Upravit

Sdílet prostřednictvím


Set-MailboxDatabase

This cmdlet is available only in on-premises Exchange.

Use the Set-MailboxDatabase cmdlet to configure a variety of properties for a mailbox database.

For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.

Syntax

Set-MailboxDatabase
   [-Identity] <DatabaseIdParameter>
   [-AllowFileRestore <Boolean>]
   [-AutoDagExcludeFromMonitoring <Boolean>]
   [-AutoDatabaseMountDial <AutoDatabaseMountDial>]
   [-BackgroundDatabaseMaintenance <Boolean>]
   [-CalendarLoggingQuota <Unlimited>]
   [-CircularLoggingEnabled <Boolean>]
   [-Confirm]
   [-DatabaseGroup <String>]
   [-DataMoveReplicationConstraint <DataMoveReplicationConstraintParameter>]
   [-DeletedItemRetention <EnhancedTimeSpan>]
   [-DomainController <Fqdn>]
   [-EventHistoryRetentionPeriod <EnhancedTimeSpan>]
   [-IndexEnabled <Boolean>]
   [-IsExcludedFromInitialProvisioning <Boolean>]
   [-IsExcludedFromProvisioning <Boolean>]
   [-IsExcludedFromProvisioningByOperator <Boolean>]
   [-IsExcludedFromProvisioningDueToLogicalCorruption <Boolean>]
   [-IsExcludedFromProvisioningReason <String>]
   [-IssueWarningQuota <Unlimited>]
   [-IsSuspendedFromProvisioning <Boolean>]
   [-JournalRecipient <RecipientIdParameter>]
   [-MailboxRetention <EnhancedTimeSpan>]
   [-MaintenanceSchedule <Schedule>]
   [-MetaCacheDatabaseMaxCapacityInBytes <Int64>]
   [-MountAtStartup <Boolean>]
   [-Name <String>]
   [-OfflineAddressBook <OfflineAddressBookIdParameter>]
   [-ProhibitSendQuota <Unlimited>]
   [-ProhibitSendReceiveQuota <Unlimited>]
   [-PublicFolderDatabase <DatabaseIdParameter>]
   [-QuotaNotificationSchedule <Schedule>]
   [-RecoverableItemsQuota <Unlimited>]
   [-RecoverableItemsWarningQuota <Unlimited>]
   [-RetainDeletedItemsUntilBackup <Boolean>]
   [-RpcClientAccessServer <ClientAccessServerOrArrayIdParameter>]
   [-WhatIf]
   [<CommonParameters>]

Description

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.

Examples

Example 1

Set-MailboxDatabase "Mailbox Database01" -DeletedItemRetention 7.00:00:00

This example sets the length of time that deleted items are retained. If a specific mailbox has its own item retention set, that value is used instead of this value, which is set on the mailbox database.

Example 2

Set-MailboxDatabase <Mailbox Database Name> -RpcClientAccessServer <ClientAccessServer or ClientAccessServerArrayID>

In Exchange Server 2010, this example updates a mailbox database so that all client connections for mailboxes on the database come through the Client Access server or Client Access server array. You can also use this command to change the Client Access server or Client Access server array through which the client is connecting to the Mailbox server.

For more information about RPC access through Client Access servers, see Set-RpcClientAccess and Set-ClientAccessArray.

Parameters

-AllowFileRestore

The AllowFileRestore parameter specifies whether to allow a database to be restored from a backup. Valid values are:

  • $true: You can replace an existing database with a newly-created database. You can mount a database that doesn't match the database entry in Active Directory.
  • $false: You can't replace an existing database with a newly-created database. You can't mount a database that doesn't match the database entry in Active Directory. This is the default value.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDagExcludeFromMonitoring

The AutoDagExcludedFromMonitoring parameter specifies whether to exclude the mailbox database from the ServerOneCopyMonitor, which alerts an administrator when a replicated database has only one healthy copy available. Valid values are:

  • $true: No alert is issued when there's only one healthy copy of the replicated database.
  • $false: An alert is issued when there's only one healthy copy of the replicated database. This is the default value.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-AutoDatabaseMountDial

This parameter is reserved for internal Microsoft use.

