Poznámka:
Přístup k této stránce vyžaduje autorizaci. Můžete se zkusit přihlásit nebo změnit adresáře.
Přístup k této stránce vyžaduje autorizaci. Můžete zkusit změnit adresáře.
Ovladače mohou rozdělit hardware zařízení na několik logických komponent, aby bylo možné jemně odstupňované řízení spotřeby. Komponenta má sadu stavů napájení, které lze spravovat nezávisle na stavu napájení jiných komponent ve stejném zařízení. Ve stavu F0 je komponenta plně zapnutá. Komponenta může podporovat další stavy s nízkým výkonem F1, F2 atd.
Vlastníkem zásad napájení pro zařízení je obvykle ovladač funkce zařízení. Pokud chcete povolit řízení spotřeby na úrovni komponent, tento ovladač zaregistruje zařízení v rámci řízení spotřeby (PoFx). Při registraci zařízení ovladač přebírá odpovědnost za informování PoFx, když se komponenta aktivně používá a kdy je komponenta nečinná. PoFx vytváří inteligentní volby stavu nečinnosti pro zařízení na základě informací o aktivitě komponent, tolerance latence, očekávané době nečinnosti a požadavcích na probuzení. Díky řízení využití energie na úrovni komponenty může PoFx snížit požadavky na napájení a současně zachovat odezvu systému. Další informace najdete v tématu Component-Level řízení spotřeby.
Rutiny řízení spotřeby zařízení
Tyto rutiny implementuje architektura řízení spotřeby (PoFx), která umožňuje řízení spotřeby zařízení. Tyto rutiny volají ovladač, který je vlastníkem zásad napájení (PPO) pro zařízení. Ovladač funkce pro zařízení je obvykle PPO pro toto zařízení.
| Topic | Description |
|---|---|
| PoFxActivateComponent | The PoFxActivateComponent routine increments the activation reference count on the specified component. |
| PoFxCompleteDevicePowerNotRequired | The PoFxCompleteDevicePowerNotRequired routine notifies the power management framework (PoFx) that the calling driver has completed its response to a call to the driver's DevicePowerNotRequiredCallback callback routine. |
| PoFxCompleteIdleCondition | The PoFxCompleteIdleCondition routine informs the power management framework (PoFx) that the specified component has completed a pending change to the idle condition. |
| PoFxCompleteIdleState | Rutina PoFxCompleteIdleState informuje architekturu řízení spotřeby (PoFx), že zadaná komponenta dokončila čekající změnu stavu Fx. |
| PoFxIdleComponent | The PoFxIdleComponent routine decrements the activation reference count on the specified component. |
| PoFxIssueComponentPerfStateChange | The PoFxIssueComponentPerfStateChange routine submits a request to place a device component in a particular performance state. |
| PoFxIssueComponentPerfStateChangeMultiple | The PoFxIssueComponentPerfStateChangeMultiple routine submits a request to change the performance states in multiple performance state sets simultaneously for a device component. |
| PoFxNotifySurprisePowerOn | The PoFxNotifySurprisePowerOn routine notifies the power management framework (PoFx) that a device was turned on as a side effect of supplying power to some other device. |
| PoFxPowerControl | The PoFxPowerControl routine sends a power control request to the power management framework (PoFx). |
| PoFxQueryCurrentComponentPerfState | The PoFxQueryCurrentComponentPerfState routine retrieves the active performance state in a component's performance state set. |
| PoFxRegisterComponentPerfStates | The PoFxRegisterComponentPerfStates routine registers a device component for performance state management by the power management framework (PoFx). |
| PoFxRegisterDevice | The PoFxRegisterDevice routine registers a device with the power management framework (PoFx). |
| PoFxReportDevicePoweredOn | The PoFxReportDevicePoweredOn routine notifies the power management framework (PoFx) that the device completed the requested transition to the D0 (fully on) power state. |
| PoFxSetComponentLatency | The PoFxSetComponentLatency routine specifies the maximum latency that can be tolerated in the transition from the idle condition to the active condition in the specified component. |
| PoFxSetComponentResidency | The PoFxSetComponentResidency routine sets the estimated time for how long a component is likely to remain idle after the component enters the idle condition. |
| PoFxSetComponentWake | The PoFxSetComponentWake routine indicates whether the driver arms the specified component to wake whenever the component enters the idle condition. |
| PoFxSetDeviceIdleTimeout | The PoFxSetDeviceIdleTimeout routine specifies the minimum time interval from when the last component of the device enters the idle condition to when the power management framework (PoFx) calls the driver's DevicePowerNotRequiredCallback callback routine. |
| PoFxStartDevicePowerManagement | The PoFxStartDevicePowerManagement routine completes the registration of a device with the power management framework (PoFx) and starts device power management. |
| PoFxUnregisterDevice | The PoFxUnregisterDevice routine removes the registration of a device from the power management framework (PoFx). |
Zpětná volání správy spotřeby zařízení
Tyto rutiny zpětného volání vyžadují architektura řízení spotřeby (PoFx) k povolení řízení spotřeby zařízení. Ovladač, který je vlastníkem zásad napájení pro zařízení, implementuje tyto rutiny zpětného volání. PoFx volá tyto rutiny k dotazování a konfiguraci stavů napájení komponent v zařízení.
