available at this time. Wait a few minutes and try again. |
0x000026B2 DNS_ERROR_DP_FSMO_ERROR |
The application directory partition operation failed. The domain controller holding the domain naming master role is down or unable to service the request or is not running Windows Server 2003. |
0x00002714 WSAEINTR |
A blocking operation was interrupted by a call to WSACancelBlockingCall. |
0x00002719 WSAEBADF |
The file handle supplied is not valid. |
0x0000271D WSAEACCES |
An attempt was made to access a socket in a way forbidden by its access permissions. |
0x0000271E WSAEFAULT |
The system detected an invalid pointer address in attempting to use a pointer argument in a call. |
0x00002726 WSAEINVAL |
An invalid argument was supplied. |
0x00002728 WSAEMFILE |
Too many open sockets. |
0x00002733 WSAEWOULDBLOCK |
A nonblocking socket operation could not be completed immediately. |
0x00002734 WSAEINPROGRESS |
A blocking operation is currently executing. |
0x00002735 WSAEALREADY |
An operation was attempted on a nonblocking socket that already had an operation in progress. |
0x00002736 WSAENOTSOCK |
An operation was attempted on something that is not a socket. |
0x00002737 WSAEDESTADDRREQ |
A required address was omitted from an operation on a socket. |
0x00002738 WSAEMSGSIZE |
A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself. |
0x00002739 WSAEPROTOTYPE |
A protocol was specified in the socket function call that does not support the semantics of the socket type requested. |
0x0000273A WSAENOPROTOOPT |
An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call. |
0x0000273B WSAEPROTONOSUPPORT |
The requested protocol has not been configured into the system, or no implementation for it exists. |
0x0000273C WSAESOCKTNOSUPPORT |
The support for the specified socket type does not exist in this address family. |
0x0000273D WSAEOPNOTSUPP |
The attempted operation is not supported for the type of object referenced. |
0x0000273E WSAEPFNOSUPPORT |
The protocol family has not been configured into the system or no implementation for it exists. |
0x0000273F WSAEAFNOSUPPORT |
An address incompatible with the requested protocol was used. |
0x00002740 WSAEADDRINUSE |
Only one usage of each socket address (protocol/network address/port) is normally permitted. |
0x00002741 WSAEADDRNOTAVAIL |
The requested address is not valid in its context. |
0x00002742 WSAENETDOWN |
A socket operation encountered a dead network. |
0x00002743 WSAENETUNREACH |
A socket operation was attempted to an unreachable network. |
0x00002744 WSAENETRESET |
The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress. |
0x00002745 WSAECONNABORTED |
An established connection was aborted by the software in your host machine. |
0x00002746 WSAECONNRESET |
An existing connection was forcibly closed by the remote host. |
0x00002747 WSAENOBUFS |
An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. |
0x00002748 WSAEISCONN |
A connect request was made on an already connected socket. |
0x00002749 WSAENOTCONN |
A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied. |
0x0000274A WSAESHUTDOWN |
A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call. |
0x0000274B WSAETOOMANYREFS |
Too many references to a kernel object. |
0x0000274C WSAETIMEDOUT |
A connection attempt failed because the connected party did not properly respond after a period of time, or the established connection failed because the connected host failed to respond. |
0x0000274D WSAECONNREFUSED |
No connection could be made because the target machine actively refused it. |
0x0000274E WSAELOOP |
Cannot translate name. |
0x0000274F WSAENAMETOOLONG |
Name or name component was too long. |
0x00002750 WSAEHOSTDOWN |
A socket operation failed because the destination host was down. |
0x00002751 WSAEHOSTUNREACH |
A socket operation was attempted to an unreachable host. |
0x00002752 WSAENOTEMPTY |
Cannot remove a directory that is not empty. |
0x00002753 WSAEPROCLIM |
A Windows Sockets implementation might have a limit on the number of applications that can use it simultaneously. |
0x00002754 WSAEUSERS |
Ran out of quota. |
0x00002755 WSAEDQUOT |
Ran out of disk quota. |
0x00002756 WSAESTALE |
File handle reference is no longer available. |
0x00002757 WSAEREMOTE |
Item is not available locally. |
0x0000276B WSASYSNOTREADY |
WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable. |
0x0000276C WSAVERNOTSUPPORTED |
The Windows Sockets version requested is not supported. |
0x0000276D WSANOTINITIALISED |
Either the application has not called WSAStartup, or WSAStartup failed. |
0x00002775 WSAEDISCON |
Returned by WSARecv or WSARecvFrom to indicate that the remote party has initiated a graceful shutdown sequence. |
0x00002776 WSAENOMORE |
No more results can be returned by WSALookupServiceNext. |
0x00002777 WSAECANCELLED |
A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled. |
0x00002778 WSAEINVALIDPROCTABLE |
The procedure call table is invalid. |
0x00002779 WSAEINVALIDPROVIDER |
The requested service provider is invalid. |
0x0000277A WSAEPROVIDERFAILEDINIT |
The requested service provider could not be loaded or initialized. |
0x0000277B WSASYSCALLFAILURE |
A system call that should never fail has failed. |
