Notificaciones de recolección de elementos no utilizados
Hay situaciones en que una colección de elementos no utilizados completa (es decir, una colección de generación 2) de Common Language Runtime puede afectar negativamente al rendimiento. Esto puede ser un problema especialmente con servidores que procesan grandes volúmenes de solicitudes; en este caso, una recolección grande de elementos no utilizados puede causar un tiempo de espera en la solicitud. Para evitar una recolección grande durante un período crítico, puede recibir una notificación de la proximidad de una recolección grande de elementos no utilizados y adoptar las medidas pertinentes para redirigir la carga de trabajo a otra instancia del servidor. También puede incluir una recolección por su cuenta, siempre que la instancia de servidor actual no necesite procesar solicitudes.
El método RegisterForFullGCNotification registra una notificación que se genera si el tiempo de ejecución detecta que una recolección de elementos no utilizados completa está próxima. Esta notificación consta de dos partes: cuando se está aproximando la recolección de elementos no utilizados completa y cuando finaliza la recolección de elementos no utilizados completa.
Advertencia
Cuando el elemento de configuración< gcConcurrent> está habilitado, WaitForFullGCComplete puede devolver NotApplicable GCNotificationStatus si el GC completo se realizó como GC en segundo plano.
Para determinar cuándo se ha generado una notificación, use los métodos WaitForFullGCApproach y WaitForFullGCComplete. Por lo general, utilice estos métodos en un bucle while para obtener continuamente una enumeración GCNotificationStatus que muestra el estado de la notificación. Si el valor es Succeeded, puede hacer lo siguiente:
En respuesta a una notificación obtenida con el método WaitForFullGCApproach, puede redirigir la carga de trabajo y posiblemente inducir una recolección.
En respuesta a una notificación obtenida con el método WaitForFullGCComplete, puede habilitar la instancia de servidor actual para volver a procesar las solicitudes. También puede recopilar información. Por ejemplo, puede usar el método CollectionCount para registrar el número de recolecciones.
Los métodos WaitForFullGCApproach y WaitForFullGCComplete están diseñados para que funcionen de forma conjunta. Utilizar un método sin el otro puede producir resultados indeterminados.
Recolección de elementos no utilizados completa
El tiempo de ejecución produce una recolección de elementos no utilizados completa cuando se cumple alguna de las situaciones siguientes:
Se ha promocionado suficiente memoria en la generación 2 para generar la siguiente recolección de la generación 2.
Se ha promocionado suficiente memoria en el montón de objetos grandes para generar la siguiente recolección de la generación 2.
Una recolección de la generación 1 se escala a una recolección de la generación 2 debido a dos factores.
Los umbrales especificados en el método RegisterForFullGCNotification se aplican a los dos primeros escenarios. Sin embargo, en el primer escenario no siempre recibirá la notificación en el tiempo proporcional a los valores de umbral especificados por dos motivos:
El tiempo de ejecución no comprueba cada asignación de objetos pequeños (por motivos de rendimiento).
Solo las recolecciones de la generación 1 promueven la memoria a la generación 2.
El tercer escenario también contribuye a la incertidumbre de cuándo recibirá la notificación. Aunque esto no es una garantía, demuestra ser útil para mitigar los efectos de una recolección de elementos no utilizados completa inoportuna redirigiendo las solicitudes durante este tiempo o induciendo la recolección por su cuenta cuando sea más apropiado.
Parámetros del umbral de notificación
El método RegisterForFullGCNotification tiene dos parámetros para especificar los valores de umbral de los objetos de generación 2 y del montón de objetos grandes. Cuando se alcanza dichos valores, debe generarse una notificación de recolección de elementos no utilizados. En la siguiente tabla se describen estos parámetros.
| Parámetro | Descripción |
|---|---|
maxGenerationThreshold |
Número comprendido entre 1 y 99 que especifica cuándo debe emitirse la notificación basándose en los objetos promocionados en la generación 2. |
largeObjectHeapThreshold |
Un número comprendido entre 1 y 99 que especifica cuándo debe emitirse la notificación basándose en los objetos asignados en el montón de objetos grandes. |
Si especifica un valor que es demasiado alto, hay una alta probabilidad de recibir una notificación, pero podría producirse un tiempo de espera demasiado largo antes de que el tiempo de ejecución genere una recolección. Si induce una recolección, puede reclamar más objetos de los que reclamarían si el tiempo de ejecución genera la recolección.
Si especifica un valor que es demasiado bajo, el tiempo de ejecución puede provocar la recolección antes de que haya tenido tiempo suficiente para recibir la notificación.
