共用方式為


MSBuild 目標

依特定順序將目標設為群組工作,並允許將建置處理序分成較小的單位。 例如,一個目標可能會刪除輸出目錄中的所有檔案來準備進行建置,而另一個目標會編譯專案的輸入,並將它們放在空目錄中。 如需工作的詳細資訊,請參閱工作

在專案檔中宣告目標

在專案檔中,目標是使用 Target 項目所宣告。 例如,下列 XML 會建立名為 Construct 的目標,其接著會呼叫具有 Compile 項目類型的 Csc 工作。

<Target Name="Construct">
    <Csc Sources="@(Compile)" />
</Target>

與 MSBuild 屬性相同,可以重新定義目標。 例如,

<Target Name="MyTarget">
    <Message Text="First occurrence" />
</Target>
<Target Name="MyTarget">
    <Message Text="Second occurrence" />
</Target>

如果 MyTarget 執行,其只會顯示「第二次出現」,因為 MyTarget 的第二個定義會隱藏第一個。

MSBuild 需相依於匯入順序,且目標的最後一個定義將會是系統所使用的定義。 如果您嘗試重新定義目標,則稍後定義內建目標時不會生效。

目標組建順序

如果某一個目標的輸入相依於另一個目標的輸出,則必須排序目標。

有幾種方式可指定目標的執行順序。

  • 初始目標

  • 預設目標

  • 第一個目標

  • 目標相依性

  • BeforeTargetsAfterTargets

目標絕對不會在單一建置期間執行兩次,即使組建中的後續目標相依於它也一樣。 執行目標之後,它對組建而言就已功成身退了。

如需目標建置順序的詳細資料和詳細資訊,請參閱目標建置順序

SDK 樣式專案

許多較新的專案都會使用 SDK,這表示其在根 Project 元素上使用 Sdk 屬性;例如 <Project Sdk="Microsoft.NET.Sdk">。 請參閱參考專案 SDK。 在此情況下,某些目標的定義順序不一定很明顯,因為目標匯入會在專案檔結尾之後隱含新增。 在舊版 MSBuild 中,或在未使用 Sdk 屬性的專案中,藉由覆寫 Build 目標 AfterBuildBeforeBuild 來擴充目標的行為是常見的做法。 不過,這不適用於使用 SDK 的專案,因為 AfterBuild 定義於在專案檔中所有其他程式碼之後的隱含匯入。 因此,若要擴充現有目標的行為,請建立新的目標,並指定 BeforeTargets (或視情況指定 AfterTargets),如下所示:

<Target Name="MessageBeforePublish" BeforeTargets="BeforePublish">
  <Message Text="BeforePublish" Importance="high" />
</Target>

為您的目標提供描述性名稱,就像您在程式碼中命名函式一樣。

在某些情況下,例如處理使用 AfterBuild 的舊版組建指令碼時,您可以避免使用 Sdk 屬性,而改成變更為明確匯入。 若要轉換 SDK 樣式專案以使用明確匯入,請移除 Sdk="{SdkName}" 屬性並新增兩個匯入,如下所示:專案檔開頭附近的 <import Project="{SdkName}.props">,以及結尾附近的 <import Project="{Sdkname}.targets">。 進行該變更之後,您可以在匯入 {Sdkname}.targets 檔案的匯入元素之後重新定義 AfterBuild

目標批次處理

目標元素可能有 Outputs 屬性,其以 %(<中繼資料>) 形式指定中繼資料。 如果是這樣,MSBuild 會為每個唯一的中繼資料值執行一次目標,並分組或「批次處理」具有該中繼資料值的項目。 例如,

<ItemGroup>
    <Reference Include="System.Core">
      <RequiredTargetFramework>3.5</RequiredTargetFramework>
    </Reference>
    <Reference Include="System.Xml.Linq">
      <RequiredTargetFramework>3.5</RequiredTargetFramework>
    </Reference>
    <Reference Include="Microsoft.CSharp">
      <RequiredTargetFramework>4.0</RequiredTargetFramework>
    </Reference>
</ItemGroup>
<Target Name="AfterBuild"
    Outputs="%(Reference.RequiredTargetFramework)">
    <Message Text="Reference:
      @(Reference->'%(RequiredTargetFramework)')" />
</Target>

依其 RequiredTargetFramework 中繼資料,批次處理 Reference 項目。 目標的輸出如下所示:

Reference: 3.5;3.5
Reference: 4.0

目標批次處理很少用於真實的組建。 工作批次處理較為常見。 如需詳細資訊,請參閱批次處理

累加組建

累加組建是已最佳化的建置,因此不會執行輸出檔案與其相關對應輸入檔案為最新的目標。 目標項目可能有 InputsOutputs 屬性,並指出目標預期作為輸入的項目,以及它產生作為輸出的項目。

