Add-CMMsiDeploymentType
Add a Windows Installer deployment type.
Syntax
Add-CMMsiDeploymentType
-ApplicationName <String>
[-CacheContent]
[-ContentFallback]
-ContentLocation <String>
[-DeploymentTypeName <String>]
[-EnableBranchCache]
[-EstimatedRuntimeMins <Int32>]
[-Force32Bit]
[-InstallationBehaviorType <InstallationBehaviorType>]
[-InstallCommand <String>]
[-InstallWorkingDirectory <String>]
[-LogonRequirementType <LogonRequirementType>]
[-MaximumRuntimeMins <Int32>]
[-ProductCode <String>]
[-RebootBehavior <PostExecutionBehavior>]
[-RepairCommand <String>]
[-RepairWorkingDirectory <String>]
[-RequireUserInteraction]
[-SlowNetworkDeploymentMode <ContentHandlingMode>]
[-SourceUpdateProductCode <String>]
[-UninstallCommand <String>]
[-UninstallContentLocation <String>]
[-UninstallOption <UninstallContentSetting>]
[-UninstallWorkingDirectory <String>]
[-UserInteractionMode <UserInteractionMode>]
[-AddRequirement <Rule[]>]
[-RemoveLanguage <String[]>]
[-RemoveRequirement <Rule[]>]
[-AddLanguage <String[]>]
[-Comment <String>]
[-Force]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Add-CMMsiDeploymentType
-AddDetectionClause <DetectionClause[]>
-ApplicationId <Int32>
[-CacheContent]
[-ContentFallback]
[-ContentLocation <String>]
-DeploymentTypeName <String>
[-DetectionClauseConnector <Hashtable[]>]
[-EnableBranchCache]
[-EstimatedRuntimeMins <Int32>]
[-Force32Bit]
[-GroupDetectionClauses <String[]>]
[-InstallationBehaviorType <InstallationBehaviorType>]
-InstallCommand <String>
[-InstallWorkingDirectory <String>]
[-LogonRequirementType <LogonRequirementType>]
[-MaximumRuntimeMins <Int32>]
[-RebootBehavior <PostExecutionBehavior>]
[-RepairCommand <String>]
[-RepairWorkingDirectory <String>]
[-RequireUserInteraction]
[-SlowNetworkDeploymentMode <ContentHandlingMode>]
[-SourceUpdateProductCode <String>]
[-UninstallCommand <String>]
[-UninstallContentLocation <String>]
[-UninstallOption <UninstallContentSetting>]
[-UninstallWorkingDirectory <String>]
[-UserInteractionMode <UserInteractionMode>]
[-AddRequirement <Rule[]>]
[-RemoveLanguage <String[]>]
[-RemoveRequirement <Rule[]>]
[-AddLanguage <String[]>]
[-Comment <String>]
[-Force]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Add-CMMsiDeploymentType
-AddDetectionClause <DetectionClause[]>
-ApplicationName <String>
[-CacheContent]
[-ContentFallback]
[-ContentLocation <String>]
-DeploymentTypeName <String>
[-DetectionClauseConnector <Hashtable[]>]
[-EnableBranchCache]
[-EstimatedRuntimeMins <Int32>]
[-Force32Bit]
[-GroupDetectionClauses <String[]>]
[-InstallationBehaviorType <InstallationBehaviorType>]
-InstallCommand <String>
[-InstallWorkingDirectory <String>]
[-LogonRequirementType <LogonRequirementType>]
[-MaximumRuntimeMins <Int32>]
[-RebootBehavior <PostExecutionBehavior>]
[-RepairCommand <String>]
[-RepairWorkingDirectory <String>]
[-RequireUserInteraction]
[-SlowNetworkDeploymentMode <ContentHandlingMode>]
[-SourceUpdateProductCode <String>]
[-UninstallCommand <String>]
[-UninstallContentLocation <String>]
[-UninstallOption <UninstallContentSetting>]
[-UninstallWorkingDirectory <String>]
[-UserInteractionMode <UserInteractionMode>]
[-AddRequirement <Rule[]>]
[-RemoveLanguage <String[]>]
[-RemoveRequirement <Rule[]>]
[-AddLanguage <String[]>]
[-Comment <String>]
[-Force]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Add-CMMsiDeploymentType
-AddDetectionClause <DetectionClause[]>
[-CacheContent]
