Sdílet prostřednictvím


WPR Command-Line Options

Windows Performance Recorder (WPR) offers a simple command line interface. The full complexity of WPR is embedded in the recording profiles.

General options

WPR requires Windows 8.1 or later version operating system.

Syntax

wpr FirstLevelOption [<arguments>] [Additional options [<arguments>]]

You can get additional help with:

wpr -help [start | stop | status | profiles | providers | tracing | boottrace | heap | hardwarecounter | advanced]

The following FirstLevelOptions are available:

Option Description
-help Provide the list of sub-level help information .
-profiles Enumerates the profile names and descriptions from a profile.
-purgecache Purges the dynamic symbols cache.
-start Starts one or more profiles.
-marker Fires an event marker.
-markerflush (Obsolete) Fires an event marker and flushes the working set.
-status Displays the status of an active recording (if any).
-profiledetails Fires an event marker and flushes the working set.
-exportprofile export built-in profile to a file.
-providers Displays detailed information about providers.
-cancel Cancels the recording initiated by WPR (if any).
-stop Cancels and saves the recording initiated by WPR (if any).
-merge Merges etl files into the given file.
-flush Flushes the logging sessions initiated by WPR (if any).
-log Configures the debug information saved to the event log.
-disablepagingexecutive Changes the Disable Paging Executive settings.
-heaptracingconfig Changes a processes' heap tracing settings.
-snapshotconfig Change snapshot settings for a process.
-capturestateondemand Captures the states of the configured providers in the current recording.
-pmcsources Queries the list of PMU events available on the system.
-pmcsessions Query the list of sessions using PMU events.
-setprofint Sets the sampled profile interval.
-profint Queries the current profile interval.
-resetprofint Restores the default profile interval values.
-boottrace Configures the registry entries for autologger/globallogger sessions.
-enableperiodicsnapshot Enables Periodic Snapshot for the specified interval and given process id.
-disableperiodicsnapshot Disables Periodic Snapshot for all process.
-singlesnapshot Gets an on-demand Snapshot for the specified process.

Profiles

The Profiles option lists the WPR profiles that the recording uses.

Syntax

wpr -profiles [<path>]

The following table describes the available arguments that you can apply to this option. To see built-in profiles, omit the argument.

Argument Description
<path> Specifies the path and the name of the file that contains the profile definitions. For example:

wpr -profiles “c:\Users\User1\Documents\WPR Files\Custom Profiles\CustomProfile1.wprp”

Start

The Start option starts a recording by using one or more profiles.

Syntax

wpr -start <profile> [-start <profilen>]... [-filemode] [-recordtempto <temp folder path>] [-onoffscenario <OnOff Transition Type>] [-onoffresultspath <path to which the trace files are saved>] [-onoffproblemdescription <description of the scenario>] [-numiterations <number of iterations for OnOff tracing>]

The following table describes the available switches that you can apply to this option.

Switch Description
<profile> [-start <profilen>]... Specifies either a built-in profile or the path to a user-defined profile. You can specify up to 64 profiles on a single command line, with each profile specified as follows:

<profile> := [<filename.wprp>!]<profile name>[.{light|verbose}]

Each profile can define either light or verbose versions, or both versions. If neither option is specified, the verbose version is used unless the profile includes only a light version.
-shutdown [<KSR>] Specifies that session info and recordings will persist over the reboot. Shutdown option works only with the file mode trace where as KSR only works only with the memory mode. Call -stop command at the next boot to merge the trace.
-filemode Specifies that recording is done in file mode. (The default mode is memory.) By using this option, the data is recorded to an unbounded file, which can grow in size until it fills the disk.
-recordtempto <temp folder path> Specifies the temporary folder path that the recording is saved to.
-onoffscenario <OnOff Transition Type> Specifies one of the on/off transition types. These are: Boot, FastStartup, Shutdown, RebootCycle, Standby, or Hibernate.
-onoffresultspath <path to which the trace files are saved> Specifies the path to which the trace files are saved.
-onoffproblemdescription <description of the scenario> Specifies the description of the scenario.
-numiterations <number of iterations for OnOff tracing> Sets the number of iterations for OnOff recording. By default, the settings from the built-in or custom profile file are used by default.