如果所有輸出項目都是最新的,則 MSBuild 會略過目標,這可大幅改善建置速度。 這稱為目標的累加組建。 如果只有某些檔案是最新的,則 MSBuild 會執行沒有最新項目的目標。 這稱為目標的部分累加組建。 如需詳細資訊,請參閱累加建置

SDK 和預設建置目標

某些建置目標取決於您參考的 SDK (如果有的話)。 若要取得專案檔可用的所有目標,請使用 -targets-ts 命令列選項。 請參閱 MSBuild 命令列參考。 建置系統包含大量目標以供組建內部使用,其通常以目標名稱開頭的底線 (_) 表示。 若只要取得公用目標清單,請嘗試透過管線將輸出傳送到可篩選出底線的項目。 例如,在 bash 中使用 dotnet build 時,您可以執行下列動作:

dotnet build -targets path/to/project.csproj | grep -v '_'

在 PowerShell 中,您可使用下列項目進行篩選:

 dotnet build -targets path\to\project.csproj | select-string -pattern '_' -NotMatch

如果您未使用 .NET,請使用 MSBuild.exe -ts 取代 dotnet build -ts,後面接著相同的管線和篩選作業。

如需 .NET SDK 目標的清單,請參閱 Microsoft.NET.Publish.targets。 您可以在 .NET SDK 安裝資料夾中找到此檔案。 其他 SDK 在其安裝資料夾中有類似的 .targets 檔案,您可加以瀏覽。

有些目標 (預設目標) 是 .NET 建置系統的一部分,且無論您是否指定 SDK 都會被參考。 C++ 專案有自己的預設目標集。 請參閱 C++ 專案的 MSBuild 內部項目

下列清單顯示 .NET 建置系統中的預設公用目標 (來自 Microsoft.Common.CurrentVersion.Targets):

===================================================
Build
The main build entry point.
===================================================
<Target Name="Build"
        Condition=" '$(_InvalidConfigurationWarning)' != 'true' "
        DependsOnTargets="$(BuildDependsOn)"
        Returns="$(TargetPath)" />

===================================================
BeforeBuild
===================================================
<Target Name="BeforeBuild"/>

===================================================
AfterBuild
===================================================
<Target Name="AfterBuild"/>

===================================================
CoreBuild
The core build step calls each of the build targets.
===================================================
<Target Name="CoreBuild"
        DependsOnTargets="$(CoreBuildDependsOn)">

===================================================
Rebuild
Delete all intermediate and final build outputs, and then build the project from scratch.
===================================================
<Target Name="Rebuild"
        Condition=" '$(_InvalidConfigurationWarning)' != 'true' "
        DependsOnTargets="$(RebuildDependsOn)"
        Returns="$(TargetPath)"/>

===================================================
BeforeRebuild
===================================================
<Target Name="BeforeRebuild"/>

===================================================
AfterRebuild
===================================================
<Target Name="AfterRebuild"/>

===================================================
BuildGenerateSources
Set BuildPassReferences to enable P2P builds
===================================================
<Target Name="BuildGenerateSources"
        DependsOnTargets="BuildGenerateSourcesTraverse;$(BuildGenerateSourcesAction)" />

===================================================
BuildCompile
===================================================
<Target Name="BuildCompile"
        DependsOnTargets="BuildCompileTraverse;$(BuildCompileAction)" />

===================================================
BuildLink
===================================================
<Target Name="BuildLink"
        DependsOnTargets="BuildLinkTraverse;$(BuildLinkAction)" />

===================================================
CopyRunEnvironmentFiles
Copy environment files necessary to run the user's app to the final directory.
This is a public target that can be invoked by an IDE.
This may be used by an IDE to make the app.config file available for running
the target app.
===================================================
<Target
        Name="CopyRunEnvironmentFiles"
        DependsOnTargets="PrepareForBuild;SetWin32ManifestProperties;_CopyAppConfigFile;_CleanRecordFileWrites"/>

===================================================
Run
Run the final build output if it is a .EXE
===================================================
<Target
        Name="Run"
        DependsOnTargets="$(RunDependsOn)">

===================================================
BuildOnlySettings
This target is called only when doing a real build.  It is specifically not called during project load.
===================================================
<Target Name="BuildOnlySettings">

===================================================
PrepareForBuild
Prepare the prerequisites for building.
===================================================
<Target Name="PrepareForBuild"
        DependsOnTargets="$(PrepareForBuildDependsOn)">

===================================================
GetFrameworkPaths
Get the paths for the .NET Framework installation directory

These paths are not used directly by this .targets file but are available for pre and
post build steps.