[-ContentFallback]
[-ContentLocation <String>]
-DeploymentTypeName <String>
[-DetectionClauseConnector <Hashtable[]>]
[-EnableBranchCache]
[-EstimatedRuntimeMins <Int32>]
[-Force32Bit]
[-GroupDetectionClauses <String[]>]
-InputObject <IResultObject>
[-InstallationBehaviorType <InstallationBehaviorType>]
-InstallCommand <String>
[-InstallWorkingDirectory <String>]
[-LogonRequirementType <LogonRequirementType>]
[-MaximumRuntimeMins <Int32>]
[-RebootBehavior <PostExecutionBehavior>]
[-RepairCommand <String>]
[-RepairWorkingDirectory <String>]
[-RequireUserInteraction]
[-SlowNetworkDeploymentMode <ContentHandlingMode>]
[-SourceUpdateProductCode <String>]
[-UninstallCommand <String>]
[-UninstallContentLocation <String>]
[-UninstallOption <UninstallContentSetting>]
[-UninstallWorkingDirectory <String>]
[-UserInteractionMode <UserInteractionMode>]
[-AddRequirement <Rule[]>]
[-RemoveLanguage <String[]>]
[-RemoveRequirement <Rule[]>]
[-AddLanguage <String[]>]
[-Comment <String>]
[-Force]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Add-CMMsiDeploymentType
-ApplicationId <Int32>
[-CacheContent]
[-ContentFallback]
[-ContentLocation <String>]
-DeploymentTypeName <String>
[-EnableBranchCache]
[-EstimatedRuntimeMins <Int32>]
[-Force32Bit]
[-ForceScriptDetection32Bit]
[-InstallationBehaviorType <InstallationBehaviorType>]
-InstallCommand <String>
[-InstallWorkingDirectory <String>]
[-LogonRequirementType <LogonRequirementType>]
[-MaximumRuntimeMins <Int32>]
[-RebootBehavior <PostExecutionBehavior>]
[-RepairCommand <String>]
[-RepairWorkingDirectory <String>]
[-RequireUserInteraction]
[-ScriptFile <String>]
-ScriptLanguage <ScriptLanguage>
[-ScriptText <String>]
[-SlowNetworkDeploymentMode <ContentHandlingMode>]
[-SourceUpdateProductCode <String>]
[-UninstallCommand <String>]
[-UninstallContentLocation <String>]
[-UninstallOption <UninstallContentSetting>]
[-UninstallWorkingDirectory <String>]
[-UserInteractionMode <UserInteractionMode>]
[-AddRequirement <Rule[]>]
[-RemoveLanguage <String[]>]
[-RemoveRequirement <Rule[]>]
[-AddLanguage <String[]>]
[-Comment <String>]
[-Force]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Add-CMMsiDeploymentType
-ApplicationId <Int32>
[-CacheContent]
[-ContentFallback]
-ContentLocation <String>
[-DeploymentTypeName <String>]
[-EnableBranchCache]
[-EstimatedRuntimeMins <Int32>]
[-Force32Bit]
[-InstallationBehaviorType <InstallationBehaviorType>]
[-InstallCommand <String>]
[-InstallWorkingDirectory <String>]
[-LogonRequirementType <LogonRequirementType>]
[-MaximumRuntimeMins <Int32>]
[-ProductCode <String>]
[-RebootBehavior <PostExecutionBehavior>]
[-RepairCommand <String>]
[-RepairWorkingDirectory <String>]
[-RequireUserInteraction]
[-SlowNetworkDeploymentMode <ContentHandlingMode>]
[-SourceUpdateProductCode <String>]
[-UninstallCommand <String>]
[-UninstallContentLocation <String>]
[-UninstallOption <UninstallContentSetting>]
[-UninstallWorkingDirectory <String>]
[-UserInteractionMode <UserInteractionMode>]
[-AddRequirement <Rule[]>]
[-RemoveLanguage <String[]>]
[-RemoveRequirement <Rule[]>]
[-AddLanguage <String[]>]
[-Comment <String>]
[-Force]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Add-CMMsiDeploymentType
-ApplicationName <String>
[-CacheContent]
[-ContentFallback]
[-ContentLocation <String>]
-DeploymentTypeName <String>
[-EnableBranchCache]
[-EstimatedRuntimeMins <Int32>]
[-Force32Bit]
[-ForceScriptDetection32Bit]
