Statement Transitions

ODBC statements have the following states.

State	Description
S0	Unallocated statement. (The connection state must be C4, C5, or C6. For more information, see Connection Transitions.)
S1	Allocated statement.
S2	Prepared statement. No result set will be created.
S3	Prepared statement. A (possibly empty) result set will be created.
S4	Statement executed and no result set was created.
S5	Statement executed and a (possibly empty) result set was created. The cursor is open and positioned before the first row of the result set.
S6	Cursor positioned with SQLFetch or SQLFetchScroll.
S7	Cursor positioned with SQLExtendedFetch.
S8	Function needs data. SQLParamData has not been called.
S9	Function needs data. SQLPutData has not been called.
S10	Function needs data. SQLPutData has been called.
S11	Still executing. A statement is left in this state after a function that is executed asynchronously returns SQL_STILL_EXECUTING. A statement is temporarily in this state while any function that accepts a statement handle is executing. Temporary residence in state S11 is not shown in any state tables except the state table for SQLCancel. While a statement is temporarily in state S11, the function can be canceled by calling SQLCancel from another thread.
S12	Asynchronous execution canceled. In S12, an application must call the canceled function until it returns a value other than SQL_STILL_EXECUTING. The function was canceled successfully only if the function returns SQL_ERROR and SQLSTATE HY008 (Operation canceled). If it returns any other value, such as SQL_SUCCESS, the cancel operation failed and the function executed normally.

States S2 and S3 are known as the prepared states, states S5 through S7 as the cursor states, states S8 through S10 as the need data states, and states S11 and S12 as the asynchronous states. In each of these groups, the transitions are shown separately only when they are different for each state in the group; in most cases, the transitions for each state in each a group are the same.

The following tables show how each ODBC function affects the statement state.

SQLAllocHandle

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--[1], [5], [6]	--[5]	--[5]	--[5]	--[5]	--[5]	--[5]
--[2], [5]	--[5]	--[5]	--[5]	--[5]	--[5]	--[5]
S1[3]	--[5]	--[5]	--[5]	--[5]	--[5]	--[5]
--[4], [5]	--[5]	--[5]	--[5]	--[5]	--[5]	--[5]

[1] This row shows transitions when HandleType was SQL_HANDLE_ENV.

[2] This row shows transitions when HandleType was SQL_HANDLE_DBC.

[3] This row shows transitions when HandleType was SQL_HANDLE_STMT.

[4] This row shows transitions when HandleType was SQL_HANDLE_DESC.

[5] Calling SQLAllocHandle with OutputHandlePtr pointing to a valid handle overwrites that handle without regard for the previous contents to that handle and might cause problems for ODBC drivers. It is incorrect ODBC application programming to call SQLAllocHandle twice with the same application variable defined for *OutputHandlePtr without calling SQLFreeHandle to free the handle before reallocating it. Overwriting ODBC handles in such a manner might lead to inconsistent behavior or errors on the part of ODBC drivers.

SQLBindCol

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	--	--	--	--	HY010	HY010

SQLBindParameter

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	--	--	--	--	HY010	HY010

SQLBrowseConnect, SQLConnect, and SQLDriverConnect

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
08002	08002	08002	08002	08002	08002	08002

SQLBulkOperations

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	HY010	24000	See next table	HY010	NS [c] HY010 o

SQLBulkOperations (Cursor States)

S5 Opened	S6 SQLFetch or SQLFetchScroll	S7 SQLExtendedFetch
-- [s] S8 [d] S11 [x]	-- [s] S8 [d] S11 [x]	HY010

SQLCancel

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	--	--	--	--	S1[1] S2 [nr] and [2] S3 [r]and [2] S5[3] and [5] S6([3] or [4]) and [6] S7[4] and [7]	See next table

[1] SQLExecDirect returned SQL_NEED_DATA.

[2] SQLExecute returned SQL_NEED_DATA.

[3] SQLBulkOperations returned SQL_NEED_DATA.

