Upravit

Sdílet prostřednictvím


Database Engine events and errors (26000 to 27999)

This article contains error message numbers (between the range 26,000 and 27,999) and their description, which is the text of the error message from the sys.messages catalog view. Where applicable, the error number is a link to further information.

For the full range of error numbers, see the list on Database Engine events and errors.

You can query the Database Engine to see a full list of all errors, by running the following query against the sys.messages catalog view:

SELECT message_id AS Error,
    severity AS Severity,
    [Event Logged] = CASE is_event_logged
        WHEN 0 THEN 'No' ELSE 'Yes'
        END,
    [text] AS [Description]
FROM sys.messages
WHERE language_id = 1040 /* replace 1040 with the desired language ID, such as 1033 for US English */
ORDER BY message_id;

SQL Server version

This article shows events and errors (between the range 26,000 and 27,999) for SQL Server 2016 (13.x). If you want to view events and errors for other versions of SQL Server, see:

This article shows events and errors (between the range 26,000 and 27,999) for SQL Server 2017 (14.x). If you want to view events and errors for other versions of SQL Server, see:

This article shows events and errors (between the range 26,000 and 27,999) for SQL Server 2019 (15.x). If you want to view events and errors for other versions of SQL Server, see:

This article shows events and errors (between the range 26,000 and 27,999) for SQL Server 2022 (16.x). If you want to view events and errors for other versions of SQL Server, see:

Errors and events (26000 to 27999)

Error Severity Event logged Description
26010 10 Yes The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: %#x. Check certificates to make sure they are valid.
26011 16 Yes The server was unable to initialize encryption because of a problem with a security library. The security library may be missing. Verify that security.dll exists on the system.
26012 16 Yes The server has attempted to initialize SSL encryption when it has already been initialized. This indicates a problem with SQL Server. Contact Technical Support.
26013 10 Yes The certificate [Cert Hash(sha1) "%hs"] was successfully loaded for encryption.
26014 16 Yes Unable to load user-specified certificate [Cert Hash(sha1) "%hs"]. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
26015 16 Yes Unable to load user-specified certificate. Because connection encryption is required, the server will not be able to accept any connections. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
26017 10 Yes Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
26018 10 Yes A self-generated certificate was successfully loaded for encryption.
26022 10 Yes Server is listening on [ %s <%s> %d].
26023 16 Yes Server TCP provider failed to listen on [ %s <%s> %d]. Tcp port is already in use.
26024 16 Yes Server failed to listen on %s <%s> %d. Error: %#x. To proceed, notify your system administrator.
26025 10 Yes HTTP authentication succeeded for user '%.*ls'.%.*ls
26026 14 Yes HTTP authentication failed.%.*ls
26027 10 Yes Virtual Interface Architecture protocol is not supported for this particular edition of SQL Server.
26028 10 Yes Server named pipe provider is ready to accept connection on [ %s ].
26029 16 Yes Server named pipe provider failed to listen on [ %s ]. Error: %#x
26032 10 Yes Server VIA provider is ready for clients to connect to [ %hs:%d ].
26033 16 Yes Server VIA provider failed to initialize. Error: %#x
26034 10 Yes The SQL Server Network Interface library was unable to execute polite termination due to outstanding connections. It will proceed with immediate termination.
26035 16 Yes The SQL Server Network Interface library was unable to close socket handle due to a closesocket failure under memory pressure. Winsock error code: %#x.
26037 10 Yes The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Windows return code: %#x, state: %d. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
26038 10 Yes The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) for the SQL Server service. Error: %#x, state: %d. Administrator should deregister this SPN manually to avoid client authentication errors.
26039 16 Yes The SQL Server Network Interface library was unable to load SPN related library. Error: %#x.
26040 17 Yes Server TCP provider has stopped listening on port [ %d ] due to an AcceptEx failure. Socket error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26041 10 Yes Server TCP provider has successfully reestablished listening on port [ %d ].
26042 17 Yes Server HTTP provider has stopped listening due to a failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26043 10 Yes Server HTTP provider has successfully reestablished listening.
26044 17 Yes Server named pipe provider has stopped listening on [ %s ] due to a failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26045 10 Yes Server named pipe provider has successfully reestablished listening on [ %s ].
26048 10 Yes Server local connection provider is ready to accept connection on [ %s ].
26049 16 Yes Server local connection provider failed to listen on [ %s ]. Error: %#x
26050 17 Yes Server local connection provider has stopped listening on [ %s ] due to a failure. Error: %#x, state: %d. The server will automatically attempt to re-establish listening.
26051 10 Yes Server local connection provider has successfully re-established listening on [ %s ].
26052 10 Yes SQL Server Network Interfaces initialized listeners on node %ld of a multi-node (NUMA) server configuration with node affinity mask 0x%0*I64x. This is an informational message only. No user action is required.
26053 16 Yes SQL Server Network Interfaces failed to initialize listeners on node %ld of a multi-node (NUMA) server configuration with node affinity mask 0x%0*I64x. There may be insufficient memory. Free up additional memory, then turn the node off and on again. If the failure persists repeat this multiple times or restart the SQL Server.
26054 16 Yes Could not find any IP address that this SQL Server instance depends upon. Make sure that the cluster service is running, that the dependency relationship between SQL Server and Network Name resources is correct, and that the IP addresses on which this SQL Server instance depends are available. Error code: %#x.
26055 16 Yes The SQL Server failed to initialize VIA support library [%hs]. This normally indicates the VIA support library does not exist or is corrupted. Please repair or disable the VIA network protocol. Error: %#x.
26056 10 Yes Failed to update the dedicated administrator connection (DAC) port number in the registry. Clients may not be able to discover the correct DAC port through the SQL Server Browser Service. Error: %#x.
26057 16 Yes Failed to determine the fully qualified domain name of the computer while initializing SSL support. This might indicate a problem with the network configuration of the computer. Error: %#x.
26058 16 Yes A TCP provider is enabled, but there are no TCP listening ports configured. The server cannot accept TCP connections.
26059 10 Yes The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ %ls ] for the SQL Server service.
26060 10 Yes The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ %ls ] for the SQL Server service.
26061 10 Yes Failed to determine the fully qualified domain name of the computer while composing the Service Principal Name (SPN). This might indicate a problem with the network configuration of the computer. Error: %#x.
26062 16 Yes Invalid parameter detected while initializing TCP listening port. Error: %#x, state: %d. Contact Technical Support.
26063 10 Yes Warning: Support for the VIA protocol is deprecated and will be removed in a future version of Microsoft SQL Server. If possible, use a different network protocol and disable VIA.
26064 10 Yes SQL Server could not listen on IP address [%s] because the cluster resource '%s' is not online (state = %d). This is an informational message and may indicate that resource '%s' has OR type of dependency on several IP addresses some of which are currently offline or in a failed state. Further action is only required if it is generally possible to bind the IP address of the cluster resource '%s' to a network segment on the current hosting node.
26065 16 Yes Extended Protection for the SQL Server Database Engine is enabled, but the operating system does not support Extended Protection. Connection attempts using Windows Authentication might fail. Check for an operating system service pack to allow for Extended Protection through Service Binding and Channel Binding, or disable Extended Protection for the Database Engine.
26066 16 Yes An error occurred while configuring cluster virtual IP addresses for Extended Protection. Connection attempts using Windows Authentication might fail. Error: %d.
26067 10 Yes The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ %ls ] for the SQL Server service. Windows return code: %#x, state: %d. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
26068 10 Yes The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ %ls ] for the SQL Server service. Error: %#x, state: %d. Administrator should deregister this SPN manually to avoid client authentication errors.
26069 10 Yes Started listening on virtual network name '%ls'. No user action is required.
26070 10 Yes Stopped listening on virtual network name '%ls'. No user action is required.
26071 16 Yes Failed to load the Cluster Resource Libraries: clusapi.dll and resutils.dll. SQL Server will be unable to accept TCP connections on clustered listeners.
26072 10 Yes Found multiple dependent virtual network names for the Windows Failover Cluster Resource '%ls'. SQL Server will only listen on the first virtual network name resource: '%ls'. This may indicate that there is an incorrect configuration of the Windows Failover Cluster Resources for SQL Server.
26073 16 Yes Failed to clean up event associated with TCP connection, this is most likely because the server was under heavy load. Windows return code: %#x
26075 16 Yes Failed to start a listener for virtual network name '%ls'. Error: %d.
26076 10 Yes SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational message. No user action is required.
26077 20 No An asynchronous read has timed out
26078 20 No Client disconnected during login
26079 17 Yes Server TCP provider has stopped listening on port [ %d ] due to a CreateSocket failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26080 10 Yes DISTRIBUTED_NETWORK_NAME is defined for FCI, listen to all IP addresses. No user action is required.
26081 10 Yes DISTRIBUTED_NETWORK_NAME is NOT defined for FCI, listen to VNN IP address. No user action is required.
26082 10 Yes DISTRIBUTED_NETWORK_NAME probing failed for cluster group [ %ls ] with error code %#x.
26083 10 Yes DISTRIBUTED_NETWORK_NAME probing failed with error code %#x.
26084 10 Yes Started listening on listener network name '%ls' (VNN or DISTRIBUTED_NETWORK_NAME). No user action is required.
26085 10 Yes Stopped listening on listener network name '%ls' (VNN or DISTRIBUTED_NETWORK_NAME). No user action is required.
27001 16 No Reserved error message. Should never be issued.
27002 16 No A null or invalid SqlCommand object was supplied to Fuzzy Lookup Table Maintenance by SQLCLR. Reset the connection.
27003 16 No Bad token encountered during tokenization.
27004 16 No Unexpected token type encountered during tokenization.
27005 16 No Error Tolerant Index is corrupt.
27006 16 No Deleted more than one rid from ridlist during delete operation. Error Tolerant Index is corrupt.
27007 16 No Attempt to delete from empty ridlist. Error Tolerant Index is corrupt.
27008 16 No rid to be deleted not found in rid-list. Error Tolerant Index is corrupt.
27009 16 No Error Tolerant Index frequencies must be non-negative. Error Tolerant Index is corrupt.
27010 16 No Attempt to insert row whose ID is already present. Error Tolerant Index is corrupt.
27011 16 No No ridlist provided for appending. Error Tolerant Index is corrupt.
27012 16 No Cannot delete token. Error Tolerant Index is corrupt.
27013 16 No Tokenizer object has no delimiter set. Error Tolerant Index is corrupt.
27014 16 No Deletion failed because token does not occur in index. Error Tolerant Index is corrupt.
27015 16 No Unexpected ridlist length. Error Tolerant Index is corrupt.
27016 16 No Cannot connect to Error Tolerant Index. Bad or missing SqlCommand object.
27017 16 No Failed to drop index on reference table copy.
27018 16 No Could not retrieve metadata from Error Tolerant Index. The index is probably corrupt.
27019 16 No Could not initialize from metadata contained in Error Tolerant Index. The index is probably corrupt.
27022 16 No An error specific to fuzzy lookup table maintenance has occurred.
27023 16 No A system error occurred during execution of fuzzy lookup table maintenance.
27024 16 No Cannot write at negative index position. Could not update Error Tolerant Index. The index is probably corrupt.
27025 16 No Argument is not a valid hex string. Could not initialize from metadata contained in Error Tolerant Index. The index is probably corrupt.
27026 16 No Negative count in Error Tolerant Index metadata. The index is probably corrupt.
27027 16 No Error tolerant index metadata contains unsupported normalization flags. The index is probably corrupt.
27028 16 No Invalid Error Tolerant Index metadata. The index is probably corrupt.
27029 16 No Invalid Error Tolerant Index metadata version.
27030 16 No Missing metadata. The Error Tolerant Index is probably corrupt.
27031 16 No Unable to parse token counts in Error Tolerant Index metadata. The index is probably corrupt.
27032 16 No Error Tolerant Index Metadata string too long. Index is probably corrupt.
27033 16 No Error Tolerant Index Metadata length limit exceeded.
27034 16 No Unexpected end of Error Tolerant Index metadata. Index is probably corrupt.
27037 16 No No table name provided for Error Tolerant Index. The index is probably corrupt.
27038 16 No No input provided for decoding in Error Tolerant Index metadata. Index is probably corrupt.
27039 16 No No input provided for encoding in Error Tolerant Index metadata. Index is probably corrupt.
27040 16 No No Error Tolerant Index metadata string provided for initialization. Index is probably corrupt.
27041 16 No No Error Tolerant Index metadata provided for serialization. The index is probably corrupt.
27042 16 No Could not lookup object_id. No object name provided.
27043 16 No Could not lookup object_id. Null command object provided.
27044 16 No Open connection required. Cannot query Error Tolerant Index.
27045 16 No Cannot write to null output buffer. Could not update Error Tolerant Index. The index is probably corrupt.
27046 16 No Output buffer provided is too small. Could not update Error Tolerant Index. The index is probably corrupt.
27047 16 No The number of min-hash q-grams per token must be positive.
27048 16 No Could not create index on reference table copy.
27049 16 No Reference table (or internal copy) missing integer identity column. Error tolerant index is probably corrupt.
27050 16 No The maximum allow integer identity value has been reached. Consider re-building the error tolerant index to use any gaps in sequence.
27051 16 No Could not read rid from data provided (missing column name, null reader object, or corrupted data). The index is probably corrupted.
27052 16 No Table maintenance insertion failed.
27053 16 No A positive q-gram length is required for tokenization.
27054 16 No Maintenance trigger already installed on this reference table.
27055 16 No Missing extended property on maintenance trigger.
27056 16 No Maintenance trigger name out of sync with Error Tolerant Index metadata. Index is probably corrupt.
27058 16 No A SQL error occurred during execution of fuzzy lookup table maintenance.
27059 16 No Could not lookup object_id. The reference table or maintenance trigger could not be found.
27060 16 No The Error Tolerant Index table name provided is not a valid SQL identifier.
27061 16 No The Error Tolerant Index table name provided refers to a missing table. Check sys.tables.
27062 16 No An auxiliary Fuzzy Lookup table maintenance table is missing.
27063 16 No An auxiliary Fuzzy Lookup table maintenance table name is null. Maintenance cannot proceed.
27064 16 No The row deleted from the reference table could not be located in the reference table copy.
27065 16 No Fuzzy Lookup Table Maintenance is not installed or the Error Tolerant Index is corrupt.
27100 16 No The input parameter, '%ls', cannot be null. Provide a valid value for this parameter.
27101 16 No The value specified for the input parameter, '%ls', is not valid. Provide a valid value for this parameter.
27102 16 No The input parameter, '%ls', cannot be empty. Provide a valid value for this parameter.
27103 16 No Cannot find the execution instance '%I64d' because it does not exist or you do not have sufficient permissions.
27104 16 No Cannot find the folder '%ls' because it does not exist or you do not have sufficient permissions.
