編輯

共用方式為


Creating a Windows PowerShell Container Provider

This topic describes how to create a Windows PowerShell provider that can work on multi-layer data stores. For this type of data store, the top level of the store contains the root items and each subsequent level is referred to as a node of child items. By allowing the user to work on these child nodes, a user can interact hierarchically through the data store.

Providers that can work on multi-level data stores are referred to as Windows PowerShell container providers. However, be aware that a Windows PowerShell container provider can be used only when there is one container (no nested containers) with items in it. If there are nested containers, then you must implement a Windows PowerShell navigation provider. For more information about implementing Windows PowerShell navigation provider, see Creating a Windows PowerShell Navigation Provider.

Note

You can download the C# source file (AccessDBSampleProvider04.cs) for this provider using the Microsoft Windows Software Development Kit for Windows Vista and .NET Framework 3.0 Runtime Components. For download instructions, see How to Install Windows PowerShell and Download the Windows PowerShell SDK. The downloaded source files are available in the <PowerShell Samples> directory. For more information about other Windows PowerShell provider implementations, see Designing Your Windows PowerShell Provider.

The Windows PowerShell container provider described here defines the database as its single container, with the tables and rows of the database defined as items of the container.

Caution

Be aware that this design assumes a database that has a field with the name ID, and that the type of the field is LongInteger.

Defining a Windows PowerShell Container Provider Class

A Windows PowerShell container provider must define a .NET class that derives from the System.Management.Automation.Provider.Containercmdletprovider base class. Here is the class definition for the Windows PowerShell container provider described in this section.

[CmdletProvider("AccessDB", ProviderCapabilities.None)]
public class AccessDBProvider : ContainerCmdletProvider

Notice that in this class definition, the System.Management.Automation.Provider.Cmdletproviderattribute attribute includes two parameters. The first parameter specifies a user-friendly name for the provider that is used by Windows PowerShell. The second parameter specifies the Windows PowerShell specific capabilities that the provider exposes to the Windows PowerShell runtime during command processing. For this provider, there are no Windows PowerShell specific capabilities that are added.

Defining Base Functionality

As described in Designing Your Windows PowerShell Provider, the System.Management.Automation.Provider.Containercmdletprovider class derives from several other classes that provided different provider functionality. A Windows PowerShell container provider, therefore, needs to define all of the functionality provided by those classes.

To implement functionality for adding session-specific initialization information and for releasing resources that are used by the provider, see Creating a Basic Windows PowerShell Provider. However, most providers (including the provider described here) can use the default implementation of this functionality that is provided by Windows PowerShell.

To get access to the data store, the provider must implement the methods of the System.Management.Automation.Provider.Drivecmdletprovider base class. For more information about implementing these methods, see Creating a Windows PowerShell Drive Provider.

To manipulate the items of a data store, such as getting, setting, and clearing items, the provider must implement the methods provided by the System.Management.Automation.Provider.Itemcmdletprovider base class. For more information about implementing these methods, see Creating a Windows PowerShell Item Provider.

Retrieving Child Items

To retrieve a child item, the Windows PowerShell container provider must override the System.Management.Automation.Provider.Containercmdletprovider.Getchilditems* method to support calls from the Get-ChildItem cmdlet. This method retrieves child items from the data store and writes them to the pipeline as objects. If the recurse parameter of the cmdlet is specified, the method retrieves all children regardless of what level they are at. If the recurse parameter is not specified, the method retrieves only a single level of children.

