Sdílet prostřednictvím


SFTP

Connect to an SFTP server to receive file updates.

This article describes the operations for the SFTP built-in connector, which is available only for Standard workflows in single-tenant Azure Logic Apps. If you're looking for the SFTP-SSH managed connector operations instead, see SFTP managed connector reference.

The SFTP built-in connector runs on the Secure Shell (SSH) protocol to encrypt file data and uses the SSH.NET library, which is an open-source Secure Shell (SSH) library that supports .NET.

Connector how-to guide

For more information about connecting to an SFTP server from your workflow in Azure Logic Apps, see Connect to an SFTP file server using SSH from workflows in Azure Logic Apps.

Differences from the SFTP-SSH managed connector

The SFTP built-in connector differs in the following ways:

  • Operations use streaming rather than chunking.
  • Triggers compare file versions not only based on the last modified timestamp, but also other file attributes such as size, permissions, and name.

Connection creation, authentication, and permissions

  • The SFTP built-in connector currently doesn't support the following SFTP servers:

    • FileMage Gateway
    • IBM DataPower
    • MessageWay
    • OpenText Secure MFT
    • OpenText GXS
    • VShell Secure File Transfer Server
  • When you create a connection to your SFTP server, you have to provide a name for your connection, your SFTP server address, and your user name.

  • You can optionally provide a root directory to specify relative paths in trigger and action inputs. This directory is prefixed in all input paths to create a full path to the resource, such as the input directory or file.

    Note

    If you don't specify a root directory, you must provide full absolute paths where applicable in trigger and action inputs.

  • The SFTP built-in connector supports both password authentication and private key authentication. You can use either method, but if you provide values for both methods, the client tries to authenticate using both. If either method succeeds, the client successfully creates the connection.

  • You can omit the user password, but only if you don't provide an SSH private key. If you provide a private key, the client doesn't attempt password authentication.

  • The SFTP built-in connector supports only the following private key formats, key exchange algorithms, encryption algorithms, and fingerprints:

SSH private key authentication

  • If you use an SSH private key, make sure to meet the following requirements:

    • The private key uses a multi-line format with a header and footer.

    • When you provide the private key for your connection, don't manually enter or edit the key, which might cause the connection to fail. Instead, make sure that you copy the key from your SSH private key file, and paste that key into the connection information box.

      To correctly copy and paste your SSH private key, follow these steps:

      1. Open your SSH private key file in any text editor. These steps continue using Notepad as an example.
      2. In Notepad, from the Edit menu, select Select all. (Press Ctrl + A)
      3. From the Edit menu, select Copy.
      4. In the SFTP-SSH connection information box, paste the complete copied key into the SSH private key property, which supports multiple lines. Don't manually enter or edit the key.
      5. After you finish entering the connection details, select Create.

Convert PuTTY-based key to OpenSSH

If you have a PuTTY-based key, this key's format and the OpenSSH format use different file name extensions. The PuTTY format uses the .ppk, or PuTTY Private Key, file name extension. The OpenSSH format uses the .pem, or Privacy Enhanced Mail, file name extension. If your private key is in PuTTY format, and you have to use OpenSSH format, first convert the key to the OpenSSH format by following these steps:

  • Unix-based OS

    1. If you don't have the PuTTY tools installed on your system, do that now, for example: sudo apt-get install -y putty

    2. Run the following command, which creates a file that you can use with the SFTP-SSH connector:

      puttygen <path-to-private-key-file-in-PuTTY-format> -O private-openssh -o <path-to-private-key-file-in-OpenSSH-format>

      For example:

      puttygen /tmp/sftp/my-private-key-putty.ppk -O private-openssh -o /tmp/sftp/my-private-key-openssh.pem

  • Windows OS

    1. If you haven't done so already, download the latest PuTTY Generator (puttygen.exe) tool, and then open the tool.
    2. In the PuTTY Key Generator tool (puttygen.exe), under Actions, select Load.
    3. Browse to your private key file in PuTTY format, and select Open.
    4. From the Conversions menu, select Export OpenSSH key.
    5. Save the private key file with the .pem file name extension.

