在 Windows Form DataGridView 控制項中的資料行填入模式
更新：2007 年 11 月
在資料行填入模式中，DataGridView 控制項會自動調整資料行的大小，將資料行填滿可用顯示區域的寬度。除非有必要將每個資料行的寬度保持等於或大於其 MinimumWidth 屬性值，否則控制項並不會顯示水平捲軸。
每個資料行的調整行為是根據其 InheritedAutoSizeMode 屬性來決定。如果資料行值為 NotSet (預設值)，則這個屬性值會從資料行的 AutoSizeMode 屬性或控制項的 AutoSizeColumnsMode 屬性繼承。
每個資料行都可以使用不同的調整模式，但是任何使用 Fill 調整模式的資料行都會共用其他資料行未使用的顯示區域寬度。這個寬度會依照所有使用填入模式的資料行之 FillWeight 屬性值的相對比例來分割。例如，如果兩個資料行的 FillWeight 屬性值各為 100 和 200，則第一個資料行的寬度只有第二個資料行的一半。
在填入模式中的使用者調整大小
填入模式與根據儲存格內容來調整大小的模式的不同之處，在於填入模式不會防止使用者調整 Resizable 屬性值為 true 的資料行。當使用者調整一個填入模式資料行的大小時，任何在這個資料行之後 (如果 RightToLeft 值為 false 則為右側，否則為左側) 的填入模式資料行都會隨著調整大小，以因應可用寬度的變更。如果在使用者調整的資料行之後沒有填入模式資料行，則控制項中所有其他填入模式資料行都會調整大小來因應。如果控制項中沒有其他填入模式資料行，則使用者的調整會被忽略。如果使用者調整的不是填入模式資料行，則控制項中所有的填入模式資料行都會調整大小來因應。
在調整了填入模式資料行的大小之後，所有變更過的資料行的 FillWeight 值都會按照比例調整。例如，如果四個填入模式資料行的 FillWeight 值各為 100，將第二個資料行的寬度調整為原來的一半之後，FillWeight 值將變成 100、50、125 和 125。調整不是填入模式的資料行並不會對 FillWeight 值造成影響，因為填入模式資料行只會調整大小來因應寬度的變更，使用的仍然是相同的比例。
內容架構的 FillWeight 調整
您可以使用 DataGridView 中的自動調整方法，例如 AutoResizeColumns 方法，將填入模式資料行的 FillWeight 值初始化。這個方法會先計算資料行顯示其內容所需的寬度。接著，控制項會調整所有填入模式資料行的 FillWeight 值，使它們的比例符合計算出來的寬度。最後，控制項會使用新的 FillWeight 比例來調整填入資料行的大小，填滿控制項中可用的水平空間。
範例
描述
在 AutoSizeMode、MinimumWidth、FillWeight 和 Resizable 屬性中使用適當的值，您就可以自訂資料行的調整行為，以適用於不同的情況。
透過下列的範例程式碼，您可以在不同資料行的 AutoSizeMode、FillWeight 和 MinimumWidth 屬性中嘗試不同的值。在這個範例中，DataGridView 控制項被繫結至其本身的 Columns 集合，而其資料行則繫結至每一個 HeaderText、AutoSizeMode、FillWeight、MinimumWidth 和 Width 屬性。每一個資料行在控制項中都以一個資料列來表示，資料列中的值所發生的變更將會更新至對應資料行中的屬性，因此您可以看出這些值如何互動。
程式碼
Imports System
Imports System.ComponentModel
Imports System.Reflection
Imports System.Windows.Forms
Public Class Form1
Inherits Form
<STAThread()> _
Public Shared Sub Main()
Application.Run(New Form1())
End Sub
Private WithEvents dataGridView1 As New DataGridView()
Public Sub New()
dataGridView1.Dock = DockStyle.Fill
Controls.Add(dataGridView1)
InitializeDataGridView()
Width = Width * 2
Text = "Column Fill-Mode Demo"
End Sub
Private Sub InitializeDataGridView()
' Add columns to the DataGridView, binding them to the
' specified DataGridViewColumn properties.