Here is the implementation of the System.Management.Automation.Provider.Containercmdletprovider.Getchilditems* method for this provider. Notice that this method retrieves the child items in all database tables when the path indicates the Access database, and retrieves the child items from the rows of that table if the path indicates a data table.

protected override void GetChildItems(string path, bool recurse)
{
    // If path represented is a drive then the children in the path are 
    // tables. Hence all tables in the drive represented will have to be
    // returned
    if (PathIsDrive(path))
    {
        foreach (DatabaseTableInfo table in GetTables())
        {
            WriteItemObject(table, path, true);

            // if the specified item exists and recurse has been set then 
            // all child items within it have to be obtained as well
            if (ItemExists(path) && recurse)
            {
                GetChildItems(path + pathSeparator + table.Name, recurse);
            }
        } // foreach (DatabaseTableInfo...
    } // if (PathIsDrive...
    else
    {
        // Get the table name, row number and type of path from the
        // path specified
        string tableName;
        int rowNumber;

        PathType type = GetNamesFromPath(path, out tableName, out rowNumber);

        if (type == PathType.Table)
        {
            // Obtain all the rows within the table
            foreach (DatabaseRowInfo row in GetRows(tableName))
            {
                WriteItemObject(row, path + pathSeparator + row.RowNumber,
                        false);
            } // foreach (DatabaseRowInfo...
        }
        else if (type == PathType.Row)
        {
            // In this case the user has directly specified a row, hence
            // just give that particular row
            DatabaseRowInfo row = GetRow(tableName, rowNumber);
            WriteItemObject(row, path + pathSeparator + row.RowNumber,
                        false);
        }
        else
        {
            // In this case, the path specified is not valid
            ThrowTerminatingInvalidPathException(path);
        }
    } // else
} // GetChildItems

Things to Remember About Implementing GetChildItems

The following conditions may apply to your implementation of System.Management.Automation.Provider.Containercmdletprovider.Getchilditems*:

Attaching Dynamic Parameters to the Get-ChildItem Cmdlet

Sometimes the Get-ChildItem cmdlet that calls System.Management.Automation.Provider.Containercmdletprovider.Getchilditems* requires additional parameters that are specified dynamically at runtime. To provide these dynamic parameters, the Windows PowerShell container provider must implement the System.Management.Automation.Provider.Containercmdletprovider.Getchilditemsdynamicparameters* method. This method retrieves dynamic parameters for the item at the indicated path and returns an object that has properties and fields with parsing attributes similar to a cmdlet class or a System.Management.Automation.Runtimedefinedparameterdictionary object. The Windows PowerShell runtime uses the returned object to add the parameters to the Get-ChildItem cmdlet.

This Windows PowerShell container provider does not implement this method. However, the following code is the default implementation of this method.

Retrieving Child Item Names

To retrieve the names of child items, the Windows PowerShell container provider must override the System.Management.Automation.Provider.Containercmdletprovider.Getchildnames* method to support calls from the Get-ChildItem cmdlet when its Name parameter is specified. This method retrieves the names of the child items for the specified path or child item names for all containers if the returnAllContainers parameter of the cmdlet is specified. A child name is the leaf portion of a path. For example, the child name for the path c:\windows\system32\abc.dll is "abc.dll". The child name for the directory c:\windows\system32 is "system32".

Here is the implementation of the System.Management.Automation.Provider.Containercmdletprovider.Getchildnames* method for this provider. Notice that the method retrieves table names if the specified path indicates the Access database (drive) and row numbers if the path indicates a table.

protected override void GetChildNames(string path,
                              ReturnContainers returnContainers)
{
    // If the path represented is a drive, then the child items are
    // tables. get the names of all the tables in the drive.
    if (PathIsDrive(path))
    {
        foreach (DatabaseTableInfo table in GetTables())
        {
            WriteItemObject(table.Name, path, true);
        } // foreach (DatabaseTableInfo...
    } // if (PathIsDrive...
    else
    {
        // Get type, table name and row number from path specified
        string tableName;
        int rowNumber;

        PathType type = GetNamesFromPath(path, out tableName, out rowNumber);

        if (type == PathType.Table)
        {
            // Get all the rows in the table and then write out the 
            // row numbers.
            foreach (DatabaseRowInfo row in GetRows(tableName))
            {
                WriteItemObject(row.RowNumber, path, false);
            } // foreach (DatabaseRowInfo...
        }
        else if (type == PathType.Row)
        {
            // In this case the user has directly specified a row, hence
            // just give that particular row
            DatabaseRowInfo row = GetRow(tableName, rowNumber);