Provide an MD5 fingerprint to verify the SFTP host server

You can optionally provide the MD5 fingerprint for the host server's public key. If both the host server's fingerprint and expected fingerprint don't match, the connector rejects the connection.

You have the public key

If you have the host server's public key, which is a 47-character string that's delimited by colons, you can get the MD5 fingerprint, which is a sequence with 16 pairs of hex digits delimited by colons, by using tools such as ssh-keygen.

For example, from a Bash prompt, enter the following command: ssh-keygen -l -f id_rsa.pub -E md5

You don't have the public key

If you don't have the host server's public key, you can use the latest Server and Protocol Information Dialog tool by WinSCP, or you can use the PuTTY Configuration tool instead:

  1. In the PuTTY Configuration tool (putty.exe), in the Category window, expand Connection > SSH > Host keys.

  2. Under Host key algorithm preference, open the Algorithm selection policy list, and check that RSA appears at the top.

  3. If RSA doesn't appear at the top, select RSA, and then select Up until RSA moves to the top.

  4. Connect to your SFTP server with PuTTY. After the connection is created, when the PUTTY security alert appears, select More info.

    Note

    If the security alert doesn't appear, try clearing the SshHostKeys entry. Open the Windows registry editor, and browse to the following entry:

    Computer\HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\SshHostKeys

  5. After the PuTTY: information about the server's host key box appears, find the MD5 fingerprint property, and copy the 47-character string value, which looks like the following example:

    **:**:**:**:**:**:**:**:**:**:**:**:**:**:**:**

Built-in connector settings

In a Standard logic app resource, the SFTP built-in connector includes settings that control various thresholds for performance, timeout, execution time, and so on. For more information, review the following documentation:

Known issues and limitations with triggers

Trigger Description
When a file is added or updated This trigger returns only one file per poll, even if multiple files are added or updated. Any other added or updated files are returned one at a time with each subsequent poll.

- After the trigger returns a file, the trigger won't fetch the file again unless a change occurs. To return multiple added or updated files, use the When files are added or updated trigger instead.

- If you enable the setting named Include file content, the trigger returns file content along with file metadata, but only for files up to 200 MB. If you're working with larger files, use the Get file content (V2) action instead.

- If you use the input parameter named Exclude file extensions, the trigger ignores any files with the specified file extensions. However, make sure to omit the period (.) prefix for the file extension.
When files are added or updated This trigger returns an array of multiple file objects per poll.

- By default, triggers that return an array have a Split On setting that's enabled by default. With this setting enabled, the trigger automatically debatches or splits the array into individual items and runs a separate workflow instance to process each array item. All the workflow instances run in parallel so that the array items are processed at the same time. When the Split On setting is enabled, the trigger returns the outputs for all the array items as lists. Any subsequent actions that reference these outputs have to first handle these outputs as lists. To handle each array item individually, you can add extra actions. For example, to iterate through these array items, you can use a For each loop. For triggers that return only metadata or properties, use an action that gets the array item's metadata first, and then use an action to get the items contents. If you want to perform batch or array operations and consider disabling the Split On setting, review the potential problem around incomplete or delayed results as described later in this section.

- If you enable the input parameter named Include file content, make sure that the sum of the file sizes that are added or updated between polls doesn't exceed 200 MB, which is the size limit on the file content that the trigger can return. Otherwise, the trigger might fail with Out of memory exceptions. If you're unsure about the file sizes, don't enable the Include file content setting, and use the Get file content (V2) action instead.

- If you specify a value for the input parameter named Maximum file count, the trigger restricts the number of files to return in a single poll, and returns the remaining files in subsequent polls. However, the trigger doesn't impose any ordering on the files returned in the output.
  • SFTP triggers work only on files in the specified folder, not subfolders. To also check a folder's subfolders, set up a separate flow for each subfolder.