Example

wpr -start CPU (Starts verbose CPU profile in memory mode)
wpr -start CPU.light -filemode (Starts light CPU profile in file mode)
wpr -start filename.wprp!ProfileName.Verbose (Starts verbose ProfileName profile defined in filename.wprp)

Stop

The Stop option stops the current recording and saves it to the file that is specified by the argument.

Syntax

wpr -stop <file> <problem description> -[skipPdbGen] [-force] [-compress]

The following table describes the available arguments that you can apply to this option.

Argument Description
<file name> Specifies the event trace log (ETL) file to which WPR saves the recording. This argument is required.
<problem description> Specifies the problem description. Although this argument is optional, we recommended that you use it.
-skipPdbGen Disables dynamic generation of ngen and embedded pdbs for .NET modules. This option can reduce the stop operation time.
-force Disables the warning when the target file extension is not .etl.
-compress Compresses output trace file.

Merge

The Merge option merges etl files into the given file.

Syntax

wpr -merge <trace files ...> <merged file> -[skipPdbGen] [-compress] [-supresspii] [-mergeonly] [-injectonly]

The following table describes the available arguments that you can apply to this option.

Argument Description
<trace files ...> Specifies one or more un-merged event trace log (ETL) files. This argument is required.
<merged file> Specifies the output file into which WPR merges ETL file(s).
-skipPdbGen Disables dynamic generation of ngen and embedded pdbs for .NET modules. This option can reduce the stop operation time.
-compress Compresses output trace file.
-supresspii Suppresses personally identifiable(PII) information.
-mergeonly Merges the traces without adding machine-specific information or image ID events. Cannot be used with -injectonly.
-injectonly Generates only machine-specific and/or image id events without copying original events in the merged file.

Cancel

The Cancel option cancels the current recording without saving the recorded data. If no instance is currently active, the Cancel option returns an error.

Syntax

wpr -cancel

This option takes no arguments.

Status

The Status option displays status information about the current WPR recording.

Syntax

wpr -status [profiles] [collectors [-details]]

If no recording is currently active, a message displays that WPR is not recording. If a recording is currently active and no arguments are used, the following status information displays:

WPR recording is in progress...

Time since start        : 00:04:27

Dropped event           : 0

Logging mode            : Memory

If you supply arguments together with the –status option, the information listed above displays together with data that is specific to that option. The following table describes the available arguments that you can apply to this option.

Argument Description and Example Output
profiles This argument lists each profile that is being used in the current WPR recording.

Example:

Recording system activity using the following set of profiles:

Profile : CPU.Verbose.Memory

collectors Lists collector information. If buffers have been lost, those buffers are listed.

Example:

Actively recording collectors:

Collector Name : NT Kernel Logger Buffer Size (KB) : 1024 Events Lost : 0 System Keywords CSwitch ProcessThread SampledProfile System Stacks CSwitch SampledProfile

Collector Name : WPR_initiated_WPR Event Collector Buffer Size (KB) : 1024 Events Lost : 0 Providers Microsoft-Windows-Shell-Core: 0x1000000000000: 0x04 Microsoft-Windows-Win32k: 0x1000000402000: 0xff : Stack CaptureState Providers on Save Microsoft-Windows-Win32k: 0x80000: 0xff

details Lists additional information about each collector.

Profiledetails

The Profiledetails option displays detailed information about a profile or set of profiles. To specify multiple profiles, use the following syntax where <profilen> refers to the name of each profile.

Syntax

wpr -profiledetails <profile1>+<profile2>+...+<profilen> [-filemode] -onoffscenario <OnOff Transition Type>

The following table describes the available switches that you can apply to this option.

Switch Description
-filemode Specifies that recording was done in file mode. (The default mode is memory.)
-onoffscenario <OnOff Transition Type> Specifies one of the on/off transition types. These are: Boot, FastStartup, Shutdown, RebootCycle, Standby, or Hibernate.

ExportProfile

The ExportProfile option exports the built-in profile(s) to the given file. Use wpr -Profiles command to enumerate available built-in profiles. To specify multiple profiles, use the following syntax where <profilen> refers to the name of each profile. The naming convention of the profiles is exactly the same as used in wpr -start. A profile is specified as <profile name>[.{light|verbose}].