            WriteItemObject(row.RowNumber, path, false);
        }
        else
        {
            ThrowTerminatingInvalidPathException(path);
        }
    } // else
} // GetChildNames

Things to Remember About Implementing GetChildNames

The following conditions may apply to your implementation of System.Management.Automation.Provider.Containercmdletprovider.Getchilditems*:

Attaching Dynamic Parameters to the Get-ChildItem Cmdlet (Name)

Sometimes the Get-ChildItem cmdlet (with the Name parameter) requires additional parameters that are specified dynamically at runtime. To provide these dynamic parameters, the Windows PowerShell container provider must implement the System.Management.Automation.Provider.Containercmdletprovider.Getchildnamesdynamicparameters* method. This method retrieves the dynamic parameters for the item at the indicated path and returns an object that has properties and fields with parsing attributes similar to a cmdlet class or a System.Management.Automation.Runtimedefinedparameterdictionary object. The Windows PowerShell runtime uses the returned object to add the parameters to the Get-ChildItem cmdlet.

This provider does not implement this method. However, the following code is the default implementation of this method.

Renaming Items

To rename an item, a Windows PowerShell container provider must override the System.Management.Automation.Provider.Containercmdletprovider.Renameitem* method to support calls from the Rename-Item cmdlet. This method changes the name of the item at the specified path to the new name provided. The new name must always be relative to the parent item (container).

This provider does not override the System.Management.Automation.Provider.Containercmdletprovider.Renameitem* method. However, the following is the default implementation.

Things to Remember About Implementing RenameItem

The following conditions may apply to your implementation of System.Management.Automation.Provider.Containercmdletprovider.Renameitem*:

Attaching Dynamic Parameters to the Rename-Item Cmdlet

Sometimes the Rename-Item cmdlet requires additional parameters that are specified dynamically at runtime. To provide these dynamic parameters, Windows PowerShell container provider must implement the System.Management.Automation.Provider.Containercmdletprovider.Renameitemdynamicparameters* method. This method retrieves the parameters for the item at the indicated path and returns an object that has properties and fields with parsing attributes similar to a cmdlet class or a System.Management.Automation.Runtimedefinedparameterdictionary object. The Windows PowerShell runtime uses the returned object to add the parameters to the Rename-Item cmdlet.

This container provider does not implement this method. However, the following code is the default implementation of this method.

Creating New Items

To create new items, a container provider must implement the System.Management.Automation.Provider.Containercmdletprovider.Newitem* method to support calls from the New-Item cmdlet. This method creates a data item located at the specified path. The type parameter of the cmdlet contains the provider-defined type for the new item. For example, the FileSystem provider uses a type parameter with a value of "file" or "directory". The newItemValue parameter of the cmdlet specifies a provider-specific value for the new item.

Here is the implementation of the System.Management.Automation.Provider.Containercmdletprovider.Newitem* method for this provider.

protected override void NewItem( string path, string type, object newItemValue )
{
    // Create the new item here after
    // performing necessary validations
    //
    // WriteItemObject(newItemValue, path, false);

    // Example
    //
    // if (ShouldProcess(path, "new item"))
    // {
    //      // Create a new item and then call WriteObject
    //      WriteObject(newItemValue, path, false);
    // }

} // NewItem
{
    case 1:
        {
            string name = pathChunks[0];

            if (TableNameIsValid(name))
            {
                tableName = name;
                retVal = PathType.Table;
            }
        }
        break;

    case 2:
        {
            string name = pathChunks[0];

Things to Remember About Implementing NewItem

The following conditions may apply to your implementation of System.Management.Automation.Provider.Containercmdletprovider.Newitem*:

Attaching Dynamic Parameters to the New-Item Cmdlet

Sometimes the New-Item cmdlet requires additional parameters that are specified dynamically at runtime. To provide these dynamic parameters, the container provider must implement the System.Management.Automation.Provider.Containercmdletprovider.Newitemdynamicparameters* method. This method retrieves the parameters for the item at the indicated path and returns an object that has properties and fields with parsing attributes similar to a cmdlet class or a System.Management.Automation.Runtimedefinedparameterdictionary object. The Windows PowerShell runtime uses the returned object to add the parameters to the New-Item cmdlet.

