Add-AzDnsRecordConfig
將 DNS 記錄新增至本機記錄集物件。
Syntax
Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-Ipv4Address <String>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-Ipv6Address <String>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-Nsdname <String>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-Exchange <String>
-Preference <UInt16>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-Ptrdname <String>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-Value <String>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-Priority <UInt16>
-Target <String>
-Port <UInt16>
-Weight <UInt16>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-Cname <String>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-CaaFlags <Byte>
-CaaTag <String>
-CaaValue <String>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-KeyTag <Int32>
-Algorithm <Int32>
-DigestType <Int32>
-Digest <String>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Add-AzDnsRecordConfig
-RecordSet <DnsRecordSet>
-Usage <Int32>
-Selector <Int32>
-MatchingType <Int32>
-CertificateAssociationData <String>
[-DefaultProfile <IAzureContextContainer>]
[<CommonParameters>] Description
Add-AzDnsRecordConfig Cmdlet 會將域名系統 （DNS） 記錄新增至 RecordSet 物件。 RecordSet 對像是離線物件，而且在您執行 Set-AzDnsRecordSet Cmdlet 以將變更保存到 Microsoft Azure DNS 服務之前，才會變更 DNS 回應。 SOA 記錄會在建立 DNS 區域時建立，並在刪除 DNS 區域時移除。 您無法新增或移除SOA記錄，但可以編輯它們。 您可以使用管線運算符， 將 RecordSet 對象傳遞至這個 Cmdlet 做為參數，或使用管線運算符。
範例
範例 1：將 A 記錄新增至記錄集
$RecordSet = Get-AzDnsRecordSet -Name www -RecordType A -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Ipv4Address 1.2.3.4
Set-AzDnsRecordSet -RecordSet $RecordSet
# You can also pipe the above sequence:
Get-AzDnsRecordSet -Name www -RecordType A -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Ipv4Address 1.2.3.4 | Set-AzDnsRecordSet本範例會將 A 記錄新增至現有的記錄集。
範例 2：將 AAAA 記錄新增至記錄集
$RecordSet = Get-AzDnsRecordSet -Name www -RecordType AAAA -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Ipv6Address 2001:DB80:4009:1803::1005
Set-AzDnsRecordSet -RecordSet $RecordSet
# You can also pipe the above sequence:
Get-AzDnsRecordSet -Name www -RecordType AAAA -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Ipv6Address 2001:DB80:4009:1803::1005 | Set-AzDnsRecordSet本範例會將AAAA記錄新增至現有的記錄集。
範例 3：將 CNAME 記錄新增至記錄集
$RecordSet = Get-AzDnsRecordSet -Name www -RecordType CNAME -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Cname contoso.com
Set-AzDnsRecordSet -RecordSet $RecordSet
# You can also pipe the above sequence:
Get-AzDnsRecordSet -Name www -RecordType CNAME -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Cname contoso.com | Set-AzDnsRecordSet本範例會將 CNAME 記錄新增至現有的記錄集。 因為 CNAME 記錄集最多可以包含一筆記錄，所以一開始必須是空的記錄集，或者必須使用 Remove-AzDnsRecordConfig 移除現有的記錄。
範例 4：將 MX 記錄新增至記錄集
$RecordSet = Get-AzDnsRecordSet -Name "@" -RecordType MX -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -Exchange mail.microsoft.com -Preference 5 -RecordSet $RecordSet
Set-AzDnsRecordSet -RecordSet $RecordSet
# You can also pipe the above sequence:
Get-AzDnsRecordSet -Name "@" -RecordType MX -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Exchange mail.microsoft.com -Preference 5 | Set-AzDnsRecordSet本範例會將 MX 記錄新增至現有的記錄集。 記錄名稱 “@” 表示區域頂點的記錄集。
範例 5：將 NS 記錄新增至記錄集
$RecordSet = Get-AzDnsRecordSet -Name abc -RecordType NS -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -Nsdname ns1.myzone.com -RecordSet $RecordSet
Set-AzDnsRecordSet -RecordSet $RecordSet
# You can also pipe the above sequence:
Get-AzDnsRecordSet -Name abc -RecordType NS -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Nsdname ns1.myzone.com | Set-AzDnsRecordSet本範例會將 NS 記錄新增至現有的記錄集。
範例 6：將 PTR 記錄新增至記錄集
$RecordSet = Get-AzDnsRecordSet -Name 4 -RecordType PTR -ResourceGroupName MyResourceGroup -ZoneName 3.2.1.in-addr.arpa
Add-AzDnsRecordConfig -Ptrdname www.contoso.com -RecordSet $RecordSet
Set-AzDnsRecordSet -RecordSet $RecordSet
# The above sequence can also be piped:
Get-AzDnsRecordSet -Name 4 -RecordType PTR -ResourceGroupName MyResourceGroup -ZoneName 3.2.1.in-addr.arpa | Add-AzDnsRecordConfig -Ptrdname www.contoso.com | Set-AzDnsRecordSet本範例會將 PTR 記錄新增至現有的記錄集。
範例 7：將 SRV 記錄新增至記錄集
