Upravit

Sdílet prostřednictvím


Set-Group

This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.

Use the Set-Group cmdlet to modify group object settings. If the group is a mail-enabled security group or a distribution group, you can use the Set-DistributionGroup cmdlet to modify other Microsoft Exchange settings that aren't available by using the Set-Group cmdlet.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-Group
   [-Identity] <GroupIdParameter>
   [-BypassSecurityGroupManagerCheck]
   [-Confirm]
   [-Description <MultiValueProperty>]
   [-DisplayName <String>]
   [-DomainController <Fqdn>]
   [-IgnoreDefaultScope]
   [-IsHierarchicalGroup <Boolean>]
   [-ManagedBy <GeneralRecipientIdParameter[]>]
   [-Name <String>]
   [-Notes <String>]
   [-PhoneticDisplayName <String>]
   [-SeniorityIndex <Int32>]
   [-SimpleDisplayName <String>]
   [-Universal]
   [-WhatIf]
   [-WindowsEmailAddress <SmtpAddress>]
   [<CommonParameters>]

Description

You can't use the Set-Group cmdlet to modify dynamic distribution groups. To modify dynamic distribution groups, use the Set-DynamicDistributionGroup cmdlet.

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Set-Group -Identity "Legal Department" -Universal -Notes "verified"

This example applies the following changes to the existing global security group Legal Department:

Change the group's scope to universal.

Add a Notes parameter value of verified.

Example 2

Set-Group -Identity "Human Resources" -IsHierarchicalGroup $true -SeniorityIndex 1

This example specifies that the group Human Resources is a hierarchical group and will display last within its hierarchy because its index number is 1.

Parameters

-BypassSecurityGroupManagerCheck

The BypassSecurityGroupManagerCheck switch specifies whether to allow a user who isn't an owner of the group to modify or delete the group. You don't need to specify a value with this switch.

If you aren't defined in the ManagedBy property of the group, you need to use this switch in commands that modify or delete the group. To use this switch, your account requires specific permissions based on the group type:

  • Distribution groups or mail-enabled security groups: You need to be a member of the Organization Management role group or have the Security Group Creation and Membership role assigned.
  • Role groups: You need to be a member of the Organization Management role group or have the Role Management role assigned.
Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Description

This parameter is available only in the cloud-based service.

{{ Fill Description Description }}

Type:MultiValuedProperty
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Online, Exchange Online Protection

-DisplayName

The DisplayName parameter specifies the display name of the group. The display name is visible in the Exchange admin center and in address lists. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

This parameter is meaningful only if the group is mail-enabled.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-DomainController

This parameter is available only in on-premises Exchange.

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

The DomainController parameter isn't supported on Edge Transport servers. An Edge Transport server uses the local instance of Active Directory Lightweight Directory Services (AD LDS) to read and write data.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Identity

The Identity parameter specifies the group that you want to modify. You can use any value that uniquely identifies the group. For example:

  • Name
  • Distinguished name (DN)
  • Canonical DN
  • GUID
Type:GroupIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-IgnoreDefaultScope

This parameter is available only in on-premises Exchange.

The IgnoreDefaultScope switch tells the command to ignore the default recipient scope setting for the Exchange PowerShell session, and to use the entire forest as the scope. You don't need to specify a value with this switch.

This switch enables the command to access Active Directory objects that aren't currently available in the default scope, but also introduces the following restrictions:

  • You can't use the DomainController parameter. The command uses an appropriate global catalog server automatically.
  • You can only use the DN for the Identity parameter. Other forms of identification, such as alias or GUID, aren't accepted.
Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-IsHierarchicalGroup

The IsHierarchicalGroup parameter specifies whether the group is part of a hierarchical address book. Valid values are $true or $false. The default value is $false.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-ManagedBy

The ManagedBy parameter specifies an owner for the group. A group must have at least one owner. If you don't use this parameter to specify the owner when you create the group, the user account that created the group is the owner. The group owner is able to:

  • Modify the properties of the group
  • Add or remove group members
  • Delete the group
  • Approve member depart or join requests (if available)
  • Approve messages sent to the group if moderation is enabled, but no moderators are specified.

The owner you specify for this parameter must be a mailbox, mail user or mail-enabled security group (a mail-enabled security principal that can have permissions assigned). You can use any value that uniquely identifies the owner. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Domain\Username
  • Email address
  • GUID
  • LegacyExchangeDN
  • SamAccountName
  • User ID or user principal name (UPN)

To enter multiple owners and overwrite all existing entries, use the following syntax: Owner1,Owner2,...OwnerN. If the values contain spaces or otherwise require quotation marks, use the following syntax: "Owner1","Owner2",..."OwnerN".

To add or remove owners without affecting other existing entries, use the following syntax: @{Add="Owner1","Owner2",...; Remove="Owner3","Owner4"...}.

Owners that you specify with this parameter are not added as group members. You need to manually add the owners as a members.

Note: Group management in Outlook doesn't work when the owner is a mail-enabled security group. To manage the group in Outlook, the owner must be a mailbox or a mail user.

Type:GeneralRecipientIdParameter[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Name

The Name parameter specifies the unique name of the group. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Notes

The Notes parameters specifies additional information about the object. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-PhoneticDisplayName

The PhoneticDisplayName parameter specifies an alternate spelling of the user's name that's used for text to speech in Unified Messaging (UM) environments. Typically, you use this parameter when the pronunciation and spelling of the user's name don't match. The maximum length is 256 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-SeniorityIndex

The SeniorityIndex parameter specifies the order in which this group will display in a hierarchical address book. A group with a value of 2 will display higher in an address book than a group with a value of 1.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-SimpleDisplayName

The SimpleDisplayName parameter is used to display an alternative description of the object when only a limited set of characters is permitted. Valid characters are:

  • a - z
  • A - Z
  • 0 - 9
  • space
  • " ' ( ) + , - . / : ?

This parameter is meaningful only if the group is mail-enabled.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-Universal

The Universal switch changes the scope of the group from Global or DomainLocal to Universal. You don't need to specify a value with this switch.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

-WindowsEmailAddress

The WindowsEmailAddress parameter specifies the Windows email address for this recipient. This is a common Active Directory attribute that's present in all environments, including environments without Exchange. Using the WindowsEmailAddress parameter on a recipient has one of the following results:

  • In environments where the recipient is subject to email address policies (the EmailAddressPolicyEnabled property is set to the value True for the recipient), the WindowsEmailAddress parameter has no effect on the WindowsEmailAddress property or the primary email address value.
  • In environments where the recipient isn't subject to email address policies (the EmailAddressPolicyEnabled property is set to the value False for the recipient), the WindowsEmailAddress parameter updates the WindowsEmailAddress property and the primary email address to the same value.

The WindowsEmailAddress property is visible for the recipient in Active Directory Users and Computers in the E-mail attribute. The attribute common name is E-mail-Addresses, and the Ldap-Display-Name is mail. If you modify this attribute in Active Directory, the recipient's primary email address is not updated to the same value.

Type:SmtpAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019, Exchange Online, Exchange Online Protection

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.