Array.Sort Methode
Definition
Wichtig
Einige Informationen beziehen sich auf Vorabversionen, die vor dem Release ggf. grundlegend überarbeitet werden. Microsoft übernimmt hinsichtlich der hier bereitgestellten Informationen keine Gewährleistungen, seien sie ausdrücklich oder konkludent.
Sortiert die Elemente in einem eindimensionalen Array.
Überlädt
Sort(Array, Array, Int32, Int32, IComparer) |
Sortiert einen Bereich von Elementen in einem Paar von eindimensionalen Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei den angegebenen IComparer. |
Sort(Array, Int32, Int32, IComparer) |
Sortiert die Elemente in einem Bereich von Elementen in einem eindimensionalen Array mithilfe des angegebenen IComparer. |
Sort(Array, Array, Int32, Int32) |
Sortiert einen Bereich von Elementen in einem Paar von eindimensionalen Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die IComparable-Implementierung jedes Schlüssels. |
Sort(Array, Int32, Int32) |
Sortiert die Elemente in einem Bereich von Elementen in einem eindimensionalen Array mithilfe der IComparable-Implementierung jedes Elements des Array. |
Sort(Array, Array, IComparer) |
Sortiert ein Paar von eindimensionalen Array-Objekten (ein Objekt enthält die Schlüssel und das andere die entsprechenden Elemente) nach den Schlüsseln im ersten Array und verwendet dabei den angegebenen IComparer. |
Sort(Array, Array) |
Sortiert ein Paar eindimensionaler Array-Objekte (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die IComparable-Implementierung der einzelnen Schlüssel. |
Sort(Array) |
Sortiert die Elemente in einem ganzen eindimensionalen Array mithilfe der IComparable-Implementierung jedes Elements des Array. |
Sort(Array, IComparer) |
Sortiert die Elemente in einem eindimensionalen Array mithilfe des angegebenen IComparer. |
Sort<T>(T[]) |
Sortiert die Elemente in einem ganzen Array mithilfe der Implementierung der generischen IComparable<T>-Schnittstelle jedes Elements des Array. |
Sort<T>(T[], IComparer<T>) |
Sortiert die Elemente in einem Array mithilfe der angegebenen generischen IComparer<T>-Schnittstelle. |
Sort<T>(T[], Comparison<T>) |
Sortiert die Elemente in einem Array mithilfe des angegebenen Comparison<T>. |
Sort<T>(T[], Int32, Int32) |
Sortiert die Elemente in einem Bereich von Elementen in einem Array mithilfe der Implementierung der generischen IComparable<T>-Schnittstelle jedes Elements des Array. |
Sort<T>(T[], Int32, Int32, IComparer<T>) |
Sortiert die Elemente in einem Bereich von Elementen im Array mithilfe der angegebenen generischen IComparer<T>-Schnittstelle. |
Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) |
Sortiert einen Bereich von Elementen in einem Paar von Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die angegebene generische IComparer<T>-Schnittstelle. |
Sort<TKey,TValue>(TKey[], TValue[]) |
Sortiert ein Paar von Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die Implementierung der generischen IComparable<T>-Schnittstelle jedes Schlüssels. |
Sort<TKey,TValue>(TKey[], TValue[], IComparer<TKey>) |
Sortiert ein Paar von Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die angegebene generische IComparer<T>-Schnittstelle. |
Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32) |
Sortiert einen Bereich von Elementen in einem Paar von Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die Implementierung der generischen IComparable<T>-Schnittstelle jedes Schlüssels. |
Sort(Array, Array, Int32, Int32, IComparer)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
public:
static void Sort(Array ^ keys, Array ^ items, int index, int length, System::Collections::IComparer ^ comparer);
public static void Sort (Array keys, Array items, int index, int length, System.Collections.IComparer comparer);
public static void Sort (Array keys, Array? items, int index, int length, System.Collections.IComparer? comparer);
static member Sort : Array * Array * int * int * System.Collections.IComparer -> unit
Public Shared Sub Sort (keys As Array, items As Array, index As Integer, length As Integer, comparer As IComparer)
Parameter
- items
- Array
Das eindimensionale Array mit den Elementen, die den jeweiligen Schlüsseln im keys
Array entsprechen.
- oder -
null
, wenn nur das keys
Array sortiert werden soll.
- index
- Int32
Der Startindex des zu sortierenden Bereichs.
- length
- Int32
Die Anzahl der Elemente im zu sortierenden Bereich.
- comparer
- IComparer
Die IComparer-Implementierung, die beim Vergleich von Elementen verwendet werden soll.
- oder -
null
, wenn die IComparable-Implementierung des jeweiligen Elements verwendet werden soll.
Ausnahmen
keys
ist null
.
index
ist kleiner als die untere keys
-Grenze.
- oder -
length
ist kleiner als Null.
items
ist nicht null
, und die Untergrenze von keys
entspricht nicht der Untergrenze von items
.
- oder -
items
ist nicht null
, und die Länge von keys
ist größer als die Länge von items
.
- oder -
index
und length
geben keinen gültigen Bereich im keys
Array an.
- oder -
items
ist nicht null
, und index
und length
geben keinen gültigen Bereich im items
Array an.
- oder -
Die Implementierung von comparer
hat einen Fehler während der Sortierung verursacht. Beispielsweise gibt comparer
beim Vergleichen eines Elements mit sich selbst möglicherweise nicht 0 zurück.
comparer
ist null
, und in einem oder mehreren Elementen im keys
Array ist die IComparable-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Codebeispiel wird gezeigt, wie zwei zugeordnete Arrays sortiert werden, bei denen das erste Array die Schlüssel und das zweite Array die Werte enthält. Die Sortierung erfolgt mithilfe des Standardvergleichs und eines benutzerdefinierten Vergleichs, der die Sortierreihenfolge umkehrt. Beachten Sie, dass das Ergebnis je nach aktuellem CultureInfovariieren kann.
using namespace System;
using namespace System::Collections;
public ref class myReverserClass: public IComparer
{
private:
// Calls CaseInsensitiveComparer::Compare with the parameters reversed.
virtual int Compare( Object^ x, Object^ y ) = IComparer::Compare
{
return ((gcnew CaseInsensitiveComparer)->Compare( y, x ));
}
};
void PrintKeysAndValues( array<String^>^myKeys, array<String^>^myValues )
{
for ( int i = 0; i < myKeys->Length; i++ )
{
Console::WriteLine( " {0, -10}: {1}", myKeys[ i ], myValues[ i ] );
}
Console::WriteLine();
}
int main()
{
// Creates and initializes a new Array and a new custom comparer.
array<String^>^myKeys = {"red","GREEN","YELLOW","BLUE","purple","black","orange"};
array<String^>^myValues = {"strawberries","PEARS","LIMES","BERRIES","grapes","olives","cantaloupe"};
IComparer^ myComparer = gcnew myReverserClass;
// Displays the values of the Array.
Console::WriteLine( "The Array initially contains the following values:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the default comparer.
Array::Sort( myKeys, myValues, 1, 3 );
Console::WriteLine( "After sorting a section of the Array using the default comparer:" );
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array::Sort( myKeys, myValues, 1, 3, myComparer );
Console::WriteLine( "After sorting a section of the Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the default comparer.
Array::Sort( myKeys, myValues );
Console::WriteLine( "After sorting the entire Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the reverse case-insensitive comparer.
Array::Sort( myKeys, myValues, myComparer );
Console::WriteLine( "After sorting the entire Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
}
/*
This code produces the following output.
The Array initially contains the following values:
red : strawberries
GREEN : PEARS
YELLOW : LIMES
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the default comparer:
red : strawberries
BLUE : BERRIES
GREEN : PEARS
YELLOW : LIMES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the reverse case-insensitive comparer:
red : strawberries
YELLOW : LIMES
GREEN : PEARS
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting the entire Array using the default comparer:
black : olives
BLUE : BERRIES
GREEN : PEARS
orange : cantaloupe
purple : grapes
red : strawberries
YELLOW : LIMES
After sorting the entire Array using the reverse case-insensitive comparer:
YELLOW : LIMES
red : strawberries
purple : grapes
orange : cantaloupe
GREEN : PEARS
BLUE : BERRIES
black : olives
*/
using System;
using System.Collections;
public class SamplesArray {
public class myReverserClass : IComparer {
// Calls CaseInsensitiveComparer.Compare with the parameters reversed.
int IComparer.Compare( Object x, Object y ) {
return( (new CaseInsensitiveComparer()).Compare( y, x ) );
}
}
public static void Main() {
// Creates and initializes a new Array and a new custom comparer.
String[] myKeys = { "red", "GREEN", "YELLOW", "BLUE", "purple", "black", "orange" };
String[] myValues = { "strawberries", "PEARS", "LIMES", "BERRIES", "grapes", "olives", "cantaloupe" };
IComparer myComparer = new myReverserClass();
// Displays the values of the Array.
Console.WriteLine( "The Array initially contains the following values:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the default comparer.
Array.Sort( myKeys, myValues, 1, 3 );
Console.WriteLine( "After sorting a section of the Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort( myKeys, myValues, 1, 3, myComparer );
Console.WriteLine( "After sorting a section of the Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the default comparer.
Array.Sort( myKeys, myValues );
Console.WriteLine( "After sorting the entire Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort( myKeys, myValues, myComparer );
Console.WriteLine( "After sorting the entire Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
}
public static void PrintKeysAndValues( String[] myKeys, String[] myValues ) {
for ( int i = 0; i < myKeys.Length; i++ ) {
Console.WriteLine( " {0,-10}: {1}", myKeys[i], myValues[i] );
}
Console.WriteLine();
}
}
/*
This code produces the following output.
The Array initially contains the following values:
red : strawberries
GREEN : PEARS
YELLOW : LIMES
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the default comparer:
red : strawberries
BLUE : BERRIES
GREEN : PEARS
YELLOW : LIMES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the reverse case-insensitive comparer:
red : strawberries
YELLOW : LIMES
GREEN : PEARS
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting the entire Array using the default comparer:
black : olives
BLUE : BERRIES
GREEN : PEARS
orange : cantaloupe
purple : grapes
red : strawberries
YELLOW : LIMES
After sorting the entire Array using the reverse case-insensitive comparer:
YELLOW : LIMES
red : strawberries
purple : grapes
orange : cantaloupe
GREEN : PEARS
BLUE : BERRIES
black : olives
*/
open System
open System.Collections
type MyReverserClass() =
interface IComparer with
member _.Compare(x, y) =
// Calls CaseInsensitiveComparer.Compare with the parameters reversed.
CaseInsensitiveComparer().Compare(y, x)
let printKeysAndValues (myKeys: string []) (myValues: string []) =
for i = 0 to myKeys.Length - 1 do
printfn $" {myKeys[i],-10}: {myValues[i]}"
printfn ""
// Creates and initializes a new Array and a new custom comparer.
let myKeys = [| "red"; "GREEN"; "YELLOW"; "BLUE"; "purple"; "black"; "orange" |]
let myValues = [| "strawberries"; "PEARS"; "LIMES"; "BERRIES"; "grapes"; "olives"; "cantaloupe" |]
let myComparer = MyReverserClass()
// Displays the values of the Array.
printfn "The Array initially contains the following values:"
printKeysAndValues myKeys myValues
// Sorts a section of the Array using the default comparer.
Array.Sort(myKeys, myValues, 1, 3)
printfn "After sorting a section of the Array using the default comparer:"
printKeysAndValues myKeys myValues
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, 1, 3, myComparer)
printfn "After sorting a section of the Array using the reverse case-insensitive comparer:"
printKeysAndValues myKeys myValues
// Sorts the entire Array using the default comparer.
Array.Sort(myKeys, myValues)
printfn "After sorting the entire Array using the default comparer:"
printKeysAndValues myKeys myValues
// Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, myComparer)
printfn "After sorting the entire Array using the reverse case-insensitive comparer:"
printKeysAndValues myKeys myValues
// This code produces the following output.
// The Array initially contains the following values:
// red : strawberries
// GREEN : PEARS
// YELLOW : LIMES
// BLUE : BERRIES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting a section of the Array using the default comparer:
// red : strawberries
// BLUE : BERRIES
// GREEN : PEARS
// YELLOW : LIMES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting a section of the Array using the reverse case-insensitive comparer:
// red : strawberries
// YELLOW : LIMES
// GREEN : PEARS
// BLUE : BERRIES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting the entire Array using the default comparer:
// black : olives
// BLUE : BERRIES
// GREEN : PEARS
// orange : cantaloupe
// purple : grapes
// red : strawberries
// YELLOW : LIMES
//
// After sorting the entire Array using the reverse case-insensitive comparer:
// YELLOW : LIMES
// red : strawberries
// purple : grapes
// orange : cantaloupe
// GREEN : PEARS
// BLUE : BERRIES
// black : olives
Imports System.Collections
Public Class SamplesArray
Public Class myReverserClass
Implements IComparer
' Calls CaseInsensitiveComparer.Compare with the parameters reversed.
Function Compare(x As [Object], y As [Object]) As Integer _
Implements IComparer.Compare
Return New CaseInsensitiveComparer().Compare(y, x)
End Function 'IComparer.Compare
End Class
Public Shared Sub Main()
' Creates and initializes a new Array and a new custom comparer.
Dim myKeys As [String]() = {"red", "GREEN", "YELLOW", "BLUE", "purple", "black", "orange"}
Dim myValues As [String]() = {"strawberries", "PEARS", "LIMES", "BERRIES", "grapes", "olives", "cantaloupe"}
Dim myComparer = New myReverserClass()
' Displays the values of the Array.
Console.WriteLine("The Array initially contains the following values:")
PrintKeysAndValues(myKeys, myValues)
' Sorts a section of the Array using the default comparer.
Array.Sort(myKeys, myValues, 1, 3)
Console.WriteLine("After sorting a section of the Array using the default comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, 1, 3, myComparer)
Console.WriteLine("After sorting a section of the Array using the reverse case-insensitive comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts the entire Array using the default comparer.
Array.Sort(myKeys, myValues)
Console.WriteLine("After sorting the entire Array using the default comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, myComparer)
Console.WriteLine("After sorting the entire Array using the reverse case-insensitive comparer:")
PrintKeysAndValues(myKeys, myValues)
End Sub
Public Shared Sub PrintKeysAndValues(myKeys() As [String], myValues() As [String])
Dim i As Integer
For i = 0 To myKeys.Length - 1
Console.WriteLine(" {0,-10}: {1}", myKeys(i), myValues(i))
Next i
Console.WriteLine()
End Sub
End Class
'This code produces the following output.
'
'The Array initially contains the following values:
' red : strawberries
' GREEN : PEARS
' YELLOW : LIMES
' BLUE : BERRIES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting a section of the Array using the default comparer:
' red : strawberries
' BLUE : BERRIES
' GREEN : PEARS
' YELLOW : LIMES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting a section of the Array using the reverse case-insensitive comparer:
' red : strawberries
' YELLOW : LIMES
' GREEN : PEARS
' BLUE : BERRIES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting the entire Array using the default comparer:
' black : olives
' BLUE : BERRIES
' GREEN : PEARS
' orange : cantaloupe
' purple : grapes
' red : strawberries
' YELLOW : LIMES
'
'After sorting the entire Array using the reverse case-insensitive comparer:
' YELLOW : LIMES
' red : strawberries
' purple : grapes
' orange : cantaloupe
' GREEN : PEARS
' BLUE : BERRIES
' black : olives
Hinweise
Jeder Schlüssel in verfügt keys
Array über ein entsprechendes Element im items
Array. Wenn ein Schlüssel während der Sortierung neu positioniert wird, wird das entsprechende Element in der items
Array ähnlich neu positioniert. Daher wird der items
Array nach der Anordnung der entsprechenden Schlüssel im keys
Arraysortiert.
Wenn comparer
ist null
, muss jeder Schlüssel innerhalb des angegebenen Bereichs von Elementen in die keys
ArrayIComparable -Schnittstelle implementieren, um Vergleiche mit jedem anderen Schlüssel durchführen zu können.
Sie können sortieren, wenn es mehr Elemente als Schlüssel gibt, aber die Elemente, die keine entsprechenden Schlüssel haben, werden nicht sortiert. Sie können nicht sortieren, wenn mehr Schlüssel als Elemente vorhanden sind. Dadurch wird ein ArgumentExceptionausgelöst.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
.NET enthält vordefinierte IComparer Implementierungen, die in der folgenden Tabelle aufgeführt sind.
Implementierung | Beschreibung |
---|---|
System.Collections.CaseInsensitiveComparer | Vergleicht zwei beliebige Objekte, führt jedoch einen Vergleich der Groß-/Kleinschreibung von Zeichenfolgen durch. |
Comparer.Default | Vergleicht zwei beliebige Objekte mithilfe der Sortierkonventionen der aktuellen Kultur. |
Comparer.DefaultInvariant | Vergleicht zwei beliebige Objekte mithilfe der Sortierkonventionen der invarianten Kultur. |
Comparer<T>.Default | Vergleicht zwei Objekte vom Typ T mithilfe der Standardsortierreihenfolge des Typs. |
Sie können auch benutzerdefinierte Vergleiche unterstützen, indem Sie eine instance Ihrer eigenen IComparer Implementierung für den comparer
Parameter bereitstellen. Im Beispiel wird hierzu eine benutzerdefinierte IComparer Implementierung definiert, die die Standardsortierreihenfolge umkehrt und einen Zeichenfolgenvergleich ohne Beachtung der Groß-/Kleinschreibung durchführt.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner oder gleich 16 Elemente ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der Elemente bei, die gleich sind.
Bei dieser Methode handelt es sich um einen O(n
log n
)-Vorgang, wobei n
ist length
.
Hinweise für Aufrufer
.NET Framework 4 und früheren Versionen wurden nur der Quicksort-Algorithmus verwendet. Quicksort identifiziert ungültige Vergleiche in einigen Situationen, in denen der Sortiervorgang eine IndexOutOfRangeException Ausnahme auslöst, und löst eine Ausnahme für den Aufrufer aus ArgumentException . Ab .NET Framework 4.5 ist es möglich, dass sortiervorgänge, die zuvor ausgelöst ArgumentException wurden, keine Ausnahme auslösen, da die Einfügesortierungs- und Heapsortalgorithmen keinen ungültigen Vergleich erkennen. Dies gilt in den meisten Fällen für Arrays mit weniger als oder gleich 16 Elementen.
Weitere Informationen
- IComparer
- IComparable
- BinarySearch
- Durchführen kulturunabhängiger Zeichenfolgenoperationen in Arrays
Gilt für:
Sort(Array, Int32, Int32, IComparer)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
public:
static void Sort(Array ^ array, int index, int length, System::Collections::IComparer ^ comparer);
public static void Sort (Array array, int index, int length, System.Collections.IComparer comparer);
public static void Sort (Array array, int index, int length, System.Collections.IComparer? comparer);
static member Sort : Array * int * int * System.Collections.IComparer -> unit
Public Shared Sub Sort (array As Array, index As Integer, length As Integer, comparer As IComparer)
Parameter
- index
- Int32
Der Startindex des zu sortierenden Bereichs.
- length
- Int32
Die Anzahl der Elemente im zu sortierenden Bereich.
- comparer
- IComparer
Die IComparer-Implementierung, die beim Vergleich von Elementen verwendet werden soll.
- oder -
null
, wenn die IComparable-Implementierung des jeweiligen Elements verwendet werden soll.
Ausnahmen
array
ist null
.
array
ist mehrdimensional.
index
ist kleiner als die untere array
-Grenze.
- oder -
length
ist kleiner als Null.
index
und length
geben keinen gültigen Bereich im array
an.
- oder -
Die Implementierung von comparer
hat einen Fehler während der Sortierung verursacht. Beispielsweise gibt comparer
beim Vergleichen eines Elements mit sich selbst möglicherweise nicht 0 zurück.
comparer
ist null
, und in einem oder mehreren Elementen in array
ist die IComparable-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Codebeispiel wird gezeigt, wie die Werte in einem Array mithilfe des Standardvergleichs und eines benutzerdefinierten Vergleichs sortiert werden, der die Sortierreihenfolge umkehrt. Beachten Sie, dass das Ergebnis je nach aktuellem CultureInfovariieren kann.
using namespace System;
using namespace System::Collections;
public ref class ReverseComparer : IComparer
{
public:
// Call CaseInsensitiveComparer::Compare with the parameters reversed.
virtual int Compare(Object^ x, Object^ y) = IComparer::Compare
{
return ((gcnew CaseInsensitiveComparer)->Compare(y, x));
}
};
void DisplayValues(array<String^>^ arr)
{
for (int i = arr->GetLowerBound(0); i <= arr->GetUpperBound(0); i++)
Console::WriteLine( " [{0}] : {1}", i, arr[ i ] );
Console::WriteLine();
}
int main()
{
// Create and initialize a new array. and a new custom comparer.
array<String^>^ words = { "The","QUICK","BROWN","FOX","jumps",
"over","the","lazy","dog" };
// Instantiate the reverse comparer.
IComparer^ revComparer = gcnew ReverseComparer();
// Display the values of the Array.
Console::WriteLine( "The original order of elements in the array:" );
DisplayValues(words);
// Sort a section of the array using the default comparer.
Array::Sort(words, 1, 3);
Console::WriteLine( "After sorting elements 1-3 by using the default comparer:");
DisplayValues(words);
// Sort a section of the array using the reverse case-insensitive comparer.
Array::Sort(words, 1, 3, revComparer);
Console::WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:");
DisplayValues(words);
// Sort the entire array using the default comparer.
Array::Sort(words);
Console::WriteLine( "After sorting the entire array by using the default comparer:");
DisplayValues(words);
// Sort the entire array by using the reverse case-insensitive comparer.
Array::Sort(words, revComparer);
Console::WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:");
DisplayValues(words);
}
/*
This code produces the following output.
The Array initially contains the following values:
[0] : The
[1] : QUICK
[2] : BROWN
[3] : FOX
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting a section of the Array using the default comparer:
[0] : The
[1] : BROWN
[2] : FOX
[3] : QUICK
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting a section of the Array using the reverse case-insensitive comparer:
[0] : The
[1] : QUICK
[2] : FOX
[3] : BROWN
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting the entire Array using the default comparer:
[0] : BROWN
[1] : dog
[2] : FOX
[3] : jumps
[4] : lazy
[5] : over
[6] : QUICK
[7] : the
[8] : The
After sorting the entire Array using the reverse case-insensitive comparer:
[0] : the
[1] : The
[2] : QUICK
[3] : over
[4] : lazy
[5] : jumps
[6] : FOX
[7] : dog
[8] : BROWN
*/
using System;
using System.Collections;
public class ReverseComparer : IComparer
{
// Call CaseInsensitiveComparer.Compare with the parameters reversed.
public int Compare(Object x, Object y)
{
return (new CaseInsensitiveComparer()).Compare(y, x );
}
}
public class Example
{
public static void Main()
{
// Create and initialize a new array.
String[] words = { "The", "QUICK", "BROWN", "FOX", "jumps",
"over", "the", "lazy", "dog" };
// Instantiate the reverse comparer.
IComparer revComparer = new ReverseComparer();
// Display the values of the array.
Console.WriteLine( "The original order of elements in the array:" );
DisplayValues(words);
// Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3);
Console.WriteLine( "After sorting elements 1-3 by using the default comparer:");
DisplayValues(words);
// Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer);
Console.WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:");
DisplayValues(words);
// Sort the entire array using the default comparer.
Array.Sort(words);
Console.WriteLine( "After sorting the entire array by using the default comparer:");
DisplayValues(words);
// Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer);
Console.WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:");
DisplayValues(words);
}
public static void DisplayValues(String[] arr)
{
for ( int i = arr.GetLowerBound(0); i <= arr.GetUpperBound(0);
i++ ) {
Console.WriteLine( " [{0}] : {1}", i, arr[i] );
}
Console.WriteLine();
}
}
// The example displays the following output:
// The original order of elements in the array:
// [0] : The
// [1] : QUICK
// [2] : BROWN
// [3] : FOX
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the default comparer:
// [0] : The
// [1] : BROWN
// [2] : FOX
// [3] : QUICK
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the reverse case-insensitive comparer:
// [0] : The
// [1] : QUICK
// [2] : FOX
// [3] : BROWN
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting the entire array by using the default comparer:
// [0] : BROWN
// [1] : dog
// [2] : FOX
// [3] : jumps
// [4] : lazy
// [5] : over
// [6] : QUICK
// [7] : the
// [8] : The
//
// After sorting the entire array using the reverse case-insensitive comparer:
// [0] : the
// [1] : The
// [2] : QUICK
// [3] : over
// [4] : lazy
// [5] : jumps
// [6] : FOX
// [7] : dog
// [8] : BROWN
open System
open System.Collections
type ReverseComparer() =
interface IComparer with
member _.Compare(x, y) =
// Call CaseInsensitiveComparer.Compare with the parameters reversed.
CaseInsensitiveComparer().Compare(y, x)
let displayValues (arr: string []) =
for i = 0 to arr.Length - 1 do
printfn $" [{i}] : {arr[i]}"
printfn ""
// Create and initialize a new array.
let words =
[| "The"; "QUICK"; "BROWN"; "FOX"; "jumps"
"over"; "the"; "lazy"; "dog" |]
// Instantiate the reverse comparer.
let revComparer = ReverseComparer()
// Display the values of the array.
printfn "The original order of elements in the array:"
displayValues words
// Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3)
printfn "After sorting elements 1-3 by using the default comparer:"
displayValues words
// Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer)
printfn "After sorting elements 1-3 by using the reverse case-insensitive comparer:"
displayValues words
// Sort the entire array using the default comparer.