Type:AutoDatabaseMountDial
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-BackgroundDatabaseMaintenance

The BackgroundDatabaseMaintenance parameter specifies whether the Extensible Storage Engine (ESE) performs database maintenance. Valid values are:

  • $true: The mailbox database reads the object during database mount and initializes the database to perform background maintenance. This is the default value.
  • $false: The mailbox database reads the object during database mount and initializes the database without the option to perform background maintenance.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-CalendarLoggingQuota

The CalendarLoggingQuota parameter specifies the maximum size of the log in the Recoverable Items folder of the mailbox that stores changes to calendar items. When the log exceeds this size, calendar logging is disabled until messaging records management (MRM) removes older calendar logs to free up more space.

A valid value is a number up to 1.999999999 terabytes (2199023254528 bytes) or the value unlimited. The default value is 6 gigabytes (6442450944 bytes).

When you enter a value, qualify the value with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)
  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of this parameter must be less than or equal to the value of the RecoverableItemsQuota parameter.

This setting applies to all mailboxes in the database that don't have their own calendar logging quota configured.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-CircularLoggingEnabled

The CircularLoggingEnabled parameter specifies whether circular logging is enabled for the database. Valid values are:

  • $true: Circular logging is enabled.
  • $false: Circular logging is disabled. This is the default value.

For more information about circular logging, see Exchange Native Data Protection.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.
  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DatabaseGroup

This parameter is reserved for internal Microsoft use.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DataMoveReplicationConstraint

The DataMoveReplicationConstraint parameter specifies the throttling behavior for high availability mailbox moves. Valid values are:

  • None: Moves shouldn't be throttled to ensure high availability. Use this setting if the database isn't part of a database availability group (DAG).
  • AllCopies (Exchange 2013 or earlier): If the database is replicated, all passive mailbox database copies must have the most recent changes synchronized.
  • AllDatacenters (Exchange 2013 or earlier): If the database is replicated to multiple Active Directory sites, at least one passive mailbox database copy in each site must have the most recent changes replicated.
  • CINoReplication (Exchange 2013 or later): Moves shouldn't be throttled to ensure high availability, but the content indexing service must be up to date.
  • CISecondCopy (Exchange 2013 or later): At least one passive mailbox database copy must have the most recent changes synchronized, and the content indexing service must be up to date. Use this setting to indicate that the database is replicated to one or more mailbox database copies.
  • CISecondDatacenter (Exchange 2013 or later): At least one passive mailbox database copy in another Active Directory site must have the most recent changes replicated, and the content indexing service must be up to date. Use this setting to indicate that the database is replicated to database copies in multiple Active Directory sites.
  • SecondCopy: At least one passive mailbox database copy must have the most recent changes synchronized. This is the default value. Use this setting to indicate that the database is replicated to one or more mailbox database copies.
  • SecondDatacenter: At least one passive mailbox database copy in another Active Directory site must have the most recent changes replicated. Use this setting to indicate that the database is replicated to database copies in multiple Active Directory sites.

Any value other than None enables the Microsoft Exchange Mailbox Replication service to coordinate with Active Manager. For more information, see Active Manager.

Type:DataMoveReplicationConstraintParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DeletedItemRetention

The DeletedItemRetention parameter specifies the length of time to keep deleted items in the Recoverable Items\Deletions folder in mailboxes. Items are moved to this folder when the user deletes items from the Deleted Items folder, empties the Deleted Items folder, or deletes items by using Shift+Delete.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes and ss = seconds.

Valid values are 00:00:00 to 24855.03:14:07. The default value is 14.00:00:00 (14 days).

This setting applies to all mailboxes in the database that don't have their own deleted item retention value configured.

For more information, see Recoverable Items folder in Exchange Server.

Type:EnhancedTimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-EventHistoryRetentionPeriod

The EventHistoryRetentionPeriod parameter specifies the length of time to keep event data. This event data is stored in the event history table in the Exchange store. It includes information about changes to various objects in the mailbox database. You can use this parameter to prevent the event history table from becoming too large and using too much disk space.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Valid values are 00:00:01 to 30.00:00:00. The default value is 7.00:00:00 (7 days).

Type:EnhancedTimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Identity

The Identity parameter specifies the mailbox database that you want to modify. You can use any value that uniquely identifies the database. For example:

  • Name
  • Distinguished name (DN)
  • GUID
Type:DatabaseIdParameter
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-IndexEnabled

This parameter is functional only in Exchange 2016 or earlier.

