Automation guidelines for Virtual WAN partners

Članak
11/30/2022

This article helps you understand how to set up the automation environment to connect and configure a branch device (a customer on-premises VPN device or SDWAN CPE) for Azure Virtual WAN. If you are a provider that provides branch devices that can accommodate VPN connectivity over IPsec/IKEv2 or IPsec/IKEv1, this article is for you.

A branch device (a customer on-premises VPN device or SDWAN CPE) typically uses a controller/device dashboard to be provisioned. SD-WAN solution administrators can often use a management console to pre-provision a device before it gets plugged into the network. This VPN capable device gets its control plane logic from a controller. The VPN Device or SD-WAN controller can use Azure APIs to automate connectivity to Azure Virtual WAN. This type of connection requires the on-premises device to have an externally facing public IP address assigned to it.

Before you begin automating

Verify that your device supports IPsec IKEv1/IKEv2. See default policies.
View the REST APIs that you use to automate connectivity to Azure Virtual WAN.
Test out the portal experience of Azure Virtual WAN.
Then, decide which part of the connectivity steps you would like to automate. At a minimum, we recommend automating:
- Access Control
- Upload of branch device information into Azure Virtual WAN
- Downloading Azure configuration and setting up connectivity from branch device into Azure Virtual WAN

Additional information

REST API to automate Virtual Hub creation
REST API to automate Azure VPN gateway for Virtual WAN
REST API to connect a VPNSite to an Azure VPN Hub
Default IPsec policies

Customer experience

Understand the expected customer experience in conjunction with Azure Virtual WAN.

Typically, a virtual WAN user will start the process by creating a Virtual WAN resource.
The user will set up a service principal-based resource group access for the on-premises system (your branch controller or VPN device provisioning software) to write branch info into Azure Virtual WAN.
The user may decide at this time to log into your UI and set up the service principal credentials. Once that is complete, your controller should be able to upload branch information with the automation you will provide. The manual equivalent of this on the Azure side is 'Create Site'.
Once the Site (branch device) information is available in Azure, the user will connect the site to a hub. A virtual hub is a Microsoft-managed virtual network. The hub contains various service endpoints to enable connectivity from your on-premises network (vpnsite). The hub is the core of your network in a region and the vpn endpoint (vpngateway) inside it is created during this process. You can create more than one hub in the same region for the same Azure Virtual WAN. The VPN gateway is a scalable gateway which sizes appropriately based on bandwidth and connection needs. You may choose to automate virtual hub and vpngateway creation from your branch device controller dashboard.
Once the virtual Hub is associated to the site, a configuration file is generated for the user to manually download. This is where your automation comes in and makes the user experience seamless. Instead of the user having to manually download and configure the branch device, you can set the automation and provide minimal click-through experience on your UI, thereby alleviating typical connectivity issues such as shared key mismatch, IPSec parameter mismatch, configuration file readability etc.
At the end of this step in your solution, the user will have a seamless site-to-site connection between the branch device and virtual hub. You can also set up additional connections across other hubs. Each connection is an active-active tunnel. Your customer may choose to use a different ISP for each of the links for the tunnel.
Consider providing troubleshooting and monitoring capabilities in the CPE management interface. Typical scenarios include "Customer not able to access Azure resources due to a CPE issue", "Show IPsec parameters at the CPE side" etc.

Automation details

Access control

Customers must be able to set up appropriate access control for Virtual WAN in the device UI. This is recommended using an Azure Service Principal. Service principal-based access provides the device controller appropriate authentication to upload branch information. For more information, see Create service principal. While this functionality is outside of the Azure Virtual WAN offering, we list below the typical steps taken to set up access in Azure after which the relevant details are inputted into the device management dashboard

Create a Microsoft Entra application for your on-premises device controller.
Get application ID and authentication key
Get tenant ID
Assign application to role "Contributor"

Upload branch device information

You should design the user experience to upload branch (on-premises site) information to Azure. You can use REST APIs for VPNSite to create the site information in Virtual WAN. You can provide all branch SDWAN/VPN devices or select device customizations as appropriate.

Device configuration download and connectivity

This step involves downloading Azure configuration and setting up connectivity from the branch device into Azure Virtual WAN. In this step, a customer that is not using a provider would manually download the Azure configuration and apply it to their on-premises SDWAN/VPN device. As a provider, you should automate this step. View the download REST APIs for additional information. The device controller can call 'GetVpnConfiguration' REST API to download the Azure configuration.

