Convert.ToInt16 Methode
Definition
Wichtig
Einige Informationen beziehen sich auf Vorabversionen, die vor dem Release ggf. grundlegend überarbeitet werden. Microsoft übernimmt hinsichtlich der hier bereitgestellten Informationen keine Gewährleistungen, seien sie ausdrücklich oder konkludent.
Konvertiert einen angegebenen Wert in eine 16-Bit-Ganzzahl mit Vorzeichen.
Überlädt
| ToInt16(Single) |
Konvertiert den Wert der angegebenen Gleitkommazahl mit einfacher Genauigkeit in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(String, IFormatProvider) |
Konvertiert die angegebene Zeichenfolgendarstellung einer Zahl unter Verwendung der angegebenen kulturspezifischen Formatierungsinformationen in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(Object, IFormatProvider) |
Konvertiert den Wert des angegebenen Objekts unter Verwendung der angegebenen kulturspezifischen Formatierungsinformationen in eine 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(UInt64) |
Konvertiert den Wert der angegebenen 64-Bit-Ganzzahl ohne Vorzeichen in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(UInt32) |
Konvertiert den Wert der angegebenen 32-Bit-Ganzzahl ohne Vorzeichen in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(UInt16) |
Konvertiert den Wert der angegebenen 16-Bit-Ganzzahl ohne Vorzeichen in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(String) |
Konvertiert die angegebene Zeichenfolgendarstellung einer Zahl in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(String, Int32) |
Konvertiert die Zeichenfolgendarstellung einer Zahl in einer angegebenen Basis in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(SByte) |
Konvertiert den Wert der angegebenen 8-Bit-Ganzzahl mit Vorzeichen in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(Int16) |
Gibt die angegebene 16-Bit-Ganzzahl mit Vorzeichen zurück. Es wird keine wirkliche Konvertierung durchgeführt. |
| ToInt16(Int64) |
Konvertiert den Wert der angegebenen 64-Bit-Ganzzahl mit Vorzeichen in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(Int32) |
Konvertiert den Wert der angegebenen 32-Bit-Ganzzahl mit Vorzeichen in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(Double) |
Konvertiert den Wert der angegebenen Gleitkommazahl mit doppelter Genauigkeit in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(Decimal) |
Konvertiert den Wert der angegebenen Dezimalzahl in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(DateTime) |
Beim Aufrufen dieser Methode wird immer eine InvalidCastException ausgelöst. |
| ToInt16(Char) |
Konvertiert den Wert des angegebenen Unicode-Zeichens in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(Byte) |
Konvertiert den Wert der angegebenen 8-Bit-Ganzzahl ohne Vorzeichen in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(Boolean) |
Konvertiert den angegebenen booleschen Wert in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen. |
| ToInt16(Object) |
Konvertiert den Wert des angegebenen Objekts in eine 16-Bit-Ganzzahl mit Vorzeichen. |
ToInt16(Single)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert den Wert der angegebenen Gleitkommazahl mit einfacher Genauigkeit in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(float value);public static short ToInt16 (float value);static member ToInt16 : single -> int16Public Shared Function ToInt16 (value As Single) As ShortParameter
- value
- Single
Die zu konvertierende Gleitkommazahl mit einfacher Genauigkeit.
Gibt zurück
value, auf die nächste 16-Bit-Ganzzahl mit Vorzeichen gerundet. Wenn value genau zwischen zwei ganzen Zahlen liegt, wird die gerade Zahl zurückgegeben (d. h. 4,5 wird in 4 und 5,5 in 6 konvertiert).
Ausnahmen
value ist größer als Int16.MaxValue oder kleiner als Int16.MinValue.
Beispiele
Im folgenden Beispiel wird versucht, jedes Element in einem Array von Single Werten in eine 16-Bit-Ganzzahl mit Vorzeichen zu konvertieren.
float[] values = { Single.MinValue, -1.38e10f, -1023.299f, -12.98f,
0f, 9.113e-16f, 103.919f, 17834.191f, Single.MaxValue };
short result;
foreach (float value in values)
{
try {
result = Convert.ToInt16(value);
Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
value.GetType().Name, value, result.GetType().Name, result);
}
catch (OverflowException) {
Console.WriteLine("{0} is outside the range of the Int16 type.", value);
}
}
// The example displays the following output:
// -3.4028235E+38 is outside the range of the Int16 type.
// -1.38E+10 is outside the range of the Int16 type.
// Converted the Single value -1023.299 to the Int16 value -1023.
// Converted the Single value -12.98 to the Int16 value -13.
// Converted the Single value 0 to the Int16 value 0.
// Converted the Single value 9.113E-16 to the Int16 value 0.
// Converted the Single value 103.919 to the Int16 value 104.
// Converted the Single value 17834.191 to the Int16 value 17834.
// 3.4028235E+38 is outside the range of the Int16 type.
let values =
[| Single.MinValue; -1.38e10f; -1023.299f; -12.98f
0f; 9.113e-16f; 103.919f; 17834.191f; Single.MaxValue |]
for value in values do
try
let result = Convert.ToInt16 value
printfn $"Converted the {value.GetType().Name} value {value} to the {result.GetType().Name} value {result}."
with :? OverflowException ->
printfn $"{value} is outside the range of the Int16 type."
// The example displays the following output:
// -3.4028235E+38 is outside the range of the Int16 type.
// -1.38E+10 is outside the range of the Int16 type.
// Converted the Single value -1023.299 to the Int16 value -1023.
// Converted the Single value -12.98 to the Int16 value -13.
// Converted the Single value 0 to the Int16 value 0.
// Converted the Single value 9.113E-16 to the Int16 value 0.
// Converted the Single value 103.919 to the Int16 value 104.
// Converted the Single value 17834.191 to the Int16 value 17834.
// 3.4028235E+38 is outside the range of the Int16 type.
Dim values() As Single = { Single.MinValue, -1.38e10, -1023.299, -12.98, _
0, 9.113e-16, 103.919, 17834.191, Single.MaxValue }
Dim result As Short
For Each value As Single In values
Try
result = Convert.ToInt16(value)
Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
value.GetType().Name, value, result.GetType().Name, result)
Catch e As OverflowException
Console.WriteLine("{0} is outside the range of the Int16 type.", value)
End Try
Next
' The example displays the following output:
' -3.402823E+38 is outside the range of the Int16 type.
' -1.38E+10 is outside the range of the Int16 type.
' Converted the Single value -1023.299 to the Int16 value -1023.
' Converted the Single value -12.98 to the Int16 value -13.
' Converted the Single value 0 to the Int16 value 0.
' Converted the Single value 9.113E-16 to the Int16 value 0.
' Converted the Single value 103.919 to the Int16 value 104.
' Converted the Single value 17834.19 to the Int16 value 17834.
' 3.402823E+38 is outside the range of the Int16 type.
Weitere Informationen
Gilt für:
ToInt16(String, IFormatProvider)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert die angegebene Zeichenfolgendarstellung einer Zahl unter Verwendung der angegebenen kulturspezifischen Formatierungsinformationen in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::String ^ value, IFormatProvider ^ provider);public static short ToInt16 (string value, IFormatProvider provider);public static short ToInt16 (string? value, IFormatProvider? provider);static member ToInt16 : string * IFormatProvider -> int16Public Shared Function ToInt16 (value As String, provider As IFormatProvider) As ShortParameter
- value
- String
Eine Zeichenfolge, die die zu konvertierende Zahl enthält.
- provider
- IFormatProvider
Ein Objekt, das kulturspezifische Formatierungsinformationen bereitstellt.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die der Zahl in value entspricht, oder 0 (null), wenn value gleich null ist.
Ausnahmen
value besteht nicht aus einem optionalen Vorzeichen und einer Folge von Ziffern (0 bis 9).
value stellt eine Zahl dar, die kleiner als Int16.MinValue oder größer als Int16.MaxValue ist.
Beispiele
Im folgenden Beispiel werden Zeichenfolgendarstellungen von 16-Bit-Ganzzahlen mithilfe eines -Objekts mit der ToInt16 -Methode IFormatProvider konvertiert.
// Example of the Convert::ToInt16( String* ) and
// Convert::ToInt16( String*, IFormatProvider* ) methods.
using namespace System;
using namespace System::Globalization;
const __wchar_t * protoFmt = L"{0,-20}{1,-20}{2}";
// Get the exception type name; remove the namespace prefix.
String^ GetExceptionType( Exception^ ex )
{
String^ exceptionType = ex->GetType()->ToString();
return exceptionType->Substring( exceptionType->LastIndexOf( '.' ) + 1 );
}
void ConvertToInt16( String^ numericStr, IFormatProvider^ provider )
{
Object^ defaultValue;
Object^ providerValue;
// Convert numericStr to Int16 without a format provider.
try
{
defaultValue = Convert::ToInt16( numericStr );
}
catch ( Exception^ ex )
{
defaultValue = GetExceptionType( ex );
}
// Convert numericStr to Int16 with a format provider.
try
{
providerValue = Convert::ToInt16( numericStr, provider );
}
catch ( Exception^ ex )
{
providerValue = GetExceptionType( ex );
}
Console::WriteLine( gcnew String( protoFmt ), numericStr, defaultValue, providerValue );
}
int main()
{
// Create a NumberFormatInfo object and set several of its
// properties that apply to numbers.
NumberFormatInfo^ provider = gcnew NumberFormatInfo;
// These properties affect the conversion.
provider->NegativeSign = "neg ";
provider->PositiveSign = "pos ";
// These properties do not affect the conversion.
// The input string cannot have decimal and group separators.
provider->NumberDecimalSeparator = ".";
provider->NumberGroupSeparator = ",";
array<Int32>^sizes = {3};
provider->NumberGroupSizes = sizes;
provider->NumberNegativePattern = 0;
Console::WriteLine( "This example of\n"
" Convert::ToInt16( String* ) and \n"
" Convert::ToInt16( String*, IFormatProvider* ) "
"\ngenerates the following output. It converts "
"several strings to \nshort values, using "
"default formatting or a NumberFormatInfo object.\n" );
Console::WriteLine( gcnew String( protoFmt ), "String to convert", "Default/exception", "Provider/exception" );
Console::WriteLine( gcnew String( protoFmt ), "-----------------", "-----------------", "------------------" );
// Convert strings, with and without an IFormatProvider.
ConvertToInt16( "12345", provider );
ConvertToInt16( "+12345", provider );
ConvertToInt16( "pos 12345", provider );
ConvertToInt16( "-12345", provider );
ConvertToInt16( "neg 12345", provider );
ConvertToInt16( "12345.", provider );
ConvertToInt16( "12,345", provider );
ConvertToInt16( "(12345)", provider );
ConvertToInt16( "32768", provider );
ConvertToInt16( "-32769", provider );
}
/*
This example of
Convert::ToInt16( String* ) and
Convert::ToInt16( String*, IFormatProvider* )
generates the following output. It converts several strings to
short values, using default formatting or a NumberFormatInfo object.
String to convert Default/exception Provider/exception
----------------- ----------------- ------------------
12345 12345 12345
+12345 12345 FormatException
pos 12345 FormatException 12345
-12345 -12345 FormatException
neg 12345 FormatException -12345
12345. FormatException FormatException
12,345 FormatException FormatException
(12345) FormatException FormatException
32768 OverflowException OverflowException
-32769 OverflowException FormatException
*/
// Example of the Convert.ToInt16( string ) and
// Convert.ToInt16( string, IFormatProvider ) methods.
using System;
using System.Globalization;
class ToInt16ProviderDemo
{
static string format = "{0,-20}{1,-20}{2}";
// Get the exception type name; remove the namespace prefix.
static string GetExceptionType( Exception ex )
{
string exceptionType = ex.GetType( ).ToString( );
return exceptionType.Substring(
exceptionType.LastIndexOf( '.' ) + 1 );
}
static void ConvertToInt16( string numericStr,
IFormatProvider provider )
{
object defaultValue;
object providerValue;
// Convert numericStr to Int16 without a format provider.
try
{
defaultValue = Convert.ToInt16( numericStr );
}
catch( Exception ex )
{
defaultValue = GetExceptionType( ex );
}
// Convert numericStr to Int16 with a format provider.
try
{
providerValue = Convert.ToInt16( numericStr, provider );
}
catch( Exception ex )
{
providerValue = GetExceptionType( ex );
}
Console.WriteLine( format, numericStr,
defaultValue, providerValue );
}
public static void Main( )
{
// Create a NumberFormatInfo object and set several of its
// properties that apply to numbers.
NumberFormatInfo provider = new NumberFormatInfo();
// These properties affect the conversion.
provider.NegativeSign = "neg ";
provider.PositiveSign = "pos ";
// These properties do not affect the conversion.
// The input string cannot have decimal and group separators.
provider.NumberDecimalSeparator = ".";
provider.NumberGroupSeparator = ",";
provider.NumberGroupSizes = new int[ ] { 3 };
provider.NumberNegativePattern = 0;
Console.WriteLine("This example of\n" +
" Convert.ToInt16( string ) and \n" +
" Convert.ToInt16( string, IFormatProvider ) " +
"\ngenerates the following output. It converts " +
"several strings to \nshort values, using " +
"default formatting or a NumberFormatInfo object.\n" );
Console.WriteLine( format, "String to convert",
"Default/exception", "Provider/exception" );
Console.WriteLine( format, "-----------------",
"-----------------", "------------------" );
// Convert strings, with and without an IFormatProvider.
