Povolení posouzení ohrožení zabezpečení v databázích Azure SQL pomocí expresní konfigurace
Tento skript PowerShellu umožňuje expresní konfiguraci posouzení ohrožení zabezpečení na Azure SQL Serveru.
Pokud už bylo posouzení ohrožení zabezpečení nakonfigurované pomocí klasické konfigurace, tento skript ho migruje do expresní konfigurace a zkopíruje všechny existující definice standardních hodnot. Vaše historie kontrol se do nové konfigurace nezkopíruje. Historie kontrol zůstane přístupná v účtu úložiště, který dříve používala klasická konfigurace.
Požadavky
Tato ukázka vyžaduje Azure PowerShell Az 1.0 nebo novější. Spuštěním zjistíte Get-Module -ListAvailable Az , které verze jsou nainstalované.
Pokud potřebujete nainstalovat, přečtěte si téma Instalace modulu Azure PowerShellu.
Spuštěním příkazu Connect-AzAccount se přihlaste k Azure.
Pokud ještě nemáte předplatné Azure, vytvořte si bezplatný účet Azure před tím, než začnete.
Uživatel by měl mít
Storage Blob Data Readerv účtu úložiště roli.Nastavení sítě úložiště musí být nakonfigurované tak, aby umožňovalo přístup k počítači, který příkaz spouští.
Musíte mít oprávnění k vytváření složek v pracovním adresáři používaném skriptem.
Ukázkový skript – MigraceToExpressConfiguration.ps1
Poznámka:
Při práci s Azure doporučujeme používat modul Azure Az PowerShellu. Pokud chcete začít, přečtěte si téma Instalace Azure PowerShellu. Informace o tom, jak migrovat na modul Az PowerShell, najdete v tématu Migrace Azure PowerShellu z AzureRM na Az.
#Requires -Modules @{ ModuleName="Az.Sql"; ModuleVersion="3.11.0" }
#Requires -Modules @{ ModuleName="Az.Storage"; ModuleVersion="4.8.0" }
#Requires -Modules @{ ModuleName="Az.Accounts"; ModuleVersion="2.9.1" }
#Requires -Version 5.1
<#
.SYNOPSIS
This script configured an Azure SQL Server to the express configuration Vulnerability Assessment feature, scans all databases that belong to the selected server and set baselines (if defined in classic configuration) from the storage that is configures in the policy.
.DESCRIPTION
This script migrates Azure SQL Server to express configuration Vulnerability Assessment feature by executing the following steps:
- It deletes the current Vulnerability Assessment settings (if exists).
This step will reset all the Vulnerability Assessment scans and baselines for all databases.
- It copies the current baselines (if exist) from the customer's storage.
In order to revert this script follow the instructions as mentioned here: https://learn.microsoft.com/azure/defender-for-cloud/sql-azure-vulnerability-assessment-manage?tabs=express#revert-back-to-the-classic-configuration.
.PARAMETER ServerSubscriptionId
The Subscription id that the server belongs to
.PARAMETER ServerResourceGroupName
The Resource Group that the server belongs to
.PARAMETER ServerName
The SQL server name that we want to apply the new SQL Vulnerability Assessment policy to.
.PARAMETER Force
Will remove the old Vulnerability Assessment setting without asking for confirmation.