This is a generally overridden target. For example, it's overridden in the Microsoft.NETFramework.targets file.
===================================================
<Target Name="GetFrameworkPaths"/>

===================================================
GetReferenceAssemblyPaths
Get the paths for the Reference Assemblies for the known versions of the
.NET Framework.

These paths are used by the build process in order to resolve the correct
assemblies from the various directories, and to support multi-targeting
===================================================
<Target Name="GetReferenceAssemblyPaths"
        DependsOnTargets="$(GetReferenceAssemblyPathsDependsOn)">

===================================================
AssignLinkMetadata
For items of a certain set of allowed types, make sure that
if they are defined in a file other than the project file, that 
they have "Link" metadata set to an appropriate default. 
===================================================
<Target Name="AssignLinkMetadata"
        Condition=" '$(SynthesizeLinkMetadata)' == 'true' ">

===================================================
PreBuildEvent
Run the pre-build event if there is one.
===================================================
<Target Name="PreBuildEvent"
        Condition="'$(PreBuildEvent)'!=''"
        DependsOnTargets="$(PreBuildEventDependsOn)">

===================================================
UnmanagedUnregistration
If the main assembly had previously been registered for COM interop, unregister it now.
We will re-register the new version after it has been built.
===================================================
<Target Name="UnmanagedUnregistration"
        Condition="(('$(_AssemblyTimestampBeforeCompile)' != '$(_AssemblyTimestampAfterCompile)' or '$(RegisterForComInterop)' != 'true' or '$(OutputType)' != 'library') or
                                ('$(_AssemblyTimestampBeforeCompile)' == '')) and
                                Exists('@(_UnmanagedRegistrationCache)')"
        DependsOnTargets="$(UnmanagedUnregistrationDependsOn)">

===================================================
GetTargetFrameworkVersion
This stand-alone target returns the target framework version (i.e. v3.5, v4.0, etc.)
that would be used if we built this project.
===================================================
<Target
        Name="GetTargetFrameworkVersion"
        Returns="$(TargetFrameworkVersion)" />

===================================================
ResolveReferences
===================================================
<Target Name="ResolveReferences"
        DependsOnTargets="$(ResolveReferencesDependsOn)"/>

===================================================
BeforeResolveReferences
===================================================
<Target Name="BeforeResolveReferences"/>

===================================================
AfterResolveReferences
===================================================
<Target Name="AfterResolveReferences"/>

===================================================
AssignProjectConfiguration
Assigns the appropriate configuration to each project in the list of project references passed in.
Adds to the project references passed in any project references implied by dependencies expressed in the solution file, if any.
===================================================
<Target Name="AssignProjectConfiguration"
        Condition="'$(CurrentSolutionConfigurationContents)' != '' or '@(ProjectReference)'!=''">

===================================================
ResolveProjectReferences
Build referenced projects
===================================================
<Target Name="ResolveProjectReferences"
        DependsOnTargets="AssignProjectConfiguration;_SplitProjectReferencesByFileExistence"
        Returns="@(_ResolvedNativeProjectReferencePaths);@(_ResolvedProjectReferencePaths)">

===================================================
GetTargetPath
This stand-alone target returns the name of the build product (i.e. EXE, DLL)
that would be produced if we built this project.
===================================================
<Target Name="GetTargetPath"
        DependsOnTargets="$(GetTargetPathDependsOn)"
        Returns="$(TargetPath)"/>

===================================================
GetTargetPathWithTargetPlatformMoniker
This stand-alone target returns the name and version of the target platform for this project.
===================================================
<Target Name="GetTargetPathWithTargetPlatformMoniker"
        DependsOnTargets="$(GetTargetPathWithTargetPlatformMonikerDependsOn)"
        Returns="@(TargetPathWithTargetPlatformMoniker)">

===================================================
GetNativeManifest
Compute the manifest item for this project.
===================================================
<Target
        Name="GetNativeManifest"
        Returns="@(ComputedApplicationManifest)">

===================================================
ResolveNativeReferences
Resolve native references
===================================================
<Target Name="ResolveNativeReferences"
        Condition="'@(NativeReference)'!=''"
        DependsOnTargets="ResolveProjectReferences">

===================================================
ResolveAssemblyReferences
Given the list of assemblies, find the closure of all assemblies that they depend on. These are
what we need to copy to the output directory.

[IN]
@(Reference) - List of assembly references as fusion names.
@(_ResolvedProjectReferencePaths) - List of project references produced by projects that this project depends on.