27105 16 No Cannot find the operation '%I64d' because it does not exist or you do not have sufficient permissions.
27106 16 No Cannot find the parameter '%ls' because it does not exist.
27107 16 No The specified %ls already exists.
27108 16 No The path for '%ls' cannot be found. The operation will now exit.
27109 16 No Cannot find the project '%ls' because it does not exist or you do not have sufficient permissions.
27110 16 No Default permissions for the project cannot be granted to the user. Make sure that the user can be assigned these permissions.
27111 16 No Cannot find the reference '%I64d' because it is not part of the project or you do not have sufficient permissions.
27112 16 No Unable to update the row in the table, '%ls'. Make sure that this row exists.
27113 16 No Unable to delete one or more rows in the table, '%ls'. Make sure that these rows exist.
27114 16 No Cannot find the reference '%I64d' because it does not exist or you do not have sufficient permissions.
27115 16 No Cannot find the target folder '%ls' because it does not exist or you do not have sufficient permissions.
27116 16 No Conversion failed while performing encryption.
27117 16 No Failed to decrypt the project. The symmetric key that was used to encrypt it may have been deleted. Delete the project and deploy it again.
27118 16 No Failed to deploy the project. Try again later.
27119 16 No Failed to encrypt the project named '%ls'. The symmetric key may have been deleted. Delete the project and deploy it again.
27120 16 No Failed to grant permission '%ls'.
27121 16 No The project is currently running or has completed. An instance of execution can only be started once.
27122 16 No Unable to perform impact analysis and lineage. The package data or configuration data might not be valid. To validate package data, open the package in Business Intelligence Development Studio. To validate configuration data, open the configuration XML file in an XML editor.
27123 16 No The operation cannot be started by an account that uses SQL Server Authentication. Start the operation with an account that uses Windows Authentication.
27124 16 No Integration Services server cannot stop the operation. The specified operation with ID '%I64d' is not valid or is not running.
27125 16 No Integration Services server cannot stop the operation. The specified operation is not in a consistent state and cannot be stopped.
27126 16 No Integration Services server cannot stop the operation. The specified operation is already in Stopping state.
27127 16 No The Integration Services catalog '%ls' does not exists.
27128 16 No The name '%ls' is not valid. It consists of characters that are not allowed.
27129 16 No The folder '%ls' already exists or you have not been granted the appropriate permissions to change it.
27130 16 No Integration Services server was unable to impersonate the caller. Windows returned error code: %ls.
27131 16 No Integration Services server was unable to start the process, '%ls'. Windows returned error code: %ls.
27132 16 No Integration Services server was unable to create process component, '%ls'. Windows returned error code: %ls.
27133 16 No Integration Services server was unable to wait for process, '%ls', to finish. Windows returned error code: %ls.
27135 16 No The database, '%ls', already exists. Rename or remove the existing database, and then run SQL Server Setup again.
27136 16 No The required components for the 32-bit edition of Integration Services cannot be found. Run SQL Server Setup to add the required components.
27137 16 No The registry key for the system setting '%ls' could not be found. The operation will now exit.
27138 16 No The input parameter cannot be null. Provide a valid value for the parameter.
27139 16 No Integration Services server cannot be configured because there are active operations. Wait until there are no active operations, and then try to configure the server again.
27140 16 No The operation cannot be started because the user is not a member of the database role, '%ls', or the server role, '%ls'. Log in as a member of one of these roles, and then try to start the operation again.
27141 16 No Integration Services server cannot be configured because there are execution logs. Please cleanup all execution logs, and then try to configure the server again.
27142 16 No '%ls' is not a valid environment name. It consists of characters that are not allowed.
27143 16 No Cannot access the operation with ID, '%I64d'. Verify that the user has appropriate permissions.
27145 16 No '%ls' is not a valid project name. It consists of characters that are not allowed.
27146 16 No Cannot access the package or the package does not exist. Verify that the package exists and that the user has permissions to it.
27147 16 No The data type of the input value is not compatible with the data type of the '%ls'.
27148 16 No The data type of the parameter does not match the data type of the environment variable.
27149 16 No Integration Services server cannot perform the requested operation on the specified package now, because the package is in pending state. Wait until the package is not in pending state, and try to perform the operation again.
27150 16 No The version of the project has changed since the instance of the execution has been created. Create a new execution instance and try again.
27151 10 No The restore operation for project '%ls' from version '%I64d' has started.
27152 10 No The restore operation for project '%ls' to version '%I64d' has completed.
27153 16 No Default permissions for the operation cannot be granted to the user. Make sure that the user can be assigned these permissions.
27154 16 No The @sensitive parameter is missing. This parameter is used to indicate if the parameter contains a sensitive value.
27155 16 No Project restore has failed. You cannot restore a project having an object_version_lsn that is the same as the current project.
27156 16 No The Integration Services server property, '%ls', cannot be found. Check the name of the property and try again.
27157 16 No The environment '%ls' already exists or you have not been granted the appropriate permissions to create it.
27158 16 No Error number, %d, occurred in the procedure, '%ls', at line number, %d. The error message was: '%ls' The error level was %d and the state was %d.
27159 16 No Data type of the input value is not supported.
27160 16 No The Stored Procedure, '%ls', failed to run because the Integration Services database (SSISDB) is not in single-user mode. In SQL Server Management Studio, launch Database Properties dialog box for SSISDB, switch to the Options tab, and set the Restrict Access property to single-user mode (SINGLE_USER). Then, try to run the stored procedure again.
27161 10 No Warning: the requested permission has already been granted to the user. The duplicate request will be ignored.
27162 16 No The property, '%ls', cannot be changed because the Integration Services database is not in single-user mode. In Management Studio, in the Database Properties dialog box, set the Restrict Access property to single-user mode. Then, try to change the value of the property again.
27163 16 No The value for the Integration Services server property, '%ls', is not valid. In Management Studio, in the Integration Services Properties dialog box, enter a valid value for this property.
27165 10 No Warning: During startup, the Integration Services server marked operation %I64d (type %d, status %d) as terminated. Please check the operation/event log for operation details.
27166 16 No The installed version of SQL Server does not support the installation of the Integration Services server. Update SQL Server, and then try installing the Integration Services server again.
27167 16 No Failed to change the encryption algorithm to '%ls'. An error occurred while encrypting the environment variables with the '%ls' algorithm.
27168 16 No Failed to change the encryption algorithm to '%ls'. An error occurred while encrypting the parameter values using the '%ls' algorithm.
27169 16 No Failed to create a log entry for the requested operation.
27170 16 No Failed to retrieve the project named '%ls'.
27171 16 No The value specified is not valid. A value of data type '%ls' is required.
27172 16 No The certificate and symmetric key used to encrypt project '%ls' does not exist or you do not have sufficient permissions.
27173 16 No The environment variable '%ls' already exists.
27175 16 No The execution has already completed.
27176 16 No The parameter '%ls' does not exist or you do not have sufficient permissions.
27177 16 No Environment names must be unique. There is already an environment named '%ls'.
27178 16 No Unable to execute the project named '%ls'. You do not have sufficient permissions.
27179 16 No The object version does not match the project id or you do not have sufficient permissions.
27180 16 No %ls is not a valid environment variable name. It consists of characters that are not allowed.
27181 16 No The project '%ls' already exists or you have not been granted the appropriate permissions to access it.
27182 16 No The environment '%s' does not exist or you have not been granted the appropriate permissions to access it.
27183 16 No The environment variable '%ls' does not exist or you have not been granted the appropriate permissions to access it.
27184 16 No In order to execute this package, you need to specify values for the required parameters.
27185 16 No The validation record for ID '%I64d' does not exist or you have not been granted the appropriate permissions to access it.
27186 16 No One or more environment variables could not be found in the referenced environment.
27187 16 No The project does not exist or you have not been granted the appropriate permissions to access it.
27188 16 No Only members of the ssis_admin or sysadmin server roles can create, delete, or rename a catalog folder.
27189 16 No Catalog folder name cannot be NULL or an empty string.
27190 16 No The folder '%ls' already exists or you have not been granted the appropriate permissions to create it.
27191 16 No The '%d' permission is not applicable to objects of type '%d'. Grant, deny, or revoke of this permission is not allowed.
27192 16 No The caller has not been granted the MANAGEPERMISSION permission for the specified object.
27193 16 No SQL Server %ls is required to install Integration Services. It cannot be installed on this version of SQL Server.
27194 16 No Cannot find the project because it does not exist or you do not have sufficient permissions.
27195 16 No The operation failed because the execution timed out.
27196 16 No Failed to delete the folder '%ls' because it is not empty. Only empty folders can be deleted.
27197 16 No The specified %ls %ld does not exist.
27198 16 No Failed to locate records for the specified operation (ID %I64d).
27199 16 No %ls is not a valid folder name. It consists of characters that are not allowed.
27200 16 No The project is missing the specified environment reference.
27201 16 No Values are missing for required parameters in this package. Specify values in order to start the validation.
27202 16 No This project is missing one or more environment references. In order to use environment variables, specify the corresponding environment reference identifier.
27203 16 No Failed to deploy project. For more information, query the operation_messages view for the operation identifier '%I64d'.
27204 16 No Failed to create environment reference. This project already has an reference to the specified environment.
27205 16 No Some of the property values for this parameter are missing.
27206 16 No Failed to deploy project to the folder '%ls'. You do not have sufficient permissions to deploy this project.
27207 16 No Failed to locate one or more variables in the environment '%ls'.
27208 16 No The environment reference '%I64d' is not associated with the project.
27209 16 No Failed to create environment to the folder '%ls'. You do not have sufficient permissions to create this environment.
27210 16 No Conversion failed when converting the %ls to data type %ls.
27212 16 No Data tap can only be added or removed when the execution status is created.
27213 16 No The package path and data flow path ID strings already exist for the execution ID %I64d. Provide package path and data flow path ID strings that are not in the catalog.execution_data_taps view.
27214 16 No The data flow task GUID '%ls' and the data flow path ID string already exist for the execution ID %I64d. Provide a data flow task GUID and a data flow path ID string that are not in the catalog.execution_data_taps view.
27215 16 No The data tap '%I64d' does not exist, or you do not have sufficient permissions to remove it. Provide a valid data tap ID.
27216 16 No The number of rows must be a non-negative value. Specify a valid value.
27217 16 No The logging level '%d' is undefined. Provide one of the following logging levels: 0 (None), 1 (Basic), 2 (Performance), 3 (Verbose), 4 (RuntimeLineage), 100 (Customized).
27218 16 No The Integration Services Server cannot find the running process for execution ID %I64d. Provide a valid execution ID.
27219 16 No Caller does not have permissions to execute the stored procedure.
27220 16 No SSISDB database does not exist. Create the SSISDB database.
27221 16 No Unable to map an environment variable with the sensitive property set to True, to a parameter with the sensitive property set to False. Ensure that the property settings match.
27222 16 No The required components for the 64-bit edition of Integration Services cannot be found. Run SQL Server Setup to install the required components.
27223 16 No Cannot move the project to folder '%ls' due to insufficient permissions.
27224 16 No The parameter value cannot be changed after the execution has been started.
27225 16 No The property cannot be overridden after the execution has been started.
27226 16 No The database principal has granted or denied permissions to catalog objects in the database and cannot be dropped.
27227 16 No The server '%ls' already exists.
27228 16 No The server '%ls' does not exists.
27229 16 No Cannot find the SQL login '%ls'.
27230 16 No Failed to deploy the packages. Try again later.
27231 16 No Failed to deploy packages. For more information, query the operation_messages view for the operation identifier '%I64d'.
27232 16 No Failed to create customized logging level '%ls'. You do not have sufficient permissions to create customized logging level.
27233 16 No Customized logging level name cannot be NULL or an empty string.
27234 16 No '%ls' is not a valid customized logging level name. It consists of characters that are not allowed.
27235 16 No The customized logging level '%ls' already exists.
27236 16 No Failed to delete customized logging level '%ls'. You do not have sufficient permissions to delete customized logging level.
27237 16 No The customized logging level '%ls' does not exist.
27238 16 No Failed to rename customized logging level '%ls' with '%ls'. You do not have sufficient permissions to rename customized logging level.
27239 16 No Failed to update customized logging level '%ls'. You do not have sufficient permissions to update customized logging level.
27240 16 No The value can not be less than zero.
27241 16 No Failed to update logging level '%d'. Provide the value for SERVER_CUSTOMIZED_LOGGING_LEVEL property, as it can not be null or empty for logging level '%d'.
27301 16 Yes Operation is not supported unless all bricks are online. Bring the offline bricks back online, and retry the operation.
27302 16 Yes An internal communication error occurred. Retry the operation.
27303 16 Yes An unexpected error with HRESULT 0x%x occurred while processing backup files. Refer to the SQL Server error log for information about any related errors that were encountered. Address those errors if necessary, and retry the operation.
27304 16 Yes The number of matching backup files (%d) is less than the required number (%d). Copy all the right backup files to the proper backup location, and retry the restore operation.
27305 16 Yes The number of backup files (%d) is greater than the available number of bricks (%d). You must restore backup files on to at least as many bricks as present in the original MatrixDB where the backup was created. Configure a new MatrixDB with enough bricks to match the number of bricks in the original MatrixDB, and retry the operation.
27306 16 Yes No matching backup files were found by any of the bricks. Copy the backup files to the correct backup location, and retry the operation. If the backup files belong to a different family, drop the database and then retry the operation.
27307 16 Yes Brick ID %d has no backup files available. Copy the backup file for the segment to this brick, and retry the operation.
27308 16 Yes SegmentID %d from the archive does not match the segmentID %d from the specified filename on brick %d.
27309 16 Yes Restore recovery failed because a problem was detected with data in a temporary file that is needed for recovery. This error can be caused because of a storage device failure or because the restore checkpoint restart file has been moved or deleted. Retry the last restore operation. If the operation fails again, retry the entire restore sequence.
27310 16 Yes Restore failed because all the backup files did not come from the same backup operation. Retry the restore operation using the backup files from a single backup operation.
27311 16 Yes Restore failed because of an internal communications error. Retry the restore operation after addressing any network issues.
27312 16 Yes Device name '%ls' is not valid in a Matrix Backup/Restore command. The device name contains illegal characters or file name is empty. Retry the command using a valid device name.
27313 16 Yes Restore command is not valid as both Standalone and Matrix archives were found while disambiguating the device name(s). Retry the command after making sure that there is only a Standalone archive or matching Matrix archives.
27314 16 Yes Restore failed because the brick count of %ld is different from the BACKUP GROUP COUNT %ld from the backup file. Make sure that all Matrix backup files are from the same backup operation, or re-configure the brick count of the MatrixDB to match the group count of the MatrixDB where the backup files were created.
27315 16 Yes An unexpected error occurred while executing a Backup/Restore command. Refer to the SQL Server error log for information about any related errors that were encountered. Address those errors if necessary, and retry the operation.