[4] SQLSetPos returned SQL_NEED_DATA.

[5] SQLFetch, SQLFetchScroll, or SQLExtendedFetch had not been called.

[6] SQLFetch or SQLFetchScroll had been called.

[7] SQLExtendedFetch had been called.

SQLCancel (Asynchronous States)

S11 Still executing	S12 Asynch canceled
NS[1] S12[2]	S12

[1] The statement was temporarily in state S11 while a function was executing. SQLCancel was called from a different thread.

[2] The statement was in state S11 because a function called asynchronously returned SQL_STILL_EXECUTING.

SQLCloseCursor

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	24000	24000	24000	S1 [np] S3 [p]	HY010	HY010

SQLColAttribute

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	See next table	24000	-- [s] S11 [x]	HY010	NS [c] HY010 o

SQLColAttribute (Prepared States)

S2 No Results	S3 Results
--[1] 07005[2]	-- [s] S11 x

[1] FieldIdentifier was SQL_DESC_COUNT.

[2] FieldIdentifier was not SQL_DESC_COUNT.

SQLColumnPrivileges, SQLColumns, SQLForeignKeys, SQLGetTypeInfo, SQLPrimaryKeys, SQLProcedureColumns, SQLProcedures, SQLSpecialColumns, SQLStatistics, SQLTablePrivileges, and SQLTables

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
(IH)	S5 [s] S11 [x]	S1 [e] S5 [s] S11 [x]	S1 [e] and [1] S5 [s] and [1] S11 [x] and [1] 24000[2]	See next table	HY010	NS [c] HY010 o

[1] The current result is the last or only result, or there are no current results. For more information about multiple results, see Multiple Results.

[2] The current result is not the last result.

SQLColumnPrivileges, SQLColumns, SQLForeignKeys, SQLGetTypeInfo, SQLPrimaryKeys, SQLProcedureColumns, SQLProcedures, SQLSpecialColumns, SQLStatistics, SQLTablePrivileges, and SQLTables (Cursor States)

S5 Opened	S6 SQLFetch or SQLFetchScroll	S7 SQLExtendedFetch
24000	24000[1]	24000

[1] This error is returned by the Driver Manager if SQLFetch or SQLFetchScroll has not returned SQL_NO_DATA and is returned by the driver if SQLFetch or SQLFetchScroll has returned SQL_NO_DATA.

SQLCopyDesc

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH[1]	--	--	--	--	HY010	NS [c] and [3] HY010 [o] or [4]
IH[2]	HY010	See next table	24000	-- [s] S11 x	HY010	NS [c] and [3] HY010 [o] or [4]

[1] This row shows transitions when the SourceDescHandle argument was an ARD, APD, or IPD.

[2] This row shows transitions when the SourceDescHandle argument was an IRD.

[3] The SourceDescHandle and TargetDescHandle arguments were the same as in the SQLCopyDesc function that is running asynchronously.

[4] Either the SourceDescHandle argument or the TargetDescHandle argument (or both) were different than in the SQLCopyDesc function that is running asynchronously.

SQLCopyDesc (Prepared States)

S2 No Results	S3 Results
24000[1]	-- [s] S11 [x]

[1]This row shows transitions when the SourceDescHandle argument was an IRD.

SQLDataSources and SQLDrivers

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--	--	--	--	--	--	--

SQLDescribeCol

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	See next table	24000	-- [s] S11 [x]	HY010	NS [c] HY010 o

SQLDescribeCol (Prepared States)

S2 No Results	S3 Results
07005	-- [s] S11 [x]

SQLDescribeParam

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	-- [s] S11 [x]	HY010	HY010	HY010	NS [c] HY010 [o]

SQLDisconnect

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--[1]	S0[1]	S0[1]	S0[1]	S0[1]	(HY010)	(HY010)

[1] Calling SQLDisconnect frees all statements associated with the connection. Furthermore, this returns the connection state to C2; the connection state must be C4 before the statement state is S0.

