共用方式為


ID3D12GraphicsCommandList::ClearDepthStencilView 方法 (d3d12.h)

清除深度樣板資源。

語法

void ClearDepthStencilView(
  [in] D3D12_CPU_DESCRIPTOR_HANDLE DepthStencilView,
  [in] D3D12_CLEAR_FLAGS           ClearFlags,
  [in] FLOAT                       Depth,
  [in] UINT8                       Stencil,
  [in] UINT                        NumRects,
  [in] const D3D12_RECT            *pRects
);

參數

[in] DepthStencilView

類型: D3D12_CPU_DESCRIPTOR_HANDLE

描述 CPU 描述項句柄,表示要清除深度樣板的堆積開頭。

[in] ClearFlags

類型: D3D12_CLEAR_FLAGS

使用位 OR 運算結合 D3D12_CLEAR_FLAGS 值的組合。 產生的值會識別要清除 (深度緩衝區、樣板緩衝區或兩者) 的數據類型。

[in] Depth

類型: FLOAT

要清除深度緩衝區的值。 此值會限制在 0 到 1 之間。

[in] Stencil

類型: UINT8

要清除樣板緩衝區的值。

[in] NumRects

類型: UINT

pRects 參數指定之陣列中的矩形數目。

[in] pRects

類型: const D3D12_RECT*

要清除的資源檢視中矩形的 D3D12_RECT 結構陣列。 如果 NULL,ClearDepthStencilView 會清除整個資源檢視。

傳回值

備註

只有直接和配套命令清單支援這項作業。

ClearDepthStencilView 可用來初始化相同堆積記憶體別名的資源。 如需詳細資訊,請參閱 CreatePlacedResource

運行時間驗證

針對浮點輸入,運行時間會將反正規化值設定為 0 (,同時保留 NAN) 。

驗證失敗會導致呼叫 Close 傳回 E_INVALIDARG

偵錯層

如果輸入色彩反正規化,偵錯層就會發出錯誤。

如果檢視所參考的子資源不是處於適當的狀態,偵錯層就會發出錯誤。 針對 ClearDepthStencilView,狀態必須處於狀態 D3D12_RESOURCE_STATE_DEPTH_WRITE

範例

D3D12Bundles 範例使用 ID3D12GraphicsCommandList::ClearDepthStencilView,如下所示:

// Pipeline objects.
D3D12_VIEWPORT m_viewport;
ComPtr<IDXGISwapChain3> m_swapChain;
ComPtr<ID3D12Device> m_device;
ComPtr<ID3D12Resource> m_renderTargets[FrameCount];
ComPtr<ID3D12Resource> m_depthStencil;
ComPtr<ID3D12CommandAllocator> m_commandAllocator;
ComPtr<ID3D12GraphicsCommandList> m_commandList;
ComPtr<ID3D12CommandQueue> m_commandQueue;
ComPtr<ID3D12RootSignature >m_rootSignature;
ComPtr<ID3D12DescriptorHeap> m_rtvHeap;
ComPtr<ID3D12DescriptorHeap> m_cbvSrvHeap;
ComPtr<ID3D12DescriptorHeap> m_dsvHeap;
ComPtr<ID3D12DescriptorHeap> m_samplerHeap;
ComPtr<ID3D12PipelineState> m_pipelineState1;
ComPtr<ID3D12PipelineState> m_pipelineState2;
D3D12_RECT m_scissorRect;
void D3D12Bundles::PopulateCommandList(FrameResource* pFrameResource)
{
    // Command list allocators can only be reset when the associated
    // command lists have finished execution on the GPU; apps should use
    // fences to determine GPU execution progress.
    ThrowIfFailed(m_pCurrentFrameResource->m_commandAllocator->Reset());

    // However, when ExecuteCommandList() is called on a particular command
    // list, that command list can then be reset at any time and must be before
    // re-recording.
    ThrowIfFailed(m_commandList->Reset(m_pCurrentFrameResource->m_commandAllocator.Get(), m_pipelineState1.Get()));

    // Set necessary state.
    m_commandList->SetGraphicsRootSignature(m_rootSignature.Get());

    ID3D12DescriptorHeap* ppHeaps[] = { m_cbvSrvHeap.Get(), m_samplerHeap.Get() };
    m_commandList->SetDescriptorHeaps(_countof(ppHeaps), ppHeaps);

    m_commandList->RSSetViewports(1, &m_viewport);
    m_commandList->RSSetScissorRects(1, &m_scissorRect);

    // Indicate that the back buffer will be used as a render target.
    m_commandList->ResourceBarrier(1, &CD3DX12_RESOURCE_BARRIER::Transition(m_renderTargets[m_frameIndex].Get(), D3D12_RESOURCE_STATE_PRESENT, D3D12_RESOURCE_STATE_RENDER_TARGET));