[-InstallationBehaviorType <InstallationBehaviorType>]
-InstallCommand <String>
[-InstallWorkingDirectory <String>]
[-LogonRequirementType <LogonRequirementType>]
[-MaximumRuntimeMins <Int32>]
[-RebootBehavior <PostExecutionBehavior>]
[-RepairCommand <String>]
[-RepairWorkingDirectory <String>]
[-RequireUserInteraction]
[-ScriptFile <String>]
-ScriptLanguage <ScriptLanguage>
[-ScriptText <String>]
[-SlowNetworkDeploymentMode <ContentHandlingMode>]
[-SourceUpdateProductCode <String>]
[-UninstallCommand <String>]
[-UninstallContentLocation <String>]
[-UninstallOption <UninstallContentSetting>]
[-UninstallWorkingDirectory <String>]
[-UserInteractionMode <UserInteractionMode>]
[-AddRequirement <Rule[]>]
[-RemoveLanguage <String[]>]
[-RemoveRequirement <Rule[]>]
[-AddLanguage <String[]>]
[-Comment <String>]
[-Force]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Add-CMMsiDeploymentType
[-CacheContent]
[-ContentFallback]
[-ContentLocation <String>]
-DeploymentTypeName <String>
[-EnableBranchCache]
[-EstimatedRuntimeMins <Int32>]
[-Force32Bit]
[-ForceScriptDetection32Bit]
-InputObject <IResultObject>
[-InstallationBehaviorType <InstallationBehaviorType>]
-InstallCommand <String>
[-InstallWorkingDirectory <String>]
[-LogonRequirementType <LogonRequirementType>]
[-MaximumRuntimeMins <Int32>]
[-RebootBehavior <PostExecutionBehavior>]
[-RepairCommand <String>]
[-RepairWorkingDirectory <String>]
[-RequireUserInteraction]
[-ScriptFile <String>]
-ScriptLanguage <ScriptLanguage>
[-ScriptText <String>]
[-SlowNetworkDeploymentMode <ContentHandlingMode>]
[-SourceUpdateProductCode <String>]
[-UninstallCommand <String>]
[-UninstallContentLocation <String>]
[-UninstallOption <UninstallContentSetting>]
[-UninstallWorkingDirectory <String>]
[-UserInteractionMode <UserInteractionMode>]
[-AddRequirement <Rule[]>]
[-RemoveLanguage <String[]>]
[-RemoveRequirement <Rule[]>]
[-AddLanguage <String[]>]
[-Comment <String>]
[-Force]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Add-CMMsiDeploymentType
[-CacheContent]
[-ContentFallback]
-ContentLocation <String>
[-DeploymentTypeName <String>]
[-EnableBranchCache]
[-EstimatedRuntimeMins <Int32>]
[-Force32Bit]
-InputObject <IResultObject>
[-InstallationBehaviorType <InstallationBehaviorType>]
[-InstallCommand <String>]
[-InstallWorkingDirectory <String>]
[-LogonRequirementType <LogonRequirementType>]
[-MaximumRuntimeMins <Int32>]
[-ProductCode <String>]
[-RebootBehavior <PostExecutionBehavior>]
[-RepairCommand <String>]
[-RepairWorkingDirectory <String>]
[-RequireUserInteraction]
[-SlowNetworkDeploymentMode <ContentHandlingMode>]
[-SourceUpdateProductCode <String>]
[-UninstallCommand <String>]
[-UninstallContentLocation <String>]
[-UninstallOption <UninstallContentSetting>]
[-UninstallWorkingDirectory <String>]
[-UserInteractionMode <UserInteractionMode>]
[-AddRequirement <Rule[]>]
[-RemoveLanguage <String[]>]
[-RemoveRequirement <Rule[]>]
[-AddLanguage <String[]>]
[-Comment <String>]
[-Force]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
Use this cmdlet to add a Windows Installer (MSI) deployment type to an application.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1: Add a deployment type
This command adds the Windows Installer deployment type named DTMsi from the specified location to the application named testMsi. This deployment type supports both English (United States) (en-US) and Chinese (Simplified) (zh-CN).