SQLEndTran

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--	--	--[2] or [3] S1[1]	--[3] S1 [np] and ([1] or [2]) S1 [p] and [1] S2 [p] and [2]	--[3] S1 [np] and ([1] or [2]) S1 [p] and [1] S3 [p] and [2]	(HY010)	(HY010)

[1] The CompletionType argument is SQL_COMMIT and SQLGetInfo returns SQL_CB_DELETE for the SQL_CURSOR_COMMIT_BEHAVIOR information type, or the CompletionType argument is SQL_ROLLBACK and SQLGetInfo returns SQL_CB_DELETE for the SQL_CURSOR_ROLLBACK_BEHAVIOR information type.

[2] The CompletionType argument is SQL_COMMIT and SQLGetInfo returns SQL_CB_CLOSE for the SQL_CURSOR_COMMIT_BEHAVIOR information type, or the CompletionType argument is SQL_ROLLBACK and SQLGetInfo returns SQL_CB_CLOSE for the SQL_CURSOR_ROLLBACK_BEHAVIOR information type.

[3] The CompletionType argument is SQL_COMMIT and SQLGetInfo returns SQL_CB_PRESERVE for the SQL_CURSOR_COMMIT_BEHAVIOR information type, or the CompletionType argument is SQL_ROLLBACK and SQLGetInfo returns SQL_CB_PRESERVE for the SQL_CURSOR_ROLLBACK_BEHAVIOR information type.

SQLExecDirect

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
(IH)	S4 [s] and [nr] S5 [s] and [r] S8 [d] S11 [x]	-- [e] and [1] S1 [e] and [2] S4 [s] and [nr] S5 [s] and [r] S8 [d] S11 [x]	-- [e], [1], and [3] S1 [e], [2], and [3] S4 [s], [nr], and [3] S5 [s], [r], and [3] S8 [d] and [3] S11 [x] and [3] 24000 [4]	See next table	HY010	NS [c] HY010 [o]

[1] The error was returned by the Driver Manager.

[2] The error was not returned by the Driver Manager.

[3] The current result is the last or only result, or there are no current results. For more information about multiple results, see Multiple Results.

[4] The current result is not the last result.

SQLExecDirect (Cursor States)

S5 Opened	S6 SQLFetch or SQLFetchScroll	S7 SQLExtendedFetch
24000	24000 [1]	24000

[1] This error is returned by the Driver Manager if SQLFetch or SQLFetchScroll has not returned SQL_NO_DATA, and is returned by the driver if SQLFetch or SQLFetchScroll has returned SQL_NO_DATA.

SQLExecute

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
(IH)	(HY010)	See next table	S2 [e], p, and [1] S4 [s], [p], [nr], and [1] S5 [s], [p], [r], and [1] S8 [d], [p], and [1] S11 [x], [p], and [1] 24000 [p] and [2] HY010 [np]	See cursor states table	HY010	NS [c] HY010 [o]

[1] The current result is the last or only result, or there are no current results. For more information about multiple results, see Multiple Results.

[2] The current result is not the last result.

SQLExecute (Prepared States)

S2 No Results	S3 Results
S4 [s] S8 [d] S11 [x]	S5 [s] S8 [d] S11 [x]

SQLExecute (Cursor States)

S5 Opened	S6 SQLFetch or SQLFetchScroll	S7 SQLExtendedFetch
24000 [p] HY010 [np]	24000 [p], [1] HY010 [np]	24000 [p] HY010 [np]

[1] This error is returned by the Driver Manager if SQLFetch or SQLFetchScroll has not returned SQL_NO_DATA, and is returned by the driver if SQLFetch or SQLFetchScroll has returned SQL_NO_DATA.