ConvertToInt16( "12345", provider );
ConvertToInt16( "+12345", provider );
ConvertToInt16( "pos 12345", provider );
ConvertToInt16( "-12345", provider );
ConvertToInt16( "neg 12345", provider );
ConvertToInt16( "12345.", provider );
ConvertToInt16( "12,345", provider );
ConvertToInt16( "(12345)", provider );
ConvertToInt16( "32768", provider );
ConvertToInt16( "-32769", provider );
}
}
/*
This example of
Convert.ToInt16( string ) and
Convert.ToInt16( string, IFormatProvider )
generates the following output. It converts several strings to
short values, using default formatting or a NumberFormatInfo object.
String to convert Default/exception Provider/exception
----------------- ----------------- ------------------
12345 12345 12345
+12345 12345 FormatException
pos 12345 FormatException 12345
-12345 -12345 FormatException
neg 12345 FormatException -12345
12345. FormatException FormatException
12,345 FormatException FormatException
(12345) FormatException FormatException
32768 OverflowException OverflowException
-32769 OverflowException FormatException
*/
// Example of the Convert.ToInt16( string ) and
// Convert.ToInt16( string, IFormatProvider ) methods.
open System
open System.Globalization
let format obj1 obj2 obj3 = printfn $"{obj1,-20}{obj2,-20}{obj3}"
// Get the exception type name; remove the namespace prefix.
let getExceptionType (ex: exn) =
let exceptionType = ex.GetType() |> string
exceptionType.Substring(exceptionType.LastIndexOf '.' + 1)
let convertToInt16 (numericStr: string) (provider: IFormatProvider) =
// Convert numericStr to Int16 without a format provider.
let defaultValue =
try
Convert.ToInt16 numericStr
|> string
with ex ->
getExceptionType ex
// Convert numericStr to Int16 with a format provider.
let providerValue =
try
Convert.ToInt16(numericStr, provider)
|> string
with ex ->
getExceptionType ex
format numericStr defaultValue providerValue
// Create a NumberFormatInfo object and set several of its
// properties that apply to numbers.
let provider = NumberFormatInfo()
// These properties affect the conversion.
provider.NegativeSign <- "neg "
provider.PositiveSign <- "pos "
// These properties do not affect the conversion.
// The input string cannot have decimal and group separators.
provider.NumberDecimalSeparator <- "."
provider.NumberGroupSeparator <- ","
provider.NumberGroupSizes <- [| 3 |]
provider.NumberNegativePattern <- 0
printfn
"""This example of
Convert.ToInt16( string ) and
Convert.ToInt16( string, IFormatProvider )
generates the following output. It converts several strings to
short values, using default formatting or a NumberFormatInfo object.
"""
format "String to convert" "Default/exception" "Provider/exception"
format "-----------------" "-----------------" "------------------"
// Convert strings, with and without an IFormatProvider.
convertToInt16 "12345" provider
convertToInt16 "+12345" provider
convertToInt16 "pos 12345" provider
convertToInt16 "-12345" provider
convertToInt16 "neg 12345" provider
convertToInt16 "12345." provider
convertToInt16 "12,345" provider
convertToInt16 "(12345)" provider
convertToInt16 "32768" provider
convertToInt16 "-32769" provider
// This example of
// Convert.ToInt16( string ) and
// Convert.ToInt16( string, IFormatProvider )
// generates the following output. It converts several strings to
// short values, using default formatting or a NumberFormatInfo object.
//
// String to convert Default/exception Provider/exception
// ----------------- ----------------- ------------------
// 12345 12345 12345
// +12345 12345 FormatException
// pos 12345 FormatException 12345
// -12345 -12345 FormatException
// neg 12345 FormatException -12345
// 12345. FormatException FormatException
// 12,345 FormatException FormatException
// (12345) FormatException FormatException
// 32768 OverflowException OverflowException
// -32769 OverflowException FormatException
' Example of the Convert.ToInt16( String ) and
' Convert.ToInt16( String, IFormatProvider ) methods.
Imports System.Globalization
Module ToInt16ProviderDemo
Dim format As String = "{0,-20}{1,-20}{2}"
' Get the exception type name; remove the namespace prefix.
Function GetExceptionType( ex As Exception ) As String
Dim exceptionType As String = ex.GetType( ).ToString( )
Return exceptionType.Substring( _
exceptionType.LastIndexOf( "."c ) + 1 )
End Function
Sub ConvertToInt16( numericStr As String, _
provider As IFormatProvider )
Dim defaultValue As Object
Dim providerValue As Object
' Convert numericStr to Int16 without a format provider.
Try
defaultValue = Convert.ToInt16( numericStr )
Catch ex As Exception
defaultValue = GetExceptionType( ex )
End Try
' Convert numericStr to Int16 with a format provider.
Try
providerValue = Convert.ToInt16( numericStr, provider )
Catch ex As Exception
providerValue = GetExceptionType( ex )
End Try
Console.WriteLine( format, numericStr, _
defaultValue, providerValue )
End Sub
Sub Main( )
' Create a NumberFormatInfo object and set several of its
' properties that apply to numbers.
Dim provider As NumberFormatInfo = new NumberFormatInfo( )
' These properties affect the conversion.
provider.NegativeSign = "neg "
provider.PositiveSign = "pos "
' These properties do not affect the conversion.
' The input string cannot have decimal and group separators.
provider.NumberDecimalSeparator = "."
provider.NumberGroupSeparator = ","
provider.NumberGroupSizes = New Integer( ) { 3 }
provider.NumberNegativePattern = 0
Console.WriteLine( "This example of" & vbCrLf & _
" Convert.ToInt16( String ) and " & vbCrLf & _
" Convert.ToInt16( String, IFormatProvider ) " & _
vbCrLf & "generates the following output. It " & _
"converts several strings to " & vbCrLf & "Short " & _
"values, using default formatting " & _
"or a NumberFormatInfo object." & vbCrLf )
Console.WriteLine( format, "String to convert", _
"Default/exception", "Provider/exception" )
Console.WriteLine( format, "-----------------", _
"-----------------", "------------------" )
' Convert strings, with and without an IFormatProvider.
ConvertToInt16( "12345", provider )
ConvertToInt16( "+12345", provider )
ConvertToInt16( "pos 12345", provider )
ConvertToInt16( "-12345", provider )
ConvertToInt16( "neg 12345", provider )
ConvertToInt16( "12345.", provider )
ConvertToInt16( "12,345", provider )
ConvertToInt16( "(12345)", provider )
ConvertToInt16( "32768", provider )
ConvertToInt16( "-32769", provider )
End Sub
End Module
' This example of
' Convert.ToInt16( String ) and
' Convert.ToInt16( String, IFormatProvider )
' generates the following output. It converts several strings to
' Short values, using default formatting or a NumberFormatInfo object.
'
' String to convert Default/exception Provider/exception
' ----------------- ----------------- ------------------
' 12345 12345 12345
' +12345 12345 FormatException
' pos 12345 FormatException 12345
' -12345 -12345 FormatException
' neg 12345 FormatException -12345
' 12345. FormatException FormatException
' 12,345 FormatException FormatException
' (12345) FormatException FormatException
' 32768 OverflowException OverflowException
' -32769 OverflowException FormatException
Hinweise
providerist eine IFormatProvider instance, die ein NumberFormatInfo -Objekt abruft. Das NumberFormatInfo -Objekt stellt kulturspezifische Informationen zum Format von bereit value. Wenn provider ist null, wird der NumberFormatInfo für die aktuelle Kultur verwendet.
Wenn Sie es vorziehen, keine Ausnahme zu behandeln, wenn die Konvertierung fehlschlägt, können Sie stattdessen die Int16.TryParse -Methode aufrufen. Es gibt einen Boolean Wert zurück, der angibt, ob die Konvertierung erfolgreich war oder fehlgeschlagen ist.
Weitere Informationen
Gilt für:
ToInt16(Object, IFormatProvider)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert den Wert des angegebenen Objekts unter Verwendung der angegebenen kulturspezifischen Formatierungsinformationen in eine 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::Object ^ value, IFormatProvider ^ provider);public static short ToInt16 (object value, IFormatProvider provider);public static short ToInt16 (object? value, IFormatProvider? provider);static member ToInt16 : obj * IFormatProvider -> int16Public Shared Function ToInt16 (value As Object, provider As IFormatProvider) As ShortParameter
- value
- Object
Ein Objekt, das die IConvertible-Schnittstelle implementiert.
- provider
- IFormatProvider
Ein Objekt, das kulturspezifische Formatierungsinformationen bereitstellt.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die value entspricht, oder 0 (null), wenn value gleich null ist.
Ausnahmen
value weist kein geeignetes Format für einen Int16-Typ auf.
value implementiert nicht IConvertible.
value stellt eine Zahl dar, die kleiner als Int16.MinValue oder größer als Int16.MaxValue ist.
Beispiele
Das folgende Beispiel definiert eine Klasse, die implementiert IConvertible , und eine Klasse, die implementiert IFormatProvider. Objekte der -Klasse, die implementiert, IConvertible enthalten ein Array von Double Werten. Ein Objekt jeder Klasse wird an die ToInt16 -Methode übergeben. Diese Methode gibt einen Durchschnitt des Arrays von Double Werten zurück, wobei das Objekt verwendet wird, das implementiert IFormatProvider wird, um zu bestimmen, wie der Durchschnitt berechnet werden soll.
using namespace System;
using namespace System::Collections;
// Define the types of averaging available in the class
// implementing IConvertible.
public enum class AverageType : short
{
None = 0,
GeometricMean = 1,
ArithmeticMean = 2,
Median = 3
};
// Pass an instance of this class to methods that require an
// IFormatProvider. The class instance determines the type of
// average to calculate.
ref class AverageInfo: public IFormatProvider
{
protected:
AverageType AvgType;
public:
// Specify the type of averaging in the constructor.
AverageInfo( AverageType avgType )
{
this->AvgType = avgType;
}
// This method returns a reference to the containing object
// if an object of AverageInfo type is requested.
virtual Object^ GetFormat( Type^ argType )
{
if ( argType == AverageInfo::typeid)
return this;
else
return (Object^)0;
}
property AverageType TypeOfAverage
{
// Use this property to set or get the type of averaging.
AverageType get()
{
return this->AvgType;
}
void set( AverageType value )
{
this->AvgType = value;
}
}
};
// This class encapsulates an array of double values and implements
// the IConvertible interface. Most of the IConvertible methods
// return an average of the array elements in one of three types:
// arithmetic mean, geometric mean, or median.
ref class DataSet: public IConvertible
{
private:
static Object^ null = nullptr;
protected:
ArrayList^ data;
AverageInfo^ defaultProvider;
// This method unboxes a boxed double.
double UnBoxDouble( Object^ obj )
{
return *static_cast<double^>(obj);
}
public:
// Construct the object and add an initial list of values.
// Create a default format provider.
DataSet( ... array<Double>^values )
{
data = gcnew ArrayList( (Array^)values );
defaultProvider = gcnew AverageInfo( AverageType::ArithmeticMean );
}
// Add additional values with this method.
int Add( double value )
{
data->Add( value );
return data->Count;
}
property double Item[ int ]
{
// Get, set, and add values with this indexer property.
double get( int index )
{
if ( index >= 0 && index < data->Count )
return UnBoxDouble( data[ index ] );
else
throw gcnew InvalidOperationException( "[DataSet.get] Index out of range." );
}
void set( int index, double value )
{
if ( index >= 0 && index < data->Count )
data[ index ] = value;
else
if ( index == data->Count )
data->Add( value );
else
throw gcnew InvalidOperationException( "[DataSet.set] Index out of range." );
}
}
property int Count
{
// This property returns the number of elements in the object.
int get()
{
return data->Count;
}
}
protected:
// This method calculates the average of the object's elements.
double Average( AverageType avgType )
{
double SumProd;
if ( data->Count == 0 )
return 0.0;
switch ( avgType )
{
case AverageType::GeometricMean:
SumProd = 1.0;
for ( int Index = 0; Index < data->Count; Index++ )
SumProd *= UnBoxDouble( data[ Index ] );
// This calculation will not fail with negative
// elements.
return Math::Sign( SumProd ) * Math::Pow( Math::Abs( SumProd ), 1.0 / data->Count );
case AverageType::ArithmeticMean:
SumProd = 0.0;
for ( int Index = 0; Index < data->Count; Index++ )
SumProd += UnBoxDouble( data[ Index ] );
return SumProd / data->Count;
case AverageType::Median:
if ( data->Count % 2 == 0 )
return (UnBoxDouble( data[ data->Count / 2 ] ) + UnBoxDouble( data[ data->Count / 2 - 1 ] )) / 2.0;
else
return UnBoxDouble( data[ data->Count / 2 ] );
default:
return 0.0;
}
}
// Get the AverageInfo object from the caller's format provider,
// or use the local default.
AverageInfo^ GetAverageInfo( IFormatProvider^ provider )
{
AverageInfo^ avgInfo = nullptr;
if ( provider != nullptr )
avgInfo = static_cast<AverageInfo^>(provider->GetFormat( AverageInfo::typeid ));
if ( avgInfo == nullptr )
return defaultProvider;
else
return avgInfo;
}
// Calculate the average and limit the range.
double CalcNLimitAverage( double min, double max, IFormatProvider^ provider )
{
// Get the format provider and calculate the average.