This provider does not implement this method. However, the following code is the default implementation of this method.

Removing Items

To remove items, the Windows PowerShell provider must override the System.Management.Automation.Provider.Containercmdletprovider.Removeitem* method to support calls from the Remove-Item cmdlet. This method deletes an item from the data store at the specified path. If the recurse parameter of the Remove-Item cmdlet is set to true, the method removes all child items regardless of their level. If the parameter is set to false, the method removes only a single item at the specified path.

This provider does not support item removal. However, the following code is the default implementation of System.Management.Automation.Provider.Containercmdletprovider.Removeitem*.

Things to Remember About Implementing RemoveItem

The following conditions may apply to your implementation of System.Management.Automation.Provider.Containercmdletprovider.Newitem*:

Attaching Dynamic Parameters to the Remove-Item Cmdlet

Sometimes the Remove-Item cmdlet requires additional parameters that are specified dynamically at runtime. To provide these dynamic parameters, the container provider must implement the System.Management.Automation.Provider.Containercmdletprovider.Removeitemdynamicparameters* method to handle these parameters. This method retrieves the dynamic parameters for the item at the indicated path and returns an object that has properties and fields with parsing attributes similar to a cmdlet class or a System.Management.Automation.Runtimedefinedparameterdictionary object. The Windows PowerShell runtime uses the returned object to add the parameters to the Remove-Item cmdlet.

This container provider does not implement this method. However, the following code is the default implementation of System.Management.Automation.Provider.Containercmdletprovider.Removeitemdynamicparameters*.

Querying for Child Items

To check to see if child items exist at the specified path, the Windows PowerShell container provider must override the System.Management.Automation.Provider.Containercmdletprovider.Haschilditems* method. This method returns true if the item has children, and false otherwise. For a null or empty path, the method considers any items in the data store to be children and returns true.

Here is the override for the System.Management.Automation.Provider.Containercmdletprovider.Haschilditems* method. If there are more than two path parts created by the ChunkPath helper method, the method returns false, since only a database container and a table container are defined. For more information about this helper method, see the ChunkPath method is discussed in Creating a Windows PowerShell Item Provider.

protected override bool HasChildItems( string path )
{
    return false;
} // HasChildItems
        ErrorCategory.InvalidOperation, tableName));
}

return results;

Things to Remember About Implementing HasChildItems

The following conditions may apply to your implementation of System.Management.Automation.Provider.Containercmdletprovider.Haschilditems*:

Copying Items

To copy items, the container provider must implement the System.Management.Automation.Provider.ContainerCmdletProvider.CopyItem method to support calls from the Copy-Item cmdlet. This method copies a data item from the location indicated by the path parameter of the cmdlet to the location indicated by the copyPath parameter. If the recurse parameter is specified, the method copies all sub-containers. If the parameter is not specified, the method copies only a single level of items.

This provider does not implement this method. However, the following code is the default implementation of System.Management.Automation.Provider.ContainerCmdletProvider.CopyItem.

Things to Remember About Implementing CopyItem

The following conditions may apply to your implementation of System.Management.Automation.Provider.ContainerCmdletProvider.CopyItem:

Attaching Dynamic Parameters to the Copy-Item Cmdlet

Sometimes the Copy-Item cmdlet requires additional parameters that are specified dynamically at runtime. To provide these dynamic parameters, the Windows PowerShell container provider must implement the System.Management.Automation.Provider.Containercmdletprovider.Copyitemdynamicparameters* method to handle these parameters. This method retrieves the parameters for the item at the indicated path and returns an object that has properties and fields with parsing attributes similar to a cmdlet class or a System.Management.Automation.Runtimedefinedparameterdictionary object. The Windows PowerShell runtime uses the returned object to add the parameters to the Copy-Item cmdlet.