Array.Sort words
printfn "After sorting the entire array by using the default comparer:"
displayValues words
// Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer)
printfn "After sorting the entire array using the reverse case-insensitive comparer:"
displayValues words
// The example displays the following output:
// The original order of elements in the array:
// [0] : The
// [1] : QUICK
// [2] : BROWN
// [3] : FOX
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the default comparer:
// [0] : The
// [1] : BROWN
// [2] : FOX
// [3] : QUICK
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the reverse case-insensitive comparer:
// [0] : The
// [1] : QUICK
// [2] : FOX
// [3] : BROWN
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting the entire array by using the default comparer:
// [0] : BROWN
// [1] : dog
// [2] : FOX
// [3] : jumps
// [4] : lazy
// [5] : over
// [6] : QUICK
// [7] : the
// [8] : The
//
// After sorting the entire array using the reverse case-insensitive comparer:
// [0] : the
// [1] : The
// [2] : QUICK
// [3] : over
// [4] : lazy
// [5] : jumps
// [6] : FOX
// [7] : dog
// [8] : BROWN
Imports System.Collections
Public Class ReverseComparer : Implements IComparer
' Call CaseInsensitiveComparer.Compare with the parameters reversed.
Function Compare(x As Object, y As Object) As Integer _
Implements IComparer.Compare
Return New CaseInsensitiveComparer().Compare(y, x)
End Function
End Class
Public Module Example
Public Sub Main()
' Create and initialize a new array.
Dim words() As String = { "The", "QUICK", "BROWN", "FOX", "jumps",
"over", "the", "lazy", "dog" }
' Instantiate a new custom comparer.
Dim revComparer As New ReverseComparer()
' Display the values of the array.
Console.WriteLine( "The original order of elements in the array:" )
DisplayValues(words)
' Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3)
Console.WriteLine( "After sorting elements 1-3 by using the default comparer:")
DisplayValues(words)
' Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer)
Console.WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:")
DisplayValues(words)
' Sort the entire array using the default comparer.
Array.Sort(words)
Console.WriteLine( "After sorting the entire array by using the default comparer:")
DisplayValues(words)
' Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer)
Console.WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:")
DisplayValues(words)
End Sub
Public Sub DisplayValues(arr() As String)
For i As Integer = arr.GetLowerBound(0) To arr.GetUpperBound(0)
Console.WriteLine(" [{0}] : {1}", i, arr(i))
Next
Console.WriteLine()
End Sub
End Module
' The example displays the following output:
' The original order of elements in the array:
' [0] : The
' [1] : QUICK
' [2] : BROWN
' [3] : FOX
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting elements 1-3 by using the default comparer:
' [0] : The
' [1] : BROWN
' [2] : FOX
' [3] : QUICK
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting elements 1-3 by using the reverse case-insensitive comparer:
' [0] : The
' [1] : QUICK
' [2] : FOX
' [3] : BROWN
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting the entire array by using the default comparer:
' [0] : BROWN
' [1] : dog
' [2] : FOX
' [3] : jumps
' [4] : lazy
' [5] : over
' [6] : QUICK
' [7] : the
' [8] : The
'
' After sorting the entire array using the reverse case-insensitive comparer:
' [0] : the
' [1] : The
' [2] : QUICK
' [3] : over
' [4] : lazy
' [5] : jumps
' [6] : FOX
' [7] : dog
' [8] : BROWN
Hinweise
Wenn comparer
ist null
, muss jedes Element innerhalb des angegebenen Elementbereichs in array
die IComparable -Schnittstelle implementieren, um Vergleiche mit jedem anderen Element in zu array
erhalten.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
.NET enthält vordefinierte IComparer Implementierungen, die in der folgenden Tabelle aufgeführt sind.
Implementierung | Beschreibung |
---|---|
System.Collections.CaseInsensitiveComparer | Vergleicht zwei beliebige Objekte, führt jedoch einen Vergleich der Groß-/Kleinschreibung von Zeichenfolgen durch. |
Comparer.Default | Vergleicht zwei beliebige Objekte mithilfe der Sortierkonventionen der aktuellen Kultur. |
Comparer.DefaultInvariant | Vergleicht zwei beliebige Objekte mithilfe der Sortierkonventionen der invarianten Kultur. |
Comparer<T>.Default | Vergleicht zwei Objekte vom Typ T mithilfe der Standardsortierreihenfolge des Typs. |
Sie können auch benutzerdefinierte Vergleiche unterstützen, indem Sie eine instance Ihrer eigenen IComparer Implementierung für den comparer
Parameter bereitstellen. Im Beispiel wird dazu eine ReverseComparer
Klasse definiert, die die Standardsortierreihenfolge für Instanzen eines Typs umkehrt und einen Zeichenfolgenvergleich ohne Beachtung der Groß-/Kleinschreibung durchführt.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner oder gleich 16 Elemente ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der Elemente bei, die gleich sind.
Bei dieser Methode handelt es sich um einen O(n
log n
)-Vorgang, wobei n
ist length
.
Hinweise für Aufrufer
.NET Framework 4 und früheren Versionen wurden nur der Quicksort-Algorithmus verwendet. Quicksort identifiziert ungültige Vergleiche in einigen Situationen, in denen der Sortiervorgang eine IndexOutOfRangeException Ausnahme auslöst, und löst eine Ausnahme für den Aufrufer aus ArgumentException . Ab .NET Framework 4.5 ist es möglich, dass sortiervorgänge, die zuvor ausgelöst ArgumentException wurden, keine Ausnahme auslösen, da die Einfügesortierungs- und Heapsortalgorithmen keinen ungültigen Vergleich erkennen. Dies gilt in den meisten Fällen für Arrays mit weniger als oder gleich 16 Elementen.
Weitere Informationen
- IComparer
- IComparable
- BinarySearch
- Durchführen kulturunabhängiger Zeichenfolgenoperationen in Arrays
Gilt für:
Sort(Array, Array, Int32, Int32)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert einen Bereich von Elementen in einem Paar von eindimensionalen Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die IComparable-Implementierung jedes Schlüssels.
public:
static void Sort(Array ^ keys, Array ^ items, int index, int length);
public static void Sort (Array keys, Array items, int index, int length);
public static void Sort (Array keys, Array? items, int index, int length);
static member Sort : Array * Array * int * int -> unit
Public Shared Sub Sort (keys As Array, items As Array, index As Integer, length As Integer)
Parameter
- items
- Array
Das eindimensionale Array mit den Elementen, die den jeweiligen Schlüsseln im keys
Array entsprechen.
- oder -
null
, wenn nur das keys
Array sortiert werden soll.
- index
- Int32
Der Startindex des zu sortierenden Bereichs.
- length
- Int32
Die Anzahl der Elemente im zu sortierenden Bereich.
Ausnahmen
keys
ist null
.
index
ist kleiner als die untere keys
-Grenze.
- oder -
length
ist kleiner als Null.
items
ist nicht null
, und die Länge von keys
ist größer als die Länge von items
.
- oder -
index
und length
geben keinen gültigen Bereich im keys
Array an.
- oder -
items
ist nicht null
, und index
und length
geben keinen gültigen Bereich im items
Array an.
In einem oder mehreren Elementen in keys
Array ist die IComparable-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Codebeispiel wird gezeigt, wie zwei zugeordnete Arrays sortiert werden, bei denen das erste Array die Schlüssel und das zweite Array die Werte enthält. Die Sortierung erfolgt mithilfe des Standardvergleichs und eines benutzerdefinierten Vergleichs, der die Sortierreihenfolge umkehrt. Beachten Sie, dass das Ergebnis je nach aktuellem CultureInfovariieren kann.
using namespace System;
using namespace System::Collections;
public ref class myReverserClass: public IComparer
{
private:
// Calls CaseInsensitiveComparer::Compare with the parameters reversed.
virtual int Compare( Object^ x, Object^ y ) = IComparer::Compare
{
return ((gcnew CaseInsensitiveComparer)->Compare( y, x ));
}
};
void PrintKeysAndValues( array<String^>^myKeys, array<String^>^myValues )
{
for ( int i = 0; i < myKeys->Length; i++ )
{
Console::WriteLine( " {0, -10}: {1}", myKeys[ i ], myValues[ i ] );
}
Console::WriteLine();
}
int main()
{
// Creates and initializes a new Array and a new custom comparer.
array<String^>^myKeys = {"red","GREEN","YELLOW","BLUE","purple","black","orange"};
array<String^>^myValues = {"strawberries","PEARS","LIMES","BERRIES","grapes","olives","cantaloupe"};
IComparer^ myComparer = gcnew myReverserClass;
// Displays the values of the Array.
Console::WriteLine( "The Array initially contains the following values:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the default comparer.
Array::Sort( myKeys, myValues, 1, 3 );
Console::WriteLine( "After sorting a section of the Array using the default comparer:" );
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array::Sort( myKeys, myValues, 1, 3, myComparer );
Console::WriteLine( "After sorting a section of the Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the default comparer.
Array::Sort( myKeys, myValues );
Console::WriteLine( "After sorting the entire Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the reverse case-insensitive comparer.
Array::Sort( myKeys, myValues, myComparer );
Console::WriteLine( "After sorting the entire Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
}
/*
This code produces the following output.
The Array initially contains the following values:
red : strawberries
GREEN : PEARS
YELLOW : LIMES
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the default comparer:
red : strawberries
BLUE : BERRIES
GREEN : PEARS
YELLOW : LIMES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the reverse case-insensitive comparer:
red : strawberries
YELLOW : LIMES
GREEN : PEARS
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting the entire Array using the default comparer:
black : olives
BLUE : BERRIES
GREEN : PEARS
orange : cantaloupe
purple : grapes
red : strawberries
YELLOW : LIMES
After sorting the entire Array using the reverse case-insensitive comparer:
YELLOW : LIMES
red : strawberries
purple : grapes
orange : cantaloupe
GREEN : PEARS
BLUE : BERRIES
black : olives
*/
using System;
using System.Collections;
public class SamplesArray {
public class myReverserClass : IComparer {
// Calls CaseInsensitiveComparer.Compare with the parameters reversed.
int IComparer.Compare( Object x, Object y ) {
return( (new CaseInsensitiveComparer()).Compare( y, x ) );
}
}
public static void Main() {
// Creates and initializes a new Array and a new custom comparer.
String[] myKeys = { "red", "GREEN", "YELLOW", "BLUE", "purple", "black", "orange" };
String[] myValues = { "strawberries", "PEARS", "LIMES", "BERRIES", "grapes", "olives", "cantaloupe" };
IComparer myComparer = new myReverserClass();
// Displays the values of the Array.
Console.WriteLine( "The Array initially contains the following values:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the default comparer.
Array.Sort( myKeys, myValues, 1, 3 );
Console.WriteLine( "After sorting a section of the Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort( myKeys, myValues, 1, 3, myComparer );
Console.WriteLine( "After sorting a section of the Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the default comparer.
Array.Sort( myKeys, myValues );
Console.WriteLine( "After sorting the entire Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort( myKeys, myValues, myComparer );
Console.WriteLine( "After sorting the entire Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
}
public static void PrintKeysAndValues( String[] myKeys, String[] myValues ) {
for ( int i = 0; i < myKeys.Length; i++ ) {
Console.WriteLine( " {0,-10}: {1}", myKeys[i], myValues[i] );
}
Console.WriteLine();
}
}
/*
This code produces the following output.
The Array initially contains the following values:
red : strawberries
GREEN : PEARS
YELLOW : LIMES
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the default comparer:
red : strawberries
BLUE : BERRIES
GREEN : PEARS
YELLOW : LIMES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the reverse case-insensitive comparer:
red : strawberries
YELLOW : LIMES
GREEN : PEARS
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting the entire Array using the default comparer:
black : olives
BLUE : BERRIES
GREEN : PEARS
orange : cantaloupe
purple : grapes
red : strawberries
YELLOW : LIMES
After sorting the entire Array using the reverse case-insensitive comparer:
YELLOW : LIMES
red : strawberries
purple : grapes
orange : cantaloupe
GREEN : PEARS
BLUE : BERRIES
black : olives
*/
open System
open System.Collections
type MyReverserClass() =
interface IComparer with
member _.Compare(x, y) =
// Calls CaseInsensitiveComparer.Compare with the parameters reversed.
CaseInsensitiveComparer().Compare(y, x)
let printKeysAndValues (myKeys: string []) (myValues: string []) =
for i = 0 to myKeys.Length - 1 do
printfn $" {myKeys[i],-10}: {myValues[i]}"
printfn ""
// Creates and initializes a new Array and a new custom comparer.
let myKeys = [| "red"; "GREEN"; "YELLOW"; "BLUE"; "purple"; "black"; "orange" |]
let myValues = [| "strawberries"; "PEARS"; "LIMES"; "BERRIES"; "grapes"; "olives"; "cantaloupe" |]
let myComparer = MyReverserClass()
// Displays the values of the Array.
printfn "The Array initially contains the following values:"
printKeysAndValues myKeys myValues
// Sorts a section of the Array using the default comparer.
Array.Sort(myKeys, myValues, 1, 3)
printfn "After sorting a section of the Array using the default comparer:"
printKeysAndValues myKeys myValues
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, 1, 3, myComparer)
printfn "After sorting a section of the Array using the reverse case-insensitive comparer:"
printKeysAndValues myKeys myValues
// Sorts the entire Array using the default comparer.
Array.Sort(myKeys, myValues)
printfn "After sorting the entire Array using the default comparer:"
printKeysAndValues myKeys myValues
// Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, myComparer)
printfn "After sorting the entire Array using the reverse case-insensitive comparer:"
printKeysAndValues myKeys myValues
// This code produces the following output.
// The Array initially contains the following values:
// red : strawberries
// GREEN : PEARS
// YELLOW : LIMES
// BLUE : BERRIES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting a section of the Array using the default comparer:
// red : strawberries
// BLUE : BERRIES
// GREEN : PEARS
// YELLOW : LIMES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting a section of the Array using the reverse case-insensitive comparer:
// red : strawberries
// YELLOW : LIMES
// GREEN : PEARS
// BLUE : BERRIES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting the entire Array using the default comparer:
// black : olives
// BLUE : BERRIES
// GREEN : PEARS
// orange : cantaloupe
// purple : grapes
// red : strawberries
// YELLOW : LIMES
//
// After sorting the entire Array using the reverse case-insensitive comparer:
// YELLOW : LIMES
// red : strawberries
// purple : grapes
// orange : cantaloupe
// GREEN : PEARS
// BLUE : BERRIES
// black : olives
Imports System.Collections
Public Class SamplesArray
Public Class myReverserClass
Implements IComparer
' Calls CaseInsensitiveComparer.Compare with the parameters reversed.
Function Compare(x As [Object], y As [Object]) As Integer _
Implements IComparer.Compare
Return New CaseInsensitiveComparer().Compare(y, x)
End Function 'IComparer.Compare
End Class
Public Shared Sub Main()
' Creates and initializes a new Array and a new custom comparer.
Dim myKeys As [String]() = {"red", "GREEN", "YELLOW", "BLUE", "purple", "black", "orange"}
Dim myValues As [String]() = {"strawberries", "PEARS", "LIMES", "BERRIES", "grapes", "olives", "cantaloupe"}
Dim myComparer = New myReverserClass()
' Displays the values of the Array.
Console.WriteLine("The Array initially contains the following values:")
PrintKeysAndValues(myKeys, myValues)
' Sorts a section of the Array using the default comparer.
Array.Sort(myKeys, myValues, 1, 3)
Console.WriteLine("After sorting a section of the Array using the default comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, 1, 3, myComparer)
Console.WriteLine("After sorting a section of the Array using the reverse case-insensitive comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts the entire Array using the default comparer.
Array.Sort(myKeys, myValues)
Console.WriteLine("After sorting the entire Array using the default comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, myComparer)
Console.WriteLine("After sorting the entire Array using the reverse case-insensitive comparer:")
PrintKeysAndValues(myKeys, myValues)
End Sub
Public Shared Sub PrintKeysAndValues(myKeys() As [String], myValues() As [String])
Dim i As Integer
For i = 0 To myKeys.Length - 1
Console.WriteLine(" {0,-10}: {1}", myKeys(i), myValues(i))
Next i
Console.WriteLine()
End Sub
End Class
'This code produces the following output.
'
'The Array initially contains the following values:
' red : strawberries
' GREEN : PEARS
' YELLOW : LIMES
' BLUE : BERRIES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting a section of the Array using the default comparer:
' red : strawberries
' BLUE : BERRIES
' GREEN : PEARS
' YELLOW : LIMES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting a section of the Array using the reverse case-insensitive comparer:
' red : strawberries
' YELLOW : LIMES
' GREEN : PEARS
' BLUE : BERRIES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting the entire Array using the default comparer:
' black : olives
' BLUE : BERRIES
' GREEN : PEARS
' orange : cantaloupe
' purple : grapes
' red : strawberries
' YELLOW : LIMES
'
'After sorting the entire Array using the reverse case-insensitive comparer:
' YELLOW : LIMES
' red : strawberries
' purple : grapes
' orange : cantaloupe
' GREEN : PEARS
' BLUE : BERRIES
' black : olives
Hinweise
Jeder Schlüssel in verfügt keys
Array über ein entsprechendes Element im items
Array. Wenn ein Schlüssel während der Sortierung neu positioniert wird, wird das entsprechende Element in der items
Array ähnlich neu positioniert. Daher wird der items
Array nach der Anordnung der entsprechenden Schlüssel im keys
Arraysortiert.
Jeder Schlüssel innerhalb des angegebenen Bereichs von Elementen in muss keys
Array die IComparable Schnittstelle implementieren, um Vergleiche mit jedem anderen Schlüssel durchführen zu können.
Sie können sortieren, wenn es mehr Elemente als Schlüssel gibt, aber die Elemente, die keine entsprechenden Schlüssel haben, werden nicht sortiert. Sie können nicht sortieren, wenn mehr Schlüssel als Elemente vorhanden sind. Dadurch wird ein ArgumentExceptionausgelöst.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner oder gleich 16 Elemente ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der Elemente bei, die gleich sind.
Bei dieser Methode handelt es sich um einen O(n
log n
)-Vorgang, wobei n
ist length
.
Weitere Informationen
Gilt für:
Sort(Array, Int32, Int32)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert die Elemente in einem Bereich von Elementen in einem eindimensionalen Array mithilfe der IComparable-Implementierung jedes Elements des Array.
public:
static void Sort(Array ^ array, int index, int length);
public static void Sort (Array array, int index, int length);
static member Sort : Array * int * int -> unit
Public Shared Sub Sort (array As Array, index As Integer, length As Integer)
Parameter
- index
- Int32
Der Startindex des zu sortierenden Bereichs.
- length
- Int32
Die Anzahl der Elemente im zu sortierenden Bereich.
Ausnahmen
array
ist null
.
array
ist mehrdimensional.
index
ist kleiner als die untere array
-Grenze.
- oder -
length
ist kleiner als Null.
index
und length
geben keinen gültigen Bereich im array
an.
In einem oder mehreren Elementen in array
ist die IComparable-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Codebeispiel wird gezeigt, wie die Werte in einem Array mithilfe des Standardvergleichs und eines benutzerdefinierten Vergleichs sortiert werden, der die Sortierreihenfolge umkehrt. Beachten Sie, dass das Ergebnis je nach aktuellem CultureInfovariieren kann.
using namespace System;
using namespace System::Collections;
public ref class ReverseComparer : IComparer
{
public:
// Call CaseInsensitiveComparer::Compare with the parameters reversed.
virtual int Compare(Object^ x, Object^ y) = IComparer::Compare
{
return ((gcnew CaseInsensitiveComparer)->Compare(y, x));
}
};
void DisplayValues(array<String^>^ arr)
{
for (int i = arr->GetLowerBound(0); i <= arr->GetUpperBound(0); i++)
Console::WriteLine( " [{0}] : {1}", i, arr[ i ] );
Console::WriteLine();
}
int main()
{
// Create and initialize a new array. and a new custom comparer.
array<String^>^ words = { "The","QUICK","BROWN","FOX","jumps",
"over","the","lazy","dog" };
// Instantiate the reverse comparer.
IComparer^ revComparer = gcnew ReverseComparer();
// Display the values of the Array.
Console::WriteLine( "The original order of elements in the array:" );
DisplayValues(words);
// Sort a section of the array using the default comparer.
Array::Sort(words, 1, 3);
Console::WriteLine( "After sorting elements 1-3 by using the default comparer:");
DisplayValues(words);
// Sort a section of the array using the reverse case-insensitive comparer.
Array::Sort(words, 1, 3, revComparer);
Console::WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:");
DisplayValues(words);
// Sort the entire array using the default comparer.
Array::Sort(words);
Console::WriteLine( "After sorting the entire array by using the default comparer:");
DisplayValues(words);
// Sort the entire array by using the reverse case-insensitive comparer.
Array::Sort(words, revComparer);
Console::WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:");
DisplayValues(words);
}
/*
This code produces the following output.
The Array initially contains the following values:
[0] : The
[1] : QUICK
[2] : BROWN
[3] : FOX
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting a section of the Array using the default comparer:
[0] : The
[1] : BROWN
[2] : FOX
[3] : QUICK
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting a section of the Array using the reverse case-insensitive comparer:
[0] : The
[1] : QUICK
[2] : FOX
[3] : BROWN
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting the entire Array using the default comparer:
[0] : BROWN
[1] : dog
[2] : FOX
[3] : jumps
[4] : lazy
[5] : over
[6] : QUICK
[7] : the
[8] : The
After sorting the entire Array using the reverse case-insensitive comparer:
[0] : the
[1] : The
[2] : QUICK
[3] : over
[4] : lazy
[5] : jumps
[6] : FOX
[7] : dog
[8] : BROWN
*/
using System;
using System.Collections;
public class ReverseComparer : IComparer
{
// Call CaseInsensitiveComparer.Compare with the parameters reversed.
public int Compare(Object x, Object y)
{
return (new CaseInsensitiveComparer()).Compare(y, x );
}
}
public class Example
{
public static void Main()
{
// Create and initialize a new array.
String[] words = { "The", "QUICK", "BROWN", "FOX", "jumps",
"over", "the", "lazy", "dog" };
// Instantiate the reverse comparer.
IComparer revComparer = new ReverseComparer();
// Display the values of the array.
Console.WriteLine( "The original order of elements in the array:" );
DisplayValues(words);
// Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3);
Console.WriteLine( "After sorting elements 1-3 by using the default comparer:");
DisplayValues(words);
// Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer);
Console.WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:");
DisplayValues(words);
// Sort the entire array using the default comparer.
Array.Sort(words);
Console.WriteLine( "After sorting the entire array by using the default comparer:");
DisplayValues(words);
// Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer);
Console.WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:");
DisplayValues(words);
}
public static void DisplayValues(String[] arr)
{
for ( int i = arr.GetLowerBound(0); i <= arr.GetUpperBound(0);
i++ ) {
Console.WriteLine( " [{0}] : {1}", i, arr[i] );
}
Console.WriteLine();
}
}
// The example displays the following output:
// The original order of elements in the array:
// [0] : The
// [1] : QUICK
// [2] : BROWN
// [3] : FOX
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the default comparer:
// [0] : The
// [1] : BROWN
// [2] : FOX
// [3] : QUICK
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the reverse case-insensitive comparer:
// [0] : The
// [1] : QUICK
// [2] : FOX
// [3] : BROWN
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting the entire array by using the default comparer:
// [0] : BROWN
// [1] : dog
// [2] : FOX
// [3] : jumps
// [4] : lazy
// [5] : over
// [6] : QUICK
// [7] : the
// [8] : The
//
// After sorting the entire array using the reverse case-insensitive comparer:
// [0] : the
// [1] : The
// [2] : QUICK
// [3] : over
// [4] : lazy
// [5] : jumps
// [6] : FOX
// [7] : dog
// [8] : BROWN
open System
open System.Collections
type ReverseComparer() =
interface IComparer with
member _.Compare(x, y) =
// Call CaseInsensitiveComparer.Compare with the parameters reversed.
CaseInsensitiveComparer().Compare(y, x)
let displayValues (arr: string []) =
for i = 0 to arr.Length - 1 do
printfn $" [{i}] : {arr[i]}"
printfn ""
// Create and initialize a new array.
let words =
[| "The"; "QUICK"; "BROWN"; "FOX"; "jumps"
"over"; "the"; "lazy"; "dog" |]
// Instantiate the reverse comparer.
let revComparer = ReverseComparer()
// Display the values of the array.
printfn "The original order of elements in the array:"
displayValues words
// Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3)
printfn "After sorting elements 1-3 by using the default comparer:"
displayValues words
// Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer)
printfn "After sorting elements 1-3 by using the reverse case-insensitive comparer:"
displayValues words
// Sort the entire array using the default comparer.
Array.Sort words
printfn "After sorting the entire array by using the default comparer:"
displayValues words
// Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer)
printfn "After sorting the entire array using the reverse case-insensitive comparer:"
displayValues words
// The example displays the following output:
// The original order of elements in the array:
// [0] : The
// [1] : QUICK
// [2] : BROWN
// [3] : FOX
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the default comparer:
// [0] : The
// [1] : BROWN
// [2] : FOX
// [3] : QUICK
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the reverse case-insensitive comparer:
// [0] : The
// [1] : QUICK
// [2] : FOX
// [3] : BROWN
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting the entire array by using the default comparer:
// [0] : BROWN
// [1] : dog
// [2] : FOX
// [3] : jumps
// [4] : lazy
// [5] : over
// [6] : QUICK
// [7] : the
// [8] : The
//
// After sorting the entire array using the reverse case-insensitive comparer:
// [0] : the
// [1] : The
// [2] : QUICK
// [3] : over
// [4] : lazy
// [5] : jumps
// [6] : FOX
// [7] : dog
// [8] : BROWN
Imports System.Collections
Public Class ReverseComparer : Implements IComparer
' Call CaseInsensitiveComparer.Compare with the parameters reversed.
Function Compare(x As Object, y As Object) As Integer _
Implements IComparer.Compare
Return New CaseInsensitiveComparer().Compare(y, x)
End Function
End Class
Public Module Example
Public Sub Main()
' Create and initialize a new array.
Dim words() As String = { "The", "QUICK", "BROWN", "FOX", "jumps",
"over", "the", "lazy", "dog" }
' Instantiate a new custom comparer.
Dim revComparer As New ReverseComparer()
' Display the values of the array.
Console.WriteLine( "The original order of elements in the array:" )
DisplayValues(words)
' Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3)
Console.WriteLine( "After sorting elements 1-3 by using the default comparer:")
DisplayValues(words)
' Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer)
Console.WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:")
DisplayValues(words)
' Sort the entire array using the default comparer.