Ejemplo
Descripción
En el ejemplo siguiente, un grupo de solicitudes web entrantes del servicio de servidores. Para simular la carga de trabajo de procesamiento de solicitudes, se agregan matrices de bytes a una colección List<T>. Cada servidor registra una notificación de la recolección de elementos no utilizados y luego inicia un subproceso en el método del usuario WaitForFullGCProc para supervisar continuamente la enumeración GCNotificationStatus devuelta por los métodos WaitForFullGCApproach y WaitForFullGCComplete.
Los métodos WaitForFullGCApproach y WaitForFullGCComplete llaman a sus respectivos métodos de usuario de control de eventos cuando se emite una notificación:
OnFullGCApproachNotifyEste método llama al método de usuario
RedirectRequests, que indica al servidor de puesta en cola de solicitudes que suspenda el envío de solicitudes al servidor. Esto se simula con la definición de la variable de nivel de clasebAllocateenfalse, para que no se asignen más objetos.Después, se llama al método de usuario
FinishExistingRequestspara finalizar el procesamiento de las solicitudes de servidor pendientes. Esto se simula mediante la desactivación de la recolección List<T>.Por último, se indujo una recolección de elementos no utilizados porque la carga de trabajo es ligera.
OnFullGCCompleteNotifyEste método llama al método de usuario
AcceptRequestspara reanudar la aceptación de solicitudes porque el servidor ya no es susceptible a una recolección de elementos no utilizados completa. Esta acción se simula estableciendo la variablebAllocateentrue, para que se reanude la adición de los objetos a la recolección List<T>.
El código siguiente contiene el método Main del ejemplo.
using namespace System;
using namespace System::Collections::Generic;
using namespace System::Threading;
namespace GCNotify
{
ref class Program
{
private:
// Variable for continual checking in the
// While loop in the WaitForFullGCProc method.
static bool checkForNotify = false;
// Variable for suspending work
// (such servicing allocated server requests)
// after a notification is received and then
// resuming allocation after inducing a garbage collection.
static bool bAllocate = false;
// Variable for ending the example.
static bool finalExit = false;
// Collection for objects that
// simulate the server request workload.
static List<array<Byte>^>^ load = gcnew List<array<Byte>^>();
public:
static void Main()
{
try
{
// Register for a notification.
GC::RegisterForFullGCNotification(10, 10);
Console::WriteLine("Registered for GC notification.");
checkForNotify = true;
bAllocate = true;
// Start a thread using WaitForFullGCProc.
Thread^ thWaitForFullGC = gcnew Thread(gcnew ThreadStart(&WaitForFullGCProc));
thWaitForFullGC->Start();
// While the thread is checking for notifications in
// WaitForFullGCProc, create objects to simulate a server workload.
try
{
int lastCollCount = 0;
int newCollCount = 0;
while (true)
{
if (bAllocate)
{
load->Add(gcnew array<Byte>(1000));
newCollCount = GC::CollectionCount(2);
if (newCollCount != lastCollCount)
{
// Show collection count when it increases:
Console::WriteLine("Gen 2 collection count: {0}", GC::CollectionCount(2).ToString());
lastCollCount = newCollCount;
}
// For ending the example (arbitrary).
if (newCollCount == 500)
{
finalExit = true;
checkForNotify = false;
break;
}
}
}
}
catch (OutOfMemoryException^)
{
Console::WriteLine("Out of memory.");
}
finalExit = true;
checkForNotify = false;
GC::CancelFullGCNotification();
}
catch (InvalidOperationException^ invalidOp)
{
Console::WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
+ invalidOp->Message);
}
}
public:
static void OnFullGCApproachNotify()
{
Console::WriteLine("Redirecting requests.");
// Method that tells the request queuing
// server to not direct requests to this server.
RedirectRequests();
// Method that provides time to
// finish processing pending requests.
FinishExistingRequests();
// This is a good time to induce a GC collection
// because the runtime will induce a full GC soon.
// To be very careful, you can check precede with a
// check of the GC.GCCollectionCount to make sure
// a full GC did not already occur since last notified.
GC::Collect();
Console::WriteLine("Induced a collection.");
}
public:
static void OnFullGCCompleteEndNotify()
{
// Method that informs the request queuing server
// that this server is ready to accept requests again.
AcceptRequests();
Console::WriteLine("Accepting requests again.");
}
public:
static void WaitForFullGCProc()
{
while (true)
{
// CheckForNotify is set to true and false in Main.
while (checkForNotify)
{
// Check for a notification of an approaching collection.
