Upravit

Sdílet prostřednictvím


CREATE SPATIAL INDEX (Transact-SQL)

Applies to: SQL Server Azure SQL Database Azure SQL Managed Instance

Creates a spatial index on a specified table and column in SQL Server. An index can be created before there is data in the table. Indexes can be created on tables or views in another database by specifying a qualified database name. Spatial indexes require the table to have a clustered primary key. Spatial indexes cannot be specified on indexed views. For information about spatial indexes, see Spatial Indexes Overview.

Transact-SQL syntax conventions

Syntax

CREATE SPATIAL INDEX index_name
  ON <object> ( spatial_column_name )  
    {  
       <geometry_tessellation> | <geography_tessellation>  
    }
  [ ON { filegroup_name | "default" } ]  
[;]
  
<object> ::=  
    { database_name.schema_name.table_name | schema_name.table_name | table_name }  
  
<geometry_tessellation> ::=  
{
  <geometry_automatic_grid_tessellation>
| <geometry_manual_grid_tessellation>
}  
  
<geometry_automatic_grid_tessellation> ::=  
{  
    [ USING GEOMETRY_AUTO_GRID ]  
          WITH  (  
        <bounding_box>  
            [ [,] <tessellation_cells_per_object> [ ,...n] ]  
            [ [,] <spatial_index_option> [ ,...n] ]  
                 )  
}  
  
<geometry_manual_grid_tessellation> ::=  
{  
       [ USING GEOMETRY_GRID ]  
         WITH (  
                    <bounding_box>  
                        [ [,]<tessellation_grid> [ ,...n] ]  
                        [ [,]<tessellation_cells_per_object> [ ,...n] ]  
                        [ [,]<spatial_index_option> [ ,...n] ]  
   )  
}
  
<geography_tessellation> ::=  
{  
      <geography_automatic_grid_tessellation> | <geography_manual_grid_tessellation>  
}  
  
<geography_automatic_grid_tessellation> ::=  
{  
    [ USING GEOGRAPHY_AUTO_GRID ]  
    [ WITH (  
        [ [,] <tessellation_cells_per_object> [ ,...n] ]  
        [ [,] <spatial_index_option> ]  
     ) ]  
}  
  
<geography_manual_grid_tessellation> ::=  
{  
    [ USING GEOGRAPHY_GRID ]  
    [ WITH (  
                [ <tessellation_grid> [ ,...n] ]  
                [ [,] <tessellation_cells_per_object> [ ,...n] ]  
                [ [,] <spatial_index_option> [ ,...n] ]  
                ) ]  
}  
  
<bounding_box> ::=  
{  
      BOUNDING_BOX = ( {  
       xmin, ymin, xmax, ymax
       | <named_bb_coordinate>, <named_bb_coordinate>, <named_bb_coordinate>, <named_bb_coordinate>
  } )  
}  
  
<named_bb_coordinate> ::= { XMIN = xmin | YMIN = ymin | XMAX = xmax | YMAX=ymax }  
  
<tessellation_grid> ::=  
{
    GRIDS = ( { <grid_level> [ ,...n ] | <grid_size>, <grid_size>, <grid_size>, <grid_size>  }
        )  
}  
<tessellation_cells_per_object> ::=  
{
   CELLS_PER_OBJECT = n
}  
  
<grid_level> ::=  
{  
     LEVEL_1 = <grid_size>
  |  LEVEL_2 = <grid_size>
  |  LEVEL_3 = <grid_size>
  |  LEVEL_4 = <grid_size>
}  
  
<grid_size> ::= { LOW | MEDIUM | HIGH }  
  
<spatial_index_option> ::=  
{  
    PAD_INDEX = { ON | OFF }  
  | FILLFACTOR = fillfactor  
  | SORT_IN_TEMPDB = { ON | OFF }  
  | IGNORE_DUP_KEY = OFF  
  | STATISTICS_NORECOMPUTE = { ON | OFF }  
  | DROP_EXISTING = { ON | OFF }  
  | ONLINE = OFF  
  | ALLOW_ROW_LOCKS = { ON | OFF }  
  | ALLOW_PAGE_LOCKS = { ON | OFF }  
  | MAXDOP = max_degree_of_parallelism  
    | DATA_COMPRESSION = { NONE | ROW | PAGE }  
}  

Arguments

index_name
Is the name of the index. Index names must be unique within a table but do not have to be unique within a database. Index names must follow the rules of identifiers.