SQLExtendedFetch

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	S1010	S1010	24000	See next table	S1010	NS [c] S1010 [o]

SQLExtendedFetch (Cursor States)

S5 Opened	S6 SQLFetch or SQLFetchScroll	S7 SQLExtendedFetch
S7 [s] or [nf] S11 [x]	S1010	-- [s] or [nf] S11 [x]

SQLFetch and SQLFetchScroll

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	HY010	24000	See next table	HY010	NS [c] HY010 [o]

SQLFetch and SQLFetchScroll (Cursor states)

S5 Opened	S6 SQLFetch or SQLFetchScroll	S7 SQLExtendedFetch
S6 [s] or [nf] S11 [x]	-- [s] or [nf] S11 [x]	HY010

SQLFreeHandle

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
-- [1]	HY010	HY010	HY010	HY010	HY010	HY010
IH [2]	S0	S0	S0	S0	HY010	HY010
-- [3]	--	--	--	--	--	--

[1] This row shows transitions when HandleType was SQL_HANDLE_ENV or SQL_HANDLE_DBC.

[2] This row shows transitions when HandleType was SQL_HANDLE_STMT.

[3] This row shows transitions when HandleType was SQL_HANDLE_DESC and the descriptor was explicitly allocated.

SQLFreeStmt

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH [1]	--	--	S1 [np] S2 [p]	S1 [np] S3 [p]	HY010	HY010
IH [2]	--	--	--	--	HY010	HY010

[1] This row shows transitions when Option was SQL_CLOSE.

[2] This row shows transitions when Option was SQL_UNBIND or SQL_RESET_PARAMS. If the Option argument was SQL_DROP and the underlying driver is an ODBC 3*.x* driver, the Driver Manager maps this to a call to SQLFreeHandle with HandleType set to SQL_HANDLE_STMT. For more information, see the transition table for SQLFreeHandle.

SQLGetConnectAttr

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--	--	--	--	--	--	--

SQLGetCursorName

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	--	--	--	--	HY010	HY010

SQLGetData

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	HY010	24000	See next table	HY010	NS [c] HY010 [o]

SQLGetData (Cursor States)

S5 Opened	S6 SQLFetch or SQLFetchScroll	S7 SQLExtendedFetch
24000	-- [s] or [nf] S11 [x] 24000 [b] HY109 [i]	-- [s] or [nf] S11 [x] 24000 [b] HY109 [i]

SQLGetDescField and SQLGetDescRec

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	-- [1] or [2] HY010 [3]	See next table	-- [1] or [2] 24000 [3]	-- [1], [2], or [3] S11 [3] and [x]	HY010	NS [c] or [4] HY010 [o] and [5]

[1] The DescriptorHandle argument was an APD or ARD.

[2] The DescriptorHandle argument was an IPD.

[3] The DescriptorHandle argument was an IRD.

[4] The DescriptorHandle argument was the same as the DescriptorHandle argument in the SQLGetDescField or SQLGetDescRec function that is running asynchronously.

[5] The DescriptorHandle argument was different than the DescriptorHandle argument in the SQLGetDescField or SQLGetDescRec function that is running asynchronously.

SQLGetDescField and SQLGetDescRec (Prepared States)

S2 No Results	S3 Results
--[1], [2], or [3] S11[2] and [x]	--[1], [2], or [3] S11 [x]

[1] The DescriptorHandle argument was an APD or ARD.

[2] The DescriptorHandle argument was an IPD.

[3] The DescriptorHandle argument was an IRD. Note that these functions always return SQL_NO_DATA in state S2 when DescriptorHandle was an IRD.

SQLGetDiagField and SQLGetDiagRec

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--[1]	--	--	--	--	--	--
IH[2]	--[3]	--[3]	--	--	--[3]	--[3]

[1] This row shows transitions when HandleType was SQL_HANDLE_ENV, SQL_HANDLE_DBC, or SQL_HANDLE_DESC.

[2] This row shows transitions when HandleType was SQL_HANDLE_STMT.

[3] SQLGetDiagField always returns an error in this state when DiagIdentifier is SQL_DIAG_ROW_COUNT.

