編輯

共用方式為


Set-CsLisSwitch

Creates a Location Information Server (LIS) switch, creates an association between a switch and a location (creating a new location if that location doesn't exist), or modifies an existing switch and its associated location. The association between a switch and location is used in an Enhanced 9-1-1 (E9-1-1) Enterprise Voice implementation to notify an emergency services operator of the caller's location. This cmdlet was introduced in Lync Server 2010.

Syntax

Set-CsLisSwitch
   -ChassisID <String>
   [-City <String>]
   [-CompanyName <String>]
   [-Country <String>]
   [-Description <String>]
   [-HouseNumber <String>]
   [-HouseNumberSuffix <String>]
   [-Location <String>]
   [-PostalCode <String>]
   [-PostDirectional <String>]
   [-PreDirectional <String>]
   [-State <String>]
   [-StreetName <String>]
   [-StreetSuffix <String>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CsLisSwitch
   -ChassisID <String>
   [-Description <String>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CsLisSwitch
   -City <String>
   -CompanyName <String>
   -Country <String>
   -HouseNumber <String>
   -HouseNumberSuffix <String>
   -Location <String>
   -PostalCode <String>
   -PostDirectional <String>
   -PreDirectional <String>
   -State <String>
   -StreetName <String>
   -StreetSuffix <String>
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

Enhanced 9-1-1 allows an emergency operator to identify the location of a caller without having to ask the caller for that information. In the case where a caller is calling from a Voice over Internet Protocol (VoIP) connection, that information must be extracted based on various connection factors. The VoIP administrator must configure a location map (called a wiremap) that will determine a caller's location. This cmdlet allows the administrator to map physical locations to the network switch through which the client is connected.

The ChassisID parameter is the only required parameter for this cmdlet. If you enter a ChassisID value that already exists, this cmdlet will update the location for that switch based on the location parameters that are supplied. If the ChassisID does not exist, a new switch location will be created.

If a location with an address exactly matching the address parameters entered here (including null values) does not exist in the location database, a new address will be created based on the parameters entered with this cmdlet. (You can retrieve a list of locations by calling the Get-CsLisLocation cmdlet.) The Set-CsLisSwitch cmdlet does not require or prompt for location parameters; you can create a switch entry without associating it with a location. It's also possible to create an invalid location with this cmdlet. A valid location consists of, at minimum, the Location, HouseNumber, StreetName, City, State and Country. If you do not supply all of these parameters, calls that are received by the referenced switch may not contain the information required by the emergency operator (depending on whether valid settings are available for a subnet or wireless access point that can be used in place of switch settings). It is recommended that you be as specific as possible with the location parameters and fill in as many as possible.

Note that switch entries can also be created by calling the Set-CsLisPort cmdlet. If the Set-CsLisPort cmdlet is called with a ChassisID value that does not have an existing switch entry, that switch will be created.

It's important to note that these changes will take effect only if you have configured the MACResolverUrl property using the New-CsWebServiceConfiguration cmdlet or the Set-CsWebServiceConfiguration cmdlet. The MACResolverUrl property specifies the URL for a web service that is capable of taking an IP address and determining the Media Access Control (MAC) address of the network card associated with that IP address.

Examples

-------------------------- Example 1 --------------------------

Set-CsLisSwitch -ChassisID 99-99-99-99-99-99

Example 1 creates or updates a LIS switch location entry. The command in this example includes only one (required) parameter: ChassisID. The value of the ChassisID is the MAC address of the switch, in this case 99-99-99-99-99-99.

Notice that this example does not include any address information. It's possible to create a switch entry on the Location Information Server without associating it with an address. However, emergency calls routed through this switch may not (depending on subnet or port locations that have been defined) contain enough information for the emergency operator to identify a location.

IMPORTANT: If a LIS switch location with this ChassisID already exists, it will be replaced by the values in this command. That means that if this switch were associated with an address (a physical location), that association would no longer exist because we didn't include any location information in this command. The location will still exist in the location database, but it will not be associated with this switch.

-------------------------- Example 2 --------------------------

Set-CsLisSwitch -ChassisID 99-99-99-99-99-99 -Location "30/1000" -HouseNumber 1234 -PreDirectional NE -StreetName First -StreetSuffix Avenue -City Redmond -State WA -Country US -PostalCode 99999

Example 2 updates the switch created in Example 1 by adding address information. (This is actually deleting the existing entry and replacing it with this new entry.) If the address does not exist in the location database, this cmdlet will create that location.

Parameters

-ChassisID

The Media Access Control (MAC) address of the network switch. This value must be in the form nn-nn-nn-nn-nn-nn, such as 12-34-56-78-90-ab, or in the form of an IP address. If an entry with the specified ChassisID value does not exist, a new switch location will be created. If an entry with the specified ChassisID does exist, that entry will be replaced.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-City

The location city.

Maximum length: 64 characters.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-CompanyName

The name of the company at this location.

Maximum length: 60 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-Confirm

Prompts you for confirmation before executing the command.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-Country

The country/region this location is in.

Maximum length: 2 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-Description

A detailed description of this network switch location.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-HouseNumber

The house number of the location. For a company this is the number on the street where the company is located.

Maximum length: 10 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-HouseNumberSuffix

Additional information for the house number, such as 1/2 or A. For example, 1234 1/2 Oak Street or 1234 A Elm Street.

Note: To designate an apartment number or office suite, you must use the Location parameter. For example, -Location "Suite 100/Office 150".

Maximum length: 5 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-Location

The name for this location. Typically this value is the name of a location more specific than the civic address, such as an office number, but it can be any string value.

Maximum length: 20 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-PostalCode

The postal code associated with this location.

Maximum length: 10 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-PostDirectional

The directional designation of a street name. For example, NE or NW for Main Street NE or 7th Avenue NW.

Maximum length: 2 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-PreDirectional

The directional designation for a street name that precedes the name of the street. For example, NE or NW for NE Main Street or NW 7th Avenue.

Maximum length: 2 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-State

The state or province associated with this location.

Maximum length: 2 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-StreetName

The name of the street for this location.

Maximum length: 60 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-StreetSuffix

The type of street designated in a street name, such as Street, Avenue, or Court.

Maximum length: 10 characters

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

-WhatIf

Describes what would happen if you executed the command without actually executing the command.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Lync Server 2010, Lync Server 2013, Skype for Business Server 2015, Skype for Business Server 2019

Inputs

Accepts pipelined input of LIS switch objects.

Outputs

This cmdlet creates or modifies an object of type System.Management.Automation.PSCustomObject.