Get-Mailbox
This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.
Use the Get-Mailbox cmdlet to view mailbox objects and attributes, populate property pages, or supply mailbox information to other tasks.
Note: In Exchange Online PowerShell, we recommend that you use the Get-EXOMailbox cmdlet instead of this cmdlet. For more information, see Connect to Exchange Online PowerShell.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Get-Mailbox
[-Anr <String>]
[-Arbitration]
[-Archive]
[-AuditLog]
[-AuxAuditLog]
[-Credential <PSCredential>]
[-DomainController <Fqdn>]
[-Filter <String>]
[-GroupMailbox]
[-IgnoreDefaultScope]
[-InactiveMailboxOnly]
[-IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames]
[-IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames]
[-IncludeAcceptMessagesOnlyFromWithDisplayNames]
[-IncludeEmailAddressDisplayNames]
[-IncludeInactiveMailbox]
[-Migration]
[-Monitoring]
[-OrganizationalUnit <OrganizationalUnitIdParameter>]
[-PublicFolder]
[-ReadFromDomainController]
[-RecipientTypeDetails <RecipientTypeDetails[]>]
[-RemoteArchive]
[-ResultSize <Unlimited>]
[-SoftDeletedMailbox]
[-SortBy <String>]
[-SupervisoryReviewPolicy]
[<CommonParameters>]Get-Mailbox
[-Database <DatabaseIdParameter>]
[-Arbitration]
[-Archive]
[-AuditLog]
[-AuxAuditLog]
[-Credential <PSCredential>]
[-DomainController <Fqdn>]
[-Filter <String>]
[-GroupMailbox]
[-IgnoreDefaultScope]
[-Migration]
[-Monitoring]
[-OrganizationalUnit <OrganizationalUnitIdParameter>]
[-PublicFolder]
[-ReadFromDomainController]
[-RecipientTypeDetails <RecipientTypeDetails[]>]
[-RemoteArchive]
[-ResultSize <Unlimited>]
[-SortBy <String>]
[-SupervisoryReviewPolicy]
[<CommonParameters>]Get-Mailbox
[[-Identity] <MailboxIdParameter>]
[-Arbitration]
[-Archive]
[-AuditLog]
[-AuxAuditLog]
[-Credential <PSCredential>]
[-DomainController <Fqdn>]
[-Filter <String>]
[-GroupMailbox]
[-IgnoreDefaultScope]
[-InactiveMailboxOnly]
[-IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames]
[-IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames]
[-IncludeAcceptMessagesOnlyFromWithDisplayNames]
[-IncludeEmailAddressDisplayNames]
[-IncludeInactiveMailbox]
[-Migration]
[-Monitoring]
[-OrganizationalUnit <OrganizationalUnitIdParameter>]
[-PublicFolder]
[-ReadFromDomainController]
[-RecipientTypeDetails <RecipientTypeDetails[]>]
[-RemoteArchive]
[-ResultSize <Unlimited>]
[-SoftDeletedMailbox]
[-SortBy <String>]
[-SupervisoryReviewPolicy]
[<CommonParameters>]Get-Mailbox
[-Server <ServerIdParameter>]
[-Arbitration]
[-Archive]
[-AuditLog]
[-AuxAuditLog]
[-Credential <PSCredential>]
[-DomainController <Fqdn>]
[-Filter <String>]
[-GroupMailbox]
[-IgnoreDefaultScope]
[-Migration]
[-Monitoring]
[-OrganizationalUnit <OrganizationalUnitIdParameter>]
[-PublicFolder]
[-ReadFromDomainController]
[-RecipientTypeDetails <RecipientTypeDetails[]>]
[-RemoteArchive]
[-ResultSize <Unlimited>]
[-SortBy <String>]
[-SupervisoryReviewPolicy]
[<CommonParameters>]Get-Mailbox
[-MailboxPlan <MailboxPlanIdParameter>]
[-Archive]
[-Filter <String>]
[-GroupMailbox]
[-InactiveMailboxOnly]
[-IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames]
[-IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames]
[-IncludeAcceptMessagesOnlyFromWithDisplayNames]
[-IncludeEmailAddressDisplayNames]
[-IncludeInactiveMailbox]
[-Migration]
[-OrganizationalUnit <OrganizationalUnitIdParameter>]
[-PublicFolder]
[-RecipientTypeDetails <RecipientTypeDetails[]>]
[-ResultSize <Unlimited>]
[-SoftDeletedMailbox]
[-SortBy <String>]
[<CommonParameters>]Description
When you use the Get-Mailbox cmdlet in on-premises Exchange environments to view the quota settings for a mailbox, you first need to check the value of the UseDatabaseQuotaDefaults property. The value True means per-mailbox quota settings are ignored, and you need to use the Get-MailboxDatabase cmdlet to see the actual values. If the UseDatabaseQuotaDefaults property is False, the per-mailbox quota settings are used, so what you see with the Get-Mailbox cmdlet are the actual quota values for the mailbox.