GCNotificationStatus s = GC::WaitForFullGCApproach();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCApproachNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// This can occur if a timeout period
// is specified for WaitForFullGCApproach(Timeout)
// or WaitForFullGCComplete(Timeout)
// and the time out period has elapsed.
Console::WriteLine("GC Notification not applicable.");
break;
}
// Check for a notification of a completed collection.
s = GC::WaitForFullGCComplete();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCCompleteEndNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// Could be a time out.
Console::WriteLine("GC Notification not applicable.");
break;
}
}
Thread::Sleep(500);
// FinalExit is set to true right before
// the main thread cancelled notification.
if (finalExit)
{
break;
}
}
}
private:
static void RedirectRequests()
{
// Code that sends requests
// to other servers.
// Suspend work.
bAllocate = false;
}
static void FinishExistingRequests()
{
// Code that waits a period of time
// for pending requests to finish.
// Clear the simulated workload.
load->Clear();
}
static void AcceptRequests()
{
// Code that resumes processing
// requests on this server.
// Resume work.
bAllocate = true;
}
};
}
int main()
{
GCNotify::Program::Main();
}
public static void Main(string[] args)
{
try
{
// Register for a notification.
GC.RegisterForFullGCNotification(10, 10);
Console.WriteLine("Registered for GC notification.");
checkForNotify = true;
bAllocate = true;
// Start a thread using WaitForFullGCProc.
Thread thWaitForFullGC = new Thread(new ThreadStart(WaitForFullGCProc));
thWaitForFullGC.Start();
// While the thread is checking for notifications in
// WaitForFullGCProc, create objects to simulate a server workload.
try
{
int lastCollCount = 0;
int newCollCount = 0;
while (true)
{
if (bAllocate)
{
load.Add(new byte[1000]);
newCollCount = GC.CollectionCount(2);
if (newCollCount != lastCollCount)
{
// Show collection count when it increases:
Console.WriteLine("Gen 2 collection count: {0}", GC.CollectionCount(2).ToString());
lastCollCount = newCollCount;
}
// For ending the example (arbitrary).
if (newCollCount == 500)
{
finalExit = true;
checkForNotify = false;
break;
}
}
}
}
catch (OutOfMemoryException)
{
Console.WriteLine("Out of memory.");
}
finalExit = true;
checkForNotify = false;
GC.CancelFullGCNotification();
}
catch (InvalidOperationException invalidOp)
{
Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
+ invalidOp.Message);
}
}
Imports System.Collections.Generic
Imports System.Threading
Class Program
' Variables for continual checking in the
' While loop in the WaitForFullGcProc method.
Private Shared checkForNotify As Boolean = False
' Variable for suspending work
' (such as servicing allocated server requests)
' after a notification is received and then
' resuming allocation after inducing a garbage collection.
Private Shared bAllocate As Boolean = False
' Variable for ending the example.
Private Shared finalExit As Boolean = False
' Collection for objects that
' simulate the server request workload.
Private Shared load As New List(Of Byte())
Public Shared Sub Main(ByVal args() As String)
Try
' Register for a notification.
GC.RegisterForFullGCNotification(10, 10)
Console.WriteLine("Registered for GC notification.")
bAllocate = True
checkForNotify = True
' Start a thread using WaitForFullGCProc.
Dim thWaitForFullGC As Thread = _
New Thread(New ThreadStart(AddressOf WaitForFullGCProc))
thWaitForFullGC.Start()
' While the thread is checking for notifications in
' WaitForFullGCProc, create objects to simulate a server workload.
Try
Dim lastCollCount As Integer = 0
Dim newCollCount As Integer = 0
While (True)
If bAllocate = True Then
load.Add(New Byte(1000) {})
newCollCount = GC.CollectionCount(2)
If (newCollCount <> lastCollCount) Then
' Show collection count when it increases:
Console.WriteLine("Gen 2 collection count: {0}", _
GC.CollectionCount(2).ToString)
lastCollCount = newCollCount
End If
' For ending the example (arbitrary).
If newCollCount = 500 Then
finalExit = True
checkForNotify = False
bAllocate = False
Exit While
End If
End If
End While
Catch outofMem As OutOfMemoryException
Console.WriteLine("Out of memory.")
End Try
finalExit = True
checkForNotify = False
GC.CancelFullGCNotification()
Catch invalidOp As InvalidOperationException
Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled." _
& vbLf & invalidOp.Message)
End Try
End Sub
Public Shared Sub OnFullGCApproachNotify()
Console.WriteLine("Redirecting requests.")
