HOW TO：使用反映發出定義泛型型別

發行項
08/21/2008

更新：2007 年 11 月

這個主題將示範如何建立具有兩個型別參數的簡單泛型型別、如何套用類別條件約束、介面條件約束及型別參數的特殊條件約束，以及如何建立將類別的型別參數當做參數型別和傳回型別使用的成員。

重要事項：
方法不會只因為它屬於泛型型別及使用該型別的型別參數，就會是泛型；只有在方法有它自己的型別參數清單時，才會是泛型。如同這個範例所示，泛型型別上的大多數方法都不是泛型。如需發出泛型方法的範例，請參閱 HOW TO：使用反映發出定義泛型方法。

如何定義泛型型別

定義名為 GenericEmitExample1 的動態組件。在此範例中，會執行此組件，並將它儲存到磁碟上，所以指定了 AssemblyBuilderAccess.RunAndSave。

Dim myDomain As AppDomain = AppDomain.CurrentDomain
Dim myAsmName As New AssemblyName("GenericEmitExample1")
Dim myAssembly As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
    myAsmName, _
    AssemblyBuilderAccess.RunAndSave)

AppDomain myDomain = AppDomain.CurrentDomain;
AssemblyName myAsmName = new AssemblyName("GenericEmitExample1");
AssemblyBuilder myAssembly = 
    myDomain.DefineDynamicAssembly(myAsmName, 
        AssemblyBuilderAccess.RunAndSave);

AppDomain^ myDomain = AppDomain::CurrentDomain;
AssemblyName^ myAsmName = gcnew AssemblyName( L"GenericEmitExample1" );
AssemblyBuilder^ myAssembly = myDomain->DefineDynamicAssembly( 
    myAsmName, AssemblyBuilderAccess::RunAndSave );

定義動態模組。組件是由可執行的模組所組成；對於單一模組的組件而言，模組名稱與組件名稱相同，而檔名則是模組名稱加上副檔名。

Dim myModule As ModuleBuilder = myAssembly.DefineDynamicModule( _
    myAsmName.Name, _
    myAsmName.Name & ".dll")

ModuleBuilder myModule = 
    myAssembly.DefineDynamicModule(myAsmName.Name, 
       myAsmName.Name + ".dll");

ModuleBuilder^ myModule = myAssembly->DefineDynamicModule( 
    myAsmName->Name, String::Concat( myAsmName->Name, L".dll" ) );

定義類別。在這個範例中，此類別命名為 Sample。

Dim myType As TypeBuilder = myModule.DefineType( _
    "Sample", _
    TypeAttributes.Public)

TypeBuilder myType = 
    myModule.DefineType("Sample", TypeAttributes.Public);

TypeBuilder^ myType = myModule->DefineType( L"Sample", 
    TypeAttributes::Public );

將包含參數名稱的字串陣列傳遞給 TypeBuilder.DefineGenericParameters 方法來定義 Sample 的泛型型別參數，如此會將類別變成泛型型別。傳回值是表示型別參數的 GenericTypeParameterBuilder 物件陣列，這些參數可用於發出的程式碼中。

在下列程式碼中，Sample 會變成具有型別參數 TFirst 和 TSecond 的泛型型別。為了要讓程式碼更容易讀取，每一個 GenericTypeParameterBuilder 都會放置於與型別參數同名的變數中。

Dim typeParamNames() As String = {"TFirst", "TSecond"}
Dim typeParams() As GenericTypeParameterBuilder = _
    myType.DefineGenericParameters(typeParamNames)

Dim TFirst As GenericTypeParameterBuilder = typeParams(0)
Dim TSecond As GenericTypeParameterBuilder = typeParams(1)

string[] typeParamNames = {"TFirst", "TSecond"};
GenericTypeParameterBuilder[] typeParams = 
    myType.DefineGenericParameters(typeParamNames);

GenericTypeParameterBuilder TFirst = typeParams[0];
GenericTypeParameterBuilder TSecond = typeParams[1];

array<String^>^typeParamNames = {L"TFirst",L"TSecond"};
array<GenericTypeParameterBuilder^>^typeParams = 
    myType->DefineGenericParameters( typeParamNames );

GenericTypeParameterBuilder^ TFirst = typeParams[0];
GenericTypeParameterBuilder^ TSecond = typeParams[1];

將特殊條件約束加入到型別參數中。在此範例中，型別參數 TFirst 會限制為具有無參數的建構函式之型別以及參考型別。

TFirst.SetGenericParameterAttributes( _
    GenericParameterAttributes.DefaultConstructorConstraint _
    Or GenericParameterAttributes.ReferenceTypeConstraint)

TFirst.SetGenericParameterAttributes(
    GenericParameterAttributes.DefaultConstructorConstraint |
    GenericParameterAttributes.ReferenceTypeConstraint);

TFirst->SetGenericParameterAttributes( 
    GenericParameterAttributes::DefaultConstructorConstraint | 
    GenericParameterAttributes::ReferenceTypeConstraint 
);

選擇性地將類別和介面條件約束加入到型別參數中。在此範例中，型別參數 TFirst 限制為衍生自 Type 物件 (包含於變數 baseType 中) 表示的基底類別，以及可實作介面 (此介面的型別包含在變數 interfaceA 和 interfaceB 中) 的型別。請參閱程式碼範例，以了解這些變數的宣告和指派。

TSecond.SetBaseTypeConstraint(baseType)
Dim interfaceTypes() As Type = {interfaceA, interfaceB}
TSecond.SetInterfaceConstraints(interfaceTypes)

TSecond.SetBaseTypeConstraint(baseType);
Type[] interfaceTypes = {interfaceA, interfaceB};
TSecond.SetInterfaceConstraints(interfaceTypes);

array<Type^>^interfaceTypes = { interfaceA, interfaceB };
TSecond->SetInterfaceConstraints( interfaceTypes );
TSecond->SetBaseTypeConstraint( baseType );

定義欄位。在此範例中，欄位的型別是由型別參數 TFirst 所指定；GenericTypeParameterBuilder 衍生自 Type，所以您可以在可使用型別的任何地方使用泛型型別參數。