Syntax

wpr -exportprofile <profile1>+<profile2>+...+<profilen> <ExportedFileName.wprp> [-filemode]

This example exports the filemode verbose GeneralProfile profile into GeneralProfileVerboseFile.wprp file.

Example

wpr -exportprofile GeneralProfile d:\profiles\GeneralProfileVerboseFile.wprp -filemode

Providers

The Providers option displays detailed information about providers. Providers refer to the Event Tracing for Windows (ETW) components that expose events to Windows Performance Recorder (WPR). To display information about providers, use the following syntax, where -providers refers to all installed/known and registered providers.

Syntax

wpr -providers

This option takes no arguments.

Boottrace

The Boottrace option configures the registry entries for autologger/globallogger sessions for the given profile.

Syntax

wpr -boottrace {-addboot [<filename.wprp>!]<profile> [-addboot <profile> ...] [-filemode] [-recordtempto <temp folder path>] | -stopboot <recording filename> <Problem description> | -cancelboot}

The following table describes the available keywords that you can apply to this option.

Argument Description
-boottrace Specifies the following argument is to set up the autologger. In current WPR, this argument is optional.
-addboot Sets the autologger registry entries for the given profile. The wpr -addboot command takes the same options as the wpr -start command. Note that this options does not immediately start the trace. After reboot, the autologger will be started by the operating system.
-stopboot Removes the autologger configured by addboot, stops the boot recording and merges all the recording into the given file. Note that this option saves the trace only if the autologger session is running (i.e. after reboot). Otherwise, this option will remove only the autologger configuration.
-cancelboot Removes the autologger configured by addboot and cancels the boot recording initiated by WPR.

CaptureStateOnDemand

The CaptureStateOnDemand option captures states for the configured providers in the current recording. The event provider should be configured for capturestateondemand within the profile file while the session is running.

Syntax

wpr-capturestateondemand

Below is an example of EventProvider:

<EventProvider Id="EventProvider_Microsoft-Windows-Win32k" Name="Microsoft-Windows-Win32k" NonPagedMemory="true" CaptureStateOnly="true">
      <CaptureStateOnDemand Timeout="5">
         <Keyword Value="0x0"/>
      </CaptureStateOnDemand>
    </EventProvider>

Marker

The Marker option fires an event marker with the given text in the current system logging session.

Syntax

wpr -marker <text> [-flush]
Argument Description
-flush Flushes the working set. Equivalent to -MarkerFlush.

MarkerFlush (Obsolete)

The MarkerFlush option fires an event marker with the given text and flushes the working set. This command is obsolete in current WPR.

Syntax

wpr -markerflush <text>

Flush

The Flush option flushes logging sessions to files initiated through WPR.

Syntax

wpr -flush

This option takes no arguments.

HeapTracingConfig

The HeapTracingConfig option enables or disables heap tracing for a specific process or store application.

Syntax

wpr -HeapTracingConfig <process name> [<package full name> <package relative app ID>] [{enable|disable}]

Note

  • If the {enable|disable} parameter is omitted, the current heap tracing configuration for the process or app will be displayed. For example: wpr -HeapTracingConfig Heaptest.exe enable
  • This command doesn’t immediately start the trace, and should be executed before taking the heap trace. See Recording for Heap Analysis for more details.
  • Always disable HeapTracingConfig for the process after tracing is done since it can impact the performance of the process.

Disablepagingexecutive

The Disablepagingexecutive option specifies whether drivers and kernel-mode system code can be paged to disk. Setting this option to on prevents paging. This option sets the value of DisablePagingExecutive in the registry.

Syntax

wpr -disablepagingexecutive {on | off}

Note

To correctly capture event stacks on 64-bit systems that are running Windows 7, disablepagingexecutive should be set to On, and the system must be rebooted before you start performance recording. For 32-bit systems that are running Windows 7 and for all systems that are running Windows 8 or higher, you can operate performance recording without setting disablepagingexecutive to On.

Log

The Log option appends and configures debug logging to the event log.

Syntax

wpr -log {enabled | disabled | remove}

The following table describes the available keywords that you can apply to this option.

Keyword Description
enabled Enables debug logging to the event log
disabled Disables debug logging to the event log
remove Uninstalls the WPR debug logging provider manifest from the system

Purgecache

The Purgecache option purges the managed symbols cache.

Syntax

wpr -purgecache

This option takes no arguments.

