Sdílet prostřednictvím


Configure diagnostic logging in SharePoint Server

APPLIES TO: yes-img-132013 yes-img-162016 yes-img-192019 yes-img-seSubscription Edition no-img-sopSharePoint in Microsoft 365

Prerequisites

The user account that is performing procedures from Central Administrationmust be a member of the Farm Administrators SharePoint group.

Diagnostic logging setting best practices

The SharePoint Server environment might require configuration of the diagnostic logging settings after initial deployment, after upgrade, and if a change is made to the environment, such as adding or removing a server. The guidelines in the following list can help you form best practices for the specific environment.

  • Change the drive to which the server writes logs.

    By default, SharePoint Server writes diagnostic logs to the same drive and partition on which it was installed. Because diagnostic logging can use a large amount of drive space and compromise drive performance, you should configure SharePoint Server to write to another drive on which SharePoint Server is not installed. You should also consider the connection speed to the drive on which SharePoint Server writes the logs. If verbose-level logging is configured, the server records a large amount of data. Therefore, a slow connection might result in poor log performance.

  • Restrict log disk space usage.

    By default, the amount of disk space that diagnostic logging can use is unlimited. Therefore, restrict the disk space that logging uses, especially if you configure logging to write verbose-level events. When the disk reaches the restriction, SharePoint Server removes the oldest logs before it records new logging data.

  • Use the Verbose setting sparingly.

    You can configure diagnostic logging to record verbose-level events. This means that SharePoint Server records every action that it takes. Verbose-level logging can quickly use drive space and affect drive and server performance. You can use verbose-level logging to record more detail when you are making critical changes and then reconfigure logging to record only higher-level events after you make the change.

  • Regularly back up logs.

    Diagnostic logs contain important data. Therefore, back up the logs regularly to ensure that this data is preserved. When you restrict log drive space usage, or if you keep logs for only a few days, SharePoint Server automatically deletes log files, starting with the oldest files first, when the threshold is met.

  • Enable event log flooding protection.

    When you enable this setting, SharePoint Server detects repeating events in the Windows event log, and suppresses them until conditions return to a typical state.

You can set the level of diagnostic logging for the event log and for the trace log. This limits the types and amount of information that are written to each log. The following tables define the levels of logging that are available for the event log and trace log.

Event log levels

Level Definition
None
No logging occurs.
Critical
This message type indicates a serious error that has caused a major failure in the solution.
Error
This message type indicates an urgent condition. You should investigate all error events.
Warning
This message type indicates a potential problem or issue that might require attention. You should review and track warning messages for patterns over time.
Information
Information messages do not require any action. However, they can provide valuable data for monitoring the state of your solution.
Verbose
This event log level corresponds to lengthy events or messages.

Trace log levels

Level Definition
None
No trace logs are written.
Unexpected
This level records messages about events that cause solutions to stop processing. When set to this level, the log will include events at the Unexpected, Exception, Assert, and Critical levels.
Monitorable
This level records messages about all unrecoverable events that limit the functionality of the solution but do not stop the application. When set to this level, the log also includes events that the Unexpected setting records.
High
This level records all events that are unexpected but which do not stop the processing of a solution. When set to log at this level, the log also includes all events that the Monitorable setting records.
Medium
When set to this level, the trace log includes all messages except Verbose and VerboseEx messages. This level records all high-level information about operations that were performed. This level provides enough detail to construct the data flow and sequence of operations. Administrators or support professionals could use this level of logging to troubleshoot issues. When set to this level, the log will also include all events that the High setting records.
Verbose
When set to this level, the log includes most actions. Verbose tracing produces many log messages. This level is typically used only for debugging in a development environment. When set to log at this level, the log will also include all events that the Medium setting records.
VerboseEx
This level is only supported by the Set-SPLogLevel PowerShell cmdlet, and includes very low-level diagnostic data. This level should only be used in a development environment. When set to this level, the log includes all events that the Verbose setting records.

Configure diagnostic logging by using Central Administration

You can use the SharePoint Central Administration website to configure diagnostic logging.

To configure diagnostic logging by using Central Administration

  1. In Central Administration, on the home page, click Monitoring.

  2. On the Monitoring page, in the Reporting section, click Configure diagnostic logging.

  3. On the Diagnostic Logging page, in the Event Throttling section, configure event throttling as follows:

    To configure event throttling for all categories:

  4. Select the All Categories check box.

  5. Select the event log level from the Least critical event to report to the event log list.

  6. Select the trace log level from the Least critical event to report to the trace log list.

    To configure event throttling for one or more categories:

  7. Select the check boxes of the categories that you want.

  8. Select the event log level from the Least critical event to report to the event log list.

  9. Select the trace log level from the Least critical event to report to the trace log list.

    To configure event throttling for one or more subcategories (you can expand one or more categories and select any subcategory):

  10. Click the plus (+) next to the category to expand the category.

  11. Select the check box of the subcategory.

  12. Select the event log level from the Least critical event to report to the event log list.

  13. Select the trace log level from the Least critical event to report to the trace log list.

    To return event throttling for all categories to default settings:

  14. Select the All Categories check box.

  15. Select Reset to default from the Least critical event to report to the event log list.

  16. Select Reset to default from the Least critical event to report to the trace log list.

  17. In the Event Log Flood Protection section, select the Enable Event Log Flood Protection check box.

  18. In the Trace Log section, in the Path box, type the path of the folder to which you want logs to be written.

  19. In the Number of days to store log files box, type the number of days (1-366) that you want logs to be kept. After this time, logs will automatically be deleted.

  20. To restrict the disk space that logs can use, select the Restrict Trace Log disk space usage check box, and then type the number gigabytes (GB) you want to restrict log files to. When logs reach this value, older logs will automatically be deleted.

  21. After you have made the changes that you want on the Diagnostic Logging page, click OK.

Configure diagnostic logging by using PowerShell

You can use PowerShell to configure diagnostic logging.

To configure diagnostic logging by using PowerShell

  1. Verify that you have the following memberships:

    • securityadmin fixed server role on the SQL Server instance.

    • db_owner fixed database role on all databases that are to be updated.

    • Administrators group on the server on which you are running the PowerShell cmdlets.

    An administrator can use the Add-SPShellAdmin cmdlet to grant permissions to use PowerShell cmdlets.

    Note

    If you do not have permissions, contact your Setup administrator or SQL Server administrator to request permissions. For additional information about PowerShell permissions, see Add-SPShellAdmin.

  2. From the SharePoint Management Shell, change the drive to which the server writes logs.

  3. At the PowerShell command prompt, type the following command:

    Set-SPDiagnosticConfig -LogLocation D:\DiagnosticLogs
    
  4. To restrict log disk space usage, at the PowerShell command prompt, type the following command:

    Set-SPDiagnosticConfig -LogMaxDiskSpaceUsageEnabled
    

Or assign the maximum disk space for logs:

Set-SPDiagnosticConfig -LogDiskSpaceUsageGB 500
  1. To view the current logging level, at the PowerShell command prompt, type the following command:

    Get-SPLogLevel
    
  2. To change the logging level, at the PowerShell command prompt, type the following command:

    Set-SPLogLevel -TraceSeverity Monitorable
    

To set all categories back to default levels, at the PowerShell command prompt, type the following command, and then press ENTER:

Clear-SPLogLevel
  1. To enable event log flooding protection, at the PowerShell command prompt, type the following command:

    Set-SPDiagnosticConfig -EventLogFloodProtectionEnabled
    

For more information, see Set-SPDiagnosticConfig, Set-SPLogLevel and Get-SPLogLevel.

See also

Concepts

Overview of monitoring in SharePoint Server