Array.Sort(words)
Console.WriteLine( "After sorting the entire array by using the default comparer:")
DisplayValues(words)
' Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer)
Console.WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:")
DisplayValues(words)
End Sub
Public Sub DisplayValues(arr() As String)
For i As Integer = arr.GetLowerBound(0) To arr.GetUpperBound(0)
Console.WriteLine(" [{0}] : {1}", i, arr(i))
Next
Console.WriteLine()
End Sub
End Module
' The example displays the following output:
' The original order of elements in the array:
' [0] : The
' [1] : QUICK
' [2] : BROWN
' [3] : FOX
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting elements 1-3 by using the default comparer:
' [0] : The
' [1] : BROWN
' [2] : FOX
' [3] : QUICK
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting elements 1-3 by using the reverse case-insensitive comparer:
' [0] : The
' [1] : QUICK
' [2] : FOX
' [3] : BROWN
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting the entire array by using the default comparer:
' [0] : BROWN
' [1] : dog
' [2] : FOX
' [3] : jumps
' [4] : lazy
' [5] : over
' [6] : QUICK
' [7] : the
' [8] : The
'
' After sorting the entire array using the reverse case-insensitive comparer:
' [0] : the
' [1] : The
' [2] : QUICK
' [3] : over
' [4] : lazy
' [5] : jumps
' [6] : FOX
' [7] : dog
' [8] : BROWN
Hinweise
Jedes Element innerhalb des angegebenen Elementbereichs in array
muss die IComparable -Schnittstelle implementieren, um Vergleiche mit jedem anderen Element in zu array
erhalten.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner oder gleich 16 Elemente ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der Elemente bei, die gleich sind.
Bei dieser Methode handelt es sich um einen O(n
log n
)-Vorgang, wobei n
ist length
.
Weitere Informationen
Gilt für:
Sort(Array, Array, IComparer)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
public:
static void Sort(Array ^ keys, Array ^ items, System::Collections::IComparer ^ comparer);
public static void Sort (Array keys, Array items, System.Collections.IComparer comparer);
public static void Sort (Array keys, Array? items, System.Collections.IComparer? comparer);
static member Sort : Array * Array * System.Collections.IComparer -> unit
Public Shared Sub Sort (keys As Array, items As Array, comparer As IComparer)
Parameter
- items
- Array
Das eindimensionale Array mit den Elementen, die den jeweiligen Schlüsseln im keys
Array entsprechen.
- oder -
null
, wenn nur das keys
Array sortiert werden soll.
- comparer
- IComparer
Die IComparer-Implementierung, die beim Vergleich von Elementen verwendet werden soll.
- oder -
null
, wenn die IComparable-Implementierung des jeweiligen Elements verwendet werden soll.
Ausnahmen
keys
ist null
.
items
ist nicht null
, und die Länge von keys
ist größer als die Länge von items
.
- oder -
Die Implementierung von comparer
hat einen Fehler während der Sortierung verursacht. Beispielsweise gibt comparer
beim Vergleichen eines Elements mit sich selbst möglicherweise nicht 0 zurück.
comparer
ist null
, und in einem oder mehreren Elementen im keys
Array ist die IComparable-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Beispiel wird gezeigt, wie zwei zugeordnete Arrays sortiert werden, wobei das erste Array die Schlüssel und das zweite Array die Werte enthält. Die Sortierung erfolgt mithilfe des Standardvergleichs und eines benutzerdefinierten Vergleichs, der die Sortierreihenfolge umkehrt. Beachten Sie, dass das Ergebnis je nach aktuellem CultureInfovariieren kann.
using namespace System;
using namespace System::Collections;
public ref class myReverserClass: public IComparer
{
private:
// Calls CaseInsensitiveComparer::Compare with the parameters reversed.
virtual int Compare( Object^ x, Object^ y ) = IComparer::Compare
{
return ((gcnew CaseInsensitiveComparer)->Compare( y, x ));
}
};
void PrintKeysAndValues( array<String^>^myKeys, array<String^>^myValues )
{
for ( int i = 0; i < myKeys->Length; i++ )
{
Console::WriteLine( " {0, -10}: {1}", myKeys[ i ], myValues[ i ] );
}
Console::WriteLine();
}
int main()
{
// Creates and initializes a new Array and a new custom comparer.
array<String^>^myKeys = {"red","GREEN","YELLOW","BLUE","purple","black","orange"};
array<String^>^myValues = {"strawberries","PEARS","LIMES","BERRIES","grapes","olives","cantaloupe"};
IComparer^ myComparer = gcnew myReverserClass;
// Displays the values of the Array.
Console::WriteLine( "The Array initially contains the following values:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the default comparer.
Array::Sort( myKeys, myValues, 1, 3 );
Console::WriteLine( "After sorting a section of the Array using the default comparer:" );
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array::Sort( myKeys, myValues, 1, 3, myComparer );
Console::WriteLine( "After sorting a section of the Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the default comparer.
Array::Sort( myKeys, myValues );
Console::WriteLine( "After sorting the entire Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the reverse case-insensitive comparer.
Array::Sort( myKeys, myValues, myComparer );
Console::WriteLine( "After sorting the entire Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
}
/*
This code produces the following output.
The Array initially contains the following values:
red : strawberries
GREEN : PEARS
YELLOW : LIMES
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the default comparer:
red : strawberries
BLUE : BERRIES
GREEN : PEARS
YELLOW : LIMES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the reverse case-insensitive comparer:
red : strawberries
YELLOW : LIMES
GREEN : PEARS
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting the entire Array using the default comparer:
black : olives
BLUE : BERRIES
GREEN : PEARS
orange : cantaloupe
purple : grapes
red : strawberries
YELLOW : LIMES
After sorting the entire Array using the reverse case-insensitive comparer:
YELLOW : LIMES
red : strawberries
purple : grapes
orange : cantaloupe
GREEN : PEARS
BLUE : BERRIES
black : olives
*/
using System;
using System.Collections;
public class SamplesArray {
public class myReverserClass : IComparer {
// Calls CaseInsensitiveComparer.Compare with the parameters reversed.
int IComparer.Compare( Object x, Object y ) {
return( (new CaseInsensitiveComparer()).Compare( y, x ) );
}
}
public static void Main() {
// Creates and initializes a new Array and a new custom comparer.
String[] myKeys = { "red", "GREEN", "YELLOW", "BLUE", "purple", "black", "orange" };
String[] myValues = { "strawberries", "PEARS", "LIMES", "BERRIES", "grapes", "olives", "cantaloupe" };
IComparer myComparer = new myReverserClass();
// Displays the values of the Array.
Console.WriteLine( "The Array initially contains the following values:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the default comparer.
Array.Sort( myKeys, myValues, 1, 3 );
Console.WriteLine( "After sorting a section of the Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort( myKeys, myValues, 1, 3, myComparer );
Console.WriteLine( "After sorting a section of the Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the default comparer.
Array.Sort( myKeys, myValues );
Console.WriteLine( "After sorting the entire Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort( myKeys, myValues, myComparer );
Console.WriteLine( "After sorting the entire Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
}
public static void PrintKeysAndValues( String[] myKeys, String[] myValues ) {
for ( int i = 0; i < myKeys.Length; i++ ) {
Console.WriteLine( " {0,-10}: {1}", myKeys[i], myValues[i] );
}
Console.WriteLine();
}
}
/*
This code produces the following output.
The Array initially contains the following values:
red : strawberries
GREEN : PEARS
YELLOW : LIMES
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the default comparer:
red : strawberries
BLUE : BERRIES
GREEN : PEARS
YELLOW : LIMES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the reverse case-insensitive comparer:
red : strawberries
YELLOW : LIMES
GREEN : PEARS
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting the entire Array using the default comparer:
black : olives
BLUE : BERRIES
GREEN : PEARS
orange : cantaloupe
purple : grapes
red : strawberries
YELLOW : LIMES
After sorting the entire Array using the reverse case-insensitive comparer:
YELLOW : LIMES
red : strawberries
purple : grapes
orange : cantaloupe
GREEN : PEARS
BLUE : BERRIES
black : olives
*/
open System
open System.Collections
type MyReverserClass() =
interface IComparer with
member _.Compare(x, y) =
// Calls CaseInsensitiveComparer.Compare with the parameters reversed.
CaseInsensitiveComparer().Compare(y, x)
let printKeysAndValues (myKeys: string []) (myValues: string []) =
for i = 0 to myKeys.Length - 1 do
printfn $" {myKeys[i],-10}: {myValues[i]}"
printfn ""
// Creates and initializes a new Array and a new custom comparer.
let myKeys = [| "red"; "GREEN"; "YELLOW"; "BLUE"; "purple"; "black"; "orange" |]
let myValues = [| "strawberries"; "PEARS"; "LIMES"; "BERRIES"; "grapes"; "olives"; "cantaloupe" |]
let myComparer = MyReverserClass()
// Displays the values of the Array.
printfn "The Array initially contains the following values:"
printKeysAndValues myKeys myValues
// Sorts a section of the Array using the default comparer.
Array.Sort(myKeys, myValues, 1, 3)
printfn "After sorting a section of the Array using the default comparer:"
printKeysAndValues myKeys myValues
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, 1, 3, myComparer)
printfn "After sorting a section of the Array using the reverse case-insensitive comparer:"
printKeysAndValues myKeys myValues
// Sorts the entire Array using the default comparer.
Array.Sort(myKeys, myValues)
printfn "After sorting the entire Array using the default comparer:"
printKeysAndValues myKeys myValues
// Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, myComparer)
printfn "After sorting the entire Array using the reverse case-insensitive comparer:"
printKeysAndValues myKeys myValues
// This code produces the following output.
// The Array initially contains the following values:
// red : strawberries
// GREEN : PEARS
// YELLOW : LIMES
// BLUE : BERRIES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting a section of the Array using the default comparer:
// red : strawberries
// BLUE : BERRIES
// GREEN : PEARS
// YELLOW : LIMES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting a section of the Array using the reverse case-insensitive comparer:
// red : strawberries
// YELLOW : LIMES
// GREEN : PEARS
// BLUE : BERRIES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting the entire Array using the default comparer:
// black : olives
// BLUE : BERRIES
// GREEN : PEARS
// orange : cantaloupe
// purple : grapes
// red : strawberries
// YELLOW : LIMES
//
// After sorting the entire Array using the reverse case-insensitive comparer:
// YELLOW : LIMES
// red : strawberries
// purple : grapes
// orange : cantaloupe
// GREEN : PEARS
// BLUE : BERRIES
// black : olives
Imports System.Collections
Public Class SamplesArray
Public Class myReverserClass
Implements IComparer
' Calls CaseInsensitiveComparer.Compare with the parameters reversed.
Function Compare(x As [Object], y As [Object]) As Integer _
Implements IComparer.Compare
Return New CaseInsensitiveComparer().Compare(y, x)
End Function 'IComparer.Compare
End Class
Public Shared Sub Main()
' Creates and initializes a new Array and a new custom comparer.
Dim myKeys As [String]() = {"red", "GREEN", "YELLOW", "BLUE", "purple", "black", "orange"}
Dim myValues As [String]() = {"strawberries", "PEARS", "LIMES", "BERRIES", "grapes", "olives", "cantaloupe"}
Dim myComparer = New myReverserClass()
' Displays the values of the Array.
Console.WriteLine("The Array initially contains the following values:")
PrintKeysAndValues(myKeys, myValues)
' Sorts a section of the Array using the default comparer.
Array.Sort(myKeys, myValues, 1, 3)
Console.WriteLine("After sorting a section of the Array using the default comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, 1, 3, myComparer)
Console.WriteLine("After sorting a section of the Array using the reverse case-insensitive comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts the entire Array using the default comparer.
Array.Sort(myKeys, myValues)
Console.WriteLine("After sorting the entire Array using the default comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, myComparer)
Console.WriteLine("After sorting the entire Array using the reverse case-insensitive comparer:")
PrintKeysAndValues(myKeys, myValues)
End Sub
Public Shared Sub PrintKeysAndValues(myKeys() As [String], myValues() As [String])
Dim i As Integer
For i = 0 To myKeys.Length - 1
Console.WriteLine(" {0,-10}: {1}", myKeys(i), myValues(i))
Next i
Console.WriteLine()
End Sub
End Class
'This code produces the following output.
'
'The Array initially contains the following values:
' red : strawberries
' GREEN : PEARS
' YELLOW : LIMES
' BLUE : BERRIES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting a section of the Array using the default comparer:
' red : strawberries
' BLUE : BERRIES
' GREEN : PEARS
' YELLOW : LIMES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting a section of the Array using the reverse case-insensitive comparer:
' red : strawberries
' YELLOW : LIMES
' GREEN : PEARS
' BLUE : BERRIES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting the entire Array using the default comparer:
' black : olives
' BLUE : BERRIES
' GREEN : PEARS
' orange : cantaloupe
' purple : grapes
' red : strawberries
' YELLOW : LIMES
'
'After sorting the entire Array using the reverse case-insensitive comparer:
' YELLOW : LIMES
' red : strawberries
' purple : grapes
' orange : cantaloupe
' GREEN : PEARS
' BLUE : BERRIES
' black : olives
Hinweise
Jeder Schlüssel im keys
Array verfügt über ein entsprechendes Element im items
Array. Wenn ein Schlüssel während der Sortierung neu positioniert wird, wird das entsprechende Element im items
Array auf ähnliche Weise neu positioniert. Daher wird der items
Array nach der Anordnung der entsprechenden Schlüssel im keys
Arraysortiert.
Wenn comparer
ist null
, muss jeder Schlüssel im keys
Array die IComparable -Schnittstelle implementieren, um Vergleiche mit jedem anderen Schlüssel durchführen zu können.
Sie können sortieren, wenn mehr Elemente als Schlüssel vorhanden sind, aber die Elemente, die keine entsprechenden Schlüssel haben, werden nicht sortiert. Sie können nicht sortieren, wenn mehr Schlüssel als Elemente vorhanden sind. Dadurch wird ein ArgumentExceptionausgelöst.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
.NET enthält vordefinierte IComparer Implementierungen, die in der folgenden Tabelle aufgeführt sind.
Implementierung | Beschreibung |
---|---|
System.Collections.CaseInsensitiveComparer | Vergleicht zwei beliebige Objekte, führt jedoch einen Vergleich von Zeichenfolgen ohne Berücksichtigung der Groß-/Kleinschreibung durch. |
Comparer.Default | Vergleicht zwei beliebige Objekte mithilfe der Sortierkonventionen der aktuellen Kultur. |
Comparer.DefaultInvariant | Vergleicht zwei beliebige Objekte mithilfe der Sortierkonventionen der invarianten Kultur. |
Comparer<T>.Default | Vergleicht zwei Objekte des Typs T mithilfe der Standardsortierreihenfolge des Typs. |
Sie können auch benutzerdefinierte Vergleiche unterstützen, indem Sie dem Parameter eine instance Ihrer eigenen IComparer Implementierung comparer
bereitstellen. Im Beispiel wird dazu eine IComparer Implementierung definiert, die die Standardsortierreihenfolge umkehrt und einen Zeichenfolgenvergleich ohne Berücksichtigung der Groß-/Kleinschreibung durchführt.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner als oder gleich 16 Elementen ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der elemente bei, die gleich sind.
Diese Methode ist ein O(n
log n
) -Vorgang, wobei n
der Length von keys
ist.
Hinweise für Aufrufer
.NET Framework 4 und früheren Versionen wurden nur der Quicksort-Algorithmus verwendet. Quicksort identifiziert ungültige Vergleiche in einigen Situationen, in denen der Sortiervorgang eine IndexOutOfRangeException Ausnahme auslöst, und löst eine ArgumentException Ausnahme für den Aufrufer aus. Ab .NET Framework 4.5 ist es möglich, dass sortiervorgänge, die zuvor ausgelöst ArgumentException wurden, keine Ausnahme auslösen, da die Einfügungssortierungs- und Heapsortalgorithmen keinen ungültigen Vergleich erkennen. Dies gilt in den meisten Fällen für Arrays mit weniger als oder gleich 16 Elementen.
Weitere Informationen
- IComparer
- IComparable
- BinarySearch
- Durchführen kulturunabhängiger Zeichenfolgenoperationen in Arrays
Gilt für:
Sort(Array, Array)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert ein Paar eindimensionaler Array-Objekte (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die IComparable-Implementierung der einzelnen Schlüssel.
public:
static void Sort(Array ^ keys, Array ^ items);
public static void Sort (Array keys, Array items);
public static void Sort (Array keys, Array? items);
static member Sort : Array * Array -> unit
Public Shared Sub Sort (keys As Array, items As Array)
Parameter
- items
- Array
Das eindimensionale Array mit den Elementen, die den jeweiligen Schlüsseln im keys
Array entsprechen.
- oder -
null
, wenn nur das keys
Array sortiert werden soll.
Ausnahmen
keys
ist null
.
items
ist nicht null
, und die Länge von keys
ist größer als die Länge von items
.
In einem oder mehreren Elementen in keys
Array ist die IComparable-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Beispiel wird gezeigt, wie zwei zugeordnete Arrays sortiert werden, wobei das erste Array die Schlüssel und das zweite Array die Werte enthält. Die Sortierung erfolgt mithilfe des Standardvergleichs und eines benutzerdefinierten Vergleichs, der die Sortierreihenfolge umkehrt. Beachten Sie, dass das Ergebnis je nach aktuellem CultureInfovariieren kann.
using namespace System;
using namespace System::Collections;
public ref class myReverserClass: public IComparer
{
private:
// Calls CaseInsensitiveComparer::Compare with the parameters reversed.
virtual int Compare( Object^ x, Object^ y ) = IComparer::Compare
{
return ((gcnew CaseInsensitiveComparer)->Compare( y, x ));
}
};
void PrintKeysAndValues( array<String^>^myKeys, array<String^>^myValues )
{
for ( int i = 0; i < myKeys->Length; i++ )
{
Console::WriteLine( " {0, -10}: {1}", myKeys[ i ], myValues[ i ] );
}
Console::WriteLine();
}
int main()
{
// Creates and initializes a new Array and a new custom comparer.
array<String^>^myKeys = {"red","GREEN","YELLOW","BLUE","purple","black","orange"};
array<String^>^myValues = {"strawberries","PEARS","LIMES","BERRIES","grapes","olives","cantaloupe"};
IComparer^ myComparer = gcnew myReverserClass;
// Displays the values of the Array.
Console::WriteLine( "The Array initially contains the following values:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the default comparer.
Array::Sort( myKeys, myValues, 1, 3 );
Console::WriteLine( "After sorting a section of the Array using the default comparer:" );
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array::Sort( myKeys, myValues, 1, 3, myComparer );
Console::WriteLine( "After sorting a section of the Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the default comparer.
Array::Sort( myKeys, myValues );
Console::WriteLine( "After sorting the entire Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the reverse case-insensitive comparer.
Array::Sort( myKeys, myValues, myComparer );
Console::WriteLine( "After sorting the entire Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
}
/*
This code produces the following output.
The Array initially contains the following values:
red : strawberries
GREEN : PEARS
YELLOW : LIMES
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the default comparer:
red : strawberries
BLUE : BERRIES
GREEN : PEARS
YELLOW : LIMES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the reverse case-insensitive comparer:
red : strawberries
YELLOW : LIMES
GREEN : PEARS
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting the entire Array using the default comparer:
black : olives
BLUE : BERRIES
GREEN : PEARS
orange : cantaloupe
purple : grapes
red : strawberries
YELLOW : LIMES
After sorting the entire Array using the reverse case-insensitive comparer:
YELLOW : LIMES
red : strawberries
purple : grapes
orange : cantaloupe
GREEN : PEARS
BLUE : BERRIES
black : olives
*/
using System;
using System.Collections;
public class SamplesArray {
public class myReverserClass : IComparer {
// Calls CaseInsensitiveComparer.Compare with the parameters reversed.
int IComparer.Compare( Object x, Object y ) {
return( (new CaseInsensitiveComparer()).Compare( y, x ) );
}
}
public static void Main() {
// Creates and initializes a new Array and a new custom comparer.
String[] myKeys = { "red", "GREEN", "YELLOW", "BLUE", "purple", "black", "orange" };
String[] myValues = { "strawberries", "PEARS", "LIMES", "BERRIES", "grapes", "olives", "cantaloupe" };
IComparer myComparer = new myReverserClass();
// Displays the values of the Array.
Console.WriteLine( "The Array initially contains the following values:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the default comparer.
Array.Sort( myKeys, myValues, 1, 3 );
Console.WriteLine( "After sorting a section of the Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort( myKeys, myValues, 1, 3, myComparer );
Console.WriteLine( "After sorting a section of the Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the default comparer.
Array.Sort( myKeys, myValues );
Console.WriteLine( "After sorting the entire Array using the default comparer:" );
PrintKeysAndValues( myKeys, myValues );
// Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort( myKeys, myValues, myComparer );
Console.WriteLine( "After sorting the entire Array using the reverse case-insensitive comparer:" );
PrintKeysAndValues( myKeys, myValues );
}
public static void PrintKeysAndValues( String[] myKeys, String[] myValues ) {
for ( int i = 0; i < myKeys.Length; i++ ) {
Console.WriteLine( " {0,-10}: {1}", myKeys[i], myValues[i] );
}
Console.WriteLine();
}
}
/*
This code produces the following output.
The Array initially contains the following values:
red : strawberries
GREEN : PEARS
YELLOW : LIMES
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the default comparer:
red : strawberries
BLUE : BERRIES
GREEN : PEARS
YELLOW : LIMES
purple : grapes
black : olives
orange : cantaloupe
After sorting a section of the Array using the reverse case-insensitive comparer:
red : strawberries
YELLOW : LIMES
GREEN : PEARS
BLUE : BERRIES
purple : grapes
black : olives
orange : cantaloupe
After sorting the entire Array using the default comparer:
black : olives
BLUE : BERRIES
GREEN : PEARS
orange : cantaloupe
purple : grapes
red : strawberries
YELLOW : LIMES
After sorting the entire Array using the reverse case-insensitive comparer:
YELLOW : LIMES
red : strawberries
purple : grapes
orange : cantaloupe
GREEN : PEARS
BLUE : BERRIES
black : olives
*/
open System
open System.Collections
type MyReverserClass() =
interface IComparer with
member _.Compare(x, y) =
// Calls CaseInsensitiveComparer.Compare with the parameters reversed.
CaseInsensitiveComparer().Compare(y, x)
let printKeysAndValues (myKeys: string []) (myValues: string []) =
for i = 0 to myKeys.Length - 1 do
printfn $" {myKeys[i],-10}: {myValues[i]}"
printfn ""
// Creates and initializes a new Array and a new custom comparer.
let myKeys = [| "red"; "GREEN"; "YELLOW"; "BLUE"; "purple"; "black"; "orange" |]
let myValues = [| "strawberries"; "PEARS"; "LIMES"; "BERRIES"; "grapes"; "olives"; "cantaloupe" |]
let myComparer = MyReverserClass()
// Displays the values of the Array.
printfn "The Array initially contains the following values:"
printKeysAndValues myKeys myValues
// Sorts a section of the Array using the default comparer.
Array.Sort(myKeys, myValues, 1, 3)
printfn "After sorting a section of the Array using the default comparer:"
printKeysAndValues myKeys myValues
// Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, 1, 3, myComparer)
printfn "After sorting a section of the Array using the reverse case-insensitive comparer:"
printKeysAndValues myKeys myValues
// Sorts the entire Array using the default comparer.
Array.Sort(myKeys, myValues)
printfn "After sorting the entire Array using the default comparer:"
printKeysAndValues myKeys myValues
// Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, myComparer)
printfn "After sorting the entire Array using the reverse case-insensitive comparer:"
printKeysAndValues myKeys myValues
// This code produces the following output.
// The Array initially contains the following values:
// red : strawberries
// GREEN : PEARS
// YELLOW : LIMES
// BLUE : BERRIES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting a section of the Array using the default comparer:
// red : strawberries
// BLUE : BERRIES
// GREEN : PEARS
// YELLOW : LIMES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting a section of the Array using the reverse case-insensitive comparer:
// red : strawberries
// YELLOW : LIMES
// GREEN : PEARS
// BLUE : BERRIES
// purple : grapes
// black : olives
// orange : cantaloupe
//
// After sorting the entire Array using the default comparer:
// black : olives
// BLUE : BERRIES
// GREEN : PEARS
// orange : cantaloupe
// purple : grapes
// red : strawberries
// YELLOW : LIMES
//
// After sorting the entire Array using the reverse case-insensitive comparer:
// YELLOW : LIMES
// red : strawberries
// purple : grapes
// orange : cantaloupe
// GREEN : PEARS
// BLUE : BERRIES
// black : olives
Imports System.Collections
Public Class SamplesArray
Public Class myReverserClass
Implements IComparer
' Calls CaseInsensitiveComparer.Compare with the parameters reversed.
Function Compare(x As [Object], y As [Object]) As Integer _
Implements IComparer.Compare
Return New CaseInsensitiveComparer().Compare(y, x)
End Function 'IComparer.Compare
End Class
Public Shared Sub Main()
' Creates and initializes a new Array and a new custom comparer.
Dim myKeys As [String]() = {"red", "GREEN", "YELLOW", "BLUE", "purple", "black", "orange"}
Dim myValues As [String]() = {"strawberries", "PEARS", "LIMES", "BERRIES", "grapes", "olives", "cantaloupe"}
Dim myComparer = New myReverserClass()
' Displays the values of the Array.
Console.WriteLine("The Array initially contains the following values:")
PrintKeysAndValues(myKeys, myValues)
' Sorts a section of the Array using the default comparer.
Array.Sort(myKeys, myValues, 1, 3)
Console.WriteLine("After sorting a section of the Array using the default comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts a section of the Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, 1, 3, myComparer)
Console.WriteLine("After sorting a section of the Array using the reverse case-insensitive comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts the entire Array using the default comparer.
Array.Sort(myKeys, myValues)
Console.WriteLine("After sorting the entire Array using the default comparer:")
PrintKeysAndValues(myKeys, myValues)
' Sorts the entire Array using the reverse case-insensitive comparer.
