Approve-WdsClient

發行項
11/17/2015

Approve-WdsClient

Approves clients.

語法

Parameter Set: MultipleMachine
Approve-WdsClient [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: MultipleMachineUserAndJoinRights
Approve-WdsClient -JoinRights <JoinRights> -User <String> [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: SingleMachine
Approve-WdsClient -RequestId <UInt32> [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-DeviceName <String> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: SingleMachineUserAndJoinRights
Approve-WdsClient -JoinRights <JoinRights> -RequestId <UInt32> -User <String> [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-DeviceName <String> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

詳細描述

The Approve-WdsClient cmdlet approves clients that need administrative approval. Unknown clients require approval before the server that runs Windows Deployment Services boots the client in the Pre-Boot Execution Environment (PXE). You can specify a single device to approve by using a request ID. The server that runs Windows Deployment Services allocates a request ID to a device. If you do not specify a client to approve, the cmdlet approves all pending clients.

At the time you approve an unknown client, you can also modify settings for the client. Use the New-WdsClient and Set-WdsClient cmdlets to create and modify pre-staged clients.

參數

-AsJob

別名	無
必要？	false
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-BootImagePath<String>

Specifies a path to the boot image. This is a relative path from the RemoteInstall share to the boot image file for the computer.

別名	無
必要？	false
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-BootProgram<String>

Specifies the relative path from the RemoteInstall share to the network boot program for the computer.

別名	無
必要？	false
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-CimSession<CimSession[]>

在遠端工作階段或遠端電腦上執行 Cmdlet。輸入電腦名稱或工作階段物件，例如 New-CimSession 或 Get-CimSession Cmdlet 的輸出。預設為本機電腦上的目前工作階段。

別名	Session
必要？	false
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-DeviceName<String>

Specifies the name of the computer associated with the pre-staged client. This is a sAMAccountName value.

別名	無
必要？	false
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-JoinDomain<Boolean>

Indicates whether to join the computer to a domain as the account specified by the User parameter.

別名	無
必要？	false
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-JoinRights<JoinRights>

Specifies the rights to assign to the account. 此參數接受的值包括：

-- Full. Assigns full access rights, which includes the right to join the computer to the domain at any time.
-- JoinOnly. Requires the administrator to reset the computer account before the user can join the computer to the domain.

別名	無
必要？	true
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-OU<String>

Specifies the distinguished name of an OU. The cmdlet creates the computer account object in this location. If you do not specify this parameter, Windows Deployment Services creates the account in the default computer container in the domain of the server that runs Windows Deployment Services.

別名	無
必要？	false
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-ReferralServer<String>

Specifies the name of a server. If you specify a referral server, the computer connects to this Windows Deployment Services server to download the network boot program and boot image by using Trivial File Transfer Protocol (TFTP).

別名	無
必要？	false
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-RequestId<UInt32>

Specifies the request ID that the server that runs Windows Deployment Services allocates to a device in the Pending Device database. If you do not specify this parameter, the cmdlet approves all all clients in the Pending Device database.

別名	無
必要？	true
位置？	named
預設值	無
接受管線輸入？	True (ByValue, ByPropertyName)
接受萬用字元？	false

-ThrottleLimit<Int32>

指定為執行此 Cmdlet 可建立的最大同時作業數。如果省略這個參數或輸入 0 的值，則 Windows PowerShell® 會根據在電腦上執行的 CIM Cmdlet 數目，計算 Cmdlet 的最佳節流限制。節流限制僅適用於目前 Cmdlet，不適用於工作階段或電腦。

別名	無
必要？	false
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-User<String>

Specifies a user, in the format DOMAIN\User or User@Domain. If you specify a value of $True for the JoinDomain parameter, the cmdlet assigns the user the right to join the computer to the domain specified by the Domain parameter. To join the client computer to the specified domain without granting any user rights, specify a value of $True for the JoinDomain parameter, but do not specify a user.

別名	無
必要？	true
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

-WdsClientUnattend<String>

Specifies an answer file as a relative path from the RemoteInstall share. This file contains information for the Windows Deployment Services client user interface screens, such as entering credentials, choosing an install image, and configuring the disk.

別名	無
必要？	false
位置？	named
預設值	無
接受管線輸入？	false
接受萬用字元？	false

<CommonParameters>

此 Cmdlet 支援一般參數：-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer 與 -OutVariable。如需詳細資訊，請參閱 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

輸入

輸入類型是您可以使用管線處理方式傳遞給 Cmdlet 的物件類型。

輸出

輸出類型是 Cmdlet 所發出的物件類型。

Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsClient

範例

Example 1: Approve all pre-staged clients and modify settings

This command approves all pending pre-staged clients. The command also specifies a boot image, boot program, and referral server. The PXE boot process refers to the answer file specified by the WdsClientUnattend parameter.

The JoinDomain parameter has a value of $True, so these computers join a domain. The command specifies an OU for the computers.

PS C:\> Approve-WdsClient -BootImagePath "boot\x86\images\Contosox86boot.wim" -BootProgram "boot\x86\PxeBoot.com" -JoinDomain $True -OU "OU=Unit21,CN=TSQAMain,DC=Contoso,DC=com" -ReferralServer "WindowsDS01" -WdsClientUnattend "WindowsDSClientUnattend\Unattend.xml"

Example 2: Approve all pre-staged clients and specify a user

This command approves all pending pre-staged clients. The command also specifies a boot image and boot program.

The JoinDomain parameter has a value of $True, so these computers join a domain. The command specifies the user TSQADOMAIN\PattiFuller and specifies an OU for the computers.

PS C:\> Approve-WdsClient -JoinRights JoinOnly -User "TSQADOMAIN\PattiFuller" -BootImagePath "boot\x86\images\Contosox86boot.wim" -BootProgram "boot\x86\PxeBoot.com" -JoinDomain $True -OU "OU=Unit21,CN=TSQAMain,DC=Contoso,DC=com"

Example 3: Approve a pre-staged client

This command approves a pre-staged client that has a request ID of seven, and assigns the device name TSQA004.

PS C:\> Approve-WdsClient -RequestId 7 -DeviceName "TSQA004"

Example 4: Approve a pre-staged client and modify settings

This command approves a pre-staged client that has a request ID of 22 and assigns the device name TSQA009. The command also specifies a boot image and boot program.

The JoinDomain parameter has a value of $True, so this computer joins a domain. The command specifies the user ITAdmin01@TSQADomain.Contoso.com and specifies an OU for the computer. The user has full join rights.

PS C:\> Approve-WdsClient -JoinRights Full -RequestId 22 -User "ITAdmin01@TSQADomain.Contoso.com" -BootImagePath "boot\x86\images\Contosox86boot.wim" -BootProgram "boot\x86\PxeBoot.com" -DeviceName "TSQA009" -JoinDomain $True -OU "OU=Unit21,CN=TSQAMain,DC=Contoso,DC=com"

共用方式為

Approve-WdsClient