        The 'Private' attribute on the reference corresponds to the Copy Local flag in IDE.
        The 'Private' flag can have three possible values:
                - 'True' means the reference should be Copied Local
                - 'False' means the reference should not be Copied Local
                - [Missing] means this task will decide whether to treat this reference as CopyLocal or not.

[OUT]
@(ReferencePath) - Paths to resolved primary files.
@(ReferenceDependencyPaths) - Paths to resolved dependency files.
@(_ReferenceRelatedPaths) - Paths to .xmls and .pdbs.
@(ReferenceSatellitePaths) - Paths to satellites.
@(_ReferenceSerializationAssemblyPaths) - Paths to XML serialization assemblies created by sgen.
@(_ReferenceScatterPaths) - Paths to scatter files.
@(ReferenceCopyLocalPaths) - Paths to files that should be copied to the local directory.
===================================================
<Target Name="ResolveAssemblyReferences"
        Returns="@(ReferencePath)"
        DependsOnTargets="$(ResolveAssemblyReferencesDependsOn)">

===================================================
GenerateBindingRedirects
Inject the binding redirects into the app config file based on suggested redirects as output from ResolveAssemblyReferences.

[IN]
@(AppConfigWithTargetPath) - Path to the source app config file. This can be null if the project 
                                                        doesn't contain an app config file.
$(TargetFileName) -          The file name of the build target.

[OUT]
@(OutputAppConfigFile) -     Path to the output app config file in the intermediate directory.
===================================================
<Target Name="GenerateBindingRedirects"
        Inputs="$(MSBuildAllProjects);@(AppConfigFile);$(ResolveAssemblyReferencesStateFile);$(IntermediateOutputPath);@(SuggestedBindingRedirects)"
        Outputs="$(_GenerateBindingRedirectsIntermediateAppConfig)"
        Condition="'$(AutoGenerateBindingRedirects)' == 'true' and '$(GenerateBindingRedirectsOutputType)' == 'true'">

===================================================
GenerateBindingRedirectsUpdateAppConfig
Updates the project to use the generated app.config content.  This needs to run regardless of 
inputs/outputs so it is separate from GenerateBindingRedirects.
===================================================
<Target Name="GenerateBindingRedirectsUpdateAppConfig"
        AfterTargets="GenerateBindingRedirects"
        Condition="'$(AutoGenerateBindingRedirects)' == 'true' and '$(GenerateBindingRedirectsOutputType)' == 'true' and Exists('$(_GenerateBindingRedirectsIntermediateAppConfig)')">

===================================================
GetInstalledSDKs
Gets the list of SDKs installed in the SDKDirectoryRoot and SDKRegistryRoot locations
These paths are used by the ResolveSDKReference task and the ResolveAssemblyReference task.
===================================================
<Target Name="GetInstalledSDKLocations"
      DependsOnTargets="$(GetInstalledSDKLocationsDependsOn)"
      Returns="@(InstalledSDKLocations)" />

===================================================
ResolveSDKReferences
Given a list of SDKReference items and a list of resolved winmd files which may contain metadata as to which sdk they came from
we need to find the sdk root folders on disk and populate a ResolvedSDKReference item which has the full path to the SDK ROOT 
and the sdk identity as a piece of metadata.
===================================================
<Target Name="ResolveSDKReferences"
        Returns="@(ResolvedSDKReference)"
        DependsOnTargets="$(ResolveSDKReferencesDependsOn)">

===================================================
FindInvalidProjectReferences
Find project to project references with target platform version higher than the one used by the current project and 
creates a list of invalid references to be unresolved. It issues a warning for each invalid reference.
===================================================
<Target Name="FindInvalidProjectReferences"
        Condition ="'$(FindInvalidProjectReferences)' == 'true'"
        DependsOnTargets="$(FindInvalidProjectReferencesDependsOn)">

===================================================
ExpandSDKReferences
After we have resolved the sdk reference we need to make sure that we automatically include the references which are part of the SDK (both winmd and dll)
as part of the assemblies passed to the compiler.