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Get-Mailbox -ResultSize unlimitedThis example returns a summary list of all the mailboxes in your organization.
Example 2
Get-Mailbox -OrganizationalUnit UsersThis example returns a list of all the mailboxes in your organization in the Users OU.
Example 3
Get-Mailbox -Anr ChrThis example returns all the mailboxes that resolve from the ambiguous name resolution search on the string "Chr". This example returns mailboxes for users such as Chris Ashton, Christian Hess, and Christa Geller.
Example 4
Get-Mailbox -Archive -Database MBXDB01This example returns a summary list of all archive mailboxes in the database named MBXDB01.
Example 5
Get-Mailbox -Identity ed@contoso.com -RemoteArchiveThis example returns information about the remote archive mailbox for the user ed@contoso.com.
Parameters
-Anr
The Anr parameter specifies a string on which to perform an ambiguous name resolution (ANR) search. You can specify a partial string and search for objects with an attribute that matches that string. The default attributes searched are:
- CommonName (CN)
- DisplayName
- FirstName
- LastName
- Alias
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-Arbitration
This parameter is available only in on-premises Exchange.
The Arbitration switch specifies whether to return only arbitration mailboxes in the results. You don't need to specify a value with this switch.
Arbitration mailboxes are system mailboxes that are used for storing different types of system data and for managing messaging approval workflow.
To return arbitration mailboxes that are used to store audit log settings or data, don't use this switch. Instead, use the AuditLog or AuxAuditLog switches.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Archive
The Archive switch specifies whether to return only mailboxes that have an archive enabled in the results. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-AuditLog
This parameter is available only in on-premises Exchange.
The AuditLog switch specifies whether to return only audit log mailboxes in the results. You don't need to specify a value with this switch.
Audit log mailboxes are arbitration mailboxes that are used to store audit log settings.
To return other types of arbitration mailboxes, don't use this switch. Instead, use the Arbitration switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-AuxAuditLog
This parameter is available only in on-premises Exchange.
The AuxAuditLog switch specifies whether to return only auxiliary audit log mailboxes in the results. You don't need to specify a value with this switch.
Audit log mailboxes are arbitration mailboxes that are used to store audit log settings.
To return other types of arbitration mailboxes, don't use this switch. Instead, use the Arbitration switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
-Credential
This parameter is available only in on-premises Exchange.
The Credential parameter specifies the username and password that's used to run this command. Typically, you use this parameter in scripts or when you need to provide different credentials that have the required permissions.
A value for this parameter requires the Get-Credential cmdlet. To pause this command and receive a prompt for credentials, use the value (Get-Credential). Or, before you run this command, store the credentials in a variable (for example, $cred = Get-Credential) and then use the variable name ($cred) for this parameter. For more information, see Get-Credential.
| Type: | PSCredential |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Database
This parameter is available only in on-premises Exchange.
The Database parameter filters the results by mailbox database. When you use this parameter, only mailboxes on the specified database are included in the results. You can any value that uniquely identifies the database. For example:
- Name
- Distinguished name (DN)
- GUID
You can't use this parameter with the Anr, Identity, or Server parameters.
| Type: | DatabaseIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DomainController
This parameter is available only in on-premises Exchange.
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Filter
The Filter parameter uses OPATH syntax to filter the results by the specified properties and values. The search criteria uses the syntax "Property -ComparisonOperator 'Value'".
- Enclose the whole OPATH filter in double quotation marks " ". If the filter contains system values (for example,
$true,$false, or$null), use single quotation marks ' ' instead. Although this parameter is a string (not a system block), you can also use braces { }, but only if the filter doesn't contain variables. - Property is a filterable property. For more information about the filterable properties, see Filterable properties for the Filter parameter.