0x0000277C WSASERVICE_NOT_FOUND |
No such service is known. The service cannot be found in the specified namespace. |
0x0000277D WSATYPE_NOT_FOUND |
The specified class was not found. |
0x0000277E WSA_E_NO_MORE |
No more results can be returned by WSALookupServiceNext. |
0x0000277F WSA_E_CANCELLED |
A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled. |
0x00002780 WSAEREFUSED |
A database query failed because it was actively refused. |
0x00002AF9 WSAHOST_NOT_FOUND |
No such host is known. |
0x00002AFA WSATRY_AGAIN |
This is usually a temporary error during host name resolution and means that the local server did not receive a response from an authoritative server. |
0x00002AFB WSANO_RECOVERY |
A nonrecoverable error occurred during a database lookup. |
0x00002AFC WSANO_DATA |
The requested name is valid, but no data of the requested type was found. |
0x00002AFD WSA_QOS_RECEIVERS |
At least one reserve has arrived. |
0x00002AFE WSA_QOS_SENDERS |
At least one path has arrived. |
0x00002AFF WSA_QOS_NO_SENDERS |
There are no senders. |
0x00002B00 WSA_QOS_NO_RECEIVERS |
There are no receivers. |
0x00002B01 WSA_QOS_REQUEST_CONFIRMED |
Reserve has been confirmed. |
0x00002B02 WSA_QOS_ADMISSION_FAILURE |
Error due to lack of resources. |
0x00002B03 WSA_QOS_POLICY_FAILURE |
Rejected for administrative reasons—bad credentials. |
0x00002B04 WSA_QOS_BAD_STYLE |
Unknown or conflicting style. |
0x00002B05 WSA_QOS_BAD_OBJECT |
There is a problem with some part of the filterspec or provider-specific buffer in general. |
0x00002B06 WSA_QOS_TRAFFIC_CTRL_ERROR |
There is a problem with some part of the flowspec. |
0x00002B07 WSA_QOS_GENERIC_ERROR |
General quality of serve (QOS) error. |
0x00002B08 WSA_QOS_ESERVICETYPE |
An invalid or unrecognized service type was found in the flowspec. |
0x00002B09 WSA_QOS_EFLOWSPEC |
An invalid or inconsistent flowspec was found in the QOS structure. |
0x00002B0A WSA_QOS_EPROVSPECBUF |
Invalid QOS provider-specific buffer. |
0x00002B0B WSA_QOS_EFILTERSTYLE |
An invalid QOS filter style was used. |
0x00002B0C WSA_QOS_EFILTERTYPE |
An invalid QOS filter type was used. |
0x00002B0D WSA_QOS_EFILTERCOUNT |
An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR. |
0x00002B0E WSA_QOS_EOBJLENGTH |
An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer. |
0x00002B0F WSA_QOS_EFLOWCOUNT |
An incorrect number of flow descriptors was specified in the QOS structure. |
0x00002B10 WSA_QOS_EUNKOWNPSOBJ |
An unrecognized object was found in the QOS provider-specific buffer. |
0x00002B11 WSA_QOS_EPOLICYOBJ |
An invalid policy object was found in the QOS provider-specific buffer. |
0x00002B12 WSA_QOS_EFLOWDESC |
An invalid QOS flow descriptor was found in the flow descriptor list. |
0x00002B13 WSA_QOS_EPSFLOWSPEC |
An invalid or inconsistent flowspec was found in the QOS provider-specific buffer. |
0x00002B14 WSA_QOS_EPSFILTERSPEC |
An invalid FILTERSPEC was found in the QOS provider-specific buffer. |
0x00002B15 WSA_QOS_ESDMODEOBJ |
An invalid shape discard mode object was found in the QOS provider-specific buffer. |
0x00002B16 WSA_QOS_ESHAPERATEOBJ |
An invalid shaping rate object was found in the QOS provider-specific buffer. |
0x00002B17 WSA_QOS_RESERVED_PETYPE |
A reserved policy element was found in the QOS provider-specific buffer. |
0x000032C8 ERROR_IPSEC_QM_POLICY_EXISTS |
The specified quick mode policy already exists. |
0x000032C9 ERROR_IPSEC_QM_POLICY_NOT_FOUND |
The specified quick mode policy was not found. |
0x000032CA ERROR_IPSEC_QM_POLICY_IN_USE |
The specified quick mode policy is being used. |
0x000032CB ERROR_IPSEC_MM_POLICY_EXISTS |
The specified main mode policy already exists. |
0x000032CC ERROR_IPSEC_MM_POLICY_NOT_FOUND |
The specified main mode policy was not found. |
0x000032CD ERROR_IPSEC_MM_POLICY_IN_USE |
The specified main mode policy is being used. |
0x000032CE ERROR_IPSEC_MM_FILTER_EXISTS |
The specified main mode filter already exists. |
0x000032CF ERROR_IPSEC_MM_FILTER_NOT_FOUND |
The specified main mode filter was not found. |
0x000032D0 ERROR_IPSEC_TRANSPORT_FILTER_EXISTS |
The specified transport mode filter already exists. |
0x000032D1 ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOUND |
The specified transport mode filter does not exist. |
0x000032D2 ERROR_IPSEC_MM_AUTH_EXISTS |
The specified main mode authentication list exists. |
0x000032D3 ERROR_IPSEC_MM_AUTH_NOT_FOUND |
The specified main mode authentication list was not found. |
0x000032D4 ERROR_IPSEC_MM_AUTH_IN_USE |
The specified main mode authentication list is being used. |
0x000032D5 ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_FOUND |
The specified default main mode policy was not found. |
0x000032D6 ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOUND |
The specified default main mode authentication list was not found. |
0x000032D7 ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FOUND |
The specified default quick mode policy was not found. |
0x000032D8 ERROR_IPSEC_TUNNEL_FILTER_EXISTS |
The specified tunnel mode filter exists. |
0x000032D9 ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND |
The specified tunnel mode filter was not found. |
0x000032DA ERROR_IPSEC_MM_FILTER_PENDING_DELETION |