Dim exField As FieldBuilder = _
    myType.DefineField("ExampleField", TFirst, _
        FieldAttributes.Private)

FieldBuilder exField = 
    myType.DefineField("ExampleField", TFirst, 
        FieldAttributes.Private);

FieldBuilder^ exField = 
    myType->DefineField("ExampleField", TFirst, 
        FieldAttributes::Private);

定義使用泛型型別之型別參數的方法。請注意，這類方法除非有其自己的型別參數清單，否則不為泛型。下列程式碼會定義 static 方法 (Visual Basic 中為 Shared)，此方法可接受 TFirst 的陣列，並傳回包含所有陣列元素的 List<TFirst> (Visual Basic 中為 List(Of TFirst))。若要定義這個方法，必須要建立 List<TFirst> 型別，其方式是呼叫泛型型別定義 List<T> 上的 MakeGenericType。(當您使用 typeof 運算子 (Visual Basic 中為 GetType) 來取得泛型型別定義時，會省略 T)。可以使用 MakeArrayType 方法來建立參數型別。

Dim listOf As Type = GetType(List(Of ))
Dim listOfTFirst As Type = listOf.MakeGenericType(TFirst)
Dim mParamTypes() As Type = { TFirst.MakeArrayType() }

Dim exMethod As MethodBuilder = _
    myType.DefineMethod("ExampleMethod", _
        MethodAttributes.Public Or MethodAttributes.Static, _
        listOfTFirst, _
        mParamTypes)

Type listOf = typeof(List<>);
Type listOfTFirst = listOf.MakeGenericType(TFirst);
Type[] mParamTypes = {TFirst.MakeArrayType()};

MethodBuilder exMethod = 
    myType.DefineMethod("ExampleMethod", 
        MethodAttributes.Public | MethodAttributes.Static, 
        listOfTFirst, 
        mParamTypes);

Type^ listOf = List::typeid;
Type^ listOfTFirst = listOf->MakeGenericType(TFirst);
array<Type^>^ mParamTypes = { TFirst->MakeArrayType() };

MethodBuilder^ exMethod = 
    myType->DefineMethod("ExampleMethod", 
        MethodAttributes::Public | MethodAttributes::Static, 
        listOfTFirst, 
        mParamTypes);

發出方法主體。方法主體是由三個 opcode 所組成，這些 opcode 會將輸入陣列載入到堆疊上、呼叫可接受 IEnumerable<TFirst> (其會執行將輸入元素放入到清單中的所有工作) 的 List<TFirst> 建構函式，然後傳回 (讓新的 List<T> 物件留在堆疊上)。發出此程式碼的困難部分是取得此建構函式。

GenericTypeParameterBuilder 上並不支援 GetConstructor 方法，所以無法直接取得 List<TFirst> 的建構函式。首先，必須取得泛型型別定義 List<T> 的建構函式，然後呼叫可以將它轉換成 List<TFirst> 之對應建構函式的方法。

用於此程式碼範例的建構函式可接受 IEnumerable<T>；但是請注意，這並不是 IEnumerable<T> 泛型介面的泛型型別定義；相反地，List<T> 中的型別參數 T 必須替代 IEnumerable<T> 的型別參數 T。(因為這兩個型別都有名為 T 的型別參數，所以似乎讓人有點混淆；因此，此程式碼範例使用 TFirst 和 TSecond 的名稱)。若要取得建構函式引數的型別，請先從泛型型別定義 IEnumerable<T> 開始，然後使用 List<T> 的第一個泛型型別參數來呼叫 MakeGenericType。此建構函式引數清單必須以陣列形式傳遞 (在此案例中，只有一個引數)。

注意事項：
當您在 C# 中使用 typeof 運算子時，泛型型別定義會表示為 IEnumerable<>；當您在 Visual Basic 中使用 GetType 運算子時，則表示為 IEnumerable(Of )。

現在，可以藉由呼叫泛型型別定義上的 GetConstructor 來取得 List<T> 的建構函式。若要將此建構函式轉換為 List<TFirst> 的對應建構函式，請將 List<TFirst> 和此建構函式從 List<T> 傳遞到靜態 TypeBuilder.GetConstructor(Type, ConstructorInfo) 方法。

Dim ilgen As ILGenerator = exMethod.GetILGenerator()

Dim ienumOf As Type = GetType(IEnumerable(Of ))
Dim listOfTParams() As Type = listOf.GetGenericArguments()
Dim TfromListOf As Type = listOfTParams(0)
Dim ienumOfT As Type = ienumOf.MakeGenericType(TfromListOf)
Dim ctorArgs() As Type = { ienumOfT }

Dim ctorPrep As ConstructorInfo = _
    listOf.GetConstructor(ctorArgs)
Dim ctor As ConstructorInfo = _
    TypeBuilder.GetConstructor(listOfTFirst, ctorPrep)

ilgen.Emit(OpCodes.Ldarg_0)
ilgen.Emit(OpCodes.Newobj, ctor)
ilgen.Emit(OpCodes.Ret)

ILGenerator ilgen = exMethod.GetILGenerator();

Type ienumOf = typeof(IEnumerable<>);
Type TfromListOf = listOf.GetGenericArguments()[0];
Type ienumOfT = ienumOf.MakeGenericType(TfromListOf);
Type[] ctorArgs = {ienumOfT};

ConstructorInfo ctorPrep = listOf.GetConstructor(ctorArgs);
ConstructorInfo ctor = 
    TypeBuilder.GetConstructor(listOfTFirst, ctorPrep);

ilgen.Emit(OpCodes.Ldarg_0);
ilgen.Emit(OpCodes.Newobj, ctor);
ilgen.Emit(OpCodes.Ret);

ILGenerator^ ilgen = exMethod->GetILGenerator();

Type^ ienumOf = IEnumerable::typeid;
Type^ TfromListOf = listOf->GetGenericArguments()[0];
Type^ ienumOfT = ienumOf->MakeGenericType(TfromListOf);
array<Type^>^ ctorArgs = {ienumOfT};