Array.Sort(myKeys, myValues, myComparer)
Console.WriteLine("After sorting the entire Array using the reverse case-insensitive comparer:")
PrintKeysAndValues(myKeys, myValues)
End Sub
Public Shared Sub PrintKeysAndValues(myKeys() As [String], myValues() As [String])
Dim i As Integer
For i = 0 To myKeys.Length - 1
Console.WriteLine(" {0,-10}: {1}", myKeys(i), myValues(i))
Next i
Console.WriteLine()
End Sub
End Class
'This code produces the following output.
'
'The Array initially contains the following values:
' red : strawberries
' GREEN : PEARS
' YELLOW : LIMES
' BLUE : BERRIES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting a section of the Array using the default comparer:
' red : strawberries
' BLUE : BERRIES
' GREEN : PEARS
' YELLOW : LIMES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting a section of the Array using the reverse case-insensitive comparer:
' red : strawberries
' YELLOW : LIMES
' GREEN : PEARS
' BLUE : BERRIES
' purple : grapes
' black : olives
' orange : cantaloupe
'
'After sorting the entire Array using the default comparer:
' black : olives
' BLUE : BERRIES
' GREEN : PEARS
' orange : cantaloupe
' purple : grapes
' red : strawberries
' YELLOW : LIMES
'
'After sorting the entire Array using the reverse case-insensitive comparer:
' YELLOW : LIMES
' red : strawberries
' purple : grapes
' orange : cantaloupe
' GREEN : PEARS
' BLUE : BERRIES
' black : olives
Hinweise
Jeder Schlüssel im keys
Array verfügt über ein entsprechendes Element im items
Array. Wenn ein Schlüssel während der Sortierung neu positioniert wird, wird das entsprechende Element im items
Array auf ähnliche Weise neu positioniert. Daher wird der items
Array nach der Anordnung der entsprechenden Schlüssel im keys
Arraysortiert.
Jeder Schlüssel im keys
Array muss die IComparable -Schnittstelle implementieren, um Vergleiche mit jedem anderen Schlüssel durchführen zu können.
Sie können sortieren, wenn mehr Elemente als Schlüssel vorhanden sind, aber die Elemente, die keine entsprechenden Schlüssel haben, werden nicht sortiert. Sie können nicht sortieren, wenn mehr Schlüssel als Elemente vorhanden sind. Dadurch wird ein ArgumentExceptionausgelöst.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner als oder gleich 16 Elementen ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der elemente bei, die gleich sind.
Diese Methode ist ein O(n
log n
) -Vorgang, wobei n
der Length von keys
ist.
Weitere Informationen
- IComparable
- BinarySearch
- IDictionary
- Durchführen kulturunabhängiger Zeichenfolgenoperationen in Arrays
Gilt für:
Sort(Array)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert die Elemente in einem ganzen eindimensionalen Array mithilfe der IComparable-Implementierung jedes Elements des Array.
public:
static void Sort(Array ^ array);
public static void Sort (Array array);
static member Sort : Array -> unit
Public Shared Sub Sort (array As Array)
Parameter
Ausnahmen
array
ist null
.
array
ist mehrdimensional.
In einem oder mehreren Elementen in array
ist die IComparable-Schnittstelle nicht implementiert.
Beispiele
Das folgende Codebeispiel zeigt, wie die Werte in einem Array mithilfe des Standardvergleichs und eines benutzerdefinierten Vergleichs sortiert werden, der die Sortierreihenfolge umkehrt. Beachten Sie, dass das Ergebnis je nach aktuellem CultureInfovariieren kann.
using namespace System;
using namespace System::Collections;
public ref class ReverseComparer : IComparer
{
public:
// Call CaseInsensitiveComparer::Compare with the parameters reversed.
virtual int Compare(Object^ x, Object^ y) = IComparer::Compare
{
return ((gcnew CaseInsensitiveComparer)->Compare(y, x));
}
};
void DisplayValues(array<String^>^ arr)
{
for (int i = arr->GetLowerBound(0); i <= arr->GetUpperBound(0); i++)
Console::WriteLine( " [{0}] : {1}", i, arr[ i ] );
Console::WriteLine();
}
int main()
{
// Create and initialize a new array. and a new custom comparer.
array<String^>^ words = { "The","QUICK","BROWN","FOX","jumps",
"over","the","lazy","dog" };
// Instantiate the reverse comparer.
IComparer^ revComparer = gcnew ReverseComparer();
// Display the values of the Array.
Console::WriteLine( "The original order of elements in the array:" );
DisplayValues(words);
// Sort a section of the array using the default comparer.
Array::Sort(words, 1, 3);
Console::WriteLine( "After sorting elements 1-3 by using the default comparer:");
DisplayValues(words);
// Sort a section of the array using the reverse case-insensitive comparer.
Array::Sort(words, 1, 3, revComparer);
Console::WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:");
DisplayValues(words);
// Sort the entire array using the default comparer.
Array::Sort(words);
Console::WriteLine( "After sorting the entire array by using the default comparer:");
DisplayValues(words);
// Sort the entire array by using the reverse case-insensitive comparer.
Array::Sort(words, revComparer);
Console::WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:");
DisplayValues(words);
}
/*
This code produces the following output.
The Array initially contains the following values:
[0] : The
[1] : QUICK
[2] : BROWN
[3] : FOX
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting a section of the Array using the default comparer:
[0] : The
[1] : BROWN
[2] : FOX
[3] : QUICK
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting a section of the Array using the reverse case-insensitive comparer:
[0] : The
[1] : QUICK
[2] : FOX
[3] : BROWN
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting the entire Array using the default comparer:
[0] : BROWN
[1] : dog
[2] : FOX
[3] : jumps
[4] : lazy
[5] : over
[6] : QUICK
[7] : the
[8] : The
After sorting the entire Array using the reverse case-insensitive comparer:
[0] : the
[1] : The
[2] : QUICK
[3] : over
[4] : lazy
[5] : jumps
[6] : FOX
[7] : dog
[8] : BROWN
*/
using System;
using System.Collections;
public class ReverseComparer : IComparer
{
// Call CaseInsensitiveComparer.Compare with the parameters reversed.
public int Compare(Object x, Object y)
{
return (new CaseInsensitiveComparer()).Compare(y, x );
}
}
public class Example
{
public static void Main()
{
// Create and initialize a new array.
String[] words = { "The", "QUICK", "BROWN", "FOX", "jumps",
"over", "the", "lazy", "dog" };
// Instantiate the reverse comparer.
IComparer revComparer = new ReverseComparer();
// Display the values of the array.
Console.WriteLine( "The original order of elements in the array:" );
DisplayValues(words);
// Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3);
Console.WriteLine( "After sorting elements 1-3 by using the default comparer:");
DisplayValues(words);
// Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer);
Console.WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:");
DisplayValues(words);
// Sort the entire array using the default comparer.
Array.Sort(words);
Console.WriteLine( "After sorting the entire array by using the default comparer:");
DisplayValues(words);
// Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer);
Console.WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:");
DisplayValues(words);
}
public static void DisplayValues(String[] arr)
{
for ( int i = arr.GetLowerBound(0); i <= arr.GetUpperBound(0);
i++ ) {
Console.WriteLine( " [{0}] : {1}", i, arr[i] );
}
Console.WriteLine();
}
}
// The example displays the following output:
// The original order of elements in the array:
// [0] : The
// [1] : QUICK
// [2] : BROWN
// [3] : FOX
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the default comparer:
// [0] : The
// [1] : BROWN
// [2] : FOX
// [3] : QUICK
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the reverse case-insensitive comparer:
// [0] : The
// [1] : QUICK
// [2] : FOX
// [3] : BROWN
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting the entire array by using the default comparer:
// [0] : BROWN
// [1] : dog
// [2] : FOX
// [3] : jumps
// [4] : lazy
// [5] : over
// [6] : QUICK
// [7] : the
// [8] : The
//
// After sorting the entire array using the reverse case-insensitive comparer:
// [0] : the
// [1] : The
// [2] : QUICK
// [3] : over
// [4] : lazy
// [5] : jumps
// [6] : FOX
// [7] : dog
// [8] : BROWN
open System
open System.Collections
type ReverseComparer() =
interface IComparer with
member _.Compare(x, y) =
// Call CaseInsensitiveComparer.Compare with the parameters reversed.
CaseInsensitiveComparer().Compare(y, x)
let displayValues (arr: string []) =
for i = 0 to arr.Length - 1 do
printfn $" [{i}] : {arr[i]}"
printfn ""
// Create and initialize a new array.
let words =
[| "The"; "QUICK"; "BROWN"; "FOX"; "jumps"
"over"; "the"; "lazy"; "dog" |]
// Instantiate the reverse comparer.
let revComparer = ReverseComparer()
// Display the values of the array.
printfn "The original order of elements in the array:"
displayValues words
// Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3)
printfn "After sorting elements 1-3 by using the default comparer:"
displayValues words
// Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer)
printfn "After sorting elements 1-3 by using the reverse case-insensitive comparer:"
displayValues words
// Sort the entire array using the default comparer.
Array.Sort words
printfn "After sorting the entire array by using the default comparer:"
displayValues words
// Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer)
printfn "After sorting the entire array using the reverse case-insensitive comparer:"
displayValues words
// The example displays the following output:
// The original order of elements in the array:
// [0] : The
// [1] : QUICK
// [2] : BROWN
// [3] : FOX
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the default comparer:
// [0] : The
// [1] : BROWN
// [2] : FOX
// [3] : QUICK
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the reverse case-insensitive comparer:
// [0] : The
// [1] : QUICK
// [2] : FOX
// [3] : BROWN
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting the entire array by using the default comparer:
// [0] : BROWN
// [1] : dog
// [2] : FOX
// [3] : jumps
// [4] : lazy
// [5] : over
// [6] : QUICK
// [7] : the
// [8] : The
//
// After sorting the entire array using the reverse case-insensitive comparer:
// [0] : the
// [1] : The
// [2] : QUICK
// [3] : over
// [4] : lazy
// [5] : jumps
// [6] : FOX
// [7] : dog
// [8] : BROWN
Imports System.Collections
Public Class ReverseComparer : Implements IComparer
' Call CaseInsensitiveComparer.Compare with the parameters reversed.
Function Compare(x As Object, y As Object) As Integer _
Implements IComparer.Compare
Return New CaseInsensitiveComparer().Compare(y, x)
End Function
End Class
Public Module Example
Public Sub Main()
' Create and initialize a new array.
Dim words() As String = { "The", "QUICK", "BROWN", "FOX", "jumps",
"over", "the", "lazy", "dog" }
' Instantiate a new custom comparer.
Dim revComparer As New ReverseComparer()
' Display the values of the array.
Console.WriteLine( "The original order of elements in the array:" )
DisplayValues(words)
' Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3)
Console.WriteLine( "After sorting elements 1-3 by using the default comparer:")
DisplayValues(words)
' Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer)
Console.WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:")
DisplayValues(words)
' Sort the entire array using the default comparer.
Array.Sort(words)
Console.WriteLine( "After sorting the entire array by using the default comparer:")
DisplayValues(words)
' Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer)
Console.WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:")
DisplayValues(words)
End Sub
Public Sub DisplayValues(arr() As String)
For i As Integer = arr.GetLowerBound(0) To arr.GetUpperBound(0)
Console.WriteLine(" [{0}] : {1}", i, arr(i))
Next
Console.WriteLine()
End Sub
End Module
' The example displays the following output:
' The original order of elements in the array:
' [0] : The
' [1] : QUICK
' [2] : BROWN
' [3] : FOX
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting elements 1-3 by using the default comparer:
' [0] : The
' [1] : BROWN
' [2] : FOX
' [3] : QUICK
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting elements 1-3 by using the reverse case-insensitive comparer:
' [0] : The
' [1] : QUICK
' [2] : FOX
' [3] : BROWN
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting the entire array by using the default comparer:
' [0] : BROWN
' [1] : dog
' [2] : FOX
' [3] : jumps
' [4] : lazy
' [5] : over
' [6] : QUICK
' [7] : the
' [8] : The
'
' After sorting the entire array using the reverse case-insensitive comparer:
' [0] : the
' [1] : The
' [2] : QUICK
' [3] : over
' [4] : lazy
' [5] : jumps
' [6] : FOX
' [7] : dog
' [8] : BROWN
Hinweise
Jedes Element von array
muss die IComparable -Schnittstelle implementieren, damit Vergleiche mit jedem anderen Element in möglich array
sind.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner als oder gleich 16 Elementen ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der elemente bei, die gleich sind.
Diese Methode ist ein O(n
log n
) -Vorgang, wobei n
der Length von array
ist.
Weitere Informationen
Gilt für:
Sort(Array, IComparer)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
public:
static void Sort(Array ^ array, System::Collections::IComparer ^ comparer);
public static void Sort (Array array, System.Collections.IComparer comparer);
public static void Sort (Array array, System.Collections.IComparer? comparer);
static member Sort : Array * System.Collections.IComparer -> unit
Public Shared Sub Sort (array As Array, comparer As IComparer)
Parameter
- array
- Array
Das zu sortierende eindimensionale Array.
- comparer
- IComparer
Die Implementierung, die beim Vergleich von Elementen verwendet werden soll.
- oder -
null
, wenn die IComparable-Implementierung des jeweiligen Elements verwendet werden soll.
Ausnahmen
array
ist null
.
array
ist mehrdimensional.
comparer
ist null
, und in einem oder mehreren Elementen in array
ist die IComparable-Schnittstelle nicht implementiert.
Die Implementierung von comparer
hat einen Fehler während der Sortierung verursacht. Beispielsweise gibt comparer
beim Vergleichen eines Elements mit sich selbst möglicherweise nicht 0 zurück.
Beispiele
Im folgenden Beispiel werden die Werte in einem Zeichenfolgenarray mithilfe des Standardvergleichs sortiert. Außerdem wird eine benutzerdefinierte IComparer Implementierung namens ReverseComparer
definiert, die die Standardsortierreihenfolge eines Objekts umkehrt, während ein Zeichenfolgenvergleich ohne Berücksichtigung der Groß-/Kleinschreibung durchgeführt wird. Beachten Sie, dass die Ausgabe je nach aktueller Kultur variieren kann.
using namespace System;
using namespace System::Collections;
public ref class ReverseComparer : IComparer
{
public:
// Call CaseInsensitiveComparer::Compare with the parameters reversed.
virtual int Compare(Object^ x, Object^ y) = IComparer::Compare
{
return ((gcnew CaseInsensitiveComparer)->Compare(y, x));
}
};
void DisplayValues(array<String^>^ arr)
{
for (int i = arr->GetLowerBound(0); i <= arr->GetUpperBound(0); i++)
Console::WriteLine( " [{0}] : {1}", i, arr[ i ] );
Console::WriteLine();
}
int main()
{
// Create and initialize a new array. and a new custom comparer.
array<String^>^ words = { "The","QUICK","BROWN","FOX","jumps",
"over","the","lazy","dog" };
// Instantiate the reverse comparer.
IComparer^ revComparer = gcnew ReverseComparer();
// Display the values of the Array.
Console::WriteLine( "The original order of elements in the array:" );
DisplayValues(words);
// Sort a section of the array using the default comparer.
Array::Sort(words, 1, 3);
Console::WriteLine( "After sorting elements 1-3 by using the default comparer:");
DisplayValues(words);
// Sort a section of the array using the reverse case-insensitive comparer.
Array::Sort(words, 1, 3, revComparer);
Console::WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:");
DisplayValues(words);
// Sort the entire array using the default comparer.
Array::Sort(words);
Console::WriteLine( "After sorting the entire array by using the default comparer:");
DisplayValues(words);
// Sort the entire array by using the reverse case-insensitive comparer.
Array::Sort(words, revComparer);
Console::WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:");
DisplayValues(words);
}
/*
This code produces the following output.
The Array initially contains the following values:
[0] : The
[1] : QUICK
[2] : BROWN
[3] : FOX
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting a section of the Array using the default comparer:
[0] : The
[1] : BROWN
[2] : FOX
[3] : QUICK
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting a section of the Array using the reverse case-insensitive comparer:
[0] : The
[1] : QUICK
[2] : FOX
[3] : BROWN
[4] : jumps
[5] : over
[6] : the
[7] : lazy
[8] : dog
After sorting the entire Array using the default comparer:
[0] : BROWN
[1] : dog
[2] : FOX
[3] : jumps
[4] : lazy
[5] : over
[6] : QUICK
[7] : the
[8] : The
After sorting the entire Array using the reverse case-insensitive comparer:
[0] : the
[1] : The
[2] : QUICK
[3] : over
[4] : lazy
[5] : jumps
[6] : FOX
[7] : dog
[8] : BROWN
*/
using System;
using System.Collections;
public class ReverseComparer : IComparer
{
// Call CaseInsensitiveComparer.Compare with the parameters reversed.
public int Compare(Object x, Object y)
{
return (new CaseInsensitiveComparer()).Compare(y, x );
}
}
public class Example
{
public static void Main()
{
// Create and initialize a new array.
String[] words = { "The", "QUICK", "BROWN", "FOX", "jumps",
"over", "the", "lazy", "dog" };
// Instantiate the reverse comparer.
IComparer revComparer = new ReverseComparer();
// Display the values of the array.
Console.WriteLine( "The original order of elements in the array:" );
DisplayValues(words);
// Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3);
Console.WriteLine( "After sorting elements 1-3 by using the default comparer:");
DisplayValues(words);
// Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer);
Console.WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:");
DisplayValues(words);
// Sort the entire array using the default comparer.
Array.Sort(words);
Console.WriteLine( "After sorting the entire array by using the default comparer:");
DisplayValues(words);
// Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer);
Console.WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:");
DisplayValues(words);
}
public static void DisplayValues(String[] arr)
{
for ( int i = arr.GetLowerBound(0); i <= arr.GetUpperBound(0);
i++ ) {
Console.WriteLine( " [{0}] : {1}", i, arr[i] );
}
Console.WriteLine();
}
}
// The example displays the following output:
// The original order of elements in the array:
// [0] : The
// [1] : QUICK
// [2] : BROWN
// [3] : FOX
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the default comparer:
// [0] : The
// [1] : BROWN
// [2] : FOX
// [3] : QUICK
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the reverse case-insensitive comparer:
// [0] : The
// [1] : QUICK
// [2] : FOX
// [3] : BROWN
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting the entire array by using the default comparer:
// [0] : BROWN
// [1] : dog
// [2] : FOX
// [3] : jumps
// [4] : lazy
// [5] : over
// [6] : QUICK
// [7] : the
// [8] : The
//
// After sorting the entire array using the reverse case-insensitive comparer:
// [0] : the
// [1] : The
// [2] : QUICK
// [3] : over
// [4] : lazy
// [5] : jumps
// [6] : FOX
// [7] : dog
// [8] : BROWN
open System
open System.Collections
type ReverseComparer() =
interface IComparer with
member _.Compare(x, y) =
// Call CaseInsensitiveComparer.Compare with the parameters reversed.
CaseInsensitiveComparer().Compare(y, x)
let displayValues (arr: string []) =
for i = 0 to arr.Length - 1 do
printfn $" [{i}] : {arr[i]}"
printfn ""
// Create and initialize a new array.
let words =
[| "The"; "QUICK"; "BROWN"; "FOX"; "jumps"
"over"; "the"; "lazy"; "dog" |]
// Instantiate the reverse comparer.
let revComparer = ReverseComparer()
// Display the values of the array.
printfn "The original order of elements in the array:"
displayValues words
// Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3)
printfn "After sorting elements 1-3 by using the default comparer:"
displayValues words
// Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer)
printfn "After sorting elements 1-3 by using the reverse case-insensitive comparer:"
displayValues words
// Sort the entire array using the default comparer.
Array.Sort words
printfn "After sorting the entire array by using the default comparer:"
displayValues words
// Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer)
printfn "After sorting the entire array using the reverse case-insensitive comparer:"
displayValues words
// The example displays the following output:
// The original order of elements in the array:
// [0] : The
// [1] : QUICK
// [2] : BROWN
// [3] : FOX
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the default comparer:
// [0] : The
// [1] : BROWN
// [2] : FOX
// [3] : QUICK
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting elements 1-3 by using the reverse case-insensitive comparer:
// [0] : The
// [1] : QUICK
// [2] : FOX
// [3] : BROWN
// [4] : jumps
// [5] : over
// [6] : the
// [7] : lazy
// [8] : dog
//
// After sorting the entire array by using the default comparer:
// [0] : BROWN
// [1] : dog
// [2] : FOX
// [3] : jumps
// [4] : lazy
// [5] : over
// [6] : QUICK
// [7] : the
// [8] : The
//
// After sorting the entire array using the reverse case-insensitive comparer:
// [0] : the
// [1] : The
// [2] : QUICK
// [3] : over
// [4] : lazy
// [5] : jumps
// [6] : FOX
// [7] : dog
// [8] : BROWN
Imports System.Collections
Public Class ReverseComparer : Implements IComparer
' Call CaseInsensitiveComparer.Compare with the parameters reversed.
Function Compare(x As Object, y As Object) As Integer _
Implements IComparer.Compare
Return New CaseInsensitiveComparer().Compare(y, x)
End Function
End Class
Public Module Example
Public Sub Main()
' Create and initialize a new array.
Dim words() As String = { "The", "QUICK", "BROWN", "FOX", "jumps",
"over", "the", "lazy", "dog" }
' Instantiate a new custom comparer.
Dim revComparer As New ReverseComparer()
' Display the values of the array.
Console.WriteLine( "The original order of elements in the array:" )
DisplayValues(words)
' Sort a section of the array using the default comparer.
Array.Sort(words, 1, 3)
Console.WriteLine( "After sorting elements 1-3 by using the default comparer:")
DisplayValues(words)
' Sort a section of the array using the reverse case-insensitive comparer.
Array.Sort(words, 1, 3, revComparer)
Console.WriteLine( "After sorting elements 1-3 by using the reverse case-insensitive comparer:")
DisplayValues(words)
' Sort the entire array using the default comparer.
Array.Sort(words)
Console.WriteLine( "After sorting the entire array by using the default comparer:")
DisplayValues(words)
' Sort the entire array by using the reverse case-insensitive comparer.
Array.Sort(words, revComparer)
Console.WriteLine( "After sorting the entire array using the reverse case-insensitive comparer:")
DisplayValues(words)
End Sub
Public Sub DisplayValues(arr() As String)
For i As Integer = arr.GetLowerBound(0) To arr.GetUpperBound(0)
Console.WriteLine(" [{0}] : {1}", i, arr(i))
Next
Console.WriteLine()
End Sub
End Module
' The example displays the following output:
' The original order of elements in the array:
' [0] : The
' [1] : QUICK
' [2] : BROWN
' [3] : FOX
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting elements 1-3 by using the default comparer:
' [0] : The
' [1] : BROWN
' [2] : FOX
' [3] : QUICK
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting elements 1-3 by using the reverse case-insensitive comparer:
' [0] : The
' [1] : QUICK
' [2] : FOX
' [3] : BROWN
' [4] : jumps
' [5] : over
' [6] : the
' [7] : lazy
' [8] : dog
'
' After sorting the entire array by using the default comparer:
' [0] : BROWN
' [1] : dog
' [2] : FOX
' [3] : jumps
' [4] : lazy
' [5] : over
' [6] : QUICK
' [7] : the
' [8] : The
'
' After sorting the entire array using the reverse case-insensitive comparer:
' [0] : the
' [1] : The
' [2] : QUICK
' [3] : over
' [4] : lazy
' [5] : jumps
' [6] : FOX
' [7] : dog
' [8] : BROWN
Hinweise
Wenn comparer
ist null
, muss jedes Element von array
die IComparable -Schnittstelle implementieren, um Vergleiche mit jedem anderen Element in zu array
erhalten.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner oder gleich 16 Elemente ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der Elemente bei, die gleich sind.
Bei dieser Methode handelt es sich um einen O(n
log n
)-Vorgang, wobei n
der Length von array
ist.
.NET enthält vordefinierte IComparer Implementierungen, die in der folgenden Tabelle aufgeführt sind.
Implementierung | Beschreibung |
---|---|
System.Collections.CaseInsensitiveComparer | Vergleicht zwei beliebige Objekte, führt jedoch einen Vergleich der Groß-/Kleinschreibung von Zeichenfolgen durch. |
Comparer.Default | Vergleicht zwei beliebige Objekte mithilfe der Sortierkonventionen der aktuellen Kultur. |
Comparer.DefaultInvariant | Vergleicht zwei beliebige Objekte mithilfe der Sortierkonventionen der invarianten Kultur. |
Comparer<T>.Default | Vergleicht zwei Objekte vom Typ T mithilfe der Standardsortierreihenfolge des Typs. |
Sie können auch benutzerdefinierte Vergleiche unterstützen, indem Sie eine instance Ihrer eigenen IComparer Implementierung für den comparer
Parameter bereitstellen. Im Beispiel wird dazu eine ReverseComparer
Klasse definiert, die die Standardsortierreihenfolge für Instanzen eines Typs umkehrt und einen Zeichenfolgenvergleich ohne Beachtung der Groß-/Kleinschreibung durchführt.
Hinweise für Aufrufer
.NET Framework 4 und früheren Versionen wurde nur der Quicksort-Algorithmus verwendet. Quicksort identifiziert ungültige Vergleiche in einigen Situationen, in denen der Sortiervorgang eine IndexOutOfRangeException Ausnahme auslöst, und löst eine ArgumentException Ausnahme für den Aufrufer aus. Ab .NET Framework 4.5 ist es möglich, dass sortiervorgänge, die zuvor ausgelöst ArgumentException wurden, keine Ausnahme auslösen, da die Einfügungssortierungs- und Heapsortalgorithmen keinen ungültigen Vergleich erkennen. Dies gilt in den meisten Fällen für Arrays mit weniger als oder gleich 16 Elementen.
Weitere Informationen
- IComparer
- IComparable
- BinarySearch
- Durchführen kulturunabhängiger Zeichenfolgenoperationen in Arrays
Gilt für:
Sort<T>(T[])
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert die Elemente in einem ganzen Array mithilfe der Implementierung der generischen IComparable<T>-Schnittstelle jedes Elements des Array.
public:
generic <typename T>
static void Sort(cli::array <T> ^ array);
public static void Sort<T> (T[] array);
static member Sort : 'T[] -> unit
Public Shared Sub Sort(Of T) (array As T())
Typparameter
- T
Der Typ der Elemente des Arrays.