ON <object> ( spatial_column_name )
Specifies the object (database, schema, or table) on which the index is to be created and the name of spatial column.

spatial_column_name specifies the spatial column on which the index is based. Only one spatial column can be specified in a single spatial index definition; however, multiple spatial indexes can be created on a geometry or geography column.

USING
Indicates the tessellation scheme for the spatial index. This parameter uses the type-specific value, shown in the following table:

Data type of column Tessellation scheme
geometry GEOMETRY_GRID
geometry GEOMETRY_AUTO_GRID
geography GEOGRAPHY_GRID
geography GEOGRAPHY_AUTO_GRID

A spatial index can be created only on a column of type geometry or geography, otherwise an error is raised. If an invalid parameter for a given type is passed, an error is raised.

For information about how SQL Server implements tessellation, see Spatial Indexes Overview.

ON filegroup_name
Applies to: SQL Server (SQL Server 2008 (10.0.x) and later) and Azure SQL Database

Creates the specified index on the specified filegroup. If no location is specified and the table is not partitioned, the index uses the same filegroup as the underlying table. The filegroup must already exist.

ON "default"
Applies to: SQL Server (SQL Server 2008 (10.0.x) and later) and Azure SQL Database

Creates the specified index on the default filegroup.

The term default, in this context, is not a keyword. It is an identifier for the default filegroup and must be delimited, as in ON "default" or ON [default]. If "default" is specified, the QUOTED_IDENTIFIER option must be ON for the current session. This is the default setting. For more information, see SET QUOTED_IDENTIFIER (Transact-SQL).

<object>::=
Is the fully qualified or non-fully qualified object to be indexed.

database_name
Is the name of the database.

schema_name
Is the name of the schema to which the table belongs.

table_name
Is the name of the table to be indexed.

Azure SQL Database supports the three-part name format database_name.[schema_name].object_name when the database_name is the current database or the database_name is tempdb and the object_name starts with #.

USING options

GEOMETRY_GRID
Specifies the geometry grid tessellation scheme that you are using. GEOMETRY_GRID can be specified only on a column of the geometry data type. GEOMETRY_GRID allows for manual adjusting of the tessellation scheme.

GEOMETRY_AUTO_GRID
Applies to: SQL Server (SQL Server 2012 (11.x) and later) and Azure SQL Database

Can be specified only on a column of the geometry data type. This is the default for this data type and does not need to be specified.

GEOGRAPHY_GRID
Specifies the geography grid tessellation scheme. GEOGRAPHY_GRID can be specified only on a column of the geography data type.

GEOGRAPHY_AUTO_GRID
Applies to: SQL Server (SQL Server 2012 (11.x) and later) and Azure SQL Database

Can be specified only on a column of the geography data type. This is the default for this data type and does not need to be specified.

WITH options

BOUNDING_BOX
Specifies a numeric four-tuple that defines the four coordinates of the bounding box: the x-min and y-min coordinates of the lower-left corner, and the x-max and y-max coordinates of the upper-right corner.

xmin
Specifies the x-coordinate of the lower-left corner of the bounding box.

ymin
Specifies the y-coordinate of the lower-left corner of the bounding box.

xmax
Specifies the x-coordinate of the upper-right corner of the bounding box.

ymax
Specifies the y-coordinate of the upper-right corner of the bounding box.

XMIN = xmin
Specifies the property name and value for the x-coordinate of the lower-left corner of the bounding box.

YMIN =ymin
Specifies the property name and value for the y-coordinate of the lower-left corner of the bounding box.