Add-CMMSiDeploymentType -ApplicationName "testMsi" -DeploymentTypeName "DTMsi" -ContentLocation "\\Server1\Applications\MSI\32BitSDK\32BitCompat.msi" -AddLanguage "en-US","zh-CN" -Comment "New Deployment Type"Example 2: Add a detection method
This example adds a detection clause that requires a specific product ID and directory name to exist.
$app = Get-CMApplication -ApplicationName "CentralApp"
$guid = "9900a338-484b-4a18-884e-bce87654ce1b"
$clause1 = New-CMDetectionClauseWindowsInstaller -ProductCode $guid -Value -ExpressionOperator IsEquals -ExpectedValue "1.1.1.1"
$clause2 = New-CMDetectionClauseDirectory -DirectoryName "mymsi" -Path "C:\" -Existence
$app | Add-CMMsiDeploymentType -ContentLocation "\\myserver\mypath\mymsi.msi" -Force -AddDetectionClause ($clause1, $clause2)Parameters
-AddDetectionClause
Specify an array of detection method clauses for this deployment type. To create a detection clause, use one of the following cmdlets:
- New-CMDetectionClauseDirectory
- New-CMDetectionClauseFile
- New-CMDetectionClauseRegistryKey
- New-CMDetectionClauseRegistryKeyValue
- New-CMDetectionClauseWindowsInstaller
Save the output of these cmdlets into a variable. Then specify those variables as an array for this parameter. For example, -AddDetectionClause $clauseFile1,$clauseFile2,$clauseFile3.
You can also use Get-CMDeploymentTypeDetectionClause to get an existing detection clause from another application.
| Type: | DetectionClause[] |
| Aliases: | AddDetectionClauses |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AddLanguage
Specify an array of language tags that the deployment type supports. For example, to add Russian (Russia), specify the tag ru-RU.
For more information and a list of language tags, see Windows Language Code Identifier (LCID) Reference.
| Type: | String[] |
| Aliases: | AddLanguages, Languages, Language |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AddRequirement
Specify an array of requirement objects for the deployment type. To create a requirement rule object, use one of the following cmdlets:
- New-CMRequirementRuleActiveDirectorySiteValue
- New-CMRequirementRuleBooleanValue
- New-CMRequirementRuleCMSiteValue
- New-CMRequirementRuleCommonValue
- New-CMRequirementRuleDeviceOwnershipValue
- New-CMRequirementRuleExistential
- New-CMRequirementRuleExpression
- New-CMRequirementRuleFileAttributeValue
- New-CMRequirementRuleFilePermissionValue
- New-CMRequirementRuleFreeDiskSpaceValue
- New-CMRequirementRuleInputTypeValue
- New-CMRequirementRuleOperatingSystemLanguageValue
- New-CMRequirementRuleOperatingSystemValue
- New-CMRequirementRuleOUValue
- New-CMRequirementRuleRegistryKeyPermissionValue
- New-CMRequirementRuleScreenResolutionValue
Starting in version 2111, you can use the Get-CMDeploymentTypeRequirement cmdlet to copy rules from another deployment type.
| Type: | Rule[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ApplicationId
Specify the ID of the application for this deployment type.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ApplicationName
Specify the name of the application for this deployment type.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CacheContent
Set this parameter to $true to save content indefinitely in the client cache.
| Type: | SwitchParameter |
| Aliases: | PersistContentInClientCache |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Comment
Specify an optional description for the deployment type.
| Type: | String |
| Aliases: | AdministratorComment |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ContentFallback
If you set this parameter to $true, when the content isn't available on any distribution points in the client's current or neighbor boundary groups, the client can use distribution points in the site default boundary group.
| Type: | SwitchParameter |
| Aliases: | EnableContentLocationFallback, AllowClientsToUseFallbackSourceLocationForContent |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ContentLocation
Specifies the network source path of the MSI file. The site system server requires permission to read the content files.
| Type: | String |
| Aliases: | InstallationFileLocation |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DeploymentTypeName
Specify a display name for this deployment type.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DetectionClauseConnector
When you use the GroupDetectionClauses parameter to group detection clauses, use this parameter to specify the connector.