AverageInfo^ avgInfo = GetAverageInfo( provider );
double avg = Average( avgInfo->TypeOfAverage );
// Limit the range, based on the minimum and maximum values
// for the type.
return avg > max ? max : avg < min ? min : avg;
}
public:
// The following elements are required by IConvertible.
// None of these conversion functions throw exceptions. When
// the data is out of range for the type, the appropriate
// MinValue or MaxValue is used.
virtual TypeCode GetTypeCode()
{
return TypeCode::Object;
}
virtual bool ToBoolean( IFormatProvider^ provider )
{
// ToBoolean is false if the dataset is empty.
if ( data->Count <= 0 )
return false;
// For median averaging, ToBoolean is true if any
// non-discarded elements are nonzero.
else
// For median averaging, ToBoolean is true if any
// non-discarded elements are nonzero.
if ( AverageType::Median == GetAverageInfo( provider )->TypeOfAverage )
{
if ( data->Count % 2 == 0 )
return (UnBoxDouble( data[ data->Count / 2 ] ) != 0.0 || UnBoxDouble( data[ data->Count / 2 - 1 ] ) != 0.0);
else
return UnBoxDouble( data[ data->Count / 2 ] ) != 0.0;
}
// For arithmetic or geometric mean averaging, ToBoolean is
// true if any element of the dataset is nonzero.
else
{
for ( int Index = 0; Index < data->Count; Index++ )
if ( UnBoxDouble( data[ Index ] ) != 0.0 )
return true;
return false;
}
}
virtual Byte ToByte( IFormatProvider^ provider )
{
return Convert::ToByte( CalcNLimitAverage( Byte::MinValue, Byte::MaxValue, provider ) );
}
virtual Char ToChar( IFormatProvider^ provider )
{
return Convert::ToChar( Convert::ToUInt16( CalcNLimitAverage( Char::MinValue, Char::MaxValue, provider ) ) );
}
// Convert to DateTime by adding the calculated average as
// seconds to the current date and time. A valid DateTime is
// always returned.
virtual DateTime ToDateTime( IFormatProvider^ provider )
{
double seconds = Average( GetAverageInfo( provider )->TypeOfAverage );
try
{
return DateTime::Now.AddSeconds( seconds );
}
catch ( ArgumentOutOfRangeException^ )
{
return seconds < 0.0 ? DateTime::MinValue : DateTime::MaxValue;
}
}
virtual Decimal ToDecimal( IFormatProvider^ provider )
{
// The Double conversion rounds Decimal.MinValue and
// Decimal.MaxValue to invalid Decimal values, so the
// following limits must be used.
return Convert::ToDecimal( CalcNLimitAverage( -79228162514264330000000000000.0, 79228162514264330000000000000.0, provider ) );
}
virtual double ToDouble( IFormatProvider^ provider )
{
return Average( GetAverageInfo( provider )->TypeOfAverage );
}
virtual short ToInt16( IFormatProvider^ provider )
{
return Convert::ToInt16( CalcNLimitAverage( Int16::MinValue, Int16::MaxValue, provider ) );
}
virtual int ToInt32( IFormatProvider^ provider )
{
return Convert::ToInt32( CalcNLimitAverage( Int32::MinValue, Int32::MaxValue, provider ) );
}
virtual __int64 ToInt64( IFormatProvider^ provider )
{
// The Double conversion rounds Int64.MinValue and
// Int64.MaxValue to invalid Int64 values, so the following
// limits must be used.
return Convert::ToInt64( CalcNLimitAverage( -9223372036854775000, 9223372036854775000, provider ) );
}
virtual signed char ToSByte( IFormatProvider^ provider )
{
return Convert::ToSByte( CalcNLimitAverage( SByte::MinValue, SByte::MaxValue, provider ) );
}
virtual float ToSingle( IFormatProvider^ provider )
{
return Convert::ToSingle( CalcNLimitAverage( Single::MinValue, Single::MaxValue, provider ) );
}
virtual UInt16 ToUInt16( IFormatProvider^ provider )
{
return Convert::ToUInt16( CalcNLimitAverage( UInt16::MinValue, UInt16::MaxValue, provider ) );
}
virtual UInt32 ToUInt32( IFormatProvider^ provider )
{
return Convert::ToUInt32( CalcNLimitAverage( UInt32::MinValue, UInt32::MaxValue, provider ) );
}
virtual UInt64 ToUInt64( IFormatProvider^ provider )
{
// The Double conversion rounds UInt64.MaxValue to an invalid
// UInt64 value, so the following limit must be used.
return Convert::ToUInt64( CalcNLimitAverage( 0, 18446744073709550000.0, provider ) );
}
virtual Object^ ToType( Type^ conversionType, IFormatProvider^ provider )
{
return Convert::ChangeType( Average( GetAverageInfo( provider )->TypeOfAverage ), conversionType );
}
virtual String^ ToString( IFormatProvider^ provider )
{
AverageType avgType = GetAverageInfo( provider )->TypeOfAverage;
return String::Format( "( {0}: {1:G10} )", avgType, Average( avgType ) );
}
};
// Display a DataSet with three different format providers.
void DisplayDataSet( DataSet^ ds )
{
IFormatProvider^ null = nullptr;
String^ fmt = "{0,-12}{1,20}{2,20}{3,20}";
AverageInfo^ median = gcnew AverageInfo( AverageType::Median );
AverageInfo^ geMean = gcnew AverageInfo( AverageType::GeometricMean );
// Display the dataset elements.
if ( ds->Count > 0 )
{
Console::Write( "\nDataSet: [{0}", ds->Item[ 0 ] );
for ( int iX = 1; iX < ds->Count; iX++ )
Console::Write( ", {0}", ds->Item[ iX ] );
Console::WriteLine( "]\n" );
}
Console::WriteLine( fmt, "Convert::", "Default", "Geometric Mean", "Median" );
Console::WriteLine( fmt, "---------", "-------", "--------------", "------" );
Console::WriteLine( fmt, "ToBoolean", Convert::ToBoolean( ds, null ), Convert::ToBoolean( ds, geMean ), Convert::ToBoolean( ds, median ) );
Console::WriteLine( fmt, "ToByte", Convert::ToByte( ds, null ), Convert::ToByte( ds, geMean ), Convert::ToByte( ds, median ) );
Console::WriteLine( fmt, "ToChar", Convert::ToChar( ds, null ), Convert::ToChar( ds, geMean ), Convert::ToChar( ds, median ) );
Console::WriteLine( "{0,-12}{1,20:yyyy-MM-dd HH:mm:ss}"
"{2,20:yyyy-MM-dd HH:mm:ss}{3,20:yyyy-MM-dd HH:mm:ss}", "ToDateTime", Convert::ToDateTime( ds, null ), Convert::ToDateTime( ds, geMean ), Convert::ToDateTime( ds, median ) );
Console::WriteLine( fmt, "ToDecimal", Convert::ToDecimal( ds, null ), Convert::ToDecimal( ds, geMean ), Convert::ToDecimal( ds, median ) );
Console::WriteLine( fmt, "ToDouble", Convert::ToDouble( ds, null ), Convert::ToDouble( ds, geMean ), Convert::ToDouble( ds, median ) );
Console::WriteLine( fmt, "ToInt16", Convert::ToInt16( ds, null ), Convert::ToInt16( ds, geMean ), Convert::ToInt16( ds, median ) );
Console::WriteLine( fmt, "ToInt32", Convert::ToInt32( ds, null ), Convert::ToInt32( ds, geMean ), Convert::ToInt32( ds, median ) );
Console::WriteLine( fmt, "ToInt64", Convert::ToInt64( ds, null ), Convert::ToInt64( ds, geMean ), Convert::ToInt64( ds, median ) );
Console::WriteLine( fmt, "ToSByte", Convert::ToSByte( ds, null ), Convert::ToSByte( ds, geMean ), Convert::ToSByte( ds, median ) );
Console::WriteLine( fmt, "ToSingle", Convert::ToSingle( ds, null ), Convert::ToSingle( ds, geMean ), Convert::ToSingle( ds, median ) );
Console::WriteLine( fmt, "ToUInt16", Convert::ToUInt16( ds, null ), Convert::ToUInt16( ds, geMean ), Convert::ToUInt16( ds, median ) );
Console::WriteLine( fmt, "ToUInt32", Convert::ToUInt32( ds, null ), Convert::ToUInt32( ds, geMean ), Convert::ToUInt32( ds, median ) );
Console::WriteLine( fmt, "ToUInt64", Convert::ToUInt64( ds, null ), Convert::ToUInt64( ds, geMean ), Convert::ToUInt64( ds, median ) );
}
int main()
{
Console::WriteLine( "This example of the "
"Convert::To<Type>( Object*, IFormatProvider* ) methods "
"\ngenerates the following output. The example "
"displays the values \nreturned by the methods, "
"using several IFormatProvider objects.\n" );
// To call a [ParamArray] method in C++, you cannot just
// list the parameters, you need to build an array.
array<Double>^dataElem = gcnew array<Double>(6);
dataElem[ 0 ] = 10.5;
dataElem[ 1 ] = 22.2;
dataElem[ 2 ] = 45.9;
dataElem[ 3 ] = 88.7;
dataElem[ 4 ] = 156.05;
dataElem[ 5 ] = 297.6;
DataSet^ ds1 = gcnew DataSet( dataElem );
DisplayDataSet( ds1 );
dataElem = gcnew array<Double>(5);
dataElem[ 0 ] = 359999.95;
dataElem[ 1 ] = 425000;
dataElem[ 2 ] = 499999.5;
dataElem[ 3 ] = 775000;
dataElem[ 4 ] = 1695000;
DataSet^ ds2 = gcnew DataSet( dataElem );
DisplayDataSet( ds2 );
}
/*
This example of the Convert::To<Type>( Object*, IFormatProvider* ) methods
generates the following output. The example displays the values
returned by the methods, using several IFormatProvider objects.
DataSet: [10.5, 22.2, 45.9, 88.7, 156.05, 297.6]
Convert:: Default Geometric Mean Median
--------- ------- -------------- ------
ToBoolean True True True
ToByte 103 59 67
ToChar g ; C
ToDateTime 2003-05-13 15:30:23 2003-05-13 15:29:39 2003-05-13 15:29:47
ToDecimal 103.491666666667 59.4332135445164 67.3
ToDouble 103.491666666667 59.4332135445164 67.3
ToInt16 103 59 67
ToInt32 103 59 67
ToInt64 103 59 67
ToSByte 103 59 67
ToSingle 103.4917 59.43321 67.3
ToUInt16 103 59 67
ToUInt32 103 59 67
ToUInt64 103 59 67
DataSet: [359999.95, 425000, 499999.5, 775000, 1695000]
Convert:: Default Geometric Mean Median
--------- ------- -------------- ------
ToBoolean True True True
ToByte 255 255 255
ToChar ? ? ?
ToDateTime 2003-05-22 08:05:19 2003-05-20 22:54:57 2003-05-19 10:21:59
ToDecimal 750999.89 631577.237188435 499999.5
ToDouble 750999.89 631577.237188435 499999.5
ToInt16 32767 32767 32767
ToInt32 751000 631577 500000
ToInt64 751000 631577 500000
ToSByte 127 127 127
ToSingle 750999.9 631577.3 499999.5
ToUInt16 65535 65535 65535
ToUInt32 751000 631577 500000
ToUInt64 751000 631577 500000
*/
using System;
using System.Collections;
// Define the types of averaging available in the class
// implementing IConvertible.
public enum AverageType : short
{
None = 0,
GeometricMean = 1,
ArithmeticMean = 2,
Median = 3
};
// Pass an instance of this class to methods that require an
// IFormatProvider. The class instance determines the type of
// average to calculate.
public class AverageInfo : IFormatProvider
{
protected AverageType AvgType;
// Specify the type of averaging in the constructor.
public AverageInfo( AverageType avgType )
{
this.AvgType = avgType;
}
// This method returns a reference to the containing object
// if an object of AverageInfo type is requested.
public object GetFormat( Type argType )
{
if ( argType == typeof( AverageInfo ) )
return this;
else
return null;
}
// Use this property to set or get the type of averaging.
public AverageType TypeOfAverage
{
get { return this.AvgType; }
set { this.AvgType = value; }
}
}
// This class encapsulates an array of double values and implements
// the IConvertible interface. Most of the IConvertible methods
// return an average of the array elements in one of three types:
// arithmetic mean, geometric mean, or median.
public class DataSet : IConvertible
{
protected ArrayList data;
protected AverageInfo defaultProvider;
// Construct the object and add an initial list of values.