The IndexEnabled parameter specifies whether Exchange Search indexes the mailbox database. Valid values are:

  • $true: Exchange Search indexes the mailbox database. This is the default value.
  • $false: Exchange Search doesn't index the mailbox database.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-IsExcludedFromInitialProvisioning

This parameter is reserved for internal Microsoft use.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-IsExcludedFromProvisioning

The IsExcludedFromProvisioning parameter specifies whether to exclude the database from the mailbox provisioning load balancer that distributes new mailboxes randomly and evenly across the available databases. Valid values are:

  • $true: The database is excluded from new or move mailbox operations when you don't specify the target mailbox database.
  • $false: The database can be used in new or move mailbox operations when you don't specify the target mailbox database. This is the default value.

The value is automatically set to $true when you set the IsExcludedFromProvisioningDueToLogicalCorruption parameter to $true, and isn't changed back to $false when you set the IsExcludedFromProvisioningDueToLogicalCorruption parameter back to $false. In the case of database corruption, you should set the IsExcludedFromProvisioning parameter back to $false only after you fix the corruption issue or recreate the database.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-IsExcludedFromProvisioningByOperator

The IIsExcludedFromProvisioningByOperator parameter specifies whether to exclude the database from the mailbox provisioning load balancer that distributes new mailboxes randomly and evenly across the available databases.

Valid values are:

  • $true: Indicates that you manually excluded the database. The database is excluded from new or move mailbox operations when you don't specify the target mailbox database.
  • $false: The database can be used in new or move mailbox operations when you don't specify the target mailbox database. This is the default value.

Note that setting this parameter to the value $true has these additional effects on the database:

  • The IsExcludedFromProvisioningReason parameter requires a value if it doesn't already have one.
  • The unmodifiable IsExcludedFromProvisioningBy property is populated with your user account.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-IsExcludedFromProvisioningDueToLogicalCorruption

The IsExcludedFromProvisioningDueToLogicalCorruption parameter specifies whether to exclude the database from the mailbox provisioning load balancer that distributes new mailboxes randomly and evenly across the available databases.

Valid values are:

  • $true: Indicates that you excluded the database due to database corruption. The database is excluded from new or move mailbox operations when you don't specify the target mailbox database.
  • $false: This is the default value. The database can be used in new or move mailbox operations when you don't specify the target mailbox database. You should manually configure this value only after the database corruption is fixed, or after the database is recreated.

Note that setting this parameter to the value $true has these additional effects on the database:

  • The IsExcludedFromProvisioningReason parameter requires a value if it doesn't already have one.
  • The unmodifiable IsExcludedFromProvisioningBy property is populated with your user account.
  • The IsExcludedFromProvisioning property is automatically set to $true.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-IsExcludedFromProvisioningReason

The IsExcludedFromProvisioningReason parameter specifies the reason why you excluded the mailbox database from the mailbox provisioning load balancer. If the value contains spaces, enclose the value in quotation marks ("). The value must contain at least 10 characters.

This parameter requires a value when you set any of the following parameters to $true:

  • IsExcludedFromProvisioning
  • IsExcludedFromProvisioningByOperator
  • IsSuspendedFromProvisioning
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2016, Exchange Server 2019

-IssueWarningQuota

The IssueWarningQuota parameter specifies the warning threshold for the size of the mailbox. If the mailbox reaches or exceeds this size, the user receives a descriptive warning message.

A valid value is a number up to 1.999999999 terabytes (2199023254528 bytes) or the value unlimited. When you enter a number, you can qualify it with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)
  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The IssueWarningQuota value must be less than or equal to the ProhibitSendReceiveQuota value.

This setting applies to all mailboxes in the database that don't have their own warning quota configured. The default value is 1.899 gigabytes (2,039,480,320 bytes).

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-IsSuspendedFromProvisioning

The IsSuspendedFromProvisioning parameter specifies whether to exclude the database from the mailbox provisioning load balancer that distributes new mailboxes randomly and evenly across the available databases. Valid values are:

  • $true: Indicates that you don't want the exclusion to be permanent. The database is excluded from new or move mailbox operations when you don't specify the target mailbox database.
  • $false: The database can be used in new or move mailbox operations when you don't specify the target mailbox database. This is the default value.