  • The first poll initializes the trigger state, so SFTP triggers won't detect any file changes at this time because no previous state exists for comparison. File changes or additions are detected only after the first poll.

  • SFTP triggers might experience missing, incomplete, or delayed results.

    • Missing results

      • On your SFTP server, use separate folders for triggers to monitor and for storage. This practice helps your monitoring folder stay small and keep triggers performing well because they check and compare the names and timestamps for all files in the folder.

        If you use the same folder for monitoring and storage, triggers might start to behave unexpectedly if too many files accumulate, for example, more than 500 files. Triggers might not fire at all or fail to return random files.

        If this problem happens to you, try moving the files that triggers no longer need to work on to a separate storage folder. This recommendation also means you'll need to find a way that automates moving these files to storage.

      • Disable last modified timestamp preservation in any external tool or client that you use with your SFTP server.

        If you use any external tool or client that adds or updates files on your SFTP server, disable any feature that preserves a file's last modified timestamp. SFTP triggers work by polling, or checking, the SFTP file system and looking for any files that changed since the last poll. SFTP built-in connector triggers compare file versions using file attributes such as the last modified timestamp, size, permissions, and name. If you add or update a file with a timestamp that's earlier than the currently tracked last modified timestamp, the SFTP trigger won't detect this file.

        The following table lists some commonly used tools that preserve this timestamp and the steps to disable this feature:

        SFTP client Action
        WinSCP Go to Options > Preferences > Transfer > Edit > Preserve timestamp > Disable.
        FileZilla Go to Transfer > Preserve timestamps of transferred files > Disable.
    • Incomplete or delayed results

      When an SFTP trigger checks for a newly created, added, or updated file, the trigger also checks whether the file is complete. For example, a file might have changes in progress when the trigger checks the SFTP server. To avoid returning an incomplete file, the trigger notes the file's last modified timestamp, but doesn't immediately return the file. Instead, the trigger returns the file only when the trigger checks the server again.

      Sometimes, this behavior might cause a delay that lasts as long as almost twice the trigger's polling interval. Due to this behavior, if you disable the SFTP trigger's Split On setting, the SFTP trigger might not return all files at the same time.

Known issues and limitations with actions

Action Description
Copy file Performs the file copy entirely on the SFTP server, so no data flows into your workflow, and the action's output body contains no data. Performance depends entirely on your file server's performance, for example, CPU, storage type, and so on. Make sure the destination path is a file path that includes the file name, not a folder path.
Get file content Returns file content up to 200 MB per file. The output contains the file content along with file name and file size. This action handles different file types in different ways, based on the file extension. For example, binary file types are read as a stream of bytes, which is written to a memory buffer and encoded as a base64 string. If a file doesn't have an extension, the action handles the file as binary data. The action returns the file content, file name, and file size as output.
Get file content (V2) Returns file content of any size. The action handles files smaller than 100 MB in the same way as the V1 action. For files larger than 100 MB, the action handles the content as a stream of bytes, no matter the file type. The action saves the data directly to storage, skipping the memory buffer and resulting in better performance for larger files. The action returns only the file content as output.
Rename file Renames a file in the same folder.

- Make sure that the input parameters named File path and New name specify the file path for the file to rename and the new file name to use, respectively. The new file name must be only the name without the path.

- This action doesn't permit moving files across different folders, so instead, use the Copy file action and Delete file action in this order in your workflow.
Upload file content Uploads the specified content to the specified file path on the SFTP server. The action currently supports uploading content up to 2 GB.

- If you don't specify the optional input parameter named The file content, the action creates an empty file.

- If you set the required input parameter named Overwrite existing files to No, and you try to overwrite the existing file, the action fails with the error message Bad Request (HTTP 400).