ConstructorInfo^ ctorPrep = listOf->GetConstructor(ctorArgs);
ConstructorInfo^ ctor = 
    TypeBuilder::GetConstructor(listOfTFirst, ctorPrep);

ilgen->Emit(OpCodes::Ldarg_0);
ilgen->Emit(OpCodes::Newobj, ctor);
ilgen->Emit(OpCodes::Ret);

建立型別，然後儲存檔案。

Dim finished As Type = myType.CreateType()
myAssembly.Save(myAsmName.Name & ".dll")

Type finished = myType.CreateType();
myAssembly.Save(myAsmName.Name+".dll");

Type^ finished = myType->CreateType();
myAssembly->Save( String::Concat( myAsmName->Name, L".dll" ) );

叫用方法；ExampleMethod 不是泛型，但是它所屬的型別是泛型，所以為了要取得可以叫用的 MethodInfo，必須要從 Sample 的型別定義建立建構的型別。此建構的型別會使用 Example 類別，而此類別可滿足 TFirst 上的條件約束，因為它是參考型別，而且有預設的無參數之建構函式，以及可滿足 TSecond 上的條件約束之 ExampleDerived 類別。(ExampleDerived 的程式碼可以在範例程式碼一節中找到)。這兩個型別會傳遞到 MakeGenericType，以建立建構的型別。然後，可以使用 GetMethod 方法來取得 MethodInfo。
```
Dim typeArgs() As Type = _
    { GetType(Example), GetType(ExampleDerived) }
Dim constructed As Type = finished.MakeGenericType(typeArgs)
Dim mi As MethodInfo = constructed.GetMethod("ExampleMethod")
```
```
Type[] typeArgs = {typeof(Example), typeof(ExampleDerived)};
Type constructed = finished.MakeGenericType(typeArgs);
MethodInfo mi = constructed.GetMethod("ExampleMethod");
```
```
array<Type^>^ typeArgs = 
    { Example::typeid, ExampleDerived::typeid };
Type^ constructed = finished->MakeGenericType(typeArgs);
MethodInfo^ mi = constructed->GetMethod("ExampleMethod");
```

下列程式碼會建立 Example 物件的陣列，並將該陣列放入型別 Object 的陣列中 (其表示要叫用之方法的引數)，然後再將它們傳遞給 Invoke(Object, array<Object[]) 方法。Invoke 方法的第一個引數為 null 參考，因為此方法是 static。

Dim input() As Example = { New Example(), New Example() }
Dim arguments() As Object = { input }

Dim listX As List(Of Example) = mi.Invoke(Nothing, arguments)

Console.WriteLine(vbLf & _
    "There are {0} elements in the List(Of Example).", _
    listX.Count _ 
)

Example[] input = {new Example(), new Example()};
object[] arguments = {input};

List<Example> listX = 
    (List<Example>) mi.Invoke(null, arguments);

Console.WriteLine(
    "\nThere are {0} elements in the List<Example>.", 
    listX.Count);

array<Example^>^ input = { gcnew Example(), gcnew Example() };
array<Object^>^ arguments = { input };

List<Example^>^ listX = 
    (List<Example^>^) mi->Invoke(nullptr, arguments);

Console::WriteLine(
    "\nThere are {0} elements in the List<Example>.", 
    listX->Count);

範例

下列程式碼範例會定義名為 Sample 的類別，連同基底類別和兩個介面。程式會針對 Sample 定義兩個泛型型別參數，將它轉換成泛型型別。型別參數是讓型別變成泛型的唯一條件；程式會在型別參數定義之前和之後顯示一則測試訊息，以顯示這個條件。

型別參數 TSecond 是用來示範類別和介面條件約束，以使用基底類別和介面，而型別參數 TFirst 是用來示範特殊條件約束。

此程式碼範例會定義欄位和方法，透過的方式是使用該欄位型別和參數的類別之型別參數，以及方法的傳回型別。

當建立 Sample 類別之後，即會叫用此方法。

程式會加入一個可列出泛型型別相關資訊的方法，以及一個可列出型別參數上的特殊條件約束之方法。這些方法可用來顯示與完成的 Sample 類別有關的資訊。

程式會將此完成的模組以 GenericEmitExample1.dll 形式儲存到磁碟中，所以您可利用 MSIL 反組譯工具 (Ildasm.exe) 來開啟它，並檢視 Sample 類別中的 MSIL。

Imports System
Imports System.Reflection
Imports System.Reflection.Emit
Imports System.Collections.Generic

' Define a trivial base class and two trivial interfaces 
' to use when demonstrating constraints.
'
Public Class ExampleBase
End Class

Public Interface IExampleA
End Interface

Public Interface IExampleB
End Interface

' Define a trivial type that can substitute for type parameter 
' TSecond.
'
Public Class ExampleDerived
    Inherits ExampleBase
    Implements IExampleA, IExampleB
End Class

Public Class Example
    Public Shared Sub Main()
        ' Define a dynamic assembly to contain the sample type. The
        ' assembly will not be run, but only saved to disk, so
        ' AssemblyBuilderAccess.Save is specified.
        '
        Dim myDomain As AppDomain = AppDomain.CurrentDomain
        Dim myAsmName As New AssemblyName("GenericEmitExample1")
        Dim myAssembly As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
            myAsmName, _
            AssemblyBuilderAccess.RunAndSave)

        ' An assembly is made up of executable modules. For a single-
        ' module assembly, the module name and file name are the same 
        ' as the assembly name. 
        '
        Dim myModule As ModuleBuilder = myAssembly.DefineDynamicModule( _
            myAsmName.Name, _
            myAsmName.Name & ".dll")

        ' Get type objects for the base class trivial interfaces to
        ' be used as constraints.
        '
        Dim baseType As Type = GetType(ExampleBase)
        Dim interfaceA As Type = GetType(IExampleA)
        Dim interfaceB As Type = GetType(IExampleB)

        ' Define the sample type.
        '
        Dim myType As TypeBuilder = myModule.DefineType( _
            "Sample", _
            TypeAttributes.Public)