$RecordSet = Get-AzDnsRecordSet -Name _sip._tcp -RecordType SRV -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Priority 0 -Weight 5 -Port 8080 -Target target.example.com
Set-AzDnsRecordSet -RecordSet $RecordSet
# The above sequence can also be piped:
Get-AzDnsRecordSet -Name _sip._tcp -RecordType SRV -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Priority 0 -Weight 5 -Port 8080 -Target target.example.com | Set-AzDnsRecordSet本範例會將 SRV 記錄新增至現有的記錄集。
範例 8：將 TXT 記錄新增至記錄集
$RecordSet = Get-AzDnsRecordSet -Name text -RecordType TXT -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Value "This is a TXT Record"
Set-AzDnsRecordSet -RecordSet $RecordSet
# The above sequence can also be piped:
Get-AzDnsRecordSet -Name text -RecordType TXT -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Value "This is a TXT Record" | Set-AzDnsRecordSet本範例會將 TXT 記錄新增至現有的記錄集。
範例 9：將 DS 記錄新增至記錄集
$RecordSet = Get-AzDnsRecordSet -Name www -RecordType DS -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -KeyTag 12345 -Algorithm 3 -DigestType 1 -Digest "49FD46E6C4B45C55D4AC"
Set-AzDnsRecordSet -RecordSet $RecordSet
# The above sequence can also be piped:
Get-AzDnsRecordSet -Name www -RecordType DS -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -KeyTag 12345 -Algorithm 3 -DigestType 1 -Digest "49FD46E6C4B45C55D4AC" | Set-AzDnsRecordSet範例 10：將 TLSA 記錄新增至記錄集
$RecordSet = Get-AzDnsRecordSet -Name _443._tcp.www -RecordType TLSA -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Usage 3 -Selector 1 -MatchingType 1 -CertificateAssociationData "49FD46E6C4B45C55D4AC"
Set-AzDnsRecordSet -RecordSet $RecordSet
# The above sequence can also be piped:
Get-AzDnsRecordSet -Name _443._tcp.www -RecordType TLSA -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Usage 3 -Selector 1 -MatchingType 1 -CertificateAssociationData "49FD46E6C4B45C55D4AC" | Set-AzDnsRecordSet參數
-Algorithm
要加入之 DS 記錄的演算法欄位。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-CaaFlags
要新增之 CAA 記錄的旗標。 必須是介於 0 到 255 之間的數位。
| Type: | Byte |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-CaaTag
要新增之 CAA 記錄的標記欄位。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-CaaValue
要新增之 CAA 記錄的值欄位。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-CertificateAssociationData
要新增之 TLSA 記錄的憑證關聯數據欄位。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Cname
指定標準名稱 （CNAME） 記錄的功能變數名稱。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DefaultProfile
用於與 azure 通訊的認證、帳戶、租用戶和訂用帳戶
| Type: | IAzureContextContainer |
| Aliases: | AzContext, AzureRmContext, AzureCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Digest
要新增之 DS 記錄的摘要欄位。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DigestType
要加入之 DS 記錄的摘要類型欄位。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Exchange
指定郵件交換 （MX） 記錄的郵件交換伺服器名稱。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Ipv4Address
指定 A 記錄的 IPv4 位址。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Ipv6Address
指定AAAA記錄的IPv6位址。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-KeyTag
要新增之 DS 記錄的索引鍵標記欄位。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-MatchingType
要新增之 TLSA 記錄的相符類型欄位。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Nsdname
指定名稱伺服器 （NS） 記錄的名稱伺服器名稱。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Port
指定服務 （SRV） 記錄的埠。
| Type: | UInt16 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Preference
指定 MX 記錄的喜好設定。
| Type: | UInt16 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Priority
指定 SRV 記錄的優先順序。
| Type: | UInt16 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Ptrdname
指定指標資源 （PTR） 記錄的目標功能變數名稱。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-RecordSet
指定要編輯的 RecordSet 物件。
| Type: | DnsRecordSet |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Selector
要新增之 TLSA 記錄的選取器欄位。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Target
指定 SRV 記錄的目標。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Usage
要新增之 TLSA 記錄的使用方式欄位。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Value
指定 TXT 記錄的值。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Weight
指定 SRV 記錄的權數。
| Type: | UInt16 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
輸入
輸出
相關連結
意見反應
即將登場：在 2024 年，我們將逐步淘汰 GitHub 問題作為內容的意見反應機制，並將它取代為新的意見反應系統。 如需詳細資訊，請參閱：https://aka.ms/ContentUserFeedback。
提交並檢視相關的意見反應