27316 16 Yes Device name '%.*ls' is not a valid MOVE target of a Matrix Restore command. Retry the command using a valid relative path name.
27317 16 Yes The backup files of the RESTORE command do not match with the segments of the existing database. Copy the backup files to the correct backup location, using family GUID if necessary, and retry the restore operation.
27318 16 Yes The backup files of the FULL RESTORE command do not match with the segments of the existing database. Copy the correct backup files to the backup location, using family GUID if necessary, and retry the restore operation or use WITH REPLACE option to overwrite the existing database.
27319 16 Yes The backup type of all the archive segments is not the same. Copy the correct backup files to the backup location, and retry the restore operation.
Error Severity Event logged Description
26010 10 Yes The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: %#x. Check certificates to make sure they are valid.
26011 16 Yes The server was unable to initialize encryption because of a problem with a security library. The security library may be missing. Verify that security.dll exists on the system.
26012 16 Yes The server has attempted to initialize SSL encryption when it has already been initialized. This indicates a problem with SQL Server. Contact Technical Support.
26013 10 Yes The certificate [Cert Hash(sha1) "%hs"] was successfully loaded for encryption.
26014 16 Yes Unable to load user-specified certificate [Cert Hash(sha1) "%hs"]. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
26015 16 Yes Unable to load user-specified certificate. Because connection encryption is required, the server will not be able to accept any connections. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
26017 10 Yes Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
26018 10 Yes A self-generated certificate was successfully loaded for encryption.
26022 10 Yes Server is listening on [ %s <%s> %d].
26023 16 Yes Server TCP provider failed to listen on [ %s <%s> %d]. Tcp port is already in use.
26024 16 Yes Server failed to listen on %s <%s> %d. Error: %#x. To proceed, notify your system administrator.
26025 10 Yes HTTP authentication succeeded for user '%.*ls'.%.*ls
26026 14 Yes HTTP authentication failed.%.*ls
26027 10 Yes Virtual Interface Architecture protocol is not supported for this particular edition of SQL Server.
26028 10 Yes Server named pipe provider is ready to accept connection on [ %s ].
26029 16 Yes Server named pipe provider failed to listen on [ %s ]. Error: %#x
26032 10 Yes Server VIA provider is ready for clients to connect to [ %hs:%d ].
26033 16 Yes Server VIA provider failed to initialize. Error: %#x
26034 10 Yes The SQL Server Network Interface library was unable to execute polite termination due to outstanding connections. It will proceed with immediate termination.
26035 16 Yes The SQL Server Network Interface library was unable to close socket handle due to a closesocket failure under memory pressure. Winsock error code: %#x.
26037 10 Yes The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Windows return code: %#x, state: %d. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
26038 10 Yes The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) for the SQL Server service. Error: %#x, state: %d. Administrator should deregister this SPN manually to avoid client authentication errors.
26039 16 Yes The SQL Server Network Interface library was unable to load SPN related library. Error: %#x.
26040 17 Yes Server TCP provider has stopped listening on port [ %d ] due to an AcceptEx failure. Socket error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26041 10 Yes Server TCP provider has successfully reestablished listening on port [ %d ].
26042 17 Yes Server HTTP provider has stopped listening due to a failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26043 10 Yes Server HTTP provider has successfully reestablished listening.
26044 17 Yes Server named pipe provider has stopped listening on [ %s ] due to a failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26045 10 Yes Server named pipe provider has successfully reestablished listening on [ %s ].
26048 10 Yes Server local connection provider is ready to accept connection on [ %s ].
26049 16 Yes Server local connection provider failed to listen on [ %s ]. Error: %#x
26050 17 Yes Server local connection provider has stopped listening on [ %s ] due to a failure. Error: %#x, state: %d. The server will automatically attempt to re-establish listening.
26051 10 Yes Server local connection provider has successfully re-established listening on [ %s ].
26052 10 Yes SQL Server Network Interfaces initialized listeners on node %ld of a multi-node (NUMA) server configuration with node affinity mask 0x%0*I64x. This is an informational message only. No user action is required.
26053 16 Yes SQL Server Network Interfaces failed to initialize listeners on node %ld of a multi-node (NUMA) server configuration with node affinity mask 0x%0*I64x. There may be insufficient memory. Free up additional memory, then turn the node off and on again. If the failure persists repeat this multiple times or restart the SQL Server.
26054 16 Yes Could not find any IP address that this SQL Server instance depends upon. Make sure that the cluster service is running, that the dependency relationship between SQL Server and Network Name resources is correct, and that the IP addresses on which this SQL Server instance depends are available. Error code: %#x.
26055 16 Yes The SQL Server failed to initialize VIA support library [%hs]. This normally indicates the VIA support library does not exist or is corrupted. Please repair or disable the VIA network protocol. Error: %#x.
26056 10 Yes Failed to update the dedicated administrator connection (DAC) port number in the registry. Clients may not be able to discover the correct DAC port through the SQL Server Browser Service. Error: %#x.
26057 16 Yes Failed to determine the fully qualified domain name of the computer while initializing SSL support. This might indicate a problem with the network configuration of the computer. Error: %#x.
26058 16 Yes A TCP provider is enabled, but there are no TCP listening ports configured. The server cannot accept TCP connections.
26059 10 Yes The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ %ls ] for the SQL Server service.
26060 10 Yes The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ %ls ] for the SQL Server service.
26061 10 Yes Failed to determine the fully qualified domain name of the computer while composing the Service Principal Name (SPN). This might indicate a problem with the network configuration of the computer. Error: %#x.
26062 16 Yes Invalid parameter detected while initializing TCP listening port. Error: %#x, state: %d. Contact Technical Support.
26063 10 Yes Warning: Support for the VIA protocol is deprecated and will be removed in a future version of Microsoft SQL Server. If possible, use a different network protocol and disable VIA.
26064 10 Yes SQL Server could not listen on IP address [%s] because the cluster resource '%s' is not online (state = %d). This is an informational message and may indicate that resource '%s' has OR type of dependency on several IP addresses some of which are currently offline or in a failed state. Further action is only required if it is generally possible to bind the IP address of the cluster resource '%s' to a network segment on the current hosting node.
26065 16 Yes Extended Protection for the SQL Server Database Engine is enabled, but the operating system does not support Extended Protection. Connection attempts using Windows Authentication might fail. Check for an operating system service pack to allow for Extended Protection through Service Binding and Channel Binding, or disable Extended Protection for the Database Engine.
26066 16 Yes An error occurred while configuring cluster virtual IP addresses for Extended Protection. Connection attempts using Integrated Authentication might fail. Error: %d.
26067 10 Yes The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ %ls ] for the SQL Server service. Windows return code: %#x, state: %d. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
26068 10 Yes The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ %ls ] for the SQL Server service. Error: %#x, state: %d. Administrator should deregister this SPN manually to avoid client authentication errors.
26069 10 Yes Started listening on virtual network name '%ls'. No user action is required.
26070 10 Yes Stopped listening on virtual network name '%ls'. No user action is required.
26071 16 Yes Failed to load the Cluster Resource Libraries: clusapi.dll and resutils.dll. SQL Server will be unable to accept TCP connections on clustered listeners.
26072 10 Yes Found multiple dependent virtual network names for the Windows Failover Cluster Resource '%ls'. SQL Server will only listen on the first virtual network name resource: '%ls'. This may indicate that there is an incorrect configuration of the Windows Failover Cluster Resources for SQL Server.
26073 16 Yes Failed to clean up event associated with TCP connection, this is most likely because the server was under heavy load. Operating system return code: %#x
26075 16 Yes Failed to start a listener for virtual network name '%ls'. Error: %d.
26076 10 Yes SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational message. No user action is required.
26077 20 No An asynchronous read has timed out
26078 20 No Client disconnected during login
26079 17 Yes Server TCP provider has stopped listening on port [ %d ] due to a CreateSocket failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26080 10 Yes DISTRIBUTED_NETWORK_NAME is defined for FCI, listen to all IP addresses. No user action is required.
26081 10 Yes DISTRIBUTED_NETWORK_NAME is NOT defined for FCI, listen to VNN IP address. No user action is required.
26082 10 Yes DISTRIBUTED_NETWORK_NAME probing failed for cluster group [ %ls ] with error code %#x.
26083 10 Yes DISTRIBUTED_NETWORK_NAME probing failed with error code %#x.
26084 10 Yes Started listening on listener network name '%ls' (VNN or DISTRIBUTED_NETWORK_NAME). No user action is required.
26085 10 Yes Stopped listening on listener network name '%ls' (VNN or DISTRIBUTED_NETWORK_NAME). No user action is required.
27001 16 No Reserved error message. Should never be issued.
27002 16 No A null or invalid SqlCommand object was supplied to Fuzzy Lookup Table Maintenance by SQLCLR. Reset the connection.
27003 16 No Bad token encountered during tokenization.
27004 16 No Unexpected token type encountered during tokenization.
27005 16 No Error Tolerant Index is corrupt.
27006 16 No Deleted more than one rid from ridlist during delete operation. Error Tolerant Index is corrupt.
27007 16 No Attempt to delete from empty ridlist. Error Tolerant Index is corrupt.
27008 16 No rid to be deleted not found in rid-list. Error Tolerant Index is corrupt.
27009 16 No Error Tolerant Index frequencies must be non-negative. Error Tolerant Index is corrupt.
27010 16 No Attempt to insert row whose ID is already present. Error Tolerant Index is corrupt.
27011 16 No No ridlist provided for appending. Error Tolerant Index is corrupt.
27012 16 No Cannot delete token. Error Tolerant Index is corrupt.
27013 16 No Tokenizer object has no delimiter set. Error Tolerant Index is corrupt.
27014 16 No Deletion failed because token does not occur in index. Error Tolerant Index is corrupt.
27015 16 No Unexpected ridlist length. Error Tolerant Index is corrupt.
27016 16 No Cannot connect to Error Tolerant Index. Bad or missing SqlCommand object.
27017 16 No Failed to drop index on reference table copy.
27018 16 No Could not retrieve metadata from Error Tolerant Index. The index is probably corrupt.
27019 16 No Could not initialize from metadata contained in Error Tolerant Index. The index is probably corrupt.
27022 16 No An error specific to fuzzy lookup table maintenance has occurred.
27023 16 No A system error occurred during execution of fuzzy lookup table maintenance.
27024 16 No Cannot write at negative index position. Could not update Error Tolerant Index. The index is probably corrupt.
27025 16 No Argument is not a valid hex string. Could not initialize from metadata contained in Error Tolerant Index. The index is probably corrupt.
27026 16 No Negative count in Error Tolerant Index metadata. The index is probably corrupt.
27027 16 No Error tolerant index metadata contains unsupported normalization flags. The index is probably corrupt.
27028 16 No Invalid Error Tolerant Index metadata. The index is probably corrupt.
27029 16 No Invalid Error Tolerant Index metadata version.
27030 16 No Missing metadata. The Error Tolerant Index is probably corrupt.
27031 16 No Unable to parse token counts in Error Tolerant Index metadata. The index is probably corrupt.
27032 16 No Error Tolerant Index Metadata string too long. Index is probably corrupt.
27033 16 No Error Tolerant Index Metadata length limit exceeded.
27034 16 No Unexpected end of Error Tolerant Index metadata. Index is probably corrupt.
27037 16 No No table name provided for Error Tolerant Index. The index is probably corrupt.
27038 16 No No input provided for decoding in Error Tolerant Index metadata. Index is probably corrupt.
27039 16 No No input provided for encoding in Error Tolerant Index metadata. Index is probably corrupt.
27040 16 No No Error Tolerant Index metadata string provided for initialization. Index is probably corrupt.
27041 16 No No Error Tolerant Index metadata provided for serialization. The index is probably corrupt.
27042 16 No Could not lookup object_id. No object name provided.
27043 16 No Could not lookup object_id. Null command object provided.
27044 16 No Open connection required. Cannot query Error Tolerant Index.
27045 16 No Cannot write to null output buffer. Could not update Error Tolerant Index. The index is probably corrupt.
27046 16 No Output buffer provided is too small. Could not update Error Tolerant Index. The index is probably corrupt.
27047 16 No The number of min-hash q-grams per token must be positive.
27048 16 No Could not create index on reference table copy.
27049 16 No Reference table (or internal copy) missing integer identity column. Error tolerant index is probably corrupt.
27050 16 No The maximum allow integer identity value has been reached. Consider re-building the error tolerant index to use any gaps in sequence.
27051 16 No Could not read rid from data provided (missing column name, null reader object, or corrupted data). The index is probably corrupted.
27052 16 No Table maintenance insertion failed.
27053 16 No A positive q-gram length is required for tokenization.
27054 16 No Maintenance trigger already installed on this reference table.
27055 16 No Missing extended property on maintenance trigger.
27056 16 No Maintenance trigger name out of sync with Error Tolerant Index metadata. Index is probably corrupt.
27058 16 No A SQL error occurred during execution of fuzzy lookup table maintenance.
27059 16 No Could not lookup object_id. The reference table or maintenance trigger could not be found.
27060 16 No The Error Tolerant Index table name provided is not a valid SQL identifier.
27061 16 No The Error Tolerant Index table name provided refers to a missing table. Check sys.tables.
27062 16 No An auxiliary Fuzzy Lookup table maintenance table is missing.
27063 16 No An auxiliary Fuzzy Lookup table maintenance table name is null. Maintenance cannot proceed.
27064 16 No The row deleted from the reference table could not be located in the reference table copy.
27065 16 No Fuzzy Lookup Table Maintenance is not installed or the Error Tolerant Index is corrupt.
27100 16 No The input parameter, '%ls', cannot be null. Provide a valid value for this parameter.
27101 16 No The value specified for the input parameter, '%ls', is not valid. Provide a valid value for this parameter.
27102 16 No The input parameter, '%ls', cannot be empty. Provide a valid value for this parameter.
27103 16 No Cannot find the execution instance '%I64d' because it does not exist or you do not have sufficient permissions.
27104 16 No Cannot find the folder '%ls' because it does not exist or you do not have sufficient permissions.
27105 16 No Cannot find the operation '%I64d' because it does not exist or you do not have sufficient permissions.
27106 16 No Cannot find the parameter '%ls' because it does not exist.
27107 16 No The specified %ls already exists.
27108 16 No The path for '%ls' cannot be found. The operation will now exit.
27109 16 No Cannot find the project '%ls' because it does not exist or you do not have sufficient permissions.
27110 16 No Default permissions for the project cannot be granted to the user. Make sure that the user can be assigned these permissions.
27111 16 No Cannot find the reference '%I64d' because it is not part of the project or you do not have sufficient permissions.
27112 16 No Unable to update the row in the table, '%ls'. Make sure that this row exists.
27113 16 No Unable to delete one or more rows in the table, '%ls'. Make sure that these rows exist.
27114 16 No Cannot find the reference '%I64d' because it does not exist or you do not have sufficient permissions.
