逐步解說:在啟用 COM 的應用程式中使用並行執行階段
本文件示範如何在採用元件物件模型 (COM) 的應用程式中使用並行執行階段。
必要條件
在您開始閱讀此逐步解說前,請先參閱下列文件:
如需 COM 的詳細資訊,請參閱元件物件模型 (COM)。
管理 COM 程式庫的存留期
雖然 COM 與並行執行階段的搭配使用會遵循與任何其他並行機制相同的原則,但是下列方針可協助您有效地一起使用這些程式庫。
執行緒必須在使用 COM 程式庫前先呼叫 CoInitializeEx。
執行緒可以多次呼叫 CoInitializeEx,只要它在每一次呼叫時提供相同的引數即可。
針對 CoInitializeEx 的每一次呼叫,執行緒還必須呼叫 CoUninitialize。 換句話說,對 CoInitializeEx 和 CoUninitialize 的呼叫必須平衡。
若要從某個執行緒 Apartment 切換至另一個執行緒 Apartment,執行緒必須在呼叫具有新執行緒規格的 CoInitializeEx 之前,先完全釋放 COM 程式庫。
當 COM 與並行執行階段搭配使用時,其他 COM 原則適用。 例如,在單一執行緒 Apartment (STA) 中建立物件並將該物件封送處理至另一個 Apartment 的應用程式,也必須提供訊息迴圈以處理傳入訊息。 另外請記得 Apartment 之間的物件封送處理會導致效能降低。
搭配使用 COM 與平行模式程式庫
當您搭配使用 COM 與平行模式程式庫 (PPL) 中的元件 (例如,工作群組或平行演算法) 時,請在您於每一項工作或反覆運算期間使用 COM 程式庫之前呼叫 CoInitializeEx,並且在每一項工作或反覆運算完成前呼叫 CoUninitialize。 下列範例示範如何管理存留期與 COM 程式庫的 concurrency::structured_task_group 物件。
structured_task_group tasks;
// Create and run a task.
auto task = make_task([] {
// Initialize the COM library on the current thread.
CoInitializeEx(NULL, COINIT_MULTITHREADED);
// TODO: Perform task here.
// Free the COM library.
CoUninitialize();
});
tasks.run(task);
// TODO: Run additional tasks here.
// Wait for the tasks to finish.
tasks.wait();
您必須確定在取消工作或平行演算法時或是在工作主體擲回例外狀況時,已正確地釋放 COM 程式庫。 若要保證工作在其結束前呼叫 CoUninitialize,請使用 try-finally 區塊或「資源擷取為初始設定」(Resource Acquisition Is Initialization,RAII) 模式。 下列範例會在工作完成或取消時,或是在例外狀況擲回時,使用 try-finally 區塊來釋放 COM 程式庫。
structured_task_group tasks;
// Create and run a task.
auto task = make_task([] {
bool coinit = false;
__try {
// Initialize the COM library on the current thread.
CoInitializeEx(NULL, COINIT_MULTITHREADED);
coinit = true;
// TODO: Perform task here.
}
__finally {
// Free the COM library.
if (coinit)
CoUninitialize();
}
});
tasks.run(task);
// TODO: Run additional tasks here.
// Wait for the tasks to finish.
tasks.wait();
下列範例使用 RAII 模式來定義 CCoInitializer 類別,而該類別可在指定的範圍內管理 COM 程式庫的存留期。
// An exception-safe wrapper class that manages the lifetime
// of the COM library in a given scope.
class CCoInitializer
{
public:
explicit CCoInitializer(DWORD dwCoInit = COINIT_APARTMENTTHREADED)
: _coinitialized(false)
{
// Initialize the COM library on the current thread.
HRESULT hr = CoInitializeEx(NULL, dwCoInit);
if (FAILED(hr))
throw hr;
_coinitialized = true;
}
~CCoInitializer()
{
// Free the COM library.
if (_coinitialized)
CoUninitialize();
}
private:
// Flags whether COM was properly initialized.
bool _coinitialized;
// Hide copy constructor and assignment operator.
CCoInitializer(const CCoInitializer&);
CCoInitializer& operator=(const CCoInitializer&);
};
您可以使用 CCoInitializer 類別,在工作結束時自動釋放 COM 程式庫,如下所述。
structured_task_group tasks;
// Create and run a task.
auto task = make_task([] {
// Enable COM for the lifetime of the task.
CCoInitializer coinit(COINIT_MULTITHREADED);
// TODO: Perform task here.
