SafeHandle Třída

Definice

Představuje třídu obálky pro popisovače operačního systému. Tato třída musí být zděděna.

public ref class SafeHandle abstract : IDisposable
public ref class SafeHandle abstract : System::Runtime::ConstrainedExecution::CriticalFinalizerObject, IDisposable
[System.Security.SecurityCritical]
public abstract class SafeHandle : IDisposable
public abstract class SafeHandle : System.Runtime.ConstrainedExecution.CriticalFinalizerObject, IDisposable
[System.Security.SecurityCritical]
public abstract class SafeHandle : System.Runtime.ConstrainedExecution.CriticalFinalizerObject, IDisposable
[<System.Security.SecurityCritical>]
type SafeHandle = class
    interface IDisposable
type SafeHandle = class
    inherit CriticalFinalizerObject
    interface IDisposable
[<System.Security.SecurityCritical>]
type SafeHandle = class
    inherit CriticalFinalizerObject
    interface IDisposable
Public MustInherit Class SafeHandle
Implements IDisposable
Public MustInherit Class SafeHandle
Inherits CriticalFinalizerObject
Implements IDisposable
Dědičnost
SafeHandle
Dědičnost
Odvozené
Atributy
Implementuje

Příklady

Následující příklad kódu vytvoří vlastní bezpečný popisovač pro popisovač souboru operačního systému odvozený z SafeHandleZeroOrMinusOneIsInvalid. Čte bajty ze souboru a zobrazuje jejich šestnáctkové hodnoty. Obsahuje také testovací sadu chyb, která způsobí přerušení vlákna, ale hodnota popisovače je uvolněna. Při použití objektu IntPtr k reprezentaci popisovačů dochází k občasným únikům popisovače kvůli přerušení asynchronního vlákna.

Budete potřebovat textový soubor ve stejné složce jako zkompilovaná aplikace. Za předpokladu, že aplikaci pojmenujete HexViewer, je použití příkazového řádku následující:

HexViewer <filename> -Fault

Volitelně můžete určit -Fault , že se chcete záměrně pokusit o únik popisovač přerušením vlákna v určitém okně. Pomocí nástroje Windows Perfmon.exe můžete monitorovat počty při vkládání chyb.

using System;
using System.Runtime.InteropServices;
using System.IO;
using System.ComponentModel;
using System.Security;
using System.Threading;
using Microsoft.Win32.SafeHandles;
using System.Runtime.ConstrainedExecution;
using System.Security.Permissions;

namespace SafeHandleDemo
{
    internal class MySafeFileHandle : SafeHandleZeroOrMinusOneIsInvalid
    {
        // Create a SafeHandle, informing the base class
        // that this SafeHandle instance "owns" the handle,
        // and therefore SafeHandle should call
        // our ReleaseHandle method when the SafeHandle
        // is no longer in use.
        private MySafeFileHandle()
            : base(true)
        {
        }
        [ReliabilityContract(Consistency.WillNotCorruptState, Cer.MayFail)]
        override protected bool ReleaseHandle()
        {
            // Here, we must obey all rules for constrained execution regions.
            return NativeMethods.CloseHandle(handle);
            // If ReleaseHandle failed, it can be reported via the
            // "releaseHandleFailed" managed debugging assistant (MDA).  This
            // MDA is disabled by default, but can be enabled in a debugger
            // or during testing to diagnose handle corruption problems.
            // We do not throw an exception because most code could not recover
            // from the problem.
        }
    }

    [SuppressUnmanagedCodeSecurity()]
    internal static class NativeMethods
    {
        // Win32 constants for accessing files.
        internal const int GENERIC_READ = unchecked((int)0x80000000);

        // Allocate a file object in the kernel, then return a handle to it.
        [DllImport("kernel32", SetLastError = true, CharSet = CharSet.Unicode)]
        internal extern static MySafeFileHandle CreateFile(String fileName,
           int dwDesiredAccess, System.IO.FileShare dwShareMode,
           IntPtr securityAttrs_MustBeZero, System.IO.FileMode dwCreationDisposition,
           int dwFlagsAndAttributes, IntPtr hTemplateFile_MustBeZero);

        // Use the file handle.
        [DllImport("kernel32", SetLastError = true)]
        internal extern static int ReadFile(MySafeFileHandle handle, byte[] bytes,
           int numBytesToRead, out int numBytesRead, IntPtr overlapped_MustBeZero);

        // Free the kernel's file object (close the file).
        [DllImport("kernel32", SetLastError = true)]
        [ReliabilityContract(Consistency.WillNotCorruptState, Cer.MayFail)]
        internal extern static bool CloseHandle(IntPtr handle);
    }