Help

Use this option to display on-line help in the Command Prompt window.

Syntax

wpr -help [start | stop | status | profiles | providers | tracing | boottrace | heap | hardwarecounter | advanced]

The following table describes the available keywords that you can apply to this option.

Keyword Description
No keyword Displays a list of options and short descriptions. To get further help for specific options, use a keyword. For example: wpr -help start.
start Describes the –start command-line argument. For more information, see Start.
stop Describes the -stop, -merge, and -cancel command-line argument.
status Describes -status command-line arguments. For more information, see Status.
profiles Describes -profiles, -profiledetails, and -exportprofile command-line arguments.
providers Describes the -providers command-line argument. For more information, see Providers.
tracing Describes the –marker, -flush, and -capturestateondemand command-line argument.
boottrace Describes the -addboot, -stopboot, and -cancelboot command-line arguments.
heap Describes -heaptracingconfig, -snapshotconfig, -enableperiodicsnapshot, -disableperiodicsnapshot, and -singlesnapshot command-line arguments.
hardwarecounter Describes -pmcsources, -pmcsessions, -setprofint, -profint, and -resetprofint command-line arguments.
advanced Describes -purgecache, -log, -disablepagingexecutive, -instancename, and -container command-line arguments.

SnapshotConfig

The SnapshotConfig option enables or disables the ability to capture one-time or periodic snapshots of <snapshot option>\ for a specific process or processes. Currently you can take take snapshots of the heap.

Syntax

wpr -SnapshotConfig <snapshot option> {-name <process name> | -pid <pid 1> [pid 2] ...} [{enable|disable}]

If the {enable|disable} parameter is omitted, the current snapshot configuration for the process will be displayed (i.e. only the -name option).

This example uses the snapshotconfig command with image names:

wpr -snapshotconfig heap -name Win32Project1.exe           //query snapshot config
wpr -snapshotconfig heap -name Win32Project1.exe enable    //enable snapshot config
wpr -snapshotconfig heap -name Win32Project1.exe disable   //disable snapshot config

This example uses the snapshotconfig command with a PID:

wpr -snapshotconfig heap -pid 8048 enable                //enable snapshot config

Note

If the process and OS architecture does not match match (for example, a win32 app on a 64bit Operating system), use the image name option.

The following table describes the available switches that you can apply to this option.

Switch Description
<snapshot option> Specifies one of the snapshot option types. Currently only the Heap is available.
-name Specifies the name of process. This switch cannot be used with -Pid switch. If this switch is used to enable the snapshot, the config will apply to all new instances of the specified process name. Please be sure to disable it when the testing has finished.
-pid Specifies the process id. This switch cannot be used with -name switch. If this switch is used to enable the snapshot, the configuration will be applied immediately and for the lifetime of the process.

SingleSnapshot

The SingleSnapshot option triggers an on-demand snapshot of <snapshot option> for specified process ID.

Syntax

wpr -SnapshotConfig <snapshot option> <pid 1> [pid 2] ... [up to pid 8]

Note

The snapshot feature needs to be enabled for the process id (or name) before calling SingleSnapshot.

For example: wpr -singlesnapshot heap <pid for foo.exe>

Please refer to SnapshotConfig command for more information.

The following table describes the available switches that you can apply to this option.

Switch Description
<snapshot option> Specifies one of the snapshot option type.
<pid> Specifies the process id.

EnablePeriodicSnapshot

The EnablePeriodicSnapshot option triggers periodic snapshots at specified intervals and given process IDs

Syntax

wpr -enableperiodicsnapshot <snapshot option> <interval (in seconds)> <pid 1> [pid 2] ... [up to pid 8]

Note

The snapshot feature needs to be enabled for the process id (or name) before calling SingleSnapshot.

For example: wpr -enableperiodicsnapshot heap 60 <pid for foo.exe>

Please refer to SnapshotConfig command for more information.

The following table describes the available switches that you can apply to this option.

Switch Description
<snapshot option> Specifies one of the snapshot option type.
<interval> Specifies the interval in seconds. Note that the minimum valid interval is 5.
<pid> Specifies the process id.

DisablePeriodicSnapshot

The DisablePeriodicSnapshot option disables periodic snapshots for all processes specified by the enableperiodicsnapshot option.