        Console.WriteLine("Type 'Sample' is generic: {0}", _
            myType.IsGenericType)

        ' Define type parameters for the type. Until you do this, 
        ' the type is not generic, as the preceding and following 
        ' WriteLine statements show. The type parameter names are
        ' specified as an array of strings. To make the code
        ' easier to read, each GenericTypeParameterBuilder is placed
        ' in a variable with the same name as the type parameter.
        ' 
        Dim typeParamNames() As String = {"TFirst", "TSecond"}
        Dim typeParams() As GenericTypeParameterBuilder = _
            myType.DefineGenericParameters(typeParamNames)

        Dim TFirst As GenericTypeParameterBuilder = typeParams(0)
        Dim TSecond As GenericTypeParameterBuilder = typeParams(1)

        Console.WriteLine("Type 'Sample' is generic: {0}", _
            myType.IsGenericType)

        ' Apply constraints to the type parameters.
        '
        ' A type that is substituted for the first parameter, TFirst,
        ' must be a reference type and must have a parameterless
        ' constructor.
        TFirst.SetGenericParameterAttributes( _
            GenericParameterAttributes.DefaultConstructorConstraint _
            Or GenericParameterAttributes.ReferenceTypeConstraint)

        ' A type that is substituted for the second type
        ' parameter must implement IExampleA and IExampleB, and
        ' inherit from the trivial test class ExampleBase. The
        ' interface constraints are specified as an array 
        ' containing the interface types.
        TSecond.SetBaseTypeConstraint(baseType)
        Dim interfaceTypes() As Type = {interfaceA, interfaceB}
        TSecond.SetInterfaceConstraints(interfaceTypes)

        ' The following code adds a private field named ExampleField,
        ' of type TFirst.
        Dim exField As FieldBuilder = _
            myType.DefineField("ExampleField", TFirst, _
                FieldAttributes.Private)

        ' Define a Shared method that takes an array of TFirst and 
        ' returns a List(Of TFirst) containing all the elements of 
        ' the array. To define this method it is necessary to create
        ' the type List(Of TFirst) by calling MakeGenericType on the
        ' generic type definition, List(Of T). (The T is omitted with
        ' the GetType operator when you get the generic type 
        ' definition.) The parameter type is created by using the
        ' MakeArrayType method. 
        '
        Dim listOf As Type = GetType(List(Of ))
        Dim listOfTFirst As Type = listOf.MakeGenericType(TFirst)
        Dim mParamTypes() As Type = { TFirst.MakeArrayType() }

        Dim exMethod As MethodBuilder = _
            myType.DefineMethod("ExampleMethod", _
                MethodAttributes.Public Or MethodAttributes.Static, _
                listOfTFirst, _
                mParamTypes)

        ' Emit the method body. 
        ' The method body consists of just three opcodes, to load 
        ' the input array onto the execution stack, to call the 
        ' List(Of TFirst) constructor that takes IEnumerable(Of TFirst),
        ' which does all the work of putting the input elements into
        ' the list, and to return, leaving the list on the stack. The
        ' hard work is getting the constructor.
        ' 
        ' The GetConstructor method is not supported on a 
        ' GenericTypeParameterBuilder, so it is not possible to get 
        ' the constructor of List(Of TFirst) directly. There are two
        ' steps, first getting the constructor of List(Of T) and then
        ' calling a method that converts it to the corresponding 
        ' constructor of List(Of TFirst).
        '
        ' The constructor needed here is the one that takes an
        ' IEnumerable(Of T). Note, however, that this is not the 
        ' generic type definition of IEnumerable(Of T); instead, the
        ' T from List(Of T) must be substituted for the T of 
        ' IEnumerable(Of T). (This seems confusing only because both
        ' types have type parameters named T. That is why this example
        ' uses the somewhat silly names TFirst and TSecond.) To get
        ' the type of the constructor argument, take the generic
        ' type definition IEnumerable(Of T) (expressed as 
        ' IEnumerable(Of ) when you use the GetType operator) and 
        ' call MakeGenericType with the first generic type parameter
        ' of List(Of T). The constructor argument list must be passed
        ' as an array, with just one argument in this case.
        ' 
        ' Now it is possible to get the constructor of List(Of T),
        ' using GetConstructor on the generic type definition. To get
        ' the constructor of List(Of TFirst), pass List(Of TFirst) and
        ' the constructor from List(Of T) to the static
        ' TypeBuilder.GetConstructor method.
        '
        Dim ilgen As ILGenerator = exMethod.GetILGenerator()

        Dim ienumOf As Type = GetType(IEnumerable(Of ))
        Dim listOfTParams() As Type = listOf.GetGenericArguments()
        Dim TfromListOf As Type = listOfTParams(0)
        Dim ienumOfT As Type = ienumOf.MakeGenericType(TfromListOf)
        Dim ctorArgs() As Type = { ienumOfT }

        Dim ctorPrep As ConstructorInfo = _
            listOf.GetConstructor(ctorArgs)
        Dim ctor As ConstructorInfo = _
            TypeBuilder.GetConstructor(listOfTFirst, ctorPrep)

        ilgen.Emit(OpCodes.Ldarg_0)
        ilgen.Emit(OpCodes.Newobj, ctor)
        ilgen.Emit(OpCodes.Ret)

        ' Create the type and save the assembly. 
        Dim finished As Type = myType.CreateType()
        myAssembly.Save(myAsmName.Name & ".dll")

        ' Invoke the method.
        ' ExampleMethod is not generic, but the type it belongs to is
        ' generic, so in order to get a MethodInfo that can be invoked
        ' it is necessary to create a constructed type. The Example 
        ' class satisfies the constraints on TFirst, because it is a 
        ' reference type and has a default constructor. In order to
        ' have a class that satisfies the constraints on TSecond, 
        ' this code example defines the ExampleDerived type. These
        ' two types are passed to MakeGenericMethod to create the
        ' constructed type.
        '
        Dim typeArgs() As Type = _
            { GetType(Example), GetType(ExampleDerived) }
        Dim constructed As Type = finished.MakeGenericType(typeArgs)
        Dim mi As MethodInfo = constructed.GetMethod("ExampleMethod")