The main mode filter is pending deletion. |
0x000032DB ERROR_IPSEC_TRANSPORT_FILTER_ENDING_DELETION |
The transport filter is pending deletion. |
0x000032DC ERROR_IPSEC_TUNNEL_FILTER_PENDING_DELETION |
The tunnel filter is pending deletion. |
0x000032DD ERROR_IPSEC_MM_POLICY_PENDING_ELETION |
The main mode policy is pending deletion. |
0x000032DE ERROR_IPSEC_MM_AUTH_PENDING_DELETION |
The main mode authentication bundle is pending deletion. |
0x000032DF ERROR_IPSEC_QM_POLICY_PENDING_DELETION |
The quick mode policy is pending deletion. |
0x000032E0 WARNING_IPSEC_MM_POLICY_PRUNED |
The main mode policy was successfully added, but some of the requested offers are not supported. |
0x000032E1 WARNING_IPSEC_QM_POLICY_PRUNED |
The quick mode policy was successfully added, but some of the requested offers are not supported. |
0x000035E8 ERROR_IPSEC_IKE_NEG_STATUS_BEGIN |
Starts the list of frequencies of various IKE Win32 error codes encountered during negotiations. |
0x000035E9 ERROR_IPSEC_IKE_AUTH_FAIL |
The IKE authentication credentials are unacceptable. |
0x000035EA ERROR_IPSEC_IKE_ATTRIB_FAIL |
The IKE security attributes are unacceptable. |
0x000035EB ERROR_IPSEC_IKE_NEGOTIATION_PENDING |
The IKE negotiation is in progress. |
0x000035EC ERROR_IPSEC_IKE_GENERAL_PROCESSING_ERROR |
General processing error. |
0x000035ED ERROR_IPSEC_IKE_TIMED_OUT |
Negotiation timed out. |
0x000035EE ERROR_IPSEC_IKE_NO_CERT |
The IKE failed to find a valid machine certificate. Contact your network security administrator about installing a valid certificate in the appropriate certificate store. |
0x000035EF ERROR_IPSEC_IKE_SA_DELETED |
The IKE security association (SA) was deleted by a peer before it was completely established. |
0x000035F0 ERROR_IPSEC_IKE_SA_REAPED |
The IKE SA was deleted before it was completely established. |
0x000035F1 ERROR_IPSEC_IKE_MM_ACQUIRE_DROP |
The negotiation request sat in the queue too long. |
0x000035F2 ERROR_IPSEC_IKE_QM_ACQUIRE_DROP |
The negotiation request sat in the queue too long. |
0x000035F3 ERROR_IPSEC_IKE_QUEUE_DROP_MM |
The negotiation request sat in the queue too long. |
0x000035F4 ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM |
The negotiation request sat in the queue too long. |
0x000035F5 ERROR_IPSEC_IKE_DROP_NO_RESPONSE |
There was no response from a peer. |
0x000035F6 ERROR_IPSEC_IKE_MM_DELAY_DROP |
The negotiation took too long. |
0x000035F7 ERROR_IPSEC_IKE_QM_DELAY_DROP |
The negotiation took too long. |
0x000035F8 ERROR_IPSEC_IKE_ERROR |
An unknown error occurred. |
0x000035F9 ERROR_IPSEC_IKE_CRL_FAILED |
The certificate revocation check failed. |
0x000035FA ERROR_IPSEC_IKE_INVALID_KEY_USAGE |
Invalid certificate key usage. |
0x000035FB ERROR_IPSEC_IKE_INVALID_CERT_TYPE |
Invalid certificate type. |
0x000035FC ERROR_IPSEC_IKE_NO_PRIVATE_KEY |
The IKE negotiation failed because the machine certificate used does not have a private key. IPsec certificates require a private key. Contact your network security administrator about a certificate that has a private key. |
0x000035FE ERROR_IPSEC_IKE_DH_FAIL |
There was a failure in the Diffie-Hellman computation. |
0x00003600 ERROR_IPSEC_IKE_INVALID_HEADER |
Invalid header. |
0x00003601 ERROR_IPSEC_IKE_NO_POLICY |
No policy configured. |
0x00003602 ERROR_IPSEC_IKE_INVALID_SIGNATURE |
Failed to verify signature. |
0x00003603 ERROR_IPSEC_IKE_KERBEROS_ERROR |
Failed to authenticate using Kerberos. |
0x00003604 ERROR_IPSEC_IKE_NO_PUBLIC_KEY |
The peer's certificate did not have a public key. |
0x00003605 ERROR_IPSEC_IKE_PROCESS_ERR |
Error processing the error payload. |
0x00003606 ERROR_IPSEC_IKE_PROCESS_ERR_SA |
Error processing the SA payload. |
0x00003607 ERROR_IPSEC_IKE_PROCESS_ERR_PROP |
Error processing the proposal payload. |
0x00003608 ERROR_IPSEC_IKE_PROCESS_ERR_TRANS |
Error processing the transform payload. |
0x00003609 ERROR_IPSEC_IKE_PROCESS_ERR_KE |
Error processing the key exchange payload. |
0x0000360A ERROR_IPSEC_IKE_PROCESS_ERR_ID |
Error processing the ID payload. |
0x0000360B ERROR_IPSEC_IKE_PROCESS_ERR_CERT |
Error processing the certification payload. |
0x0000360C ERROR_IPSEC_IKE_PROCESS_ERR_CERT_REQ |
Error processing the certificate request payload. |
0x0000360D ERROR_IPSEC_IKE_PROCESS_ERR_HASH |
Error processing the hash payload. |
0x0000360E ERROR_IPSEC_IKE_PROCESS_ERR_SIG |
Error processing the signature payload. |
0x0000360F ERROR_IPSEC_IKE_PROCESS_ERR_NONCE |
Error processing the nonce payload. |
0x00003610 ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY |
Error processing the notify payload. |
0x00003611 ERROR_IPSEC_IKE_PROCESS_ERR_DELETE |
Error processing the delete payload. |
0x00003612 ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR |
Error processing the VendorId payload. |
0x00003613 ERROR_IPSEC_IKE_INVALID_PAYLOAD |
Invalid payload received. |
0x00003614 ERROR_IPSEC_IKE_LOAD_SOFT_SA |
Soft SA loaded. |
0x00003615 ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN |
Soft SA torn down. |
0x00003616 ERROR_IPSEC_IKE_INVALID_COOKIE |
Invalid cookie received. |
0x00003617 ERROR_IPSEC_IKE_NO_PEER_CERT |
Peer failed to send valid machine certificate. |
0x00003618 ERROR_IPSEC_IKE_PEER_CRL_FAILED |
