共用方式為


使用圖說文字來深入檢查資料流程資料

當圖說文字檢查資料流程資料時,其 classifyFn 圖說文字函式可以檢查固定資料欄位、元資料欄位,以及傳遞給它的原始資料流程資料,以及任何已儲存在與篩選或資料流程相關聯之內容中的相關資料。

例如:

// classifyFn callout function
VOID NTAPI
 ClassifyFn(
    IN const FWPS_INCOMING_VALUES0  *inFixedValues,
    IN const FWPS_INCOMING_METADATA_VALUES0  *inMetaValues,
    IN OUT VOID  *layerData,
    IN const FWPS_FILTER0  *filter,
    IN UINT64  flowContext,
    IN OUT FWPS_CLASSIFY_OUT  *classifyOut
    )
{
  FWPS_STREAM_CALLOUT_IO_PACKET0 *ioPacket;
  FWPS_STREAM_BUFFER0 *dataStream;
  UINT32 bytesRequired;
  SIZE_T bytesToPermit;
  SIZE_T bytesToBlock;
  ...

  // Get a pointer to the stream callout I/O packet
 ioPacket = (FWPS_STREAM_CALLOUT_IO_PACKET0 *)layerData;

  // Get the data fields from inFixedValues
  ...

  // Get any metadata fields from inMetaValues
  ...

  // Get the pointer to the data stream
 dataStream = ioPacket->dataStream;

  // Get any filter context data from filter->context
  ...

  // Get any flow context data from flowContext
  ...

  // Inspect the various data sources to determine
  // the action to be taken on the data
  ...

  // If more stream data is required to make a determination...
 if (...) {

    // Let the filter engine know how many more bytes are needed
 ioPacket->streamAction = FWPS_STREAM_ACTION_NEED_MORE_DATA;
 ioPacket->countBytesRequired = bytesRequired;
 ioPacket->countBytesEnforced = 0;

    // Set the action to continue to the next filter
 classifyOut->actionType = FWP_ACTION_CONTINUE;

 return;
  }
  ...

  // If some or all of the data should be permitted...
 if (...) {

    // No stream-specific action is required
 ioPacket->streamAction = FWPS_STREAM_ACTION_NONE;

    // Let the filter engine know how many of the leading bytes
    // in the stream should be permitted
 ioPacket->countBytesRequired = 0;
 ioPacket->countBytesEnforced = bytesToPermit;

    // Set the action to permit the data
 classifyOut->actionType = FWP_ACTION_PERMIT;

 return;
  }

  ...

  // If some or all of the data should be blocked...
 if (...) {

    // No stream-specific action is required
 ioPacket->streamAction = FWPS_STREAM_ACTION_NONE;

    // Let the filter engine know how many of the leading bytes
    // in the stream should be blocked
 ioPacket->countBytesRequired = 0;
 ioPacket->countBytesEnforced = bytesToBlock;

    // Set the action to block the data
 classifyOut->actionType = FWP_ACTION_BLOCK;

 return;
  }

  ...

  // If the decision to permit or block should be passed
  // to the next filter in the filter engine...
 if (...) {

    // No stream-specific action is required
 ioPacket->streamAction = FWPS_STREAM_ACTION_NONE;

    // No bytes are affected by this callout
 ioPacket->countBytesRequired = 0;
 ioPacket->countBytesEnforced = 0;

 return;
  }

  ...
}

filter-action.type >中的值會決定圖說文字的 classifyFn圖說文字函式應該在classifyOut參數所指向結構的actionType成員中傳回哪些動作。 如需這些動作的詳細資訊,請參閱 FWPS_ACTION0 結構。

如需封包和資料流程資料檢查的詳細資訊,請參閱 檢查封包和串流資料