Configuration notes

If Azure VNets are attached to the virtual hub, they will appear as ConnectedSubnets.
VPN connectivity uses route-based configuration and supports both IKEv1, and IKEv2 protocols.

Device configuration file

The device configuration file contains the settings to use when configuring your on-premises VPN device. When you view this file, notice the following information:

vpnSiteConfiguration - This section denotes the device details set up as a site connecting to the virtual WAN. It includes the name and public ip address of the branch device.
vpnSiteConnections - This section provides information about the following:
- Address space of the virtual hub(s) VNet.
  Example:
```
"AddressSpace":"10.1.0.0/24"
```
- Address space of the VNets that are connected to the hub.
  Example:
```
"ConnectedSubnets":["10.2.0.0/16","10.3.0.0/16"]
```
- IP addresses of the virtual hub vpngateway. Because the vpngateway has each connection comprising of 2 tunnels in active-active configuration, you will see both IP addresses listed in this file. In this example, you see "Instance0" and "Instance1" for each site.
  Example:
```
"Instance0":"104.45.18.186"
"Instance1":"104.45.13.195"
```
- Vpngateway connection configuration details such as BGP, pre-shared key etc. The PSK is the pre-shared key that is automatically generated for you. You can always edit the connection in the Overview page for a custom PSK.

Example device configuration file

{ 
    "configurationVersion":{ 
       "LastUpdatedTime":"2018-07-03T18:29:49.8405161Z",
       "Version":"r403583d-9c82-4cb8-8570-1cbbcd9983b5"
    },
    "vpnSiteConfiguration":{ 
       "Name":"testsite1",
       "IPAddress":"73.239.3.208"
    },
    "vpnSiteConnections":[ 
       { 
          "hubConfiguration":{ 
             "AddressSpace":"10.1.0.0/24",
             "Region":"West Europe",
             "ConnectedSubnets":[ 
                "10.2.0.0/16",
                "10.3.0.0/16"
             ]
          },
          "gatewayConfiguration":{ 
             "IpAddresses":{ 
                "Instance0":"104.45.18.186",
                "Instance1":"104.45.13.195"
             }
          },
          "connectionConfiguration":{ 
             "IsBgpEnabled":false,
             "PSK":"bkOWe5dPPqkx0DfFE3tyuP7y3oYqAEbI",
             "IPsecParameters":{ 
                "SADataSizeInKilobytes":102400000,
                "SALifeTimeInSeconds":3600
             }
          }
       }
    ]
 },
 { 
    "configurationVersion":{ 
       "LastUpdatedTime":"2018-07-03T18:29:49.8405161Z",
       "Version":"1f33f891-e1ab-42b8-8d8c-c024d337bcac"
    },
    "vpnSiteConfiguration":{ 
       "Name":" testsite2",
       "IPAddress":"66.193.205.122"
    },
    "vpnSiteConnections":[ 
       { 
          "hubConfiguration":{ 
             "AddressSpace":"10.1.0.0/24",
             "Region":"West Europe"
          },
          "gatewayConfiguration":{ 
             "IpAddresses":{ 
                "Instance0":"104.45.18.187",
                "Instance1":"104.45.13.195"
             }
          },
          "connectionConfiguration":{ 
             "IsBgpEnabled":false,
             "PSK":"XzODPyAYQqFs4ai9WzrJour0qLzeg7Qg",
             "IPsecParameters":{ 
                "SADataSizeInKilobytes":102400000,
                "SALifeTimeInSeconds":3600
             }
          }
       }
    ]
 },
 { 
    "configurationVersion":{ 
       "LastUpdatedTime":"2018-07-03T18:29:49.8405161Z",
       "Version":"cd1e4a23-96bd-43a9-93b5-b51c2a945c7"
    },
    "vpnSiteConfiguration":{ 
       "Name":" testsite3",
       "IPAddress":"182.71.123.228"
    },
    "vpnSiteConnections":[ 
       { 
          "hubConfiguration":{ 
             "AddressSpace":"10.1.0.0/24",
             "Region":"West Europe"
          },
          "gatewayConfiguration":{ 
             "IpAddresses":{ 
                "Instance0":"104.45.18.187",
                "Instance1":"104.45.13.195"
             }
          },
          "connectionConfiguration":{ 
             "IsBgpEnabled":false,
             "PSK":"YLkSdSYd4wjjEThR3aIxaXaqNdxUwSo9",
             "IPsecParameters":{ 
                "SADataSizeInKilobytes":102400000,
                "SALifeTimeInSeconds":3600
             }
          }
       }
    ]
 }

Connectivity details

Your on-premises SDWAN/VPN device or SD-WAN configuration must match or contain the following algorithms and parameters, which you specify in the Azure IPsec/IKE policy.