' Method that tells the request queuing
' server to not direct requests to this server.
RedirectRequests()
' Method that provides time to
' finish processing pending requests.
FinishExistingRequests()
' This is a good time to induce a GC collection
' because the runtime will induce a ful GC soon.
' To be very careful, you can check precede with a
' check of the GC.GCCollectionCount to make sure
' a full GC did not already occur since last notified.
GC.Collect()
Console.WriteLine("Induced a collection.")
End Sub
Public Shared Sub OnFullGCCompleteEndNotify()
' Method that informs the request queuing server
' that this server is ready to accept requests again.
AcceptRequests()
Console.WriteLine("Accepting requests again.")
End Sub
Public Shared Sub WaitForFullGCProc()
While True
' CheckForNotify is set to true and false in Main.
While checkForNotify
' Check for a notification of an approaching collection.
Dim s As GCNotificationStatus = GC.WaitForFullGCApproach
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCApproachNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' This can occur if a timeout period
' is specified for WaitForFullGCApproach(Timeout)
' or WaitForFullGCComplete(Timeout)
' and the time out period has elapsed.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
' Check for a notification of a completed collection.
s = GC.WaitForFullGCComplete
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCCompleteEndNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' Could be a time out.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
End While
Thread.Sleep(500)
' FinalExit is set to true right before
' the main thread cancelled notification.
If finalExit Then
Exit While
End If
End While
End Sub
Private Shared Sub RedirectRequests()
' Code that sends requests
' to other servers.
' Suspend work.
bAllocate = False
End Sub
Private Shared Sub FinishExistingRequests()
' Code that waits a period of time
' for pending requests to finish.
' Clear the simulated workload.
load.Clear()
End Sub
Private Shared Sub AcceptRequests()
' Code that resumes processing
' requests on this server.
' Resume work.
bAllocate = True
End Sub
End Class
El siguiente código contiene el método de usuario WaitForFullGCProc, que incluye un bucle while continuo para comprobar las notificaciones de recolección de elementos no utilizados.
public:
static void WaitForFullGCProc()
{
while (true)
{
// CheckForNotify is set to true and false in Main.
while (checkForNotify)
{
// Check for a notification of an approaching collection.
GCNotificationStatus s = GC::WaitForFullGCApproach();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCApproachNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// This can occur if a timeout period
// is specified for WaitForFullGCApproach(Timeout)
// or WaitForFullGCComplete(Timeout)
// and the time out period has elapsed.
Console::WriteLine("GC Notification not applicable.");
break;
}
// Check for a notification of a completed collection.
s = GC::WaitForFullGCComplete();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCCompleteEndNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// Could be a time out.
Console::WriteLine("GC Notification not applicable.");
break;
}
}
Thread::Sleep(500);
// FinalExit is set to true right before
// the main thread cancelled notification.
if (finalExit)
{
break;
}
}
}
public static void WaitForFullGCProc()
{
while (true)
{
// CheckForNotify is set to true and false in Main.
while (checkForNotify)
{
// Check for a notification of an approaching collection.
GCNotificationStatus s = GC.WaitForFullGCApproach();
if (s == GCNotificationStatus.Succeeded)
{
Console.WriteLine("GC Notification raised.");
OnFullGCApproachNotify();
}
else if (s == GCNotificationStatus.Canceled)
{
Console.WriteLine("GC Notification cancelled.");
break;
}
else
{
// This can occur if a timeout period
// is specified for WaitForFullGCApproach(Timeout)
// or WaitForFullGCComplete(Timeout)
// and the time out period has elapsed.
Console.WriteLine("GC Notification not applicable.");
break;
}
// Check for a notification of a completed collection.
GCNotificationStatus status = GC.WaitForFullGCComplete();
if (status == GCNotificationStatus.Succeeded)
{
Console.WriteLine("GC Notification raised.");
OnFullGCCompleteEndNotify();
}
else if (status == GCNotificationStatus.Canceled)
{
Console.WriteLine("GC Notification cancelled.");
break;
}
else
{
// Could be a time out.
Console.WriteLine("GC Notification not applicable.");
break;
}
}
Thread.Sleep(500);
// FinalExit is set to true right before
// the main thread cancelled notification.
if (finalExit)
{
break;
}
}
}
Public Shared Sub WaitForFullGCProc()
While True
' CheckForNotify is set to true and false in Main.