Certification revocation check of peer's certificate failed. |
0x00003619 ERROR_IPSEC_IKE_POLICY_CHANGE |
New policy invalidated SAs formed with the old policy. |
0x0000361A ERROR_IPSEC_IKE_NO_MM_POLICY |
There is no available main mode IKE policy. |
0x0000361B ERROR_IPSEC_IKE_NOTCBPRIV |
Failed to enabled trusted computer base (TCB) privilege. |
0x0000361C ERROR_IPSEC_IKE_SECLOADFAIL |
Failed to load SECURITY.DLL. |
0x0000361D ERROR_IPSEC_IKE_FAILSSPINIT |
Failed to obtain the security function table dispatch address from the SSPI. |
0x0000361E ERROR_IPSEC_IKE_FAILQUERYSSP |
Failed to query the Kerberos package to obtain the max token size. |
0x0000361F ERROR_IPSEC_IKE_SRVACQFAIL |
Failed to obtain the Kerberos server credentials for the Internet Security Association and Key Management Protocol (ISAKMP)/ERROR_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup. |
0x00003620 ERROR_IPSEC_IKE_SRVQUERYCRED |
Failed to determine the SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes). |
0x00003621 ERROR_IPSEC_IKE_GETSPIFAIL |
Failed to obtain a new service provider interface (SPI) for the inbound SA from the IPsec driver. The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters. |
0x00003622 ERROR_IPSEC_IKE_INVALID_FILTER |
Given filter is invalid. |
0x00003623 ERROR_IPSEC_IKE_OUT_OF_MEMORY |
Memory allocation failed. |
0x00003624 ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED |
Failed to add an SA to the IPSec driver. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine. |
0x00003625 ERROR_IPSEC_IKE_INVALID_POLICY |
Invalid policy. |
0x00003626 ERROR_IPSEC_IKE_UNKNOWN_DOI |
Invalid digital object identifier (DOI). |
0x00003627 ERROR_IPSEC_IKE_INVALID_SITUATION |
Invalid situation. |
0x00003628 ERROR_IPSEC_IKE_DH_FAILURE |
Diffie-Hellman failure. |
0x00003629 ERROR_IPSEC_IKE_INVALID_GROUP |
Invalid Diffie-Hellman group. |
0x0000362A ERROR_IPSEC_IKE_ENCRYPT |
Error encrypting payload. |
0x0000362B ERROR_IPSEC_IKE_DECRYPT |
Error decrypting payload. |
0x0000362C ERROR_IPSEC_IKE_POLICY_MATCH |
Policy match error. |
0x0000362D ERROR_IPSEC_IKE_UNSUPPORTED_ID |
Unsupported ID. |
0x0000362E ERROR_IPSEC_IKE_INVALID_HASH |
Hash verification failed. |
0x0000362F ERROR_IPSEC_IKE_INVALID_HASH_ALG |
Invalid hash algorithm. |
0x00003630 ERROR_IPSEC_IKE_INVALID_HASH_SIZE |
Invalid hash size. |
0x00003631 ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG |
Invalid encryption algorithm. |
0x00003632 ERROR_IPSEC_IKE_INVALID_AUTH_ALG |
Invalid authentication algorithm. |
0x00003633 ERROR_IPSEC_IKE_INVALID_SIG |
Invalid certificate signature. |
0x00003634 ERROR_IPSEC_IKE_LOAD_FAILED |
Load failed. |
0x00003635 ERROR_IPSEC_IKE_RPC_DELETE |
Deleted by using an RPC call. |
0x00003636 ERROR_IPSEC_IKE_BENIGN_REINIT |
A temporary state was created to perform reinitialization. This is not a real failure. |
0x00003637 ERROR_IPSEC_IKE_INVALID_RESPONDER_LIFETIME_NOTIFY |
The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Fix the policy on the peer machine. |
0x00003639 ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN |
Key length in the certificate is too small for configured security requirements. |
0x0000363A ERROR_IPSEC_IKE_MM_LIMIT |
Maximum number of established MM SAs to peer exceeded. |
0x0000363B ERROR_IPSEC_IKE_NEGOTIATION_DISABLED |
The IKE received a policy that disables negotiation. |
0x0000363C ERROR_IPSEC_IKE_QM_LIMIT |
Reached maximum quick mode limit for the main mode. New main mode will be started. |
0x0000363D ERROR_IPSEC_IKE_MM_EXPIRED |
Main mode SA lifetime expired or the peer sent a main mode delete. |
0x0000363E ERROR_IPSEC_IKE_PEER_MM_ASSUMED_INVALID |
Main mode SA assumed to be invalid because peer stopped responding. |
0x0000363F ERROR_IPSEC_IKE_CERT_CHAIN_POLICY_MISMATCH |
Certificate does not chain to a trusted root in IPsec policy. |
0x00003640 ERROR_IPSEC_IKE_UNEXPECTED_MESSAGE_ID |
Received unexpected message ID. |
0x00003641 ERROR_IPSEC_IKE_INVALID_UMATTS |
Received invalid AuthIP user mode attributes. |
0x00003642 ERROR_IPSEC_IKE_DOS_COOKIE_SENT |
Sent DOS cookie notify to initiator. |
0x00003643 ERROR_IPSEC_IKE_SHUTTING_DOWN |
The IKE service is shutting down. |
0x00003644 ERROR_IPSEC_IKE_CGA_AUTH_FAILED |
Could not verify the binding between the color graphics adapter (CGA) address and the certificate. |
0x00003645 ERROR_IPSEC_IKE_PROCESS_ERR_NATOA |
Error processing the NatOA payload. |
0x00003646 ERROR_IPSEC_IKE_INVALID_MM_FOR_QM |
The parameters of the main mode are invalid for this quick mode. |
0x00003647 ERROR_IPSEC_IKE_QM_EXPIRED |
The quick mode SA was expired by the IPsec driver. |
0x00003648 ERROR_IPSEC_IKE_TOO_MANY_FILTERS |
Too many dynamically added IKEEXT filters were detected. |
0x00003649 ERROR_IPSEC_IKE_NEG_STATUS_END |
Ends the list of frequencies of various IKE Win32 error codes encountered during negotiations. |
0x000036B0 ERROR_SXS_SECTION_NOT_FOUND |
The requested section was not present in the activation context. |
0x000036B1 ERROR_SXS_CANT_GEN_ACTCTX |
The application has failed to start because its side-by-side configuration is incorrect. See the application event log for more detail. |
0x000036B2 ERROR_SXS_INVALID_ACTCTXDATA_FORMAT |
The application binding data format is invalid. |