// The CCoInitializer object frees the COM library
// when the task exits.
});
tasks.run(task);
// TODO: Run additional tasks here.
// Wait for the tasks to finish.
tasks.wait();
如需在並行執行階段中取消作業的詳細資訊,請參閱PPL 中的取消。
搭配使用 COM 與非同步代理程式
當您使用 COM 與非同步代理程式時,呼叫CoInitializeEx在使用中的 COM 程式庫之前 concurrency::agent::run 您的代理程式的方法。 然後在 run 方法傳回前呼叫 CoUninitialize。 請勿在建構函式或解構函式,您的代理程式的 COM 管理常式,並不會覆寫 concurrency::agent::start 或 concurrency::agent:: 完成方法會從不同的執行緒比呼叫這些方法,因為run方法。
下列範例會顯示一個名為 CCoAgent 的基本代理程式,而該代理程式可以在 run 方法中管理 COM 程式庫。
class CCoAgent : public agent
{
protected:
void run()
{
// Initialize the COM library on the current thread.
CoInitializeEx(NULL, COINIT_MULTITHREADED);
// TODO: Perform work here.
// Free the COM library.
CoUninitialize();
// Set the agent to the finished state.
done();
}
};
本逐步解說稍後會提供完整的範例。
搭配使用 COM 與輕量型工作
工作排程器 (並行執行階段) 這份文件說明輕量型工作在並行執行階段中的角色。 您可以搭配使用 COM 與輕量型工作,就像搭配您在 Windows API 中傳遞至 CreateThread 函式的任何執行緒常式一樣。 這在下列範例中顯示。
// A basic lightweight task that you schedule directly from a
// Scheduler or ScheduleGroup object.
void ThreadProc(void* data)
{
// Initialize the COM library on the current thread.
CoInitializeEx(NULL, COINIT_MULTITHREADED);
// TODO: Perform work here.
// Free the COM library.
CoUninitialize();
}
啟用 COM 的應用程式範例
本節顯示啟用 COM 的完整應用程式,而該應用程式會使用 IScriptControl 介面來執行可計算第 n 個 Fibonacci 數字的指令碼。 這個範例會先從主執行緒呼叫指令碼,然後使用 PPL 與代理程式同時呼叫指令碼。
請考慮下列 Helper 函式 RunScriptProcedure,這個函式會在 IScriptControl 物件中呼叫一個程序。
// Calls a procedure in an IScriptControl object.
template<size_t ArgCount>
_variant_t RunScriptProcedure(IScriptControlPtr pScriptControl,
_bstr_t& procedureName, array<_variant_t, ArgCount>& arguments)
{
// Create a 1-dimensional, 0-based safe array.
SAFEARRAYBOUND rgsabound[] = { ArgCount, 0 };
CComSafeArray<VARIANT> sa(rgsabound, 1U);
// Copy the arguments to the safe array.
LONG lIndex = 0;
for_each(begin(arguments), end(arguments), [&](_variant_t& arg) {
HRESULT hr = sa.SetAt(lIndex, arg);
if (FAILED(hr))
throw hr;
++lIndex;
});
// Call the procedure in the script.
return pScriptControl->Run(procedureName, &sa.m_psa);
}
wmain 函式會建立 IScriptControl 物件,加入可計算第 n 個 Fibonacci 數字的指令碼,然後呼叫 RunScriptProcedure 函式以執行該指令碼。
int wmain()
{
HRESULT hr;
// Enable COM on this thread for the lifetime of the program.
CCoInitializer coinit(COINIT_MULTITHREADED);
// Create the script control.
IScriptControlPtr pScriptControl(__uuidof(ScriptControl));
// Set script control properties.
pScriptControl->Language = "JScript";
pScriptControl->AllowUI = TRUE;
// Add script code that computes the nth Fibonacci number.
hr = pScriptControl->AddCode(
"function fib(n) { if (n<2) return n; else return fib(n-1) + fib(n-2); }" );
if (FAILED(hr))
return hr;
// Test the script control by computing the 15th Fibonacci number.
wcout << endl << L"Main Thread:" << endl;
LONG lValue = 15;
array<_variant_t, 1> args = { _variant_t(lValue) };
_variant_t result = RunScriptProcedure(
pScriptControl,
_bstr_t("fib"),
args);
// Print the result.
wcout << L"fib(" << lValue << L") = " << result.lVal << endl;
return S_OK;
}
從 PPL 呼叫指令碼
下列函式, ParallelFibonacci,會使用 concurrency::parallel_for 演算法,以呼叫平行的指令碼。 此函式使用 CCoInitializer 類別管理 COM 程式庫在工作的每次反覆運算期間內的存留期。
// Computes multiple Fibonacci numbers in parallel by using
// the parallel_for algorithm.