XMAX =xmax
Specifies the property name and value for the x-coordinate of the upper-right corner of the bounding box.

YMAX =ymax
Specifies the property name and value for the y-coordinate of upper-right corner of the bounding box

Note

Bounding-box coordinates apply only within a USING GEOMETRY_GRID clause.

xmax must be greater than xmin and ymax must be greater than ymin. You can specify any valid float value representation, assuming that: xmax > xmin and ymax > ymin. Otherwise the appropriate errors are raised.

There are no default values.

The bounding-box property names are case-insensitive regardless of the database collation.

To specify property names, you must specify each of them once and only once. You can specify them in any order. For example, the following clauses are equivalent:

  • BOUNDING_BOX =( XMIN =xmin, YMIN =ymin, XMAX =xmax, YMAX =ymax )

  • BOUNDING_BOX =( XMIN =xmin, XMAX =xmax, YMIN =ymin, YMAX =ymax)

GRIDS
Defines the density of the grid at each level of a tessellation scheme. When GEOMETRY_AUTO_GRID and GEOGRAPHY_AUTO_GRID are selected, this option is disabled.

For information about tessellation, see Spatial Indexes Overview.

The GRIDS parameters are as follows:

LEVEL_1
Specifies the first-level (top) grid.

LEVEL_2
Specifies the second-level grid.

LEVEL_3
Specifies the third-level grid.

LEVEL_4
Specifies the fourth-level grid.

LOW
Specifies the lowest possible density for the grid at a given level. LOW equates to 16 cells (a 4x4 grid).

MEDIUM
Specifies the medium density for the grid at a given level. MEDIUM equates to 64 cells (an 8x8 grid).

HIGH
Specifies the highest possible density for the grid at a given level. HIGH equates to 256 cells (a 16x16 grid).

Note

Using level names allows you to specify the levels in any order and to omit levels. If you use the name for any level, you must use the name of any other level that you specify. If you omit a level, its density defaults to MEDIUM.

Warning

If an invalid density is specified, an error is raised.

CELLS_PER_OBJECT =n
Specifies the number of tessellation cells per object that can be used for a single spatial object in the index by the tessellation process. n can be any integer between 1 and 8192, inclusive. If an invalid number is passed or the number is larger than the maximum number of cells for the specified tessellation, an error is raised.

CELLS_PER_OBJECT has the following default values:

USING option Default Cells per Object
GEOMETRY_GRID 16
GEOMETRY_AUTO_GRID 8
GEOGRAPHY_GRID 16
GEOGRAPHY_AUTO_GRID 12

At the top level, if an object covers more cells than specified by n, the indexing uses as many cells as necessary to provide a complete top-level tessellation. In such cases, an object might receive more than the specified number of cells. In this case, the maximum number is the number of cells generated by the top-level grid, which depends on the density.

The CELLS_PER_OBJECT value is used by the cells-per-object tessellation rule. For information about the tessellation rules, see Spatial Indexes Overview.

PAD_INDEX = { ON | OFF }
Applies to: SQL Server (SQL Server 2008 (10.0.x) and later) and Azure SQL Database

Specifies index padding. The default is OFF.

ON
Indicates that the percentage of free space that is specified by fillfactor is applied to the intermediate-level pages of the index.

OFF or fillfactor is not specified
Indicates that the intermediate-level pages are filled to near capacity, leaving sufficient space for at least one row of the maximum size the index can have, considering the set of keys on the intermediate pages.

The PAD_INDEX option is useful only when FILLFACTOR is specified, because PAD_INDEX uses the percentage specified by FILLFACTOR. If the percentage specified for FILLFACTOR is not large enough to allow for one row, the Database Engine internally overrides the percentage to allow for the minimum. The number of rows on an intermediate index page is never less than two, regardless of how low the value of fillfactor.

FILLFACTOR =fillfactor
Applies to: SQL Server (SQL Server 2008 (10.0.x) and later) and Azure SQL Database

Specifies a percentage that indicates how full the Database Engine should make the leaf level of each index page during index creation or rebuild. fillfactor must be an integer value from 1 to 100. The default is 0. If fillfactor is 100 or 0, the Database Engine creates indexes with leaf pages filled to capacity.