AddReadOnlyColumn("HeaderText", "Column")
AddColumn("AutoSizeMode")
AddColumn("FillWeight")
AddColumn("MinimumWidth")
AddColumn("Width")
' Bind the DataGridView to its own Columns collection.
dataGridView1.AutoGenerateColumns = False
dataGridView1.DataSource = dataGridView1.Columns
' Configure the DataGridView so that users can manually change
' only the column widths, which are set to fill mode.
dataGridView1.AllowUserToAddRows = False
dataGridView1.AllowUserToDeleteRows = False
dataGridView1.AllowUserToResizeRows = False
dataGridView1.RowHeadersWidthSizeMode = _
DataGridViewRowHeadersWidthSizeMode.DisableResizing
dataGridView1.ColumnHeadersHeightSizeMode = _
DataGridViewColumnHeadersHeightSizeMode.DisableResizing
dataGridView1.AutoSizeColumnsMode = _
DataGridViewAutoSizeColumnsMode.Fill
' Configure the top left header cell as a reset button.
dataGridView1.TopLeftHeaderCell.Value = "reset"
dataGridView1.TopLeftHeaderCell.Style.ForeColor = _
System.Drawing.Color.Blue
End Sub
Private Sub AddReadOnlyColumn(ByVal dataPropertyName As String, _
ByVal columnName As String)
AddColumn(GetType(DataGridViewColumn), dataPropertyName, True, _
columnName)
End Sub
Private Sub AddColumn(ByVal dataPropertyName As String)
AddColumn(GetType(DataGridViewColumn), dataPropertyName, False, _
dataPropertyName)
End Sub
' Adds a column to the DataGridView control, binding it to specified
' property of the specified type and optionally making it read-only.
Private Sub AddColumn( _
ByVal type As Type, _
ByVal dataPropertyName As String, _
ByVal isReadOnly As Boolean, _
ByVal columnName As String)
' Retrieve information about the property through reflection.
Dim propertyInfo1 As PropertyInfo = type.GetProperty(dataPropertyName)
' Confirm that the property exists and is accessible.
If propertyInfo1 Is Nothing Then
Throw New ArgumentException("No accessible " & dataPropertyName & _
" property was found in the " & type.Name & " type.")
End If
' Confirm that the property is browsable.
Dim browsables As BrowsableAttribute() = CType( _
propertyInfo1.GetCustomAttributes(GetType(BrowsableAttribute), _
False), BrowsableAttribute())
If browsables.Length > 0 AndAlso Not browsables(0).Browsable Then
Throw New ArgumentException("The " & dataPropertyName & " property has a " & _
"Browsable(false) attribute, and therefore cannot be bound.")
End If
' Create and initialize a column, using a combo box column for
' enumeration properties, a check box column for Boolean properties,
' and a text box column otherwise.
Dim column As DataGridViewColumn
Dim valueType As Type = propertyInfo1.PropertyType
If valueType.IsEnum Then
column = New DataGridViewComboBoxColumn()
' Populate the drop-down list with the enumeration values.
CType(column, DataGridViewComboBoxColumn).DataSource = _
[Enum].GetValues(valueType)
ElseIf valueType.Equals(GetType(Boolean)) Then
column = New DataGridViewCheckBoxColumn()
Else
column = New DataGridViewTextBoxColumn()
End If
' Initialize and bind the column.
column.ValueType = valueType
column.Name = columnName
column.DataPropertyName = dataPropertyName
column.ReadOnly = isReadOnly
' Add the column to the control.
dataGridView1.Columns.Add(column)
End Sub
Private Sub ResetDataGridView()
dataGridView1.CancelEdit()
dataGridView1.Columns.Clear()
dataGridView1.DataSource = Nothing
InitializeDataGridView()
End Sub
Private Sub dataGridView1_CellClick( _
ByVal sender As Object, ByVal e As DataGridViewCellEventArgs) _
Handles dataGridView1.CellClick
If e.ColumnIndex = -1 AndAlso e.RowIndex = -1 Then
ResetDataGridView()
End If
End Sub
Private Sub dataGridView1_ColumnWidthChanged( _
ByVal sender As Object, ByVal e As DataGridViewColumnEventArgs) _
Handles dataGridView1.ColumnWidthChanged
' Invalidate the row corresponding to the column that changed
' to ensure that the FillWeight and Width entries are updated.