IKE encryption algorithm
IKE integrity algorithm
DH Group
IPsec encryption algorithm
IPsec integrity algorithm
PFS Group

Default policies for IPsec connectivity

Note

When working with Default policies, Azure can act as both initiator and responder during an IPsec tunnel setup. While Virtual WAN VPN supports many algorithm combinations, our recommendation is GCMAES256 for both IPSEC Encryption and Integrity for optimal performance. AES256 and SHA256 are considered less performant and therefore performance degradation such as latency and packet drops can be expected for similar algorithm types. For more information about Virtual WAN, see the Azure Virtual WAN FAQ.

Initiator

The following sections list the supported policy combinations when Azure is the initiator for the tunnel.

Phase-1

AES_256, SHA1, DH_GROUP_2
AES_256, SHA_256, DH_GROUP_2
AES_128, SHA1, DH_GROUP_2
AES_128, SHA_256, DH_GROUP_2

Phase-2

GCM_AES_256, GCM_AES_256, PFS_NONE
AES_256, SHA_1, PFS_NONE
AES_256, SHA_256, PFS_NONE
AES_128, SHA_1, PFS_NONE

Responder

The following sections list the supported policy combinations when Azure is the responder for the tunnel.

Phase-1

AES_256, SHA1, DH_GROUP_2
AES_256, SHA_256, DH_GROUP_2
AES_128, SHA1, DH_GROUP_2
AES_128, SHA_256, DH_GROUP_2

Phase-2

GCM_AES_256, GCM_AES_256, PFS_NONE
AES_256, SHA_1, PFS_NONE
AES_256, SHA_256, PFS_NONE
AES_128, SHA_1, PFS_NONE
AES_256, SHA_1, PFS_1
AES_256, SHA_1, PFS_2
AES_256, SHA_1, PFS_14
AES_128, SHA_1, PFS_1
AES_128, SHA_1, PFS_2
AES_128, SHA_1, PFS_14
AES_256, SHA_256, PFS_1
AES_256, SHA_256, PFS_2
AES_256, SHA_256, PFS_14
AES_256, SHA_1, PFS_24
AES_256, SHA_256, PFS_24
AES_128, SHA_256, PFS_NONE
AES_128, SHA_256, PFS_1
AES_128, SHA_256, PFS_2
AES_128, SHA_256, PFS_14

SA Lifetime Values

These life time values apply for both initiator and responder

SA Lifetime in seconds: 3600 seconds
SA Lifetime in Bytes: 102,400,000 KB

Custom policies for IPsec connectivity

When working with custom IPsec policies, keep in mind the following requirements:

IKE - For IKE, you can select any parameter from IKE Encryption, plus any parameter from IKE Integrity, plus any parameter from DH Group.
IPsec - For IPsec, you can select any parameter from IPsec Encryption, plus any parameter from IPsec Integrity, plus PFS. If any of the parameters for IPsec Encryption or IPsec Integrity is GCM, then the parameters for both settings must be GCM.

The default custom policy includes SHA1, DHGroup2, and 3DES for backward compatibility. These are weaker algorithms that aren't supported when creating a custom policy. We recommend only using the following algorithms:

Available settings and parameters

Setting	Parameters
IKE Encryption	GCMAES256, GCMAES128, AES256, AES128
IKE Integrity	SHA384, SHA256
DH Group	ECP384, ECP256, DHGroup24, DHGroup14
IPsec Encryption	GCMAES256, GCMAES128, AES256, AES128, None
IPsec Integrity	GCMAES256, GCMAES128, SHA256
PFS Group	ECP384, ECP256, PFS24, PFS14, None
SA Lifetime	integer; min. 300/ default 3600 seconds

Next steps

For more information about Virtual WAN, see About Azure Virtual WAN and the Azure Virtual WAN FAQ.

For any additional information, please send an email to azurevirtualwan@microsoft.com. Include your company name in “[ ]” in the subject line.

Dijelite putem