        ' Create an array of Example objects, as input to the generic
        ' method. This array must be passed as the only element of an 
        ' array of arguments. The first argument of Invoke is 
        ' Nothing, because ExampleMethod is Shared. Display the count
        ' on the resulting List(Of Example).
        ' 
        Dim input() As Example = { New Example(), New Example() }
        Dim arguments() As Object = { input }

        Dim listX As List(Of Example) = mi.Invoke(Nothing, arguments)

        Console.WriteLine(vbLf & _
            "There are {0} elements in the List(Of Example).", _
            listX.Count _ 
        )

        DisplayGenericParameters(finished)
    End Sub

    Private Shared Sub DisplayGenericParameters(ByVal t As Type)

        If Not t.IsGenericType Then
            Console.WriteLine("Type '{0}' is not generic.")
            Return
        End If
        If Not t.IsGenericTypeDefinition Then _
            t = t.GetGenericTypeDefinition()

        Dim typeParameters() As Type = t.GetGenericArguments()
        Console.WriteLine(vbCrLf & _
            "Listing {0} type parameters for type '{1}'.", _
            typeParameters.Length, t)

        For Each tParam As Type In typeParameters

            Console.WriteLine(vbCrLf & "Type parameter {0}:", _
                tParam.ToString())

            For Each c As Type In tParam.GetGenericParameterConstraints()
                If c.IsInterface Then
                    Console.WriteLine("    Interface constraint: {0}", c)
                Else
                    Console.WriteLine("    Base type constraint: {0}", c)
                End If
            Next 

            ListConstraintAttributes(tParam)
        Next tParam
    End Sub

    ' List the constraint flags. The GenericParameterAttributes
    ' enumeration contains two sets of attributes, variance and
    ' constraints. For this example, only constraints are used.
    '
    Private Shared Sub ListConstraintAttributes(ByVal t As Type)

        ' Mask off the constraint flags. 
        Dim constraints As GenericParameterAttributes = _
            t.GenericParameterAttributes And _
            GenericParameterAttributes.SpecialConstraintMask

        If (constraints And GenericParameterAttributes.ReferenceTypeConstraint) _
                <> GenericParameterAttributes.None Then _
            Console.WriteLine("    ReferenceTypeConstraint")

        If (constraints And GenericParameterAttributes.NotNullableValueTypeConstraint) _
                <> GenericParameterAttributes.None Then _
            Console.WriteLine("    NotNullableValueTypeConstraint")

        If (constraints And GenericParameterAttributes.DefaultConstructorConstraint) _
                <> GenericParameterAttributes.None Then _
            Console.WriteLine("    DefaultConstructorConstraint")

    End Sub 

End Class

' This code example produces the following output:
'
'Type 'Sample' is generic: False
'Type 'Sample' is generic: True
'
'There are 2 elements in the List(Of Example).
'
'Listing 2 type parameters for type 'Sample[TFirst,TSecond]'.
'
'Type parameter TFirst:
'    ReferenceTypeConstraint
'    DefaultConstructorConstraint
'
'Type parameter TSecond:
'    Interface constraint: IExampleA
'    Interface constraint: IExampleB
'    Base type constraint: ExampleBase

using System;
using System.Reflection;
using System.Reflection.Emit;
using System.Collections.Generic;

// Define a trivial base class and two trivial interfaces 
// to use when demonstrating constraints.
//
public class ExampleBase {}

public interface IExampleA {}

public interface IExampleB {}

// Define a trivial type that can substitute for type parameter 
// TSecond.
//
public class ExampleDerived : ExampleBase, IExampleA, IExampleB {}


public class Example
{
    public static void Main()
    {
        // Define a dynamic assembly to contain the sample type. The
        // assembly will not be run, but only saved to disk, so
        // AssemblyBuilderAccess.Save is specified.
        //
        AppDomain myDomain = AppDomain.CurrentDomain;
        AssemblyName myAsmName = new AssemblyName("GenericEmitExample1");
        AssemblyBuilder myAssembly = 
            myDomain.DefineDynamicAssembly(myAsmName, 
                AssemblyBuilderAccess.RunAndSave);

        // An assembly is made up of executable modules. For a single-
        // module assembly, the module name and file name are the same 
        // as the assembly name. 
        //
        ModuleBuilder myModule = 
            myAssembly.DefineDynamicModule(myAsmName.Name, 
               myAsmName.Name + ".dll");

        // Get type objects for the base class trivial interfaces to
        // be used as constraints.
        //
        Type baseType = typeof(ExampleBase);
        Type interfaceA = typeof(IExampleA);
        Type interfaceB = typeof(IExampleB);

        // Define the sample type.
        //
        TypeBuilder myType = 
            myModule.DefineType("Sample", TypeAttributes.Public);

        Console.WriteLine("Type 'Sample' is generic: {0}", 
            myType.IsGenericType);

        // Define type parameters for the type. Until you do this, 
        // the type is not generic, as the preceding and following 
        // WriteLine statements show. The type parameter names are
        // specified as an array of strings. To make the code
        // easier to read, each GenericTypeParameterBuilder is placed
        // in a variable with the same name as the type parameter.
        // 
        string[] typeParamNames = {"TFirst", "TSecond"};
        GenericTypeParameterBuilder[] typeParams = 
            myType.DefineGenericParameters(typeParamNames);

        GenericTypeParameterBuilder TFirst = typeParams[0];
        GenericTypeParameterBuilder TSecond = typeParams[1];

        Console.WriteLine("Type 'Sample' is generic: {0}", 
            myType.IsGenericType);

        // Apply constraints to the type parameters.
        //
        // A type that is substituted for the first parameter, TFirst,
        // must be a reference type and must have a parameterless
        // constructor.
        TFirst.SetGenericParameterAttributes(
            GenericParameterAttributes.DefaultConstructorConstraint |
            GenericParameterAttributes.ReferenceTypeConstraint);