    // The MyFileReader class is a sample class that accesses an operating system
    // resource and implements IDisposable. This is useful to show the types of
    // transformation required to make your resource wrapping classes
    // more resilient. Note the Dispose and Finalize implementations.
    // Consider this a simulation of System.IO.FileStream.
    public class MyFileReader : IDisposable
    {
        // _handle is set to null to indicate disposal of this instance.
        private MySafeFileHandle _handle;

        public MyFileReader(String fileName)
        {
            // Security permission check.
            String fullPath = Path.GetFullPath(fileName);
            new FileIOPermission(FileIOPermissionAccess.Read, fullPath).Demand();

            // Open a file, and save its handle in _handle.
            // Note that the most optimized code turns into two processor
            // instructions: 1) a call, and 2) moving the return value into
            // the _handle field.  With SafeHandle, the CLR's platform invoke
            // marshaling layer will store the handle into the SafeHandle
            // object in an atomic fashion. There is still the problem
            // that the SafeHandle object may not be stored in _handle, but
            // the real operating system handle value has been safely stored
            // in a critical finalizable object, ensuring against leaking
            // the handle even if there is an asynchronous exception.

            MySafeFileHandle tmpHandle;
            tmpHandle = NativeMethods.CreateFile(fileName, NativeMethods.GENERIC_READ,
                FileShare.Read, IntPtr.Zero, FileMode.Open, 0, IntPtr.Zero);

            // An async exception here will cause us to run our finalizer with
            // a null _handle, but MySafeFileHandle's ReleaseHandle code will
            // be invoked to free the handle.

            // This call to Sleep, run from the fault injection code in Main,
            // will help trigger a race. But it will not cause a handle leak
            // because the handle is already stored in a SafeHandle instance.
            // Critical finalization then guarantees that freeing the handle,
            // even during an unexpected AppDomain unload.
            Thread.Sleep(500);
            _handle = tmpHandle;  // Makes _handle point to a critical finalizable object.

            // Determine if file is opened successfully.
            if (_handle.IsInvalid)
                throw new Win32Exception(Marshal.GetLastWin32Error(), fileName);
        }

        public void Dispose()  // Follow the Dispose pattern - public nonvirtual.
        {
            Dispose(disposing: true);
            GC.SuppressFinalize(this);
        }

        // No finalizer is needed. The finalizer on SafeHandle
        // will clean up the MySafeFileHandle instance,
        // if it hasn't already been disposed.
        // However, there may be a need for a subclass to
        // introduce a finalizer, so Dispose is properly implemented here.
        protected virtual void Dispose(bool disposing)
        {
            // Note there are three interesting states here:
            // 1) CreateFile failed, _handle contains an invalid handle
            // 2) We called Dispose already, _handle is closed.
            // 3) _handle is null, due to an async exception before
            //    calling CreateFile. Note that the finalizer runs
            //    if the constructor fails.
            if (_handle != null && !_handle.IsInvalid)
            {
                // Free the handle
                _handle.Dispose();
            }
            // SafeHandle records the fact that we've called Dispose.
        }

        public byte[] ReadContents(int length)
        {
            if (_handle.IsInvalid)  // Is the handle disposed?
                throw new ObjectDisposedException("FileReader is closed");

            // This sample code will not work for all files.
            byte[] bytes = new byte[length];
            int numRead = 0;
            int r = NativeMethods.ReadFile(_handle, bytes, length, out numRead, IntPtr.Zero);
            // Since we removed MyFileReader's finalizer, we no longer need to
            // call GC.KeepAlive here.  Platform invoke will keep the SafeHandle
            // instance alive for the duration of the call.
            if (r == 0)
                throw new Win32Exception(Marshal.GetLastWin32Error());
            if (numRead < length)
            {
                byte[] newBytes = new byte[numRead];
                Array.Copy(bytes, newBytes, numRead);
                bytes = newBytes;
            }
            return bytes;
        }
    }

    static class Program
    {
        // Testing harness that injects faults.
        private static bool _printToConsole = false;
        private static bool _workerStarted = false;

        private static void Usage()
        {
            Console.WriteLine("Usage:");
            // Assumes that application is named HexViewer"
            Console.WriteLine("HexViewer <fileName> [-fault]");
            Console.WriteLine(" -fault Runs hex viewer repeatedly, injecting faults.");
        }

        private static void ViewInHex(Object fileName)
        {
            _workerStarted = true;
            byte[] bytes;
            using (MyFileReader reader = new MyFileReader((String)fileName))
            {
                bytes = reader.ReadContents(20);
            }  // Using block calls Dispose() for us here.