dataGridView1.InvalidateRow(e.Column.Index)
End Sub
Private Sub dataGridView1_CurrentCellDirtyStateChanged( _
ByVal sender As Object, ByVal e As EventArgs) _
Handles dataGridView1.CurrentCellDirtyStateChanged
' For combo box and check box cells, commit any value change as soon
' as it is made rather than waiting for the focus to leave the cell.
If Not dataGridView1.CurrentCell.OwningColumn.GetType() _
.Equals(GetType(DataGridViewTextBoxColumn)) Then
dataGridView1.CommitEdit(DataGridViewDataErrorContexts.Commit)
End If
End Sub
Private Sub dataGridView1_DataError( _
ByVal sender As Object, ByVal e As DataGridViewDataErrorEventArgs) _
Handles dataGridView1.DataError
If e.Exception Is Nothing Then Return
' If the user-specified value is invalid, cancel the change
' and display the error icon in the row header.
If Not (e.Context And DataGridViewDataErrorContexts.Commit) = 0 AndAlso _
(GetType(FormatException).IsAssignableFrom(e.Exception.GetType()) Or _
GetType(ArgumentException).IsAssignableFrom(e.Exception.GetType())) Then
dataGridView1.Rows(e.RowIndex).ErrorText = e.Exception.Message
e.Cancel = True
Else
' Rethrow any exceptions that aren't related to the user input.
e.ThrowException = True
End If
End Sub
Private Sub dataGridView1_CellEndEdit( _
ByVal sender As Object, ByVal e As DataGridViewCellEventArgs) _
Handles dataGridView1.CellEndEdit
' Ensure that the error icon in the row header is hidden.
dataGridView1.Rows(e.RowIndex).ErrorText = ""
End Sub
Private Sub dataGridView1_CellValueChanged( _
ByVal sender As Object, ByVal e As DataGridViewCellEventArgs) _
Handles dataGridView1.CellValueChanged
' Ignore the change to the top-left header cell.
If e.ColumnIndex < 0 Then Return
' Retrieve the property to change.
Dim nameOfPropertyToChange As String = _
dataGridView1.Columns(e.ColumnIndex).Name
Dim propertyToChange As PropertyInfo = _
GetType(DataGridViewColumn).GetProperty(nameOfPropertyToChange)
' Retrieve the column to change.
Dim nameOfColumnToChange As String = _
CStr(dataGridView1("Column", e.RowIndex).Value)
Dim columnToChange As DataGridViewColumn = _
dataGridView1.Columns(nameOfColumnToChange)
' Use reflection to update the value of the column property.
propertyToChange.SetValue(columnToChange, _
dataGridView1(nameOfPropertyToChange, e.RowIndex).Value, Nothing)
End Sub
End Class
using System;
using System.ComponentModel;
using System.Reflection;
using System.Windows.Forms;
public class Form1 : Form
{
[STAThread]
public static void Main()
{
Application.Run(new Form1());
}
private DataGridView dataGridView1 = new DataGridView();
public Form1()
{
dataGridView1.Dock = DockStyle.Fill;
Controls.Add(dataGridView1);
InitializeDataGridView();
Width *= 2;
Text = "Column Fill-Mode Demo";
}
private void InitializeDataGridView()
{
// Add columns to the DataGridView, binding them to the
// specified DataGridViewColumn properties.