While checkForNotify
' Check for a notification of an approaching collection.
Dim s As GCNotificationStatus = GC.WaitForFullGCApproach
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCApproachNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' This can occur if a timeout period
' is specified for WaitForFullGCApproach(Timeout)
' or WaitForFullGCComplete(Timeout)
' and the time out period has elapsed.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
' Check for a notification of a completed collection.
s = GC.WaitForFullGCComplete
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCCompleteEndNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' Could be a time out.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
End While
Thread.Sleep(500)
' FinalExit is set to true right before
' the main thread cancelled notification.
If finalExit Then
Exit While
End If
End While
End Sub
El código siguiente contiene el método OnFullGCApproachNotify tras realizar la llamada al
Método WaitForFullGCProc.
public:
static void OnFullGCApproachNotify()
{
Console::WriteLine("Redirecting requests.");
// Method that tells the request queuing
// server to not direct requests to this server.
RedirectRequests();
// Method that provides time to
// finish processing pending requests.
FinishExistingRequests();
// This is a good time to induce a GC collection
// because the runtime will induce a full GC soon.
// To be very careful, you can check precede with a
// check of the GC.GCCollectionCount to make sure
// a full GC did not already occur since last notified.
GC::Collect();
Console::WriteLine("Induced a collection.");
}
public static void OnFullGCApproachNotify()
{
Console.WriteLine("Redirecting requests.");
// Method that tells the request queuing
// server to not direct requests to this server.
RedirectRequests();
// Method that provides time to
// finish processing pending requests.
FinishExistingRequests();
// This is a good time to induce a GC collection
// because the runtime will induce a full GC soon.
// To be very careful, you can check precede with a
// check of the GC.GCCollectionCount to make sure
// a full GC did not already occur since last notified.
GC.Collect();
Console.WriteLine("Induced a collection.");
}
Public Shared Sub OnFullGCApproachNotify()
Console.WriteLine("Redirecting requests.")
' Method that tells the request queuing
' server to not direct requests to this server.
RedirectRequests()
' Method that provides time to
' finish processing pending requests.
FinishExistingRequests()
' This is a good time to induce a GC collection
' because the runtime will induce a ful GC soon.
' To be very careful, you can check precede with a
' check of the GC.GCCollectionCount to make sure
' a full GC did not already occur since last notified.
GC.Collect()
Console.WriteLine("Induced a collection.")
End Sub
El código siguiente contiene el método OnFullGCApproachComplete tras realizar la llamada al
Método WaitForFullGCProc.
public:
static void OnFullGCCompleteEndNotify()
{
// Method that informs the request queuing server
// that this server is ready to accept requests again.
AcceptRequests();
Console::WriteLine("Accepting requests again.");
}
public static void OnFullGCCompleteEndNotify()
{
// Method that informs the request queuing server
// that this server is ready to accept requests again.
AcceptRequests();
Console.WriteLine("Accepting requests again.");
}
Public Shared Sub OnFullGCCompleteEndNotify()
' Method that informs the request queuing server
' that this server is ready to accept requests again.
AcceptRequests()
Console.WriteLine("Accepting requests again.")
End Sub
El código siguiente contiene los métodos de usuario tras realizar la llamada a los métodos OnFullGCApproachNotify y OnFullGCCompleteNotify. Los métodos de usuario redirigen las solicitudes, finalizan las solicitudes existentes y reanudan las solicitudes después de que se produzca una recolección de elementos no utilizados completa.
private:
static void RedirectRequests()
{
// Code that sends requests
// to other servers.
// Suspend work.
bAllocate = false;
}
static void FinishExistingRequests()
{
// Code that waits a period of time
// for pending requests to finish.
// Clear the simulated workload.
load->Clear();
}
static void AcceptRequests()
{
// Code that resumes processing
// requests on this server.
// Resume work.
bAllocate = true;
}
private static void RedirectRequests()
{
// Code that sends requests
// to other servers.
// Suspend work.
bAllocate = false;
}
private static void FinishExistingRequests()
{
// Code that waits a period of time
// for pending requests to finish.
// Clear the simulated workload.
load.Clear();
}
private static void AcceptRequests()
{
// Code that resumes processing
// requests on this server.
// Resume work.
bAllocate = true;
}
Private Shared Sub RedirectRequests()
' Code that sends requests
' to other servers.
' Suspend work.
bAllocate = False
End Sub
Private Shared Sub FinishExistingRequests()
' Code that waits a period of time
' for pending requests to finish.