- ComparisonOperator is an OPATH comparison operator (for example
-eqfor equals and-likefor string comparison). For more information about comparison operators, see about_Comparison_Operators. - Value is the property value to search for. Enclose text values and variables in single quotation marks (
'Value'or'$Variable'). If a variable value contains single quotation marks, you need to identify (escape) the single quotation marks to expand the variable correctly. For example, instead of'$User', use'$($User -Replace "'","''")'. Don't enclose integers or system values in quotation marks (for example, use500,$true,$false, or$nullinstead).
You can chain multiple search criteria together using the logical operators -and and -or. For example, "Criteria1 -and Criteria2" or "(Criteria1 -and Criteria2) -or Criteria3".
For detailed information about OPATH filters in Exchange, see Additional OPATH syntax information.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-GroupMailbox
The GroupMailbox switch specifies whether to return only Microsoft 365 Groups in the results. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019, Exchange Online |
-Identity
The Identity parameter specifies the mailbox that you want to view. You can use any value that uniquely identifies the mailbox. For example:
- Name
- Alias
- Distinguished name (DN)
- Canonical DN
- Domain\Username
- Email address
- GUID
- LegacyExchangeDN
- SamAccountName
- User ID or user principal name (UPN)
You can't use this parameter with the Anr, Database, MailboxPlan or Server parameters.
| Type: | MailboxIdParameter |
| Position: | 1 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-IgnoreDefaultScope
This parameter is available only in on-premises Exchange.
The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange PowerShell session, and to use the entire forest as the scope. You don't need to specify a value with this switch.
This switch enables the command to access Active Directory objects that aren't currently available in the default scope, but also introduces the following restrictions:
- You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.
- You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-InactiveMailboxOnly
This parameter is available only in the cloud-based service.
The InactiveMailboxOnly switch specifies whether to return only inactive mailboxes in the results. You don't need to specify a value with this switch.
An inactive mailbox is a mailbox that's placed on Litigation Hold or In-Place Hold before it's soft-deleted. The contents of an inactive mailbox are preserved until the hold is removed.
To include active and inactive mailboxes in the results, don't use this switch. Instead, use the IncludeInactiveMailbox switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames
This parameter is available only in the cloud-based service.
{{ Fill IncludeAcceptMessagesOnlyFromDLMembersWithDisplayNames Description }}
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames
This parameter is available only in the cloud-based service.
{{ Fill IncludeAcceptMessagesOnlyFromSendersOrMembersWithDisplayNames Description }}
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-IncludeAcceptMessagesOnlyFromWithDisplayNames
This parameter is available only in the cloud-based service.
{{ Fill IncludeAcceptMessagesOnlyFromWithDisplayNames Description }}
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-IncludeEmailAddressDisplayNames
This parameter is available only in the cloud-based service.
{{ Fill IncludeEmailAddressDisplayNames Description }}
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-IncludeInactiveMailbox
This parameter is available only in the cloud-based service.
The IncludeInactiveMailbox switch specifies whether to include inactive mailboxes in the results. You don't need to specify a value with this switch.
An inactive mailbox is a mailbox that's placed on Litigation Hold or In-Place Hold before it's soft-deleted. The contents of an inactive mailbox are preserved until the hold is removed.
To return only inactive mailboxes in the results, don't use this switch. Instead, use the InactiveMailboxOnly switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-MailboxPlan
This parameter is available only in the cloud-based service.
The MailboxPlan parameter filters the results by mailbox plan. When you use this parameter, only mailboxes that are assigned the specified mailbox plan are returned in the results. You can use any value that uniquely identifies the mailbox plan. For example:
- Name
- Alias
- Display name
- Distinguished name (DN)
- GUID
A mailbox plan specifies the permissions and features available to a mailbox user in cloud-based organizations. You can see the available mailbox plans by using the Get-MailboxPlan cmdlet.
You can't use this parameter with the Anr or Identity parameters.
| Type: | MailboxPlanIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-Migration
The Migration switch specifies whether to return only migration mailboxes in the results. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019, Exchange Online |
-Monitoring
This parameter is available only in on-premises Exchange.
