使用其方式為[使用] [查詢] 結構

對於不超過兩個通道且具有 8 位或 16 位樣本的 PCM 音訊資料，請使用 [][要求] 結構來指定資料格式。

下列範例示範如何設定 11.025 KBhertz (kHz) 8 位 mono 和 44.1 kHz 16 位身歷聲的 顯示之的顯示單位X 結構。 設定 允許使用方式時，此範例會呼叫 IsFormatSupported 函式，以確認 PCM 電壓輸出裝置支援格式。 IsFormatSupported 的原始程式碼會顯示在 判斷非標準格式支援的範例中。

UINT wReturn; 
WAVEFORMATEX pcmWaveFormat; 
 
// Set up WAVEFORMATEX for 11 kHz 8-bit mono. 
 
pcmWaveFormat.wFormatTag = WAVE_FORMAT_PCM; 
pcmWaveFormat.nChannels = 1; 
pcmWaveFormat.nSamplesPerSec = 11025L; 
pcmWaveFormat.nAvgBytesPerSec = 11025L; 
pcmWaveFormat.nBlockAlign = 1; 
pcmWaveFormat.wBitsPerSample = 8; 
pcmWaveFormat.cbSize = 0;
 
// See if format is supported by any device in system. 
 
wReturn = IsFormatSupported(&pcmWaveFormat, WAVE_MAPPER); 
 
// Report results. 
 
if (wReturn == 0) 
     MessageBox(hMainWnd, "11 kHz 8-bit mono is supported.", 
       "", MB_ICONINFORMATION); 
else if (wReturn == WAVERR_BADFORMAT) 
     MessageBox(hMainWnd, "11 kHz 8-bit mono NOT supported.", 
       "", MB_ICONINFORMATION); 
else 
     MessageBox(hMainWnd, "Error opening waveform device.", 
       "Error", MB_ICONEXCLAMATION); 
 
// Set up WAVEFORMATEX for 44.1 kHz 16-bit stereo. 
 
pcmWaveFormat.wFormatTag = WAVE_FORMAT_PCM; 
pcmWaveFormat.nChannels = 2; 
pcmWaveFormat.nSamplesPerSec = 44100L; 
pcmWaveFormat.nAvgBytesPerSec = 176400L; 
pcmWaveFormat.nBlockAlign = 4; 
pcmWaveFormat.wBitsPerSample = 16; 
pcmWaveFormat.cbSize = 0;
 
// See if format is supported by any device in the system. 
 
wReturn = IsFormatSupported(&pcmWaveFormat, WAVE_MAPPER); 
 
// Report results. 
 
if (wReturn == 0) 
    MessageBox(hMainWnd, "44.1 kHz 16-bit stereo is supported.", 
      "", MB_ICONINFORMATION); 
else if (wReturn == WAVERR_BADFORMAT) 
    MessageBox(hMainWnd, "44.1 kHz 16-bit stereo NOT supported.", 
      "", MB_ICONINFORMATION); 
else 
    MessageBox(hMainWnd, "Error opening waveform device.", 
      "Error", MB_ICONEXCLAMATION);