HRESULT ParallelFibonacci(IScriptControlPtr pScriptControl)
{
try {
parallel_for(10L, 20L, [&pScriptControl](LONG lIndex)
{
// Enable COM for the lifetime of the task.
CCoInitializer coinit(COINIT_MULTITHREADED);
// Call the helper function to run the script procedure.
array<_variant_t, 1> args = { _variant_t(lIndex) };
_variant_t result = RunScriptProcedure(
pScriptControl,
_bstr_t("fib"),
args);
// Print the result.
wstringstream ss;
ss << L"fib(" << lIndex << L") = " << result.lVal << endl;
wcout << ss.str();
});
}
catch (HRESULT hr) {
return hr;
}
return S_OK;
}
若要將 ParallelFibonacci 函式用於此範例,請在 wmain 函式傳回前加入下列程式碼。
// Use the parallel_for algorithm to compute multiple
// Fibonacci numbers in parallel.
wcout << endl << L"Parallel Fibonacci:" << endl;
if (FAILED(hr = ParallelFibonacci(pScriptControl)))
return hr;
從代理程式呼叫指令碼
下列範例顯示的 FibonacciScriptAgent 類別會呼叫指令碼程序來計算第 n 個 Fibonacci 數字。 FibonacciScriptAgent 類別會利用訊息傳遞將來自主程式的輸入值接收到指令碼函式。 run 方法可管理 COM 程式庫在整個工作期間內的留存期。
// A basic agent that calls a script procedure to compute the
// nth Fibonacci number.
class FibonacciScriptAgent : public agent
{
public:
FibonacciScriptAgent(IScriptControlPtr pScriptControl, ISource<LONG>& source)
: _pScriptControl(pScriptControl)
, _source(source) { }
public:
// Retrieves the result code.
HRESULT GetHRESULT()
{
return receive(_result);
}
protected:
void run()
{
// Initialize the COM library on the current thread.
CoInitializeEx(NULL, COINIT_MULTITHREADED);
// Read values from the message buffer until
// we receive the sentinel value.
LONG lValue;
while ((lValue = receive(_source)) != Sentinel)
{
try {
// Call the helper function to run the script procedure.
array<_variant_t, 1> args = { _variant_t(lValue) };
_variant_t result = RunScriptProcedure(
_pScriptControl,
_bstr_t("fib"),
args);
// Print the result.
wstringstream ss;
ss << L"fib(" << lValue << L") = " << result.lVal << endl;
wcout << ss.str();
}
catch (HRESULT hr) {
send(_result, hr);
break;
}
}
// Set the result code (does nothing if a value is already set).
send(_result, S_OK);
// Free the COM library.
CoUninitialize();
// Set the agent to the finished state.
done();
}
public:
// Signals the agent to terminate.
static const LONG Sentinel = 0L;
private:
// The IScriptControl object that contains the script procedure.
IScriptControlPtr _pScriptControl;
// Message buffer from which to read arguments to the
// script procedure.
ISource<LONG>& _source;
// The result code for the overall operation.
single_assignment<HRESULT> _result;
};
下列函式 (AgentFibonacci) 會建立數個 FibonacciScriptAgent 物件,並利用訊息傳遞將數個輸入值傳送至這些物件。
// Computes multiple Fibonacci numbers in parallel by using
// asynchronous agents.
HRESULT AgentFibonacci(IScriptControlPtr pScriptControl)
{
// Message buffer to hold arguments to the script procedure.
unbounded_buffer<LONG> values;
// Create several agents.
array<agent*, 3> agents =
{
new FibonacciScriptAgent(pScriptControl, values),
new FibonacciScriptAgent(pScriptControl, values),
new FibonacciScriptAgent(pScriptControl, values),
};
// Start each agent.
for_each(begin(agents), end(agents), [](agent* a) {
a->start();
});
// Send a few values to the agents.
send(values, 30L);
send(values, 22L);
send(values, 10L);
send(values, 12L);
// Send a sentinel value to each agent.
for_each(begin(agents), end(agents), [&values](agent*) {
send(values, FibonacciScriptAgent::Sentinel);
});
// Wait for all agents to finish.
agent::wait_for_all(3, &agents[0]);
// Determine the result code.