.EXAMPLE
.\MigratingToExpressConfiguration.ps1 -SubscriptionId "25b642fc-05c3-11ed-b939-0242ac120002" -ResourceGroupName "ResourceGroup01" -ServerName "Server01" -Force
.\MigratingToExpressConfiguration.ps1 -SubscriptionId "25b642fc-05c3-11ed-b939-0242ac120002" -ResourceGroupName "ResourceGroup01" -ServerName "Server01"
#>
param
(
[Parameter(Mandatory = $True)]
[string]$SubscriptionId,
[Parameter(Mandatory = $True)]
[string]$ResourceGroupName,
[Parameter(Mandatory = $True)]
[string]$ServerName,
[Parameter(Mandatory = $False)]
[switch]$Force
)
###### New SQL Vulnerability Assessment Commands ######
#######################################################
function ClearSqlVulnerabilityAssessmentMasterSetting($SubscriptionId, $ResourceGroupName, $ServerName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/databases/master/VulnerabilityAssessments/default?api-version=2021-11-01"
return SendRestRequest -Method "Delete" -Uri $Uri
}
function GetSqlVulnerabilityAssessmentMasterSetting($SubscriptionId, $ResourceGroupName, $ServerName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/databases/master/VulnerabilityAssessments/default?api-version=2021-11-01"
return SendRestRequest -Method "Get" -Uri $Uri
}
function GetSqlVulnerabilityAssessmentServerSetting($SubscriptionId, $ResourceGroupName, $ServerName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/sqlVulnerabilityAssessments/default?api-version=2022-02-01-preview"
return SendRestRequest -Method "Get" -Uri $Uri
}
function SetSqlVulnerabilityAssessmentServerSetting($SubscriptionId, $ResourceGroupName, $ServerName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/sqlVulnerabilityAssessments/default?api-version=2022-02-01-preview"
$Body = @{
properties = @{
state = "Enabled"
}
}
$Body = $Body | ConvertTo-Json
return SendRestRequest -Method "Put" -Uri $Uri -Body $Body
}
function SetSqlVulnerabilityAssessmentBaselineOnUserDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName, $Baseline) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/databases/$DatabaseName/sqlVulnerabilityAssessments/default/baselines/default?api-version=2022-02-01-preview"
$convertedBaseline = $Baseline | ConvertFrom-Json
$properties = @{
properties = @{
latestScan = $false
results = @{}
}
}
if ($convertedBaseline.RuleBaselines.Count -eq 0) {
# baseline is null/empty. No need to send the API call.
return
}
foreach ($rule in $convertedBaseline.RuleBaselines) {
$ruleId = $rule.RuleId
$expectedResults = $rule.Properties.ExpectedResults
if ($ruleId -in $VABinaryRules) {
if ($expectedResults[0][0] -eq "1") {
$expectedResults[0][0] = "True"
}
else {
$expectedResults[0][0] = "False"
}
}
$properties.properties.results[$ruleId] = $expectedResults
}
$Body = $properties | ConvertTo-Json -Depth 5
return SendRestRequest -Method "Put" -Uri $Uri -Body $Body
}
function SetSqlVulnerabilityAssessmentBaselineOnSystemDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName, $Baseline) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/sqlVulnerabilityAssessments/default/baselines/default?api-version=2022-02-01-preview&systemDatabaseName=master"
$convertedBaseline = $Baseline | ConvertFrom-Json
$properties = @{
properties = @{
latestScan = $false
results = @{}
}
}
if ($convertedBaseline.RuleBaselines.Count -eq 0) {
# baseline is null/empty. No need to send the API call.
return
}
foreach ($rule in $convertedBaseline.RuleBaselines) {
$ruleId = $rule.RuleId
$expectedResults = $rule.Properties.ExpectedResults
if ($ruleId -in $VABinaryRules) {
if ($expectedResults[0][0] -eq "1") {
$expectedResults[0][0] = "True"
}
else {
$expectedResults[0][0] = "False"
}
}
$properties.properties.results[$ruleId] = $expectedResults
}
$Body = $properties | ConvertTo-Json -Depth 5
return SendRestRequest -Method "Put" -Uri $Uri -Body $Body
}