Syntax

wpr -disableperiodicsnapshot <snapshot option>

Example

wpr -disableperiodicsnapshot heap

The following table describes the available switches that you can apply to this option.

Switch Description
<snapshot option> Specifies one of the snapshot option types.

PMCSources

The PMCSources option queries the list of PMU (Performance Monitoring Unit) events on the system and their default interval value for the counter overflow. The interval is the number of events.

Syntax

wpr -pmcsources

Note

Performance Monitor Unit events are used to measure CPU performance and understand workloads CPU characterization. Only a subset of PMU events in Arm/intel reference documents are implemented in Windows HAL. The example output of this option on Intel CPU device is below:

C:\Program Files (x86)\Windows Kits\10\Windows Performance Toolkit>wpr -pmcsources
Id  Name                        Interval  Min      Max
--------------------------------------------------------------
  0 Timer                          10000  1221    1000000
  2 TotalIssues                   698400  4096 2147483647
  6 BranchInstructions             65536  4096 2147483647
 10 CacheMisses                    65536  4096 2147483647
 11 BranchMispredictions           65536  4096 2147483647
 19 TotalCycles                    65536  4096 2147483647
 25 UnhaltedCoreCycles             65536  4096 2147483647
 26 InstructionRetired             65536  4096 2147483647
 27 UnhaltedReferenceCycles        65536  4096 2147483647
 28 LLCReference                   65536  4096 2147483647
 29 LLCMisses                      65536  4096 2147483647
 30 BranchInstructionRetired       65536  4096 2147483647
 31 BranchMispredictsRetired       65536  4096 2147483647
 32 LbrInserts                     65536  4096 2147483647

PMCSessions

The PMCSessions options query the list of sessions using hardware counters. This option is only available on Windows 11 or later.

Syntax

wpr -pmcsessions

ProfInt

The ProfInt option queries the “profiling” interval.

Syntax

wpr -profint

Example

C:\Program Files (x86)\Windows Kits\10\Windows Performance Toolkit>wpr -profint
Current Profile Interval = 10000 [1.0000ms]

SetProfInt

The SetProfInt option sets the sampling profile interval for PMU events. If PMU event name is omitted, the default is Timer.

Syntax

wpr -setprofint [PMU event name] 1221...10000000

Example

C:\Program Files (x86)\Windows Kits\10\Windows Performance Toolkit>wpr -setprofint 100000
New Profile Interval = 100000 [10.0000ms]

C:\Program Files (x86)\Windows Kits\10\Windows Performance Toolkit>wpr -setprofint TotalIssues 1000000
New Profile Interval = 100000 [Counter: TotalIssues]

ResetProfInt

The ResetProfInt option resets the profile interval to the default value.

Syntax

wpr -resetprofint [Profile Source Name]

Note that if [Profile Source Name] is not provided, all profile sources will be reset to the default value.

Instancename

The Instancename option specifies a name to uniquely identify the tracing instance.

This option can be applied to any commands that manipulate the logging session and assigns a user supplied logging session name. WPR sets the default session name if this option is omitted.

Syntax

wpr –{option <arguments>} -instancename <text>

Note

-instancename must be the last parameter. If the logging sessions were started with this option, all the subsequent commands should use the same instancename option. For example:

C:\wpt>wpr -start cpu -instancename CpuSession
C:\wpt>wpr -status -instancename CpuSession
WPR recording is in progress...
...
Time since start        : 00:00:05
Dropped event           : 0
Logging mode            : Memory
C:\wpt>wpr -stop cpu.etl  -> omitting instancename option would not find CpuSession
        There are no trace profiles running.
        Error code: 0xc5583000
C:\wpt>wpr -stop cpu.etl -instancename CpuSession  -> trace will be saved

Remarks

Each time that WPR saves a trace that was captured when managed applications were running on the system, WPR saves managed symbols next to the trace file. This feature enables performance analysis of managed applications.

Generating managed symbols is a resource- and time-consuming operation. WPR automatically creates a managed symbol cache to expedite the generation of managed symbols. When WPR needs managed symbols, it first checks this cache and uses any available and appropriate symbols instead of regenerating them.

The default managed symbol cache location is C:\ProgramData\WindowsPerformanceRecorder\NGenPdbs_Cache.

WPR Reference