Parameter
- array
- T[]
Das zu sortierende eindimensionale und nullbasierte Array.
Ausnahmen
array
ist null
.
In einem oder mehreren Elementen in array
ist die generische IComparable<T>-Schnittstelle nicht implementiert.
Beispiele
Das folgende Codebeispiel veranschaulicht die Sort<T>(T[]) generische Methodenüberladung und die BinarySearch<T>(T[], T) generische Methodenüberladung. Ein Array von Zeichenfolgen wird in keiner bestimmten Reihenfolge erstellt.
Das Array wird angezeigt, sortiert und erneut angezeigt.
Hinweis
Die Aufrufe der Sort generischen Methoden und BinarySearch der generischen Methoden unterscheiden sich nicht von Aufrufen ihrer nichtgenerischen Entsprechungen, da Visual Basic, C# und C++ den Typ des generischen Typparameters vom Typ des ersten Arguments ableiten. Wenn Sie die Ildasm.exe (IL Disassembler) verwenden, um die Microsoft Intermediate Language (MSIL) zu untersuchen, können Sie sehen, dass die generischen Methoden aufgerufen werden.
Die BinarySearch<T>(T[], T) generische Methodenüberladung wird dann verwendet, um nach zwei Zeichenfolgen zu suchen, eine, die sich nicht im Array befindet, und eine, die ist. Das Array und der Rückgabewert der BinarySearch -Methode werden an die ShowWhere
generische Methode übergeben, die den Indexwert anzeigt, wenn die Zeichenfolge gefunden wird, und andernfalls die Elemente, zwischen denen die Suchzeichenfolge liegen würde, wenn sie im Array wären. Der Index ist negativ, wenn die Zeichenfolge nicht das Array ist, sodass die ShowWhere
-Methode die bitweise Ergänzung (der ~-Operator in C# und Visual C++, -1 in Visual Basic) verwendet, Xor
um den Index des ersten Elements in der Liste abzurufen, das größer als die Suchzeichenfolge ist.
using namespace System;
using namespace System::Collections::Generic;
generic<typename T> void ShowWhere(array<T>^ arr, int index)
{
if (index<0)
{
// If the index is negative, it represents the bitwise
// complement of the next larger element in the array.
//
index = ~index;
Console::Write("Not found. Sorts between: ");
if (index == 0)
Console::Write("beginning of array and ");
else
Console::Write("{0} and ", arr[index-1]);
if (index == arr->Length)
Console::WriteLine("end of array.");
else
Console::WriteLine("{0}.", arr[index]);
}
else
{
Console::WriteLine("Found at index {0}.", index);
}
};
void main()
{
array<String^>^ dinosaurs = {"Pachycephalosaurus",
"Amargasaurus",
"Tyrannosaurus",
"Mamenchisaurus",
"Deinonychus",
"Edmontosaurus"};
Console::WriteLine();
for each(String^ dinosaur in dinosaurs)
{
Console::WriteLine(dinosaur);
}
Console::WriteLine("\nSort");
Array::Sort(dinosaurs);
Console::WriteLine();
for each(String^ dinosaur in dinosaurs)
{
Console::WriteLine(dinosaur);
}
Console::WriteLine("\nBinarySearch for 'Coelophysis':");
int index = Array::BinarySearch(dinosaurs, "Coelophysis");
ShowWhere(dinosaurs, index);
Console::WriteLine("\nBinarySearch for 'Tyrannosaurus':");
index = Array::BinarySearch(dinosaurs, "Tyrannosaurus");
ShowWhere(dinosaurs, index);
}
/* This code example produces the following output:
Pachycephalosaurus
Amargasaurus
Tyrannosaurus
Mamenchisaurus
Deinonychus
Edmontosaurus
Sort
Amargasaurus
Deinonychus
Edmontosaurus
Mamenchisaurus
Pachycephalosaurus
Tyrannosaurus
BinarySearch for 'Coelophysis':
Not found. Sorts between: Amargasaurus and Deinonychus.
BinarySearch for 'Tyrannosaurus':
Found at index 5.
*/
using System;
using System.Collections.Generic;
public class Example
{
public static void Main()
{
string[] dinosaurs = {"Pachycephalosaurus",
"Amargasaurus",
"Tyrannosaurus",
"Mamenchisaurus",
"Deinonychus",
"Edmontosaurus"};
Console.WriteLine();
foreach( string dinosaur in dinosaurs )
{
Console.WriteLine(dinosaur);
}
Console.WriteLine("\nSort");
Array.Sort(dinosaurs);
Console.WriteLine();
foreach( string dinosaur in dinosaurs )
{
Console.WriteLine(dinosaur);
}
Console.WriteLine("\nBinarySearch for 'Coelophysis':");
int index = Array.BinarySearch(dinosaurs, "Coelophysis");
ShowWhere(dinosaurs, index);
Console.WriteLine("\nBinarySearch for 'Tyrannosaurus':");
index = Array.BinarySearch(dinosaurs, "Tyrannosaurus");
ShowWhere(dinosaurs, index);
}
private static void ShowWhere<T>(T[] array, int index)
{
if (index<0)
{
// If the index is negative, it represents the bitwise
// complement of the next larger element in the array.
//
index = ~index;
Console.Write("Not found. Sorts between: ");
if (index == 0)
Console.Write("beginning of array and ");
else
Console.Write("{0} and ", array[index-1]);
if (index == array.Length)
Console.WriteLine("end of array.");
else
Console.WriteLine("{0}.", array[index]);
}
else
{
Console.WriteLine("Found at index {0}.", index);
}
}
}
/* This code example produces the following output:
Pachycephalosaurus
Amargasaurus
Tyrannosaurus
Mamenchisaurus
Deinonychus
Edmontosaurus
Sort
Amargasaurus
Deinonychus
Edmontosaurus
Mamenchisaurus
Pachycephalosaurus
Tyrannosaurus
BinarySearch for 'Coelophysis':
Not found. Sorts between: Amargasaurus and Deinonychus.
BinarySearch for 'Tyrannosaurus':
Found at index 5.
*/
open System
let showWhere (array: 'a []) index =
if index < 0 then
// If the index is negative, it represents the bitwise
// complement of the next larger element in the array.
let index = ~~~index
printf "Not found. Sorts between: "
if index = 0 then
printf "beginning of array and "
else
printf $"{array[index - 1]} and "
if index = array.Length then
printfn "end of array."
else
printfn $"{array[index]}."
else
printfn $"Found at index {index}."
let dinosaurs =
[| "Pachycephalosaurus"
"Amargasaurus"
"Tyrannosaurus"
"Mamenchisaurus"
"Deinonychus"
"Edmontosaurus" |]
printfn ""
for dino in dinosaurs do
printfn $"{dino}"
printfn "\nSort"
Array.Sort dinosaurs
printfn ""
for dino in dinosaurs do
printfn $"{dino}"
printfn "\nBinarySearch for 'Coelophysis':"
let index = Array.BinarySearch(dinosaurs, "Coelophysis")
showWhere dinosaurs index
printfn "\nBinarySearch for 'Tyrannosaurus':"
Array.BinarySearch(dinosaurs, "Tyrannosaurus")
|> showWhere dinosaurs
// This code example produces the following output:
//
// Pachycephalosaurus
// Amargasaurus
// Tyrannosaurus
// Mamenchisaurus
// Deinonychus
// Edmontosaurus
//
// Sort
//
// Amargasaurus
// Deinonychus
// Edmontosaurus
// Mamenchisaurus
// Pachycephalosaurus
// Tyrannosaurus
//
// BinarySearch for 'Coelophysis':
// Not found. Sorts between: Amargasaurus and Deinonychus.
//
// BinarySearch for 'Tyrannosaurus':
// Found at index 5.
Imports System.Collections.Generic
Public Class Example
Public Shared Sub Main()
Dim dinosaurs() As String = { _
"Pachycephalosaurus", _
"Amargasaurus", _
"Tyrannosaurus", _
"Mamenchisaurus", _
"Deinonychus", _
"Edmontosaurus" }
Console.WriteLine()
For Each dinosaur As String In dinosaurs
Console.WriteLine(dinosaur)
Next
Console.WriteLine(vbLf & "Sort")
Array.Sort(dinosaurs)
Console.WriteLine()
For Each dinosaur As String In dinosaurs
Console.WriteLine(dinosaur)
Next
Console.WriteLine(vbLf & _
"BinarySearch for 'Coelophysis':")
Dim index As Integer = _
Array.BinarySearch(dinosaurs, "Coelophysis")
ShowWhere(dinosaurs, index)
Console.WriteLine(vbLf & _
"BinarySearch for 'Tyrannosaurus':")
index = Array.BinarySearch(dinosaurs, "Tyrannosaurus")
ShowWhere(dinosaurs, index)
End Sub
Private Shared Sub ShowWhere(Of T) _
(ByVal array() As T, ByVal index As Integer)
If index < 0 Then
' If the index is negative, it represents the bitwise
' complement of the next larger element in the array.
'
index = index Xor -1
Console.Write("Not found. Sorts between: ")
If index = 0 Then
Console.Write("beginning of array and ")
Else
Console.Write("{0} and ", array(index - 1))
End If
If index = array.Length Then
Console.WriteLine("end of array.")
Else
Console.WriteLine("{0}.", array(index))
End If
Else
Console.WriteLine("Found at index {0}.", index)
End If
End Sub
End Class
' This code example produces the following output:
'
'Pachycephalosaurus
'Amargasaurus
'Tyrannosaurus
'Mamenchisaurus
'Deinonychus
'Edmontosaurus
'
'Sort
'
'Amargasaurus
'Deinonychus
'Edmontosaurus
'Mamenchisaurus
'Pachycephalosaurus
'Tyrannosaurus
'
'BinarySearch for 'Coelophysis':
'Not found. Sorts between: Amargasaurus and Deinonychus.
'
'BinarySearch for 'Tyrannosaurus':
'Found at index 5.
Hinweise
Jedes Element von array
muss die IComparable<T> generische Schnittstelle implementieren, damit Vergleiche mit jedem anderen Element in array
möglich sind.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner oder gleich 16 Elemente ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der Elemente bei, die gleich sind.
Bei dieser Methode handelt es sich um einen O(n
log n
)-Vorgang, wobei n
der Length von array
ist.
Weitere Informationen
Gilt für:
Sort<T>(T[], IComparer<T>)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert die Elemente in einem Array mithilfe der angegebenen generischen IComparer<T>-Schnittstelle.
public:
generic <typename T>
static void Sort(cli::array <T> ^ array, System::Collections::Generic::IComparer<T> ^ comparer);
public static void Sort<T> (T[] array, System.Collections.Generic.IComparer<T> comparer);
public static void Sort<T> (T[] array, System.Collections.Generic.IComparer<T>? comparer);
static member Sort : 'T[] * System.Collections.Generic.IComparer<'T> -> unit
Public Shared Sub Sort(Of T) (array As T(), comparer As IComparer(Of T))
Typparameter
- T
Der Typ der Elemente des Arrays.
Parameter
- array
- T[]
Die eindimensionale Nullbasis Array , die sortiert werden soll.
- comparer
- IComparer<T>
Die Implementierung der generischen IComparer<T>-Schnittstelle, die für den Vergleich von Elementen verwendet werden soll, oder null
, um die Implementierung der generischen IComparable<T>-Schnittstelle der einzelnen Elemente zu verwenden.
Ausnahmen
array
ist null
.
comparer
ist null
, und in einem oder mehreren Elementen im array
ist die generische IComparable<T>-Schnittstelle nicht implementiert.
Die Implementierung von comparer
hat einen Fehler während der Sortierung verursacht. Beispielsweise gibt comparer
beim Vergleichen eines Elements mit sich selbst möglicherweise nicht 0 zurück.
Beispiele
Das folgende Codebeispiel veranschaulicht die Sort<T>(T[], IComparer<T>) generische Methodenüberladung und die BinarySearch<T>(T[], T, IComparer<T>) generische Methodenüberladung.
Im Codebeispiel wird ein alternativer Vergleich für Zeichenfolgen mit dem Namen ReverseCompare
definiert, der die IComparer<string>
generische Schnittstelle (IComparer(Of String)
in Visual Basic in IComparer<String^>
Visual C++) implementiert. Der Comparer ruft die CompareTo(String) -Methode auf, wobei die Reihenfolge der Vergleiche umgekehrt wird, sodass die Zeichenfolgen hoch nach niedrig statt niedrig nach hoch sortieren.
Das Array wird angezeigt, sortiert und erneut angezeigt. Arrays müssen sortiert werden, um die BinarySearch -Methode verwenden zu können.
Hinweis
Die Aufrufe der Sort<T>(T[], IComparer<T>) generischen Methoden und BinarySearch<T>(T[], T, IComparer<T>) der generischen Methoden unterscheiden sich nicht von Aufrufen ihrer nichtgenerischen Entsprechungen, da Visual Basic, C# und C++ den Typ des generischen Typparameters vom Typ des ersten Arguments ableiten. Wenn Sie die Ildasm.exe (IL Disassembler) verwenden, um die Microsoft Intermediate Language (MSIL) zu untersuchen, können Sie sehen, dass die generischen Methoden aufgerufen werden.
Die BinarySearch<T>(T[], T, IComparer<T>) generische Methodenüberladung wird dann verwendet, um nach zwei Zeichenfolgen zu suchen, eine, die sich nicht im Array befindet, und eine, die ist. Das Array und der Rückgabewert der BinarySearch<T>(T[], T, IComparer<T>) -Methode werden an die ShowWhere
generische Methode übergeben, die den Indexwert anzeigt, wenn die Zeichenfolge gefunden wird, und andernfalls die Elemente, zwischen denen die Suchzeichenfolge liegen würde, wenn sie im Array wären. Der Index ist negativ, wenn die Zeichenfolge nicht das Array ist, sodass die ShowWhere
-Methode die bitweise Ergänzung (der ~-Operator in C# und Visual C++, -1 in Visual Basic) verwendet, Xor
um den Index des ersten Elements in der Liste abzurufen, das größer als die Suchzeichenfolge ist.
using namespace System;
using namespace System::Collections::Generic;
public ref class ReverseComparer: IComparer<String^>
{
public:
virtual int Compare(String^ x, String^ y)
{
// Compare y and x in reverse order.
return y->CompareTo(x);
}
};
generic<typename T> void ShowWhere(array<T>^ arr, int index)
{
if (index<0)
{
// If the index is negative, it represents the bitwise
// complement of the next larger element in the array.
//
index = ~index;
Console::Write("Not found. Sorts between: ");
if (index == 0)
Console::Write("beginning of array and ");
else
Console::Write("{0} and ", arr[index-1]);
if (index == arr->Length)
Console::WriteLine("end of array.");
else
Console::WriteLine("{0}.", arr[index]);
}
else
{
Console::WriteLine("Found at index {0}.", index);
}
};
void main()
{
array<String^>^ dinosaurs = {"Pachycephalosaurus",
"Amargasaurus",
"Tyrannosaurus",
"Mamenchisaurus",
"Deinonychus",
"Edmontosaurus"};
Console::WriteLine();
for each(String^ dinosaur in dinosaurs)
{
Console::WriteLine(dinosaur);
}
ReverseComparer^ rc = gcnew ReverseComparer();
Console::WriteLine("\nSort");
Array::Sort(dinosaurs, rc);
Console::WriteLine();
for each(String^ dinosaur in dinosaurs)
{
Console::WriteLine(dinosaur);
}
Console::WriteLine("\nBinarySearch for 'Coelophysis':");
int index = Array::BinarySearch(dinosaurs, "Coelophysis", rc);
ShowWhere(dinosaurs, index);
Console::WriteLine("\nBinarySearch for 'Tyrannosaurus':");
index = Array::BinarySearch(dinosaurs, "Tyrannosaurus", rc);
ShowWhere(dinosaurs, index);
}
/* This code example produces the following output:
Pachycephalosaurus
Amargasaurus
Tyrannosaurus
Mamenchisaurus
Deinonychus
Edmontosaurus
Sort
Tyrannosaurus
Pachycephalosaurus
Mamenchisaurus
Edmontosaurus
Deinonychus
Amargasaurus
BinarySearch for 'Coelophysis':
Not found. Sorts between: Deinonychus and Amargasaurus.
BinarySearch for 'Tyrannosaurus':
Found at index 0.
*/
using System;
using System.Collections.Generic;
public class ReverseComparer: IComparer<string>
{
public int Compare(string x, string y)
{
// Compare y and x in reverse order.
return y.CompareTo(x);
}
}
public class Example
{
public static void Main()
{
string[] dinosaurs = {"Pachycephalosaurus",
"Amargasaurus",
"Tyrannosaurus",
"Mamenchisaurus",
"Deinonychus",
"Edmontosaurus"};
Console.WriteLine();
foreach( string dinosaur in dinosaurs )
{
Console.WriteLine(dinosaur);
}
ReverseComparer rc = new ReverseComparer();
Console.WriteLine("\nSort");
Array.Sort(dinosaurs, rc);
Console.WriteLine();
foreach( string dinosaur in dinosaurs )
{
Console.WriteLine(dinosaur);
}
Console.WriteLine("\nBinarySearch for 'Coelophysis':");
int index = Array.BinarySearch(dinosaurs, "Coelophysis", rc);
ShowWhere(dinosaurs, index);
Console.WriteLine("\nBinarySearch for 'Tyrannosaurus':");
index = Array.BinarySearch(dinosaurs, "Tyrannosaurus", rc);
ShowWhere(dinosaurs, index);
}
private static void ShowWhere<T>(T[] array, int index)
{
if (index<0)
{
// If the index is negative, it represents the bitwise
// complement of the next larger element in the array.
//
index = ~index;
Console.Write("Not found. Sorts between: ");
if (index == 0)
Console.Write("beginning of array and ");
else
Console.Write("{0} and ", array[index-1]);
if (index == array.Length)
Console.WriteLine("end of array.");
else
Console.WriteLine("{0}.", array[index]);
}
else
{
Console.WriteLine("Found at index {0}.", index);
}
}
}
/* This code example produces the following output:
Pachycephalosaurus
Amargasaurus
Tyrannosaurus
Mamenchisaurus
Deinonychus
Edmontosaurus
Sort
Tyrannosaurus
Pachycephalosaurus
Mamenchisaurus
Edmontosaurus
Deinonychus
Amargasaurus
BinarySearch for 'Coelophysis':
Not found. Sorts between: Deinonychus and Amargasaurus.
BinarySearch for 'Tyrannosaurus':
Found at index 0.
*/
open System
open System.Collections.Generic
type ReverseComparer() =
interface IComparer<string> with
member _.Compare(x, y) =
// Compare y and x in reverse order.
y.CompareTo x
let showWhere (array: 'a []) index =
if index < 0 then
// If the index is negative, it represents the bitwise
// complement of the next larger element in the array.
let index = ~~~index
printf "Not found. Sorts between: "
if index = 0 then
printf "beginning of array and "
else
printf $"{array[index - 1]} and "
if index = array.Length then
printfn "end of array."
else
printfn $"{array[index]}."
else
printfn $"Found at index {index}."
let dinosaurs =
[| "Pachycephalosaurus"
"Amargasaurus"
"Tyrannosaurus"
"Mamenchisaurus"
"Deinonychus"
"Edmontosaurus" |]
printfn ""
for dino in dinosaurs do
printfn $"{dino}"
let rc = ReverseComparer()
printfn "\nSort"
Array.Sort(dinosaurs, rc)
printfn ""
for dino in dinosaurs do
printfn $"{dino}"
printfn "\nBinarySearch for 'Coelophysis':"
Array.BinarySearch(dinosaurs, "Coelophysis", rc)
|> showWhere dinosaurs
printfn "\nBinarySearch for 'Tyrannosaurus':"
Array.BinarySearch(dinosaurs, "Tyrannosaurus", rc)
|> showWhere dinosaurs
// This code example produces the following output:
// Pachycephalosaurus
// Amargasaurus
// Tyrannosaurus
// Mamenchisaurus
// Deinonychus
// Edmontosaurus
//
// Sort
//
// Tyrannosaurus
// Pachycephalosaurus
// Mamenchisaurus
// Edmontosaurus
// Deinonychus
// Amargasaurus
//
// BinarySearch for 'Coelophysis':
// Not found. Sorts between: Deinonychus and Amargasaurus.
//
// BinarySearch for 'Tyrannosaurus':
// Found at index 0.
Imports System.Collections.Generic
Public Class ReverseComparer
Implements IComparer(Of String)
Public Function Compare(ByVal x As String, _
ByVal y As String) As Integer _
Implements IComparer(Of String).Compare
' Compare y and x in reverse order.
Return y.CompareTo(x)
End Function
End Class
Public Class Example
Public Shared Sub Main()
Dim dinosaurs() As String = { _
"Pachycephalosaurus", _
"Amargasaurus", _
"Tyrannosaurus", _
"Mamenchisaurus", _
"Deinonychus", _
"Edmontosaurus" }
Console.WriteLine()
For Each dinosaur As String In dinosaurs
Console.WriteLine(dinosaur)
Next
Dim rc As New ReverseComparer()
Console.WriteLine(vbLf & "Sort")
Array.Sort(dinosaurs, rc)
Console.WriteLine()
For Each dinosaur As String In dinosaurs
Console.WriteLine(dinosaur)
Next
Console.WriteLine(vbLf & _
"BinarySearch for 'Coelophysis':")
Dim index As Integer = _
Array.BinarySearch(dinosaurs, "Coelophysis", rc)
ShowWhere(dinosaurs, index)
Console.WriteLine(vbLf & _
"BinarySearch for 'Tyrannosaurus':")
index = Array.BinarySearch(dinosaurs, "Tyrannosaurus", rc)
ShowWhere(dinosaurs, index)
End Sub
Private Shared Sub ShowWhere(Of T) _
(ByVal array() As T, ByVal index As Integer)
If index < 0 Then
' If the index is negative, it represents the bitwise
' complement of the next larger element in the array.
'
index = index Xor -1
Console.Write("Not found. Sorts between: ")
If index = 0 Then
Console.Write("beginning of array and ")
Else
Console.Write("{0} and ", array(index - 1))
End If
If index = array.Length Then
Console.WriteLine("end of array.")
Else
Console.WriteLine("{0}.", array(index))
End If
Else
Console.WriteLine("Found at index {0}.", index)
End If
End Sub
End Class
' This code example produces the following output:
'
'Pachycephalosaurus
'Amargasaurus
'Tyrannosaurus
'Mamenchisaurus
'Deinonychus
'Edmontosaurus
'
'Sort
'
'Tyrannosaurus
'Pachycephalosaurus
'Mamenchisaurus
'Edmontosaurus
'Deinonychus
'Amargasaurus
'
'BinarySearch for 'Coelophysis':
'Not found. Sorts between: Deinonychus and Amargasaurus.
'
'BinarySearch for 'Tyrannosaurus':
'Found at index 0.
Hinweise
Wenn comparer
ist null
, muss jedes Element von array
die IComparable<T> generische Schnittstelle implementieren, damit vergleicht werden kann mit jedem anderen Element in array
.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner oder gleich 16 Elemente ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der Elemente bei, die gleich sind.
Bei dieser Methode handelt es sich um einen O(n
log n
)-Vorgang, wobei n
der Length von array
ist.
Hinweise für Aufrufer
.NET Framework 4 und früheren Versionen wurden nur der Quicksort-Algorithmus verwendet. Quicksort identifiziert ungültige Vergleiche in einigen Situationen, in denen der Sortiervorgang eine IndexOutOfRangeException Ausnahme auslöst, und löst eine Ausnahme für den Aufrufer aus ArgumentException . Ab .NET Framework 4.5 ist es möglich, dass sortiervorgänge, die zuvor ausgelöst ArgumentException wurden, keine Ausnahme auslösen, da die Einfügesortierungs- und Heapsortalgorithmen keinen ungültigen Vergleich erkennen. Dies gilt in den meisten Fällen für Arrays mit weniger als oder gleich 16 Elementen.
Weitere Informationen
- IComparer<T>
- IComparable<T>
- BinarySearch
- Durchführen kulturunabhängiger Zeichenfolgenoperationen in Arrays
Gilt für:
Sort<T>(T[], Comparison<T>)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert die Elemente in einem Array mithilfe des angegebenen Comparison<T>.
public:
generic <typename T>
static void Sort(cli::array <T> ^ array, Comparison<T> ^ comparison);
public static void Sort<T> (T[] array, Comparison<T> comparison);
static member Sort : 'T[] * Comparison<'T> -> unit
Public Shared Sub Sort(Of T) (array As T(), comparison As Comparison(Of T))
Typparameter
- T
Der Typ der Elemente des Arrays.
Parameter
- array
- T[]
Das zu sortierende eindimensionale und nullbasierte Array.
- comparison
- Comparison<T>
Die Comparison<T>, die beim Vergleich von Elementen verwendet werden soll.
Ausnahmen
Die Implementierung von comparison
hat einen Fehler während der Sortierung verursacht. Beispielsweise gibt comparison
beim Vergleichen eines Elements mit sich selbst möglicherweise nicht 0 zurück.
Beispiele
Im folgenden Codebeispiel wird veranschaulicht, die Sort(Comparison<T>) -methodenüberladung.
Im Codebeispiel wird eine alternative Vergleichsmethode für Zeichenfolgen mit dem Namen CompareDinosByLength
definiert. Diese Methode funktioniert wie folgt: Zunächst werden die Vergleiche getestetnull
, und ein NULL-Verweis wird als kleiner als ein ungleich null behandelt. Zweitens werden die Zeichenfolgenlängen verglichen, und die längere Zeichenfolge wird als größer eingestuft. Drittens: Wenn die Längen gleich sind, wird ein normaler Zeichenfolgenvergleich verwendet.