function RunSqlVulnerabilityAssessmentScanOnUserDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/databases/$DatabaseName/sqlVulnerabilityAssessments/default/initiateScan?api-version=2022-02-01-preview"
SendRestRequest -Method "Post" -Uri $Uri
}
function RunSqlVulnerabilityAssessmentScanOnSystemDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/sqlVulnerabilityAssessments/default/initiateScan?api-version=2022-02-01-preview&systemDatabaseName=$DatabaseName"
SendRestRequest -Method "Post" -Uri $Uri
}
function GetSqlVulnerabilityAssessmentScanOnUserDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/databases/$DatabaseName/sqlVulnerabilityAssessments/default/scans/latest?api-version=2022-02-01-preview"
return SendRestRequest -Method "Get" -Uri $Uri
}
function GetSqlVulnerabilityAssessmentScanOnSystemDatabase($SubscriptionId, $ResourceGroupName, $ServerName, $DatabaseName) {
$Uri = "/subscriptions/$SubscriptionId/resourceGroups/$ResourceGroupName/providers/Microsoft.Sql/servers/$ServerName/sqlVulnerabilityAssessments/default/scans/latest?api-version=2022-02-01-preview&systemDatabaseName=$DatabaseName"
return SendRestRequest -Method "Get" -Uri $Uri
}
function SendRestRequest(
[Parameter(Mandatory = $True)]
[string] $Method,
[Parameter(Mandatory = $True)]
[string] $Uri,
[parameter( Mandatory = $false )]
[string] $Body = "DEFAULT") {
$Params = @{
Method = $Method
Path = $Uri
}
if (!($Body -eq "DEFAULT")) {
$Params = @{
Method = $Method
Path = $Uri
Payload = $Body
}
}
Invoke-AzRestMethod @Params
}
#######################################################
function LogMessage {
[CmdletBinding()]
Param
(
[Parameter(Mandatory=$true, Position=0)]
[string]$LogMessage
)
Write-Host ("{0} - {1}" -f (Get-Date), $LogMessage)
}
function LogError {
[CmdletBinding()]
Param
(
[Parameter(Mandatory=$true, Position=0)]
[string]$LogMessage
)
Write-Error ("{0} - {1}" -f (Get-Date), $LogMessage)
}
#######################################################
function Retry() {
param(
[Parameter(Mandatory = $true)][Action]$action,
[Parameter(Mandatory = $false)][int]$maxAttempts = 3
)
$attempts = 1
do {
try {
$result = $action.Invoke();
return $result
}
catch [Exception] {
LogMessage -LogMessage $_.Exception.Message
}
# exponential backoff delay
$attempts++
if ($attempts -le $maxAttempts) {
$retryDelaySeconds = [math]::Pow(2, $attempts)
$retryDelaySeconds = $retryDelaySeconds - 1 # Exponential Backoff Max == (2^n)-1
LogMessage -LogMessage ("Action failed. Waiting " + $retryDelaySeconds + " seconds before attempt " + $attempts + " of " + $maxAttempts + ".")
Start-Sleep $retryDelaySeconds
}
else {
LogError $_.Exception.Message
$ex = New-Object System.Exception($_.Exception.Message)
throw $ex
}
} while ($attempts -le $maxAttempts)
}
function HaveVulnerabilityAssessmentSetting($ResourceGroupName, $ServerName, $Databases) {
# Check if we have a server setting.
LogMessage -LogMessage "Check Vulnerability Assessment setting for '$($ServerName)' server"
$vaServerSetting = Get-AzSqlServerVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName
if (![string]::IsNullOrEmpty($vaServerSetting.StorageAccountName)) {
return $true
}
# Check if we have a database setting for server
foreach ($database in $Databases) {
LogMessage -LogMessage "Check VA settings for '$($database.DatabaseName)' database"
$vaDatabaseSetting = Get-AzSqlDatabaseVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName
if (![string]::IsNullOrEmpty($vaDatabaseSetting.StorageAccountName)) {
return $true
}
}
# Check if we have a master setting for server
$vaSettingMaster = GetSqlVulnerabilityAssessmentMasterSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
$object = ConvertFrom-Json $vaSettingMaster.Content
if (![string]::IsNullOrEmpty($object.properties.storageContainerPath)) {
return $true
}
return $false
}
function HaveExpressConfigurationVulnerabilityAssessmentSetting($SubscriptionId, $ResourceGroupName, $ServerName) {