AddReadOnlyColumn("HeaderText", "Column");
AddColumn("AutoSizeMode");
AddColumn("FillWeight");
AddColumn("MinimumWidth");
AddColumn("Width");
// Bind the DataGridView to its own Columns collection.
dataGridView1.AutoGenerateColumns = false;
dataGridView1.DataSource = dataGridView1.Columns;
// Configure the DataGridView so that users can manually change
// only the column widths, which are set to fill mode.
dataGridView1.AllowUserToAddRows = false;
dataGridView1.AllowUserToDeleteRows = false;
dataGridView1.AllowUserToResizeRows = false;
dataGridView1.RowHeadersWidthSizeMode =
DataGridViewRowHeadersWidthSizeMode.DisableResizing;
dataGridView1.ColumnHeadersHeightSizeMode =
DataGridViewColumnHeadersHeightSizeMode.DisableResizing;
dataGridView1.AutoSizeColumnsMode =
DataGridViewAutoSizeColumnsMode.Fill;
// Configure the top left header cell as a reset button.
dataGridView1.TopLeftHeaderCell.Value = "reset";
dataGridView1.TopLeftHeaderCell.Style.ForeColor =
System.Drawing.Color.Blue;
// Add handlers to DataGridView events.
dataGridView1.CellClick +=
new DataGridViewCellEventHandler(dataGridView1_CellClick);
dataGridView1.ColumnWidthChanged += new
DataGridViewColumnEventHandler(dataGridView1_ColumnWidthChanged);
dataGridView1.CurrentCellDirtyStateChanged +=
new EventHandler(dataGridView1_CurrentCellDirtyStateChanged);
dataGridView1.DataError +=
new DataGridViewDataErrorEventHandler(dataGridView1_DataError);
dataGridView1.CellEndEdit +=
new DataGridViewCellEventHandler(dataGridView1_CellEndEdit);
dataGridView1.CellValueChanged +=
new DataGridViewCellEventHandler(dataGridView1_CellValueChanged);
}
private void AddReadOnlyColumn(String dataPropertyName, String columnName)
{
AddColumn(typeof(DataGridViewColumn), dataPropertyName, true,
columnName);
}
private void AddColumn(String dataPropertyName)
{
AddColumn(typeof(DataGridViewColumn), dataPropertyName, false,
dataPropertyName);
}
// Adds a column to the DataGridView control, binding it to specified
// property of the specified type and optionally making it read-only.
private void AddColumn(
Type type,
String dataPropertyName,
Boolean readOnly,
String columnName)
{
// Retrieve information about the property through reflection.
PropertyInfo property = type.GetProperty(dataPropertyName);
// Confirm that the property exists and is accessible.
if (property == null) throw new ArgumentException("No accessible " +
dataPropertyName + " property was found in the " + type.Name + " type.");
// Confirm that the property is browsable.
BrowsableAttribute[] browsables = (BrowsableAttribute[])
property.GetCustomAttributes(typeof(BrowsableAttribute), false);
if (browsables.Length > 0 && !browsables[0].Browsable)
{
throw new ArgumentException("The " + dataPropertyName + " property has a " +
"Browsable(false) attribute, and therefore cannot be bound.");
}
// Create and initialize a column, using a combo box column for
// enumeration properties, a check box column for Boolean properties,
// and a text box column otherwise.
DataGridViewColumn column;
Type valueType = property.PropertyType;
if (valueType.IsEnum)
{
column = new DataGridViewComboBoxColumn();
// Populate the drop-down list with the enumeration values.
((DataGridViewComboBoxColumn)column).DataSource
= Enum.GetValues(valueType);
}
else if (valueType.Equals(typeof(Boolean)))
{
column = new DataGridViewCheckBoxColumn();
}
else
{
column = new DataGridViewTextBoxColumn();
}
// Initialize and bind the column.
column.ValueType = valueType;
column.Name = columnName;
column.DataPropertyName = dataPropertyName;
column.ReadOnly = readOnly;
// Add the column to the control.