        // A type that is substituted for the second type
        // parameter must implement IExampleA and IExampleB, and
        // inherit from the trivial test class ExampleBase. The
        // interface constraints are specified as an array 
        // containing the interface types.
        TSecond.SetBaseTypeConstraint(baseType);
        Type[] interfaceTypes = {interfaceA, interfaceB};
        TSecond.SetInterfaceConstraints(interfaceTypes);

        // The following code adds a private field named ExampleField,
        // of type TFirst.
        FieldBuilder exField = 
            myType.DefineField("ExampleField", TFirst, 
                FieldAttributes.Private);

        // Define a static method that takes an array of TFirst and 
        // returns a List<TFirst> containing all the elements of 
        // the array. To define this method it is necessary to create
        // the type List<TFirst> by calling MakeGenericType on the
        // generic type definition, List<T>. (The T is omitted with
        // the typeof operator when you get the generic type 
        // definition.) The parameter type is created by using the
        // MakeArrayType method. 
        //
        Type listOf = typeof(List<>);
        Type listOfTFirst = listOf.MakeGenericType(TFirst);
        Type[] mParamTypes = {TFirst.MakeArrayType()};

        MethodBuilder exMethod = 
            myType.DefineMethod("ExampleMethod", 
                MethodAttributes.Public | MethodAttributes.Static, 
                listOfTFirst, 
                mParamTypes);

        // Emit the method body. 
        // The method body consists of just three opcodes, to load 
        // the input array onto the execution stack, to call the 
        // List<TFirst> constructor that takes IEnumerable<TFirst>,
        // which does all the work of putting the input elements into
        // the list, and to return, leaving the list on the stack. The
        // hard work is getting the constructor.
        // 
        // The GetConstructor method is not supported on a 
        // GenericTypeParameterBuilder, so it is not possible to get 
        // the constructor of List<TFirst> directly. There are two
        // steps, first getting the constructor of List<T> and then
        // calling a method that converts it to the corresponding 
        // constructor of List<TFirst>.
        //
        // The constructor needed here is the one that takes an
        // IEnumerable<T>. Note, however, that this is not the 
        // generic type definition of IEnumerable<T>; instead, the
        // T from List<T> must be substituted for the T of 
        // IEnumerable<T>. (This seems confusing only because both
        // types have type parameters named T. That is why this example
        // uses the somewhat silly names TFirst and TSecond.) To get
        // the type of the constructor argument, take the generic
        // type definition IEnumerable<T> (expressed as 
        // IEnumerable<> when you use the typeof operator) and 
        // call MakeGenericType with the first generic type parameter
        // of List<T>. The constructor argument list must be passed
        // as an array, with just one argument in this case.
        // 
        // Now it is possible to get the constructor of List<T>,
        // using GetConstructor on the generic type definition. To get
        // the constructor of List<TFirst>, pass List<TFirst> and
        // the constructor from List<T> to the static
        // TypeBuilder.GetConstructor method.
        //
        ILGenerator ilgen = exMethod.GetILGenerator();

        Type ienumOf = typeof(IEnumerable<>);
        Type TfromListOf = listOf.GetGenericArguments()[0];
        Type ienumOfT = ienumOf.MakeGenericType(TfromListOf);
        Type[] ctorArgs = {ienumOfT};

        ConstructorInfo ctorPrep = listOf.GetConstructor(ctorArgs);
        ConstructorInfo ctor = 
            TypeBuilder.GetConstructor(listOfTFirst, ctorPrep);

        ilgen.Emit(OpCodes.Ldarg_0);
        ilgen.Emit(OpCodes.Newobj, ctor);
        ilgen.Emit(OpCodes.Ret);

        // Create the type and save the assembly. 
        Type finished = myType.CreateType();
        myAssembly.Save(myAsmName.Name+".dll");

        // Invoke the method.
        // ExampleMethod is not generic, but the type it belongs to is
        // generic, so in order to get a MethodInfo that can be invoked
        // it is necessary to create a constructed type. The Example 
        // class satisfies the constraints on TFirst, because it is a 
        // reference type and has a default constructor. In order to
        // have a class that satisfies the constraints on TSecond, 
        // this code example defines the ExampleDerived type. These
        // two types are passed to MakeGenericMethod to create the
        // constructed type.
        //
        Type[] typeArgs = {typeof(Example), typeof(ExampleDerived)};
        Type constructed = finished.MakeGenericType(typeArgs);
        MethodInfo mi = constructed.GetMethod("ExampleMethod");

        // Create an array of Example objects, as input to the generic
        // method. This array must be passed as the only element of an 
        // array of arguments. The first argument of Invoke is 
        // null, because ExampleMethod is static. Display the count
        // on the resulting List<Example>.
        // 
        Example[] input = {new Example(), new Example()};
        object[] arguments = {input};

        List<Example> listX = 
            (List<Example>) mi.Invoke(null, arguments);

        Console.WriteLine(
            "\nThere are {0} elements in the List<Example>.", 
            listX.Count);

        DisplayGenericParameters(finished);
    }

    private static void DisplayGenericParameters(Type t)
    {
        if (!t.IsGenericType)
        {
            Console.WriteLine("Type '{0}' is not generic.");
            return;
        }
        if (!t.IsGenericTypeDefinition) 
        {
            t = t.GetGenericTypeDefinition();
        }

        Type[] typeParameters = t.GetGenericArguments();
        Console.WriteLine("\nListing {0} type parameters for type '{1}'.",
            typeParameters.Length, t);

        foreach( Type tParam in typeParameters )
        {
            Console.WriteLine("\r\nType parameter {0}:", tParam.ToString());

            foreach( Type c in tParam.GetGenericParameterConstraints() )
            {
                if (c.IsInterface)
                {
                    Console.WriteLine("    Interface constraint: {0}", c);
                }
                else
                {
                    Console.WriteLine("    Base type constraint: {0}", c);
                }
            }