0x000036B3 ERROR_SXS_ASSEMBLY_NOT_FOUND |
The referenced assembly is not installed on your system. |
0x000036B4 ERROR_SXS_MANIFEST_FORMAT_ERROR |
The manifest file does not begin with the required tag and format information. |
0x000036B5 ERROR_SXS_MANIFEST_PARSE_ERROR |
The manifest file contains one or more syntax errors. |
0x000036B6 ERROR_SXS_ACTIVATION_CONTEXT_DISABLED |
The application attempted to activate a disabled activation context. |
0x000036B7 ERROR_SXS_KEY_NOT_FOUND |
The requested lookup key was not found in any active activation context. |
0x000036B8 ERROR_SXS_VERSION_CONFLICT |
A component version required by the application conflicts with another active component version. |
0x000036B9 ERROR_SXS_WRONG_SECTION_TYPE |
The type requested activation context section does not match the query API used. |
0x000036BA ERROR_SXS_THREAD_QUERIES_DISABLED |
Lack of system resources has required isolated activation to be disabled for the current thread of execution. |
0x000036BB ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET |
An attempt to set the process default activation context failed because the process default activation context was already set. |
0x000036BC ERROR_SXS_UNKNOWN_ENCODING_GROUP |
The encoding group identifier specified is not recognized. |
0x000036BD ERROR_SXS_UNKNOWN_ENCODING |
The encoding requested is not recognized. |
0x000036BE ERROR_SXS_INVALID_XML_NAMESPACE_URI |
The manifest contains a reference to an invalid URI. |
0x000036BF ERROR_SXS_ROOT_MANIFEST_DEPENDENCY_OT_INSTALLED |
The application manifest contains a reference to a dependent assembly that is not installed. |
0x000036C0 ERROR_SXS_LEAF_MANIFEST_DEPENDENCY_NOT_INSTALLED |
The manifest for an assembly used by the application has a reference to a dependent assembly that is not installed. |
0x000036C1 ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE |
The manifest contains an attribute for the assembly identity that is not valid. |
0x000036C2 ERROR_SXS_MANIFEST_MISSING_REQUIRED_DEFAULT_NAMESPACE |
The manifest is missing the required default namespace specification on the assembly element. |
0x000036C3 ERROR_SXS_MANIFEST_INVALID_REQUIRED_DEFAULT_NAMESPACE |
The manifest has a default namespace specified on the assembly element but its value is not urn:schemas-microsoft-com:asm.v1"." |
0x000036C4 ERROR_SXS_PRIVATE_MANIFEST_CROSS_PATH_WITH_REPARSE_POINT |
The private manifest probed has crossed the reparse-point-associated path. |
0x000036C5 ERROR_SXS_DUPLICATE_DLL_NAME |
Two or more components referenced directly or indirectly by the application manifest have files by the same name. |
0x000036C6 ERROR_SXS_DUPLICATE_WINDOWCLASS_NAME |
Two or more components referenced directly or indirectly by the application manifest have window classes with the same name. |
0x000036C7 ERROR_SXS_DUPLICATE_CLSID |
Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs. |
0x000036C8 ERROR_SXS_DUPLICATE_IID |
Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs. |
0x000036C9 ERROR_SXS_DUPLICATE_TLBID |
Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs. |
0x000036CA ERROR_SXS_DUPLICATE_PROGID |
Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs. |
0x000036CB ERROR_SXS_DUPLICATE_ASSEMBLY_NAME |
Two or more components referenced directly or indirectly by the application manifest are different versions of the same component, which is not permitted. |
0x000036CC ERROR_SXS_FILE_HASH_MISMATCH |
A component's file does not match the verification information present in the component manifest. |
0x000036CD ERROR_SXS_POLICY_PARSE_ERROR |
The policy manifest contains one or more syntax errors. |
0x000036CE ERROR_SXS_XML_E_MISSINGQUOTE |
Manifest Parse Error: A string literal was expected, but no opening quotation mark was found. |
0x000036CF ERROR_SXS_XML_E_COMMENTSYNTAX |
Manifest Parse Error: Incorrect syntax was used in a comment. |
0x000036D0 ERROR_SXS_XML_E_BADSTARTNAMECHAR |
Manifest Parse Error: A name started with an invalid character. |
0x000036D1 ERROR_SXS_XML_E_BADNAMECHAR |
Manifest Parse Error: A name contained an invalid character. |
0x000036D2 ERROR_SXS_XML_E_BADCHARINSTRING |
Manifest Parse Error: A string literal contained an invalid character. |
0x000036D3 ERROR_SXS_XML_E_XMLDECLSYNTAX |
Manifest Parse Error: Invalid syntax for an XML declaration. |
0x000036D4 ERROR_SXS_XML_E_BADCHARDATA |
Manifest Parse Error: An Invalid character was found in text content. |
0x000036D5 ERROR_SXS_XML_E_MISSINGWHITESPACE |
Manifest Parse Error: Required white space was missing. |
0x000036D6 ERROR_SXS_XML_E_EXPECTINGTAGEND |
Manifest Parse Error: The angle bracket (>) character was expected. |
0x000036D7 ERROR_SXS_XML_E_MISSINGSEMICOLON |
Manifest Parse Error: A semicolon (;) was expected. |
0x000036D8 ERROR_SXS_XML_E_UNBALANCEDPAREN |
Manifest Parse Error: Unbalanced parentheses. |
0x000036D9 ERROR_SXS_XML_E_INTERNALERROR |
Manifest Parse Error: Internal error. |
0x000036DA ERROR_SXS_XML_E_UNEXPECTED_WHITESPACE |
Manifest Parse Error: Whitespace is not allowed at this location. |
0x000036DB ERROR_SXS_XML_E_INCOMPLETE_ENCODING |
Manifest Parse Error: End of file reached in invalid state for current encoding. |
0x000036DC ERROR_SXS_XML_E_MISSING_PAREN |
