.kframes (Set Stack Length)
The .kframes command sets the default length of a stack trace display.
.kframes FrameCountDefault
Parameters
FrameCountDefault
Specifies the number of stack frames to display when a stack trace command is used.
Environment
| Environment | |
|---|---|
| Modes | User mode, kernel mode |
| Targets | Live, crash dump |
| Platforms | All |
Remarks
You can use the .kframes command to set the default length of a stack trace display. This length controls the number of frames that the k, kb, kp, kP, and kv commands display and the number of DWORD_PTRs that the kd command displays.
You can override this default length by using the FrameCount or WordCount parameters for these commands.
Use the .kframes command, without any parameters to see current value.
.kframes
Default stack trace depth is 0n256 frames
Use the following command to set the stack trace depth to 0x2.
.kframes 0x2
Default stack trace depth is 0n2 frames
Use the following commands to display two stack and two raw stack values.
k
# Child-SP RetAddr Call Site
00 00000054`b71ffb78 00007ffe`1ee672ae ntdll!DbgBreakPoint
01 00000054`b71ffb80 00007ffe`1e2a3e2d ntdll!DbgUiRemoteBreakin+0x4e
kd
00000054`b71ffb70 00000000
00000054`b71ffb74 00000000
Specify the FrameCount and WordCount to display additional values.
k 3
# Child-SP RetAddr Call Site
00 00000054`b71ffb78 00007ffe`1ee672ae ntdll!DbgBreakPoint
01 00000054`b71ffb80 00007ffe`1e2a3e2d ntdll!DbgUiRemoteBreakin+0x4e
02 00000054`b71ffbb0 00007ffe`1eddef48 KERNEL32!BaseThreadInitThunk+0x1d
kd 5
00000054`b71ffb70 00000000
00000054`b71ffb74 00000000
00000054`b71ffb78 1ee672ae
00000054`b71ffb7c 00007ffe
00000054`b71ffb80 00000000