# Check if we have a server setting.
LogMessage -LogMessage "Check express configuration Vulnerability Assessment setting for '$($ServerName)' server"
$Response = GetSqlVulnerabilityAssessmentServerSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
if ($Response.Content.Contains("Enabled")) {
return $true
}
return $false
}
function GetBlobsFromStorage($ContainerName, $Context) {
# Use Get-AzStorageBlob to retrieve a list of blobs from the container
$blobs = Get-AzStorageBlob -Container $ContainerName -Context $Context
if ([string]::IsNullOrEmpty($blobs)) {
return
}
return $blobs
}
function ExtractBaselineBlobName($ServerName, $DatabaseName) {
$prefix = "scans/$ServerName/$DatabaseName/baseline"
# Filter the list to include only blobs with names starting with "baseline"
$baselineBlobs = $blobs | Where-Object { $_.Name.StartsWith($prefix) }
if ($baselineBlobs.Count -eq 0) {
return
}
else {
# Sort the list by LastModified descending and get the first item
$mostRecentBlob = $baselineBlobs | Sort-Object LastModified -Descending | Select-Object -First 1
# Get the name of the most recent blob
$mostRecentBlobName = $mostRecentBlob.Name
LogMessage -LogMessage "The most recent blob with the 'baseline' prefix is: $mostRecentBlobName"
return $mostRecentBlobName
}
}
function ReadDatabaseBaselineFromStorage($ServerName, $BlobName, $ContainerName, $Context) {
# Use Get-AzStorageBlobContent to retrieve the blob content as a string
$blobContent = Get-AzStorageBlobContent -Blob $BlobName -Container $ContainerName -Context $Context
$blobContent = $blobContent.ICloudBlob.DownloadText()
if ([string]::IsNullOrEmpty($blobContent)) {
return
}
return $blobContent
}
function GetBaselineConfigurationForDatabase($ServerName, $DatabaseName, $VaDatabasePolicyStorage, $VaDatabasePolicyContainer) {
# Get storage account context
$ctx = New-AzStorageContext -StorageAccountName $VaDatabasePolicyStorage
# Extract baseline blob name
$blobs = GetBlobsFromStorage -ContainerName $VaDatabasePolicyContainer -Context $ctx
if ([string]::IsNullOrEmpty($blobs)) {
$ex = New-Object System.Exception("Failed to get blobs from $($VaDatabasePolicyStorage) storage. Verify that you have Storage Blob Data Reader role assignment on the storage.")
throw $ex
}
# Extract baseline blob name
$blobName = ExtractBaselineBlobName -ServerName $ServerName -DatabaseName $DatabaseName
if ([string]::IsNullOrEmpty($blobName)) {
LogMessage -LogMessage "No baseline blob was found for $($DatabaseName) database."
return
}
# Extract the baseline
$baseline = ReadDatabaseBaselineFromStorage -ServerName $ServerName -BlobName $blobName -ContainerName $VaDatabasePolicyContainer -Context $ctx
if ([string]::IsNullOrEmpty($baseline)) {
$ex = New-Object System.Exception("Failed to get blobs from $($VaDatabasePolicyStorage) storage. Verify that you have Storage Blob Data Reader role assignment on the storage.")
throw $ex
}
LogMessage -LogMessage "Found baseline for $($DatabaseName) database."
return $baseline
}
function ClearBaselineFolder() {
# Clean baseline folder
$scriptPath = Get-Location
$folderPath = Join-Path -Path $scriptPath.Path -ChildPath "scans"
if (Test-Path $folderPath) {
# Remove folder from previous runs
Remove-Item $folderPath -Recurse
}
}
#######################################################
$VABinaryRules = @("VA1018", "VA1022", "VA1023", "VA1024", "VA1043", "VA1044", "VA1045", "VA1051", "VA1052", "VA1053", "VA1058", "VA1059", "VA1067", "VA1071", "VA1072", "VA1091", "VA1092", "VA1093", "VA1102", "VA1143", "VA1219", "VA1230", "VA1235", "VA1245", "VA1264", "VA1265", "VA1277", "VA1279", "VA1283", "VA2060", "VA2061", "VA2121", "VA2122", "VA2128")
#######################################################
# Connect
$subscription = Connect-AzAccount -Subscription $SubscriptionId
if ([string]::IsNullOrEmpty($subscription))
{
LogError "Failed to get the subscription. Migration cancelled. Fix errors and try again later."