Ein Array von Zeichenfolgen wird erstellt und mit vier Zeichenfolgen in keiner bestimmten Reihenfolge aufgefüllt. Die Liste enthält auch eine leere Zeichenfolge und einen NULL-Verweis. Die Liste wird angezeigt, mithilfe eines Comparison<T> generischen Delegaten sortiert, der die CompareDinosByLength
-Methode darstellt, und erneut angezeigt.
using namespace System;
using namespace System::Collections::Generic;
int CompareDinosByLength(String^ x, String^ y)
{
if (x == nullptr)
{
if (y == nullptr)
{
// If x is null and y is null, they're
// equal.
return 0;
}
else
{
// If x is null and y is not null, y
// is greater.
return -1;
}
}
else
{
// If x is not null...
//
if (y == nullptr)
// ...and y is null, x is greater.
{
return 1;
}
else
{
// ...and y is not null, compare the
// lengths of the two strings.
//
int retval = x->Length.CompareTo(y->Length);
if (retval != 0)
{
// If the strings are not of equal length,
// the longer string is greater.
//
return retval;
}
else
{
// If the strings are of equal length,
// sort them with ordinary string comparison.
//
return x->CompareTo(y);
}
}
}
};
void Display(array<String^>^ arr)
{
Console::WriteLine();
for each(String^ s in arr)
{
if (s == nullptr)
Console::WriteLine("(null)");
else
Console::WriteLine("\"{0}\"", s);
}
};
void main()
{
array<String^>^ dinosaurs = {
"Pachycephalosaurus",
"Amargasaurus",
"",
nullptr,
"Mamenchisaurus",
"Deinonychus" };
Display(dinosaurs);
Console::WriteLine("\nSort with generic Comparison<String^> delegate:");
Array::Sort(dinosaurs,
gcnew Comparison<String^>(CompareDinosByLength));
Display(dinosaurs);
}
/* This code example produces the following output:
"Pachycephalosaurus"
"Amargasaurus"
""
(null)
"Mamenchisaurus"
"Deinonychus"
Sort with generic Comparison<String^> delegate:
(null)
""
"Deinonychus"
"Amargasaurus"
"Mamenchisaurus"
"Pachycephalosaurus"
*/
using System;
using System.Collections.Generic;
public class Example
{
private static int CompareDinosByLength(string x, string y)
{
if (x == null)
{
if (y == null)
{
// If x is null and y is null, they're
// equal.
return 0;
}
else
{
// If x is null and y is not null, y
// is greater.
return -1;
}
}
else
{
// If x is not null...
//
if (y == null)
// ...and y is null, x is greater.
{
return 1;
}
else
{
// ...and y is not null, compare the
// lengths of the two strings.
//
int retval = x.Length.CompareTo(y.Length);
if (retval != 0)
{
// If the strings are not of equal length,
// the longer string is greater.
//
return retval;
}
else
{
// If the strings are of equal length,
// sort them with ordinary string comparison.
//
return x.CompareTo(y);
}
}
}
}
public static void Main()
{
string[] dinosaurs = {
"Pachycephalosaurus",
"Amargasaurus",
"",
null,
"Mamenchisaurus",
"Deinonychus" };
Display(dinosaurs);
Console.WriteLine("\nSort with generic Comparison<string> delegate:");
Array.Sort(dinosaurs, CompareDinosByLength);
Display(dinosaurs);
}
private static void Display(string[] arr)
{
Console.WriteLine();
foreach( string s in arr )
{
if (s == null)
Console.WriteLine("(null)");
else
Console.WriteLine("\"{0}\"", s);
}
}
}
/* This code example produces the following output:
"Pachycephalosaurus"
"Amargasaurus"
""
(null)
"Mamenchisaurus"
"Deinonychus"
Sort with generic Comparison<string> delegate:
(null)
""
"Deinonychus"
"Amargasaurus"
"Mamenchisaurus"
"Pachycephalosaurus"
*/
open System
let compareDinosByLength (x: string) (y: string) =
match x with
// If x is null and y is null, they're equal.
| null when isNull y -> 0
// If x is null and y is not null, y is greater.
| null -> -1
// If x is not null and y is null, x is greater.
| _ when isNull y -> 1
// If x is not null and y is not null, compare the lengths of the two strings.
| _ ->
let retval = x.Length.CompareTo y.Length
if retval <> 0 then
// If the strings are not of equal length, the longer string is greater.
retval
else
// If the strings are of equal length, sort them with ordinary string comparison.
x.CompareTo y
let display arr =
printfn ""
for s in arr do
if isNull s then
printfn "(null)"
else
printfn $"\"{s}\""
let dinosaurs =
[| "Pachycephalosaurus"
"Amargasaurus"
""
null
"Mamenchisaurus"
"Deinonychus" |]
display dinosaurs
printfn "\nSort with generic Comparison<string> delegate:"
Array.Sort(dinosaurs, compareDinosByLength)
display dinosaurs
// This code example produces the following output:
//
// "Pachycephalosaurus"
// "Amargasaurus"
// ""
// (null)
// "Mamenchisaurus"
// "Deinonychus"
//
// Sort with generic Comparison<string> delegate:
//
// (null)
// ""
// "Deinonychus"
// "Amargasaurus"
// "Mamenchisaurus"
// "Pachycephalosaurus"
//
Imports System.Collections.Generic
Public Class Example
Private Shared Function CompareDinosByLength( _
ByVal x As String, ByVal y As String) As Integer
If x Is Nothing Then
If y Is Nothing Then
' If x is Nothing and y is Nothing, they're
' equal.
Return 0
Else
' If x is Nothing and y is not Nothing, y
' is greater.
Return -1
End If
Else
' If x is not Nothing...
'
If y Is Nothing Then
' ...and y is Nothing, x is greater.
Return 1
Else
' ...and y is not Nothing, compare the
' lengths of the two strings.
'
Dim retval As Integer = _
x.Length.CompareTo(y.Length)
If retval <> 0 Then
' If the strings are not of equal length,
' the longer string is greater.
'
Return retval
Else
' If the strings are of equal length,
' sort them with ordinary string comparison.
'
Return x.CompareTo(y)
End If
End If
End If
End Function
Public Shared Sub Main()
Dim dinosaurs() As String = { _
"Pachycephalosaurus", _
"Amargasaurus", _
"", _
Nothing, _
"Mamenchisaurus", _
"Deinonychus" }
Display(dinosaurs)
Console.WriteLine(vbLf & "Sort with generic Comparison(Of String) delegate:")
Array.Sort(dinosaurs, AddressOf CompareDinosByLength)
Display(dinosaurs)
End Sub
Private Shared Sub Display(ByVal arr() As String)
Console.WriteLine()
For Each s As String In arr
If s Is Nothing Then
Console.WriteLine("(Nothing)")
Else
Console.WriteLine("""{0}""", s)
End If
Next
End Sub
End Class
' This code example produces the following output:
'
'"Pachycephalosaurus"
'"Amargasaurus"
'""
'(Nothing)
'"Mamenchisaurus"
'"Deinonychus"
'
'Sort with generic Comparison(Of String) delegate:
'
'(Nothing)
'""
'"Deinonychus"
'"Amargasaurus"
'"Mamenchisaurus"
'"Pachycephalosaurus"
Hinweise
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner als oder gleich 16 Elementen ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der elemente bei, die gleich sind.
Diese Methode ist ein O(n
log n
) -Vorgang, wobei n
der Length von array
ist.
Hinweise für Aufrufer
.NET Framework 4 und früheren Versionen wurden nur der Quicksort-Algorithmus verwendet. Quicksort identifiziert ungültige Vergleiche in einigen Situationen, in denen der Sortiervorgang eine IndexOutOfRangeException Ausnahme auslöst, und löst eine Ausnahme für den Aufrufer aus ArgumentException . Ab .NET Framework 4.5 ist es möglich, dass sortiervorgänge, die zuvor ausgelöst ArgumentException wurden, keine Ausnahme auslösen, da die Einfügesortierungs- und Heapsortalgorithmen keinen ungültigen Vergleich erkennen. Dies gilt in den meisten Fällen für Arrays mit weniger als oder gleich 6 Elementen.
Weitere Informationen
Gilt für:
Sort<T>(T[], Int32, Int32)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert die Elemente in einem Bereich von Elementen in einem Array mithilfe der Implementierung der generischen IComparable<T>-Schnittstelle jedes Elements des Array.
public:
generic <typename T>
static void Sort(cli::array <T> ^ array, int index, int length);
public static void Sort<T> (T[] array, int index, int length);
static member Sort : 'T[] * int * int -> unit
Public Shared Sub Sort(Of T) (array As T(), index As Integer, length As Integer)
Typparameter
- T
Der Typ der Elemente des Arrays.
Parameter
- array
- T[]
Das zu sortierende eindimensionale und nullbasierte Array.
- index
- Int32
Der Startindex des zu sortierenden Bereichs.
- length
- Int32
Die Anzahl der Elemente im zu sortierenden Bereich.
Ausnahmen
array
ist null
.
index
ist kleiner als die untere array
-Grenze.
- oder -
length
ist kleiner als Null.
index
und length
geben keinen gültigen Bereich im array
an.
In einem oder mehreren Elementen in array
ist die generische IComparable<T>-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Codebeispiel werden die Sort<T>(T[], Int32, Int32) generische Methodenüberladung und die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) generische Methodenüberladung zum Sortieren eines Bereichs in einem Array veranschaulicht.
Im Codebeispiel wird ein alternativer Vergleich für Zeichenfolgen mit dem Namen ReverseCompare
definiert, der die IComparer<string>
generische Schnittstelle (IComparer(Of String)
in Visual Basic, IComparer<String^>
in Visual C++) implementiert. Der Comparer ruft die CompareTo(String) -Methode auf, wobei die Reihenfolge der Vergleiche umgekehrt wird, sodass die Zeichenfolgen hoch nach niedrig statt niedrig nach hoch sortieren.
Das Codebeispiel erstellt und zeigt ein Array von Dinosauriernamen an, bestehend aus drei Pflanzenfressern, gefolgt von drei Fleischfressern (Tyrannosauriden, um genau zu sein). Die Sort<T>(T[], Int32, Int32) generische Methodenüberladung wird verwendet, um die letzten drei Elemente des Arrays zu sortieren, die dann angezeigt wird. Die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) generische Methodenüberladung wird mit ReverseCompare
verwendet, um die letzten drei Elemente in umgekehrter Reihenfolge zu sortieren. Die gründlich verwirrten Dinosaurier werden wieder angezeigt.
Hinweis
Die Aufrufe der Sort<T>(T[], IComparer<T>) generischen Methoden und BinarySearch<T>(T[], T, IComparer<T>) unterscheiden sich nicht von Aufrufen ihrer nicht generischen Entsprechungen, da Visual Basic, C# und C++ den Typ des generischen Typparameters vom Typ des ersten Arguments ableiten. Wenn Sie die Ildasm.exe (IL Disassembler) verwenden, um die Microsoft Intermediate Language (MSIL) zu untersuchen, können Sie sehen, dass die generischen Methoden aufgerufen werden.
using namespace System;
using namespace System::Collections::Generic;
public ref class ReverseComparer: IComparer<String^>
{
public:
virtual int Compare(String^ x, String^ y)
{
// Compare y and x in reverse order.
return y->CompareTo(x);
}
};
void main()
{
array<String^>^ dinosaurs = {"Pachycephalosaurus",
"Amargasaurus",
"Mamenchisaurus",
"Tarbosaurus",
"Tyrannosaurus",
"Albertasaurus"};
Console::WriteLine();
for each(String^ dinosaur in dinosaurs)
{
Console::WriteLine(dinosaur);
}
Console::WriteLine("\nSort(dinosaurs, 3, 3)");
Array::Sort(dinosaurs, 3, 3);
Console::WriteLine();
for each(String^ dinosaur in dinosaurs)
{
Console::WriteLine(dinosaur);
}
ReverseComparer^ rc = gcnew ReverseComparer();
Console::WriteLine("\nSort(dinosaurs, 3, 3, rc)");
Array::Sort(dinosaurs, 3, 3, rc);
Console::WriteLine();
for each(String^ dinosaur in dinosaurs)
{
Console::WriteLine(dinosaur);
}
}
/* This code example produces the following output:
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Tarbosaurus
Tyrannosaurus
Albertasaurus
Sort(dinosaurs, 3, 3)
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Albertasaurus
Tarbosaurus
Tyrannosaurus
Sort(dinosaurs, 3, 3, rc)
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Tyrannosaurus
Tarbosaurus
Albertasaurus
*/
using System;
using System.Collections.Generic;
public class ReverseComparer: IComparer<string>
{
public int Compare(string x, string y)
{
// Compare y and x in reverse order.
return y.CompareTo(x);
}
}
public class Example
{
public static void Main()
{
string[] dinosaurs = {"Pachycephalosaurus",
"Amargasaurus",
"Mamenchisaurus",
"Tarbosaurus",
"Tyrannosaurus",
"Albertasaurus"};
Console.WriteLine();
foreach( string dinosaur in dinosaurs )
{
Console.WriteLine(dinosaur);
}
Console.WriteLine("\nSort(dinosaurs, 3, 3)");
Array.Sort(dinosaurs, 3, 3);
Console.WriteLine();
foreach( string dinosaur in dinosaurs )
{
Console.WriteLine(dinosaur);
}
ReverseComparer rc = new ReverseComparer();
Console.WriteLine("\nSort(dinosaurs, 3, 3, rc)");
Array.Sort(dinosaurs, 3, 3, rc);
Console.WriteLine();
foreach( string dinosaur in dinosaurs )
{
Console.WriteLine(dinosaur);
}
}
}
/* This code example produces the following output:
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Tarbosaurus
Tyrannosaurus
Albertasaurus
Sort(dinosaurs, 3, 3)
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Albertasaurus
Tarbosaurus
Tyrannosaurus
Sort(dinosaurs, 3, 3, rc)
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Tyrannosaurus
Tarbosaurus
Albertasaurus
*/
open System
open System.Collections.Generic
type ReverseComparer() =
interface IComparer<string> with
member _.Compare(x, y) =
y.CompareTo x
let dinosaurs =
[| "Pachycephalosaurus"
"Amargasaurus"
"Mamenchisaurus"
"Tarbosaurus"
"Tyrannosaurus"
"Albertasaurus" |]
printfn ""
for dino in dinosaurs do
printfn $"{dino}"
printfn "\nSort(dinosaurs, 3, 3)"
Array.Sort(dinosaurs, 3, 3)
printfn ""
for dino in dinosaurs do
printfn $"{dino}"
let rc = ReverseComparer()
printfn "\nSort(dinosaurs, 3, 3, rc)"
Array.Sort(dinosaurs, 3, 3, rc)
printfn ""
for dino in dinosaurs do
printfn $"{dino}"
// This code example produces the following output:
//
// Pachycephalosaurus
// Amargasaurus
// Mamenchisaurus
// Tarbosaurus
// Tyrannosaurus
// Albertasaurus
//
// Sort(dinosaurs, 3, 3)
//
// Pachycephalosaurus
// Amargasaurus
// Mamenchisaurus
// Albertasaurus
// Tarbosaurus
// Tyrannosaurus
//
// Sort(dinosaurs, 3, 3, rc)
//
// Pachycephalosaurus
// Amargasaurus
// Mamenchisaurus
// Tyrannosaurus
// Tarbosaurus
// Albertasaurus
Imports System.Collections.Generic
Public Class ReverseComparer
Implements IComparer(Of String)
Public Function Compare(ByVal x As String, _
ByVal y As String) As Integer _
Implements IComparer(Of String).Compare
' Compare y and x in reverse order.
Return y.CompareTo(x)
End Function
End Class
Public Class Example
Public Shared Sub Main()
Dim dinosaurs() As String = { _
"Pachycephalosaurus", _
"Amargasaurus", _
"Mamenchisaurus", _
"Tarbosaurus", _
"Tyrannosaurus", _
"Albertasaurus" }
Console.WriteLine()
For Each dinosaur As String In dinosaurs
Console.WriteLine(dinosaur)
Next
Console.WriteLine(vbLf & "Sort(dinosaurs, 3, 3)")
Array.Sort(dinosaurs, 3, 3)
Console.WriteLine()
For Each dinosaur As String In dinosaurs
Console.WriteLine(dinosaur)
Next
Dim rc As New ReverseComparer()
Console.WriteLine(vbLf & "Sort(dinosaurs, 3, 3, rc)")
Array.Sort(dinosaurs, 3, 3, rc)
Console.WriteLine()
For Each dinosaur As String In dinosaurs
Console.WriteLine(dinosaur)
Next
End Sub
End Class
' This code example produces the following output:
'
'Pachycephalosaurus
'Amargasaurus
'Mamenchisaurus
'Tarbosaurus
'Tyrannosaurus
'Albertasaurus
'
'Sort(dinosaurs, 3, 3)
'
'Pachycephalosaurus
'Amargasaurus
'Mamenchisaurus
'Albertasaurus
'Tarbosaurus
'Tyrannosaurus
'
'Sort(dinosaurs, 3, 3, rc)
'
'Pachycephalosaurus
'Amargasaurus
'Mamenchisaurus
'Tyrannosaurus
'Tarbosaurus
'Albertasaurus
Hinweise
Jedes Element innerhalb des angegebenen Elementbereichs in array
muss die IComparable<T> generische Schnittstelle implementieren, um Vergleiche mit jedem anderen Element in array
durchführen zu können.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner als oder gleich 16 Elementen ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der elemente bei, die gleich sind.
Diese Methode ist ein O(n
log n
) -Vorgang, wobei n
ist length
.
Weitere Informationen
Gilt für:
Sort<T>(T[], Int32, Int32, IComparer<T>)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert die Elemente in einem Bereich von Elementen im Array mithilfe der angegebenen generischen IComparer<T>-Schnittstelle.
public:
generic <typename T>
static void Sort(cli::array <T> ^ array, int index, int length, System::Collections::Generic::IComparer<T> ^ comparer);
public static void Sort<T> (T[] array, int index, int length, System.Collections.Generic.IComparer<T> comparer);
public static void Sort<T> (T[] array, int index, int length, System.Collections.Generic.IComparer<T>? comparer);
static member Sort : 'T[] * int * int * System.Collections.Generic.IComparer<'T> -> unit
Public Shared Sub Sort(Of T) (array As T(), index As Integer, length As Integer, comparer As IComparer(Of T))
Typparameter
- T
Der Typ der Elemente des Arrays.
Parameter
- array
- T[]
Das zu sortierende eindimensionale und nullbasierte Array.
- index
- Int32
Der Startindex des zu sortierenden Bereichs.
- length
- Int32
Die Anzahl der Elemente im zu sortierenden Bereich.
- comparer
- IComparer<T>
Die Implementierung der generischen IComparer<T>-Schnittstelle, die für den Vergleich von Elementen verwendet werden soll, oder null
, um die Implementierung der generischen IComparable<T>-Schnittstelle der einzelnen Elemente zu verwenden.
Ausnahmen
array
ist null
.
index
ist kleiner als die untere array
-Grenze.
- oder -
length
ist kleiner als Null.
index
und length
geben keinen gültigen Bereich im array
an.
- oder -
Die Implementierung von comparer
hat einen Fehler während der Sortierung verursacht. Beispielsweise gibt comparer
beim Vergleichen eines Elements mit sich selbst möglicherweise nicht 0 zurück.
comparer
ist null
, und in einem oder mehreren Elementen im array
ist die generische IComparable<T>-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Codebeispiel werden die Sort<T>(T[], Int32, Int32) generische Methodenüberladung und die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) generische Methodenüberladung zum Sortieren eines Bereichs in einem Array veranschaulicht.
Im Codebeispiel wird ein alternativer Vergleich für Zeichenfolgen mit dem Namen ReverseCompare
definiert, der die IComparer<string>
generische Schnittstelle (IComparer(Of String)
in Visual Basic, IComparer<String^>
in Visual C++) implementiert. Der Comparer ruft die CompareTo(String) -Methode auf, wobei die Reihenfolge der Vergleiche umgekehrt wird, sodass die Zeichenfolgen hoch nach niedrig statt niedrig nach hoch sortieren.
Das Codebeispiel erstellt und zeigt ein Array von Dinosauriernamen an, bestehend aus drei Pflanzenfressern, gefolgt von drei Fleischfressern (Tyrannosauriden, um genau zu sein). Die Sort<T>(T[], Int32, Int32) generische Methodenüberladung wird verwendet, um die letzten drei Elemente des Arrays zu sortieren, die dann angezeigt wird. Die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) generische Methodenüberladung wird mit ReverseCompare
verwendet, um die letzten drei Elemente in umgekehrter Reihenfolge zu sortieren. Die gründlich verwirrten Dinosaurier werden wieder angezeigt.
Hinweis
Die Aufrufe der Sort<T>(T[], IComparer<T>) generischen Methoden und BinarySearch<T>(T[], T, IComparer<T>) unterscheiden sich nicht von Aufrufen ihrer nicht generischen Entsprechungen, da Visual Basic, C# und C++ den Typ des generischen Typparameters vom Typ des ersten Arguments ableiten. Wenn Sie die Ildasm.exe (IL Disassembler) verwenden, um die Microsoft Intermediate Language (MSIL) zu untersuchen, können Sie sehen, dass die generischen Methoden aufgerufen werden.
using namespace System;
using namespace System::Collections::Generic;
public ref class ReverseComparer: IComparer<String^>
{
public:
virtual int Compare(String^ x, String^ y)
{
// Compare y and x in reverse order.
return y->CompareTo(x);
}
};
void main()
{
array<String^>^ dinosaurs = {"Pachycephalosaurus",
"Amargasaurus",
"Mamenchisaurus",
"Tarbosaurus",
"Tyrannosaurus",
"Albertasaurus"};
Console::WriteLine();
for each(String^ dinosaur in dinosaurs)
{
Console::WriteLine(dinosaur);
}
Console::WriteLine("\nSort(dinosaurs, 3, 3)");
Array::Sort(dinosaurs, 3, 3);
Console::WriteLine();
for each(String^ dinosaur in dinosaurs)
{
Console::WriteLine(dinosaur);
}
ReverseComparer^ rc = gcnew ReverseComparer();
Console::WriteLine("\nSort(dinosaurs, 3, 3, rc)");
Array::Sort(dinosaurs, 3, 3, rc);
Console::WriteLine();
for each(String^ dinosaur in dinosaurs)
{
Console::WriteLine(dinosaur);
}
}
/* This code example produces the following output:
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Tarbosaurus
Tyrannosaurus
Albertasaurus
Sort(dinosaurs, 3, 3)
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Albertasaurus
Tarbosaurus
Tyrannosaurus
Sort(dinosaurs, 3, 3, rc)
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Tyrannosaurus
Tarbosaurus
Albertasaurus
*/
using System;
using System.Collections.Generic;
public class ReverseComparer: IComparer<string>
{
public int Compare(string x, string y)
{
// Compare y and x in reverse order.
return y.CompareTo(x);
}
}
public class Example
{
public static void Main()
{
string[] dinosaurs = {"Pachycephalosaurus",
"Amargasaurus",
"Mamenchisaurus",
"Tarbosaurus",
"Tyrannosaurus",
"Albertasaurus"};
Console.WriteLine();
foreach( string dinosaur in dinosaurs )
{
Console.WriteLine(dinosaur);
}
Console.WriteLine("\nSort(dinosaurs, 3, 3)");
Array.Sort(dinosaurs, 3, 3);
Console.WriteLine();
foreach( string dinosaur in dinosaurs )
{
Console.WriteLine(dinosaur);
}
ReverseComparer rc = new ReverseComparer();
Console.WriteLine("\nSort(dinosaurs, 3, 3, rc)");
Array.Sort(dinosaurs, 3, 3, rc);
Console.WriteLine();
foreach( string dinosaur in dinosaurs )
{
Console.WriteLine(dinosaur);
}
}
}
/* This code example produces the following output:
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Tarbosaurus
Tyrannosaurus
Albertasaurus
Sort(dinosaurs, 3, 3)
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Albertasaurus
Tarbosaurus
Tyrannosaurus
Sort(dinosaurs, 3, 3, rc)
Pachycephalosaurus
Amargasaurus
Mamenchisaurus
Tyrannosaurus
Tarbosaurus
Albertasaurus
*/
open System
open System.Collections.Generic
type ReverseComparer() =
interface IComparer<string> with
member _.Compare(x, y) =
y.CompareTo x
let dinosaurs =
[| "Pachycephalosaurus"
"Amargasaurus"
"Mamenchisaurus"
"Tarbosaurus"
"Tyrannosaurus"
"Albertasaurus" |]
printfn ""
for dino in dinosaurs do
printfn $"{dino}"
printfn "\nSort(dinosaurs, 3, 3)"
Array.Sort(dinosaurs, 3, 3)
printfn ""
for dino in dinosaurs do
printfn $"{dino}"
let rc = ReverseComparer()
printfn "\nSort(dinosaurs, 3, 3, rc)"
Array.Sort(dinosaurs, 3, 3, rc)
printfn ""
for dino in dinosaurs do
printfn $"{dino}"
// This code example produces the following output:
//
// Pachycephalosaurus
// Amargasaurus
// Mamenchisaurus
// Tarbosaurus
// Tyrannosaurus
// Albertasaurus
//
// Sort(dinosaurs, 3, 3)
//
// Pachycephalosaurus
// Amargasaurus
// Mamenchisaurus
// Albertasaurus
// Tarbosaurus
// Tyrannosaurus
//
// Sort(dinosaurs, 3, 3, rc)
//
// Pachycephalosaurus
// Amargasaurus
// Mamenchisaurus
// Tyrannosaurus
// Tarbosaurus
// Albertasaurus
Imports System.Collections.Generic
Public Class ReverseComparer
Implements IComparer(Of String)
Public Function Compare(ByVal x As String, _
ByVal y As String) As Integer _
Implements IComparer(Of String).Compare
' Compare y and x in reverse order.