' Clear the simulated workload.
load.Clear()
End Sub
Private Shared Sub AcceptRequests()
' Code that resumes processing
' requests on this server.
' Resume work.
bAllocate = True
End Sub
El ejemplo de código completo es el siguiente:
using namespace System;
using namespace System::Collections::Generic;
using namespace System::Threading;
namespace GCNotify
{
ref class Program
{
private:
// Variable for continual checking in the
// While loop in the WaitForFullGCProc method.
static bool checkForNotify = false;
// Variable for suspending work
// (such servicing allocated server requests)
// after a notification is received and then
// resuming allocation after inducing a garbage collection.
static bool bAllocate = false;
// Variable for ending the example.
static bool finalExit = false;
// Collection for objects that
// simulate the server request workload.
static List<array<Byte>^>^ load = gcnew List<array<Byte>^>();
public:
static void Main()
{
try
{
// Register for a notification.
GC::RegisterForFullGCNotification(10, 10);
Console::WriteLine("Registered for GC notification.");
checkForNotify = true;
bAllocate = true;
// Start a thread using WaitForFullGCProc.
Thread^ thWaitForFullGC = gcnew Thread(gcnew ThreadStart(&WaitForFullGCProc));
thWaitForFullGC->Start();
// While the thread is checking for notifications in
// WaitForFullGCProc, create objects to simulate a server workload.
try
{
int lastCollCount = 0;
int newCollCount = 0;
while (true)
{
if (bAllocate)
{
load->Add(gcnew array<Byte>(1000));
newCollCount = GC::CollectionCount(2);
if (newCollCount != lastCollCount)
{
// Show collection count when it increases:
Console::WriteLine("Gen 2 collection count: {0}", GC::CollectionCount(2).ToString());
lastCollCount = newCollCount;
}
// For ending the example (arbitrary).
if (newCollCount == 500)
{
finalExit = true;
checkForNotify = false;
break;
}
}
}
}
catch (OutOfMemoryException^)
{
Console::WriteLine("Out of memory.");
}
finalExit = true;
checkForNotify = false;
GC::CancelFullGCNotification();
}
catch (InvalidOperationException^ invalidOp)
{
Console::WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
+ invalidOp->Message);
}
}
public:
static void OnFullGCApproachNotify()
{
Console::WriteLine("Redirecting requests.");
// Method that tells the request queuing
// server to not direct requests to this server.
RedirectRequests();
// Method that provides time to
// finish processing pending requests.
FinishExistingRequests();
// This is a good time to induce a GC collection
// because the runtime will induce a full GC soon.
// To be very careful, you can check precede with a
// check of the GC.GCCollectionCount to make sure
// a full GC did not already occur since last notified.
GC::Collect();
Console::WriteLine("Induced a collection.");
}
public:
static void OnFullGCCompleteEndNotify()
{
// Method that informs the request queuing server
// that this server is ready to accept requests again.
AcceptRequests();
Console::WriteLine("Accepting requests again.");
}
public:
static void WaitForFullGCProc()
{
while (true)
{
// CheckForNotify is set to true and false in Main.
while (checkForNotify)
{
// Check for a notification of an approaching collection.
GCNotificationStatus s = GC::WaitForFullGCApproach();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCApproachNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// This can occur if a timeout period
// is specified for WaitForFullGCApproach(Timeout)
// or WaitForFullGCComplete(Timeout)
// and the time out period has elapsed.
Console::WriteLine("GC Notification not applicable.");
break;
}
// Check for a notification of a completed collection.
s = GC::WaitForFullGCComplete();
if (s == GCNotificationStatus::Succeeded)
{
Console::WriteLine("GC Notification raised.");
OnFullGCCompleteEndNotify();
}
else if (s == GCNotificationStatus::Canceled)
{
Console::WriteLine("GC Notification cancelled.");
break;
}
else
{
// Could be a time out.
Console::WriteLine("GC Notification not applicable.");
break;
}
}
Thread::Sleep(500);
// FinalExit is set to true right before
// the main thread cancelled notification.
if (finalExit)
{
break;
}
}
}
private:
static void RedirectRequests()
{
// Code that sends requests
// to other servers.
// Suspend work.
bAllocate = false;
}
static void FinishExistingRequests()
{
// Code that waits a period of time
// for pending requests to finish.
// Clear the simulated workload.
load->Clear();
}
static void AcceptRequests()
{
// Code that resumes processing
// requests on this server.
