共用方式為


HVAR — Horizontal Metrics Variations Table (OpenType 1.8.2)

The 'HVAR' table is used in variable fonts to provide variations for horizontal glyph metrics values. This can be used to provide variation data for advance widths in the 'hmtx' table. In fonts with TrueType outlines, it can also be used to provide variation data for left and right side bearings obtained from the 'hmtx' table and glyph bounding box.

For a general overview of OpenType Font Variations and terminology related to variations, see the chapter, OpenType Font Variations Overview.

In a font with TrueType outlines, the rasterizer will generate “phantom” points that represent left, right, top and bottom side bearings. (See the chapter Instructing TrueType Glyphs for more background on phantom points.) In a TrueType variable font, the glyph variations ('gvar') table will include variation data for the phantom points of each glyph, allowing glyph metrics to be interpolated for different variation instances as part of deriving the interpolated glyph outlines. For this reason, the 'HVAR' table is not required in variable fonts that have TrueType outlines. For text-layout operations that require glyph metrics but not actual glyph outlines, however, there can be significant performance benefits by being able to obtain adjusted glyph metrics for an instance without needing to interpolate glyph outlines. For this reason, it is recommended that an 'HVAR' table be included in variable fonts that have TrueType outlines.

The CFF 2 rasterizer does not generate phantom points as in the TrueType rasterizer. For this reason, an 'HVAR' table is required to handle any variation in horizontal glyph metrics in a variable font with CFF 2 outlines.

Take note that, in a variable font with TrueType outlines, the left side bearing for each glyph must equal xMin, and bit 1 in the flags field of the 'head' table must be set.

The 'HVAR' table contains an item variation store table to represent variation data. The item variation store and constituent formats are described in the chapter, OpenType Font Variations Common Table Formats. The item variation store is also used in the 'VVAR', 'GDEF' and certain other tables, but is different from the formats for variation data used in the 'cvar' or 'gvar' tables.

The item variation store format uses delta-set indices to reference variation delta data for particular target, font-data items to which they are applied, such as the advance width of a particular glyph. Data external to the item variation store identifies the delta-set index to be used for each given target item. Within the 'HVAR' table, glyph IDs can be used as implicit indices for advance width variations, or an optional delta-set index mapping table can be used that explicitly provides delta-set indices for advance widths to be associated with each glyph ID.

An advance width mapping table adds additional data within the 'HVAR' table, but it also makes it possible to use a more compact representation of the data in the item variation store. For example, if multiple glyphs have the same advance widths, the mapping table allows all of them to reference a single delta set within the store. Additional optimizations within the item variation store are possible. See the Common Table Formats chapter for more discussion about size optimization. In general, inclusion of an advance width mapping is recommended.

Optional mapping tables can also be used to provide delta-set indices for glyph side bearings. In variable fonts with TrueType outlines, variation data for side bearings is recommended. If variation data for side bearings is provided, it should include data for both left and right side bearings. Mapping tables for left and right side bearings must also be included.

The 'HVAR' table is used only in variable fonts. It must be used in combination with a horizontal metrics ('hmtx') table, and also in combination with a font variations ('fvar') table, and other required or optional tables used in variable fonts. See Variation data tables and miscellaneous requirements in the OpenType Font Variations Overview chapter for general information.

For variable fonts that have TrueType outlines, the 'HVAR' table is optional but recommended. For variable fonts that have CFF 2 outlines, the 'HVAR' table is required if there is any variation in glyph advance widths across the variation space.

Note: The 'hdmx' table is not used in variable fonts.

Table Formats

The horizontal metrics variations table has the following format.