return
}
$srv = Get-AzSqlServer -ResourceGroupName $ResourceGroupName -ServerName $ServerName
if ([string]::IsNullOrEmpty($srv))
{
LogError "The server was not found. Migration cancelled. Fix errors and try again later."
return
}
ClearBaselineFolder
$baselines = @{}
$databases = Get-AzSqlDatabase -ResourceGroupName $ResourceGroupName -ServerName $ServerName | Where-Object { $_.DatabaseName -ne "master" }
$haveVaSetting = HaveVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -Databases $databases
$haveExpressConfigurationVA = HaveExpressConfigurationVulnerabilityAssessmentSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
if ($haveExpressConfigurationVA) {
LogMessage -LogMessage "Express configuration vulnerability assessment setting is already exist on this server. Cancelling script."
return
}
if ($haveVaSetting) {
# Get server policy container path
$vaServerSetting = Get-AzSqlServerVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName
$vaServerPolicyStorage = $vaServerSetting.StorageAccountName
$vaServerPolicyContainer = $vaServerSetting.ScanResultsContainerName
$canRemoveVa = $true
# Go over each database and get the baseline (is exist).
$i = 0
foreach ($database in $Databases) {
$i += 1
$completed = ($i/$Databases.count) * 100
Write-Progress -Activity "Processing" -Status "Progress:" -PercentComplete $completed
LogMessage -LogMessage "Starting to fetch baseline for $($database.DatabaseName) database."
$vaDatabaseSetting = Get-AzSqlDatabaseVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName
$adsDatabasePolicy = Get-AzSqlDatabaseAdvancedThreatProtectionSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName
$adsDatabasePolicyEnabled = ($null -ne $adsDatabasePolicy.ThreatDetectionState -and $adsDatabasePolicy.ThreatDetectionState -eq "Enabled") -or ($null -ne $adsDatabasePolicy.AdvancedThreatProtectionState -and $adsDatabasePolicy.AdvancedThreatProtectionState -eq "Enabled") # Handle breaking changes in the command.
$containsDatabasePolicy = $adsDatabasePolicyEnabled -and ![string]::IsNullOrEmpty($vaDatabaseSetting.StorageAccountName)
if ($containsDatabasePolicy) {
# The database has database policy. Using the database policy storage.
$vaDatabasePolicyStorage = $vaDatabaseSetting.StorageAccountName
$vaDatabasePolicyContainer = $vaDatabaseSetting.ScanResultsContainerName
}
else {
$vaDatabasePolicyStorage = $vaServerPolicyStorage
$vaDatabasePolicyContainer = $vaServerPolicyContainer
}
try {
$baseline = GetBaselineConfigurationForDatabase -ServerName $ServerName -DatabaseName $database.DatabaseName -VaDatabasePolicyStorage $vaDatabasePolicyStorage -VaDatabasePolicyContainer $vaDatabasePolicyContainer
$baselines[$database.DatabaseName] = $baseline
LogMessage -LogMessage "Finished to fetch baseline for $($database.DatabaseName) database."
}
catch {
LogError "An error occurred: $($_.Exception.Message) while handling $($database.DatabaseName) database."
$canRemoveVa = $false
}
}
Write-Progress -Activity "Processing" -Status "Ready" -Completed
LogMessage -LogMessage "Starting to fetch baseline for master database."
$vaSettingMaster = GetSqlVulnerabilityAssessmentMasterSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
$vaSettingMaster = ConvertFrom-Json $vaSettingMaster.Content
$adsDatabasePolicy = Get-AzSqlDatabaseAdvancedThreatProtectionSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName "master"
$adsDatabasePolicyEnabled = ($null -ne $adsDatabasePolicy.ThreatDetectionState -and $adsDatabasePolicy.ThreatDetectionState -eq "Enabled") -or ($null -ne $adsDatabasePolicy.AdvancedThreatProtectionState -and $adsDatabasePolicy.AdvancedThreatProtectionState -eq "Enabled") # Handle breaking changes in the command.
