Upravit

Sdílet prostřednictvím

Add-CMTaskSequenceStep

  • Reference
Module:
ConfigurationManager

Add a step or group to a task sequence.

Syntax

Add-CMTaskSequenceStep
   [-InsertStepStartIndex <UInt32>]
   -Step <IResultObject[]>
   -InputObject <IResultObject>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Add-CMTaskSequenceStep
   [-InsertStepStartIndex <UInt32>]
   -Step <IResultObject[]>
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Add-CMTaskSequenceStep
   [-InsertStepStartIndex <UInt32>]
   -Step <IResultObject[]>
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

Use this cmdlet to add a group or step to an existing task sequence. For more information about task sequences steps, see Task sequence steps.

When programmatically adding steps to a task sequence, it's important to understand the index order of steps. To help visualize the index, this article uses the following example task sequence:

  • step1
  • step2
  • step3
  • step4
  • group5
    • step5.1
    • step5.2
    • step5.3
    • group5.4
      • step5.4.1
    • step5.5
  • step6

When you use the task sequence editor to add a step, the new step is added after the currently selected step. This cmdlet works similarly, it adds the step after the specified index. You use the InsertStepStartIndex parameter to specify the step index.

This cmdlet can only add steps to the main level of the task sequence, not in groups. To add steps in groups, use Set-CMTaskSequenceGroup. For example, with the sample task sequence, if you use Add-CMTaskSequenceStep with the InsertStepStartIndex parameter value 5, the cmdlet adds the new step after group5 and before step6.

Note

Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.

Examples

Example 1: Create a custom task sequence that runs two PowerShell scripts

In this example, the first two commands use the New-CMTaskSequenceStepRunPowerShellScript cmdlet to create step objects for the Run Powershell Script step. The third command creates a new custom task sequence named Run scripts. The fourth command passes the new task sequence object through the pipeline to Add-CMTaskSequenceStep, which adds the two steps.

$step1 = New-CMTaskSequenceStepRunPowerShellScript -Name "Run script 1" -PackageID $PackageId -ScriptName "script1.ps1" -ExecutionPolicy Bypass
$step2 = New-CMTaskSequenceStepRunPowerShellScript -Name "Run script 2" -PackageID $PackageId -ScriptName "script2.ps1" -ExecutionPolicy Bypass
$ts = New-CMTaskSequence -Name "Run scripts" -CustomTaskSequence
$ts | Add-CMTaskSequenceStep -Step ($step1, $step2)

The resulting task sequence looks like the following list:

  • Run script 1
  • Run script 2

The steps are ordered this way because of how they're ordered in the Step parameter.

Example 2: Create a custom task sequence that runs two PowerShell scripts with a different order

This example is similar to Example 1, except it uses two instances of the Add-CMTaskSequenceStep cmdlet.

$step1 = New-CMTaskSequenceStepRunPowerShellScript -Name "Run script 1" -PackageID $PackageId -ScriptName "script1.ps1" -ExecutionPolicy Bypass
$step2 = New-CMTaskSequenceStepRunPowerShellScript -Name "Run script 2" -PackageID $PackageId -ScriptName "script2.ps1" -ExecutionPolicy Bypass
$ts = New-CMTaskSequence -Name "Run scripts" -CustomTaskSequence
$ts | Add-CMTaskSequenceStep -Step $step1
$ts | Add-CMTaskSequenceStep -Step $step2

The resulting task sequence looks like the following list:

  • Run script 2
  • Run script 1

Because of how each instance of Add-CMTaskSequenceStep is ordered, and neither uses the InsertStepStartIndex parameter, by default they use index 0. So the cmdlet adds the second step before the first step.

Example 3: Add a step at a specific index

This example first uses the New-CMTSStepSetVariable cmdlet to create a step object for the Set Task Sequence Variable step. It then adds this step to the task sequence named ts1 after the step at index 2. Using the example task sequence in the Description, this command adds newStep in between step2 and step3.

$step = New-CMTSStepSetVariable -name "newStep" -TaskSequenceVariable "testVar" -TaskSequenceVariableValue "testValue"
Add-CMTaskSequenceStep -TaskSequenceName "ts1" -Step $step -InsertStepStartIndex 2

Example 4: Copy a task sequence and add a new step

This example copies an existing task sequence, and then renames it. The next set of steps reconfigures the security scope. It then gets the ID for a package, and copies a condition object from another step. In the last group, it creates a new Run Command Line step that uses the package and condition objects. It then adds the new step to the new task sequence at index 11.

$ts = Copy-CMTaskSequence -Name "Deploy Windows 10 (v1)"
$ts | Set-CMTaskSequence -NewName "Deploy Windows 10 (v2)"

$ts | Add-CMObjectSecurityScope -Name "Contoso main" | Out-Null
$ts | Remove-CMObjectSecurityScope -Name "Default" -Force |Out-Null

$pkgId = (Get-CMPackage -Name "Widget tool" -Fast).PackageID
$condition = ($ts | Get-CMTaskSequenceStep -StepName "Restart in Windows PE").Condition.Operands

$step = New-CMTaskSequenceStepRunCommandLine -CommandLine "widget.exe /q" -PackageId $pkgId -Name "Install Widget in Windows PE" -Condition $condition
$ts | Add-CMTaskSequenceStep -Step $step -InsertStepStartIndex 11

Parameters

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DisableWildcardHandling

This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ForceWildcardHandling

This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InputObject

Specify a task sequence object to which the cmdlet adds the step. To get this object, use the Get-CMTaskSequence, Copy-CMTaskSequence, or New-CMTaskSequence cmdlets.

Type:IResultObject
Aliases:TaskSequence
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-InsertStepStartIndex

Specify an integer value for the task sequence index. The cmdlet adds the new step after this specified index. For example, using the example task sequence in the Description, if you specify a value of 4, the cmdlet adds the new step after step4.

If you specify a value of 0, the cmdlet adds the new step at the top of the task sequence. This behavior is the default if you don't specify this parameter. For example, the cmdlet adds the new step before step1.

There's no maximum value. If you specify a value that's greater than the last step's index, the cmdlet adds the new step at the end of the task sequence. For example, if you specify a value of 10, the cmdlet adds the new step after step6.

Type:UInt32
Aliases:InsertStepsStartIndex
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Step

Specify one or more step objects to add to the task sequence. To get this object, use one of the New-CMTSStep* cmdlets. For example, Get-CMTSStepApplyDataImage.

Type:IResultObject[]
Aliases:Steps
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-TaskSequenceId

Specify the ID of a task sequence to which the cmdlet adds the step. This ID is the task sequence package ID, for example XYZ00861.

Type:String
Aliases:Id, TaskSequencePackageId
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-TaskSequenceName

Specify the name of a task sequence to which the cmdlet adds the step.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet doesn't run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

Microsoft.ConfigurationManagement.ManagementProvider.IResultObject

Outputs

System.Object

Notes

While not listed in the related links section, you can use the Get-CMTSStep*, New-CMTSStep*, Remove-CMTSStep*, and Set-CMTSStep* cmdlets. For example:

There's a set of these cmdlets for each task sequence step.