            ListConstraintAttributes(tParam);
        }
    }

    // List the constraint flags. The GenericParameterAttributes
    // enumeration contains two sets of attributes, variance and
    // constraints. For this example, only constraints are used.
    //
    private static void ListConstraintAttributes(Type t)
    {
        // Mask off the constraint flags. 
        GenericParameterAttributes constraints = 
            t.GenericParameterAttributes & GenericParameterAttributes.SpecialConstraintMask;

        if ((constraints & GenericParameterAttributes.ReferenceTypeConstraint)
            != GenericParameterAttributes.None) 
        {
            Console.WriteLine("    ReferenceTypeConstraint");
        }

        if ((constraints & GenericParameterAttributes.NotNullableValueTypeConstraint)
            != GenericParameterAttributes.None) 
        {
            Console.WriteLine("    NotNullableValueTypeConstraint");
        }

        if ((constraints & GenericParameterAttributes.DefaultConstructorConstraint)
            !=GenericParameterAttributes.None) 
        {
            Console.WriteLine("    DefaultConstructorConstraint");
        }
    }
}

/* This code example produces the following output:

Type 'Sample' is generic: False
Type 'Sample' is generic: True

There are 2 elements in the List<Example>.

Listing 2 type parameters for type 'Sample[TFirst,TSecond]'.

Type parameter TFirst:
    ReferenceTypeConstraint
    DefaultConstructorConstraint

Type parameter TSecond:
    Interface constraint: IExampleA
    Interface constraint: IExampleB
    Base type constraint: ExampleBase
 */

using namespace System;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
using namespace System::Collections::Generic;

// Dummy class to satisfy TFirst constraints.
//
public ref class Example {};

// Define a trivial base class and two trivial interfaces 
// to use when demonstrating constraints.
//
public ref class ExampleBase {};
public interface class IExampleA {};
public interface class IExampleB {};

// Define a trivial type that can substitute for type parameter 
// TSecond.
//
public ref class ExampleDerived : ExampleBase, IExampleA, IExampleB {};

// List the constraint flags. The GenericParameterAttributes
// enumeration contains two sets of attributes, variance and
// constraints. For this example, only constraints are used.
//
static void ListConstraintAttributes( Type^ t )
{
   // Mask off the constraint flags. 
   GenericParameterAttributes constraints = 
       t->GenericParameterAttributes & 
       GenericParameterAttributes::SpecialConstraintMask;

   if ((constraints & GenericParameterAttributes::ReferenceTypeConstraint)
           != GenericParameterAttributes::None)
       Console::WriteLine( L"    ReferenceTypeConstraint");

   if ((constraints & GenericParameterAttributes::NotNullableValueTypeConstraint)
           != GenericParameterAttributes::None)
       Console::WriteLine( L"    NotNullableValueTypeConstraint");

   if ((constraints & GenericParameterAttributes::DefaultConstructorConstraint)
           != GenericParameterAttributes::None)
       Console::WriteLine( L"    DefaultConstructorConstraint");
}

static void DisplayGenericParameters( Type^ t )
{
   if (!t->IsGenericType)
   {
       Console::WriteLine( L"Type '{0}' is not generic." );
       return;
   }
   if (!t->IsGenericTypeDefinition)
       t = t->GetGenericTypeDefinition();

   array<Type^>^ typeParameters = t->GetGenericArguments();
   Console::WriteLine( L"\r\nListing {0} type parameters for type '{1}'.", 
       typeParameters->Length, t );

   for each ( Type^ tParam in typeParameters )
   {
       Console::WriteLine( L"\r\nType parameter {0}:", 
           tParam->ToString() );

       for each (Type^ c in tParam->GetGenericParameterConstraints())
       {
           if (c->IsInterface)
               Console::WriteLine( L"    Interface constraint: {0}", c);
           else
               Console::WriteLine( L"    Base type constraint: {0}", c);
       }
       ListConstraintAttributes(tParam);
   }
}

void main()
{
   // Define a dynamic assembly to contain the sample type. The
   // assembly will be run and also saved to disk, so
   // AssemblyBuilderAccess.RunAndSave is specified.
   //
   AppDomain^ myDomain = AppDomain::CurrentDomain;
   AssemblyName^ myAsmName = gcnew AssemblyName( L"GenericEmitExample1" );
   AssemblyBuilder^ myAssembly = myDomain->DefineDynamicAssembly( 
       myAsmName, AssemblyBuilderAccess::RunAndSave );

   // An assembly is made up of executable modules. For a single-
   // module assembly, the module name and file name are the same 
   // as the assembly name. 
   //
   ModuleBuilder^ myModule = myAssembly->DefineDynamicModule( 
       myAsmName->Name, String::Concat( myAsmName->Name, L".dll" ) );

   // Get type objects for the base class trivial interfaces to
   // be used as constraints.
   //
   Type^ baseType = ExampleBase::typeid; 
   Type^ interfaceA = IExampleA::typeid; 
   Type^ interfaceB = IExampleB::typeid;

   // Define the sample type.
   //
   TypeBuilder^ myType = myModule->DefineType( L"Sample", 
       TypeAttributes::Public );

   Console::WriteLine( L"Type 'Sample' is generic: {0}", 
       myType->IsGenericType );

   // Define type parameters for the type. Until you do this, 
   // the type is not generic, as the preceding and following 
   // WriteLine statements show. The type parameter names are
   // specified as an array of strings. To make the code
   // easier to read, each GenericTypeParameterBuilder is placed
   // in a variable with the same name as the type parameter.
   // 
   array<String^>^typeParamNames = {L"TFirst",L"TSecond"};
   array<GenericTypeParameterBuilder^>^typeParams = 
       myType->DefineGenericParameters( typeParamNames );

   GenericTypeParameterBuilder^ TFirst = typeParams[0];
   GenericTypeParameterBuilder^ TSecond = typeParams[1];

   Console::WriteLine( L"Type 'Sample' is generic: {0}", 
       myType->IsGenericType );

   // Apply constraints to the type parameters.
   //
   // A type that is substituted for the first parameter, TFirst,
   // must be a reference type and must have a parameterless
   // constructor.
   TFirst->SetGenericParameterAttributes( 
       GenericParameterAttributes::DefaultConstructorConstraint | 
       GenericParameterAttributes::ReferenceTypeConstraint 
   );