| Topic | Description |
|---|---|
| ComponentActiveConditionCallback | The ComponentActiveConditionCallback callback routine notifies the driver that the specified component completed a transition from the idle condition to the active condition. |
| ComponentIdleConditionCallback | The ComponentIdleConditionCallback callback routine notifies the driver that the specified component completed a transition from the active condition to the idle condition. |
| ComponentIdleStateCallback | The ComponentIdleStateCallback callback routine notifies the driver of a pending change to the Fx power state of the specified component. |
| ComponentPerfStateCallback | The ComponentPerfStateCallback callback routine notifies the driver that its request to change the performance state of a component is complete. |
| DevicePowerNotRequiredCallback | The DevicePowerNotRequiredCallback callback routine notifies the device driver that the device is not required to stay in the D0 power state. |
| DevicePowerRequiredCallback | The DevicePowerRequiredCallback callback routine notifies the device driver that the device must enter and remain in the D0 power state. |
| PowerControlCallback | The PowerControlCallback callback routine performs a power control operation that is requested by the power management framework (PoFx). |
Struktury řízení spotřeby zařízení
Architektura řízení spotřeby (PoFx) definuje tyto struktury pro podporu řízení spotřeby zařízení.
| Topic | Description |
|---|---|
| PO_FX_COMPONENT_V1PO_FX_COMPONENT_V2 | The PO_FX_COMPONENT structure describes the power state attributes of a component in a device. |
| PO_FX_COMPONENT_IDLE_STATE | The PO_FX_COMPONENT_IDLE_STATE structure specifies the attributes of an Fx power state of a component in a device. |
| PO_FX_COMPONENT_PERF_INFO | The PO_FX_COMPONENT_PERF_INFO structure describes all the sets of performance states for a single component within a device. |
| PO_FX_COMPONENT_PERF_SET | The PO_FX_COMPONENT_PERF_SET structure represents a set of performance states for a single component within a device. |
| PO_FX_DEVICE_V1PO_FX_DEVICE_V2PO_FX_DEVICE_V3 | The PO_FX_DEVICE structure describes the power attributes of a device to the power management framework (PoFx). |
| PO_FX_PERF_STATE | The PO_FX_PERF_STATE structure represents a performance state for a single component within a device. |
| PO_FX_PERF_STATE_CHANGE | The PO_FX_PERF_STATE_CHANGE structure contains information about a change to a performance state that is being requested by calling the PoFxIssueComponentPerfStateChange or PoFxIssueComponentPerfStateChangeMultiple routine. |
Výčet řízení spotřeby zařízení
Architektura řízení spotřeby (PoFx) definuje tyto výčty pro podporu řízení spotřeby zařízení.
| Topic | Description |
|---|---|
| PO_FX_PERF_STATE_TYPE | The PO_FX_PERF_STATE_TYPE enumeration contains values that describe the type of performance states in a PO_FX_COMPONENT_PERF_SET. |
| PO_FX_PERF_STATE_UNIT | The PO_FX_PERF_STATE_UNIT enumeration contains values that describe the type of unit that is controlled by the performance states in a PO_FX_COMPONENT_PERF_SET. |
Konstanty řízení spotřeby zařízení
PO_FX_FLAG_XXX bitů příznaku
The PO_FX_FLAG_XXX constants are flag bits that indicate whether a request to change the condition of component is performed synchronously or asynchronously.