// Create a default format provider.
public DataSet( params double[ ] values )
{
data = new ArrayList( values );
defaultProvider =
new AverageInfo( AverageType.ArithmeticMean );
}
// Add additional values with this method.
public int Add( double value )
{
data.Add( value );
return data.Count;
}
// Get, set, and add values with this indexer property.
public double this[ int index ]
{
get
{
if( index >= 0 && index < data.Count )
return (double)data[ index ];
else
throw new InvalidOperationException(
"[DataSet.get] Index out of range." );
}
set
{
if( index >= 0 && index < data.Count )
data[ index ] = value;
else if( index == data.Count )
data.Add( value );
else
throw new InvalidOperationException(
"[DataSet.set] Index out of range." );
}
}
// This property returns the number of elements in the object.
public int Count
{
get { return data.Count; }
}
// This method calculates the average of the object's elements.
protected double Average( AverageType avgType )
{
double SumProd;
if( data.Count == 0 )
return 0.0;
switch( avgType )
{
case AverageType.GeometricMean:
SumProd = 1.0;
for( int Index = 0; Index < data.Count; Index++ )
SumProd *= (double)data[ Index ];
// This calculation will not fail with negative
// elements.
return Math.Sign( SumProd ) * Math.Pow(
Math.Abs( SumProd ), 1.0 / data.Count );
case AverageType.ArithmeticMean:
SumProd = 0.0;
for( int Index = 0; Index < data.Count; Index++ )
SumProd += (double)data[ Index ];
return SumProd / data.Count;
case AverageType.Median:
if( data.Count % 2 == 0 )
return ( (double)data[ data.Count / 2 ] +
(double)data[ data.Count / 2 - 1 ] ) / 2.0;
else
return (double)data[ data.Count / 2 ];
default:
return 0.0;
}
}
// Get the AverageInfo object from the caller's format provider,
// or use the local default.
protected AverageInfo GetAverageInfo( IFormatProvider provider )
{
AverageInfo avgInfo = null;
if( provider != null )
avgInfo = (AverageInfo)provider.GetFormat(
typeof( AverageInfo ) );
if ( avgInfo == null )
return defaultProvider;
else
return avgInfo;
}
// Calculate the average and limit the range.
protected double CalcNLimitAverage( double min, double max,
IFormatProvider provider )
{
// Get the format provider and calculate the average.
AverageInfo avgInfo = GetAverageInfo( provider );
double avg = Average( avgInfo.TypeOfAverage );
// Limit the range, based on the minimum and maximum values
// for the type.
return avg > max ? max : avg < min ? min : avg;
}
// The following elements are required by IConvertible.
// None of these conversion functions throw exceptions. When
// the data is out of range for the type, the appropriate
// MinValue or MaxValue is used.
public TypeCode GetTypeCode( )
{
return TypeCode.Object;
}
public bool ToBoolean( IFormatProvider provider )
{
// ToBoolean is false if the dataset is empty.
if( data.Count <= 0 )
{
return false;
}
// For median averaging, ToBoolean is true if any
// non-discarded elements are nonzero.
else if( AverageType.Median ==
GetAverageInfo( provider ).TypeOfAverage )
{
if (data.Count % 2 == 0 )
return ( (double)data[ data.Count / 2 ] != 0.0 ||
(double)data[ data.Count / 2 - 1 ] != 0.0 );
else
return (double)data[ data.Count / 2 ] != 0.0;
}
// For arithmetic or geometric mean averaging, ToBoolean is
// true if any element of the dataset is nonzero.
else
{
for( int Index = 0; Index < data.Count; Index++ )
if( (double)data[ Index ] != 0.0 )
return true;
return false;
}
}
public byte ToByte( IFormatProvider provider )
{
return Convert.ToByte( CalcNLimitAverage(
Byte.MinValue, Byte.MaxValue, provider ) );
}
public char ToChar( IFormatProvider provider )
{
return Convert.ToChar( Convert.ToUInt16( CalcNLimitAverage(
Char.MinValue, Char.MaxValue, provider ) ) );
}
// Convert to DateTime by adding the calculated average as
// seconds to the current date and time. A valid DateTime is
// always returned.
public DateTime ToDateTime( IFormatProvider provider )
{
double seconds =
Average( GetAverageInfo( provider ).TypeOfAverage );
try
{
return DateTime.Now.AddSeconds( seconds );
}
catch( ArgumentOutOfRangeException )
{
return seconds < 0.0 ? DateTime.MinValue : DateTime.MaxValue;
}
}
public decimal ToDecimal( IFormatProvider provider )
{
// The Double conversion rounds Decimal.MinValue and
// Decimal.MaxValue to invalid Decimal values, so the
// following limits must be used.
return Convert.ToDecimal( CalcNLimitAverage(
-79228162514264330000000000000.0,
79228162514264330000000000000.0, provider ) );
}
public double ToDouble( IFormatProvider provider )
{
return Average( GetAverageInfo(provider).TypeOfAverage );
}
public short ToInt16( IFormatProvider provider )
{
return Convert.ToInt16( CalcNLimitAverage(
Int16.MinValue, Int16.MaxValue, provider ) );
}
public int ToInt32( IFormatProvider provider )
{
return Convert.ToInt32( CalcNLimitAverage(
Int32.MinValue, Int32.MaxValue, provider ) );
}
public long ToInt64( IFormatProvider provider )
{
// The Double conversion rounds Int64.MinValue and
// Int64.MaxValue to invalid Int64 values, so the following
// limits must be used.
return Convert.ToInt64( CalcNLimitAverage(
-9223372036854775000, 9223372036854775000, provider ) );
}
public SByte ToSByte( IFormatProvider provider )
{
return Convert.ToSByte( CalcNLimitAverage(
SByte.MinValue, SByte.MaxValue, provider ) );
}
public float ToSingle( IFormatProvider provider )
{
return Convert.ToSingle( CalcNLimitAverage(
Single.MinValue, Single.MaxValue, provider ) );
}
public UInt16 ToUInt16( IFormatProvider provider )
{
return Convert.ToUInt16( CalcNLimitAverage(
UInt16.MinValue, UInt16.MaxValue, provider ) );
}
public UInt32 ToUInt32( IFormatProvider provider )
{
return Convert.ToUInt32( CalcNLimitAverage(
UInt32.MinValue, UInt32.MaxValue, provider ) );
}
public UInt64 ToUInt64( IFormatProvider provider )
{
// The Double conversion rounds UInt64.MaxValue to an invalid
// UInt64 value, so the following limit must be used.
return Convert.ToUInt64( CalcNLimitAverage(
0, 18446744073709550000.0, provider ) );
}
public object ToType( Type conversionType,
IFormatProvider provider )
{
return Convert.ChangeType( Average(
GetAverageInfo( provider ).TypeOfAverage ),
conversionType );
}
public string ToString( IFormatProvider provider )
{
AverageType avgType = GetAverageInfo( provider ).TypeOfAverage;
return String.Format( "( {0}: {1:G10} )", avgType,
Average( avgType ) );
}
}
class IConvertibleProviderDemo
{
// Display a DataSet with three different format providers.
public static void DisplayDataSet( DataSet ds )
{
string fmt = "{0,-12}{1,20}{2,20}{3,20}";
AverageInfo median = new AverageInfo( AverageType.Median );
AverageInfo geMean =
new AverageInfo( AverageType.GeometricMean );
// Display the dataset elements.
if( ds.Count > 0 )
{
Console.Write( "\nDataSet: [{0}", ds[ 0 ] );
for( int iX = 1; iX < ds.Count; iX++ )
Console.Write( ", {0}", ds[ iX ] );
Console.WriteLine( "]\n" );
}
Console.WriteLine( fmt, "Convert.", "Default",
"Geometric Mean", "Median");
Console.WriteLine( fmt, "--------", "-------",
"--------------", "------");
Console.WriteLine( fmt, "ToBoolean",
Convert.ToBoolean( ds, null ),
Convert.ToBoolean( ds, geMean ),
Convert.ToBoolean( ds, median ) );
Console.WriteLine( fmt, "ToByte",
Convert.ToByte( ds, null ),
Convert.ToByte( ds, geMean ),
Convert.ToByte( ds, median ) );
Console.WriteLine( fmt, "ToChar",
Convert.ToChar( ds, null ),
Convert.ToChar( ds, geMean ),
Convert.ToChar( ds, median ) );
Console.WriteLine( "{0,-12}{1,20:yyyy-MM-dd HH:mm:ss}" +
"{2,20:yyyy-MM-dd HH:mm:ss}{3,20:yyyy-MM-dd HH:mm:ss}",
"ToDateTime", Convert.ToDateTime( ds, null ),
Convert.ToDateTime( ds, geMean ),
Convert.ToDateTime( ds, median ) );
Console.WriteLine( fmt, "ToDecimal",
Convert.ToDecimal( ds, null ),
Convert.ToDecimal( ds, geMean ),
Convert.ToDecimal( ds, median ) );
Console.WriteLine( fmt, "ToDouble",
Convert.ToDouble( ds, null ),
Convert.ToDouble( ds, geMean ),
Convert.ToDouble( ds, median ) );
Console.WriteLine( fmt, "ToInt16",
Convert.ToInt16( ds, null ),
Convert.ToInt16( ds, geMean ),
Convert.ToInt16( ds, median ) );
Console.WriteLine( fmt, "ToInt32",
Convert.ToInt32( ds, null ),
Convert.ToInt32( ds, geMean ),
Convert.ToInt32( ds, median ) );
Console.WriteLine( fmt, "ToInt64",
Convert.ToInt64( ds, null ),
Convert.ToInt64( ds, geMean ),
Convert.ToInt64( ds, median ) );
Console.WriteLine( fmt, "ToSByte",
Convert.ToSByte( ds, null ),
Convert.ToSByte( ds, geMean ),
Convert.ToSByte( ds, median ) );
Console.WriteLine( fmt, "ToSingle",
Convert.ToSingle( ds, null ),
Convert.ToSingle( ds, geMean ),
Convert.ToSingle( ds, median ) );
Console.WriteLine( fmt, "ToUInt16",
Convert.ToUInt16( ds, null ),
Convert.ToUInt16( ds, geMean ),
Convert.ToUInt16( ds, median ) );
Console.WriteLine( fmt, "ToUInt32",
Convert.ToUInt32( ds, null ),
Convert.ToUInt32( ds, geMean ),
Convert.ToUInt32( ds, median ) );
Console.WriteLine( fmt, "ToUInt64",
Convert.ToUInt64( ds, null ),
Convert.ToUInt64( ds, geMean ),
Convert.ToUInt64( ds, median ) );
}
public static void Main( )
{
Console.WriteLine( "This example of " +
"the Convert.To<Type>( object, IFormatProvider ) methods " +
"\ngenerates the following output. The example " +
"displays the values \nreturned by the methods, " +
"using several IFormatProvider objects.\n" );
DataSet ds1 = new DataSet(
10.5, 22.2, 45.9, 88.7, 156.05, 297.6 );
DisplayDataSet( ds1 );
DataSet ds2 = new DataSet(
359999.95, 425000, 499999.5, 775000, 1695000 );
DisplayDataSet( ds2 );
}
}
/*
This example of the Convert.To<Type>( object, IFormatProvider ) methods
generates the following output. The example displays the values
returned by the methods, using several IFormatProvider objects.
DataSet: [10.5, 22.2, 45.9, 88.7, 156.05, 297.6]
Convert. Default Geometric Mean Median
-------- ------- -------------- ------
ToBoolean True True True
ToByte 103 59 67
ToChar g ; C
ToDateTime 2003-05-13 15:04:12 2003-05-13 15:03:28 2003-05-13 15:03:35
ToDecimal 103.491666666667 59.4332135445164 67.3
ToDouble 103.491666666667 59.4332135445164 67.3
ToInt16 103 59 67
ToInt32 103 59 67
ToInt64 103 59 67
ToSByte 103 59 67
ToSingle 103.4917 59.43321 67.3
ToUInt16 103 59 67
ToUInt32 103 59 67
ToUInt64 103 59 67
DataSet: [359999.95, 425000, 499999.5, 775000, 1695000]
Convert. Default Geometric Mean Median
-------- ------- -------------- ------
ToBoolean True True True
ToByte 255 255 255
ToChar ? ? ?
ToDateTime 2003-05-22 07:39:08 2003-05-20 22:28:45 2003-05-19 09:55:48
ToDecimal 750999.89 631577.237188435 499999.5
ToDouble 750999.89 631577.237188435 499999.5
ToInt16 32767 32767 32767
ToInt32 751000 631577 500000
ToInt64 751000 631577 500000
ToSByte 127 127 127
ToSingle 750999.9 631577.3 499999.5
ToUInt16 65535 65535 65535
ToUInt32 751000 631577 500000
ToUInt64 751000 631577 500000
*/
open System
open System.Collections
// Define the types of averaging available in the class
// implementing IConvertible.
type AverageType =
| None = 0s
| GeometricMean = 1s
| ArithmeticMean = 2s
| Median = 3s
// Pass an instance of this class to methods that require an
// IFormatProvider. The class instance determines the type of
// average to calculate.
[<AllowNullLiteral>]
type AverageInfo(avgType: AverageType) =
// Use this property to set or get the type of averaging.
member val TypeOfAverage = avgType with get, set
interface IFormatProvider with
// This method returns a reference to the containing object
// if an object of AverageInfo type is requested.
member this.GetFormat(argType: Type) =
if argType = typeof<AverageInfo> then
this
else
null
// This class encapsulates an array of double values and implements
// the IConvertible interface. Most of the IConvertible methods
// an average of the array elements in one of three types:
// arithmetic mean, geometric mean, or median.
type DataSet([<ParamArray>] values: double[]) =
let data = ResizeArray values
let defaultProvider =
AverageInfo AverageType.ArithmeticMean
// Add additional values with this method.
member _.Add(value: double) =
data.Add value
data.Count
// Get, set, and add values with this indexer property.
member _.Item
with get (index) =
if index >= 0 && index < data.Count then
data[index]
else
raise (InvalidOperationException "[DataSet.get] Index out of range.")
and set index value =
if index >= 0 && index < data.Count then
data[index] <- value
elif index = data.Count then
data.Add value
else
raise (InvalidOperationException "[DataSet.set] Index out of range.")