27115 16 No Cannot find the target folder '%ls' because it does not exist or you do not have sufficient permissions.
27116 16 No Conversion failed while performing encryption.
27117 16 No Failed to decrypt the project. The symmetric key that was used to encrypt it may have been deleted. Delete the project and deploy it again.
27118 16 No Failed to deploy the project. Try again later.
27119 16 No Failed to encrypt the project named '%ls'. The symmetric key may have been deleted. Delete the project and deploy it again.
27120 16 No Failed to grant permission '%ls'.
27121 16 No The project is currently running or has completed. An instance of execution can only be started once.
27122 16 No Unable to perform impact analysis and lineage. The package data or configuration data might not be valid. To validate package data, open the package in Business Intelligence Development Studio. To validate configuration data, open the configuration XML file in an XML editor.
27123 16 No The operation cannot be started by an account that uses SQL Server Authentication. Start the operation with an account that uses Integrated Authentication.
27124 16 No Integration Services server cannot stop the operation. The specified operation with ID '%I64d' is not valid or is not running.
27125 16 No Integration Services server cannot stop the operation. The specified operation is not in a consistent state and cannot be stopped.
27126 16 No Integration Services server cannot stop the operation. The specified operation is already in Stopping state.
27127 16 No The Integration Services catalog '%ls' does not exists.
27128 16 No The name '%ls' is not valid. It consists of characters that are not allowed.
27129 16 No The folder '%ls' already exists or you have not been granted the appropriate permissions to change it.
27130 16 No Integration Services server was unable to impersonate the caller. Operating system returned error code: %ls.
27131 16 No Integration Services server was unable to start the process, '%ls'. Operating system returned error code: %ls.
27132 16 No Integration Services server was unable to create process component, '%ls'. Operating system returned error code: %ls.
27133 16 No Integration Services server was unable to wait for process, '%ls', to finish. Operating system returned error code: %ls.
27135 16 No The database, '%ls', already exists. Rename or remove the existing database, and then run SQL Server Setup again.
27136 16 No The required components for the 32-bit edition of Integration Services cannot be found. Run SQL Server Setup to add the required components.
27137 16 No The registry key for the system setting '%ls' could not be found. The operation will now exit.
27138 16 No The input parameter cannot be null. Provide a valid value for the parameter.
27139 16 No Integration Services server cannot be configured because there are active operations. Wait until there are no active operations, and then try to configure the server again.
27140 16 No The operation cannot be started because the user is not a member of the database role, '%ls', or the server role, '%ls'. Log in as a member of one of these roles, and then try to start the operation again.
27141 16 No Integration Services server cannot be configured because there are execution logs. Please cleanup all execution logs, and then try to configure the server again.
27142 16 No '%ls' is not a valid environment name. It consists of characters that are not allowed.
27143 16 No Cannot access the operation with ID, '%I64d'. Verify that the user has appropriate permissions.
27145 16 No '%ls' is not a valid project name. It consists of characters that are not allowed.
27146 16 No Cannot access the package or the package does not exist. Verify that the package exists and that the user has permissions to it.
27147 16 No The data type of the input value is not compatible with the data type of the '%ls'.
27148 16 No The data type of the parameter does not match the data type of the environment variable.
27149 16 No Integration Services server cannot perform the requested operation on the specified package now, because the package is in pending state. Wait until the package is not in pending state, and try to perform the operation again.
27150 16 No The version of the project has changed since the instance of the execution has been created. Create a new execution instance and try again.
27151 10 No The restore operation for project '%ls' from version '%I64d' has started.
27152 10 No The restore operation for project '%ls' to version '%I64d' has completed.
27153 16 No Default permissions for the operation cannot be granted to the user. Make sure that the user can be assigned these permissions.
27154 16 No The @sensitive parameter is missing. This parameter is used to indicate if the parameter contains a sensitive value.
27155 16 No Project restore has failed. You cannot restore a project having an object_version_lsn that is the same as the current project.
27156 16 No The Integration Services server property, '%ls', cannot be found. Check the name of the property and try again.
27157 16 No The environment '%ls' already exists or you have not been granted the appropriate permissions to create it.
27158 16 No Error number, %d, occurred in the procedure, '%ls', at line number, %d. The error message was: '%ls' The error level was %d and the state was %d.
27159 16 No Data type of the input value is not supported.
27160 16 No The Stored Procedure, '%ls', failed to run because the Integration Services database (SSISDB) is not in single-user mode. In SQL Server Management Studio, launch Database Properties dialog box for SSISDB, switch to the Options tab, and set the Restrict Access property to single-user mode (SINGLE_USER). Then, try to run the stored procedure again.
27161 10 No Warning: the requested permission has already been granted to the user. The duplicate request will be ignored.
27162 16 No The property, '%ls', cannot be changed because the Integration Services database is not in single-user mode. In Management Studio, in the Database Properties dialog box, set the Restrict Access property to single-user mode. Then, try to change the value of the property again.
27163 16 No The value for the Integration Services server property, '%ls', is not valid. In Management Studio, in the Integration Services Properties dialog box, enter a valid value for this property.
27165 10 No Warning: During startup, the Integration Services server marked operation %I64d (type %d, status %d) as terminated. Please check the operating system error logs for operation details.
27166 16 No The installed version of SQL Server does not support the installation of the Integration Services server. Update SQL Server, and then try installing the Integration Services server again.
27167 16 No Failed to change the encryption algorithm to '%ls'. An error occurred while encrypting the environment variables with the '%ls' algorithm.
27168 16 No Failed to change the encryption algorithm to '%ls'. An error occurred while encrypting the parameter values using the '%ls' algorithm.
27169 16 No Failed to create a log entry for the requested operation.
27170 16 No Failed to retrieve the project named '%ls'.
27171 16 No The value specified is not valid. A value of data type '%ls' is required.
27172 16 No The certificate and symmetric key used to encrypt project '%ls' does not exist or you do not have sufficient permissions.
27173 16 No The environment variable '%ls' already exists.
27175 16 No The execution has already completed.
27176 16 No The parameter '%ls' does not exist or you do not have sufficient permissions.
27177 16 No Environment names must be unique. There is already an environment named '%ls'.
27178 16 No Unable to execute the project named '%ls'. You do not have sufficient permissions.
27179 16 No The object version does not match the project id or you do not have sufficient permissions.
27180 16 No %ls is not a valid environment variable name. It consists of characters that are not allowed.
27181 16 No The project '%ls' already exists or you have not been granted the appropriate permissions to access it.
27182 16 No The environment '%s' does not exist or you have not been granted the appropriate permissions to access it.
27183 16 No The environment variable '%ls' does not exist or you have not been granted the appropriate permissions to access it.
27184 16 No In order to execute this package, you need to specify values for the required parameters.
27185 16 No The validation record for ID '%I64d' does not exist or you have not been granted the appropriate permissions to access it.
27186 16 No One or more environment variables could not be found in the referenced environment.
27187 16 No The project does not exist or you have not been granted the appropriate permissions to access it.
27188 16 No Only members of the ssis_admin or sysadmin server roles can create, delete, or rename a catalog folder.
27189 16 No Catalog folder name cannot be NULL or an empty string.
27190 16 No The folder '%ls' already exists or you have not been granted the appropriate permissions to create it.
27191 16 No The '%d' permission is not applicable to objects of type '%d'. Grant, deny, or revoke of this permission is not allowed.
27192 16 No The caller has not been granted the MANAGEPERMISSION permission for the specified object.
27193 16 No SQL Server %ls is required to install Integration Services. It cannot be installed on this version of SQL Server.
27194 16 No Cannot find the project because it does not exist or you do not have sufficient permissions.
27195 16 No The operation failed because the execution timed out.
27196 16 No Failed to delete the folder '%ls' because it is not empty. Only empty folders can be deleted.
27197 16 No The specified %ls %ld does not exist.
27198 16 No Failed to locate records for the specified operation (ID %I64d).
27199 16 No %ls is not a valid folder name. It consists of characters that are not allowed.
27200 16 No The project is missing the specified environment reference.
27201 16 No Values are missing for required parameters in this package. Specify values in order to start the validation.
27202 16 No This project is missing one or more environment references. In order to use environment variables, specify the corresponding environment reference identifier.
27203 16 No Failed to deploy project. For more information, query the operation_messages view for the operation identifier '%I64d'.
27204 16 No Failed to create environment reference. This project already has an reference to the specified environment.
27205 16 No Some of the property values for this parameter are missing.
27206 16 No Failed to deploy project to the folder '%ls'. You do not have sufficient permissions to deploy this project.
27207 16 No Failed to locate one or more variables in the environment '%ls'.
27208 16 No The environment reference '%I64d' is not associated with the project.
27209 16 No Failed to create environment to the folder '%ls'. You do not have sufficient permissions to create this environment.
27210 16 No Conversion failed when converting the %ls to data type %ls.
27212 16 No Data tap can only be added or removed when the execution status is created.
27213 16 No The package path and data flow path ID strings already exist for the execution ID %I64d. Provide package path and data flow path ID strings that are not in the catalog.execution_data_taps view.
27214 16 No The data flow task GUID '%ls' and the data flow path ID string already exist for the execution ID %I64d. Provide a data flow task GUID and a data flow path ID string that are not in the catalog.execution_data_taps view.
27215 16 No The data tap '%I64d' does not exist, or you do not have sufficient permissions to remove it. Provide a valid data tap ID.
27216 16 No The number of rows must be a non-negative value. Specify a valid value.
27217 16 No The logging level '%d' is undefined. Provide one of the following logging levels: 0 (None), 1 (Basic), 2 (Performance), 3 (Verbose), 4 (RuntimeLineage), 100 (Customized).
27218 16 No The Integration Services Server cannot find the running process for execution ID %I64d. Provide a valid execution ID.
27219 16 No Caller does not have permissions to execute the stored procedure.
27220 16 No SSISDB database does not exist. Create the SSISDB database.
27221 16 No Unable to map an environment variable with the sensitive property set to True, to a parameter with the sensitive property set to False. Ensure that the property settings match.
27222 16 No The required components for the 64-bit edition of Integration Services cannot be found. Run SQL Server Setup to install the required components.
27223 16 No Cannot move the project to folder '%ls' due to insufficient permissions.
27224 16 No The parameter value cannot be changed after the execution has been started.
27225 16 No The property cannot be overridden after the execution has been started.
27226 16 No The database principal has granted or denied permissions to catalog objects in the database and cannot be dropped.
27227 16 No The server '%ls' already exists.
27228 16 No The server '%ls' does not exists.
27229 16 No Cannot find the SQL login '%ls'.
27230 16 No Failed to deploy the packages. Try again later.
27231 16 No Failed to deploy packages. For more information, query the operation_messages view for the operation identifier '%I64d'.
27232 16 No Failed to create customized logging level '%ls'. You do not have sufficient permissions to create customized logging level.
27233 16 No Customized logging level name cannot be NULL or an empty string.
27234 16 No '%ls' is not a valid customized logging level name. It consists of characters that are not allowed.
27235 16 No The customized logging level '%ls' already exists.
27236 16 No Failed to delete customized logging level '%ls'. You do not have sufficient permissions to delete customized logging level.
27237 16 No The customized logging level '%ls' does not exist.
27238 16 No Failed to rename customized logging level '%ls' with '%ls'. You do not have sufficient permissions to rename customized logging level.
27239 16 No Failed to update customized logging level '%ls'. You do not have sufficient permissions to update customized logging level.
27240 16 No The value can not be less than zero.
27241 16 No Failed to update logging level '%d'. Provide the value for SERVER_CUSTOMIZED_LOGGING_LEVEL property, as it can not be null or empty for logging level '%d'.
27242 16 No Cannot find the cluster execution job instance '%ls' because it does not exist or you do not have sufficient permissions.
27243 16 No Cannot find the cluster worker agent '%ls' because it does not exist or you do not have sufficient permissions.
27246 16 No Cannot find the cluster execution task instance '%ls' because it does not exist or you do not have sufficient permissions.
27251 16 No Cannot add a worker agent to execute the cluster job instance '%ls' because the job is specified for all worker agents.
27252 16 No The Integration Services cluster worker agent '%ls' is disabled.
27255 16 No The job id of the execution is null. Create a job for the execution first and try again.
27256 16 No The event message does not exist.
27257 16 No There is no active worker agent.
27259 16 No Failed to enable worker agent because current SQL Server edition only support limited number of worker agents.
27260 16 No Only members of sysadmin server roles can perform this action.
27261 16 No There is no Scale Out Master installed.
27301 16 Yes Operation is not supported unless all bricks are online. Bring the offline bricks back online, and retry the operation.
27302 16 Yes An internal communication error occurred. Retry the operation.
27303 16 Yes An unexpected error with HRESULT 0x%x occurred while processing backup files. Refer to the SQL Server error log for information about any related errors that were encountered. Address those errors if necessary, and retry the operation.
27304 16 Yes The number of matching backup files (%d) is less than the required number (%d). Copy all the right backup files to the proper backup location, and retry the restore operation.
27305 16 Yes The number of backup files (%d) is greater than the available number of bricks (%d). You must restore backup files on to at least as many bricks as present in the original MatrixDB where the backup was created. Configure a new MatrixDB with enough bricks to match the number of bricks in the original MatrixDB, and retry the operation.
27306 16 Yes No matching backup files were found by any of the bricks. Copy the backup files to the correct backup location, and retry the operation. If the backup files belong to a different family, drop the database and then retry the operation.
27307 16 Yes Brick ID %d has no backup files available. Copy the backup file for the segment to this brick, and retry the operation.
27308 16 Yes SegmentID %d from the archive does not match the segmentID %d from the specified filename on brick %d.
27309 16 Yes Restore recovery failed because a problem was detected with data in a temporary file that is needed for recovery. This error can be caused because of a storage device failure or because the restore checkpoint restart file has been moved or deleted. Retry the last restore operation. If the operation fails again, retry the entire restore sequence.
27310 16 Yes Restore failed because all the backup files did not come from the same backup operation. Retry the restore operation using the backup files from a single backup operation.
27311 16 Yes Restore failed because of an internal communications error. Retry the restore operation after addressing any network issues.
27312 16 Yes Device name '%ls' is not valid in a Matrix Backup/Restore command. The device name contains illegal characters or file name is empty. Retry the command using a valid device name.
27313 16 Yes Restore command is not valid as both Standalone and Matrix archives were found while disambiguating the device name(s). Retry the command after making sure that there is only a Standalone archive or matching Matrix archives.
27314 16 Yes Restore failed because the brick count of %ld is different from the BACKUP GROUP COUNT %ld from the backup file. Make sure that all Matrix backup files are from the same backup operation, or re-configure the brick count of the MatrixDB to match the group count of the MatrixDB where the backup files were created.
27315 16 Yes An unexpected error occurred while executing a Backup/Restore command. Refer to the SQL Server error log for information about any related errors that were encountered. Address those errors if necessary, and retry the operation.