Troubleshoot errors

Connection errors

The following errors might happen when you try to create the SSH connection before any trigger or actions starts to run. All these errors use 400 as the HTTP status code and are not retryable, which means that Azure Logic Apps doesn't retry the operation even if you set a custom retry policy. Only those operations that fail with the status codes 408, 429, and 5xx are retried, based on the retry interval specified by the retry policy. You can always manually resubmit the workflow run to try again.

Error Resolution
The provided input for port is invalid. Please provide a valid integer in range [1,65535] without any leading and trailing whitespaces. The Port input paramater in the connection setup must be an integer within the range from 1 to 65,535 and can't have any trailing or leading whitespaces.
The SFTP host can't be trusted because the host key MD5 fingerprint '<fingerprint-value-from-host-server>' doesn't match the specified fingerprint '<fingerprint-value-from-input>'. Make sure that the provided MD5 fingerprint matches the fingerprint expected by the SFTP host server.
The specified host key fingerprint doesn't use a valid format. The fingerprint must be an MD5 hash of the host's public key where octets are separated by a colon (':'). Received error: <format-error> Make sure that provided MD5 fingerprint uses MD5 hash format, not other hashes such as SHA-256. The following example shows a valid MD5 hash format:

f6:fc:1c:03:17:5f:67:4f:1f:0b:50:5a:9f:f9:30:e5
The root directory parameter isn't valid. The value must start either with a path separator such as slashes ('/' and ''), or with an alphabetic character followed by a colon (':'). - Unix-based file systems use a path separator at the start of absolute paths.
- Windows-based file paths can start with C: or other alphabets. No other combinations are permitted. If your file system is exceptionally different, ignore the root directory parameter and provide full paths in all applicable SFTP trigger and action inputs.
Invalid private key file. You must provide a valid private key in the connection parameters. For more information, see private keys supported by SSH.NET.
Key exchange negotiation failed. See key exchange methods supported by SSH.NET.
- Invalid public key.
- Invalid private key.
- Encryption error.
Any of these errors might result from encryption failure while exchanging data. If all the actions in the workflow fail to run, make sure that your SFTP server uses one of the encryption methods supported by SSH.NET.

Operation errors

Operation HTTP status Error Resolution
All triggers 400 The specified file extension name '<file-extension-name>' for the input parameter named '<input-parameter>' is prefixed with a period ('.') as a separator. File extension names must omit this separator. In trigger inputs, omit the period (.) prefix from file extension names, for example, use "xlsx", not ".xslx".
Any action 401 <error message from server> Make sure that you have permissions to perform this action on the specified resource.
Any action 404 The file or directory path '<file-path>' isn't valid. The file with the provided path doesn't exist. To skip deletion when you're not sure whether the file exists, use the input parameter named Skip deletion if file doesn't exist.
Copy file 400 The file with path '<file-path>' already exists. To overwrite existing files, set the input parameter named Overwrite existing files. Set the Overwrite existing files input parameter to True when you want to overwrite existing files using this action.
Copy file 400 The source and destination paths must be file paths that end with a file name, not a folder name. Make sure the specified source and destination paths end with file names, not folder names.
Delete file 400 The specified path '<path>' is a folder path, which this action can't delete. Provide a file path instead. Make sure the path is a file path, not a folder path.
Get file content 400 Can't read the file content because the target path '<file-path>' is a folder path. Make sure to provide a path to a file, not a folder.
Get file content 400 The file size of the file with path '<file-path>' is a negative value '<file-size>' as returned by the server. Some servers don't handle file metadata well and can erroneously return a negative file size.
Get file content 400 Read operations aren't allowed on the '<file-name>' file. Make sure that you have read permissions for this file. If you don't have read permissions for the file, you need to first set up permissions.
Get file content 413 Can't get the file that's named '<file-path>'. The file size '<file-size>' exceeds the limit of '<file-size-limit>' bytes for this action. For larger files, use the Get file content (V2) action. To get files that aren't referenceable in memory, use the Get file content (V2) action.
Rename file 409 Can't rename the file to the new file path '<new-file-path>'. A file already exists with this path. This action doesn't allow overwriting files. Make sure that no file already exists with the specified name that you want to use.
Upload file content 400 The specified file path '<file-path>' doesn't have a valid file name. Include a valid file name. Make sure to provide a path that ends with a file name, not a directory name.
Upload file content 409 The file with path '<file-path>' already exists. To overwrite existing files, set the input parameter named Overwrite existing files. Set the Overwrite existing files input parameter to True when you want to overwrite existing files using this action.