Manifest Parse Error: Missing parenthesis. |
0x000036DD ERROR_SXS_XML_E_EXPECTINGCLOSEQUOTE |
Manifest Parse Error: A single (') or double (") quotation mark is missing. |
0x000036DE ERROR_SXS_XML_E_MULTIPLE_COLONS |
Manifest Parse Error: Multiple colons are not allowed in a name. |
0x000036DF ERROR_SXS_XML_E_INVALID_DECIMAL |
Manifest Parse Error: Invalid character for decimal digit. |
0x000036E0 ERROR_SXS_XML_E_INVALID_HEXIDECIMAL |
Manifest Parse Error: Invalid character for hexadecimal digit. |
0x000036E1 ERROR_SXS_XML_E_INVALID_UNICODE |
Manifest Parse Error: Invalid Unicode character value for this platform. |
0x000036E2 ERROR_SXS_XML_E_WHITESPACEORQUESTIONMARK |
Manifest Parse Error: Expecting whitespace or question mark (?). |
0x000036E3 ERROR_SXS_XML_E_UNEXPECTEDENDTAG |
Manifest Parse Error: End tag was not expected at this location. |
0x000036E4 ERROR_SXS_XML_E_UNCLOSEDTAG |
Manifest Parse Error: The following tags were not closed: %1. |
0x000036E5 ERROR_SXS_XML_E_DUPLICATEATTRIBUTE |
Manifest Parse Error: Duplicate attribute. |
0x000036E6 ERROR_SXS_XML_E_MULTIPLEROOTS |
Manifest Parse Error: Only one top-level element is allowed in an XML document. |
0x000036E7 ERROR_SXS_XML_E_INVALIDATROOTLEVEL |
Manifest Parse Error: Invalid at the top level of the document. |
0x000036E8 ERROR_SXS_XML_E_BADXMLDECL |
Manifest Parse Error: Invalid XML declaration. |
0x000036E9 ERROR_SXS_XML_E_MISSINGROOT |
Manifest Parse Error: XML document must have a top-level element. |
0x000036EA ERROR_SXS_XML_E_UNEXPECTEDEOF |
Manifest Parse Error: Unexpected end of file. |
0x000036EB ERROR_SXS_XML_E_BADPEREFINSUBSET |
Manifest Parse Error: Parameter entities cannot be used inside markup declarations in an internal subset. |
0x000036EC ERROR_SXS_XML_E_UNCLOSEDSTARTTAG |
Manifest Parse Error: Element was not closed. |
0x000036ED ERROR_SXS_XML_E_UNCLOSEDENDTAG |
Manifest Parse Error: End element was missing the angle bracket (>) character. |
0x000036EE ERROR_SXS_XML_E_UNCLOSEDSTRING |
Manifest Parse Error: A string literal was not closed. |
0x000036EF ERROR_SXS_XML_E_UNCLOSEDCOMMENT |
Manifest Parse Error: A comment was not closed. |
0x000036F0 ERROR_SXS_XML_E_UNCLOSEDDECL |
Manifest Parse Error: A declaration was not closed. |
0x000036F1 ERROR_SXS_XML_E_UNCLOSEDCDATA |
Manifest Parse Error: A CDATA section was not closed. |
0x000036F2 ERROR_SXS_XML_E_RESERVEDNAMESPACE |
Manifest Parse Error: The namespace prefix is not allowed to start with the reserved string xml"." |
0x000036F3 ERROR_SXS_XML_E_INVALIDENCODING |
Manifest Parse Error: System does not support the specified encoding. |
0x000036F4 ERROR_SXS_XML_E_INVALIDSWITCH |
Manifest Parse Error: Switch from current encoding to specified encoding not supported. |
0x000036F5 ERROR_SXS_XML_E_BADXMLCASE |
Manifest Parse Error: The name "xml" is reserved and must be lowercase. |
0x000036F6 ERROR_SXS_XML_E_INVALID_STANDALONE |
Manifest Parse Error: The stand-alone attribute must have the value "yes" or "no". |
0x000036F7 ERROR_SXS_XML_E_UNEXPECTED_STANDALONE |
Manifest Parse Error: The stand-alone attribute cannot be used in external entities. |
0x000036F8 ERROR_SXS_XML_E_INVALID_VERSION |
Manifest Parse Error: Invalid version number. |
0x000036F9 ERROR_SXS_XML_E_MISSINGEQUALS |
Manifest Parse Error: Missing equal sign (=) between the attribute and the attribute value. |
0x000036FA ERROR_SXS_PROTECTION_RECOVERY_FAILED |
Assembly Protection Error: Unable to recover the specified assembly. |
0x000036FB ERROR_SXS_PROTECTION_PUBLIC_KEY_OO_SHORT |
Assembly Protection Error: The public key for an assembly was too short to be allowed. |
0x000036FC ERROR_SXS_PROTECTION_CATALOG_NOT_VALID |
Assembly Protection Error: The catalog for an assembly is not valid, or does not match the assembly's manifest. |
0x000036FD ERROR_SXS_UNTRANSLATABLE_HRESULT |
An HRESULT could not be translated to a corresponding Win32 error code. |
0x000036FE ERROR_SXS_PROTECTION_CATALOG_FILE_MISSING |
Assembly Protection Error: The catalog for an assembly is missing. |
0x000036FF ERROR_SXS_MISSING_ASSEMBLY_IDENTITY_ATTRIBUTE |
The supplied assembly identity is missing one or more attributes that must be present in this context. |
0x00003700 ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE_NAME |
The supplied assembly identity has one or more attribute names that contain characters not permitted in XML names. |
0x00003701 ERROR_SXS_ASSEMBLY_MISSING |
The referenced assembly could not be found. |
0x00003702 ERROR_SXS_CORRUPT_ACTIVATION_STACK |
The activation context activation stack for the running thread of execution is corrupt. |
0x00003703 ERROR_SXS_CORRUPTION |
The application isolation metadata for this process or thread has become corrupt. |
0x00003704 ERROR_SXS_EARLY_DEACTIVATION |
The activation context being deactivated is not the most recently activated one. |
0x00003705 ERROR_SXS_INVALID_DEACTIVATION |
The activation context being deactivated is not active for the current thread of execution. |
0x00003706 ERROR_SXS_MULTIPLE_DEACTIVATION |
The activation context being deactivated has already been deactivated. |
0x00003707 ERROR_SXS_PROCESS_TERMINATION_REQUESTED |
A component used by the isolation facility has requested to terminate the process. |