// This property returns the number of elements in the object.
member _.Count =
data.Count
// This method calculates the average of the object's elements.
member _.Average(avgType: AverageType) =
if data.Count = 0 then
0.0
else
match avgType with
| AverageType.GeometricMean ->
let sumProd =
Seq.reduce ( * ) data
// This calculation will not fail with negative
// elements.
(sign sumProd |> float) * Math.Pow(abs sumProd, 1.0 / (float data.Count))
| AverageType.ArithmeticMean ->
Seq.average data
| AverageType.Median ->
if data.Count % 2 = 0 then
(data[data.Count / 2] + data[data.Count / 2 - 1]) / 2.0
else
data[ data.Count / 2]
| _ ->
0.0
// Get the AverageInfo object from the caller's format provider,
// or use the local default.
member _.GetAverageInfo(provider: IFormatProvider) =
let avgInfo =
if provider <> null then
provider.GetFormat typeof<AverageInfo> :?> AverageInfo
else
null
if avgInfo = null then
defaultProvider
else
avgInfo
// Calculate the average and limit the range.
member this.CalcNLimitAverage(min: double, max: double, provider: IFormatProvider) =
// Get the format provider and calculate the average.
let avgInfo = this.GetAverageInfo provider
let avg = this.Average avgInfo.TypeOfAverage
// Limit the range, based on the minimum and maximum values
// for the type.
if avg > max then max elif avg < min then min else avg
// The following elements are required by IConvertible.
interface IConvertible with
// None of these conversion functions throw exceptions. When
// the data is out of range for the type, the appropriate
// MinValue or MaxValue is used.
member _.GetTypeCode() =
TypeCode.Object
member this.ToBoolean(provider: IFormatProvider) =
// ToBoolean is false if the dataset is empty.
if data.Count <= 0 then
false
// For median averaging, ToBoolean is true if any
// non-discarded elements are nonzero.
elif AverageType.Median = this.GetAverageInfo(provider).TypeOfAverage then
if data.Count % 2 = 0 then
(data[data.Count / 2] <> 0.0 || data[data.Count / 2 - 1] <> 0.0)
else
data[data.Count / 2] <> 0.0
// For arithmetic or geometric mean averaging, ToBoolean is
// true if any element of the dataset is nonzero.
else
Seq.exists (fun x -> x <> 0.0) data
member this.ToByte(provider: IFormatProvider) =
Convert.ToByte(this.CalcNLimitAverage(float Byte.MinValue, float Byte.MaxValue, provider) )
member this.ToChar(provider: IFormatProvider) =
Convert.ToChar(Convert.ToUInt16(this.CalcNLimitAverage(float Char.MinValue, float Char.MaxValue, provider) ) )
// Convert to DateTime by adding the calculated average as
// seconds to the current date and time. A valid DateTime is
// always returned.
member this.ToDateTime(provider: IFormatProvider) =
let seconds = this.Average(this.GetAverageInfo(provider).TypeOfAverage)
try
DateTime.Now.AddSeconds seconds
with :? ArgumentOutOfRangeException ->
if seconds < 0.0 then DateTime.MinValue else DateTime.MaxValue
member this.ToDecimal(provider: IFormatProvider) =
// The Double conversion rounds Decimal.MinValue and
// Decimal.MaxValue to invalid Decimal values, so the
// following limits must be used.
Convert.ToDecimal(this.CalcNLimitAverage(-79228162514264330000000000000.0, 79228162514264330000000000000.0, provider) )
member this.ToDouble(provider: IFormatProvider) =
this.Average(this.GetAverageInfo(provider).TypeOfAverage)
member this.ToInt16(provider: IFormatProvider) =
Convert.ToInt16(this.CalcNLimitAverage(float Int16.MinValue, float Int16.MaxValue, provider) )
member this.ToInt32(provider: IFormatProvider) =
Convert.ToInt32(this.CalcNLimitAverage(Int32.MinValue, Int32.MaxValue, provider) )
member this.ToInt64(provider: IFormatProvider) =
// The Double conversion rounds Int64.MinValue and
// Int64.MaxValue to invalid Int64 values, so the following
// limits must be used.
Convert.ToInt64(this.CalcNLimitAverage(-9223372036854775000., 9223372036854775000., provider) )
member this.ToSByte(provider: IFormatProvider) =
Convert.ToSByte(this.CalcNLimitAverage(float SByte.MinValue, float SByte.MaxValue, provider) )
member this.ToSingle(provider: IFormatProvider) =
Convert.ToSingle(this.CalcNLimitAverage(float Single.MinValue, float Single.MaxValue, provider) )
member this.ToUInt16(provider: IFormatProvider) =
Convert.ToUInt16(this.CalcNLimitAverage(float UInt16.MinValue, float UInt16.MaxValue, provider) )
member this.ToUInt32(provider: IFormatProvider) =
Convert.ToUInt32(this.CalcNLimitAverage(float UInt32.MinValue, float UInt32.MaxValue, provider) )
member this.ToUInt64(provider: IFormatProvider) =
// The Double conversion rounds UInt64.MaxValue to an invalid
// UInt64 value, so the following limit must be used.
Convert.ToUInt64(this.CalcNLimitAverage(0, 18446744073709550000.0, provider) )
member this.ToType(conversionType: Type, provider: IFormatProvider) =
Convert.ChangeType(this.Average(this.GetAverageInfo(provider).TypeOfAverage), conversionType)
member this.ToString(provider: IFormatProvider) =
let avgType = this.GetAverageInfo(provider).TypeOfAverage
$"( {avgType}: {this.Average avgType:G10} )"
// Display a DataSet with three different format providers.
let displayDataSet (ds: DataSet) =
let fmt obj1 obj2 obj3 obj4 = printfn $"{obj1,-12}{obj2,20}{obj3,20}{obj4,20}"
let median = AverageInfo AverageType.Median
let geMean =
AverageInfo AverageType.GeometricMean
// Display the dataset elements.
if ds.Count > 0 then
printf $"\nDataSet: [{ds[0]}"
for i = 1 to ds.Count - 1 do
printf $", {ds[i]}"
printfn "]\n"
fmt "Convert." "Default" "Geometric Mean" "Median"
fmt "--------" "-------" "--------------" "------"
fmt "ToBoolean"
(Convert.ToBoolean(ds, null))
(Convert.ToBoolean(ds, geMean))
(Convert.ToBoolean(ds, median))
fmt "ToByte"
(Convert.ToByte(ds, null))
(Convert.ToByte(ds, geMean))
(Convert.ToByte(ds, median))
fmt "ToChar"
(Convert.ToChar(ds, null))
(Convert.ToChar(ds, geMean))
(Convert.ToChar(ds, median))
printfn $"""{"ToDateTime",-12}{Convert.ToDateTime(ds, null).ToString "20:yyyy-MM-dd HH:mm:ss"}{Convert.ToDateTime(ds, geMean).ToString "20:yyyy-MM-dd HH:mm:ss"}{Convert.ToDateTime(ds, median).ToString "20:yyyy-MM-dd HH:mm:ss"}"""
fmt "ToDecimal"
(Convert.ToDecimal(ds, null))
(Convert.ToDecimal(ds, geMean))
(Convert.ToDecimal(ds, median))
fmt "ToDouble"
(Convert.ToDouble(ds, null))
(Convert.ToDouble(ds, geMean))
(Convert.ToDouble(ds, median))
fmt "ToInt16"
(Convert.ToInt16(ds, null))
(Convert.ToInt16(ds, geMean))
(Convert.ToInt16(ds, median))
fmt "ToInt32"
(Convert.ToInt32(ds, null))
(Convert.ToInt32(ds, geMean))
(Convert.ToInt32(ds, median))
fmt "ToInt64"
(Convert.ToInt64(ds, null))
(Convert.ToInt64(ds, geMean))
(Convert.ToInt64(ds, median))
fmt "ToSByte"
(Convert.ToSByte(ds, null))
(Convert.ToSByte(ds, geMean))
(Convert.ToSByte(ds, median))
fmt "ToSingle"
(Convert.ToSingle(ds, null))
(Convert.ToSingle(ds, geMean))
(Convert.ToSingle(ds, median))
fmt "ToUInt16"
(Convert.ToUInt16(ds, null))
(Convert.ToUInt16(ds, geMean))
(Convert.ToUInt16(ds, median))
fmt "ToUInt32"
(Convert.ToUInt32(ds, null))
(Convert.ToUInt32(ds, geMean))
(Convert.ToUInt32(ds, median))
fmt "ToUInt64"
(Convert.ToUInt64(ds, null))
(Convert.ToUInt64(ds, geMean))
(Convert.ToUInt64(ds, median))
printfn
"""This example of the Convert.To<Type>( object, IFormatprovider) methods
generates the following output. The example displays the values
returned by the methods, using several IFormatProvider objects.
"""
let ds1 = DataSet(10.5, 22.2, 45.9, 88.7, 156.05, 297.6)
displayDataSet ds1
let ds2 = DataSet(359999.95, 425000, 499999.5, 775000, 1695000)
displayDataSet ds2
// This example of the Convert.To<Type>( object, IFormatprovider) methods
// generates the following output. The example displays the values
// returned by the methods, using several IFormatProvider objects.
//
// DataSet: [10.5, 22.2, 45.9, 88.7, 156.05, 297.6]
//
// Convert. Default Geometric Mean Median
// -------- ------- -------------- ------
// ToBoolean True True True
// ToByte 103 59 67
// ToChar g ; C
// ToDateTime 2003-05-13 15:04:12 2003-05-13 15:03:28 2003-05-13 15:03:35
// ToDecimal 103.491666666667 59.4332135445164 67.3
// ToDouble 103.491666666667 59.4332135445164 67.3
// ToInt16 103 59 67
// ToInt32 103 59 67
// ToInt64 103 59 67
// ToSByte 103 59 67
// ToSingle 103.4917 59.43321 67.3
// ToUInt16 103 59 67
// ToUInt32 103 59 67
// ToUInt64 103 59 67
//
// DataSet: [359999.95, 425000, 499999.5, 775000, 1695000]
//
// Convert. Default Geometric Mean Median
// -------- ------- -------------- ------
// ToBoolean True True True
// ToByte 255 255 255
// ToChar ? ? ?
// ToDateTime 2003-05-22 07:39:08 2003-05-20 22:28:45 2003-05-19 09:55:48
// ToDecimal 750999.89 631577.237188435 499999.5
// ToDouble 750999.89 631577.237188435 499999.5
// ToInt16 32767 32767 32767
// ToInt32 751000 631577 500000
// ToInt64 751000 631577 500000
// ToSByte 127 127 127
// ToSingle 750999.9 631577.3 499999.5
// ToUInt16 65535 65535 65535
// ToUInt32 751000 631577 500000
// ToUInt64 751000 631577 500000
Imports System.Collections
Module IConvertibleProviderDemo
' Define the types of averaging available in the class
' implementing IConvertible.
Enum AverageType as Short
None = 0
GeometricMean = 1
ArithmeticMean = 2
Median = 3
End Enum
' Pass an instance of this class to methods that require an
' IFormatProvider. The class instance determines the type of
' average to calculate.
Public Class AverageInfo
Implements IFormatProvider
Protected AvgType As AverageType
' Specify the type of averaging in the constructor.
Public Sub New( avgType As AverageType )
Me.AvgType = avgType
End Sub
' This method returns a reference to the containing object
' if an object of AverageInfo type is requested.
Public Function GetFormat( argType As Type ) As Object _
Implements IFormatProvider.GetFormat
If argType Is GetType( AverageInfo ) Then
Return Me
Else
Return Nothing
End If
End Function
' Use this property to set or get the type of averaging.
Public Property TypeOfAverage( ) As AverageType
Get
Return Me.AvgType
End Get
Set( ByVal value as AverageType )
Me.AvgType = value
End Set
End Property
End Class
' This class encapsulates an array of Double values and implements
' the IConvertible interface. Most of the IConvertible methods
' return an average of the array elements in one of three types:
' arithmetic mean, geometric mean, or median.
Public Class DataSet
Implements IConvertible
Protected data As ArrayList
Protected defaultProvider As AverageInfo
' Construct the object and add an initial list of values.
' Create a default format provider.
Public Sub New( ParamArray values( ) As Double )
data = New ArrayList( values )
defaultProvider = New AverageInfo( _
AverageType.ArithmeticMean )
End Sub
' Add additional values with this method.
Public Function Add( value As Double ) As Integer
data.Add( value )
Return data.Count
End Function
' Get, set, and add values with this indexer property.
Default Public Property Item(index As Integer) As Double
Get
If index >= 0 AndAlso index < data.Count Then
Return System.Convert.ToDouble( data( index ) )
Else
Throw New InvalidOperationException( _
"[DataSet.get] Index out of range." )
End If
End Get
Set
If index >= 0 AndAlso index < data.Count Then
data( index ) = value
ElseIf index = data.Count Then
data.Add( value )
Else
Throw New InvalidOperationException( _
"[DataSet.set] Index out of range." )
End If
End Set
End Property
' This property returns the number of elements in the object.
Public ReadOnly Property Count( ) As Integer
Get
Return data.Count
End Get
End Property
' This method calculates the average of the object's elements.
Protected Function Average( ByVal avgType As AverageType ) As Double
Dim SumProd As Double
Dim Index As Integer
If data.Count = 0 Then Return 0.0
Select Case avgType
Case AverageType.GeometricMean
SumProd = 1.0
For Index = 0 To data.Count - 1
SumProd *= data( Index )
Next Index
' This calculation will not fail with negative
' elements.
