Set-NetNatTransitionConfiguration
Set-NetNatTransitionConfiguration
Sets the NAT64 configuration on a computer.
Syntax
Parameter Set: ByName
Set-NetNatTransitionConfiguration [-Adapter <CimInstance> ] [-AsJob] [-CimSession <CimSession[]> ] [-InboundInterface <String[]> ] [-InstanceName <String[]> ] [-IPv4AddressPortPool <String[]> ] [-OutboundInterface <String[]> ] [-PassThru] [-PolicyStore <PolicyStore[]> ] [-PrefixMapping <String[]> ] [-State <State> ] [-TcpMappingTimeoutSeconds <UInt32> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Set-NetNatTransitionConfiguration -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-InboundInterface <String[]> ] [-IPv4AddressPortPool <String[]> ] [-OutboundInterface <String[]> ] [-PassThru] [-PrefixMapping <String[]> ] [-State <State> ] [-TcpMappingTimeoutSeconds <UInt32> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Detailed Description
The Set-NetNatTransitionConfiguration sets the NAT64 configuration on a computer.
Parameters
-Adapter<CimInstance>
Specifies the network adapter on which to apply the NAT64 configuration.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByValue) |
Accept Wildcard Characters? |
false |
-AsJob
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-CimSession<CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Aliases |
Session |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-InboundInterface<String[]>
Sets the interface on which the NAT64 is listening for the matching incoming IPv6 traffic.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-InputObject<CimInstance[]>
Specifies the NAT64 configuration object to set.
Aliases |
none |
Required? |
true |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByValue) |
Accept Wildcard Characters? |
false |
-InstanceName<String[]>
Specifies the instance of the NAT64 which is being configured.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-IPv4AddressPortPool<String[]>
Specifies the list of IPv4 address and port ranges to be used by NAT64 for creating the mappings from the IPv6 source address to the IPv4 target address. The format is a comma-separated list of <IPv4 address,Lowport-Highport>. Such as "10.0.0.2,1024-3388","10.0.0.2,4000-49023"
. The port value must be between 1024 and 65535. The wildcard character (*) can be specified to use the whole port range, such as 10.0.0.1,*
.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-OutboundInterface<String[]>
Sets the interface on which the NAT64 sends the translated IPv4 traffic.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-PolicyStore<PolicyStore[]>
Specifies to which policy store the NAT64 configuration is applied. The acceptable values for this parameter are: Persistent and Active. If this parameter is not specified, then the cmdlet operates on both active and persistent stores.
Aliases |
Store |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
True (ByPropertyName) |
Accept Wildcard Characters? |
false |
-PrefixMapping<String[]>
Sets the list of IPv6 address ranges to be translated by the NAT64. The format is a comma-separated list of <IPv6 prefix,IPv4 subnet>. Such as "69:FF9B::/96,0.0.0.0/0","66:FF9B::/96,192.2.0.0/8"
.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-State<State>
Sets the enabled state of the NAT64 configuration.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-TcpMappingTimeoutSeconds<UInt32>
Specifies the lifetime for a TCP mapping after which it is released by the NAT64. The minimum value is 1800 seconds.
The default value is 7200 seconds.
Aliases |
TcpMappingTimeout |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-ThrottleLimit<Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Confirm
Prompts you for confirmation before running the cmdlet.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
<CommonParameters>
This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Inputs
The input type is the type of the objects that you can pipe to the cmdlet.
- None
Outputs
The output type is the type of the objects that the cmdlet emits.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetNatTransitionConfiguration
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Examples
EXAMPLE 1
This example sets the NAT64 configuration for the instance named NAT64.
PS C:\> $nat64Prefix = "2009:1:2:3:4:5::/96"
PS C:\> $prefixMapping = "$nat64Prefix,0.0.0.0/0"
PS C:\> $portPool = "33.0.0.1,6000-10000"
PS C:\> Set-NetNatTransitionConfiguration -InstanceName NAT64 OutboundInterface corpnet -PrefixMapping $prefixMapping -IPv4AddressPortPool $portPool
Related topics
Disable-NetNatTransitionConfiguration
Enable-NetNatTransitionConfiguration
Get-NetNatTransitionConfiguration
Get-NetNatTransitionMonitoring