The following example defines the OR connector: @{"LogicalName"=$clauseFile3.Setting.LogicalName;"Connector"="OR"}
| Type: | Hashtable[] |
| Aliases: | DetectionClauseConnectors |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableBranchCache
This parameter is deprecated. BranchCache is always enabled on clients, and they use it if the distribution point supports it.
| Type: | SwitchParameter |
| Aliases: | AllowClientsToShareContentOnSameSubnet |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EstimatedRuntimeMins
Specify the estimated installation time, in minutes, of this deployment type for the application. Software Center displays this estimate to the user before the application installs.
| Type: | Int32 |
| Aliases: | EstimatedInstallationTimeMinutes, EstimatedInstallationTimeMins, EstimatedRunTimeMinutes |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Force
Forces the command to run without asking for user confirmation.
| Type: | SwitchParameter |
| Aliases: | ForceForUnknownPublisher |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Force32Bit
Set this parameter to $true to run the install and uninstall programs as 32-bit processes on 64-bit clients.
| Type: | SwitchParameter |
| Aliases: | Force32BitInstaller |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceScriptDetection32Bit
If you use a custom script to detect the presence of this deployment type, set this parameter to $true to run the script as a 32-bit process on 64-bit clients.
| Type: | SwitchParameter |
| Aliases: | Force32BitDetectionScript |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-GroupDetectionClauses
When you configure rules to detect the presence of this deployment type, use this parameter to group clauses. To create a detection clause, use one of the following cmdlets:
- New-CMDetectionClauseDirectory
- New-CMDetectionClauseFile
- New-CMDetectionClauseRegistryKey
- New-CMDetectionClauseRegistryKeyValue
- New-CMDetectionClauseWindowsInstaller
Save the output of these cmdlets into a variable. Then use the following format to group clauses: $clause2.Setting.LogicalName, $clause3.Setting.LogicalName.
Tip
In the Configuration Manager console, when you select the Group action, the clauses show parentheses before and after the grouped clauses.
| Type: | String[] |
| Aliases: | GroupDetectionClausesByLogicalName |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specify an application object to configure. To get this object, use the Get-CMApplication cmdlet.
| Type: | IResultObject |
| Aliases: | Application |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-InstallationBehaviorType
Specify the installation behavior for this deployment type:
InstallForUser: The client only installs the application for the user to whom you deploy the application.InstallForSystem: The client installs the application only once. It's available to all users.InstallForSystemIfResourceIsDeviceOtherwiseInstallForUser: If you deploy the application to a device, the client installs it for all users. If you deploy the application to a user, the client only installs it for that user.
| Type: | InstallationBehaviorType |
| Accepted values: | InstallForUser, InstallForSystem, InstallForSystemIfResourceIsDeviceOtherwiseInstallForUser |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InstallCommand
Specify the installation program command line to install the Windows Installer package.
| Type: | String |
| Aliases: | InstallationProgram |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InstallWorkingDirectory
Specify the path to use as the working directory when the client runs the InstallCommand.
| Type: | String |
| Aliases: | InstallationStartIn, InstallFolder |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LogonRequirementType
Specify the requirement for a signed-in user:
OnlyWhenNoUserLoggedOn: Only when no user is signed into Windows.OnlyWhenUserLoggedOn: Only when a user is signed in. This option is the default.WhetherOrNotUserLoggedOn: Whether or not a user is signed in.Note
The value
WhereOrNotUserLoggedOnis deprecated. It's replaced byWhetherOrNotUserLoggedOn.