Project systems or project which do not want to reference all dlls or winmd files should override this target to do nothing.
===================================================
<Target Name="ExpandSDKReferences"
        Returns="@(ReferencesFromSDK)"
        DependsOnTargets="$(ExpandSDKReferencesDependsOn)" />

===================================================
ExportWindowsMDFile
When a project is generating a winmd file through c# or vb, ect the compiler will create a WinMDModule file. This file needs to be run
through the winmdexp tool in order to generate the resulting WinMD file.
===================================================
<Target Name="ExportWindowsMDFile"
        DependsOnTargets="Compile"
        Condition="'$(ExportWinMDFile)' == 'true'"
        Inputs="@(IntermediateAssembly);@(DocFileItem);@(_DebugSymbolsIntermediatePath);@(ReferencePath);$(MSBuildAllProjects)"
        Outputs="$(_IntermediateWindowsMetadataPath);$(WinMDExpOutputPdb);$(WinMDOutputDocumentationFile)" />

===================================================
DesignTimeResolveAssemblyReferences
Given the list of assemblies, resolve their reference paths.
This target is called by Visual Studio at run time in order to filter references
according to the targeted framework.
===================================================
<Target Name="DesignTimeResolveAssemblyReferences"
        Condition="'$(DesignTimeReference)'!=''"
        DependsOnTargets="$(DesignTimeResolveAssemblyReferencesDependsOn)">

===================================================
ResolveComReferences
Resolve COM references
===================================================
<Target Name="ResolveComReferences"
        Condition="'@(COMReference)'!='' or '@(COMFileReference)'!=''"
        Returns="@(ReferencePath)"
        DependsOnTargets="PrepareForBuild;ResolveKeySource;ResolveAssemblyReferences" />

===================================================
PrepareResources
Prepare resources for the Compile step.
===================================================
<Target Name="PrepareResources"
        DependsOnTargets="$(PrepareResourcesDependsOn)"/>

===================================================
PrepareResourceNames
Prepare the names of resource files.
===================================================
<Target Name="PrepareResourceNames"
        DependsOnTargets="$(PrepareResourceNamesDependsOn)"/>

===================================================
AssignTargetPaths
This target creates <TargetPath> tags for items. <TargetPath> is a relative folder plus filename
for the destination of this item.
===================================================
<Target Name="AssignTargetPaths"
        DependsOnTargets="$(AssignTargetPathsDependsOn)">

===================================================
GetItemTargetPaths
This target returns all items that have TargetPath metadata assigned by the AssignTargetPaths target.
===================================================
<Target Name="GetItemTargetPaths"
        DependsOnTargets="AssignTargetPaths"
        Returns="
        @(EmbeddedResource);
        @(ContentWithTargetPath);
        @(_NoneWithTargetPath);
        @(_DeploymentBaseManifestWithTargetPath);
        " />

===================================================
SplitResourcesByCulture
Split EmbeddedResource items into five lists based on whether
they are resx files, licx files or other resources and whether they should be localized. Also adds Type and Culture
metadata. Type indicates whether the resource is "Resx" or "Non-Resx".
===================================================
<Target Name="SplitResourcesByCulture"
        DependsOnTargets="AssignTargetPaths">

===================================================
CreateCustomManifestResourceNames
Allows custom manifest resource name generation tasks to plug
into the build process
===================================================
<Target Name="CreateCustomManifestResourceNames"
        DependsOnTargets="$(CreateCustomManifestResourceNamesDependsOn)"/>

===================================================
ResGen
Run GenerateResource on the given resx files.
===================================================
<Target Name="ResGen"
        DependsOnTargets="$(ResGenDependsOn)"/>

===================================================
BeforeResGen
===================================================
<Target Name="BeforeResGen"/>

===================================================
AfterResGen
===================================================
<Target Name="AfterResGen"/>

===================================================
ResolveKeySource
Resolve the strong name key used to sign the assembly as well as the certificate used to
sign the ClickOnce manifests.
===================================================
<Target Name="ResolveKeySource"
        Condition="$(SignManifests) == 'true' or $(SignAssembly) == 'true'">

===================================================
Compile
===================================================
<Target Name="Compile"
        DependsOnTargets="$(CompileDependsOn)"/>

===================================================
GenerateTargetFrameworkMonikerAttribute
Emit the target framework moniker attribute as  a code fragment into a temporary source file for the compiler.
===================================================
<Target Name="GenerateTargetFrameworkMonikerAttribute"
        BeforeTargets="BeforeCompile"
        DependsOnTargets="PrepareForBuild;GetReferenceAssemblyPaths"
        Inputs="$(MSBuildToolsPath)\Microsoft.Common.targets"
        Outputs="$(TargetFrameworkMonikerAssemblyAttributesPath)"
        Condition="'$(GenerateTargetFrameworkAttribute)' == 'true'">

===================================================
GenerateAdditionalSources
Emit any specified code fragments into a temporary source file for the compiler.
===================================================
<Target Name="GenerateAdditionalSources"
        BeforeTargets="BeforeCompile"
        DependsOnTargets="PrepareForBuild;GetReferenceAssemblyPaths"
        Inputs="$(MSBuildAllProjects)"
        Outputs="$(AssemblyAttributesPath)"
        Condition="'@(AssemblyAttributes)' != '' and '$(GenerateAdditionalSources)' == 'true'">