// Resume work.
bAllocate = true;
}
};
}
int main()
{
GCNotify::Program::Main();
}
using System;
using System.Collections.Generic;
using System.Threading;
namespace GCNotify
{
class Program
{
// Variable for continual checking in the
// While loop in the WaitForFullGCProc method.
static bool checkForNotify = false;
// Variable for suspending work
// (such servicing allocated server requests)
// after a notification is received and then
// resuming allocation after inducing a garbage collection.
static bool bAllocate = false;
// Variable for ending the example.
static bool finalExit = false;
// Collection for objects that
// simulate the server request workload.
static List<byte[]> load = new List<byte[]>();
public static void Main(string[] args)
{
try
{
// Register for a notification.
GC.RegisterForFullGCNotification(10, 10);
Console.WriteLine("Registered for GC notification.");
checkForNotify = true;
bAllocate = true;
// Start a thread using WaitForFullGCProc.
Thread thWaitForFullGC = new Thread(new ThreadStart(WaitForFullGCProc));
thWaitForFullGC.Start();
// While the thread is checking for notifications in
// WaitForFullGCProc, create objects to simulate a server workload.
try
{
int lastCollCount = 0;
int newCollCount = 0;
while (true)
{
if (bAllocate)
{
load.Add(new byte[1000]);
newCollCount = GC.CollectionCount(2);
if (newCollCount != lastCollCount)
{
// Show collection count when it increases:
Console.WriteLine("Gen 2 collection count: {0}", GC.CollectionCount(2).ToString());
lastCollCount = newCollCount;
}
// For ending the example (arbitrary).
if (newCollCount == 500)
{
finalExit = true;
checkForNotify = false;
break;
}
}
}
}
catch (OutOfMemoryException)
{
Console.WriteLine("Out of memory.");
}
finalExit = true;
checkForNotify = false;
GC.CancelFullGCNotification();
}
catch (InvalidOperationException invalidOp)
{
Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled.\n"
+ invalidOp.Message);
}
}
public static void OnFullGCApproachNotify()
{
Console.WriteLine("Redirecting requests.");
// Method that tells the request queuing
// server to not direct requests to this server.
RedirectRequests();
// Method that provides time to
// finish processing pending requests.
FinishExistingRequests();
// This is a good time to induce a GC collection
// because the runtime will induce a full GC soon.
// To be very careful, you can check precede with a
// check of the GC.GCCollectionCount to make sure
// a full GC did not already occur since last notified.
GC.Collect();
Console.WriteLine("Induced a collection.");
}
public static void OnFullGCCompleteEndNotify()
{
// Method that informs the request queuing server
// that this server is ready to accept requests again.
AcceptRequests();
Console.WriteLine("Accepting requests again.");
}
public static void WaitForFullGCProc()
{
while (true)
{
// CheckForNotify is set to true and false in Main.
while (checkForNotify)
{
// Check for a notification of an approaching collection.
GCNotificationStatus s = GC.WaitForFullGCApproach();
if (s == GCNotificationStatus.Succeeded)
{
Console.WriteLine("GC Notification raised.");
OnFullGCApproachNotify();
}
else if (s == GCNotificationStatus.Canceled)
{
Console.WriteLine("GC Notification cancelled.");
break;
}
else
{
// This can occur if a timeout period
// is specified for WaitForFullGCApproach(Timeout)
// or WaitForFullGCComplete(Timeout)
// and the time out period has elapsed.
Console.WriteLine("GC Notification not applicable.");
break;
}
// Check for a notification of a completed collection.
GCNotificationStatus status = GC.WaitForFullGCComplete();
if (status == GCNotificationStatus.Succeeded)
{
Console.WriteLine("GC Notification raised.");
OnFullGCCompleteEndNotify();
}
else if (status == GCNotificationStatus.Canceled)
{
Console.WriteLine("GC Notification cancelled.");
break;
}
else
{
// Could be a time out.
Console.WriteLine("GC Notification not applicable.");
break;
}
}
Thread.Sleep(500);
// FinalExit is set to true right before
// the main thread cancelled notification.
if (finalExit)
{
break;
}
}
}
private static void RedirectRequests()
{
// Code that sends requests
// to other servers.
// Suspend work.
bAllocate = false;
}
private static void FinishExistingRequests()
{
// Code that waits a period of time
// for pending requests to finish.
// Clear the simulated workload.
load.Clear();
}
private static void AcceptRequests()
{
// Code that resumes processing
// requests on this server.
// Resume work.
bAllocate = true;
}
}
}
Imports System.Collections.Generic
Imports System.Threading
Class Program
' Variables for continual checking in the
' While loop in the WaitForFullGcProc method.