HRESULT hr = S_OK;
for_each(begin(agents), end(agents), [&hr](agent* a) {
HRESULT hrTemp;
if (FAILED(hrTemp =
reinterpret_cast<FibonacciScriptAgent*>(a)->GetHRESULT()))
{
hr = hrTemp;
}
});
// Clean up.
for_each(begin(agents), end(agents), [](agent* a) {
delete a;
});
return hr;
}
若要將 AgentFibonacci 函式用於此範例,請在 wmain 函式傳回前加入下列程式碼。
// Use asynchronous agents to compute multiple
// Fibonacci numbers in parallel.
wcout << endl << L"Agent Fibonacci:" << endl;
if (FAILED(hr = AgentFibonacci(pScriptControl)))
return hr;
完整的範例
下列程式碼顯示了完整的範例,而該範例使用平行演算法與非同步代理程式來呼叫可計算 Fibonacci 數字的指令碼程序。
// parallel-scripts.cpp
// compile with: /EHsc
#include <agents.h>
#include <ppl.h>
#include <array>
#include <sstream>
#include <iostream>
#include <atlsafe.h>
// TODO: Change this path if necessary.
#import "C:\windows\system32\msscript.ocx"
using namespace concurrency;
using namespace MSScriptControl;
using namespace std;
// An exception-safe wrapper class that manages the lifetime
// of the COM library in a given scope.
class CCoInitializer
{
public:
explicit CCoInitializer(DWORD dwCoInit = COINIT_APARTMENTTHREADED)
: _coinitialized(false)
{
// Initialize the COM library on the current thread.
HRESULT hr = CoInitializeEx(NULL, dwCoInit);
if (FAILED(hr))
throw hr;
_coinitialized = true;
}
~CCoInitializer()
{
// Free the COM library.
if (_coinitialized)
CoUninitialize();
}
private:
// Flags whether COM was properly initialized.
bool _coinitialized;
// Hide copy constructor and assignment operator.
CCoInitializer(const CCoInitializer&);
CCoInitializer& operator=(const CCoInitializer&);
};
// Calls a procedure in an IScriptControl object.
template<size_t ArgCount>
_variant_t RunScriptProcedure(IScriptControlPtr pScriptControl,
_bstr_t& procedureName, array<_variant_t, ArgCount>& arguments)
{
// Create a 1-dimensional, 0-based safe array.
SAFEARRAYBOUND rgsabound[] = { ArgCount, 0 };
CComSafeArray<VARIANT> sa(rgsabound, 1U);
// Copy the arguments to the safe array.
LONG lIndex = 0;
for_each(begin(arguments), end(arguments), [&](_variant_t& arg) {
HRESULT hr = sa.SetAt(lIndex, arg);
if (FAILED(hr))
throw hr;
++lIndex;
});
// Call the procedure in the script.
return pScriptControl->Run(procedureName, &sa.m_psa);
}
// Computes multiple Fibonacci numbers in parallel by using
// the parallel_for algorithm.
HRESULT ParallelFibonacci(IScriptControlPtr pScriptControl)
{
try {
parallel_for(10L, 20L, [&pScriptControl](LONG lIndex)
{
// Enable COM for the lifetime of the task.
CCoInitializer coinit(COINIT_MULTITHREADED);
// Call the helper function to run the script procedure.
array<_variant_t, 1> args = { _variant_t(lIndex) };
_variant_t result = RunScriptProcedure(
pScriptControl,
_bstr_t("fib"),
args);
// Print the result.
wstringstream ss;
ss << L"fib(" << lIndex << L") = " << result.lVal << endl;
wcout << ss.str();
});
}
catch (HRESULT hr) {
return hr;
}
return S_OK;
}
// A basic agent that calls a script procedure to compute the
// nth Fibonacci number.
class FibonacciScriptAgent : public agent
{
public:
FibonacciScriptAgent(IScriptControlPtr pScriptControl, ISource<LONG>& source)
: _pScriptControl(pScriptControl)
, _source(source) { }
public:
// Retrieves the result code.
HRESULT GetHRESULT()
{
return receive(_result);
}
protected:
void run()
{
// Initialize the COM library on the current thread.
CoInitializeEx(NULL, COINIT_MULTITHREADED);
// Read values from the message buffer until
// we receive the sentinel value.