Note that setting this parameter to the value $true has these additional effects on the database:

  • The IsExcludedFromProvisioningReason parameter requires a value if it doesn't already have one.
  • The unmodifiable IsExcludedFromProvisioningBy property is populated with your user account.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-JournalRecipient

The JournalRecipient parameter specifies the journal recipient to use for per-database journaling for all mailboxes on the database. You can use any value that uniquely identifies the recipient. For example:

  • Name
  • Alias
  • Distinguished name (DN)
  • Canonical DN
  • Email address
  • GUID
Type:RecipientIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MailboxRetention

The MailboxRetention parameter specifies the length of time to keep deleted mailboxes before they are permanently deleted or purged.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Valid values are 00:00:00 to 24855.03:14:07. The default value is 30.00:00:00 (30 days).

Type:EnhancedTimeSpan
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MaintenanceSchedule

This parameter is functional only in Exchange Server 2010.

The MaintenanceSchedule parameter specifies when maintenance will be performed on the mailbox database. Maintenance includes online defragmentation, removing items that have passed their retention period, removing unused indexes and other cleanup tasks.

The syntax for this parameter is: StartDay.Hour:Minute [AM | PM]-EndDay.Hour:Minute [AM | PM].

You can use the following values for days:

  • Full name of the day.
  • Abbreviated name of the day.
  • Integer from 0 through 6, where 0 = Sunday.

You can enter the time in 24 hour format and omit the AM/PM value. If you enter the time in 12 time hour format, include a space between the time and the AM/PM value.

You can mix and match date/time formats.

The start time and end time must be at least 15 minutes apart. Minutes are rounded down to 0, 15, 30, or 45.

Here are some examples:

  • "Sun.11:30 PM-Mon.1:30 AM"
  • "6.22:00-6.22:15" (Run from Saturday at 10:00 PM until Saturday at 10:15 PM.)
  • "Sun.1:15 AM-Monday.23:00"
Type:Schedule
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-MetaCacheDatabaseMaxCapacityInBytes

The MetaCacheDatabaseMaxCapacityInBytes parameter specifies the size of the metacache database in bytes. To convert gigabytes to bytes, multiply the value by 1024^3. For terabytes to bytes, multiply by 1024^4.

The default value is blank ($null).

Type:Int64
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2019

-MountAtStartup

The MountAtStartup parameter specifies whether to mount the mailbox database when the Microsoft Exchange Information Store service starts. Valid values are:

  • $true: The database is mounted when the service starts. This is the default value.
  • $false: The database isn't mounted when the service starts.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-Name

The Name parameter specifies the unique name of the mailbox database. The maximum length is 64 characters. If the value contains spaces, enclose the value in quotation marks (").

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-OfflineAddressBook

The OfflineAddressBook parameter specifies the offline address book that's associated with the mailbox database. You can use any value that uniquely identifies the offline address book. For example:

  • Name
  • Distinguished name (DN)
  • GUID

By default, this setting is blank ($null).

Type:OfflineAddressBookIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ProhibitSendQuota

The ProhibitSendQuota parameter specifies a size limit for the mailbox. If the mailbox reaches or exceeds this size, the mailbox can't send new messages, and the user receives a descriptive warning message.

A valid value is a number up to 1.999999999 terabytes (2199023254528 bytes) or the value unlimited. When you enter a number, you can qualify it with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)
  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The ProhibitSendQuota value must be less than or equal to the ProhibitSendReceiveQuota value.

This settings applies to all mailboxes in the database that don't have their own prohibit send quota configured. The default value is 2 gigabytes (2147483648 bytes).

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-ProhibitSendReceiveQuota

The ProhibitSendReceiveQuota parameter specifies a size limit for the mailbox. If the mailbox reaches or exceeds this size, the mailbox can't send or receive new messages. Messages sent to the mailbox are returned to the sender with a descriptive error message. This value effectively determines the maximum size of the mailbox.

A valid value is a number up to 1.999999999 terabytes (2199023254528 bytes) or the value unlimited. When you enter a number, you can qualify it with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)
  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value must be greater than or equal to the ProhibitSendQuota or IssueWarningQuota values.

This setting applies to all mailboxes in the database that don't have their own prohibit send receive quota configured. The default value is 2.99804 gigabytes (2469396480 bytes)

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-PublicFolderDatabase

This parameter is functional only in Exchange Server 2010.

The PublicFolderDatabase parameter specifies the associated public folder database for this mailbox database. You can use any value that uniquely identifies the public folder database. For example:

  • Name
  • Distinguished name (DN)
  • GUID
Type:DatabaseIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-QuotaNotificationSchedule

This parameter is functional only in Exchange Server 2010.