===================================================
BeforeCompile
===================================================
<Target Name="BeforeCompile"/>

===================================================
AfterCompile
===================================================
<Target Name="AfterCompile"/>

===================================================
GenerateSerializationAssemblies
Run GenerateSerializationAssemblies on the assembly produced by this build.
===================================================
<Target Name="GenerateSerializationAssemblies"
        Condition="'$(_SGenGenerateSerializationAssembliesConfig)' == 'On' or ('@(WebReferenceUrl)'!='' and '$(_SGenGenerateSerializationAssembliesConfig)' == 'Auto')"
        DependsOnTargets="AssignTargetPaths;Compile;ResolveKeySource"
        Inputs="$(MSBuildAllProjects);@(IntermediateAssembly)"
        Outputs="$(IntermediateOutputPath)$(_SGenDllName)">

===================================================
CreateSatelliteAssemblies
Create one satellite assembly for every unique culture in the resources.
===================================================
<Target Name="CreateSatelliteAssemblies"
        DependsOnTargets="$(CreateSatelliteAssembliesDependsOn)" />

===================================================
GenerateSatelliteAssemblies
Actually run al.exe to create the satellite assemblies.
===================================================
<Target Name="GenerateSatelliteAssemblies"
        Inputs="$(MSBuildAllProjects);@(_SatelliteAssemblyResourceInputs);$(IntermediateOutputPath)$(TargetName)$(TargetExt)"
        Outputs="$(IntermediateOutputPath)%(Culture)\$(TargetName).resources.dll"
        Condition="'@(_SatelliteAssemblyResourceInputs)' != ''">

===================================================
ComputeIntermediateSatelliteAssemblies
Compute the paths to the intermediate satellite assemblies,
with culture attributes so we can copy them to the right place.
===================================================
<Target Name="ComputeIntermediateSatelliteAssemblies"
        Condition="@(EmbeddedResource->'%(WithCulture)') != ''"
        DependsOnTargets="$(ComputeIntermediateSatelliteAssembliesDependsOn)">

===================================================
SetWin32ManifestProperties
Set Win32Manifest and EmbeddedManifest properties to be used later in the build.
===================================================
<Target Name="SetWin32ManifestProperties"
        Condition="'$(Win32Manifest)'==''"
        DependsOnTargets="ResolveComReferences;ResolveNativeReferences;_SetExternalWin32ManifestProperties;_SetEmbeddedWin32ManifestProperties" />

===================================================
GenerateManifests
Generates ClickOnce application and deployment manifests or a native manifest.
===================================================
<Target Name="GenerateManifests"
        Condition="'$(GenerateClickOnceManifests)'=='true' or '@(NativeReference)'!='' or '@(ResolvedIsolatedComModules)'!='' or '$(GenerateAppxManifest)' == 'true'"
        DependsOnTargets="$(GenerateManifestsDependsOn)"/>

===================================================
GenerateApplicationManifest
Generates a ClickOnce or native application manifest.
An application manifest specifies declarative application identity, dependency and security information.
===================================================
<Target Name="GenerateApplicationManifest"
        DependsOnTargets="
                _DeploymentComputeNativeManifestInfo;
                _DeploymentComputeClickOnceManifestInfo;
                ResolveComReferences;
                ResolveNativeReferences;
                _GenerateResolvedDeploymentManifestEntryPoint"
        Inputs="
                $(MSBuildAllProjects);
                @(AppConfigWithTargetPath);
                $(_DeploymentBaseManifest);
                @(ResolvedIsolatedComModules);
                @(_DeploymentManifestDependencies);
                @(_DeploymentResolvedManifestEntryPoint);
                @(_DeploymentManifestFiles)"
        Outputs="@(ApplicationManifest)">

===================================================
GenerateDeploymentManifest
Generates a ClickOnce deployment manifest.
A deployment manifest specifies declarative application identity and application update information.
===================================================
<Target Name="GenerateDeploymentManifest"
        DependsOnTargets="GenerateApplicationManifest"
        Inputs="
                $(MSBuildAllProjects);
                @(ApplicationManifest)
                "
        Outputs="@(DeployManifest)">

===================================================
PrepareForRun
Copy the build outputs to the final directory if they have changed.
===================================================
<Target Name="PrepareForRun"
        DependsOnTargets="$(PrepareForRunDependsOn)"/>