dataGridView1.Columns.Add(column);
}
private void ResetDataGridView()
{
dataGridView1.CancelEdit();
dataGridView1.Columns.Clear();
dataGridView1.DataSource = null;
InitializeDataGridView();
}
private void dataGridView1_CellClick(
object sender, DataGridViewCellEventArgs e)
{
if (e.ColumnIndex == -1 && e.RowIndex == -1)
{
ResetDataGridView();
}
}
private void dataGridView1_ColumnWidthChanged(
object sender, DataGridViewColumnEventArgs e)
{
// Invalidate the row corresponding to the column that changed
// to ensure that the FillWeight and Width entries are updated.
dataGridView1.InvalidateRow(e.Column.Index);
}
private void dataGridView1_CurrentCellDirtyStateChanged(
object sender, EventArgs e)
{
// For combo box and check box cells, commit any value change as soon
// as it is made rather than waiting for the focus to leave the cell.
if (!dataGridView1.CurrentCell.OwningColumn.GetType()
.Equals(typeof(DataGridViewTextBoxColumn)))
{
dataGridView1.CommitEdit(DataGridViewDataErrorContexts.Commit);
}
}
private void dataGridView1_DataError(
object sender, DataGridViewDataErrorEventArgs e)
{
if (e.Exception == null) return;
// If the user-specified value is invalid, cancel the change
// and display the error icon in the row header.
if ((e.Context & DataGridViewDataErrorContexts.Commit) != 0 &&
(typeof(FormatException).IsAssignableFrom(e.Exception.GetType()) ||
typeof(ArgumentException).IsAssignableFrom(e.Exception.GetType())))
{
dataGridView1.Rows[e.RowIndex].ErrorText =
"The specified value is invalid.";
e.Cancel = true;
}
else
{
// Rethrow any exceptions that aren't related to the user input.
e.ThrowException = true;
}
}
private void dataGridView1_CellEndEdit(
object sender, DataGridViewCellEventArgs e)
{
// Ensure that the error icon in the row header is hidden.
dataGridView1.Rows[e.RowIndex].ErrorText = "";
}
private void dataGridView1_CellValueChanged(
object sender, DataGridViewCellEventArgs e)
{
// Retrieve the property to change.
String nameOfPropertyToChange =
dataGridView1.Columns[e.ColumnIndex].Name;
PropertyInfo propertyToChange =
typeof(DataGridViewColumn).GetProperty(nameOfPropertyToChange);
// Retrieve the column to change.
String nameOfColumnToChange =
(String)dataGridView1["Column", e.RowIndex].Value;
DataGridViewColumn columnToChange =
dataGridView1.Columns[nameOfColumnToChange];
// Use reflection to update the value of the column property.
propertyToChange.SetValue(columnToChange,
dataGridView1[nameOfPropertyToChange, e.RowIndex].Value, null);
}
}
註解
若要使用示範應用程式：
變更表單大小。觀察資料行變更寬度的方式，同時維持由 FillWeight 屬性值所表示的比例。
使用滑鼠拖曳資料行分割線，藉此變更資料行大小。觀察 FillWeight 值如何變更。
變更一個資料行的 MinimumWidth 值，然後以拖曳方式調整表單大小。觀察當表單變得很小的時候，Width 值如何維持在 MinimumWidth 值以上。
變更所有資料行的 MinimumWidth 值至一個較大的數字，讓加起來的總和超過控制項的寬度。觀察水平捲軸如何出現。
變更一些資料行的 AutoSizeMode 值。當您調整資料行大小或表單大小時，觀察其效果。
編譯程式碼
這項範例需要：
- System、System.Drawing 和 System.Windows.Forms 組件的參考。
如需從 Visual Basic 或 Visual C# 的命令列建置這個範例的詳細資訊，請參閱從命令列建置 (Visual Basic) 或使用 csc.exe 建置命令列。您也可以透過將程式碼貼入新的專案，在 Visual Studio 中建置此範例。
請參閱
參考
DataGridView.AutoResizeColumns
DataGridView.AutoSizeColumnsMode
DataGridViewAutoSizeColumnsMode
DataGridViewColumn.InheritedAutoSizeMode
DataGridViewColumn.AutoSizeMode
DataGridViewAutoSizeColumnMode
DataGridViewColumn.MinimumWidth