$containsDatabasePolicy = $adsDatabasePolicyEnabled -and ![string]::IsNullOrEmpty($vaSettingMaster.properties.storageContainerPath)
if ($containsDatabasePolicy -and ![string]::IsNullOrEmpty($vaServerPolicyStorage)) {
# The database has database policy. Using the database policy storage.
$vaDatabasePolicyStorage = $vaSettingMaster.properties.storageContainerPath.Split("/")[2].Split(".")[0]
$vaDatabasePolicyContainer = $vaSettingMaster.properties.storageContainerPath.Split("/")[3]
}
else {
$vaDatabasePolicyStorage = $vaServerPolicyStorage
$vaDatabasePolicyContainer = $vaServerPolicyContainer
}
try {
$baseline = GetBaselineConfigurationForDatabase -ServerName $ServerName -DatabaseName "master" -VaDatabasePolicyStorage $vaDatabasePolicyStorage -VaDatabasePolicyContainer $vaDatabasePolicyContainer
$baselines["master"] = $baseline
LogMessage -LogMessage "Finished to fetch baseline for master database."
}
catch {
LogError "An error occurred: $($_.Exception.Message) while handling master database."
$canRemoveVa = $false
}
ClearBaselineFolder
if ($canRemoveVa) {
if (!$Force) {
LogMessage -LogMessage "We are going to remove the current Vulnerability Assessment settings for this server and underlying databases."
$Confirmation = Read-Host -Prompt "Do you approve (y/n)?"
if ($Confirmation -ne "y") {
LogMessage -LogMessage "You chose to stop the migration process. Existing VA settings will not be changed."
return
}
}
# Clear all server and databases policies
$i = 0
foreach ($database in $Databases) {
$i += 1
$completed = ($i/$Databases.count) * 100
Write-Progress -Activity "Processing" -Status "Progress:" -PercentComplete $completed
LogMessage -LogMessage "Clear Vulnerability Assessment setting for '$($database.DatabaseName)' database."
Clear-AzSqlDatabaseVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName
}
Write-Progress -Activity "Processing" -Status "Ready" -Completed
# Removing Vulnerability Assessment settings from master db
Retry -action { ClearSqlVulnerabilityAssessmentMasterSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName }
# Removing old server Vulnerability Assessment setting
LogMessage -LogMessage "Clear Vulnerability Assessment setting for '$($ServerName)' server."
Clear-AzSqlServerVulnerabilityAssessmentSetting -ResourceGroupName $ResourceGroupName -ServerName $ServerName
}
else {
LogError "Migration cancelled. Fix errors and try again later."
return
}
}
# Set new SQL Vulnerability Assessment Setting
LogMessage -LogMessage "Add express configuration Vulnerability Assessment feature setting for '$($ServerName)' server."
$Response = SetSqlVulnerabilityAssessmentServerSetting -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
$successStatusCodes = @(200, 201, 202)
if ($Response.StatusCode -in $successStatusCodes) {
LogMessage -LogMessage "Congratulations, your server '$($ServerName)' server is set up with express configuration Vulnerability Assessment feature"
}
else {
LogMessage -LogMessage "There was a problem to enable express configuration Vulnerability Assessment feature on the '$($ServerName)' server. Error '$($Response.StatusCode)': '$($Response.Content)'"
return
}
# Run a new scan on all the databases
$i = 0
foreach ($database in $Databases) {
$i += 1
$completed = ($i/$Databases.count) * 100
Write-Progress -Activity "Processing" -Status "Progress:" -PercentComplete $completed
LogMessage -LogMessage "Run scan on '$($database.DatabaseName)' database."
Retry -action { RunSqlVulnerabilityAssessmentScanOnUserDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName }
}
Write-Progress -Activity "Processing" -Status "Ready" -Completed
LogMessage -LogMessage "Run scan on 'master' database."
Retry -action { RunSqlVulnerabilityAssessmentScanOnSystemDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName "master" }
LogMessage -LogMessage "Wait for scan results.."
Start-Sleep 60
# Wait for scan results
$i = 0
foreach ($database in $Databases) {
$i += 1
$completed = ($i/$Databases.count) * 100
Write-Progress -Activity "Processing" -Status "Progress:" -PercentComplete $completed
try {
LogMessage -LogMessage "Waiting for results for $($database.DatabaseName) database."