Return y.CompareTo(x)
End Function
End Class
Public Class Example
Public Shared Sub Main()
Dim dinosaurs() As String = { _
"Pachycephalosaurus", _
"Amargasaurus", _
"Mamenchisaurus", _
"Tarbosaurus", _
"Tyrannosaurus", _
"Albertasaurus" }
Console.WriteLine()
For Each dinosaur As String In dinosaurs
Console.WriteLine(dinosaur)
Next
Console.WriteLine(vbLf & "Sort(dinosaurs, 3, 3)")
Array.Sort(dinosaurs, 3, 3)
Console.WriteLine()
For Each dinosaur As String In dinosaurs
Console.WriteLine(dinosaur)
Next
Dim rc As New ReverseComparer()
Console.WriteLine(vbLf & "Sort(dinosaurs, 3, 3, rc)")
Array.Sort(dinosaurs, 3, 3, rc)
Console.WriteLine()
For Each dinosaur As String In dinosaurs
Console.WriteLine(dinosaur)
Next
End Sub
End Class
' This code example produces the following output:
'
'Pachycephalosaurus
'Amargasaurus
'Mamenchisaurus
'Tarbosaurus
'Tyrannosaurus
'Albertasaurus
'
'Sort(dinosaurs, 3, 3)
'
'Pachycephalosaurus
'Amargasaurus
'Mamenchisaurus
'Albertasaurus
'Tarbosaurus
'Tyrannosaurus
'
'Sort(dinosaurs, 3, 3, rc)
'
'Pachycephalosaurus
'Amargasaurus
'Mamenchisaurus
'Tyrannosaurus
'Tarbosaurus
'Albertasaurus
Hinweise
Wenn comparer
ist null
, muss jedes Element innerhalb des angegebenen Elementbereichs in array
die IComparable<T> generische Schnittstelle implementieren, um Vergleiche mit jedem anderen Element in durchführen array
zu können.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner als oder gleich 16 Elementen ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der elemente bei, die gleich sind.
Diese Methode ist ein O(n
log n
) -Vorgang, wobei n
ist length
.
Hinweise für Aufrufer
.NET Framework 4 und früheren Versionen wurde nur der Quicksort-Algorithmus verwendet. Quicksort identifiziert ungültige Vergleiche in einigen Situationen, in denen der Sortiervorgang eine IndexOutOfRangeException Ausnahme auslöst, und löst eine ArgumentException Ausnahme für den Aufrufer aus. Ab .NET Framework 4.5 ist es möglich, dass sortiervorgänge, die zuvor ausgelöst ArgumentException wurden, keine Ausnahme auslösen, da die Einfügungssortierungs- und Heapsortalgorithmen keinen ungültigen Vergleich erkennen. Dies gilt in den meisten Fällen für Arrays mit weniger als oder gleich 16 Elementen.
Weitere Informationen
- IComparer<T>
- IComparable<T>
- BinarySearch
- Durchführen kulturunabhängiger Zeichenfolgenoperationen in Arrays
Gilt für:
Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert einen Bereich von Elementen in einem Paar von Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die angegebene generische IComparer<T>-Schnittstelle.
public:
generic <typename TKey, typename TValue>
static void Sort(cli::array <TKey> ^ keys, cli::array <TValue> ^ items, int index, int length, System::Collections::Generic::IComparer<TKey> ^ comparer);
public static void Sort<TKey,TValue> (TKey[] keys, TValue[] items, int index, int length, System.Collections.Generic.IComparer<TKey> comparer);
public static void Sort<TKey,TValue> (TKey[] keys, TValue[]? items, int index, int length, System.Collections.Generic.IComparer<TKey>? comparer);
static member Sort : 'Key[] * 'Value[] * int * int * System.Collections.Generic.IComparer<'Key> -> unit
Public Shared Sub Sort(Of TKey, TValue) (keys As TKey(), items As TValue(), index As Integer, length As Integer, comparer As IComparer(Of TKey))
Typparameter
- TKey
Der Typ der Elemente des Schlüsselarrays.
- TValue
Der Typ der Elemente des Elementarrays.
Parameter
- keys
- TKey[]
Das eindimensionale nullbasierte Array mit den zu sortierenden Schlüsseln.
- items
- TValue[]
Das eindimensionale nullbasierte Array, das die den Schlüsseln in keys
entsprechenden Elemente enthält, oder null
, um nur keys
zu sortieren.
- index
- Int32
Der Startindex des zu sortierenden Bereichs.
- length
- Int32
Die Anzahl der Elemente im zu sortierenden Bereich.
- comparer
- IComparer<TKey>
Die Implementierung der generischen IComparer<T>-Schnittstelle, die für den Vergleich von Elementen verwendet werden soll, oder null
, um die Implementierung der generischen IComparable<T>-Schnittstelle der einzelnen Elemente zu verwenden.
Ausnahmen
keys
ist null
.
index
ist kleiner als die untere keys
-Grenze.
- oder -
length
ist kleiner als Null.
items
ist nicht null
, und die Untergrenze von keys
entspricht nicht der Untergrenze von items
.
- oder -
items
ist nicht null
, und die Länge von keys
ist größer als die Länge von items
.
- oder -
index
und length
geben keinen gültigen Bereich im keys
Array an.
- oder -
items
ist nicht null
, und index
und length
geben keinen gültigen Bereich im items
Array an.
- oder -
Die Implementierung von comparer
hat einen Fehler während der Sortierung verursacht. Beispielsweise gibt comparer
beim Vergleichen eines Elements mit sich selbst möglicherweise nicht 0 zurück.
comparer
ist null
, und in einem oder mehreren Elementen in keys
Array ist die generische IComparable<T>-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Codebeispiel werden die Sort<TKey,TValue>(TKey[], TValue[])generischen Methodenüberladungen , Sort<TKey,TValue>(TKey[], TValue[], IComparer<TKey>), Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32)und Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) zum Sortieren von Arraypaaren veranschaulicht, die Schlüssel und Werte darstellen.
Im Codebeispiel wird ein alternativer Vergleich für Zeichenfolgen mit dem Namen ReverseCompare
definiert, der die IComparer<string>
generische Schnittstelle (IComparer(Of String)
in Visual Basic, IComparer<String^>
in Visual C++) implementiert. Der Comparer ruft die CompareTo(String) -Methode auf, wobei die Reihenfolge der Vergleiche umgekehrt wird, sodass die Zeichenfolgen hoch nach niedrig statt niedrig nach hoch sortieren.
Das Codebeispiel erstellt und zeigt ein Array von Dinosauriernamen (die Schlüssel) und ein Array von ganzen Zahlen an, die die maximale Länge jedes Dinosauriers in Metern (die Werte) darstellen. Die Arrays werden dann mehrmals sortiert und angezeigt:
Die Sort<TKey,TValue>(TKey[], TValue[]) Überladung wird verwendet, um beide Arrays in der Reihenfolge der Dinosauriernamen im ersten Array zu sortieren.
Die Sort<TKey,TValue>(TKey[], TValue[], IComparer<TKey>) Überladung und ein instance von
ReverseCompare
werden verwendet, um die Sortierreihenfolge der gekoppelten Arrays umzukehren.Die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32) Überladung wird verwendet, um die letzten drei Elemente beider Arrays zu sortieren.
Die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) Überladung wird verwendet, um die letzten drei Elemente beider Arrays in umgekehrter Reihenfolge zu sortieren.
Hinweis
Die Aufrufe der generischen Methoden unterscheiden sich nicht von Aufrufen ihrer nichtgenerischen Entsprechungen, da Visual Basic, C# und C++ den Typ des generischen Typparameters vom Typ der ersten beiden Argumente ableiten. Wenn Sie die Ildasm.exe (IL Disassembler) verwenden, um die Microsoft Intermediate Language (MSIL) zu untersuchen, können Sie sehen, dass die generischen Methoden aufgerufen werden.
using namespace System;
using namespace System::Collections::Generic;
public ref class ReverseComparer: IComparer<String^>
{
public:
virtual int Compare(String^ x, String^ y)
{
// Compare y and x in reverse order.
return y->CompareTo(x);
}
};
void main()
{
array<String^>^ dinosaurs = {
"Seismosaurus",
"Chasmosaurus",
"Coelophysis",
"Mamenchisaurus",
"Caudipteryx",
"Cetiosaurus" };
array<int>^ dinosaurSizes = { 40, 5, 3, 22, 1, 18 };
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes)");
Array::Sort(dinosaurs, dinosaurSizes);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
ReverseComparer^ rc = gcnew ReverseComparer();
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, rc)");
Array::Sort(dinosaurs, dinosaurSizes, rc);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3)");
Array::Sort(dinosaurs, dinosaurSizes, 3, 3);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)");
Array::Sort(dinosaurs, dinosaurSizes, 3, 3, rc);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
}
/* This code example produces the following output:
Seismosaurus: up to 40 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Sort(dinosaurs, dinosaurSizes)
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Seismosaurus: up to 40 meters long.
Sort(dinosaurs, dinosaurSizes, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
*/
using System;
using System.Collections.Generic;
public class ReverseComparer: IComparer<string>
{
public int Compare(string x, string y)
{
// Compare y and x in reverse order.
return y.CompareTo(x);
}
}
public class Example
{
public static void Main()
{
string[] dinosaurs = {
"Seismosaurus",
"Chasmosaurus",
"Coelophysis",
"Mamenchisaurus",
"Caudipteryx",
"Cetiosaurus" };
int[] dinosaurSizes = { 40, 5, 3, 22, 1, 18 };
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes)");
Array.Sort(dinosaurs, dinosaurSizes);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
ReverseComparer rc = new ReverseComparer();
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, rc)");
Array.Sort(dinosaurs, dinosaurSizes, rc);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3)");
Array.Sort(dinosaurs, dinosaurSizes, 3, 3);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)");
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
}
}
/* This code example produces the following output:
Seismosaurus: up to 40 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Sort(dinosaurs, dinosaurSizes)
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Seismosaurus: up to 40 meters long.
Sort(dinosaurs, dinosaurSizes, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
*/
open System
open System.Collections.Generic
type ReverseComparer() =
interface IComparer<string> with
member _.Compare(x, y) =
y.CompareTo x
let dinosaurs =
[| "Seismosaurus"
"Chasmosaurus"
"Coelophysis"
"Mamenchisaurus"
"Caudipteryx"
"Cetiosaurus" |]
let dinosaurSizes = [| 40; 5; 3; 22; 1; 18 |]
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes)"
Array.Sort(dinosaurs, dinosaurSizes)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
let rc = ReverseComparer()
printfn "\nSort(dinosaurs, dinosaurSizes, rc)"
Array.Sort(dinosaurs, dinosaurSizes, rc)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes, 3, 3)"
Array.Sort(dinosaurs, dinosaurSizes, 3, 3)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)"
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
// This code example produces the following output:
//
// Seismosaurus: up to 40 meters long.
// Chasmosaurus: up to 5 meters long.
// Coelophysis: up to 3 meters long.
// Mamenchisaurus: up to 22 meters long.
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
//
// Sort(dinosaurs, dinosaurSizes)
//
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
// Chasmosaurus: up to 5 meters long.
// Coelophysis: up to 3 meters long.
// Mamenchisaurus: up to 22 meters long.
// Seismosaurus: up to 40 meters long.
//
// Sort(dinosaurs, dinosaurSizes, rc)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Chasmosaurus: up to 5 meters long.
// Cetiosaurus: up to 18 meters long.
// Caudipteryx: up to 1 meters long.
//
// Sort(dinosaurs, dinosaurSizes, 3, 3)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
// Chasmosaurus: up to 5 meters long.
//
// Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Chasmosaurus: up to 5 meters long.
// Cetiosaurus: up to 18 meters long.
// Caudipteryx: up to 1 meters long.
Imports System.Collections.Generic
Public Class ReverseComparer
Implements IComparer(Of String)
Public Function Compare(ByVal x As String, _
ByVal y As String) As Integer _
Implements IComparer(Of String).Compare
' Compare y and x in reverse order.
Return y.CompareTo(x)
End Function
End Class
Public Class Example
Public Shared Sub Main()
Dim dinosaurs() As String = { _
"Seismosaurus", _
"Chasmosaurus", _
"Coelophysis", _
"Mamenchisaurus", _
"Caudipteryx", _
"Cetiosaurus" }
Dim dinosaurSizes() As Integer = { 40, 5, 3, 22, 1, 18 }
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes)")
Array.Sort(dinosaurs, dinosaurSizes)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Dim rc As New ReverseComparer()
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, rc)")
Array.Sort(dinosaurs, dinosaurSizes, rc)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, 3, 3)")
Array.Sort(dinosaurs, dinosaurSizes, 3, 3)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, 3, 3, rc)")
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
End Sub
End Class
' This code example produces the following output:
'
'Seismosaurus: up to 40 meters long.
'Chasmosaurus: up to 5 meters long.
'Coelophysis: up to 3 meters long.
'Mamenchisaurus: up to 22 meters long.
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'
'Sort(dinosaurs, dinosaurSizes)
'
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'Chasmosaurus: up to 5 meters long.
'Coelophysis: up to 3 meters long.
'Mamenchisaurus: up to 22 meters long.
'Seismosaurus: up to 40 meters long.
'
'Sort(dinosaurs, dinosaurSizes, rc)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Chasmosaurus: up to 5 meters long.
'Cetiosaurus: up to 18 meters long.
'Caudipteryx: up to 1 meters long.
'
'Sort(dinosaurs, dinosaurSizes, 3, 3)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'Chasmosaurus: up to 5 meters long.
'
'Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Chasmosaurus: up to 5 meters long.
'Cetiosaurus: up to 18 meters long.
'Caudipteryx: up to 1 meters long.
Hinweise
Jeder Schlüssel in verfügt keys
Array über ein entsprechendes Element im items
Array. Wenn ein Schlüssel während der Sortierung neu positioniert wird, wird das entsprechende Element in der items
Array ähnlich neu positioniert. Daher wird der items
Array nach der Anordnung der entsprechenden Schlüssel im keys
Arraysortiert.
Wenn comparer
ist null
, muss jeder Schlüssel innerhalb des angegebenen Bereichs von Elementen in die keys
ArrayIComparable<T> generische Schnittstelle implementieren, um Vergleiche mit jedem anderen Schlüssel durchführen zu können.
Sie können sortieren, wenn es mehr Elemente als Schlüssel gibt, aber die Elemente, die keine entsprechenden Schlüssel haben, werden nicht sortiert. Sie können nicht sortieren, wenn mehr Schlüssel als Elemente vorhanden sind. Dadurch wird ein ArgumentExceptionausgelöst.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner oder gleich 16 Elemente ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der Elemente bei, die gleich sind.
Bei dieser Methode handelt es sich um einen O(n
log n
)-Vorgang, wobei n
ist length
.
Hinweise für Aufrufer
.NET Framework 4 und früheren Versionen wurde nur der Quicksort-Algorithmus verwendet. Quicksort identifiziert ungültige Vergleiche in einigen Situationen, in denen der Sortiervorgang eine IndexOutOfRangeException Ausnahme auslöst, und löst eine ArgumentException Ausnahme für den Aufrufer aus. Ab .NET Framework 4.5 ist es möglich, dass sortiervorgänge, die zuvor ausgelöst ArgumentException wurden, keine Ausnahme auslösen, da die Einfügungssortierungs- und Heapsortalgorithmen keinen ungültigen Vergleich erkennen. Dies gilt in den meisten Fällen für Arrays mit weniger als oder gleich 16 Elementen.
Weitere Informationen
- IComparer<T>
- IComparable<T>
- BinarySearch
- Durchführen kulturunabhängiger Zeichenfolgenoperationen in Arrays
Gilt für:
Sort<TKey,TValue>(TKey[], TValue[])
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert ein Paar von Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die Implementierung der generischen IComparable<T>-Schnittstelle jedes Schlüssels.
public:
generic <typename TKey, typename TValue>
static void Sort(cli::array <TKey> ^ keys, cli::array <TValue> ^ items);
public static void Sort<TKey,TValue> (TKey[] keys, TValue[] items);
public static void Sort<TKey,TValue> (TKey[] keys, TValue[]? items);
static member Sort : 'Key[] * 'Value[] -> unit
Public Shared Sub Sort(Of TKey, TValue) (keys As TKey(), items As TValue())
Typparameter
- TKey
Der Typ der Elemente des Schlüsselarrays.
- TValue
Der Typ der Elemente des Elementarrays.
Parameter
- keys
- TKey[]
Das eindimensionale nullbasierte Array mit den zu sortierenden Schlüsseln.
- items
- TValue[]
Das eindimensionale nullbasierte Array, das die den Schlüsseln in keys
entsprechenden Elemente enthält, oder null
, um nur keys
zu sortieren.
Ausnahmen
keys
ist null
.
items
ist nicht null
, und die Untergrenze von keys
entspricht nicht der Untergrenze von items
.
- oder -
items
ist nicht null
, und die Länge von keys
ist größer als die Länge von items
.
In einem oder mehreren Elementen im keys
Array ist die generische IComparable<T>-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Codebeispiel werden die Sort<TKey,TValue>(TKey[], TValue[])generischen Methodenüberladungen , Sort<TKey,TValue>(TKey[], TValue[], IComparer<TKey>), Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32)und Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) zum Sortieren von Arraypaaren veranschaulicht, die Schlüssel und Werte darstellen.
Im Codebeispiel wird ein alternativer Vergleich für Zeichenfolgen mit dem Namen ReverseCompare
definiert, der die IComparer<string>
generische Schnittstelle (IComparer(Of String)
in Visual Basic in IComparer<String^>
Visual C++) implementiert. Der Comparer ruft die CompareTo(String) -Methode auf, wobei die Reihenfolge der Vergleiche umgekehrt wird, sodass die Zeichenfolgen hoch nach niedrig statt niedrig nach hoch sortieren.
Das Codebeispiel erstellt und zeigt ein Array von Dinosauriernamen (die Schlüssel) und ein Array von ganzen Zahlen an, die die maximale Länge jedes Dinosauriers in Metern (die Werte) darstellen. Die Arrays werden dann mehrmals sortiert und angezeigt:
Die Sort<TKey,TValue>(TKey[], TValue[]) Überladung wird verwendet, um beide Arrays in der Reihenfolge der Dinosauriernamen im ersten Array zu sortieren.
Die Sort<TKey,TValue>(TKey[], TValue[], IComparer<TKey>) Überladung und ein instance von
ReverseCompare
werden verwendet, um die Sortierreihenfolge der gekoppelten Arrays umzukehren.Die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32) Überladung wird verwendet, um die letzten drei Elemente beider Arrays zu sortieren.
Die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) Überladung wird verwendet, um die letzten drei Elemente beider Arrays in umgekehrter Reihenfolge zu sortieren.
Hinweis
Die Aufrufe der generischen Methoden unterscheiden sich nicht von Aufrufen ihrer nichtgenerischen Entsprechungen, da Visual Basic, C# und C++ den Typ des generischen Typparameters vom Typ der ersten beiden Argumente ableiten. Wenn Sie die Ildasm.exe (IL Disassembler) verwenden, um die Microsoft Intermediate Language (MSIL) zu untersuchen, können Sie sehen, dass die generischen Methoden aufgerufen werden.
using namespace System;
using namespace System::Collections::Generic;
public ref class ReverseComparer: IComparer<String^>
{
public:
virtual int Compare(String^ x, String^ y)
{
// Compare y and x in reverse order.
return y->CompareTo(x);
}
};
void main()
{
array<String^>^ dinosaurs = {
"Seismosaurus",
"Chasmosaurus",
"Coelophysis",
"Mamenchisaurus",
"Caudipteryx",
"Cetiosaurus" };
array<int>^ dinosaurSizes = { 40, 5, 3, 22, 1, 18 };
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes)");
Array::Sort(dinosaurs, dinosaurSizes);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
ReverseComparer^ rc = gcnew ReverseComparer();
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, rc)");
Array::Sort(dinosaurs, dinosaurSizes, rc);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3)");
Array::Sort(dinosaurs, dinosaurSizes, 3, 3);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)");
Array::Sort(dinosaurs, dinosaurSizes, 3, 3, rc);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
}
/* This code example produces the following output:
Seismosaurus: up to 40 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Sort(dinosaurs, dinosaurSizes)
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Seismosaurus: up to 40 meters long.
Sort(dinosaurs, dinosaurSizes, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
*/
using System;
using System.Collections.Generic;
public class ReverseComparer: IComparer<string>
{
public int Compare(string x, string y)
{
// Compare y and x in reverse order.
return y.CompareTo(x);
}
}
public class Example
{
public static void Main()
{
string[] dinosaurs = {
"Seismosaurus",
"Chasmosaurus",
"Coelophysis",
"Mamenchisaurus",
"Caudipteryx",
"Cetiosaurus" };
int[] dinosaurSizes = { 40, 5, 3, 22, 1, 18 };
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes)");
Array.Sort(dinosaurs, dinosaurSizes);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
ReverseComparer rc = new ReverseComparer();
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, rc)");
Array.Sort(dinosaurs, dinosaurSizes, rc);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3)");
Array.Sort(dinosaurs, dinosaurSizes, 3, 3);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)");
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
}
}
/* This code example produces the following output:
Seismosaurus: up to 40 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Sort(dinosaurs, dinosaurSizes)
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Seismosaurus: up to 40 meters long.
Sort(dinosaurs, dinosaurSizes, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
*/
open System
open System.Collections.Generic
type ReverseComparer() =
interface IComparer<string> with
member _.Compare(x, y) =
y.CompareTo x
let dinosaurs =
[| "Seismosaurus"
"Chasmosaurus"
"Coelophysis"
"Mamenchisaurus"
"Caudipteryx"
"Cetiosaurus" |]
let dinosaurSizes = [| 40; 5; 3; 22; 1; 18 |]
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes)"
Array.Sort(dinosaurs, dinosaurSizes)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
let rc = ReverseComparer()
printfn "\nSort(dinosaurs, dinosaurSizes, rc)"
Array.Sort(dinosaurs, dinosaurSizes, rc)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes, 3, 3)"
Array.Sort(dinosaurs, dinosaurSizes, 3, 3)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)"
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
// This code example produces the following output:
//
// Seismosaurus: up to 40 meters long.
// Chasmosaurus: up to 5 meters long.
// Coelophysis: up to 3 meters long.
// Mamenchisaurus: up to 22 meters long.
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
//
// Sort(dinosaurs, dinosaurSizes)
//
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
// Chasmosaurus: up to 5 meters long.
// Coelophysis: up to 3 meters long.
// Mamenchisaurus: up to 22 meters long.
// Seismosaurus: up to 40 meters long.
//
// Sort(dinosaurs, dinosaurSizes, rc)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Chasmosaurus: up to 5 meters long.
// Cetiosaurus: up to 18 meters long.
// Caudipteryx: up to 1 meters long.
//
// Sort(dinosaurs, dinosaurSizes, 3, 3)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
// Chasmosaurus: up to 5 meters long.
//
// Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Chasmosaurus: up to 5 meters long.
// Cetiosaurus: up to 18 meters long.
// Caudipteryx: up to 1 meters long.
Imports System.Collections.Generic
Public Class ReverseComparer
Implements IComparer(Of String)
Public Function Compare(ByVal x As String, _
ByVal y As String) As Integer _
Implements IComparer(Of String).Compare
' Compare y and x in reverse order.
Return y.CompareTo(x)
End Function
End Class
Public Class Example
Public Shared Sub Main()
Dim dinosaurs() As String = { _
"Seismosaurus", _
"Chasmosaurus", _
"Coelophysis", _
"Mamenchisaurus", _
"Caudipteryx", _
"Cetiosaurus" }
Dim dinosaurSizes() As Integer = { 40, 5, 3, 22, 1, 18 }
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes)")
Array.Sort(dinosaurs, dinosaurSizes)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Dim rc As New ReverseComparer()
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, rc)")
Array.Sort(dinosaurs, dinosaurSizes, rc)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, 3, 3)")
Array.Sort(dinosaurs, dinosaurSizes, 3, 3)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, 3, 3, rc)")
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
End Sub
End Class
' This code example produces the following output:
'
'Seismosaurus: up to 40 meters long.
'Chasmosaurus: up to 5 meters long.
'Coelophysis: up to 3 meters long.
'Mamenchisaurus: up to 22 meters long.
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'
'Sort(dinosaurs, dinosaurSizes)
'
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'Chasmosaurus: up to 5 meters long.
'Coelophysis: up to 3 meters long.
'Mamenchisaurus: up to 22 meters long.
'Seismosaurus: up to 40 meters long.
'
'Sort(dinosaurs, dinosaurSizes, rc)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Chasmosaurus: up to 5 meters long.
'Cetiosaurus: up to 18 meters long.
'Caudipteryx: up to 1 meters long.
'
'Sort(dinosaurs, dinosaurSizes, 3, 3)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'Chasmosaurus: up to 5 meters long.
'
'Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Chasmosaurus: up to 5 meters long.
'Cetiosaurus: up to 18 meters long.
'Caudipteryx: up to 1 meters long.
Hinweise
Jeder Schlüssel in verfügt keys
Array über ein entsprechendes Element im items
Array. Wenn ein Schlüssel während der Sortierung neu positioniert wird, wird das entsprechende Element in der items
Array ähnlich neu positioniert. Daher wird der items
Array nach der Anordnung der entsprechenden Schlüssel im keys
Arraysortiert.
Jeder Schlüssel in muss keys
Array die IComparable<T> generische Schnittstelle implementieren, um Vergleiche mit jedem anderen Schlüssel durchführen zu können.
Sie können sortieren, wenn es mehr Elemente als Schlüssel gibt, aber die Elemente, die keine entsprechenden Schlüssel haben, werden nicht sortiert. Sie können nicht sortieren, wenn mehr Schlüssel als Elemente vorhanden sind. Dadurch wird ein ArgumentExceptionausgelöst.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner oder gleich 16 Elemente ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der Elemente bei, die gleich sind.
Bei dieser Methode handelt es sich um einen O(n
log n
)-Vorgang, wobei n
der Length von array
ist.
Weitere Informationen
- IComparable<T>
- BinarySearch
- IDictionary<TKey,TValue>
- Durchführen kulturunabhängiger Zeichenfolgenoperationen in Arrays
Gilt für:
Sort<TKey,TValue>(TKey[], TValue[], IComparer<TKey>)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert ein Paar von Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die angegebene generische IComparer<T>-Schnittstelle.
public:
generic <typename TKey, typename TValue>
static void Sort(cli::array <TKey> ^ keys, cli::array <TValue> ^ items, System::Collections::Generic::IComparer<TKey> ^ comparer);
public static void Sort<TKey,TValue> (TKey[] keys, TValue[] items, System.Collections.Generic.IComparer<TKey> comparer);
public static void Sort<TKey,TValue> (TKey[] keys, TValue[]? items, System.Collections.Generic.IComparer<TKey>? comparer);
static member Sort : 'Key[] * 'Value[] * System.Collections.Generic.IComparer<'Key> -> unit
Public Shared Sub Sort(Of TKey, TValue) (keys As TKey(), items As TValue(), comparer As IComparer(Of TKey))
Typparameter
- TKey
Der Typ der Elemente des Schlüsselarrays.