If you set InstallationBehaviorType to InstallForUser, then you can't set this parameter.
| Type: | LogonRequirementType |
| Accepted values: | OnlyWhenUserLoggedOn, WhereOrNotUserLoggedOn, WhetherOrNotUserLoggedOn, OnlyWhenNoUserLoggedOn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaximumRuntimeMins
Specify the maximum allowed run time of the deployment program for this application. Set an integer value in minutes.
| Type: | Int32 |
| Aliases: | MaximumAllowedRunTimeMinutes, MaximumAllowedRunTimeMins, MaximumRunTimeMinutes |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ProductCode
Specify the MSI product code to set as the detection method. When you use this parameter, it overwrites any other detection methods.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RebootBehavior
Specify the post-installation behavior:
BasedOnExitCode: Determine behavior based on return codes.NoAction: No specific action.ProgramReboot: The software install program might force a device restart.ForceReboot: Configuration Manager client will force a mandatory device restart.
For more information on these behaviors, see Create applications in Configuration Manager.
| Type: | PostExecutionBehavior |
| Accepted values: | BasedOnExitCode, NoAction, ForceReboot, ProgramReboot |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveLanguage
Specify an array of supported languages to remove from this deployment type.
| Type: | String[] |
| Aliases: | RemoveLanguages |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveRequirement
Specify an array of requirement rules to remove from this deployment type.
| Type: | Rule[] |
| Aliases: | RemoveRequirements |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RepairCommand
Use this parameter to configure the repair command. Also configure the RepairWorkingDirectory parameter.
Starting in version 2006, you can specify an empty string.
| Type: | String |
| Aliases: | RepairProgram |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RepairWorkingDirectory
Use this parameter to configure the repair command's working directory. Also configure the RepairCommand parameter.
| Type: | String |
| Aliases: | RepairStartIn, RepairFolder |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RequireUserInteraction
Set this parameter to $true to allow users to view and interact with the deployment type installation.
| Type: | SwitchParameter |
| Aliases: | RequiresUserInteraction |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScriptFile
Specify the script file to use to detect this deployment type. Also use the ScriptLanguage parameter.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScriptLanguage
If you use the ScriptFile or ScriptText parameters, use this parameter to specify the script language.
| Type: | ScriptLanguage |
| Aliases: | ScriptType |
| Accepted values: | PowerShell, VBScript, JavaScript |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ScriptText
Specify the text of a script to detect this deployment type. Also use the ScriptLanguage parameter.
For more information, see About custom script detection methods.
| Type: | String |
| Aliases: | ScriptContent |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SlowNetworkDeploymentMode
When a client uses a distribution point from a neighbor boundary group or the default site boundary group, specify the deployment option:
DoNothing: Don't download contentDownload: Download content from the distribution point and run locally
| Type: | ContentHandlingMode |
| Accepted values: | DoNothing, Download |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SourceUpdateProductCode
Specify an MSI product code. This product code is a GUID format.
Windows Source management enables an .MSI represented by this deployment type to automatically be updated or repaired from content source files on an available distribution point.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UninstallCommand
Specifies the command line to uninstall the application.
Starting in version 2006, you can specify an empty string.
| Type: | String |
| Aliases: | UninstallationProgram |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UninstallContentLocation
Specify the network path to source content to use with the UninstallCommand that's different from the ContentLocation. Use this parameter when you set UninstallOption to Different.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UninstallOption
Specify what content to use with the UninstallCommand:
SameAsInstall: The install and uninstall content are the same. This option is the default.NoneRequired: The application doesn't need content for uninstall.Different: The uninstall content is different from the install content. Use UninstallContentLocation to specify the network path to the content that's used to uninstall the application.
| Type: | UninstallContentSetting |
| Accepted values: | SameAsInstall, NoneRequired, Different |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UninstallWorkingDirectory
Specify the path to use as the working directory when the client runs the UninstallCommand.
| Type: | String |
| Aliases: | UninstallationStartIn, UninstallFolder |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UserInteractionMode
Specify the installation program visibility:
Normal: The deployment type runs in the normal mode based on system and program defaults. This mode is the default.Minimized: The deployment type runs minimized on client devices. Users might see the installation activity in the notification area or taskbar.Maximized: The deployment type runs maximized on client devices. Users see all installation activity.Hidden: The deployment type runs hidden on client devices. Users see no installation activity.
| Type: | UserInteractionMode |
| Aliases: | InstallationProgramVisibility |
| Accepted values: | Normal, Minimized, Maximized, Hidden |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet doesn't run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
System.Object