0x00003708 ERROR_SXS_RELEASE_ACTIVATION_ONTEXT |
A kernel mode component is releasing a reference on an activation context. |
0x00003709 ERROR_SXS_SYSTEM_DEFAULT_ACTIVATION_CONTEXT_EMPTY |
The activation context of the system default assembly could not be generated. |
0x0000370A ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUE |
The value of an attribute in an identity is not within the legal range. |
0x0000370B ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME |
The name of an attribute in an identity is not within the legal range. |
0x0000370C ERROR_SXS_IDENTITY_DUPLICATE_ATTRIBUTE |
An identity contains two definitions for the same attribute. |
0x0000370D ERROR_SXS_IDENTITY_PARSE_ERROR |
The identity string is malformed. This might be due to a trailing comma, more than two unnamed attributes, a missing attribute name, or a missing attribute value. |
0x0000370E ERROR_MALFORMED_SUBSTITUTION_STRING |
A string containing localized substitutable content was malformed. Either a dollar sign ($) was followed by something other than a left parenthesis or another dollar sign, or a substitution's right parenthesis was not found. |
0x0000370F ERROR_SXS_INCORRECT_PUBLIC_KEY_OKEN |
The public key token does not correspond to the public key specified. |
0x00003710 ERROR_UNMAPPED_SUBSTITUTION_STRING |
A substitution string had no mapping. |
0x00003711 ERROR_SXS_ASSEMBLY_NOT_LOCKED |
The component must be locked before making the request. |
0x00003712 ERROR_SXS_COMPONENT_STORE_CORRUPT |
The component store has been corrupted. |
0x00003713 ERROR_ADVANCED_INSTALLER_FAILED |
An advanced installer failed during setup or servicing. |
0x00003714 ERROR_XML_ENCODING_MISMATCH |
The character encoding in the XML declaration did not match the encoding used in the document. |
0x00003715 ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT |
The identities of the manifests are identical, but the contents are different. |
0x00003716 ERROR_SXS_IDENTITIES_DIFFERENT |
The component identities are different. |
0x00003717 ERROR_SXS_ASSEMBLY_IS_NOT_A_DEPLOYMENT |
The assembly is not a deployment. |
0x00003718 ERROR_SXS_FILE_NOT_PART_OF_ASSEMBLY |
The file is not a part of the assembly. |
0x00003719 ERROR_SXS_MANIFEST_TOO_BIG |
The size of the manifest exceeds the maximum allowed. |
0x0000371A ERROR_SXS_SETTING_NOT_REGISTERED |
The setting is not registered. |
0x0000371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE |
One or more required members of the transaction are not present. |
0x00003A98 ERROR_EVT_INVALID_CHANNEL_PATH |
The specified channel path is invalid. |
0x00003A99 ERROR_EVT_INVALID_QUERY |
The specified query is invalid. |
0x00003A9A ERROR_EVT_PUBLISHER_METADATA_NOT_FOUND |
The publisher metadata cannot be found in the resource. |
0x00003A9B ERROR_EVT_EVENT_TEMPLATE_NOT_FOUND |
The template for an event definition cannot be found in the resource (error = %1). |
0x00003A9C ERROR_EVT_INVALID_PUBLISHER_NAME |
The specified publisher name is invalid. |
0x00003A9D ERROR_EVT_INVALID_EVENT_DATA |
The event data raised by the publisher is not compatible with the event template definition in the publisher's manifest. |
0x00003A9F ERROR_EVT_CHANNEL_NOT_FOUND |
The specified channel could not be found. Check channel configuration. |
0x00003AA0 ERROR_EVT_MALFORMED_XML_TEXT |
The specified XML text was not well-formed. See extended error for more details. |
0x00003AA1 ERROR_EVT_SUBSCRIPTION_TO_DIRECT_CHANNEL |
The caller is trying to subscribe to a direct channel which is not allowed. The events for a direct channel go directly to a log file and cannot be subscribed to. |
0x00003AA2 ERROR_EVT_CONFIGURATION_ERROR |
Configuration error. |
0x00003AA3 ERROR_EVT_QUERY_RESULT_STALE |
The query result is stale or invalid. This might be due to the log being cleared or rolling over after the query result was created. Users should handle this code by releasing the query result object and reissuing the query. |
0x00003AA4 ERROR_EVT_QUERY_RESULT_INVALID_POSITION |
Query result is currently at an invalid position. |
0x00003AA5 ERROR_EVT_NON_VALIDATING_MSXML |
Registered Microsoft XML (MSXML) does not support validation. |
0x00003AA6 ERROR_EVT_FILTER_ALREADYSCOPED |
An expression can only be followed by a change-of-scope operation if it itself evaluates to a node set and is not already part of some other change-of-scope operation. |
0x00003AA7 ERROR_EVT_FILTER_NOTELTSET |
Cannot perform a step operation from a term that does not represent an element set. |
0x00003AA8 ERROR_EVT_FILTER_INVARG |
Left side arguments to binary operators must be either attributes, nodes, or variables and right side arguments must be constants. |
0x00003AA9 ERROR_EVT_FILTER_INVTEST |
A step operation must involve either a node test or, in the case of a predicate, an algebraic expression against which to test each node in the node set identified by the preceding node set can be evaluated. |
0x00003AAA ERROR_EVT_FILTER_INVTYPE |
This data type is currently unsupported. |
0x00003AAB ERROR_EVT_FILTER_PARSEERR |
A syntax error occurred at position %1!d! |
0x00003AAC ERROR_EVT_FILTER_UNSUPPORTEDOP |
This operator is unsupported by this implementation of the filter. |