Note

Fill factor values 0 and 100 are the same in all respects.

The FILLFACTOR setting applies only when the index is created or rebuilt. The Database Engine does not dynamically keep the specified percentage of empty space in the pages. To view the fill factor setting, use the sys.indexes catalog view.

Important

Creating a clustered index with a FILLFACTOR less than 100 affects the amount of storage space the data occupies because the Database Engine redistributes the data when it creates the clustered index.

For more information, see Specify Fill Factor for an Index.

SORT_IN_TEMPDB = { ON | OFF }
Applies to: SQL Server (SQL Server 2008 (10.0.x) and later) and Azure SQL Database

Specifies whether to store temporary sort results in tempdb. The default is OFF.

ON
The intermediate sort results that are used to build the index are stored in tempdb. This may reduce the time required to create an index if tempdb is on a different set of disks than the user database. However, this increases the amount of disk space that is used during the index build.

OFF
The intermediate sort results are stored in the same database as the index.

In addition to the space required in the user database to create the index, tempdb must have about the same amount of additional space to hold the intermediate sort results. For more information, see SORT_IN_TEMPDB Option For Indexes.

IGNORE_DUP_KEY =OFF
Has no effect for spatial indexes because the index type is never unique. Do not set this option to ON, or else an error is raised.

STATISTICS_NORECOMPUTE = { ON | OFF}
Specifies whether distribution statistics are recomputed. The default is OFF.

ON
Out-of-date statistics are not automatically recomputed.

OFF
Automatic statistics updating are enabled.

To restore automatic statistics updating, set the STATISTICS_NORECOMPUTE to OFF, or execute UPDATE STATISTICS without the NORECOMPUTE clause.

Important

Disabling automatic recomputation of distribution statistics may prevent the query optimizer from picking optimal execution plans for queries involving the table.

DROP_EXISTING = { ON | OFF }
Applies to: SQL Server (SQL Server 2008 (10.0.x) and later) and Azure SQL Database

Specifies that the named, preexisting spatial index is dropped and rebuilt. The default is OFF.

ON
The existing index is dropped and rebuilt. The index name specified must be the same as a currently existing index; however, the index definition can be modified. For example, you can specify different columns, sort order, partition scheme, or index options.

OFF
An error is displayed if the specified index name already exists.

The index type cannot be changed by using DROP_EXISTING.

ONLINE =OFF
Specifies that underlying tables and associated indexes are not available for queries and data modification during the index operation. In this version of SQL Server, online index builds are not supported for spatial indexes. If this option is set to ON for a spatial index, an error is raised. Either omit the ONLINE option or set ONLINE to OFF.

An offline index operation that creates, rebuilds, or drops a spatial index, acquires a Schema modification (Sch-M) lock on the table. This prevents all user access to the underlying table for the duration of the operation.

Note

Online index operations are not available in every edition of SQL Server. For a list of features that are supported by the editions of SQL Server, see Features Supported by the Editions of SQL Server 2016.

ALLOW_ROW_LOCKS = { ON | OFF }
Applies to: SQL Server (SQL Server 2008 (10.0.x) and later) and Azure SQL Database

Specifies whether row locks are allowed. The default is ON.

ON
Row locks are allowed when accessing the index. The Database Engine determines when row locks are used.

OFF
Row locks are not used.

ALLOW_PAGE_LOCKS = { ON | OFF }
Applies to: SQL Server (SQL Server 2008 (10.0.x) and later) and Azure SQL Database

Specifies whether page locks are allowed. The default is ON.

ON
Page locks are allowed when accessing the index. The Database Engine determines when page locks are used.

OFF
Page locks are not used.

MAXDOP =max_degree_of_parallelism
Applies to: SQL Server (SQL Server 2008 (10.0.x) and later) and Azure SQL Database

Overrides the max degree of parallelism configuration option for the duration of the index operation. Use MAXDOP to limit the number of processors used in a parallel plan execution. The maximum is 64 processors.

