Upravit

Sdílet prostřednictvím


Set-App

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-App cmdlet to modify the availability of organization apps.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-App
   [-Identity] <AppIdParameter>
   [-Confirm]
   [-DefaultStateForUser <DefaultStateForUser>]
   [-DomainController <Fqdn>]
   [-Enabled <Boolean>]
   [-OrganizationApp]
   [-PrivateCatalog]
   [-ProvidedTo <ClientExtensionProvidedTo>]
   [-UserList <MultiValuedProperty>]
   [-WhatIf]
   [<CommonParameters>]

Description

The Set-App cmdlet can only be used when configuring the availability of an organization app. This task requires that the specified app has already been installed (for example, that the app has been installed with the New-App cmdlet, or that it's a default app for Outlook).

Default apps in Outlook on the web and apps that you've installed for use by users in your organization are known as organization apps. Organization apps can't be removed by end users, but can be enabled or disabled. If an app is an organization app (scope default or organization), the delete control on the toolbar is disabled for end users. Administrators are able to remove organization apps. Administrators can't remove default apps, but they can disable them for the entire organization.

For more information, see Manage user access to add-ins for Outlook in Exchange Server and Manage deployment of add-ins in the Microsoft 365 admin center.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

$a= Get-DistributionGroupMember -Identity "Finance Team"

Set-App -OrganizationApp -Identity 3f10017a-9bbe-4a23-834b-6a8fe3af0e37 -ProvidedTo SpecificUsers -UserList $a.Identity -DefaultStateForUser Enabled

This example changes the organization app named FinanceTestApp, which was installed to everyone in the organization, to be provided to members of the Finance Team group and to be enabled by default.

Example 2

Set-App -OrganizationApp -Identity 3f10017a-9bbe-4a23-834b-6a8fe3af0e37 -Enabled $false

This example disables the organization app named FinanceTestApp across the organization and hides it from end user view.

Parameters

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-DefaultStateForUser

The DefaultStateForUser parameter specifies the default initial state of the organization app for the specified users. Valid values are:

  • Enabled: The organization app is enabled.
  • Disabled: The organization app is disabled. This is the default value.
  • AlwaysEnabled: The organization app is enabled, and users can't disable it.

You use this parameter with the OrganizationApp switch.

Type:DefaultStateForUser
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Enabled

The Enabled parameter specifies whether the app is available to users in the organization. Valid values are:

  • $true: The app is enabled for the specified users. This is the default value.
  • $false: The app isn't enabled for any users in the organization. This hides the app from user view for all users.

This setting overrides the ProvidedTo, UserList, and DefaultStateForUser settings. This setting doesn't prevent users from installing their own instance of the app if they have install permissions.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-Identity

The Identity parameter specifies the AppID (GUID value) of the app that you want to modify. To find the GUID value of an app, run the command Get-App | Format-Table -Auto DisplayName,AppId.

Type:AppIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-OrganizationApp

The OrganizationApp switch specifies that the scope of the app is organizational (not bound to a specific user). You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-PrivateCatalog

The PrivateCatalog switch specifies that the app you want to modify is located in a private catalog. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019, Exchange Online

-ProvidedTo

The ProvidedTo parameter specifies the availability of the app in your organization. Valid value are:

  • Everyone: The app is provided to every user in the organization. This is the default value. Every user sees this app listed in the installed apps list in Outlook on the web Options. When an app in the installed apps list is enabled, users can use the features of this app in their email. All users are blocked from installing their own instances of this app, including but not limited to users with install apps permissions.
  • SpecificUsers: This app is provided to only the users specified by the UserList parameter. All other users don't see this organizational app in their management view, nor will it activate in their mail or calendar items. The specified users are also blocked from installing their own instance of this app. Unlisted users aren't blocked from installing their own instance of this app.

You use this parameter with the OrganizationApp switch.

Type:ClientExtensionProvidedTo
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-UserList

The UserList parameter specifies who can use an organizational app. This parameter is limited to 1000 users. In the cloud-based service, this value is less relevant as Office Add-in management is moving to Centralized Deployment.

Valid values are mailboxes or mail users in your organization. You can use any value that uniquely identifies the user. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)

You can enter multiple values separated by commas. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Value1","Value2",..."ValueN". Maximum size of the list is 1000 recipients.

You use this parameter with the OrganizationApp switch.

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.