The Monitoring switch specifies whether to return only monitoring mailboxes in the results. You don't need to specify a value with this switch.
Monitoring mailboxes are associated with managed availability and the Exchange Health Manager service, and have a RecipientTypeDetails property value of MonitoringMailbox.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-OrganizationalUnit
The OrganizationalUnit parameter filters the results based on the object's location in Active Directory. Only objects that exist in the specified location are returned. Valid input for this parameter is an organizational unit (OU) or domain that's returned by the Get-OrganizationalUnit cmdlet. You can use any value that uniquely identifies the OU or domain. For example:
- Name
- Canonical name
- Distinguished name (DN)
- GUID
| Type: | OrganizationalUnitIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-PublicFolder
The PublicFolder switch specifies whether to return only public folder mailboxes in the results. You don't need to specify a value with this switch.
Public folder mailboxes are specially designed mailboxes that store the hierarchy and content of public folders.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-ReadFromDomainController
This parameter is available only in on-premises Exchange.
The ReadFromDomainController switch specifies that information should be read from a domain controller in the user's domain. You don't need to specify a value with this switch.
The command: Set-AdServerSettings -ViewEntireForest $true to include all objects in the forest requires the ReadFromDomainController switch. Otherwise, the command might use a global catalog that contains outdated information. Also, you might need to run multiple iterations of the command with the ReadFromDomainController switch to get the information.
By default, the recipient scope is set to the domain that hosts your Exchange servers.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-RecipientTypeDetails
The RecipientTypeDetails parameter filters the results by the specified mailbox subtype. Valid values are:
- DiscoveryMailbox
- EquipmentMailbox
- GroupMailbox (Exchange 2013 or later and cloud)
- LegacyMailbox
- LinkedMailbox
- LinkedRoomMailbox (Exchange 2013 or later and cloud)
- RoomMailbox
- SchedulingMailbox (Exchange 2016 or later and cloud)
- SharedMailbox
- TeamMailbox (Exchange 2013 or later and cloud)
- UserMailbox
You can specify multiple values separated by commas.
| Type: | RecipientTypeDetails[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-RemoteArchive
This parameter is available only in on-premises Exchange.
The RemoteArchive switch specifies whether to return only remote archive mailboxes in the results. You don't need to specify a value with this switch.
Remote archive mailboxes are archive mailboxes in the cloud-based service that are associated with mailbox users in on-premises Exchange organizations.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ResultSize
The ResultSize parameter specifies the maximum number of results to return. If you want to return all requests that match the query, use unlimited for the value of this parameter. The default value is 1000.
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-Server
This parameter is available only in on-premises Exchange.
The Server parameter filters the results by Exchange server. When you use this parameter, only mailboxes on the specified Exchange server are included in the results.
You can use any value that uniquely identifies the server. For example:
- Name
- FQDN
- Distinguished name (DN)
- Exchange Legacy DN
You can't use this parameter with the Anr, Database, or Identity parameters.
The ServerName and ServerLegacyDN properties for a mailbox may not be updated immediately after a mailbox move within a database availability group (DAG). To get the most up-to-date values for these mailbox properties, run the command Get-Mailbox <Identity> | Get-MailboxStatistics | Format-List Name,ServerName,ServerLegacyDN.
Note: The result from this parameter could be a legacy value before migration. For better results, use the Database parameter instead.
| Type: | ServerIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-SoftDeletedMailbox
This parameter is available only in the cloud-based service.
The SoftDeletedMailbox switch specifies whether to return only soft-deleted mailboxes in the results. You don't need to specify a value with this switch.
Soft-deleted mailboxes are deleted mailboxes that are still recoverable.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Online |
-SortBy
The SortBy parameter specifies the property to sort the results by. You can sort by only one property at a time. The results are sorted in ascending order.
If the default view doesn't include the property you're sorting by, you can append the command with | Format-Table -Auto Property1,Property2,...PropertyX. to create a new view that contains all of the properties that you want to see. Wildcards (*) in the property names are supported.
You can sort by the following properties:
- Name
- DisplayName
- Alias
- Office
- ServerLegacyDN
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online |
-SupervisoryReviewPolicy
This parameter is available only in on-premises Exchange.
This parameter is reserved for internal Microsoft use.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2016, Exchange Server 2019 |
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.