27316 16 Yes Device name '%.*ls' is not a valid MOVE target of a Matrix Restore command. Retry the command using a valid relative path name.
27317 16 Yes The backup files of the RESTORE command do not match with the segments of the existing database. Copy the backup files to the correct backup location, using family GUID if necessary, and retry the restore operation.
27318 16 Yes The backup files of the FULL RESTORE command do not match with the segments of the existing database. Copy the correct backup files to the backup location, using family GUID if necessary, and retry the restore operation or use WITH REPLACE option to overwrite the existing database.
27319 16 Yes The backup type of all the archive segments is not the same. Copy the correct backup files to the backup location, and retry the restore operation.
Error Severity Event logged Description
26010 10 Yes The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: %#x. Check certificates to make sure they are valid.
26011 16 Yes The server was unable to initialize encryption because of a problem with a security library. The security library may be missing. Verify that security.dll exists on the system.
26012 16 Yes The server has attempted to initialize SSL encryption when it has already been initialized. This indicates a problem with SQL Server. Contact Technical Support.
26013 10 Yes The certificate [Cert Hash(sha1) "%hs"] was successfully loaded for encryption.
26014 16 Yes Unable to load user-specified certificate [Cert Hash(sha1) "%hs"]. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
26015 16 Yes Unable to load user-specified certificate. Because connection encryption is required, the server will not be able to accept any connections. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
26017 10 Yes Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
26018 10 Yes A self-generated certificate was successfully loaded for encryption.
26022 10 Yes Server is listening on [ %s <%s> %d].
26023 16 Yes Server TCP provider failed to listen on [ %s <%s> %d]. Tcp port is already in use.
26024 16 Yes Server failed to listen on %s <%s> %d. Error: %#x. To proceed, notify your system administrator.
26025 10 Yes HTTP authentication succeeded for user '%.*ls'.%.*ls
26026 14 Yes HTTP authentication failed.%.*ls
26027 10 Yes Virtual Interface Architecture protocol is not supported for this particular edition of SQL Server.
26028 10 Yes Server named pipe provider is ready to accept connection on [ %s ].
26029 16 Yes Server named pipe provider failed to listen on [ %s ]. Error: %#x
26032 10 Yes Server VIA provider is ready for clients to connect to [ %hs:%d ].
26033 16 Yes Server VIA provider failed to initialize. Error: %#x
26034 10 Yes The SQL Server Network Interface library was unable to execute polite termination due to outstanding connections. It will proceed with immediate termination.
26035 16 Yes The SQL Server Network Interface library was unable to close socket handle due to a closesocket failure under memory pressure. Winsock error code: %#x.
26037 10 Yes The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Windows return code: %#x, state: %d. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
26038 10 Yes The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) for the SQL Server service. Error: %#x, state: %d. Administrator should deregister this SPN manually to avoid client authentication errors.
26039 16 Yes The SQL Server Network Interface library was unable to load SPN related library. Error: %#x.
26040 17 Yes Server TCP provider has stopped listening on port [ %d ] due to an AcceptEx failure. Socket error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26041 10 Yes Server TCP provider has successfully reestablished listening on port [ %d ].
26042 17 Yes Server HTTP provider has stopped listening due to a failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26043 10 Yes Server HTTP provider has successfully reestablished listening.
26044 17 Yes Server named pipe provider has stopped listening on [ %s ] due to a failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26045 10 Yes Server named pipe provider has successfully reestablished listening on [ %s ].
26048 10 Yes Server local connection provider is ready to accept connection on [ %s ].
26049 16 Yes Server local connection provider failed to listen on [ %s ]. Error: %#x
26050 17 Yes Server local connection provider has stopped listening on [ %s ] due to a failure. Error: %#x, state: %d. The server will automatically attempt to re-establish listening.
26051 10 Yes Server local connection provider has successfully re-established listening on [ %s ].
26052 10 Yes SQL Server Network Interfaces initialized listeners on node %ld of a multi-node (NUMA) server configuration with node affinity mask 0x%0*I64x. This is an informational message only. No user action is required.
26053 16 Yes SQL Server Network Interfaces failed to initialize listeners on node %ld of a multi-node (NUMA) server configuration with node affinity mask 0x%0*I64x. There may be insufficient memory. Free up additional memory, then turn the node off and on again. If the failure persists repeat this multiple times or restart the SQL Server.
26054 16 Yes Could not find any IP address that this SQL Server instance depends upon. Make sure that the cluster service is running, that the dependency relationship between SQL Server and Network Name resources is correct, and that the IP addresses on which this SQL Server instance depends are available. Error code: %#x.
26055 16 Yes The SQL Server failed to initialize VIA support library [%hs]. This normally indicates the VIA support library does not exist or is corrupted. Please repair or disable the VIA network protocol. Error: %#x.
26056 10 Yes Failed to update the dedicated administrator connection (DAC) port number in the registry. Clients may not be able to discover the correct DAC port through the SQL Server Browser Service. Error: %#x.
26057 16 Yes Failed to determine the fully qualified domain name of the computer while initializing SSL support. This might indicate a problem with the network configuration of the computer. Error: %#x.
26058 16 Yes A TCP provider is enabled, but there are no TCP listening ports configured. The server cannot accept TCP connections.
26059 10 Yes The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ %ls ] for the SQL Server service.
26060 10 Yes The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ %ls ] for the SQL Server service.
26061 10 Yes Failed to determine the fully qualified domain name of the computer while composing the Service Principal Name (SPN). This might indicate a problem with the network configuration of the computer. Error: %#x.
26062 16 Yes Invalid parameter detected while initializing TCP listening port. Error: %#x, state: %d. Contact Technical Support.
26063 10 Yes Warning: Support for the VIA protocol is deprecated and will be removed in a future version of Microsoft SQL Server. If possible, use a different network protocol and disable VIA.
26064 10 Yes SQL Server could not listen on IP address [%s] because the cluster resource '%s' is not online (state = %d). This is an informational message and may indicate that resource '%s' has OR type of dependency on several IP addresses some of which are currently offline or in a failed state. Further action is only required if it is generally possible to bind the IP address of the cluster resource '%s' to a network segment on the current hosting node.
26065 16 Yes Extended Protection for the SQL Server Database Engine is enabled, but the operating system does not support Extended Protection. Connection attempts using Windows Authentication might fail. Check for an operating system service pack to allow for Extended Protection through Service Binding and Channel Binding, or disable Extended Protection for the Database Engine.
26066 16 Yes An error occurred while configuring cluster virtual IP addresses for Extended Protection. Connection attempts using Integrated Authentication might fail. Error: %d.
26067 10 Yes The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ %ls ] for the SQL Server service. Windows return code: %#x, state: %d. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
26068 10 Yes The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ %ls ] for the SQL Server service. Error: %#x, state: %d. Administrator should deregister this SPN manually to avoid client authentication errors.
26069 10 Yes Started listening on virtual network name '%ls'. No user action is required.
26070 10 Yes Stopped listening on virtual network name '%ls'. No user action is required.
26071 16 Yes Failed to load the Cluster Resource Libraries: clusapi.dll and resutils.dll. SQL Server will be unable to accept TCP connections on clustered listeners.
26072 10 Yes Found multiple dependent virtual network names for the Windows Failover Cluster Resource '%ls'. SQL Server will only listen on the first virtual network name resource: '%ls'. This may indicate that there is an incorrect configuration of the Windows Failover Cluster Resources for SQL Server.
26073 16 Yes Failed to clean up event associated with TCP connection, this is most likely because the server was under heavy load. Operating system return code: %#x
26075 16 Yes Failed to start a listener for virtual network name '%ls'. Error: %d.
26076 10 Yes SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational message. No user action is required.
26077 20 No An asynchronous read has timed out
26078 20 No Client disconnected during login
26079 17 Yes Server TCP provider has stopped listening on port [ %d ] due to a CreateSocket failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26080 10 Yes DISTRIBUTED_NETWORK_NAME is defined for FCI, listen to all IP addresses. No user action is required.
26081 10 Yes DISTRIBUTED_NETWORK_NAME is NOT defined for FCI, listen to VNN IP address. No user action is required.
26082 10 Yes DISTRIBUTED_NETWORK_NAME probing failed for cluster group [ %ls ] with error code %#x.
26083 10 Yes DISTRIBUTED_NETWORK_NAME probing failed with error code %#x.
26084 10 Yes Started listening on listener network name '%ls' (VNN or DISTRIBUTED_NETWORK_NAME). No user action is required.
26085 10 Yes Stopped listening on listener network name '%ls' (VNN or DISTRIBUTED_NETWORK_NAME). No user action is required.
26086 16 Yes A dead session is detected and closed, the connect id is '%ls'. No user action is required.
27001 16 No Reserved error message. Should never be issued.
27002 16 No A null or invalid SqlCommand object was supplied to Fuzzy Lookup Table Maintenance by SQLCLR. Reset the connection.
27003 16 No Bad token encountered during tokenization.
27004 16 No Unexpected token type encountered during tokenization.
27005 16 No Error Tolerant Index is corrupt.
27006 16 No Deleted more than one rid from ridlist during delete operation. Error Tolerant Index is corrupt.
27007 16 No Attempt to delete from empty ridlist. Error Tolerant Index is corrupt.
27008 16 No rid to be deleted not found in rid-list. Error Tolerant Index is corrupt.
27009 16 No Error Tolerant Index frequencies must be non-negative. Error Tolerant Index is corrupt.
27010 16 No Attempt to insert row whose ID is already present. Error Tolerant Index is corrupt.
27011 16 No No ridlist provided for appending. Error Tolerant Index is corrupt.
27012 16 No Cannot delete token. Error Tolerant Index is corrupt.
27013 16 No Tokenizer object has no delimiter set. Error Tolerant Index is corrupt.
27014 16 No Deletion failed because token does not occur in index. Error Tolerant Index is corrupt.
27015 16 No Unexpected ridlist length. Error Tolerant Index is corrupt.
27016 16 No Cannot connect to Error Tolerant Index. Bad or missing SqlCommand object.
27017 16 No Failed to drop index on reference table copy.
27018 16 No Could not retrieve metadata from Error Tolerant Index. The index is probably corrupt.
27019 16 No Could not initialize from metadata contained in Error Tolerant Index. The index is probably corrupt.
27022 16 No An error specific to fuzzy lookup table maintenance has occurred.
27023 16 No A system error occurred during execution of fuzzy lookup table maintenance.
27024 16 No Cannot write at negative index position. Could not update Error Tolerant Index. The index is probably corrupt.
27025 16 No Argument is not a valid hex string. Could not initialize from metadata contained in Error Tolerant Index. The index is probably corrupt.
27026 16 No Negative count in Error Tolerant Index metadata. The index is probably corrupt.
27027 16 No Error tolerant index metadata contains unsupported normalization flags. The index is probably corrupt.
27028 16 No Invalid Error Tolerant Index metadata. The index is probably corrupt.
27029 16 No Invalid Error Tolerant Index metadata version.
27030 16 No Missing metadata. The Error Tolerant Index is probably corrupt.
27031 16 No Unable to parse token counts in Error Tolerant Index metadata. The index is probably corrupt.
27032 16 No Error Tolerant Index Metadata string too long. Index is probably corrupt.
27033 16 No Error Tolerant Index Metadata length limit exceeded.
27034 16 No Unexpected end of Error Tolerant Index metadata. Index is probably corrupt.
27037 16 No No table name provided for Error Tolerant Index. The index is probably corrupt.
27038 16 No No input provided for decoding in Error Tolerant Index metadata. Index is probably corrupt.
27039 16 No No input provided for encoding in Error Tolerant Index metadata. Index is probably corrupt.
27040 16 No No Error Tolerant Index metadata string provided for initialization. Index is probably corrupt.
27041 16 No No Error Tolerant Index metadata provided for serialization. The index is probably corrupt.
27042 16 No Could not lookup object_id. No object name provided.
27043 16 No Could not lookup object_id. Null command object provided.
27044 16 No Open connection required. Cannot query Error Tolerant Index.
27045 16 No Cannot write to null output buffer. Could not update Error Tolerant Index. The index is probably corrupt.
27046 16 No Output buffer provided is too small. Could not update Error Tolerant Index. The index is probably corrupt.
27047 16 No The number of min-hash q-grams per token must be positive.
27048 16 No Could not create index on reference table copy.
27049 16 No Reference table (or internal copy) missing integer identity column. Error tolerant index is probably corrupt.
27050 16 No The maximum allow integer identity value has been reached. Consider re-building the error tolerant index to use any gaps in sequence.
27051 16 No Could not read rid from data provided (missing column name, null reader object, or corrupted data). The index is probably corrupted.
27052 16 No Table maintenance insertion failed.
27053 16 No A positive q-gram length is required for tokenization.
27054 16 No Maintenance trigger already installed on this reference table.
27055 16 No Missing extended property on maintenance trigger.
27056 16 No Maintenance trigger name out of sync with Error Tolerant Index metadata. Index is probably corrupt.
27058 16 No A SQL error occurred during execution of fuzzy lookup table maintenance.
27059 16 No Could not lookup object_id. The reference table or maintenance trigger could not be found.
27060 16 No The Error Tolerant Index table name provided is not a valid SQL identifier.
27061 16 No The Error Tolerant Index table name provided refers to a missing table. Check sys.tables.
27062 16 No An auxiliary Fuzzy Lookup table maintenance table is missing.
27063 16 No An auxiliary Fuzzy Lookup table maintenance table name is null. Maintenance cannot proceed.
27064 16 No The row deleted from the reference table could not be located in the reference table copy.
27065 16 No Fuzzy Lookup Table Maintenance is not installed or the Error Tolerant Index is corrupt.
27100 16 No The input parameter, '%ls', cannot be null. Provide a valid value for this parameter.
27101 16 No The value specified for the input parameter, '%ls', is not valid. Provide a valid value for this parameter.
27102 16 No The input parameter, '%ls', cannot be empty. Provide a valid value for this parameter.
27103 16 No Cannot find the execution instance '%I64d' because it does not exist or you do not have sufficient permissions.
27104 16 No Cannot find the folder '%ls' because it does not exist or you do not have sufficient permissions.
27105 16 No Cannot find the operation '%I64d' because it does not exist or you do not have sufficient permissions.
27106 16 No Cannot find the parameter '%ls' because it does not exist.
27107 16 No The specified %ls already exists.
27108 16 No The path for '%ls' cannot be found. The operation will now exit.
27109 16 No Cannot find the project '%ls' because it does not exist or you do not have sufficient permissions.
27110 16 No Default permissions for the project cannot be granted to the user. Make sure that the user can be assigned these permissions.
27111 16 No Cannot find the reference '%I64d' because it is not part of the project or you do not have sufficient permissions.
27112 16 No Unable to update the row in the table, '%ls'. Make sure that this row exists.
27113 16 No Unable to delete one or more rows in the table, '%ls'. Make sure that these rows exist.