- TValue
Der Typ der Elemente des Elementarrays.
Parameter
- keys
- TKey[]
Das eindimensionale nullbasierte Array mit den zu sortierenden Schlüsseln.
- items
- TValue[]
Das eindimensionale nullbasierte Array, das die den Schlüsseln in keys
entsprechenden Elemente enthält, oder null
, um nur keys
zu sortieren.
- comparer
- IComparer<TKey>
Die Implementierung der generischen IComparer<T>-Schnittstelle, die für den Vergleich von Elementen verwendet werden soll, oder null
, um die Implementierung der generischen IComparable<T>-Schnittstelle der einzelnen Elemente zu verwenden.
Ausnahmen
keys
ist null
.
items
ist nicht null
, und die Untergrenze von keys
entspricht nicht der Untergrenze von items
.
- oder -
items
ist nicht null
, und die Länge von keys
ist größer als die Länge von items
.
- oder -
Die Implementierung von comparer
hat einen Fehler während der Sortierung verursacht. Beispielsweise gibt comparer
beim Vergleichen eines Elements mit sich selbst möglicherweise nicht 0 zurück.
comparer
ist null
, und in einem oder mehreren Elementen in keys
Array ist die generische IComparable<T>-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Codebeispiel werden die Sort<TKey,TValue>(TKey[], TValue[])generischen Methodenüberladungen , [], Sort<TKey,TValue>(TKey[], TValue[], IComparer<TKey>), Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32)und Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) zum Sortieren von Arraypaaren veranschaulicht, die Schlüssel und Werte darstellen.
Im Codebeispiel wird ein alternativer Vergleich für Zeichenfolgen mit dem Namen ReverseCompare
definiert, der die IComparer<string>
generische Schnittstelle (IComparer(Of String)
in Visual Basic in IComparer<String^>
Visual C++) implementiert. Der Comparer ruft die CompareTo(String) -Methode auf, wobei die Reihenfolge der Vergleiche umgekehrt wird, sodass die Zeichenfolgen hoch nach niedrig statt niedrig nach hoch sortieren.
Das Codebeispiel erstellt und zeigt ein Array von Dinosauriernamen (die Schlüssel) und ein Array von ganzen Zahlen an, die die maximale Länge jedes Dinosauriers in Metern (die Werte) darstellen. Die Arrays werden dann mehrmals sortiert und angezeigt:
Die Sort<TKey,TValue>(TKey[], TValue[]) Überladung wird verwendet, um beide Arrays in der Reihenfolge der Dinosauriernamen im ersten Array zu sortieren.
Die Sort<TKey,TValue>(TKey[], TValue[], IComparer<TKey>) Überladung und ein instance von
ReverseCompare
werden verwendet, um die Sortierreihenfolge der gekoppelten Arrays umzukehren.Die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32) Überladung wird verwendet, um die letzten drei Elemente beider Arrays zu sortieren.
Die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) Überladung wird verwendet, um die letzten drei Elemente beider Arrays in umgekehrter Reihenfolge zu sortieren.
Hinweis
Die Aufrufe der generischen Methoden unterscheiden sich nicht von Aufrufen ihrer nichtgenerischen Entsprechungen, da Visual Basic, C# und C++ den Typ des generischen Typparameters vom Typ der ersten beiden Argumente ableiten. Wenn Sie die Ildasm.exe (IL Disassembler) verwenden, um die Microsoft Intermediate Language (MSIL) zu untersuchen, können Sie sehen, dass die generischen Methoden aufgerufen werden.
using namespace System;
using namespace System::Collections::Generic;
public ref class ReverseComparer: IComparer<String^>
{
public:
virtual int Compare(String^ x, String^ y)
{
// Compare y and x in reverse order.
return y->CompareTo(x);
}
};
void main()
{
array<String^>^ dinosaurs = {
"Seismosaurus",
"Chasmosaurus",
"Coelophysis",
"Mamenchisaurus",
"Caudipteryx",
"Cetiosaurus" };
array<int>^ dinosaurSizes = { 40, 5, 3, 22, 1, 18 };
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes)");
Array::Sort(dinosaurs, dinosaurSizes);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
ReverseComparer^ rc = gcnew ReverseComparer();
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, rc)");
Array::Sort(dinosaurs, dinosaurSizes, rc);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3)");
Array::Sort(dinosaurs, dinosaurSizes, 3, 3);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)");
Array::Sort(dinosaurs, dinosaurSizes, 3, 3, rc);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
}
/* This code example produces the following output:
Seismosaurus: up to 40 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Sort(dinosaurs, dinosaurSizes)
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Seismosaurus: up to 40 meters long.
Sort(dinosaurs, dinosaurSizes, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
*/
using System;
using System.Collections.Generic;
public class ReverseComparer: IComparer<string>
{
public int Compare(string x, string y)
{
// Compare y and x in reverse order.
return y.CompareTo(x);
}
}
public class Example
{
public static void Main()
{
string[] dinosaurs = {
"Seismosaurus",
"Chasmosaurus",
"Coelophysis",
"Mamenchisaurus",
"Caudipteryx",
"Cetiosaurus" };
int[] dinosaurSizes = { 40, 5, 3, 22, 1, 18 };
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes)");
Array.Sort(dinosaurs, dinosaurSizes);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
ReverseComparer rc = new ReverseComparer();
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, rc)");
Array.Sort(dinosaurs, dinosaurSizes, rc);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3)");
Array.Sort(dinosaurs, dinosaurSizes, 3, 3);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)");
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
}
}
/* This code example produces the following output:
Seismosaurus: up to 40 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Sort(dinosaurs, dinosaurSizes)
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Seismosaurus: up to 40 meters long.
Sort(dinosaurs, dinosaurSizes, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
*/
open System
open System.Collections.Generic
type ReverseComparer() =
interface IComparer<string> with
member _.Compare(x, y) =
y.CompareTo x
let dinosaurs =
[| "Seismosaurus"
"Chasmosaurus"
"Coelophysis"
"Mamenchisaurus"
"Caudipteryx"
"Cetiosaurus" |]
let dinosaurSizes = [| 40; 5; 3; 22; 1; 18 |]
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes)"
Array.Sort(dinosaurs, dinosaurSizes)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
let rc = ReverseComparer()
printfn "\nSort(dinosaurs, dinosaurSizes, rc)"
Array.Sort(dinosaurs, dinosaurSizes, rc)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes, 3, 3)"
Array.Sort(dinosaurs, dinosaurSizes, 3, 3)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)"
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
// This code example produces the following output:
//
// Seismosaurus: up to 40 meters long.
// Chasmosaurus: up to 5 meters long.
// Coelophysis: up to 3 meters long.
// Mamenchisaurus: up to 22 meters long.
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
//
// Sort(dinosaurs, dinosaurSizes)
//
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
// Chasmosaurus: up to 5 meters long.
// Coelophysis: up to 3 meters long.
// Mamenchisaurus: up to 22 meters long.
// Seismosaurus: up to 40 meters long.
//
// Sort(dinosaurs, dinosaurSizes, rc)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Chasmosaurus: up to 5 meters long.
// Cetiosaurus: up to 18 meters long.
// Caudipteryx: up to 1 meters long.
//
// Sort(dinosaurs, dinosaurSizes, 3, 3)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
// Chasmosaurus: up to 5 meters long.
//
// Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Chasmosaurus: up to 5 meters long.
// Cetiosaurus: up to 18 meters long.
// Caudipteryx: up to 1 meters long.
Imports System.Collections.Generic
Public Class ReverseComparer
Implements IComparer(Of String)
Public Function Compare(ByVal x As String, _
ByVal y As String) As Integer _
Implements IComparer(Of String).Compare
' Compare y and x in reverse order.
Return y.CompareTo(x)
End Function
End Class
Public Class Example
Public Shared Sub Main()
Dim dinosaurs() As String = { _
"Seismosaurus", _
"Chasmosaurus", _
"Coelophysis", _
"Mamenchisaurus", _
"Caudipteryx", _
"Cetiosaurus" }
Dim dinosaurSizes() As Integer = { 40, 5, 3, 22, 1, 18 }
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes)")
Array.Sort(dinosaurs, dinosaurSizes)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Dim rc As New ReverseComparer()
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, rc)")
Array.Sort(dinosaurs, dinosaurSizes, rc)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, 3, 3)")
Array.Sort(dinosaurs, dinosaurSizes, 3, 3)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, 3, 3, rc)")
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
End Sub
End Class
' This code example produces the following output:
'
'Seismosaurus: up to 40 meters long.
'Chasmosaurus: up to 5 meters long.
'Coelophysis: up to 3 meters long.
'Mamenchisaurus: up to 22 meters long.
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'
'Sort(dinosaurs, dinosaurSizes)
'
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'Chasmosaurus: up to 5 meters long.
'Coelophysis: up to 3 meters long.
'Mamenchisaurus: up to 22 meters long.
'Seismosaurus: up to 40 meters long.
'
'Sort(dinosaurs, dinosaurSizes, rc)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Chasmosaurus: up to 5 meters long.
'Cetiosaurus: up to 18 meters long.
'Caudipteryx: up to 1 meters long.
'
'Sort(dinosaurs, dinosaurSizes, 3, 3)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'Chasmosaurus: up to 5 meters long.
'
'Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Chasmosaurus: up to 5 meters long.
'Cetiosaurus: up to 18 meters long.
'Caudipteryx: up to 1 meters long.
Hinweise
Jeder Schlüssel im keys
Array verfügt über ein entsprechendes Element im items
Array. Wenn ein Schlüssel während der Sortierung neu positioniert wird, wird das entsprechende Element im items
Array auf ähnliche Weise neu positioniert. Daher wird der items
Array nach der Anordnung der entsprechenden Schlüssel im keys
Arraysortiert.
Wenn comparer
ist null
, muss jeder Schlüssel im keys
Array die IComparable<T> generische Schnittstelle implementieren, um Vergleiche mit jedem anderen Schlüssel durchführen zu können.
Sie können sortieren, wenn mehr Elemente als Schlüssel vorhanden sind, aber die Elemente, die keine entsprechenden Schlüssel haben, werden nicht sortiert. Sie können nicht sortieren, wenn mehr Schlüssel als Elemente vorhanden sind. Dadurch wird ein ArgumentExceptionausgelöst.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner als oder gleich 16 Elementen ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der elemente bei, die gleich sind.
Diese Methode ist ein O(n
log n
) -Vorgang, wobei n
der Length von array
ist.
Hinweise für Aufrufer
.NET Framework 4 und früheren Versionen wurden nur der Quicksort-Algorithmus verwendet. Quicksort identifiziert ungültige Vergleiche in einigen Situationen, in denen der Sortiervorgang eine IndexOutOfRangeException Ausnahme auslöst, und löst eine Ausnahme für den Aufrufer aus ArgumentException . Ab .NET Framework 4.5 ist es möglich, dass sortiervorgänge, die zuvor ausgelöst ArgumentException wurden, keine Ausnahme auslösen, da die Einfügesortierungs- und Heapsortalgorithmen keinen ungültigen Vergleich erkennen. Dies gilt in den meisten Fällen für Arrays mit weniger als oder gleich 16 Elementen.
Weitere Informationen
- IComparer<T>
- IComparable<T>
- BinarySearch
- Durchführen kulturunabhängiger Zeichenfolgenoperationen in Arrays
Gilt für:
Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32)
- Quelle:
- Array.cs
- Quelle:
- Array.cs
- Quelle:
- Array.cs
Sortiert einen Bereich von Elementen in einem Paar von Array-Objekten (das eine enthält die Schlüssel und das andere die entsprechenden Werte) nach den Schlüsseln im ersten Array und verwendet dabei die Implementierung der generischen IComparable<T>-Schnittstelle jedes Schlüssels.
public:
generic <typename TKey, typename TValue>
static void Sort(cli::array <TKey> ^ keys, cli::array <TValue> ^ items, int index, int length);
public static void Sort<TKey,TValue> (TKey[] keys, TValue[] items, int index, int length);
public static void Sort<TKey,TValue> (TKey[] keys, TValue[]? items, int index, int length);
static member Sort : 'Key[] * 'Value[] * int * int -> unit
Public Shared Sub Sort(Of TKey, TValue) (keys As TKey(), items As TValue(), index As Integer, length As Integer)
Typparameter
- TKey
Der Typ der Elemente des Schlüsselarrays.
- TValue
Der Typ der Elemente des Elementarrays.
Parameter
- keys
- TKey[]
Das eindimensionale nullbasierte Array mit den zu sortierenden Schlüsseln.
- items
- TValue[]
Das eindimensionale nullbasierte Array, das die den Schlüsseln in keys
entsprechenden Elemente enthält, oder null
, um nur keys
zu sortieren.
- index
- Int32
Der Startindex des zu sortierenden Bereichs.
- length
- Int32
Die Anzahl der Elemente im zu sortierenden Bereich.
Ausnahmen
keys
ist null
.
index
ist kleiner als die untere keys
-Grenze.
- oder -
length
ist kleiner als Null.
items
ist nicht null
, und die Untergrenze von keys
entspricht nicht der Untergrenze von items
.
- oder -
items
ist nicht null
, und die Länge von keys
ist größer als die Länge von items
.
- oder -
index
und length
geben keinen gültigen Bereich im keys
Array an.
- oder -
items
ist nicht null
, und index
und length
geben keinen gültigen Bereich im items
Array an.
In einem oder mehreren Elementen im keys
Array ist die generische IComparable<T>-Schnittstelle nicht implementiert.
Beispiele
Im folgenden Codebeispiel werden die Sort<TKey,TValue>(TKey[], TValue[])generischen Methodenüberladungen , Sort<TKey,TValue>(TKey[], TValue[], IComparer<TKey>), Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32)und Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) zum Sortieren von Arraypaaren veranschaulicht, die Schlüssel und Werte darstellen.
Im Codebeispiel wird ein alternativer Vergleich für Zeichenfolgen mit dem Namen ReverseCompare
definiert, der die IComparer<string>
generische Schnittstelle (IComparer(Of String)
in Visual Basic, IComparer<String^>
in Visual C++) implementiert. Der Comparer ruft die CompareTo(String) -Methode auf, wobei die Reihenfolge der Vergleiche umgekehrt wird, sodass die Zeichenfolgen hoch nach niedrig statt niedrig nach hoch sortieren.
Das Codebeispiel erstellt und zeigt ein Array von Dinosauriernamen (die Schlüssel) und ein Array von ganzen Zahlen an, die die maximale Länge jedes Dinosauriers in Metern (die Werte) darstellen. Die Arrays werden dann mehrmals sortiert und angezeigt:
Die Sort<TKey,TValue>(TKey[], TValue[]) Überladung wird verwendet, um beide Arrays in der Reihenfolge der Dinosauriernamen im ersten Array zu sortieren.
Die Sort<TKey,TValue>(TKey[], TValue[], IComparer<TKey>) Überladung und ein instance von
ReverseCompare
werden verwendet, um die Sortierreihenfolge der gekoppelten Arrays umzukehren.Die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32) Überladung wird verwendet, um die letzten drei Elemente beider Arrays zu sortieren.
Die Sort<TKey,TValue>(TKey[], TValue[], Int32, Int32, IComparer<TKey>) Überladung wird verwendet, um die letzten drei Elemente beider Arrays in umgekehrter Reihenfolge zu sortieren.
Hinweis
Die Aufrufe der generischen Methoden unterscheiden sich nicht von Aufrufen ihrer nicht generischen Entsprechungen, da Visual Basic, C# und C++ den Typ des generischen Typparameters vom Typ der ersten beiden Argumente ableiten. Wenn Sie die Ildasm.exe (IL Disassembler) verwenden, um die Microsoft Intermediate Language (MSIL) zu untersuchen, können Sie sehen, dass die generischen Methoden aufgerufen werden.
using namespace System;
using namespace System::Collections::Generic;
public ref class ReverseComparer: IComparer<String^>
{
public:
virtual int Compare(String^ x, String^ y)
{
// Compare y and x in reverse order.
return y->CompareTo(x);
}
};
void main()
{
array<String^>^ dinosaurs = {
"Seismosaurus",
"Chasmosaurus",
"Coelophysis",
"Mamenchisaurus",
"Caudipteryx",
"Cetiosaurus" };
array<int>^ dinosaurSizes = { 40, 5, 3, 22, 1, 18 };
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes)");
Array::Sort(dinosaurs, dinosaurSizes);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
ReverseComparer^ rc = gcnew ReverseComparer();
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, rc)");
Array::Sort(dinosaurs, dinosaurSizes, rc);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3)");
Array::Sort(dinosaurs, dinosaurSizes, 3, 3);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console::WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)");
Array::Sort(dinosaurs, dinosaurSizes, 3, 3, rc);
Console::WriteLine();
for (int i = 0; i < dinosaurs->Length; i++)
{
Console::WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
}
/* This code example produces the following output:
Seismosaurus: up to 40 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Sort(dinosaurs, dinosaurSizes)
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Seismosaurus: up to 40 meters long.
Sort(dinosaurs, dinosaurSizes, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
*/
using System;
using System.Collections.Generic;
public class ReverseComparer: IComparer<string>
{
public int Compare(string x, string y)
{
// Compare y and x in reverse order.
return y.CompareTo(x);
}
}
public class Example
{
public static void Main()
{
string[] dinosaurs = {
"Seismosaurus",
"Chasmosaurus",
"Coelophysis",
"Mamenchisaurus",
"Caudipteryx",
"Cetiosaurus" };
int[] dinosaurSizes = { 40, 5, 3, 22, 1, 18 };
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes)");
Array.Sort(dinosaurs, dinosaurSizes);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
ReverseComparer rc = new ReverseComparer();
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, rc)");
Array.Sort(dinosaurs, dinosaurSizes, rc);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3)");
Array.Sort(dinosaurs, dinosaurSizes, 3, 3);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
Console.WriteLine("\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)");
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc);
Console.WriteLine();
for (int i = 0; i < dinosaurs.Length; i++)
{
Console.WriteLine("{0}: up to {1} meters long.",
dinosaurs[i], dinosaurSizes[i]);
}
}
}
/* This code example produces the following output:
Seismosaurus: up to 40 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Sort(dinosaurs, dinosaurSizes)
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Coelophysis: up to 3 meters long.
Mamenchisaurus: up to 22 meters long.
Seismosaurus: up to 40 meters long.
Sort(dinosaurs, dinosaurSizes, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Caudipteryx: up to 1 meters long.
Cetiosaurus: up to 18 meters long.
Chasmosaurus: up to 5 meters long.
Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Seismosaurus: up to 40 meters long.
Mamenchisaurus: up to 22 meters long.
Coelophysis: up to 3 meters long.
Chasmosaurus: up to 5 meters long.
Cetiosaurus: up to 18 meters long.
Caudipteryx: up to 1 meters long.
*/
open System
open System.Collections.Generic
type ReverseComparer() =
interface IComparer<string> with
member _.Compare(x, y) =
y.CompareTo x
let dinosaurs =
[| "Seismosaurus"
"Chasmosaurus"
"Coelophysis"
"Mamenchisaurus"
"Caudipteryx"
"Cetiosaurus" |]
let dinosaurSizes = [| 40; 5; 3; 22; 1; 18 |]
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes)"
Array.Sort(dinosaurs, dinosaurSizes)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
let rc = ReverseComparer()
printfn "\nSort(dinosaurs, dinosaurSizes, rc)"
Array.Sort(dinosaurs, dinosaurSizes, rc)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes, 3, 3)"
Array.Sort(dinosaurs, dinosaurSizes, 3, 3)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
printfn "\nSort(dinosaurs, dinosaurSizes, 3, 3, rc)"
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
printfn ""
for i = 0 to dinosaurs.Length - 1 do
printfn $"{dinosaurs[i]}: up to {dinosaurSizes[i]} meters long."
// This code example produces the following output:
//
// Seismosaurus: up to 40 meters long.
// Chasmosaurus: up to 5 meters long.
// Coelophysis: up to 3 meters long.
// Mamenchisaurus: up to 22 meters long.
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
//
// Sort(dinosaurs, dinosaurSizes)
//
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
// Chasmosaurus: up to 5 meters long.
// Coelophysis: up to 3 meters long.
// Mamenchisaurus: up to 22 meters long.
// Seismosaurus: up to 40 meters long.
//
// Sort(dinosaurs, dinosaurSizes, rc)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Chasmosaurus: up to 5 meters long.
// Cetiosaurus: up to 18 meters long.
// Caudipteryx: up to 1 meters long.
//
// Sort(dinosaurs, dinosaurSizes, 3, 3)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Caudipteryx: up to 1 meters long.
// Cetiosaurus: up to 18 meters long.
// Chasmosaurus: up to 5 meters long.
//
// Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
//
// Seismosaurus: up to 40 meters long.
// Mamenchisaurus: up to 22 meters long.
// Coelophysis: up to 3 meters long.
// Chasmosaurus: up to 5 meters long.
// Cetiosaurus: up to 18 meters long.
// Caudipteryx: up to 1 meters long.
Imports System.Collections.Generic
Public Class ReverseComparer
Implements IComparer(Of String)
Public Function Compare(ByVal x As String, _
ByVal y As String) As Integer _
Implements IComparer(Of String).Compare
' Compare y and x in reverse order.
Return y.CompareTo(x)
End Function
End Class
Public Class Example
Public Shared Sub Main()
Dim dinosaurs() As String = { _
"Seismosaurus", _
"Chasmosaurus", _
"Coelophysis", _
"Mamenchisaurus", _
"Caudipteryx", _
"Cetiosaurus" }
Dim dinosaurSizes() As Integer = { 40, 5, 3, 22, 1, 18 }
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes)")
Array.Sort(dinosaurs, dinosaurSizes)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Dim rc As New ReverseComparer()
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, rc)")
Array.Sort(dinosaurs, dinosaurSizes, rc)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, 3, 3)")
Array.Sort(dinosaurs, dinosaurSizes, 3, 3)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
Console.WriteLine(vbLf & _
"Sort(dinosaurs, dinosaurSizes, 3, 3, rc)")
Array.Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
Console.WriteLine()
For i As Integer = 0 To dinosaurs.Length - 1
Console.WriteLine("{0}: up to {1} meters long.", _
dinosaurs(i), dinosaurSizes(i))
Next
End Sub
End Class
' This code example produces the following output:
'
'Seismosaurus: up to 40 meters long.
'Chasmosaurus: up to 5 meters long.
'Coelophysis: up to 3 meters long.
'Mamenchisaurus: up to 22 meters long.
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'
'Sort(dinosaurs, dinosaurSizes)
'
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'Chasmosaurus: up to 5 meters long.
'Coelophysis: up to 3 meters long.
'Mamenchisaurus: up to 22 meters long.
'Seismosaurus: up to 40 meters long.
'
'Sort(dinosaurs, dinosaurSizes, rc)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Chasmosaurus: up to 5 meters long.
'Cetiosaurus: up to 18 meters long.
'Caudipteryx: up to 1 meters long.
'
'Sort(dinosaurs, dinosaurSizes, 3, 3)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Caudipteryx: up to 1 meters long.
'Cetiosaurus: up to 18 meters long.
'Chasmosaurus: up to 5 meters long.
'
'Sort(dinosaurs, dinosaurSizes, 3, 3, rc)
'
'Seismosaurus: up to 40 meters long.
'Mamenchisaurus: up to 22 meters long.
'Coelophysis: up to 3 meters long.
'Chasmosaurus: up to 5 meters long.
'Cetiosaurus: up to 18 meters long.
'Caudipteryx: up to 1 meters long.
Hinweise
Jeder Schlüssel im keys
Array verfügt über ein entsprechendes Element im items
Array. Wenn ein Schlüssel während der Sortierung neu positioniert wird, wird das entsprechende Element im items
Array auf ähnliche Weise neu positioniert. Daher wird der items
Array nach der Anordnung der entsprechenden Schlüssel im keys
Arraysortiert.
Jeder Schlüssel innerhalb des angegebenen Bereichs von Elementen in muss keys
Array die IComparable<T> generische Schnittstelle implementieren, um Vergleiche mit jedem anderen Schlüssel durchführen zu können.
Sie können sortieren, wenn mehr Elemente als Schlüssel vorhanden sind, aber die Elemente, die keine entsprechenden Schlüssel haben, werden nicht sortiert. Sie können nicht sortieren, wenn mehr Schlüssel als Elemente vorhanden sind. Dadurch wird ein ArgumentExceptionausgelöst.
Wenn die Sortierung nicht erfolgreich abgeschlossen wurde, sind die Ergebnisse nicht definiert.
Diese Methode verwendet den Algorithmus für die introspektive Sortierung (Introsortierung) wie folgt:
Wenn die Partitionsgröße kleiner als oder gleich 16 Elementen ist, wird ein Einfügesortierungsalgorithmus verwendet.
Wenn die Anzahl der Partitionen 2 * LogN überschreitet, wobei N der Bereich des Eingabearrays ist, wird ein Heapsort-Algorithmus verwendet.
Andernfalls wird ein Quicksort-Algorithmus verwendet.
Diese Implementierung führt eine instabile Sortierung durch. Das heißt, wenn zwei Elemente gleich sind, wird ihre Reihenfolge möglicherweise nicht beibehalten. Im Gegensatz dazu behält eine stabile Sortierung die Reihenfolge der elemente bei, die gleich sind.
Diese Methode ist ein O(n
log n
) -Vorgang, wobei n
ist length
.
Weitere Informationen
Gilt für:
Feedback
https://aka.ms/ContentUserFeedback.
Bald verfügbar: Im Laufe des Jahres 2024 werden wir GitHub-Issues stufenweise als Feedbackmechanismus für Inhalte abbauen und durch ein neues Feedbacksystem ersetzen. Weitere Informationen finden Sie unterFeedback senden und anzeigen für