#define PO_FX_FLAG_BLOCKING 0x1
#define PO_FX_FLAG_ASYNC_ONLY 0x2
PO_FX_FLAG_XXX constants
| Constant | Description |
|---|---|
| PO_FX_FLAG_BLOCKING | Proveďte synchronní změnu podmínky. Pokud je tento příznak nastavený, rutina, která požaduje změnu podmínky, nevrátí řízení volajícímu ovladači, dokud hardware komponenty nedokončí přechod na novou podmínku. Tento příznak lze použít pouze v případě, že volající běží na DISPATCH_LEVEL IRQL < . |
| PO_FX_FLAG_ASYNC_ONLY | Proveďte plně asynchronní změnu podmínky. Pokud je tento příznak nastaven, volá se rutina zpětného volání volajícího ovladače z jiného vlákna, než je vlákno, ve kterém je volána rutina, která požaduje změnu podmínky. Rutina, která požaduje změnu podmínky, proto vždy vrací asynchronně bez čekání na dokončení zpětného volání. |
PO_FX_FLAG_XXX remarks
The Flags parameter to the following routines can be set to a PO_FX_FLAG_XXX constant:
- PoFxActivateComponent
- PoFxIdleComponent
- PoFxIssueComponentPerfStateChange
- PoFxIssueComponentPerfStateChangeMultiple
The PO_FX_FLAG_BLOCKING and PO_FX_FLAG_ASYNC_ONLY flag bits are mutually exclusive. Volající může v parametru Flags nastavit jeden nebo druhý bit příznaku, ale ne oba bity příznaků.
PO_FX_FLAG_XXX Requirements
| Version | Header |
|---|---|
| Podporováno od Windows 8. | Wdm.h |
PO_FX_FLAG_PERF_XXX bitů příznaku
The PO_FX_FLAG_PERF_XXX constants are flag bits that define how the power management framework (PoFx) manages performance states for a device component.
#define PO_FX_FLAG_PERF_PEP_OPTIONAL 0x1
#define PO_FX_FLAG_PERF_QUERY_ON_F0 0x2
#define PO_FX_FLAG_PERF_QUERY_ON_ALL_IDLE_STATES 0x4
| Constant | Value | Description |
|---|---|---|
| PO_FX_FLAG_PERF_PEP_OPTIONAL | 1 (0x1) | Označuje, že ovladač může měnit stavy výkonu bez pomoci z modulu plug-in rozšíření platformy (PEP) nebo že ovladač registruje stavy výkonu pouze pro účely protokolování. If this flag is set, the PoFxRegisterComponentPerfStates call will still succeeded if the PEP does not support performance states for the component. |
| PO_FX_FLAG_PERF_QUERY_ON_F0 | 2 (0x2) | U některých zařízení může pepa potřebovat umístit stav výkonu pro komponentu do určitého stavu výkonu (označovaný jako nominální stav výkonu), když komponentu vyloží. Ovladače nastaví tento příznak, pokud komponenta obsahuje jmenovité stavy výkonu, v takovém případě PoFx dotazuje PEP, aby určil aktuální stav výkonu při přechodu komponenty na F0. |
| PO_FX_FLAG_PERF_QUERY_ON_ALL_IDLE_STATES | 4 (0x4) | U některých zařízení může pep při přechodu komponenty mezi nečinné stavy potřebovat nastavit stav výkonu pro komponentu do určitého stavu výkonu (označovaný jako nominální stav výkonu). Ovladače nastaví tento příznak, pokud tato komponenta obsahuje jmenovité stavy výkonu, v takovém případě PoFx dotazuje PEP, aby určil aktuální stav výkonu, když komponenta přechází mezi stavy nečinnosti. |
PO_FX_FLAG_PERF_XXX remarks
The Flags parameter to the PoFxRegisterComponentPerfStates routine can be set to a PO_FX_FLAG_PERF_XXX constant.
PO_FX_FLAG_PERF_XXX requirements
| Requirements | Version |
|---|---|
| Podporováno od Windows 10. | Wdm.h |