27114 16 No Cannot find the reference '%I64d' because it does not exist or you do not have sufficient permissions.
27115 16 No Cannot find the target folder '%ls' because it does not exist or you do not have sufficient permissions.
27116 16 No Conversion failed while performing encryption.
27117 16 No Failed to decrypt the project. The symmetric key that was used to encrypt it may have been deleted. Delete the project and deploy it again.
27118 16 No Failed to deploy the project. Try again later.
27119 16 No Failed to encrypt the project named '%ls'. The symmetric key may have been deleted. Delete the project and deploy it again.
27120 16 No Failed to grant permission '%ls'.
27121 16 No The project is currently running or has completed. An instance of execution can only be started once.
27122 16 No Unable to perform impact analysis and lineage. The package data or configuration data might not be valid. To validate package data, open the package in Business Intelligence Development Studio. To validate configuration data, open the configuration XML file in an XML editor.
27123 16 No The operation cannot be started by an account that uses SQL Server Authentication. Start the operation with an account that uses Integrated Authentication.
27124 16 No Integration Services server cannot stop the operation. The specified operation with ID '%I64d' is not valid or is not running.
27125 16 No Integration Services server cannot stop the operation. The specified operation is not in a consistent state and cannot be stopped.
27126 16 No Integration Services server cannot stop the operation. The specified operation is already in Stopping state.
27127 16 No The Integration Services catalog '%ls' does not exists.
27128 16 No The name '%ls' is not valid. It consists of characters that are not allowed.
27129 16 No The folder '%ls' already exists or you have not been granted the appropriate permissions to change it.
27130 16 No Integration Services server was unable to impersonate the caller. Operating system returned error code: %ls.
27131 16 No Integration Services server was unable to start the process, '%ls'. Operating system returned error code: %ls.
27132 16 No Integration Services server was unable to create process component, '%ls'. Operating system returned error code: %ls.
27133 16 No Integration Services server was unable to wait for process, '%ls', to finish. Operating system returned error code: %ls.
27135 16 No The database, '%ls', already exists. Rename or remove the existing database, and then run SQL Server Setup again.
27136 16 No The required components for the 32-bit edition of Integration Services cannot be found. Run SQL Server Setup to add the required components.
27137 16 No The registry key for the system setting '%ls' could not be found. The operation will now exit.
27138 16 No The input parameter cannot be null. Provide a valid value for the parameter.
27139 16 No Integration Services server cannot be configured because there are active operations. Wait until there are no active operations, and then try to configure the server again.
27140 16 No The operation cannot be started because the user is not a member of the database role, '%ls', or the server role, '%ls'. Log in as a member of one of these roles, and then try to start the operation again.
27141 16 No Integration Services server cannot be configured because there are execution logs. Please cleanup all execution logs, and then try to configure the server again.
27142 16 No '%ls' is not a valid environment name. It consists of characters that are not allowed.
27143 16 No Cannot access the operation with ID, '%I64d'. Verify that the user has appropriate permissions.
27145 16 No '%ls' is not a valid project name. It consists of characters that are not allowed.
27146 16 No Cannot access the package or the package does not exist. Verify that the package exists and that the user has permissions to it.
27147 16 No The data type of the input value is not compatible with the data type of the '%ls'.
27148 16 No The data type of the parameter does not match the data type of the environment variable.
27149 16 No Integration Services server cannot perform the requested operation on the specified package now, because the package is in pending state. Wait until the package is not in pending state, and try to perform the operation again.
27150 16 No The version of the project has changed since the instance of the execution has been created. Create a new execution instance and try again.
27151 10 No The restore operation for project '%ls' from version '%I64d' has started.
27152 10 No The restore operation for project '%ls' to version '%I64d' has completed.
27153 16 No Default permissions for the operation cannot be granted to the user. Make sure that the user can be assigned these permissions.
27154 16 No The @sensitive parameter is missing. This parameter is used to indicate if the parameter contains a sensitive value.
27155 16 No Project restore has failed. You cannot restore a project having an object_version_lsn that is the same as the current project.
27156 16 No The Integration Services server property, '%ls', cannot be found. Check the name of the property and try again.
27157 16 No The environment '%ls' already exists or you have not been granted the appropriate permissions to create it.
27158 16 No Error number, %d, occurred in the procedure, '%ls', at line number, %d. The error message was: '%ls' The error level was %d and the state was %d.
27159 16 No Data type of the input value is not supported.
27160 16 No The Stored Procedure, '%ls', failed to run because the Integration Services database (SSISDB) is not in single-user mode. In SQL Server Management Studio, launch Database Properties dialog box for SSISDB, switch to the Options tab, and set the Restrict Access property to single-user mode (SINGLE_USER). Then, try to run the stored procedure again.
27161 10 No Warning: the requested permission has already been granted to the user. The duplicate request will be ignored.
27162 16 No The property, '%ls', cannot be changed because the Integration Services database is not in single-user mode. In Management Studio, in the Database Properties dialog box, set the Restrict Access property to single-user mode. Then, try to change the value of the property again.
27163 16 No The value for the Integration Services server property, '%ls', is not valid. In Management Studio, in the Integration Services Properties dialog box, enter a valid value for this property.
27165 10 No Warning: During startup, the Integration Services server marked operation %I64d (type %d, status %d) as terminated. Please check the operating system error logs for operation details.
27166 16 No The installed version of SQL Server does not support the installation of the Integration Services server. Update SQL Server, and then try installing the Integration Services server again.
27167 16 No Failed to change the encryption algorithm to '%ls'. An error occurred while encrypting the environment variables with the '%ls' algorithm.
27168 16 No Failed to change the encryption algorithm to '%ls'. An error occurred while encrypting the parameter values using the '%ls' algorithm.
27169 16 No Failed to create a log entry for the requested operation.
27170 16 No Failed to retrieve the project named '%ls'.
27171 16 No The value specified is not valid. A value of data type '%ls' is required.
27172 16 No The certificate and symmetric key used to encrypt project '%ls' does not exist or you do not have sufficient permissions.
27173 16 No The environment variable '%ls' already exists.
27175 16 No The execution has already completed.
27176 16 No The parameter '%ls' does not exist or you do not have sufficient permissions.
27177 16 No Environment names must be unique. There is already an environment named '%ls'.
27178 16 No Unable to execute the project named '%ls'. You do not have sufficient permissions.
27179 16 No The object version does not match the project id or you do not have sufficient permissions.
27180 16 No %ls is not a valid environment variable name. It consists of characters that are not allowed.
27181 16 No The project '%ls' already exists or you have not been granted the appropriate permissions to access it.
27182 16 No The environment '%s' does not exist or you have not been granted the appropriate permissions to access it.
27183 16 No The environment variable '%ls' does not exist or you have not been granted the appropriate permissions to access it.
27184 16 No In order to execute this package, you need to specify values for the required parameters.
27185 16 No The validation record for ID '%I64d' does not exist or you have not been granted the appropriate permissions to access it.
27186 16 No One or more environment variables could not be found in the referenced environment.
27187 16 No The project does not exist or you have not been granted the appropriate permissions to access it.
27188 16 No Only members of the ssis_admin or sysadmin server roles can create, delete, or rename a catalog folder.
27189 16 No Catalog folder name cannot be NULL or an empty string.
27190 16 No The folder '%ls' already exists or you have not been granted the appropriate permissions to create it.
27191 16 No The '%d' permission is not applicable to objects of type '%d'. Grant, deny, or revoke of this permission is not allowed.
27192 16 No The caller has not been granted the MANAGEPERMISSION permission for the specified object.
27193 16 No SQL Server %ls is required to install Integration Services. It cannot be installed on this version of SQL Server.
27194 16 No Cannot find the project because it does not exist or you do not have sufficient permissions.
27195 16 No The operation failed because the execution timed out.
27196 16 No Failed to delete the folder '%ls' because it is not empty. Only empty folders can be deleted.
27197 16 No The specified %ls %ld does not exist.
27198 16 No Failed to locate records for the specified operation (ID %I64d).
27199 16 No %ls is not a valid folder name. It consists of characters that are not allowed.
27200 16 No The project is missing the specified environment reference.
27201 16 No Values are missing for required parameters in this package. Specify values in order to start the validation.
27202 16 No This project is missing one or more environment references. In order to use environment variables, specify the corresponding environment reference identifier.
27203 16 No Failed to deploy project. For more information, query the operation_messages view for the operation identifier '%I64d'.
27204 16 No Failed to create environment reference. This project already has an reference to the specified environment.
27205 16 No Some of the property values for this parameter are missing.
27206 16 No Failed to deploy project to the folder '%ls'. You do not have sufficient permissions to deploy this project.
27207 16 No Failed to locate one or more variables in the environment '%ls'.
27208 16 No The environment reference '%I64d' is not associated with the project.
27209 16 No Failed to create environment to the folder '%ls'. You do not have sufficient permissions to create this environment.
27210 16 No Conversion failed when converting the %ls to data type %ls.
27212 16 No Data tap can only be added or removed when the execution status is created.
27213 16 No The package path and data flow path ID strings already exist for the execution ID %I64d. Provide package path and data flow path ID strings that are not in the catalog.execution_data_taps view.
27214 16 No The data flow task GUID '%ls' and the data flow path ID string already exist for the execution ID %I64d. Provide a data flow task GUID and a data flow path ID string that are not in the catalog.execution_data_taps view.
27215 16 No The data tap '%I64d' does not exist, or you do not have sufficient permissions to remove it. Provide a valid data tap ID.
27216 16 No The number of rows must be a non-negative value. Specify a valid value.
27217 16 No The logging level '%d' is undefined. Provide one of the following logging levels: 0 (None), 1 (Basic), 2 (Performance), 3 (Verbose), 4 (RuntimeLineage), 100 (Customized).
27218 16 No The Integration Services Server cannot find the running process for execution ID %I64d. Provide a valid execution ID.
27219 16 No Caller does not have permissions to execute the stored procedure.
27220 16 No SSISDB database does not exist. Create the SSISDB database.
27221 16 No Unable to map an environment variable with the sensitive property set to True, to a parameter with the sensitive property set to False. Ensure that the property settings match.
27222 16 No The required components for the 64-bit edition of Integration Services cannot be found. Run SQL Server Setup to install the required components.
27223 16 No Cannot move the project to folder '%ls' due to insufficient permissions.
27224 16 No The parameter value cannot be changed after the execution has been started.
27225 16 No The property cannot be overridden after the execution has been started.
27226 16 No The database principal has granted or denied permissions to catalog objects in the database and cannot be dropped.
27227 16 No The server '%ls' already exists.
27228 16 No The server '%ls' does not exists.
27229 16 No Cannot find the SQL login '%ls'.
27230 16 No Failed to deploy the packages. Try again later.
27231 16 No Failed to deploy packages. For more information, query the operation_messages view for the operation identifier '%I64d'.
27232 16 No Failed to create customized logging level '%ls'. You do not have sufficient permissions to create customized logging level.
27233 16 No Customized logging level name cannot be NULL or an empty string.
27234 16 No '%ls' is not a valid customized logging level name. It consists of characters that are not allowed.
27235 16 No The customized logging level '%ls' already exists.
27236 16 No Failed to delete customized logging level '%ls'. You do not have sufficient permissions to delete customized logging level.
27237 16 No The customized logging level '%ls' does not exist.
27238 16 No Failed to rename customized logging level '%ls' with '%ls'. You do not have sufficient permissions to rename customized logging level.
27239 16 No Failed to update customized logging level '%ls'. You do not have sufficient permissions to update customized logging level.
27240 16 No The value can not be less than zero.
27241 16 No Failed to update logging level '%d'. Provide the value for SERVER_CUSTOMIZED_LOGGING_LEVEL property, as it can not be null or empty for logging level '%d'.
27242 16 No Cannot find the cluster execution job instance '%ls' because it does not exist or you do not have sufficient permissions.
27243 16 No Cannot find the cluster worker agent '%ls' because it does not exist or you do not have sufficient permissions.
27246 16 No Cannot find the cluster execution task instance '%ls' because it does not exist or you do not have sufficient permissions.
27251 16 No Cannot add a worker agent to execute the cluster job instance '%ls' because the job is specified for all worker agents.
27252 16 No The Integration Services cluster worker agent '%ls' is disabled.
27255 16 No The job id of the execution is null. Create a job for the execution first and try again.
27256 16 No The event message does not exist.
27257 16 No There is no active worker agent.
27259 16 No Failed to enable worker agent because current SQL Server edition only support limited number of worker agents.
27260 16 No Only members of sysadmin server roles can perform this action.
27261 16 No There is no Scale Out Master installed.
27303 16 Yes An unexpected error with HRESULT 0x%x occurred while processing backup files. Refer to the SQL Server error log for information about any related errors that were encountered. Address those errors if necessary, and retry the operation.
27308 16 Yes SegmentID %d from the archive does not match the segmentID %d from the specified filename on brick %d.
27801 10 Yes Successfully initialize HPC environment from provider '%ld', device type '%ld' DLL version %ld, and find %ld device(s), %ld of them are used.
27802 16 Yes Failed to initialize HPC environment.
27803 10 Yes Message reported from (%.*s) device on device Id (%I64d), code : %d, message : %.*s .
27804 16 Yes Query failed on HPC device Id (%I64d), with error code %d .
Error Severity Event logged Description
26010 10 Yes The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: %#x. Check certificates to make sure they are valid.
26011 16 Yes The server was unable to initialize encryption because of a problem with a security library. The security library may be missing. Verify that security.dll exists on the system.
26012 16 Yes The server has attempted to initialize SSL encryption when it has already been initialized. This indicates a problem with SQL Server. Contact Technical Support.
26013 10 Yes The certificate [Cert Hash(sha1) "%hs"] was successfully loaded for encryption.
26014 16 Yes Unable to load user-specified certificate [Cert Hash(sha1) "%hs"]. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
26015 16 Yes Unable to load user-specified certificate. Because connection encryption is required, the server will not be able to accept any connections. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
26017 10 Yes Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
26018 10 Yes A self-generated certificate was successfully loaded for encryption.
26022 10 Yes Server is listening on [ %s <%s> %d] accept sockets %d.
26023 16 Yes Server TCP provider failed to listen on [ %s <%s> %d]. Tcp port is already in use.
26024 16 Yes Server failed to listen on %s <%s> %d. Error: %#x. To proceed, notify your system administrator.
26025 10 Yes HTTP authentication succeeded for user '%.*ls'.%.*ls
26026 14 Yes HTTP authentication failed.%.*ls
26027 10 Yes Virtual Interface Architecture protocol is not supported for this particular edition of SQL Server.
26028 10 Yes Server named pipe provider is ready to accept connection on [ %s ].
26029 16 Yes Server named pipe provider failed to listen on [ %s ]. Error: %#x
26032 10 Yes Server VIA provider is ready for clients to connect to [ %hs:%d ].