Authentication

SSH host address

The IP or host name for the SSH server host.

Parameters

Name Description Type Required Allowed Values
SSH host address The IP or host name for the SSH server host. string True

Username

The username for SFTP server sign-in and authentication.

Parameters

Name Description Type Required Allowed Values
Username The username for SFTP server sign-in and authentication. string True

Password

The password for SFTP server sign-in and authentication.

Parameters

Name Description Type Required Allowed Values
Password The password for SFTP server sign-in and authentication. securestring False

Port number

The port number for the SFTP server.

Parameters

Name Description Type Required Allowed Values
Port number The port number for the SFTP server. int False

Root directory

The root directory on the SFTP server.

Parameters

Name Description Type Required Allowed Values
Root directory The root directory on the SFTP server. string False

SSH private key

Parameters

Name Description Type Required Allowed Values
SSH private key string False

SSH private key passphrase

Parameters

Name Description Type Required Allowed Values
SSH private key passphrase securestring False

Host key fingerprint

Parameters

Name Description Type Required Allowed Values
Host key fingerprint string False

Disable Connection Cache

Parameters

Name Description Type Required Allowed Values
Disable Connection Cache bool False

Actions

Copy file

Copy a file from the source file path to the destination file path.

Create folder

Create a folder using the specified folder path.

Delete file

Delete the file using the specified file path.

Delete folder (Preview)

Delete the folder using the specified path. Use optional input 'Recursive delete' to delete a non-empty folder along with all its contents.

Extract archive

Extract an archive file inside the specified folder. Only ZIP archives are supported.

Get file content

Get the full file content, provided that the file size doesn't exceed the limit of '209715200' bytes. For larger files, use the 'Get file content (V2)' action.

Get file content (V2)

Get the content from the specified file. By default, the file size limit is '2147483648' bytes.

Get file or directory metadata

Get the metadata for a file or a directory in the specified path.

List folder

List the files and folders present in the given folder with their metadata. To exclude subfolders in the action output, use the optional input parameter 'List files only'.

Rename file

Change the name of the specified file. The renamed file stays in the same directory.

Upload file content

Upload the specified content to a file in the specified file path. To create an empty file, ignore the optional input parameter named 'File content'.

Copy file

Copy a file from the source file path to the destination file path.

Parameters

Name Key Required Type Description
Source file path
sourceFilePath True string

The file path for the file to copy, relative to the root directory.

Destination file path
destinationFilePath True string

The destination file path, relative to the root directory.

Overwrite destination file
overWriteFileIfExists string

If the destination file exists, overwrite that file.

Returns

Name Path Type Description
Name of file or directory
name string

The name for the file or directory.

Absolute file path
absolutePath string

The absolute path for the file.

Path relative to root directory
pathRelativeToRootDirectory string

The path relative to the root directory for the SFTP server.

File size in bytes
fileSize string

The uploaded file size in bytes.

Media Type
mediaType string

Type of media.

Last access time
lastAccessTime string

The time when the file was last accessed.

Last updated time
lastModifiedTime string

The time when the file was last updated.

Is the item a directory
isDirectory string

When this value is 'True', the item is a directory.

Read permission
readPermission string

A value that indicates whether you have read permissions on this file or folder.

Write permission
writePermission string

A value that indicates whether you have write permissions on this file or folder.

Execute permission
executePermission string

A value that indicates whether you have execute permissions on this file or folder.

Create folder

Create a folder using the specified folder path.