SQLGetEnvAttr

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--	--	--	--	--	--	--

SQLGetFunctions

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--	--	--	--	--	--	--

SQLGetInfo

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--	--	--	--	--	--	--

SQLGetStmtAttr

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	--[1] 24000[2]	--[1] 24000[2]	--[1] 24000[2]	See next table	HY010	HY010

[1] The statement attribute was not SQL_ATTR_ROW_NUMBER.

[2] The statement attribute was SQL_ATTR_ROW_NUMBER.

SQLGetStmtAttr (Cursor States)

S5 Opened	S6 SQLFetch or SQLFetchScroll	S7 SQLExtendedFetch
--[1] 24000[2]	--[1] or ([v] and [2]) 24000 [b] and [2] HY109 [i] and [2]	-- [i] or ([v] and [2]) 24000 [b] and [2] HY109[1] and [2]

[1] The Attribute argument was not SQL_ATTR_ROW_NUMBER.

[2] The Attribute argument was SQL_ATTR_ROW_NUMBER.

SQLMoreResults

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
(IH)	--[1]	--[1]	-- [s] and [2] S1 [nf], [np], and [4] S2 [nf], [p], and [4] S5 [s] and [3] S11 [x]	S1 [nf], [np], and [4] S3 [nf], [p] and [4] S4 [s] and [2] S5 [s] and [3] S11 [x]	HY010	NS [c] HY010 [o]

[1] The function always returns SQL_NO_DATA in this state.

[2] The next result is a row count.

[3] The next result is a result set.

[4] The current result is the last result.

SQLNativeSql

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--	--	--	--	--	--	--

SQLNumParams

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	-- [s] S11 [x]	-- [s] S11 [x]	-- [s] S11 [x]	HY010	NS [c] HY010 [o]

SQLNumResultCols

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	-- [s] S11 [x]	-- [s] S11 [x]	-- [s] S11 [x]	HY010	NS [c] HY010 [o]

SQLParamData

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	HY010	HY010	HY010	See next table	NS [c] HY010 [o]

SQLParamData (Need Data States)

S8 Need Data	S9 Must Put	S10 Can Put
S1 [e] and [1] S2 [e], [nr], and [2] S3 [e], [r], and [2] S5 [e] and [4] S6 [e] and [5] S7 [e] and [3] S9 [d] S11 [x]	HY010	S1 [e] and [1] S2 [e], [nr], and [2] S3 [e], [r], and [2] S4 [s], [nr], and ([1] or [2]) S5 [s], [r], and ([1] or [2]) S5 ([s] or [e]) and [4] S6 ([s] or [e]) and [5] S7 ([s] or [e]) and [3] S9 [d] S11 [x]

[1] SQLExecDirect returned SQL_NEED_DATA.

[2] SQLExecute returned SQL_NEED_DATA.

[3] SQLSetPos had been called from state S7 and returned SQL_NEED_DATA.

[4] SQLBulkOperations had been called from state S5 and returned SQL_NEED_DATA.

[5] SQLSetPos or SQLBulkOperations had been called from state S6 and returned SQL_NEED_DATA.

SQLPrepare

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
(IH)	S2 [s] and [nr] S3 [s] and [r] S11 [x]	-- [s] or ([e] and [1]) S1 [e] and [2] S11 [x]	S1 [e] and [3] S2 [s], [nr], and [3] S3 [s], [r], and [3] S11 [x] and [3] 24000[4]	See next table	HY010	NS [c] HY010 [o]

[1] The preparation fails for a reason other than validating the statement (the SQLSTATE was HY009 [Invalid argument value] or HY090 [Invalid string or buffer length]).

[2] The preparation fails while validating the statement (the SQLSTATE was not HY009 [Invalid argument value] or HY090 [Invalid string or buffer length]).

[3] The current result is the last or only result, or there are no current results. For more information about multiple results, see Multiple Results.

[4] The current result is not the last result.