0x00003AAD ERROR_EVT_FILTER_UNEXPECTEDTOKEN |
The token encountered was unexpected. |
0x00003AAE ERROR_EVT_INVALID_OPERATION_OVER_ENABLED_DIRECT_CHANNEL |
The requested operation cannot be performed over an enabled direct channel. The channel must first be disabled before performing the requested operation. |
0x00003AAF ERROR_EVT_INVALID_CHANNEL_PROPERTY_VALUE |
Channel property %1!s! contains an invalid value. The value has an invalid type, is outside the valid range, cannot be updated, or is not supported by this type of channel. |
0x00003AB0 ERROR_EVT_INVALID_PUBLISHER_PROPERTY_VALUE |
Publisher property %1!s! contains an invalid value. The value has an invalid type, is outside the valid range, cannot be updated, or is not supported by this type of publisher. |
0x00003AB1 ERROR_EVT_CHANNEL_CANNOT_ACTIVATE |
The channel fails to activate. |
0x00003AB2 ERROR_EVT_FILTER_TOO_COMPLEX |
The xpath expression exceeded supported complexity. Simplify it or split it into two or more simple expressions. |
0x00003AB3 ERROR_EVT_MESSAGE_NOT_FOUND |
The message resource is present but the message is not found in the string or message table. |
0x00003AB4 ERROR_EVT_MESSAGE_ID_NOT_FOUND |
The message ID for the desired message could not be found. |
0x00003AB5 ERROR_EVT_UNRESOLVED_VALUE_INSERT |
The substitution string for the insert index (%1) could not be found. |
0x00003AB6 ERROR_EVT_UNRESOLVED_PARAMETER_INSERT |
The description string for the parameter reference (%1) could not be found. |
0x00003AB7 ERROR_EVT_MAX_INSERTS_REACHED |
The maximum number of replacements has been reached. |
0x00003AB8 ERROR_EVT_EVENT_DEFINITION_NOT_OUND |
The event definition could not be found for the event ID (%1). |
0x00003AB9 ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND |
The locale-specific resource for the desired message is not present. |
0x00003ABA ERROR_EVT_VERSION_TOO_OLD |
The resource is too old to be compatible. |
0x00003ABB ERROR_EVT_VERSION_TOO_NEW |
The resource is too new to be compatible. |
0x00003ABC ERROR_EVT_CANNOT_OPEN_CHANNEL_OF_QUERY |
The channel at index %1 of the query cannot be opened. |
0x00003ABD ERROR_EVT_PUBLISHER_DISABLED |
The publisher has been disabled and its resource is not available. This usually occurs when the publisher is in the process of being uninstalled or upgraded. |
0x00003AE8 ERROR_EC_SUBSCRIPTION_CANNOT_ACTIVATE |
The subscription fails to activate. |
0x00003AE9 ERROR_EC_LOG_DISABLED |
The log of the subscription is in a disabled state and events cannot be forwarded to it. The log must first be enabled before the subscription can be activated. |
0x00003AFC ERROR_MUI_FILE_NOT_FOUND |
The resource loader failed to find the Multilingual User Interface (MUI) file. |
0x00003AFD ERROR_MUI_INVALID_FILE |
The resource loader failed to load the MUI file because the file failed to pass validation. |
0x00003AFE ERROR_MUI_INVALID_RC_CONFIG |
The release candidate (RC) manifest is corrupted with garbage data, is an unsupported version, or is missing a required item. |
0x00003AFF ERROR_MUI_INVALID_LOCALE_NAME |
The RC manifest has an invalid culture name. |
0x00003B00 ERROR_MUI_INVALID_ULTIMATEFALLBACK_NAME |
The RC Manifest has an invalid ultimate fallback name. |
0x00003B01 ERROR_MUI_FILE_NOT_LOADED |
The resource loader cache does not have a loaded MUI entry. |
0x00003B02 ERROR_RESOURCE_ENUM_USER_STOP |
The user stopped resource enumeration. |
0x00003B03 ERROR_MUI_INTLSETTINGS_UILANG_NOT_INSTALLED |
User interface language installation failed. |
0x00003B04 ERROR_MUI_INTLSETTINGS_INVALID_LOCALE_NAME |
Locale installation failed. |
0x00003B60 ERROR_MCA_INVALID_CAPABILITIES_STRING |
The monitor returned a DDC/CI capabilities string that did not comply with the ACCESS.bus 3.0, DDC/CI 1.1, or MCCS 2 Revision 1 specification. |
0x00003B61 ERROR_MCA_INVALID_VCP_VERSION |
The monitor's VCP version (0xDF) VCP code returned an invalid version value. |
0x00003B62 ERROR_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION |
The monitor does not comply with the MCCS specification it claims to support. |
0x00003B63 ERROR_MCA_MCCS_VERSION_MISMATCH |
The MCCS version in a monitor's mccs_ver capability does not match the MCCS version the monitor reports when the VCP version (0xDF) VCP code is used. |
0x00003B64 ERROR_MCA_UNSUPPORTED_MCCS_VERSION |
The monitor configuration API works only with monitors that support the MCCS 1.0, MCCS 2.0, or MCCS 2.0 Revision 1 specifications. |
0x00003B65 ERROR_MCA_INTERNAL_ERROR |
An internal monitor configuration API error occurred. |
0x00003B66 ERROR_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED |
The monitor returned an invalid monitor technology type. CRT, plasma, and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification. |
0x00003B67 ERROR_MCA_UNSUPPORTED_COLOR_TEMPERATURE |
The SetMonitorColorTemperature() caller passed a color temperature to it that the current monitor did not support. CRT, plasma, and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification. |
0x00003B92 ERROR_AMBIGUOUS_SYSTEM_DEVICE |
The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria. |
0x00003BC3 ERROR_SYSTEM_DEVICE_NOT_FOUND |
The requested system device cannot be found. |