Important

Although the MAXDOP option is syntactically supported, CREATE SPATIAL INDEX currently always uses only a single processor.

max_degree_of_parallelism can be:

1
Suppresses parallel plan generation.

>1
Restricts the maximum number of processors used in a parallel index operation to the specified number or fewer based on the current system workload.

0 (default)
Uses the actual number of processors or fewer based on the current system workload.

For more information, see Configure Parallel Index Operations.

Note

Parallel index operations are not available in every edition of Microsoft SQL Server. For a list of features that are supported by the editions of SQL Server, see Features Supported by the Editions of SQL Server 2016.

DATA_COMPRESSION = {NONE | ROW | PAGE}
Applies to: SQL Server (SQL Server 2012 (11.x) and later) and Azure SQL Database

Determines the level of data compression used by the index.

NONE
No compression used on data by the index

ROW
Row compression used on data by the index

PAGE
Page compression used on data by the index

Remarks

Every option can be specified only once per CREATE SPATIAL INDEX statement. Specifying a duplicate of any option raises an error.

You can create up to 249 spatial indexes on each spatial column in a table. Creating more than one spatial index on specific spatial column can be useful, for example, to index different tessellation parameters in a single column.

Important

There are a number of other restrictions on creating a spatial index. For more information, see Spatial Indexes Overview.

An index build cannot make use of available process parallelism.

Methods supported on spatial indexes

Under certain conditions, spatial indexes support a number of set-oriented geometry methods. For more information, see Spatial Indexes Overview.

Spatial indexes and partitioning

By default, if a spatial index is created on a partitioned table, the index is partitioned according to the partition scheme of the table. This assures that index data and the related row are stored in the same partition.

In this case, to alter the partition scheme of the base table, you would have to drop the spatial index before you can repartition the base table. To avoid this restriction, when you are creating a spatial index, you can specify the "ON filegroup" option. For more information, see "Spatial Indexes and Filegroups," later in this topic.

Spatial indexes and filegroups

By default, spatial indexes are partitioned to the same filegroups as the table on which the index is specified. This can be overridden by using the filegroup specification:

[ ON { filegroup_name | "default" } ]
If you specify a filegroup for a spatial index, the index is placed on that filegroup, regardless of the partitioning scheme of the table.

Catalog views for spatial indexes

The following catalog views are specific to spatial indexes:

sys.spatial_indexes
Represents the main index information of the spatial indexes.

sys.spatial_index_tessellations
Represents the information about the tessellation scheme and parameters of each of the spatial indexes.

Additional remarks about creating indexes

For more information about creating indexes, see the "Remarks" section in CREATE INDEX (Transact-SQL).

Permissions

The user must have ALTER permission on the table or view, or be a member of the sysadmin fixed server role or the db_ddladmin and db_owner fixed database roles.

Examples

A. Creating a spatial index on a geometry column

The following example creates a table named SpatialTable that contains a geometry type column, geometry_col. The example then creates a spatial index, SIndx_SpatialTable_geometry_col1, on the geometry_col. The example uses the default tessellation scheme and specifies the bounding box.

CREATE TABLE SpatialTable(id int primary key, geometry_col geometry);  
CREATE SPATIAL INDEX SIndx_SpatialTable_geometry_col1
   ON SpatialTable(geometry_col)  
   WITH ( BOUNDING_BOX = ( 0, 0, 500, 200 ) );  

B. Creating a spatial index on a geometry column

The following example creates a second spatial index, SIndx_SpatialTable_geometry_col2, on the geometry_col in the SpatialTable table. The example specifies GEOMETRY_GRID as the tessellation scheme. The example also specifies the bounding box, different densities on different grid levels, and 64 cells per object. The example also sets the index padding to ON.