Return Math.Sign( SumProd ) * Math.Pow( _
Math.Abs( SumProd ), 1.0 / data.Count )
Case AverageType.ArithmeticMean
SumProd = 0.0
For Index = 0 To data.Count - 1
SumProd += data( Index )
Next Index
Return SumProd / data.Count
Case AverageType.Median
If data.Count Mod 2 = 0 Then
Return ( data( data.Count \ 2 ) + _
data( data.Count \ 2 - 1 ) ) / 2.0
Else
Return data( data.Count \ 2 )
End If
End Select
End Function
' Get the AverageInfo object from the caller's format
' provider, or use the local default.
Protected Function GetAverageInfo( _
provider As IFormatProvider ) As AverageInfo
Dim avgInfo As AverageInfo = Nothing
If Not provider Is Nothing Then
avgInfo = provider.GetFormat( GetType( AverageInfo ) )
End If
Return IIf( avgInfo Is Nothing, defaultProvider, avgInfo )
End Function
' Calculate the average and limit the range.
Protected Function CalcNLimitAverage( min As Double, _
max As Double, provider as IFormatProvider ) As Double
' Get the format provider and calculate the average.
Dim avgInfo As AverageInfo = GetAverageInfo( provider )
Dim avg As Double = Average( avgInfo.TypeOfAverage )
' Limit the range, based on the minimum and maximum values
' for the type.
Return IIf( avg > max, max, IIf( avg < min, min, avg ) )
End Function
' The following elements are required by IConvertible.
' None of these conversion functions throw exceptions. When
' the data is out of range for the type, the appropriate
' MinValue or MaxValue is used.
Public Function GetTypeCode( ) As TypeCode _
Implements IConvertible.GetTypeCode
Return TypeCode.Object
End Function
Function ToBoolean( ByVal provider As IFormatProvider ) As _
Boolean Implements IConvertible.ToBoolean
' ToBoolean is false if the dataset is empty.
If data.Count <= 0 Then
Return False
' For median averaging, ToBoolean is true if any
' non-discarded elements are nonzero.
ElseIf AverageType.Median = _
GetAverageInfo( provider ).TypeOfAverage Then
If data.Count Mod 2 = 0 Then
Return ( data( data.Count \ 2 ) <> 0.0 Or _
data( data.Count \ 2 - 1 ) <> 0.0 )
Else
Return data( data.Count \ 2 ) <> 0.0
End If
' For arithmetic or geometric mean averaging, ToBoolean is
' true if any element of the dataset is nonzero.
Else
Dim Index As Integer
For Index = 0 To data.Count - 1
If data( Index ) <> 0.0 Then Return True
Next Index
Return False
End If
End Function
Function ToByte( ByVal provider As IFormatProvider ) As Byte _
Implements IConvertible.ToByte
Return Convert.ToByte( CalcNLimitAverage( _
Byte.MinValue, Byte.MaxValue, provider ) )
End Function
Function ToChar( ByVal provider As IFormatProvider ) As Char _
Implements IConvertible.ToChar
Return Convert.ToChar( Convert.ToUInt16( _
CalcNLimitAverage( 0.0, &HFFFF, provider ) ) )
End Function
' Convert to DateTime by adding the calculated average as
' seconds to the current date and time. A valid DateTime is
' always returned.
Function ToDateTime( ByVal provider As IFormatProvider ) As _
DateTime Implements IConvertible.ToDateTime
Dim seconds As Double = Average( _
GetAverageInfo( provider ).TypeOfAverage )
Try
Return DateTime.Now.AddSeconds( seconds )
Catch ex As ArgumentOutOfRangeException
Return IIf( seconds < 0.0, DateTime.MinValue, _
DateTime.MaxValue )
End Try
End Function
Function ToDecimal( ByVal provider As IFormatProvider ) As _
Decimal Implements IConvertible.ToDecimal
' The Double conversion rounds Decimal.MinValue and
' Decimal.MaxValue to invalid Decimal values, so the
' following limits must be used.
Return Convert.ToDecimal( CalcNLimitAverage( _
-79228162514264330000000000000.0, _
79228162514264330000000000000.0, provider ) )
End Function
Function ToDouble( ByVal provider As IFormatProvider) As _
Double Implements IConvertible.ToDouble
Return Average( GetAverageInfo( provider ).TypeOfAverage )
End Function
Function ToInt16( ByVal provider As IFormatProvider ) As _
Short Implements IConvertible.ToInt16
Return Convert.ToInt16( CalcNLimitAverage( _
Int16.MinValue, Int16.MaxValue, provider ) )
End Function
Function ToInt32( ByVal provider As IFormatProvider ) As _
Integer Implements IConvertible.ToInt32
Return Convert.ToInt32( CalcNLimitAverage( _
Int32.MinValue, Int32.MaxValue, provider ) )
End Function
Function ToInt64( ByVal provider As IFormatProvider ) As Long _
Implements IConvertible.ToInt64
' The Double conversion rounds Int64.MinValue and
' Int64.MaxValue to invalid Long values, so the following
' limits must be used.
Return Convert.ToInt64( CalcNLimitAverage( _
-9223372036854775000, 9223372036854775000, provider ) )
End Function
Function ToSByte( ByVal provider As IFormatProvider ) As _
SByte Implements IConvertible.ToSByte
' SByte.MinValue and SByte.MaxValue are not defined in
' Visual Basic.
Return Convert.ToSByte( CalcNLimitAverage( _
-128, 127, provider ) )
End Function
Function ToSingle( ByVal provider As IFormatProvider ) As _
Single Implements IConvertible.ToSingle
Return Convert.ToSingle( CalcNLimitAverage( _
Single.MinValue, Single.MaxValue, provider ) )
End Function
Function ToUInt16( ByVal provider As IFormatProvider ) As _
UInt16 Implements IConvertible.ToUInt16
' UInt16.MinValue and UInt16.MaxValue are not defined in
' Visual Basic.
Return Convert.ToUInt16( CalcNLimitAverage( _
0, &HFFFF, provider ) )
End Function
Function ToUInt32( ByVal provider As IFormatProvider ) As _
UInt32 Implements IConvertible.ToUInt32
' UInt32.MinValue and UInt32.MaxValue are not defined in
' Visual Basic.
Return Convert.ToUInt32( CalcNLimitAverage( _
0, 4294967295, provider ) )
End Function
Function ToUInt64( ByVal provider As IFormatProvider ) As _
UInt64 Implements IConvertible.ToUInt64
' UInt64.MinValue and UInt64.MaxValue are not defined in
' Visual Basic. The Double conversion would have rounded
' UInt64.MaxValue, so the following limit must be used.
Return Convert.ToUInt64( CalcNLimitAverage( _
0, 18446744073709550000.0, provider ) )
End Function
Function ToType( ByVal conversionType As Type, _
ByVal provider As IFormatProvider) As Object _
Implements IConvertible.ToType
Return Convert.ChangeType( Average( GetAverageInfo( _
provider ).TypeOfAverage ), conversionType )
End Function
Overloads Function ToString( ByVal provider As IFormatProvider _
) As String Implements IConvertible.ToString
Dim avgType as AverageType = _
GetAverageInfo( provider ).TypeOfAverage
Return String.Format( "( {0}: {1:G10} )", avgType, _
Average( avgType ) )
End Function
End Class
' Display a DataSet with three different format providers.
Sub DisplayDataSet( ds As DataSet )
Dim fmt As String = "{0,-12}{1,20}{2,20}{3,20}"
Dim median As AverageInfo = New AverageInfo( AverageType.Median )
Dim geMean As AverageInfo = _
New AverageInfo( AverageType.GeometricMean )
Dim iX As Integer
' Display the dataset elements.
If ds.Count > 0 Then
Console.Write( vbCrLf & "DataSet: [{0}", ds( 0 ) )
For iX = 1 To ds.Count - 1
Console.Write( ", {0}", ds( iX ) )
Next iX
Console.WriteLine( "]" & vbCrLf )
End If
Console.WriteLine( fmt, "Convert.", "Default", _
"Geometric Mean", "Median" )
Console.WriteLine( fmt, "--------", "-------", _
"--------------", "------" )
Console.WriteLine( fmt, "ToBoolean", _
Convert.ToBoolean( ds, Nothing ), _
Convert.ToBoolean( ds, geMean ), _
Convert.ToBoolean( ds, median ) )
Console.WriteLine( fmt, "ToByte", _
Convert.ToByte( ds, Nothing ), _
Convert.ToByte( ds, geMean ), _
Convert.ToByte( ds, median ) )
Console.WriteLine( fmt, "ToChar", _
Convert.ToChar( ds, Nothing ), _
Convert.ToChar( ds, geMean ), _
Convert.ToChar( ds, median ) )
Console.WriteLine( "{0,-12}{1,20:yyyy-MM-dd HH:mm:ss}" & _
"{2,20:yyyy-MM-dd HH:mm:ss}{3,20:yyyy-MM-dd HH:mm:ss}", _
"ToDateTime", Convert.ToDateTime( ds, Nothing ), _
Convert.ToDateTime( ds, geMean ), _
Convert.ToDateTime( ds, median ) )
Console.WriteLine( fmt, "ToDecimal", _
Convert.ToDecimal( ds, Nothing ), _
Convert.ToDecimal( ds, geMean ), _
Convert.ToDecimal( ds, median ) )
Console.WriteLine( fmt, "ToDouble", _
Convert.ToDouble( ds, Nothing ), _
Convert.ToDouble( ds, geMean ), _
Convert.ToDouble( ds, median ) )
Console.WriteLine( fmt, "ToInt16", _
Convert.ToInt16( ds, Nothing ), _
Convert.ToInt16( ds, geMean ), _
Convert.ToInt16( ds, median ) )
Console.WriteLine( fmt, "ToInt32", _
Convert.ToInt32( ds, Nothing ), _
Convert.ToInt32( ds, geMean ), _
Convert.ToInt32( ds, median ) )
Console.WriteLine( fmt, "ToInt64", _
Convert.ToInt64( ds, Nothing ), _
Convert.ToInt64( ds, geMean ), _
Convert.ToInt64( ds, median ) )
Console.WriteLine( fmt, "ToSByte", _
Convert.ToSByte( ds, Nothing ), _
Convert.ToSByte( ds, geMean ), _
Convert.ToSByte( ds, median ) )
Console.WriteLine( fmt, "ToSingle", _
Convert.ToSingle( ds, Nothing ), _
Convert.ToSingle( ds, geMean ), _
Convert.ToSingle( ds, median ) )
Console.WriteLine( fmt, "ToUInt16", _
Convert.ToUInt16( ds, Nothing ), _
Convert.ToUInt16( ds, geMean ), _
Convert.ToUInt16( ds, median ) )
Console.WriteLine( fmt, "ToUInt32", _
Convert.ToUInt32( ds, Nothing ), _
Convert.ToUInt32( ds, geMean ), _
Convert.ToUInt32( ds, median ) )
Console.WriteLine( fmt, "ToUInt64", _
Convert.ToUInt64( ds, Nothing ), _
Convert.ToUInt64( ds, geMean ), _
Convert.ToUInt64( ds, median ) )
End Sub
Sub Main( )
Console.WriteLine( _
"This example of the Convert.To<Type>( Object, " & _
"IFormatProvider ) methods " & vbCrLf & "generates " & _
"the following output. The example displays the " & _
"values " & vbCrLf & "returned by the methods, " & _
"using several IFormatProvider objects." & vbCrLf )
Dim ds1 As New DataSet( 10.5, 22.2, 45.9, 88.7, 156.05, 297.6 )
DisplayDataSet( ds1 )
Dim ds2 As New DataSet( _
359999.95, 425000, 499999.5, 775000, 1695000 )
DisplayDataSet( ds2 )
End Sub
End Module
' This example of the Convert.To<Type>( Object, IFormatProvider ) methods
' generates the following output. The example displays the values
' returned by the methods, using several IFormatProvider objects.
'
' DataSet: [10.5, 22.2, 45.9, 88.7, 156.05, 297.6]
'
' Convert. Default Geometric Mean Median
' -------- ------- -------------- ------
' ToBoolean True True True
' ToByte 103 59 67
' ToChar g ; C
' ToDateTime 2003-05-13 14:52:53 2003-05-13 14:52:09 2003-05-13 14:52:17
' ToDecimal 103.491666666667 59.4332135445164 67.3
' ToDouble 103.491666666667 59.4332135445164 67.3
' ToInt16 103 59 67
' ToInt32 103 59 67
' ToInt64 103 59 67
' ToSByte 103 59 67
' ToSingle 103.4917 59.43321 67.3
' ToUInt16 103 59 67
' ToUInt32 103 59 67
' ToUInt64 103 59 67
'
' DataSet: [359999.95, 425000, 499999.5, 775000, 1695000]
'
' Convert. Default Geometric Mean Median
' -------- ------- -------------- ------
' ToBoolean True True True
' ToByte 255 255 255
' ToChar ? ? ?
