OID_WDI_SET_ADAPTER_CONFIGURATION
Important
This topic is part of the WDI driver model released in Windows 10. The WDI driver model is in maintenance mode and will only receive high priority fixes. WiFiCx is the Wi-Fi driver model released in Windows 11. We recommend that you use WiFiCx to take advantage of the latest features.
OID_WDI_SET_ADAPTER_CONFIGURATION configures the adapter. It is an optional property and can only be sent before any ports are created.
| Scope | Set serialized with task | Normal execution time (seconds) |
|---|---|---|
| Adapter | Yes | 1 |
Set property parameters
| TLV | Multiple TLV instances allowed | Optional | Description |
|---|---|---|---|
| WDI_TLV_CONFIGURED_MAC_ADDRESS | X | MAC address. | |
| WDI_TLV_UNREACHABLE_DETECTION_THRESHOLD | X | Unreachable detection threshold. | |
| WDI_TLV_P2P_GO_INTERNAL_RESET_POLICY | X | Policy used by the firmware for operating channel selection after a Wi-Fi Direct GO Reset is stopped/restarted. | |
| WDI_TLV_BAND_ID_LIST | X | List of band IDs. | |
| WDI_TLV_LINK_QUALITY_BAR_MAP | Mapping of signal quality to Wi-Fi signal strength bars. This field should be ignored by the adapter and it should use the behavior specified in NDIS_STATUS_WDI_INDICATION_LINK_STATE_CHANGE for doing Link Quality notifications. | ||
| WDI_TLV_ADAPTER_NLO_SCAN_MODE | X | Indicates whether the NLO scans should be performed in active or passive mode. | |
| WDI_TLV_PLDR_SUPPORT | Added in Windows 10, version 1511, WDI version 1.0.10.
Specifies if PLDR is supported. |
Set property results
No additional data. The data in the header is sufficient.
Requirements
Minimum supported client |
Windows 10 |
Minimum supported server |
Windows Server 2016 |
Header |
Dot11wdi.h |