CREATE SPATIAL INDEX SIndx_SpatialTable_geometry_col2  
   ON SpatialTable(geometry_col)  
   USING GEOMETRY_GRID  
   WITH (  
    BOUNDING_BOX = ( xmin=0, ymin=0, xmax=500, ymax=200 ),  
    GRIDS = (LOW, LOW, MEDIUM, HIGH),  
    CELLS_PER_OBJECT = 64,  
    PAD_INDEX  = ON );  

C. Creating a spatial index on a geometry column

The following example creates a third spatial index, SIndx_SpatialTable_geometry_col3, on the geometry_col in the SpatialTable table. The example uses the default tessellation scheme. The example specifies the bounding box and uses different cell densities on the third and fourth levels, while using the default number of cells per object.

CREATE SPATIAL INDEX SIndx_SpatialTable_geometry_col3  
   ON SpatialTable(geometry_col)  
   WITH (  
    BOUNDING_BOX = ( 0, 0, 500, 200 ),  
    GRIDS = ( LEVEL_4 = HIGH, LEVEL_3 = MEDIUM ) );  

D. Changing an option that is specific to spatial indexes

The following example rebuilds the spatial index created in the preceding example, SIndx_SpatialTable_geography_col3, by specifying a new LEVEL_3 density with DROP_EXISTING = ON.

CREATE SPATIAL INDEX SIndx_SpatialTable_geography_col3  
   ON SpatialTable(geography_col)  
   WITH ( BOUNDING_BOX = ( 0, 0, 500, 200 ),  
        GRIDS = ( LEVEL_3 = LOW ),  
        DROP_EXISTING = ON );  

E. Creating a spatial index on a geography column

The following example creates a table named SpatialTable2 that contains a geography type column, geography_col. The example then creates a spatial index, SIndx_SpatialTable_geography_col1, on the geography_col. The example uses the default parameters values of the GEOGRAPHY_AUTO_GRID tessellation scheme.

CREATE TABLE SpatialTable2(id int primary key, object GEOGRAPHY);  
CREATE SPATIAL INDEX SIndx_SpatialTable_geography_col1
   ON SpatialTable2(object);  

Note

For geography grid indexes, a bounding box cannot be specified.

F. Creating a spatial index on a geography column

The following example creates a second spatial index, SIndx_SpatialTable_geography_col2, on the geography_col in the SpatialTable2 table. The example specifies GEOGRAPHY_GRID as the tessellation scheme. The example also specifies different grid densities on different levels and 64 cells per object. The example also sets the index padding to ON.

CREATE SPATIAL INDEX SIndx_SpatialTable_geography_col2  
   ON SpatialTable2(object)  
   USING GEOGRAPHY_GRID  
   WITH (  
    GRIDS = (MEDIUM, LOW, MEDIUM, HIGH ),  
    CELLS_PER_OBJECT = 64,  
    PAD_INDEX  = ON );  

G. Creating a spatial index on a geography column

The example then creates a third spatial index, SIndx_SpatialTable_geography_col3, on the geography_col in the SpatialTable2 table. The example uses the default tessellation scheme, GEOGRAPHY_GRID, and the default CELLS_PER_OBJECT value (16).

CREATE SPATIAL INDEX SIndx_SpatialTable_geography_col3  
   ON SpatialTable2(object)  
   WITH ( GRIDS = ( LEVEL_3 = HIGH, LEVEL_2 = HIGH ) );  

See also

ALTER INDEX (Transact-SQL)
CREATE INDEX (Transact-SQL)
CREATE PARTITION FUNCTION (Transact-SQL)
CREATE PARTITION SCHEME (Transact-SQL)
CREATE STATISTICS (Transact-SQL)
CREATE TABLE (Transact-SQL)
Data Types (Transact-SQL)
DBCC SHOW_STATISTICS (Transact-SQL)
DROP INDEX (Transact-SQL)
EVENTDATA (Transact-SQL)
sys.index_columns (Transact-SQL)
sys.indexes (Transact-SQL)
sys.spatial_index_tessellations (Transact-SQL)
sys.spatial_indexes (Transact-SQL)
Spatial Indexes Overview