===================================================
CopyFilesToOutputDirectory
Copy all build outputs, satellites and other necessary files to the final directory.
===================================================
<Target Name="CopyFilesToOutputDirectory"
        DependsOnTargets="
                ComputeIntermediateSatelliteAssemblies;
                _CopyFilesMarkedCopyLocal;
                _CopySourceItemsToOutputDirectory;
                _CopyAppConfigFile;
                _CopyManifestFiles;
                _CheckForCompileOutputs;
                _SGenCheckForOutputs">

===================================================
GetCopyToOutputDirectoryItems
Get all project items that may need to be transferred to the output directory.
This includes baggage items from transitively referenced projects. It would appear
that this target computes full transitive closure of content items for all referenced
projects; however that is not the case. It only collects the content items from its
immediate children and not children of children. The reason this happens is that
the ProjectReferenceWithConfiguration list that is consumed by _SplitProjectReferencesByFileExistence
is only populated in the current project and is empty in the children. The empty list
causes _MSBuildProjectReferenceExistent to be empty and terminates the recursion.
===================================================
<Target Name="GetCopyToOutputDirectoryItems"
        Returns="@(AllItemsFullPathWithTargetPath)"
        KeepDuplicateOutputs=" '$(MSBuildDisableGetCopyToOutputDirectoryItemsOptimization)' == '' "
        DependsOnTargets="$(GetCopyToOutputDirectoryItemsDependsOn)">

===================================================
UnmanagedRegistration
Registers the main assembly for COM interop.
===================================================
<Target Name="UnmanagedRegistration"
        Condition="'$(RegisterForComInterop)'=='true' and '$(OutputType)'=='library'"
        DependsOnTargets="$(UnmanagedRegistrationDependsOn)" />>

===================================================
IncrementalClean
Remove files that were produced in a prior build but weren't produced in the current build.
The reason is that if, for example, the name of the .exe has changed we want to delete the
old copy.

Leave the Clean cache file containing only the files produced in the current build.
===================================================
<Target Name="IncrementalClean"
        DependsOnTargets="_CleanGetCurrentAndPriorFileWrites">

===================================================
Clean
Delete all intermediate and final build outputs.
===================================================
<Target Name="Clean"
        Condition=" '$(_InvalidConfigurationWarning)' != 'true' "
        DependsOnTargets="$(CleanDependsOn)" />

===================================================
BeforeClean
===================================================
<Target Name="BeforeClean"/>

===================================================
AfterClean
===================================================
<Target Name="AfterClean"/>

===================================================
CleanReferencedProjects
Call Clean target on all Referenced Projects.
===================================================
<Target Name="CleanReferencedProjects"
        DependsOnTargets="AssignProjectConfiguration; _SplitProjectReferencesByFileExistence">

===================================================
CleanPublishFolder
===================================================
<Target Name="CleanPublishFolder"/>

===================================================
PostBuildEvent
Run the post-build event. This step is driven by two parameters:

(1) The $(RunPostBuildEvent) property is set by the user through the IDE and can be one of four values.

        - OnBuildSuccess: In this case, every step of the build must succeed for the post-build step to run.
        - <Blank>: This is the same as OnBuildSuccess.
        - OnOutputUpdated: In this case, the post-build step will run only if the main output assembly was
        actually updated.
        - Always: The post-build step is always run.

(2) The $(_AssemblyTimestampBeforeCompile) and $(_AssemblyTimestampAfterCompile) values are
        set by the _TimeStampBeforeCompile and _TimeStampAfterCompile targets.  If the assembly was actually
        rebuilt during this build, then the two values will be different.
===================================================
<Target Name="PostBuildEvent"
        Condition="'$(PostBuildEvent)' != '' and ('$(RunPostBuildEvent)' != 'OnOutputUpdated' or '$(_AssemblyTimestampBeforeCompile)' != '$(_AssemblyTimestampAfterCompile)')"
        DependsOnTargets="$(PostBuildEventDependsOn)">

===================================================
Publish
This target is only called when doing ClickOnce publishing outside the IDE, which implicitly builds before publishing.
===================================================
<Target Name="Publish"
        DependsOnTargets="$(PublishDependsOn)"/>

===================================================
SetGenerateManifests
This target simply assures the GenerateClickOnceManifests property is set whenever the publish target is invoked.
===================================================
<Target Name="SetGenerateManifests"/>

===================================================
PublishOnly
The "PublishOnly" target is intended for ClickOnce publishing inside the IDE, where the build has already been done
by the BuildManager.
===================================================
<Target Name="PublishOnly"
        DependsOnTargets="$(PublishOnlyDependsOn)"/>

===================================================
BeforePublish
===================================================
<Target Name="BeforePublish"/>

===================================================
AfterPublish
===================================================
<Target Name="AfterPublish"/>

===================================================
PublishBuild
Defines the set of targets that publishing is directly dependent on.
===================================================
<Target Name="PublishBuild"
        DependsOnTargets="$(PublishBuildDependsOn)"/>

===================================================
AllProjectOutputGroups
The targets below drive output groups, which provide generic information about a
project's inputs (e.g., content files, compilation sources, etc.) and built outputs
(e.g., built EXE/DLL, PDB, XML documentation files, etc.)