Horizontal metrics variations table:

Type Name Description
uint16 majorVersion Major version number of the horizontal metrics variations table — set to 1.
uint16 minorVersion Minor version number of the horizontal metrics variations table — set to 0.
Offset32 itemVariationStoreOffset Offset in bytes from the start of this table to the item variation store table.
Offset32 advanceWidthMappingOffset Offset in bytes from the start of this table to the delta-set index mapping for advance widths (may be NULL).
Offset32 lsbMappingOffset Offset in bytes from the start of this table to the delta-set index mapping for left side bearings (may be NULL).
Offset32 rsbMappingOffset Offset in bytes from the start of this table to the delta-set index mapping for right side bearings (may be NULL).

The item variation store table is documented in the chapter, OpenType Font Variations Common Table Formats.

Mapping tables are optional. If a given mapping table is not provided, the offset is set to NULL.

Variation data for advance widths is required. A delta-set index mapping table for advance widths can be provided, but is optional. If a mapping table is not provided, glyph indices are used as implicit delta-set indices. To access the delta set for the advance of given glyph, the delta-set outer-level index is zero, and the glyph ID is used as the inner-level index.

Variation data for side bearings are optional. If included, mapping tables are required to provide the delta-set index for each glyph.

The delta-set index mapping table has the following format.

DeltaSetIndexMap table:

Type Name Description
uint16 entryFormat A packed field that describes the compressed representation of delta-set indices. See details below.
uint16 mapCount The number of mapping entries.
uint8 mapData[variable] The delta-set index mapping data. See details below.

The mapCount field indicates the number of delta-set index mapping entries. Glyph IDs are used as the index into the mapping array. If a given glyph ID is greater than mapCount - 1, then the last entry is used.

Each mapping entry represents a delta-set outer-level index and inner-level index combination. Logically, each of these indices is a 16-bit, unsigned value. These are represented in a packed format that uses one, two, three or four bytes. The entryFormat field is a packed bitfield that describes the compressed representation used in the mapData field of the given deltaSetIndexMap table. The format of the entryFormat field is as follows:

EntryFormat Field Masks

Mask Name Description
0x000F INNER_INDEX_BIT_COUNT_MASK Mask for the low 4 bits, which give the count of bits minus one that are used in each entry for the inner-level index.
0x0030 MAP_ENTRY_SIZE_MASK Mask for bits that indicate the size in bytes minus one of each entry.
0xFFC0 Reserved Reserved for future use — set to 0.

The innerBitCountMask and mapEntrySizeMask enable the inner index to range in size from 1 to 16 bits, and the outer index to range in size from 0 to 31 bits, with the combined size determined by the mapEntrySizeMask. The size of each mapping entry is ((entryFormat & mapEntrySizeMask) >> 4 + 1). The total size of the map data array is entrySize * mapCount.

For a given entry, the outer-level and inner-level indices can be obtained as follows:

    outerIndex = entry >> ((entryFormat & innerIndexBitCountMask) + 1)

    innerIndex = entry & ((1 << ((entryFormat & innerIndexBitCountMask) + 1)) - 1)

Processing

When performing text layout using a particular variation instance of a variable font, the application will need to obtain adjusted glyph metrics for that instance. The application obtains default values from the 'hmtx' and 'glyf' tables, and uses the 'HVAR' table to obtain interpolated adjustment values that are applied to the defaults.

Delta-set indices are obtained based on the glyph ID. If there is no delta-set index mapping table for advance widths, then glyph IDs implicitly provide the indices: for a given glyph ID, the delta-set outer-level index is zero, and the glyph ID is the delta-set inner-level index.

If delta-set index mappings are provided, the outer- and inner-level indices are combined in a packed format that uses one to four bytes for each mapping entry. Each mapping table provides information describing the packed format; this is used to extract the separate outer- and inner-level indices.

The indices are used to reference a delta set within the item variation store for the target advance width or side bearing. The two-level organization of data within the item variation store is described in the chapter OpenType Font Variations Common Table Formats. Each delta set includes different deltas that apply to variation instances falling within different regions of the variation space. The process by which the deltas are processed to derive an interpolated value for a given target item is described in the chapter, OpenType Font Variations Overview.