' ToDateTime 2003-05-22 07:27:49 2003-05-20 22:17:27 2003-05-19 09:44:29
' ToDecimal 750999.89 631577.237188435 499999.5
' ToDouble 750999.89 631577.237188435 499999.5
' ToInt16 32767 32767 32767
' ToInt32 751000 631577 500000
' ToInt64 751000 631577 500000
' ToSByte 127 127 127
' ToSingle 750999.9 631577.3 499999.5
' ToUInt16 65535 65535 65535
' ToUInt32 751000 631577 500000
' ToUInt64 751000 631577 500000
Hinweise
provider ermöglicht es dem Benutzer, kulturspezifische Konvertierungsinformationen zum Inhalt von valueanzugeben. Wenn es sich value z. B. um eine String Zahl handelt, könnte sie kulturspezifische Informationen über die Notation bereitstellen, provider die zur Darstellung dieser Zahl verwendet wird.
Die Basistypen ignorieren provider. Der Parameter kann jedoch verwendet werden, wenn es sich um value einen benutzerdefinierten Typ handelt, der die IConvertible Schnittstelle implementiert.
Gilt für:
ToInt16(UInt64)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Wichtig
Diese API ist nicht CLS-kompatibel.
Konvertiert den Wert der angegebenen 64-Bit-Ganzzahl ohne Vorzeichen in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::UInt64 value);[System.CLSCompliant(false)]
public static short ToInt16 (ulong value);[<System.CLSCompliant(false)>]
static member ToInt16 : uint64 -> int16Public Shared Function ToInt16 (value As ULong) As ShortParameter
- value
- UInt64
Die zu konvertierende 64-Bit-Ganzzahl ohne Vorzeichen.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die value entspricht.
- Attribute
Ausnahmen
value ist größer als Int16.MaxValue.
Beispiele
Im folgenden Beispiel wird versucht, jedes Element in einem Array von langen ganzzahligen Zahlen ohne Vorzeichen in eine 16-Bit-Ganzzahl mit Vorzeichen zu konvertieren.
ulong[] numbers = { UInt64.MinValue, 121, 340, UInt64.MaxValue };
short result;
foreach (ulong number in numbers)
{
try {
result = Convert.ToInt16(number);
Console.WriteLine("Converted the {0} value {1} to a {2} value {3}.",
number.GetType().Name, number,
result.GetType().Name, result);
}
catch (OverflowException) {
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.",
number.GetType().Name, number);
}
}
// The example displays the following output:
// Converted the UInt64 value 0 to a Int16 value 0.
// Converted the UInt64 value 121 to a Int16 value 121.
// Converted the UInt64 value 340 to a Int16 value 340.
// The UInt64 value 18446744073709551615 is outside the range of the Int16 type.
let numbers =
[| UInt64.MinValue; 121uL; 340uL; UInt64.MaxValue |]
for number in numbers do
try
let result = Convert.ToInt16 number
printfn $"Converted the {number.GetType().Name} value {number} to a {result.GetType().Name} value {result}."
with :? OverflowException ->
printfn $"The {number.GetType().Name} value {number} is outside the range of the Int16 type."
// The example displays the following output:
// Converted the UInt64 value 0 to a Int16 value 0.
// Converted the UInt64 value 121 to a Int16 value 121.
// Converted the UInt64 value 340 to a Int16 value 340.
// The UInt64 value 18446744073709551615 is outside the range of the Int16 type.
Dim numbers() As ULong = { UInt64.MinValue, 121, 340, UInt64.MaxValue }
Dim result As Short
For Each number As ULong In numbers
Try
result = Convert.ToInt16(number)
Console.WriteLine("Converted the {0} value {1} to a {2} value {3}.", _
number.GetType().Name, number, _
result.GetType().Name, result)
Catch e As OverflowException
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.", _
number.GetType().Name, number)
End Try
Next
' The example displays the following output:
' Converted the UInt64 value 0 to a Int16 value 0.
' Converted the UInt64 value 121 to a Int16 value 121.
' Converted the UInt64 value 340 to a Int16 value 340.
' The UInt64 value 18446744073709551615 is outside the range of the Int16 type.
Gilt für:
ToInt16(UInt32)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Wichtig
Diese API ist nicht CLS-kompatibel.
Konvertiert den Wert der angegebenen 32-Bit-Ganzzahl ohne Vorzeichen in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::UInt32 value);[System.CLSCompliant(false)]
public static short ToInt16 (uint value);[<System.CLSCompliant(false)>]
static member ToInt16 : uint32 -> int16Public Shared Function ToInt16 (value As UInteger) As ShortParameter
- value
- UInt32
Die zu konvertierende 32-Bit-Ganzzahl ohne Vorzeichen.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die value entspricht.
- Attribute
Ausnahmen
value ist größer als Int16.MaxValue.
Beispiele
Im folgenden Beispiel wird versucht, jedes Element in einem Array von ganzzahligen Zahlen ohne Vorzeichen in eine 16-Bit-Ganzzahl mit Vorzeichen zu konvertieren.
uint[] numbers = { UInt32.MinValue, 121, 340, UInt32.MaxValue };
short result;
foreach (uint number in numbers)
{
try {
result = Convert.ToInt16(number);
Console.WriteLine("Converted the {0} value {1} to a {2} value {3}.",
number.GetType().Name, number,
result.GetType().Name, result);
}
catch (OverflowException) {
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.",
number.GetType().Name, number);
}
}
// The example displays the following output:
// Converted the UInt32 value 0 to a Int16 value 0.
// Converted the UInt32 value 121 to a Int16 value 121.
// Converted the UInt32 value 340 to a Int16 value 340.
// The UInt32 value 4294967295 is outside the range of the Int16 type.
let numbers =
[| UInt32.MinValue; 121u; 340u; UInt32.MaxValue |]
for number in numbers do
try
let result = Convert.ToInt16 number
printfn $"Converted the {number.GetType().Name} value {number} to a {result.GetType().Name} value {result}."
with :? OverflowException ->
printfn $"The {number.GetType().Name} value {number} is outside the range of the Int16 type."
// The example displays the following output:
// Converted the UInt32 value 0 to a Int16 value 0.
// Converted the UInt32 value 121 to a Int16 value 121.
// Converted the UInt32 value 340 to a Int16 value 340.
// The UInt32 value 4294967295 is outside the range of the Int16 type.
Dim numbers() As UInteger = { UInt32.MinValue, 121, 340, UInt32.MaxValue }
Dim result As Short
For Each number As UInteger In numbers
Try
result = Convert.ToInt16(number)
Console.WriteLine("Converted the {0} value {1} to a {2} value {3}.", _
number.GetType().Name, number, _
result.GetType().Name, result)
Catch e As OverflowException
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.", _
number.GetType().Name, number)
End Try
Next
' The example displays the following output:
' Converted the UInt32 value 0 to a Int16 value 0.
' Converted the UInt32 value 121 to a Int16 value 121.
' Converted the UInt32 value 340 to a Int16 value 340.
' The UInt32 value 4294967295 is outside the range of the Int16 type.
Gilt für:
ToInt16(UInt16)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Wichtig
Diese API ist nicht CLS-kompatibel.
Konvertiert den Wert der angegebenen 16-Bit-Ganzzahl ohne Vorzeichen in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::UInt16 value);[System.CLSCompliant(false)]
public static short ToInt16 (ushort value);[<System.CLSCompliant(false)>]
static member ToInt16 : uint16 -> int16Public Shared Function ToInt16 (value As UShort) As ShortParameter
- value
- UInt16
Die zu konvertierende 16-Bit-Ganzzahl ohne Vorzeichen.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die value entspricht.
- Attribute
Ausnahmen
value ist größer als Int16.MaxValue.
Beispiele
Im folgenden Beispiel wird versucht, jedes Element in einem Array von unsignierten 16-Bit-Ganzzahlen in eine 16-Bit-Ganzzahl mit Vorzeichen zu konvertieren.
ushort[] numbers = { UInt16.MinValue, 121, 340, UInt16.MaxValue };
short result;
foreach (ushort number in numbers)
{
try {
result = Convert.ToInt16(number);
Console.WriteLine("Converted the {0} value {1} to a {2} value {3}.",
number.GetType().Name, number,
result.GetType().Name, result);
}
catch (OverflowException) {
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.",
number.GetType().Name, number);
}
}
// The example displays the following output:
// Converted the UInt16 value 0 to a Int16 value 0.
// Converted the UInt16 value 121 to a Int16 value 121.
// Converted the UInt16 value 340 to a Int16 value 340.
// The UInt16 value 65535 is outside the range of the Int16 type.
let numbers =
[| UInt16.MinValue; 121us; 340us; UInt16.MaxValue |]
for number in numbers do
try
let result = Convert.ToInt16 number
printfn $"Converted the {number.GetType().Name} value {number} to a {result.GetType().Name} value {result}."
with :? OverflowException ->
printfn $"The {number.GetType().Name} value {number} is outside the range of the Int16 type."
// The example displays the following output:
// Converted the UInt16 value 0 to a Int16 value 0.
// Converted the UInt16 value 121 to a Int16 value 121.
// Converted the UInt16 value 340 to a Int16 value 340.
// The UInt16 value 65535 is outside the range of the Int16 type.
Dim numbers() As UShort = { UInt16.MinValue, 121, 340, UInt16.MaxValue }
Dim result As Short
For Each number As UShort In numbers
Try
result = Convert.ToInt16(number)
Console.WriteLine("Converted the {0} value {1} to a {2} value {3}.", _
number.GetType().Name, number, _
result.GetType().Name, result)
Catch e As OverflowException
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.", _
number.GetType().Name, number)
End Try
Next
' The example displays the following output:
' Converted the UInt16 value 0 to a Int16 value 0.
' Converted the UInt16 value 121 to a Int16 value 121.
' Converted the UInt16 value 340 to a Int16 value 340.
' The UInt16 value 65535 is outside the range of the Int16 type.
Gilt für:
ToInt16(String)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert die angegebene Zeichenfolgendarstellung einer Zahl in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::String ^ value);public static short ToInt16 (string value);public static short ToInt16 (string? value);static member ToInt16 : string -> int16Public Shared Function ToInt16 (value As String) As ShortParameter
- value
- String
Eine Zeichenfolge, die die zu konvertierende Zahl enthält.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die der Zahl in value entspricht, oder 0 (null), wenn value gleich null ist.
Ausnahmen
value besteht nicht aus einem optionalen Vorzeichen und einer Folge von Ziffern (0 bis 9).
value stellt eine Zahl dar, die kleiner als Int16.MinValue oder größer als Int16.MaxValue ist.
Beispiele
Im folgenden Beispiel werden Zeichenfolgendarstellungen von 16-Bit-Ganzzahlen mit der -Methode mithilfe der ToInt16 Standardformatierung konvertiert.
// Example of the Convert::ToInt16( String* ) and
// Convert::ToInt16( String*, IFormatProvider* ) methods.
using namespace System;
using namespace System::Globalization;
const __wchar_t * protoFmt = L"{0,-20}{1,-20}{2}";
// Get the exception type name; remove the namespace prefix.
String^ GetExceptionType( Exception^ ex )
{
String^ exceptionType = ex->GetType()->ToString();
return exceptionType->Substring( exceptionType->LastIndexOf( '.' ) + 1 );
}
void ConvertToInt16( String^ numericStr, IFormatProvider^ provider )
{
Object^ defaultValue;
Object^ providerValue;
// Convert numericStr to Int16 without a format provider.
try
{
defaultValue = Convert::ToInt16( numericStr );
}
catch ( Exception^ ex )
{
defaultValue = GetExceptionType( ex );
}
// Convert numericStr to Int16 with a format provider.
try
{
providerValue = Convert::ToInt16( numericStr, provider );
}
catch ( Exception^ ex )
{
providerValue = GetExceptionType( ex );
}
Console::WriteLine( gcnew String( protoFmt ), numericStr, defaultValue, providerValue );
}
int main()
{
// Create a NumberFormatInfo object and set several of its
// properties that apply to numbers.
NumberFormatInfo^ provider = gcnew NumberFormatInfo;
// These properties affect the conversion.
provider->NegativeSign = "neg ";
provider->PositiveSign = "pos ";
// These properties do not affect the conversion.
// The input string cannot have decimal and group separators.
provider->NumberDecimalSeparator = ".";
provider->NumberGroupSeparator = ",";
array<Int32>^sizes = {3};
provider->NumberGroupSizes = sizes;
provider->NumberNegativePattern = 0;
Console::WriteLine( "This example of\n"
" Convert::ToInt16( String* ) and \n"
" Convert::ToInt16( String*, IFormatProvider* ) "
"\ngenerates the following output. It converts "
"several strings to \nshort values, using "
"default formatting or a NumberFormatInfo object.\n" );
Console::WriteLine( gcnew String( protoFmt ), "String to convert", "Default/exception", "Provider/exception" );
Console::WriteLine( gcnew String( protoFmt ), "-----------------", "-----------------", "------------------" );
// Convert strings, with and without an IFormatProvider.
ConvertToInt16( "12345", provider );
ConvertToInt16( "+12345", provider );
ConvertToInt16( "pos 12345", provider );
ConvertToInt16( "-12345", provider );
ConvertToInt16( "neg 12345", provider );
ConvertToInt16( "12345.", provider );
ConvertToInt16( "12,345", provider );
ConvertToInt16( "(12345)", provider );
ConvertToInt16( "32768", provider );
ConvertToInt16( "-32769", provider );
}
/*
This example of
Convert::ToInt16( String* ) and
Convert::ToInt16( String*, IFormatProvider* )
generates the following output. It converts several strings to
short values, using default formatting or a NumberFormatInfo object.