LONG lValue;
while ((lValue = receive(_source)) != Sentinel)
{
try {
// Call the helper function to run the script procedure.
array<_variant_t, 1> args = { _variant_t(lValue) };
_variant_t result = RunScriptProcedure(
_pScriptControl,
_bstr_t("fib"),
args);
// Print the result.
wstringstream ss;
ss << L"fib(" << lValue << L") = " << result.lVal << endl;
wcout << ss.str();
}
catch (HRESULT hr) {
send(_result, hr);
break;
}
}
// Set the result code (does nothing if a value is already set).
send(_result, S_OK);
// Free the COM library.
CoUninitialize();
// Set the agent to the finished state.
done();
}
public:
// Signals the agent to terminate.
static const LONG Sentinel = 0L;
private:
// The IScriptControl object that contains the script procedure.
IScriptControlPtr _pScriptControl;
// Message buffer from which to read arguments to the
// script procedure.
ISource<LONG>& _source;
// The result code for the overall operation.
single_assignment<HRESULT> _result;
};
// Computes multiple Fibonacci numbers in parallel by using
// asynchronous agents.
HRESULT AgentFibonacci(IScriptControlPtr pScriptControl)
{
// Message buffer to hold arguments to the script procedure.
unbounded_buffer<LONG> values;
// Create several agents.
array<agent*, 3> agents =
{
new FibonacciScriptAgent(pScriptControl, values),
new FibonacciScriptAgent(pScriptControl, values),
new FibonacciScriptAgent(pScriptControl, values),
};
// Start each agent.
for_each(begin(agents), end(agents), [](agent* a) {
a->start();
});
// Send a few values to the agents.
send(values, 30L);
send(values, 22L);
send(values, 10L);
send(values, 12L);
// Send a sentinel value to each agent.
for_each(begin(agents), end(agents), [&values](agent*) {
send(values, FibonacciScriptAgent::Sentinel);
});
// Wait for all agents to finish.
agent::wait_for_all(3, &agents[0]);
// Determine the result code.
HRESULT hr = S_OK;
for_each(begin(agents), end(agents), [&hr](agent* a) {
HRESULT hrTemp;
if (FAILED(hrTemp =
reinterpret_cast<FibonacciScriptAgent*>(a)->GetHRESULT()))
{
hr = hrTemp;
}
});
// Clean up.
for_each(begin(agents), end(agents), [](agent* a) {
delete a;
});
return hr;
}
int wmain()
{
HRESULT hr;
// Enable COM on this thread for the lifetime of the program.
CCoInitializer coinit(COINIT_MULTITHREADED);
// Create the script control.
IScriptControlPtr pScriptControl(__uuidof(ScriptControl));
// Set script control properties.
pScriptControl->Language = "JScript";
pScriptControl->AllowUI = TRUE;
// Add script code that computes the nth Fibonacci number.
hr = pScriptControl->AddCode(
"function fib(n) { if (n<2) return n; else return fib(n-1) + fib(n-2); }" );
if (FAILED(hr))
return hr;
// Test the script control by computing the 15th Fibonacci number.
wcout << L"Main Thread:" << endl;
long n = 15;
array<_variant_t, 1> args = { _variant_t(n) };
_variant_t result = RunScriptProcedure(
pScriptControl,
_bstr_t("fib"),
args);
// Print the result.
wcout << L"fib(" << n << L") = " << result.lVal << endl;
// Use the parallel_for algorithm to compute multiple
// Fibonacci numbers in parallel.
wcout << endl << L"Parallel Fibonacci:" << endl;
if (FAILED(hr = ParallelFibonacci(pScriptControl)))
return hr;
// Use asynchronous agents to compute multiple
// Fibonacci numbers in parallel.
wcout << endl << L"Agent Fibonacci:" << endl;
if (FAILED(hr = AgentFibonacci(pScriptControl)))
return hr;
return S_OK;
}
這個範例 (Example) 會產生下列範例 (Sample) 輸出。
Main Thread:
fib(15) = 610
Parallel Fibonacci:
fib(15) = 610
fib(10) = 55
fib(16) = 987
fib(18) = 2584
fib(11) = 89
fib(17) = 1597
fib(19) = 4181
fib(12) = 144
fib(13) = 233
fib(14) = 377
Agent Fibonacci:
fib(30) = 832040
fib(22) = 17711
fib(10) = 55
fib(12) = 144
編譯程式碼
將範例程式碼複製並貼上它在 Visual Studio 專案中,或將它貼在檔名為平行 scripts.cpp ,然後執行下列命令,Visual Studio 的命令提示字元] 視窗中。
cl.exe /EHsc parallel-scripts.cpp /link ole32.lib