Parameters

Name Key Required Type Description
Folder path
folderPath True string

The path for the folder to create. This path must be relative to the root directory.

Returns

Name Path Type Description
Name of file or directory
name string

The name for the file or directory.

Absolute file path
absolutePath string

The absolute path for the file.

Path relative to root directory
pathRelativeToRootDirectory string

The path relative to the root directory for the SFTP server.

File size in bytes
fileSize string

The uploaded file size in bytes.

Media Type
mediaType string

Type of media.

Last access time
lastAccessTime string

The time when the file was last accessed.

Last updated time
lastModifiedTime string

The time when the file was last updated.

Is the item a directory
isDirectory string

When this value is 'True', the item is a directory.

Read permission
readPermission string

A value that indicates whether you have read permissions on this file or folder.

Write permission
writePermission string

A value that indicates whether you have write permissions on this file or folder.

Execute permission
executePermission string

A value that indicates whether you have execute permissions on this file or folder.

Delete file

Delete the file using the specified file path.

Parameters

Name Key Required Type Description
File path
filePath True string

The file path with the file extension if any, relative to the root directory.

Skip deletion if file doesn't exist
skipDelete string

If file doesn't exist, deletion is skipped, and this action won't fail.

Returns

Name Path Type Description
File deleted or not
fileDeleted string

When this value is 'True', the file was deleted.

Delete folder (Preview)

Delete the folder using the specified path. Use optional input 'Recursive delete' to delete a non-empty folder along with all its contents.

Parameters

Name Key Required Type Description
Folder path
folderPath True string

The folder path relative to the root directory.

Recursively delete contents
recursiveDelete string

This action will delete all files and subfolders in the given folder when this input is set to 'True'. Otherwise if the folder is non-empty, the action will fail.

Extract archive

Extract an archive file inside the specified folder. Only ZIP archives are supported.

Parameters

Name Key Required Type Description
File path
filePath string

The relative path to the archive file. The file name must have a .zip extension.

Folder path
folderPath True string

The folder path where to extract the files, relative to the root directory.

Overwrite existing files behaviour
overwriteExistingFilesBehaviour string

The input determines the behaviour when dealing with files having same path as the archive already exist on the file server.

File content
content string

The relative path to the archive file. The file name must have a .zip extension.

Returns

The list containing the metadata for all the extracted files.

Extract archive output body
array

Get file content

Get the full file content, provided that the file size doesn't exceed the limit of '209715200' bytes. For larger files, use the 'Get file content (V2)' action.

Parameters

Name Key Required Type Description
File path
filePath True string

The file path with the file extension if any, relative to the root directory.

Infer Content Type
inferContentType string

Infer content-type based on extension

Returns

Name Path Type Description
File name
fileName string

The file name.

Content of the specified file
content string

The file content.

Get file content (V2)

Get the content from the specified file. By default, the file size limit is '2147483648' bytes.

Parameters

Name Key Required Type Description
File path
filePath True string

The file path with the file extension if any, relative to the root directory.

Infer Content Type
inferContentType string

Infer content-type based on extension

Returns

The content from the file provided as input.

Output body from the 'Get file content (V2)' action
string

Get file or directory metadata

Get the metadata for a file or a directory in the specified path.

Parameters

Name Key Required Type Description
File or folder path
fileOrFolderPath True string

The file or folder path, relative to the root directory.

List folder

List the files and folders present in the given folder with their metadata. To exclude subfolders in the action output, use the optional input parameter 'List files only'.

Parameters

Name Key Required Type Description
Folder path
folderPath True string

The path to the folder that's to be listed relative to the root directory.

List only the files
filesOnly string

When this parameter is set to 'True', only the files in the specified folder are listed. Subfolders are excluded.

Returns

The body of the 'List folder' action.

List folder output body
array

Rename file

Change the name of the specified file. The renamed file stays in the same directory.

Parameters

Name Key Required Type Description
File path
filePath True string

The file path with the file extension if any, relative to the root directory.