This provider does not implement this method. However, the following code is the default implementation of System.Management.Automation.Provider.Containercmdletprovider.Copyitemdynamicparameters*.

Code Sample

For complete sample code, see AccessDbProviderSample04 Code Sample.

Building the Windows PowerShell Provider

See How to Register Cmdlets, Providers, and Host Applications.

Testing the Windows PowerShell Provider

When your Windows PowerShell provider has been registered with Windows PowerShell, you can test it by running the supported cmdlets on the command line. Be aware that the following example output uses a fictitious Access database.

  1. Run the Get-ChildItem cmdlet to retrieve the list of child items from a Customers table in the Access database.

    Get-ChildItem mydb:customers
    

    The following output appears.

    PSPath        : AccessDB::customers
    PSDrive       : mydb
    PSProvider    : System.Management.Automation.ProviderInfo
    PSIsContainer : True
    Data          : System.Data.DataRow
    Name          : Customers
    RowCount      : 91
    Columns       :
    
  2. Run the Get-ChildItem cmdlet again to retrieve the data of a table.

    (Get-ChildItem mydb:customers).data
    

    The following output appears.

    TABLE_CAT   : c:\PS\northwind
    TABLE_SCHEM :
    TABLE_NAME  : Customers
    TABLE_TYPE  : TABLE
    REMARKS     :
    
  3. Now use the Get-Item cmdlet to retrieve the items at row 0 in the data table.

    Get-Item mydb:\customers\0
    

    The following output appears.

    PSPath        : AccessDB::customers\0
    PSDrive       : mydb
    PSProvider    : System.Management.Automation.ProviderInfo
    PSIsContainer : False
    Data          : System.Data.DataRow
    RowNumber     : 0
    
  4. Reuse Get-Item to retrieve the data for the items in row 0.

    (Get-Item mydb:\customers\0).data
    

    The following output appears.

    CustomerID   : 1234
    CompanyName  : Fabrikam
    ContactName  : Eric Gruber
    ContactTitle : President
    Address      : 4567 Main Street
    City         : Buffalo
    Region       : NY
    PostalCode   : 98052
    Country      : USA
    Phone        : (425) 555-0100
    Fax          : (425) 555-0101
    
  5. Now use the New-Item cmdlet to add a row to an existing table. The Path parameter specifies the full path to the row, and must indicate a row number that is greater than the existing number of rows in the table. The Type parameter indicates "row" to specify that type of item to add. Finally, the Value parameter specifies a comma-delimited list of column values for the row.

    New-Item -Path mydb:\Customers\3 -ItemType "row" -Value "3,CustomerFirstName,CustomerLastName,CustomerEmailAddress,CustomerTitle,CustomerCompany,CustomerPhone, CustomerAddress,CustomerCity,CustomerState,CustomerZip,CustomerCountry"
    
  6. Verify the correctness of the new item operation as follows.

    PS mydb:\> cd Customers
    PS mydb:\Customers> (Get-Item 3).data
    

    The following output appears.

    ID        : 3
    FirstName : Eric
    LastName  : Gruber
    Email     : ericgruber@fabrikam.com
    Title     : President
    Company   : Fabrikam
    WorkPhone : (425) 555-0100
    Address   : 4567 Main Street
    City      : Buffalo
    State     : NY
    Zip       : 98052
    Country   : USA
    

See Also

Creating Windows PowerShell Providers

Designing Your Windows PowerShell Provider

Implementing an Item Windows PowerShell Provider

Implementing a Navigation Windows PowerShell Provider

How to Register Cmdlets, Providers, and Host Applications

Windows PowerShell SDK

Windows PowerShell Programmer's Guide