   // A type that is substituted for the second type
   // parameter must implement IExampleA and IExampleB, and
   // inherit from the trivial test class ExampleBase. The
   // interface constraints are specified as an array
   // containing the interface types. 
   array<Type^>^interfaceTypes = { interfaceA, interfaceB };
   TSecond->SetInterfaceConstraints( interfaceTypes );
   TSecond->SetBaseTypeConstraint( baseType );

   // The following code adds a private field named ExampleField,
   // of type TFirst.
   FieldBuilder^ exField = 
       myType->DefineField("ExampleField", TFirst, 
           FieldAttributes::Private);

   // Define a static method that takes an array of TFirst and 
   // returns a List<TFirst> containing all the elements of 
   // the array. To define this method it is necessary to create
   // the type List<TFirst> by calling MakeGenericType on the
   // generic type definition, generic<T> List. 
   // The parameter type is created by using the
   // MakeArrayType method. 
   //
   Type^ listOf = List::typeid;
   Type^ listOfTFirst = listOf->MakeGenericType(TFirst);
   array<Type^>^ mParamTypes = { TFirst->MakeArrayType() };

   MethodBuilder^ exMethod = 
       myType->DefineMethod("ExampleMethod", 
           MethodAttributes::Public | MethodAttributes::Static, 
           listOfTFirst, 
           mParamTypes);

   // Emit the method body. 
   // The method body consists of just three opcodes, to load 
   // the input array onto the execution stack, to call the 
   // List<TFirst> constructor that takes IEnumerable<TFirst>,
   // which does all the work of putting the input elements into
   // the list, and to return, leaving the list on the stack. The
   // hard work is getting the constructor.
   // 
   // The GetConstructor method is not supported on a 
   // GenericTypeParameterBuilder, so it is not possible to get 
   // the constructor of List<TFirst> directly. There are two
   // steps, first getting the constructor of generic<T> List and then
   // calling a method that converts it to the corresponding 
   // constructor of List<TFirst>.
   //
   // The constructor needed here is the one that takes an
   // IEnumerable<T>. Note, however, that this is not the 
   // generic type definition of generic<T> IEnumerable; instead, the
   // T from generic<T> List must be substituted for the T of 
   // generic<T> IEnumerable. (This seems confusing only because both
   // types have type parameters named T. That is why this example
   // uses the somewhat silly names TFirst and TSecond.) To get
   // the type of the constructor argument, take the generic
   // type definition generic<T> IEnumerable and 
   // call MakeGenericType with the first generic type parameter
   // of generic<T> List. The constructor argument list must be passed
   // as an array, with just one argument in this case.
   // 
   // Now it is possible to get the constructor of generic<T> List,
   // using GetConstructor on the generic type definition. To get
   // the constructor of List<TFirst>, pass List<TFirst> and
   // the constructor from generic<T> List to the static
   // TypeBuilder.GetConstructor method.
   //
   ILGenerator^ ilgen = exMethod->GetILGenerator();

   Type^ ienumOf = IEnumerable::typeid;
   Type^ TfromListOf = listOf->GetGenericArguments()[0];
   Type^ ienumOfT = ienumOf->MakeGenericType(TfromListOf);
   array<Type^>^ ctorArgs = {ienumOfT};

   ConstructorInfo^ ctorPrep = listOf->GetConstructor(ctorArgs);
   ConstructorInfo^ ctor = 
       TypeBuilder::GetConstructor(listOfTFirst, ctorPrep);

   ilgen->Emit(OpCodes::Ldarg_0);
   ilgen->Emit(OpCodes::Newobj, ctor);
   ilgen->Emit(OpCodes::Ret);

   // Create the type and save the assembly. 
   Type^ finished = myType->CreateType();
   myAssembly->Save( String::Concat( myAsmName->Name, L".dll" ) );

   // Invoke the method.
   // ExampleMethod is not generic, but the type it belongs to is
   // generic, so in order to get a MethodInfo that can be invoked
   // it is necessary to create a constructed type. The Example 
   // class satisfies the constraints on TFirst, because it is a 
   // reference type and has a default constructor. In order to
   // have a class that satisfies the constraints on TSecond, 
   // this code example defines the ExampleDerived type. These
   // two types are passed to MakeGenericMethod to create the
   // constructed type.
   //
   array<Type^>^ typeArgs = 
       { Example::typeid, ExampleDerived::typeid };
   Type^ constructed = finished->MakeGenericType(typeArgs);
   MethodInfo^ mi = constructed->GetMethod("ExampleMethod");

   // Create an array of Example objects, as input to the generic
   // method. This array must be passed as the only element of an 
   // array of arguments. The first argument of Invoke is 
   // null, because ExampleMethod is static. Display the count
   // on the resulting List<Example>.
   // 
   array<Example^>^ input = { gcnew Example(), gcnew Example() };
   array<Object^>^ arguments = { input };

   List<Example^>^ listX = 
       (List<Example^>^) mi->Invoke(nullptr, arguments);

   Console::WriteLine(
       "\nThere are {0} elements in the List<Example>.", 
       listX->Count);

   DisplayGenericParameters(finished);
}

/* This code example produces the following output:

Type 'Sample' is generic: False
Type 'Sample' is generic: True

There are 2 elements in the List<Example>.

Listing 2 type parameters for type 'Sample[TFirst,TSecond]'.

Type parameter TFirst:
    ReferenceTypeConstraint
    DefaultConstructorConstraint

Type parameter TSecond:
    Interface constraint: IExampleA
    Interface constraint: IExampleB
    Base type constraint: ExampleBase
 */

編譯程式碼

此程式碼含有進行編譯所需的 C# using 陳述式 (Visual Basic 中的 Imports)。
不需要其他的組件參考。
使用 csc.exe、vbc.exe 或 cl.exe，在命令列上編譯程式碼；若要在 Visual Studio 中編譯程式碼，請將它放置在主控台應用程式專案範本中。

請參閱

共用方式為

HOW TO：使用反映發出定義泛型型別

如何定義泛型型別

範例

編譯程式碼

請參閱

概念

參考

其他資源

其他資源