New name
newFileName True string

The new name for the file. This value must be only the name, not the path.

Get metadata for renamed file
fetchMetadata string

When this value is 'True', return the metadata of the renamed file in this action's output.

Returns

Name Path Type Description
Name of file or directory
name string

The name for the file or directory.

Absolute file path
absolutePath string

The absolute path for the file.

Path relative to root directory
pathRelativeToRootDirectory string

The path relative to the root directory for the SFTP server.

File size in bytes
fileSize string

The uploaded file size in bytes.

Media Type
mediaType string

Type of media.

Last access time
lastAccessTime string

The time when the file was last accessed.

Last updated time
lastModifiedTime string

The time when the file was last updated.

Is the item a directory
isDirectory string

When this value is 'True', the item is a directory.

Read permission
readPermission string

A value that indicates whether you have read permissions on this file or folder.

Write permission
writePermission string

A value that indicates whether you have write permissions on this file or folder.

Execute permission
executePermission string

A value that indicates whether you have execute permissions on this file or folder.

Upload file content

Upload the specified content to a file in the specified file path. To create an empty file, ignore the optional input parameter named 'File content'.

Parameters

Name Key Required Type Description
File path
filePath True string

The file path with the file extension if any, relative to the root directory.

File content
content string

The file content to upload.

Overwrite existing files
overWriteFileIfExists True string

When this value is 'True', overwrite the file, if already existing.

Returns

Name Path Type Description
Absolute file path
filePath string

The absolute path for the uploaded file.

File size in bytes
size string

The uploaded file size in bytes.

File name
filename string

The file name.

Path relative to root directory
pathRelativeToRootDirectory string

The path relative to the root directory for the SFTP server.

Triggers

When a file is added or updated

This trigger fires when a new file is added or an existing file is updated in the monitored folder. The trigger gets only one file per run. If multiple files exist, the trigger gets these files using multiple runs.

When files are added or updated

This trigger fires when one or multiple new files are added or updated in the monitored folder. If multiple files exist, the trigger gets all the files in a single run. To process files one at a time, enable the trigger's 'splitOn' property.

When a file is added or updated

This trigger fires when a new file is added or an existing file is updated in the monitored folder. The trigger gets only one file per run. If multiple files exist, the trigger gets these files using multiple runs.

Parameters

Name Key Required Type Description
Folder path
folderPath True string

The folder path relative to the root directory.

Include file content
includeFileContent string

If this value is 'True', get the file content along with the file name and properties.

Old files cutoff timestamp
oldFilesCutoffTimestamp string

Ignore files that are older than the specified cutoff timestamp. Use the format 'YYYY-MM-DDTHH:MM:SS'. To disable this option, ignore this parameter.

File name extensions to ignore
ignoreFileExtensions string

Ignore files that have any of the specified file name extensions. Don't prefix extensions with the period ('.') separator.

Returns

Name Path Type Description
File content
content string

The file content.

fileMetadata
fileMetadata string

When files are added or updated

This trigger fires when one or multiple new files are added or updated in the monitored folder. If multiple files exist, the trigger gets all the files in a single run. To process files one at a time, enable the trigger's 'splitOn' property.

Parameters

Name Key Required Type Description
Folder path
folderPath True string

The folder path relative to the root directory.

Include file content
includeFileContent string

If this value is 'True', get the file content along with the file name and properties.

Maximum file count
maxFileCount string

The maximum number of files to include in a single trigger run. If you don't want this limit, ignore this parameter.

Old files cutoff timestamp
oldFilesCutoffTimestamp string

Ignore files that are older than the specified cutoff timestamp. Use the format 'YYYY-MM-DDTHH:MM:SS'. To disable this option, ignore this parameter.

File name extensions to ignore
ignoreFileExtensions string

Ignore files that have any of the specified file name extensions. Don't prefix extensions with the period ('.') separator.

Returns

The files that were added or updated.

Files added or updated
array