            if (_printToConsole)
            {
                // Print up to 20 bytes.
                int printNBytes = Math.Min(20, bytes.Length);
                Console.WriteLine("First {0} bytes of {1} in hex", printNBytes, fileName);
                for (int i = 0; i < printNBytes; i++)
                    Console.Write("{0:x} ", bytes[i]);
                Console.WriteLine();
            }
        }

        static void Main(string[] args)
        {
            if (args.Length == 0 || args.Length > 2 ||
                args[0] == "-?" || args[0] == "/?")
            {
                Usage();
                return;
            }

            String fileName = args[0];
            bool injectFaultMode = args.Length > 1;
            if (!injectFaultMode)
            {
                _printToConsole = true;
                ViewInHex(fileName);
            }
            else
            {
                Console.WriteLine("Injecting faults - watch handle count in perfmon (press Ctrl-C when done)");
                int numIterations = 0;
                while (true)
                {
                    _workerStarted = false;
                    Thread t = new Thread(new ParameterizedThreadStart(ViewInHex));
                    t.Start(fileName);
                    Thread.Sleep(1);
                    while (!_workerStarted)
                    {
                        Thread.Sleep(0);
                    }
                    t.Abort();  // Normal applications should not do this.
                    numIterations++;
                    if (numIterations % 10 == 0)
                        GC.Collect();
                    if (numIterations % 10000 == 0)
                        Console.WriteLine(numIterations);
                }
            }
        }
    }
}

Poznámky

Další informace o tomto rozhraní API najdete v tématu Doplňkové poznámky k rozhraní API pro SafeHandle.

Poznámky pro implementátory

Chcete-li vytvořit třídu odvozenou z SafeHandle, musíte vědět, jak vytvořit a uvolnit popisovač operačního systému. Tento proces se u různých typů popisovačů liší, protože některé používají funkci [CloseHandle](/windows/win32/api/handleapi/nf-handleapi-closehandle). zatímco jiné používají konkrétnější funkce, jako je [UnmapViewOfFile](/windows/win32/api/memoryapi/nf-memoryapi-unmapviewoffile) nebo [FindClose](/windows/win32/api/fileapi/nf-fileapi-findclose). Z tohoto důvodu musíte vytvořit odvozenou třídu pro každý typ popisovače operačního SafeHandle systému, který chcete zabalit do bezpečného úchytu.

Pokud dědíte z SafeHandle, musíte přepsat následující členy: IsInvalid a ReleaseHandle().

Měli byste také poskytnout veřejný konstruktor bez parametrů, který volá základní konstruktor s hodnotou, která představuje neplatnou hodnotu popisovače, a Boolean hodnotu určující, zda je nativní popisovač vlastněný SafeHandle a v důsledku toho by měl být uvolněn, když SafeHandle byl odstraněn.

Konstruktory

SafeHandle(IntPtr, Boolean)

Inicializuje novou instanci SafeHandle třídy se zadanou neplatnou hodnotou popisovače.

Pole

handle

Určuje popisovač, který se má zabalit.

Vlastnosti

IsClosed

Získá hodnotu označující, zda je popisovač uzavřen.

IsInvalid

Při přepsání v odvozené třídě získá hodnotu označující, zda je hodnota popisovače neplatná.

Metody

Close()

Označí popisovač pro uvolnění a uvolnění prostředků.

DangerousAddRef(Boolean)

Ručně zvýší čítač odkazů na SafeHandle instance.

DangerousGetHandle()

Vrátí hodnotu handle pole.

DangerousRelease()

Ručně sníží čítač odkazů na SafeHandle instanci.

Dispose()

Uvolní všechny prostředky používané SafeHandle třídou.

Dispose(Boolean)

Uvolní nespravované prostředky používané SafeHandle třídou určující, zda se má provést normální operace dispose.

Equals(Object)

Určí, zda se zadaný objekt rovná aktuálnímu objektu.

(Zděděno od Object)
Finalize()

Uvolní všechny prostředky přidružené k popisovači.

GetHashCode()

Slouží jako výchozí hashovací funkce.

(Zděděno od Object)
GetType()

Získá aktuální Type instanci.

(Zděděno od Object)
MemberwiseClone()

Vytvoří mělkou kopii aktuálního Objectsouboru .

(Zděděno od Object)
ReleaseHandle()

Při přepsání v odvozené třídě spustí kód potřebný k uvolnění popisovače.

SetHandle(IntPtr)

Nastaví popisovač na zadaný již existující popisovač.

SetHandleAsInvalid()

Označí úchyt jako nepoužívaný.

ToString()

Vrátí řetězec, který představuje aktuální objekt.

(Zděděno od Object)

Platí pro

Viz také