26033 16 Yes Server VIA provider failed to initialize. Error: %#x
26034 10 Yes The SQL Server Network Interface library was unable to execute polite termination due to outstanding connections. It will proceed with immediate termination.
26035 16 Yes The SQL Server Network Interface library was unable to close socket handle due to a closesocket failure under memory pressure. Winsock error code: %#x.
26037 10 Yes The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Windows return code: %#x, state: %d. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
26038 10 Yes The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) for the SQL Server service. Error: %#x, state: %d. Administrator should deregister this SPN manually to avoid client authentication errors.
26039 16 Yes The SQL Server Network Interface library was unable to load SPN related library. Error: %#x.
26040 17 Yes Server TCP provider has stopped listening on port [ %d ] due to an AcceptEx failure. Socket error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26041 10 Yes Server TCP provider has successfully reestablished listening on port [ %d ].
26042 17 Yes Server HTTP provider has stopped listening due to a failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26043 10 Yes Server HTTP provider has successfully reestablished listening.
26044 17 Yes Server named pipe provider has stopped listening on [ %s ] due to a failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26045 10 Yes Server named pipe provider has successfully reestablished listening on [ %s ].
26048 10 Yes Server local connection provider is ready to accept connection on [ %s ].
26049 16 Yes Server local connection provider failed to listen on [ %s ]. Error: %#x
26050 17 Yes Server local connection provider has stopped listening on [ %s ] due to a failure. Error: %#x, state: %d. The server will automatically attempt to re-establish listening.
26051 10 Yes Server local connection provider has successfully re-established listening on [ %s ].
26052 10 Yes SQL Server Network Interfaces initialized listeners on node %ld of a multi-node (NUMA) server configuration with node affinity mask 0x%0*I64x. This is an informational message only. No user action is required.
26053 16 Yes SQL Server Network Interfaces failed to initialize listeners on node %ld of a multi-node (NUMA) server configuration with node affinity mask 0x%0*I64x. There may be insufficient memory. Free up additional memory, then turn the node off and on again. If the failure persists repeat this multiple times or restart the SQL Server.
26054 16 Yes Could not find any IP address that this SQL Server instance depends upon. Make sure that the cluster service is running, that the dependency relationship between SQL Server and Network Name resources is correct, and that the IP addresses on which this SQL Server instance depends are available. Error code: %#x.
26055 16 Yes The SQL Server failed to initialize VIA support library [%hs]. This normally indicates the VIA support library does not exist or is corrupted. Please repair or disable the VIA network protocol. Error: %#x.
26056 10 Yes Failed to update the dedicated administrator connection (DAC) port number in the registry. Clients may not be able to discover the correct DAC port through the SQL Server Browser Service. Error: %#x.
26057 16 Yes Failed to determine the fully qualified domain name of the computer while initializing SSL support. This might indicate a problem with the network configuration of the computer. Error: %#x.
26058 16 Yes A TCP provider is enabled, but there are no TCP listening ports configured. The server cannot accept TCP connections.
26059 10 Yes The SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [ %ls ] for the SQL Server service.
26060 10 Yes The SQL Server Network Interface library successfully deregistered the Service Principal Name (SPN) [ %ls ] for the SQL Server service.
26061 10 Yes Failed to determine the fully qualified domain name of the computer while composing the Service Principal Name (SPN). This might indicate a problem with the network configuration of the computer. Error: %#x.
26062 16 Yes Invalid parameter detected while initializing TCP listening port. Error: %#x, state: %d. Contact Technical Support.
26063 10 Yes Warning: Support for the VIA protocol is deprecated and will be removed in a future version of Microsoft SQL Server. If possible, use a different network protocol and disable VIA.
26064 10 Yes SQL Server could not listen on IP address [%s] because the cluster resource '%s' is not online (state = %d). This is an informational message and may indicate that resource '%s' has OR type of dependency on several IP addresses some of which are currently offline or in a failed state. Further action is only required if it is generally possible to bind the IP address of the cluster resource '%s' to a network segment on the current hosting node.
26065 16 Yes Extended Protection for the SQL Server Database Engine is enabled, but the operating system does not support Extended Protection. Connection attempts using Windows Authentication might fail. Check for an operating system service pack to allow for Extended Protection through Service Binding and Channel Binding, or disable Extended Protection for the Database Engine.
26066 16 Yes An error occurred while configuring cluster virtual IP addresses for Extended Protection. Connection attempts using Integrated Authentication might fail. Error: %d.
26067 10 Yes The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ %ls ] for the SQL Server service. Windows return code: %#x, state: %d. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
26068 10 Yes The SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [ %ls ] for the SQL Server service. Error: %#x, state: %d. Administrator should deregister this SPN manually to avoid client authentication errors.
26069 10 Yes Started listening on virtual network name '%ls'. No user action is required.
26070 10 Yes Stopped listening on virtual network name '%ls'. No user action is required.
26071 16 Yes Failed to load the Cluster Resource Libraries: clusapi.dll and resutils.dll. SQL Server will be unable to accept TCP connections on clustered listeners.
26072 10 Yes Found multiple dependent virtual network names for the Windows Failover Cluster Resource '%ls'. SQL Server will only listen on the first virtual network name resource: '%ls'. This may indicate that there is an incorrect configuration of the Windows Failover Cluster Resources for SQL Server.
26073 16 Yes Failed to clean up event associated with TCP connection, this is most likely because the server was under heavy load. Operating system return code: %#x
26075 16 Yes Failed to start a listener for virtual network name '%ls'. Error: %d.
26076 10 Yes SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational message. No user action is required.
26077 20 No An asynchronous read has timed out
26078 20 No Client disconnected during login
26079 17 Yes Server TCP provider has stopped listening on port [ %d ] due to a CreateSocket failure. Error: %#x, state: %d. The server will automatically attempt to reestablish listening.
26080 10 Yes DISTRIBUTED_NETWORK_NAME is defined for FCI, listen to all IP addresses. No user action is required.
26081 10 Yes DISTRIBUTED_NETWORK_NAME is NOT defined for FCI, listen to VNN IP address. No user action is required.
26082 10 Yes DISTRIBUTED_NETWORK_NAME probing failed for cluster group [ %ls ] with error code %#x.
26083 10 Yes DISTRIBUTED_NETWORK_NAME probing failed with error code %#x.
26084 10 Yes Started listening on listener network name '%ls' (VNN or DISTRIBUTED_NETWORK_NAME). No user action is required.
26085 10 Yes Stopped listening on listener network name '%ls' (VNN or DISTRIBUTED_NETWORK_NAME). No user action is required.
26086 16 Yes A dead session is detected and closed, the connect id is '%ls'. No user action is required.
26087 16 Yes A Attn token is received, the session id is '%d', No user action is required.
27001 16 No Reserved error message. Should never be issued.
27002 16 No A null or invalid SqlCommand object was supplied to Fuzzy Lookup Table Maintenance by SQLCLR. Reset the connection.
27003 16 No Bad token encountered during tokenization.
27004 16 No Unexpected token type encountered during tokenization.
27005 16 No Error Tolerant Index is corrupt.
27006 16 No Deleted more than one rid from ridlist during delete operation. Error Tolerant Index is corrupt.
27007 16 No Attempt to delete from empty ridlist. Error Tolerant Index is corrupt.
27008 16 No rid to be deleted not found in rid-list. Error Tolerant Index is corrupt.
27009 16 No Error Tolerant Index frequencies must be non-negative. Error Tolerant Index is corrupt.
27010 16 No Attempt to insert row whose ID is already present. Error Tolerant Index is corrupt.
27011 16 No No ridlist provided for appending. Error Tolerant Index is corrupt.
27012 16 No Cannot delete token. Error Tolerant Index is corrupt.
27013 16 No Tokenizer object has no delimiter set. Error Tolerant Index is corrupt.
27014 16 No Deletion failed because token does not occur in index. Error Tolerant Index is corrupt.
27015 16 No Unexpected ridlist length. Error Tolerant Index is corrupt.
27016 16 No Cannot connect to Error Tolerant Index. Bad or missing SqlCommand object.
27017 16 No Failed to drop index on reference table copy.
27018 16 No Could not retrieve metadata from Error Tolerant Index. The index is probably corrupt.
27019 16 No Could not initialize from metadata contained in Error Tolerant Index. The index is probably corrupt.
27022 16 No An error specific to fuzzy lookup table maintenance has occurred.
27023 16 No A system error occurred during execution of fuzzy lookup table maintenance.
27024 16 No Cannot write at negative index position. Could not update Error Tolerant Index. The index is probably corrupt.
27025 16 No Argument is not a valid hex string. Could not initialize from metadata contained in Error Tolerant Index. The index is probably corrupt.
27026 16 No Negative count in Error Tolerant Index metadata. The index is probably corrupt.
27027 16 No Error tolerant index metadata contains unsupported normalization flags. The index is probably corrupt.
27028 16 No Invalid Error Tolerant Index metadata. The index is probably corrupt.
27029 16 No Invalid Error Tolerant Index metadata version.
27030 16 No Missing metadata. The Error Tolerant Index is probably corrupt.
27031 16 No Unable to parse token counts in Error Tolerant Index metadata. The index is probably corrupt.
27032 16 No Error Tolerant Index Metadata string too long. Index is probably corrupt.
27033 16 No Error Tolerant Index Metadata length limit exceeded.
27034 16 No Unexpected end of Error Tolerant Index metadata. Index is probably corrupt.
27037 16 No No table name provided for Error Tolerant Index. The index is probably corrupt.
27038 16 No No input provided for decoding in Error Tolerant Index metadata. Index is probably corrupt.
27039 16 No No input provided for encoding in Error Tolerant Index metadata. Index is probably corrupt.
27040 16 No No Error Tolerant Index metadata string provided for initialization. Index is probably corrupt.
27041 16 No No Error Tolerant Index metadata provided for serialization. The index is probably corrupt.
27042 16 No Could not lookup object_id. No object name provided.
27043 16 No Could not lookup object_id. Null command object provided.
27044 16 No Open connection required. Cannot query Error Tolerant Index.
27045 16 No Cannot write to null output buffer. Could not update Error Tolerant Index. The index is probably corrupt.
27046 16 No Output buffer provided is too small. Could not update Error Tolerant Index. The index is probably corrupt.
27047 16 No The number of min-hash q-grams per token must be positive.
27048 16 No Could not create index on reference table copy.
27049 16 No Reference table (or internal copy) missing integer identity column. Error tolerant index is probably corrupt.
27050 16 No The maximum allow integer identity value has been reached. Consider re-building the error tolerant index to use any gaps in sequence.
27051 16 No Could not read rid from data provided (missing column name, null reader object, or corrupted data). The index is probably corrupted.
27052 16 No Table maintenance insertion failed.
27053 16 No A positive q-gram length is required for tokenization.
27054 16 No Maintenance trigger already installed on this reference table.
27055 16 No Missing extended property on maintenance trigger.
27056 16 No Maintenance trigger name out of sync with Error Tolerant Index metadata. Index is probably corrupt.
27058 16 No A SQL error occurred during execution of fuzzy lookup table maintenance.
27059 16 No Could not lookup object_id. The reference table or maintenance trigger could not be found.
27060 16 No The Error Tolerant Index table name provided is not a valid SQL identifier.
27061 16 No The Error Tolerant Index table name provided refers to a missing table. Check sys.tables.
27062 16 No An auxiliary Fuzzy Lookup table maintenance table is missing.
27063 16 No An auxiliary Fuzzy Lookup table maintenance table name is null. Maintenance cannot proceed.
27064 16 No The row deleted from the reference table could not be located in the reference table copy.
27065 16 No Fuzzy Lookup Table Maintenance is not installed or the Error Tolerant Index is corrupt.
27100 16 No The input parameter, '%ls', cannot be null. Provide a valid value for this parameter.
27101 16 No The value specified for the input parameter, '%ls', is not valid. Provide a valid value for this parameter.
27102 16 No The input parameter, '%ls', cannot be empty. Provide a valid value for this parameter.
27103 16 No Cannot find the execution instance '%I64d' because it does not exist or you do not have sufficient permissions.
27104 16 No Cannot find the folder '%ls' because it does not exist or you do not have sufficient permissions.
27105 16 No Cannot find the operation '%I64d' because it does not exist or you do not have sufficient permissions.
27106 16 No Cannot find the parameter '%ls' because it does not exist.
27107 16 No The specified %ls already exists.
27108 16 No The path for '%ls' cannot be found. The operation will now exit.
27109 16 No Cannot find the project '%ls' because it does not exist or you do not have sufficient permissions.
27110 16 No Default permissions for the project cannot be granted to the user. Make sure that the user can be assigned these permissions.
27111 16 No Cannot find the reference '%I64d' because it is not part of the project or you do not have sufficient permissions.
27112 16 No Unable to update the row in the table, '%ls'. Make sure that this row exists.
27113 16 No Unable to delete one or more rows in the table, '%ls'. Make sure that these rows exist.
27114 16 No Cannot find the reference '%I64d' because it does not exist or you do not have sufficient permissions.
27115 16 No Cannot find the target folder '%ls' because it does not exist or you do not have sufficient permissions.
27116 16 No Conversion failed while performing encryption.
27117 16 No Failed to decrypt the project. The symmetric key that was used to encrypt it may have been deleted. Delete the project and deploy it again.
27118 16 No Failed to deploy the project. Try again later.
27119 16 No Failed to encrypt the project named '%ls'. The symmetric key may have been deleted. Delete the project and deploy it again.
27120 16 No Failed to grant permission '%ls'.
27121 16 No The project is currently running or has completed. An instance of execution can only be started once.
27122 16 No Unable to perform impact analysis and lineage. The package data or configuration data might not be valid. To validate package data, open the package in Business Intelligence Development Studio. To validate configuration data, open the configuration XML file in an XML editor.
27123 16 No The operation cannot be started by an account that uses SQL Server Authentication. Start the operation with an account that uses Integrated Authentication.
27124 16 No Integration Services server cannot stop the operation. The specified operation with ID '%I64d' is not valid or is not running.
27125 16 No Integration Services server cannot stop the operation. The specified operation is not in a consistent state and cannot be stopped.
27126 16 No Integration Services server cannot stop the operation. The specified operation is already in Stopping state.
27127 16 No The Integration Services catalog '%ls' does not exists.
27128 16 No The name '%ls' is not valid. It consists of characters that are not allowed.
27129 16 No The folder '%ls' already exists or you have not been granted the appropriate permissions to change it.
27130 16 No Integration Services server was unable to impersonate the caller. Operating system returned error code: %ls.
27131 16 No Integration Services server was unable to start the process, '%ls'. Operating system returned error code: %ls.
27132 16 No Integration Services server was unable to create process component, '%ls'. Operating system returned error code: %ls.
27133 16 No Integration Services server was unable to wait for process, '%ls', to finish. Operating system returned error code: %ls.