The QuotaNotificationSchedule parameter specifies when quota messages are sent to mailboxes that have reached one of the quota values.

The syntax for this parameter is: StartDay.Hour:Minute [AM | PM]-EndDay.Hour:Minute [AM | PM].

You can use the following values for days:

  • Full name of the day.
  • Abbreviated name of the day.
  • Integer from 0 through 6, where 0 = Sunday.

You can enter the time in 24 hour format and omit the AM/PM value. If you enter the time in 12 time hour format, include a space between the time and the AM/PM value.

You can mix and match date/time formats.

The start time and end time must be at least 15 minutes apart. Minutes are rounded down to 0, 15, 30, or 45.

Here are some examples:

  • "Sun.11:30 PM-Mon.1:30 AM"
  • "6.22:00-6.22:15" (Run from Saturday at 10:00 PM until Saturday at 10:15 PM.)
  • "Sun.1:15 AM-Monday.23:00"
Type:Schedule
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-RecoverableItemsQuota

The RecoverableItemsQuota parameter specifies the maximum size for the Recoverable Items folder of the mailbox. If the Recoverable Items folder reaches or exceeds this size, it no longer accepts messages.

A valid value is a number up to 1.999999999 terabytes (2199023254528 bytes) or the value unlimited. The default value is 30 gigabytes (32212254720 bytes).

When you enter a number, you can qualify it with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)
  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The RecoverableItemsQuota value must be greater than or equal to the RecoverableItemsWarningQuota value.

This settings applies to all mailboxes in the database that don't have their own Recoverable Items quota configured.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-RecoverableItemsWarningQuota

The RecoverableItemsWarningQuota parameter specifies the warning threshold for the size of the Recoverable Items folder for the mailbox. If the Recoverable Items folder reaches or exceeds this size, Exchange logs an event to the application event log.

A valid value is a number up to 1.999999999 terabytes (2199023254528 bytes) or the value unlimited. The default value is 20 gigabytes (21474836480 bytes).

When you enter a number, you can qualify it with one of the following units:

  • B (bytes)
  • KB (kilobytes)
  • MB (megabytes)
  • GB (gigabytes)
  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The RecoverableItemsWarningQuota value must be less than or equal to the RecoverableItemsQuota value.

This settings applies to all mailboxes in the database that don't have their own Recoverable Items warning quota configured.

Type:Unlimited
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-RetainDeletedItemsUntilBackup

The RetainDeletedItemsUntilBackup parameter specifies whether to keep items in the Recoverable Items\Deletions folder of the mailbox until the next database backup occurs. Valid values are:

  • $true: Deleted items in mailboxes are kept until the next mailbox database backup. This value could effectively override the deleted DeletedItemRetention and RecoverableItemsQuota parameter values.
  • $false: This is the default value. Retention of deleted items in mailboxes is controlled by the DeletedItemRetention and RecoverableItemsQuota parameters.

This settings applies to all mailboxes in the database that don't have their own RetainDeletedItemsUntilBackup value configured.

For more information, see Recoverable Items folder in Exchange Server.

Note: If you set the value of this parameter to $true when the value of the UseDatabaseRetentionDefaults parameter on a specific mailbox is also $true (the default value), the value of the UseDatabaseRetentionDefaults property in the output of the Get-Mailbox cmdlet will erroneously appear as False. To verify the value of the UseDatabaseRetentionDefaults property on the mailbox, do the following steps in the Exchange Management Shell:

  • Run the following command: Import-Module ActiveDirectory.
  • Replace <Alias> with the Alias value of the mailbox, and run the following command: Get-ADUser <Alias> -Properties mDBUseDefaults | Format-List mDBUseDefaults.
Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

-RpcClientAccessServer

This parameter is functional only in Exchange Server 2010.

The RpcClientAccessServer parameter specifies the Client Access server or Client Access server array through which RPC clients (for example, Microsoft Office Outlook 2007 clients) access their mailboxes. This feature is supported for all versions of Outlook.

When connecting with Outlook 2003 clients, RPC encryption is disabled by default. Unless RPC encryption is enabled on Outlook 2003 or disabled on the server, Outlook 2003 clients won't be able to connect. For more information, see Understanding RPC Client Access.

Type:ClientAccessServerOrArrayIdParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010

-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019

Inputs

Input types

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

Output types

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.