Private Shared checkForNotify As Boolean = False
' Variable for suspending work
' (such as servicing allocated server requests)
' after a notification is received and then
' resuming allocation after inducing a garbage collection.
Private Shared bAllocate As Boolean = False
' Variable for ending the example.
Private Shared finalExit As Boolean = False
' Collection for objects that
' simulate the server request workload.
Private Shared load As New List(Of Byte())
Public Shared Sub Main(ByVal args() As String)
Try
' Register for a notification.
GC.RegisterForFullGCNotification(10, 10)
Console.WriteLine("Registered for GC notification.")
bAllocate = True
checkForNotify = True
' Start a thread using WaitForFullGCProc.
Dim thWaitForFullGC As Thread = _
New Thread(New ThreadStart(AddressOf WaitForFullGCProc))
thWaitForFullGC.Start()
' While the thread is checking for notifications in
' WaitForFullGCProc, create objects to simulate a server workload.
Try
Dim lastCollCount As Integer = 0
Dim newCollCount As Integer = 0
While (True)
If bAllocate = True Then
load.Add(New Byte(1000) {})
newCollCount = GC.CollectionCount(2)
If (newCollCount <> lastCollCount) Then
' Show collection count when it increases:
Console.WriteLine("Gen 2 collection count: {0}", _
GC.CollectionCount(2).ToString)
lastCollCount = newCollCount
End If
' For ending the example (arbitrary).
If newCollCount = 500 Then
finalExit = True
checkForNotify = False
bAllocate = False
Exit While
End If
End If
End While
Catch outofMem As OutOfMemoryException
Console.WriteLine("Out of memory.")
End Try
finalExit = True
checkForNotify = False
GC.CancelFullGCNotification()
Catch invalidOp As InvalidOperationException
Console.WriteLine("GC Notifications are not supported while concurrent GC is enabled." _
& vbLf & invalidOp.Message)
End Try
End Sub
Public Shared Sub OnFullGCApproachNotify()
Console.WriteLine("Redirecting requests.")
' Method that tells the request queuing
' server to not direct requests to this server.
RedirectRequests()
' Method that provides time to
' finish processing pending requests.
FinishExistingRequests()
' This is a good time to induce a GC collection
' because the runtime will induce a ful GC soon.
' To be very careful, you can check precede with a
' check of the GC.GCCollectionCount to make sure
' a full GC did not already occur since last notified.
GC.Collect()
Console.WriteLine("Induced a collection.")
End Sub
Public Shared Sub OnFullGCCompleteEndNotify()
' Method that informs the request queuing server
' that this server is ready to accept requests again.
AcceptRequests()
Console.WriteLine("Accepting requests again.")
End Sub
Public Shared Sub WaitForFullGCProc()
While True
' CheckForNotify is set to true and false in Main.
While checkForNotify
' Check for a notification of an approaching collection.
Dim s As GCNotificationStatus = GC.WaitForFullGCApproach
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCApproachNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' This can occur if a timeout period
' is specified for WaitForFullGCApproach(Timeout)
' or WaitForFullGCComplete(Timeout)
' and the time out period has elapsed.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
' Check for a notification of a completed collection.
s = GC.WaitForFullGCComplete
If (s = GCNotificationStatus.Succeeded) Then
Console.WriteLine("GC Notification raised.")
OnFullGCCompleteEndNotify()
ElseIf (s = GCNotificationStatus.Canceled) Then
Console.WriteLine("GC Notification cancelled.")
Exit While
Else
' Could be a time out.
Console.WriteLine("GC Notification not applicable.")
Exit While
End If
End While
Thread.Sleep(500)
' FinalExit is set to true right before
' the main thread cancelled notification.
If finalExit Then
Exit While
End If
End While
End Sub
Private Shared Sub RedirectRequests()
' Code that sends requests
' to other servers.
' Suspend work.
bAllocate = False
End Sub
Private Shared Sub FinishExistingRequests()
' Code that waits a period of time
' for pending requests to finish.
' Clear the simulated workload.
load.Clear()
End Sub
Private Shared Sub AcceptRequests()
' Code that resumes processing
' requests on this server.
' Resume work.
bAllocate = True
End Sub
End Class
Vea también
Col·laboreu amb nosaltres a GitHub
La font d'aquest contingut es pot trobar al GitHub, on també podeu crear i revisar problemes i sol·licituds d'extracció. Per obtenir més informació, consulteu la nostra guia per a col·laboradors.