Each target may produce two kinds of items:  outputs and dependencies.  Outputs are
items from the current project; dependencies are items that are brought into the
current project as a result of referencing other projects or components.

For both outputs and dependencies, the Include attribute
specifies the location of the output/dependency; it must be a full path.  Any number
of additional attributes may be placed on an output/dependency item.
===================================================
<Target Name="AllProjectOutputGroups"
        DependsOnTargets="
                BuiltProjectOutputGroup;
                DebugSymbolsProjectOutputGroup;
                DocumentationProjectOutputGroup;
                SatelliteDllsProjectOutputGroup;
                SourceFilesProjectOutputGroup;
                ContentFilesProjectOutputGroup;
                SGenFilesOutputGroup"/>

===================================================
BuiltProjectOutputGroup
This target performs population of the Build project output group.
===================================================
<Target Name="BuiltProjectOutputGroup"
        Returns="@(BuiltProjectOutputGroupOutput)"
        DependsOnTargets="$(BuiltProjectOutputGroupDependsOn)">

===================================================
DebugSymbolsProjectOutputGroup
This target performs population of the Debug Symbols project output group.
===================================================
<Target Name="DebugSymbolsProjectOutputGroup"
        Returns="@(DebugSymbolsProjectOutputGroupOutput)"
        DependsOnTargets="$(DebugSymbolsProjectOutputGroupDependsOn)"/>

===================================================
DocumentationProjectOutputGroup
This target performs population of the Documentation project output group.
===================================================
<Target Name="DocumentationProjectOutputGroup"
        Returns="@(DocumentationProjectOutputGroupOutput)"
        DependsOnTargets="$(DocumentationProjectOutputGroupDependsOn)"/>

===================================================
SatelliteDllsProjectOutputGroup
This target performs population of the Satellite Files project output group.
===================================================
<Target Name="SatelliteDllsProjectOutputGroup"
        Returns="@(SatelliteDllsProjectOutputGroupOutput)"
        DependsOnTargets="$(SatelliteDllsProjectOutputGroupDependsOn)">

===================================================
SourceFilesProjectOutputGroup
This target performs population of the Source Files project output group.
Source files are items in the project whose type is "Compile" and "EmbeddedResource".
===================================================
<Target Name="SourceFilesProjectOutputGroup"
        Returns="@(SourceFilesProjectOutputGroupOutput)"
        DependsOnTargets="$(SourceFilesProjectOutputGroupDependsOn)">

===================================================
ContentFilesProjectOutputGroup
This target performs population of the Content Files project output group.
Content files are items in the project whose type is "Content".
===================================================
<Target Name="ContentFilesProjectOutputGroup"
        Returns="@(ContentFilesProjectOutputGroupOutput)"
        DependsOnTargets="$(ContentFilesProjectOutputGroupDependsOn)">

===================================================
SGenFilesOutputGroup
This target performs population of the GenerateSerializationAssemblies Files project output group.
GenerateSerializationAssemblies files are those generated by the GenerateSerializationAssemblies target and task.
===================================================
<Target Name="SGenFilesOutputGroup"
        Returns="@(SGenFilesOutputGroupOutput)"
        DependsOnTargets="$(SGenFilesOutputGroupDependsOn)"/>

===================================================
GetResolvedSDKReferences
These targets are to gather information from the SDKs.
===================================================
<Target Name="GetResolvedSDKReferences"
        DependsOnTargets="ResolveSDKReferences"
        Returns="@(ResolvedSDKReference)"/>

===================================================
PriFilesOutputGroup
This target performs population of the pri files output group
===================================================
<Target Name="PriFilesOutputGroup"
        Condition="'@(_ReferenceRelatedPaths)' != ''"
        DependsOnTargets="BuildOnlySettings;PrepareForBuild;AssignTargetPaths;ResolveReferences"
        Returns="@(PriFilesOutputGroupOutput)">

===================================================
SDKRedistOutputGroup
This target gathers the Redist folders from the SDKs which have been resolved.
===================================================
<Target Name="SDKRedistOutputGroup"
        Returns="@(SDKRedistOutputGroupOutput)"
        DependsOnTargets="$(SDKRedistOutputGroupDependsOn)"/>