SQLPrepare (Cursor States)

S5 Opened	S6 SQLFetch or SQLFetchScroll	S7 SQLExtendedFetch
24000	24000	24000

SQLPutData

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	HY010	HY010	HY010	See next table	NS [c] HY010 [o]

SQLPutData (Need Data States)

S8 Need Data	S9 Must Put	S10 Can Put
HY010	S1 [e] and [1] S2 [e], [nr], and [2] S3 [e], [r], and [2] S5 [e] and [4] S6 [e] and [5] S7 [e] and [3] S10 [s] S11 [x]	-- [s] S1 [e] and [1] S2 [e], [nr], and [2] S3 [e], [r], and [2] S5 [e] and [4] S6 [e] and [5] S7 [e] and [3] S11 [x] HY011[6]

[1] SQLExecDirect returned SQL_NEED_DATA.

[2] SQLExecute returned SQL_NEED_DATA.

[3] SQLSetPos had been called from state S7 and returned SQL_NEED_DATA.

[4] SQLBulkOperations had been called from state S5 and returned SQL_NEED_DATA.

[5] SQLSetPos or SQLBulkOperations had been called from state S6 and returned SQL_NEED_DATA.

[6] One or more calls to SQLPutData for a single parameter returned SQL_SUCCESS, and then a call to SQLPutData was made for the same parameter with StrLen_or_Ind set to SQL_NULL_DATA.

SQLRowCount

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
(IH)	(HY010)	(HY010)	--	--	(HY010)	(HY010)

SQLSetConnectAttr

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
--[1]	--	--	--	--[2] 24000[3]	HY010	HY010

[1] This row shows transitions when Attribute was a connection attribute. For transitions when Attribute was a statement attribute, see the statement transition table for SQLSetStmtAttr.

[2] The Attribute argument was not SQL_ATTR_CURRENT_CATALOG.

[3] The Attribute argument was SQL_ATTR_CURRENT_CATALOG.

SQLSetCursorName

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	--	--	24000	24000	HY010	HY010

SQLSetDescField and SQLSetDescRec

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH[1]	--	--	--	--	HY010	HY010

[1] This row shows transitions where the DescriptorHandle argument is an ARD, APD, IPD, or (for SQLSetDescField) an IRD when the FieldIdentifier argument is SQL_DESC_ARRAY_STATUS_PTR or SQL_DESC_ROWS_PROCESSED_PTR. It is an error to call SQLSetDescField for an IRD when FieldIdentifier is any other value.

SQLSetEnvAttr

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
HY011	HY011	HY011	HY011	Y011	HY01	HY011

SQLSetPos

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	HY010	HY010	24000	See next table	HY010	NS [c] HY010 [o]

SQLSetPos (Cursor States)

S5 Opened	S6 SQLFetch or SQLFetchScroll	S7 SQLExtendedFetch
24000	-- [s] S8 [d] S11 [x] 24000 [b] HY109 [i]	-- [s] S8 [d] S11 [x] 24000 [b] HY109 [i]

SQLSetStmtAttr

S0 Unallocated	S1 Allocated	S2-S3 Prepared	S4 Executed	S5-S7 Cursor	S8-S10 Need Data	S11-S12 Async
IH	--	--[1] HY011[2]	--[1] 24000[2]	--[1] 24000[2]	HY010 [np] or [1] HY011 [p] and [2]	HY010 [np] or [1] HY011 [p] and [2]

[1] The Attribute argument was not SQL_ATTR_CONCURRENCY, SQL_ATTR_CURSOR_TYPE, SQL_ATTR_SIMULATE_CURSOR, SQL_ATTR_USE_BOOKMARKS, SQL_ATTR_CURSOR_SCROLLABLE, or SQL_ATTR_CURSOR_SENSITIVITY.

[2] The Attribute argument was SQL_ATTR_CONCURRENCY, SQL_ATTR_CURSOR_TYPE, SQL_ATTR_SIMULATE_CURSOR, SQL_ATTR_USE_BOOKMARKS, SQL_ATTR_CURSOR_SCROLLABLE, or SQL_ATTR_CURSOR_SENSITIVITY.