Retry -action { GetSqlVulnerabilityAssessmentScanOnUserDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName }
LogMessage -LogMessage "Received results for $($database.DatabaseName) database."
}
catch {
LogMessage -LogMessage "Failed to get latest scan results for $($database.DatabaseName). Stopping the migration."
LogMessage -LogMessage "You can revert back to classic configuration. For more information: https://learn.microsoft.com/azure/defender-for-cloud/sql-azure-vulnerability-assessment-manage?tabs=express#revert-back-to-the-classic-configuration"
return
}
}
Write-Progress -Activity "Processing" -Status "Ready" -Completed
try {
LogMessage -LogMessage "Waiting for results for master database"
Retry -action { GetSqlVulnerabilityAssessmentScanOnSystemDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName "master" }
}
catch {
LogMessage -LogMessage "Failed to get latest scan results for master. Stopping the migration"
LogMessage -LogMessage "You can revert back to classic configuration. For more information: https://learn.microsoft.com/azure/defender-for-cloud/sql-azure-vulnerability-assessment-manage?tabs=express#revert-back-to-the-classic-configuration"
return
}
# Apply baselines from each database
$successMigration = @()
$failedMigration = @()
if (!$haveVaSetting) {
# no need to migrate baseline as there is no baseline to extract.
$successMigration = $databases
}
else {
$i = 0
foreach ($database in $Databases) {
$i += 1
$completed = ($i/$Databases.count) * 100
Write-Progress -Activity "Processing" -Status "Progress:" -PercentComplete $completed
try {
if (![string]::IsNullOrEmpty($baselines[$database.DatabaseName])) {
LogMessage -LogMessage "Applying baseline for '$($database.DatabaseName)' database."
Retry -action { SetSqlVulnerabilityAssessmentBaselineOnUserDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName $database.DatabaseName -Baseline $baselines[$database.DatabaseName] }
}
LogMessage -LogMessage "Baseline was successfully applied for '$($database.DatabaseName)' database."
$successMigration += $database.DatabaseName
}
catch {
LogError "Failed to set baseline for $($database.DatabaseName) database."
$failedMigration += $database.DatabaseName
}
}
Write-Progress -Activity "Processing" -Status "Ready" -Completed
try {
if (![string]::IsNullOrEmpty($baselines["master"])) {
LogMessage -LogMessage "Applying baseline for 'master' database."
Retry -action { SetSqlVulnerabilityAssessmentBaselineOnSystemDatabase -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName -DatabaseName "master" -Baseline $baselines["master"] }
$successMigration += "master"
}
}
catch {
LogError "Failed to set baseline for master database."
$failedMigration += "master"
}
}
if ($successMigration.Count -eq 0) {
LogError "Failed to set baseline for all the databases."
LogMessage -LogMessage "You can revert back to classic configuration. For more information: https://learn.microsoft.com/azure/defender-for-cloud/sql-azure-vulnerability-assessment-manage?tabs=express#revert-back-to-the-classic-configuration"
}
elseif ($failedMigration.Count -eq 0) {
LogMessage -LogMessage "The migration process completed successfully."
}
else {
LogMessage -LogMessage "The migration process completed. The migration was successful for $($successMigration -join ',') and unsuccessful for $($failedMigration -join ',')"
LogMessage -LogMessage "You can revert back to classic configuration. For more information: https://learn.microsoft.com/azure/defender-for-cloud/sql-azure-vulnerability-assessment-manage?tabs=express#revert-back-to-the-classic-configuration"
}
Příklad:
Write-Host "----------- Migrating To express configuration example -----------"
$ServerName = "<Your server name>" # The server name.
$SubscriptionId = "<Your subscription>" # The subscription id that the servers belong to.
$ResourceGroupName = "<Your resource group name>" # The resource group name that the servers belong to.
.\MigratingToExpressConfiguration.ps1 -SubscriptionId $SubscriptionId -ResourceGroupName $ResourceGroupName -ServerName $ServerName
Další kroky
Další informace o modulu Azure PowerShellu najdete v dokumentaci k Azure PowerShellu.