    CD3DX12_CPU_DESCRIPTOR_HANDLE rtvHandle(m_rtvHeap->GetCPUDescriptorHandleForHeapStart(), m_frameIndex, m_rtvDescriptorSize);
    CD3DX12_CPU_DESCRIPTOR_HANDLE dsvHandle(m_dsvHeap->GetCPUDescriptorHandleForHeapStart());
    m_commandList->OMSetRenderTargets(1, &rtvHandle, FALSE, &dsvHandle);

    // Record commands.
    const float clearColor[] = { 0.0f, 0.2f, 0.4f, 1.0f };
    m_commandList->ClearRenderTargetView(rtvHandle, clearColor, 0, nullptr);
    m_commandList->ClearDepthStencilView(m_dsvHeap->GetCPUDescriptorHandleForHeapStart(), D3D12_CLEAR_FLAG_DEPTH, 1.0f, 0, 0, nullptr);

    if (UseBundles)
    {
        // Execute the prebuilt bundle.
        m_commandList->ExecuteBundle(pFrameResource->m_bundle.Get());
    }
    else
    {
        // Populate a new command list.
        pFrameResource->PopulateCommandList(m_commandList.Get(), m_pipelineState1.Get(), m_pipelineState2.Get(), m_currentFrameResourceIndex, m_numIndices, &m_indexBufferView,
            &m_vertexBufferView, m_cbvSrvHeap.Get(), m_cbvSrvDescriptorSize, m_samplerHeap.Get(), m_rootSignature.Get());
    }

    // Indicate that the back buffer will now be used to present.
    m_commandList->ResourceBarrier(1, &CD3DX12_RESOURCE_BARRIER::Transition(m_renderTargets[m_frameIndex].Get(), D3D12_RESOURCE_STATE_RENDER_TARGET, D3D12_RESOURCE_STATE_PRESENT));

    ThrowIfFailed(m_commandList->Close());
}

D3D12Multithreading 範例使用 ID3D12GraphicsCommandList::ClearDepthStencilView,如下所示:

void FrameResource::Init()
{
    // Reset the command allocators and lists for the main thread.
    for (int i = 0; i < CommandListCount; i++)
    {
        ThrowIfFailed(m_commandAllocators[i]->Reset());
        ThrowIfFailed(m_commandLists[i]->Reset(m_commandAllocators[i].Get(), m_pipelineState.Get()));
    }

    // Clear the depth stencil buffer in preparation for rendering the shadow map.
    m_commandLists[CommandListPre]->ClearDepthStencilView(m_shadowDepthView, D3D12_CLEAR_FLAG_DEPTH, 1.0f, 0, 0, nullptr);

    // Reset the worker command allocators and lists.
    for (int i = 0; i < NumContexts; i++)
    {
        ThrowIfFailed(m_shadowCommandAllocators[i]->Reset());
        ThrowIfFailed(m_shadowCommandLists[i]->Reset(m_shadowCommandAllocators[i].Get(), m_pipelineStateShadowMap.Get()));

        ThrowIfFailed(m_sceneCommandAllocators[i]->Reset());
        ThrowIfFailed(m_sceneCommandLists[i]->Reset(m_sceneCommandAllocators[i].Get(), m_pipelineState.Get()));
    }
}
// Assemble the CommandListPre command list.
void D3D12Multithreading::BeginFrame()
{
    m_pCurrentFrameResource->Init();

    // Indicate that the back buffer will be used as a render target.
    m_pCurrentFrameResource->m_commandLists[CommandListPre]->ResourceBarrier(1, &CD3DX12_RESOURCE_BARRIER::Transition(m_renderTargets[m_frameIndex].Get(), D3D12_RESOURCE_STATE_PRESENT, D3D12_RESOURCE_STATE_RENDER_TARGET));

    // Clear the render target and depth stencil.
    const float clearColor[] = { 0.0f, 0.0f, 0.0f, 1.0f };
    CD3DX12_CPU_DESCRIPTOR_HANDLE rtvHandle(m_rtvHeap->GetCPUDescriptorHandleForHeapStart(), m_frameIndex, m_rtvDescriptorSize);
    m_pCurrentFrameResource->m_commandLists[CommandListPre]->ClearRenderTargetView(rtvHandle, clearColor, 0, nullptr);
    m_pCurrentFrameResource->m_commandLists[CommandListPre]->ClearDepthStencilView(m_dsvHeap->GetCPUDescriptorHandleForHeapStart(), D3D12_CLEAR_FLAG_DEPTH, 1.0f, 0, 0, nullptr);

    ThrowIfFailed(m_pCurrentFrameResource->m_commandLists[CommandListPre]->Close());
}

// Assemble the CommandListMid command list.
void D3D12Multithreading::MidFrame()
{
    // Transition our shadow map from the shadow pass to readable in the scene pass.
    m_pCurrentFrameResource->SwapBarriers();

    ThrowIfFailed(m_pCurrentFrameResource->m_commandLists[CommandListMid]->Close());
}

請參閱 Direct3D 12 參考中的範例程序代碼

規格需求

需求
目標平台 Windows
標頭 d3d12.h
程式庫 D3d12.lib
Dll D3d12.dll

另請參閱

ID3D12GraphicsCommandList