27135 16 No The database, '%ls', already exists. Rename or remove the existing database, and then run SQL Server Setup again.
27136 16 No The required components for the 32-bit edition of Integration Services cannot be found. Run SQL Server Setup to add the required components.
27137 16 No The registry key for the system setting '%ls' could not be found. The operation will now exit.
27138 16 No The input parameter cannot be null. Provide a valid value for the parameter.
27139 16 No Integration Services server cannot be configured because there are active operations. Wait until there are no active operations, and then try to configure the server again.
27140 16 No The operation cannot be started because the user is not a member of the database role, '%ls', or the server role, '%ls'. Log in as a member of one of these roles, and then try to start the operation again.
27141 16 No Integration Services server cannot be configured because there are execution logs. Please cleanup all execution logs, and then try to configure the server again.
27142 16 No '%ls' is not a valid environment name. It consists of characters that are not allowed.
27143 16 No Cannot access the operation with ID, '%I64d'. Verify that the user has appropriate permissions.
27145 16 No '%ls' is not a valid project name. It consists of characters that are not allowed.
27146 16 No Cannot access the package or the package does not exist. Verify that the package exists and that the user has permissions to it.
27147 16 No The data type of the input value is not compatible with the data type of the '%ls'.
27148 16 No The data type of the parameter does not match the data type of the environment variable.
27149 16 No Integration Services server cannot perform the requested operation on the specified package now, because the package is in pending state. Wait until the package is not in pending state, and try to perform the operation again.
27150 16 No The version of the project has changed since the instance of the execution has been created. Create a new execution instance and try again.
27151 10 No The restore operation for project '%ls' from version '%I64d' has started.
27152 10 No The restore operation for project '%ls' to version '%I64d' has completed.
27153 16 No Default permissions for the operation cannot be granted to the user. Make sure that the user can be assigned these permissions.
27154 16 No The @sensitive parameter is missing. This parameter is used to indicate if the parameter contains a sensitive value.
27155 16 No Project restore has failed. You cannot restore a project having an object_version_lsn that is the same as the current project.
27156 16 No The Integration Services server property, '%ls', cannot be found. Check the name of the property and try again.
27157 16 No The environment '%ls' already exists or you have not been granted the appropriate permissions to create it.
27158 16 No Error number, %d, occurred in the procedure, '%ls', at line number, %d. The error message was: '%ls' The error level was %d and the state was %d.
27159 16 No Data type of the input value is not supported.
27160 16 No The Stored Procedure, '%ls', failed to run because the Integration Services database (SSISDB) is not in single-user mode. In SQL Server Management Studio, launch Database Properties dialog box for SSISDB, switch to the Options tab, and set the Restrict Access property to single-user mode (SINGLE_USER). Then, try to run the stored procedure again.
27161 10 No Warning: the requested permission has already been granted to the user. The duplicate request will be ignored.
27162 16 No The property, '%ls', cannot be changed because the Integration Services database is not in single-user mode. In Management Studio, in the Database Properties dialog box, set the Restrict Access property to single-user mode. Then, try to change the value of the property again.
27163 16 No The value for the Integration Services server property, '%ls', is not valid. In Management Studio, in the Integration Services Properties dialog box, enter a valid value for this property.
27165 10 No Warning: During startup, the Integration Services server marked operation %I64d (type %d, status %d) as terminated. Please check the operating system error logs for operation details.
27166 16 No The installed version of SQL Server does not support the installation of the Integration Services server. Update SQL Server, and then try installing the Integration Services server again.
27167 16 No Failed to change the encryption algorithm to '%ls'. An error occurred while encrypting the environment variables with the '%ls' algorithm.
27168 16 No Failed to change the encryption algorithm to '%ls'. An error occurred while encrypting the parameter values using the '%ls' algorithm.
27169 16 No Failed to create a log entry for the requested operation.
27170 16 No Failed to retrieve the project named '%ls'.
27171 16 No The value specified is not valid. A value of data type '%ls' is required.
27172 16 No The certificate and symmetric key used to encrypt project '%ls' does not exist or you do not have sufficient permissions.
27173 16 No The environment variable '%ls' already exists.
27175 16 No The execution has already completed.
27176 16 No The parameter '%ls' does not exist or you do not have sufficient permissions.
27177 16 No Environment names must be unique. There is already an environment named '%ls'.
27178 16 No Unable to execute the project named '%ls'. You do not have sufficient permissions.
27179 16 No The object version does not match the project id or you do not have sufficient permissions.
27180 16 No %ls is not a valid environment variable name. It consists of characters that are not allowed.
27181 16 No The project '%ls' already exists or you have not been granted the appropriate permissions to access it.
27182 16 No The environment '%s' does not exist or you have not been granted the appropriate permissions to access it.
27183 16 No The environment variable '%ls' does not exist or you have not been granted the appropriate permissions to access it.
27184 16 No In order to execute this package, you need to specify values for the required parameters.
27185 16 No The validation record for ID '%I64d' does not exist or you have not been granted the appropriate permissions to access it.
27186 16 No One or more environment variables could not be found in the referenced environment.
27187 16 No The project does not exist or you have not been granted the appropriate permissions to access it.
27188 16 No Only members of the ssis_admin or sysadmin server roles can create, delete, or rename a catalog folder.
27189 16 No Catalog folder name cannot be NULL or an empty string.
27190 16 No The folder '%ls' already exists or you have not been granted the appropriate permissions to create it.
27191 16 No The '%d' permission is not applicable to objects of type '%d'. Grant, deny, or revoke of this permission is not allowed.
27192 16 No The caller has not been granted the MANAGEPERMISSION permission for the specified object.
27193 16 No SQL Server %ls is required to install Integration Services. It cannot be installed on this version of SQL Server.
27194 16 No Cannot find the project because it does not exist or you do not have sufficient permissions.
27195 16 No The operation failed because the execution timed out.
27196 16 No Failed to delete the folder '%ls' because it is not empty. Only empty folders can be deleted.
27197 16 No The specified %ls %ld does not exist.
27198 16 No Failed to locate records for the specified operation (ID %I64d).
27199 16 No %ls is not a valid folder name. It consists of characters that are not allowed.
27200 16 No The project is missing the specified environment reference.
27201 16 No Values are missing for required parameters in this package. Specify values in order to start the validation.
27202 16 No This project is missing one or more environment references. In order to use environment variables, specify the corresponding environment reference identifier.
27203 16 No Failed to deploy project. For more information, query the operation_messages view for the operation identifier '%I64d'.
27204 16 No Failed to create environment reference. This project already has an reference to the specified environment.
27205 16 No Some of the property values for this parameter are missing.
27206 16 No Failed to deploy project to the folder '%ls'. You do not have sufficient permissions to deploy this project.
27207 16 No Failed to locate one or more variables in the environment '%ls'.
27208 16 No The environment reference '%I64d' is not associated with the project.
27209 16 No Failed to create environment to the folder '%ls'. You do not have sufficient permissions to create this environment.
27210 16 No Conversion failed when converting the %ls to data type %ls.
27212 16 No Data tap can only be added or removed when the execution status is created.
27213 16 No The package path and data flow path ID strings already exist for the execution ID %I64d. Provide package path and data flow path ID strings that are not in the catalog.execution_data_taps view.
27214 16 No The data flow task GUID '%ls' and the data flow path ID string already exist for the execution ID %I64d. Provide a data flow task GUID and a data flow path ID string that are not in the catalog.execution_data_taps view.
27215 16 No The data tap '%I64d' does not exist, or you do not have sufficient permissions to remove it. Provide a valid data tap ID.
27216 16 No The number of rows must be a non-negative value. Specify a valid value.
27217 16 No The logging level '%d' is undefined. Provide one of the following logging levels: 0 (None), 1 (Basic), 2 (Performance), 3 (Verbose), 4 (RuntimeLineage), 100 (Customized).
27218 16 No The Integration Services Server cannot find the running process for execution ID %I64d. Provide a valid execution ID.
27219 16 No Caller does not have permissions to execute the stored procedure.
27220 16 No SSISDB database does not exist. Create the SSISDB database.
27221 16 No Unable to map an environment variable with the sensitive property set to True, to a parameter with the sensitive property set to False. Ensure that the property settings match.
27222 16 No The required components for the 64-bit edition of Integration Services cannot be found. Run SQL Server Setup to install the required components.
27223 16 No Cannot move the project to folder '%ls' due to insufficient permissions.
27224 16 No The parameter value cannot be changed after the execution has been started.
27225 16 No The property cannot be overridden after the execution has been started.
27226 16 No The database principal has granted or denied permissions to catalog objects in the database and cannot be dropped.
27227 16 No The server '%ls' already exists.
27228 16 No The server '%ls' does not exists.
27229 16 No Cannot find the SQL login '%ls'.
27230 16 No Failed to deploy the packages. Try again later.
27231 16 No Failed to deploy packages. For more information, query the operation_messages view for the operation identifier '%I64d'.
27232 16 No Failed to create customized logging level '%ls'. You do not have sufficient permissions to create customized logging level.
27233 16 No Customized logging level name cannot be NULL or an empty string.
27234 16 No '%ls' is not a valid customized logging level name. It consists of characters that are not allowed.
27235 16 No The customized logging level '%ls' already exists.
27236 16 No Failed to delete customized logging level '%ls'. You do not have sufficient permissions to delete customized logging level.
27237 16 No The customized logging level '%ls' does not exist.
27238 16 No Failed to rename customized logging level '%ls' with '%ls'. You do not have sufficient permissions to rename customized logging level.
27239 16 No Failed to update customized logging level '%ls'. You do not have sufficient permissions to update customized logging level.
27240 16 No The value can not be less than zero.
27241 16 No Failed to update logging level '%d'. Provide the value for SERVER_CUSTOMIZED_LOGGING_LEVEL property, as it can not be null or empty for logging level '%d'.
27242 16 No Cannot find the cluster execution job instance '%ls' because it does not exist or you do not have sufficient permissions.
27243 16 No Cannot find the cluster worker agent '%ls' because it does not exist or you do not have sufficient permissions.
27246 16 No Cannot find the cluster execution task instance '%ls' because it does not exist or you do not have sufficient permissions.
27251 16 No Cannot add a worker agent to execute the cluster job instance '%ls' because the job is specified for all worker agents.
27252 16 No The Integration Services cluster worker agent '%ls' is disabled.
27255 16 No The job id of the execution is null. Create a job for the execution first and try again.
27256 16 No The event message does not exist.
27257 16 No There is no active worker agent.
27259 16 No Failed to enable worker agent because current SQL Server edition only support limited number of worker agents.
27260 16 No Only members of sysadmin server roles can perform this action.
27261 16 No There is no Scale Out Master installed.
27303 16 Yes An unexpected error with HRESULT 0x%x occurred while processing backup files. Refer to the SQL Server error log for information about any related errors that were encountered. Address those errors if necessary, and retry the operation.
27308 16 Yes SegmentID %d from the archive does not match the segmentID %d from the specified filename on brick %d.
27400 10 No An invalid synctoken was used for a reference fetch during attribute synchronization with an external governance engine.
27401 10 No A database was found with the wrong state during an external governance operation.
27402 10 No A database was not found during an external governance operation.
27403 10 No A schema was not found during an external governance operation.
27404 10 No A relation was not found during an external governance operation.
27405 10 No A column was not found during an external governance operation.
27406 10 No The database registration was not found during an external governance operation.
27407 10 No The database registration attributes could not be obtained during an external governance operation.
27408 10 No An external governance operation was attempted on a database that differs from the current one.
27409 16 No The sensitivity classification DDL commands are disabled when a database is under external governance.
27410 16 No The references to the attribute synchronization data blobs must be in JSON format.
27411 16 No The references to the attribute synchronization data blobs must be in a JSON array.
27412 16 No A reference to the attribute synchronization data blobs must be a JSON object.
27413 16 No A reference to the attribute synchronization data blobs does not have the proper JSON format.
27414 16 No Malformed resource path.
27415 16 No Invalid JSON for attribute synchronization data.
27416 16 No Cannot create attribute because it is missing information.
27417 16 No Invalid JSON format for classification attribute.
27418 16 No Unsupported attribute synchronization event.
27419 16 No Unsupported kind of synchronization attribute .
27420 16 No Cannot update synchronization attribute because version is older.
27421 16 No Cannot create HTTP client for attribute synchronization.
27422 16 No Invalid JSON format for reference fetch response.
27423 16 No Could not execute a reference fetch because the AAD token could not be created.
27424 10 No An object was not found during an external governance operation.
27425 10 No No more attribute events for the specified token.
27426 16 Yes External governance synchronization task failed to acquire lock while trying to synchronize attributes.
27427 16 Yes External governance synchronization task failed to initialize attribute synchronization manager.
27428 16 Yes '%ls' is not a valid option for the @scope parameter. Enter 'access_policies', 'attributes' or 'full'.
27429 21 No Fatal error: Unable to synchronize attributes to database '%ls' for %d consecutive attempts.
27500 16 No An HTTP error occurred.
27501 16 No An unsupported connection type HTTP error occurred.
27502 16 No An open session HTTP error occurred.
27503 16 No A connect session HTTP error occurred.
27504 16 No An attempt connect HTTP error occurred.
27505 16 No An open request HTTP error occurred.
27506 16 No An add request header HTTP error occurred.
27507 16 No A send request HTTP error occurred.
27508 16 No A get response code HTTP error occurred.
27509 16 No A response code unauthrozied HTTP error occurred.
27510 16 No A response code throttled HTTP error occurred.
27511 16 No A response code client error HTTP error occurred.
27512 16 No A response code server error HTTP error occurred.
27513 16 No A not found HTTP error occurred.
27514 16 No A forbidden HTTP error occurred.
27515 16 No A query header HTTP error occurred.
27516 16 No A query header out of memory (copy header) HTTP error occurred.
27517 16 No A query header out of memory (realloc buffer) HTTP error occurred.
27518 16 No A query header not found HTTP error occurred.
27519 16 No A query header update buffer length HTTP error occurred.
27520 16 No A read data HTTP error occurred.
27521 16 No A get response out of memory (create temp buffer) HTTP error occurred.
27522 16 No A get response out of memory (get result string) HTTP error occurred.
27523 16 No A get response out of memory (append response) HTTP error occurred.
27524 16 No A set client certificate context HTTP error occurred.
27525 16 No A get security flags HTTP error occurred.
27526 16 No A set security flags HTTP error occurred.
27527 16 No A receive response HTTP error occurred.
27528 16 No A 'NotModified' response HTTP error occurred.
27801 10 Yes Successfully initialize HPC environment from provider '%ld', device type '%ld' DLL version %ld, and find %ld device(s), %ld of them are used.
27802 16 Yes Failed to initialize HPC environment.
27803 10 Yes Message reported from (%.*s) device on device Id (%I64d), code : %d, message : %.*s .
27804 16 Yes Query failed on HPC device Id (%I64d), with error code %d .