String to convert Default/exception Provider/exception
----------------- ----------------- ------------------
12345 12345 12345
+12345 12345 FormatException
pos 12345 FormatException 12345
-12345 -12345 FormatException
neg 12345 FormatException -12345
12345. FormatException FormatException
12,345 FormatException FormatException
(12345) FormatException FormatException
32768 OverflowException OverflowException
-32769 OverflowException FormatException
*/
// Example of the Convert.ToInt16( string ) and
// Convert.ToInt16( string, IFormatProvider ) methods.
using System;
using System.Globalization;
class ToInt16ProviderDemo
{
static string format = "{0,-20}{1,-20}{2}";
// Get the exception type name; remove the namespace prefix.
static string GetExceptionType( Exception ex )
{
string exceptionType = ex.GetType( ).ToString( );
return exceptionType.Substring(
exceptionType.LastIndexOf( '.' ) + 1 );
}
static void ConvertToInt16( string numericStr,
IFormatProvider provider )
{
object defaultValue;
object providerValue;
// Convert numericStr to Int16 without a format provider.
try
{
defaultValue = Convert.ToInt16( numericStr );
}
catch( Exception ex )
{
defaultValue = GetExceptionType( ex );
}
// Convert numericStr to Int16 with a format provider.
try
{
providerValue = Convert.ToInt16( numericStr, provider );
}
catch( Exception ex )
{
providerValue = GetExceptionType( ex );
}
Console.WriteLine( format, numericStr,
defaultValue, providerValue );
}
public static void Main( )
{
// Create a NumberFormatInfo object and set several of its
// properties that apply to numbers.
NumberFormatInfo provider = new NumberFormatInfo();
// These properties affect the conversion.
provider.NegativeSign = "neg ";
provider.PositiveSign = "pos ";
// These properties do not affect the conversion.
// The input string cannot have decimal and group separators.
provider.NumberDecimalSeparator = ".";
provider.NumberGroupSeparator = ",";
provider.NumberGroupSizes = new int[ ] { 3 };
provider.NumberNegativePattern = 0;
Console.WriteLine("This example of\n" +
" Convert.ToInt16( string ) and \n" +
" Convert.ToInt16( string, IFormatProvider ) " +
"\ngenerates the following output. It converts " +
"several strings to \nshort values, using " +
"default formatting or a NumberFormatInfo object.\n" );
Console.WriteLine( format, "String to convert",
"Default/exception", "Provider/exception" );
Console.WriteLine( format, "-----------------",
"-----------------", "------------------" );
// Convert strings, with and without an IFormatProvider.
ConvertToInt16( "12345", provider );
ConvertToInt16( "+12345", provider );
ConvertToInt16( "pos 12345", provider );
ConvertToInt16( "-12345", provider );
ConvertToInt16( "neg 12345", provider );
ConvertToInt16( "12345.", provider );
ConvertToInt16( "12,345", provider );
ConvertToInt16( "(12345)", provider );
ConvertToInt16( "32768", provider );
ConvertToInt16( "-32769", provider );
}
}
/*
This example of
Convert.ToInt16( string ) and
Convert.ToInt16( string, IFormatProvider )
generates the following output. It converts several strings to
short values, using default formatting or a NumberFormatInfo object.
String to convert Default/exception Provider/exception
----------------- ----------------- ------------------
12345 12345 12345
+12345 12345 FormatException
pos 12345 FormatException 12345
-12345 -12345 FormatException
neg 12345 FormatException -12345
12345. FormatException FormatException
12,345 FormatException FormatException
(12345) FormatException FormatException
32768 OverflowException OverflowException
-32769 OverflowException FormatException
*/
// Example of the Convert.ToInt16( string ) and
// Convert.ToInt16( string, IFormatProvider ) methods.
open System
open System.Globalization
let format obj1 obj2 obj3 = printfn $"{obj1,-20}{obj2,-20}{obj3}"
// Get the exception type name; remove the namespace prefix.
let getExceptionType (ex: exn) =
let exceptionType = ex.GetType() |> string
exceptionType.Substring(exceptionType.LastIndexOf '.' + 1)
let convertToInt16 (numericStr: string) (provider: IFormatProvider) =
// Convert numericStr to Int16 without a format provider.
let defaultValue =
try
Convert.ToInt16 numericStr
|> string
with ex ->
getExceptionType ex
// Convert numericStr to Int16 with a format provider.
let providerValue =
try
Convert.ToInt16(numericStr, provider)
|> string
with ex ->
getExceptionType ex
format numericStr defaultValue providerValue
// Create a NumberFormatInfo object and set several of its
// properties that apply to numbers.
let provider = NumberFormatInfo()
// These properties affect the conversion.
provider.NegativeSign <- "neg "
provider.PositiveSign <- "pos "
// These properties do not affect the conversion.
// The input string cannot have decimal and group separators.
provider.NumberDecimalSeparator <- "."
provider.NumberGroupSeparator <- ","
provider.NumberGroupSizes <- [| 3 |]
provider.NumberNegativePattern <- 0
printfn
"""This example of
Convert.ToInt16( string ) and
Convert.ToInt16( string, IFormatProvider )
generates the following output. It converts several strings to
short values, using default formatting or a NumberFormatInfo object.
"""
format "String to convert" "Default/exception" "Provider/exception"
format "-----------------" "-----------------" "------------------"
// Convert strings, with and without an IFormatProvider.
convertToInt16 "12345" provider
convertToInt16 "+12345" provider
convertToInt16 "pos 12345" provider
convertToInt16 "-12345" provider
convertToInt16 "neg 12345" provider
convertToInt16 "12345." provider
convertToInt16 "12,345" provider
convertToInt16 "(12345)" provider
convertToInt16 "32768" provider
convertToInt16 "-32769" provider
// This example of
// Convert.ToInt16( string ) and
// Convert.ToInt16( string, IFormatProvider )
// generates the following output. It converts several strings to
// short values, using default formatting or a NumberFormatInfo object.
//
// String to convert Default/exception Provider/exception
// ----------------- ----------------- ------------------
// 12345 12345 12345
// +12345 12345 FormatException
// pos 12345 FormatException 12345
// -12345 -12345 FormatException
// neg 12345 FormatException -12345
// 12345. FormatException FormatException
// 12,345 FormatException FormatException
// (12345) FormatException FormatException
// 32768 OverflowException OverflowException
// -32769 OverflowException FormatException
' Example of the Convert.ToInt16( String ) and
' Convert.ToInt16( String, IFormatProvider ) methods.
Imports System.Globalization
Module ToInt16ProviderDemo
Dim format As String = "{0,-20}{1,-20}{2}"
' Get the exception type name; remove the namespace prefix.
Function GetExceptionType( ex As Exception ) As String
Dim exceptionType As String = ex.GetType( ).ToString( )
Return exceptionType.Substring( _
exceptionType.LastIndexOf( "."c ) + 1 )
End Function
Sub ConvertToInt16( numericStr As String, _
provider As IFormatProvider )
Dim defaultValue As Object
Dim providerValue As Object
' Convert numericStr to Int16 without a format provider.
Try
defaultValue = Convert.ToInt16( numericStr )
Catch ex As Exception
defaultValue = GetExceptionType( ex )
End Try
' Convert numericStr to Int16 with a format provider.
Try
providerValue = Convert.ToInt16( numericStr, provider )
Catch ex As Exception
providerValue = GetExceptionType( ex )
End Try
Console.WriteLine( format, numericStr, _
defaultValue, providerValue )
End Sub
Sub Main( )
' Create a NumberFormatInfo object and set several of its
' properties that apply to numbers.
Dim provider As NumberFormatInfo = new NumberFormatInfo( )
' These properties affect the conversion.
provider.NegativeSign = "neg "
provider.PositiveSign = "pos "
' These properties do not affect the conversion.
' The input string cannot have decimal and group separators.
provider.NumberDecimalSeparator = "."
provider.NumberGroupSeparator = ","
provider.NumberGroupSizes = New Integer( ) { 3 }
provider.NumberNegativePattern = 0
Console.WriteLine( "This example of" & vbCrLf & _
" Convert.ToInt16( String ) and " & vbCrLf & _
" Convert.ToInt16( String, IFormatProvider ) " & _
vbCrLf & "generates the following output. It " & _
"converts several strings to " & vbCrLf & "Short " & _
"values, using default formatting " & _
"or a NumberFormatInfo object." & vbCrLf )
Console.WriteLine( format, "String to convert", _
"Default/exception", "Provider/exception" )
Console.WriteLine( format, "-----------------", _
"-----------------", "------------------" )
' Convert strings, with and without an IFormatProvider.
ConvertToInt16( "12345", provider )
ConvertToInt16( "+12345", provider )
ConvertToInt16( "pos 12345", provider )
ConvertToInt16( "-12345", provider )
ConvertToInt16( "neg 12345", provider )
ConvertToInt16( "12345.", provider )
ConvertToInt16( "12,345", provider )
ConvertToInt16( "(12345)", provider )
ConvertToInt16( "32768", provider )
ConvertToInt16( "-32769", provider )
End Sub
End Module
' This example of
' Convert.ToInt16( String ) and
' Convert.ToInt16( String, IFormatProvider )
' generates the following output. It converts several strings to
' Short values, using default formatting or a NumberFormatInfo object.
'
' String to convert Default/exception Provider/exception
' ----------------- ----------------- ------------------
' 12345 12345 12345
' +12345 12345 FormatException
' pos 12345 FormatException 12345
' -12345 -12345 FormatException
' neg 12345 FormatException -12345
' 12345. FormatException FormatException
' 12,345 FormatException FormatException
' (12345) FormatException FormatException
' 32768 OverflowException OverflowException
' -32769 OverflowException FormatException
Hinweise
Die Verwendung der ToInt16(String) -Methode entspricht der Übergabe value an die Int16.Parse(String) -Methode.
value wird mithilfe der Formatierungskonventionen der aktuellen Kultur interpretiert.
Wenn Sie es vorziehen, keine Ausnahme zu behandeln, wenn die Konvertierung fehlschlägt, können Sie stattdessen die Int16.TryParse -Methode aufrufen. Es gibt einen Boolean Wert zurück, der angibt, ob die Konvertierung erfolgreich war oder fehlgeschlagen ist.
Weitere Informationen
Gilt für:
ToInt16(String, Int32)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert die Zeichenfolgendarstellung einer Zahl in einer angegebenen Basis in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::String ^ value, int fromBase);public static short ToInt16 (string value, int fromBase);public static short ToInt16 (string? value, int fromBase);static member ToInt16 : string * int -> int16Public Shared Function ToInt16 (value As String, fromBase As Integer) As ShortParameter
- value
- String
Eine Zeichenfolge, die die zu konvertierende Zahl enthält.
- fromBase
- Int32
Die Basis der Zahl in value, die 2, 8, 10 oder 16 sein muss.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die der Zahl in value entspricht, oder 0 (null), wenn value gleich null ist.
Ausnahmen
fromBase ist nicht 2, 8, 10 oder 16.
- oder -
value, der eine nicht zur Basis 10 gehörende Zahl mit Vorzeichen darstellt, weist ein negatives Vorzeichen als Präfix auf.
value ist Empty.
value enthält ein Zeichen, das in der von fromBase angegebenen Basis keine gültige Ziffer ist. Die Ausnahmemeldung gibt an, dass keine zu konvertierenden Ziffern vorhanden sind, wenn das erste Zeichen in value ungültig ist. Andernfalls gibt die Meldung an, dass value ungültige nachfolgende Zeichen enthält.
value, der eine nicht zur Basis 10 gehörende Zahl mit Vorzeichen darstellt, weist ein negatives Vorzeichen als Präfix auf.
- oder -
value stellt eine Zahl dar, die kleiner als Int16.MinValue oder größer als Int16.MaxValue ist.
Beispiele
Im folgenden Beispiel wird versucht, jedes Element in einem Zeichenfolgenarray als hexadezimale Zeichenfolge zu interpretieren und in eine 16-Bit-Ganzzahl mit Vorzeichen zu konvertieren.
using System;
public class Example
{
public static void Main()
{
string[] hexStrings = { "8000", "0FFF", "f000", "00A30", "D", "-13",
"9AC61", "GAD" };
foreach (string hexString in hexStrings)
{
try {
short number = Convert.ToInt16(hexString, 16);
Console.WriteLine("Converted '{0}' to {1:N0}.", hexString, number);
}
catch (FormatException) {
Console.WriteLine("'{0}' is not in the correct format for a hexadecimal number.",
hexString);
}
catch (OverflowException) {
Console.WriteLine("'{0}' is outside the range of an Int16.", hexString);
}
catch (ArgumentException) {
Console.WriteLine("'{0}' is invalid in base 16.", hexString);
}
}
}
}
// The example displays the following output:
// Converted '8000' to -32,768.
// Converted '0FFF' to 4,095.
// Converted 'f000' to -4,096.
// Converted '00A30' to 2,608.
// Converted 'D' to 13.
// '-13' is invalid in base 16.
// '9AC61' is outside the range of an Int16.
// 'GAD' is not in the correct format for a hexadecimal number.
open System
let hexStrings =
[| "8000"; "0FFF"; "f000"; "00A30"
"D"; "-13"; "9AC61"; "GAD" |]
for hexString in hexStrings do
try
let number = Convert.ToInt16(hexString, 16)
printfn $"Converted '{hexString}' to {number:N0}."
with
| :? FormatException ->
printfn $"'{hexString}' is not in the correct format for a hexadecimal number."
| :? OverflowException ->
printfn $"'{hexString}' is outside the range of an Int16."
| :? ArgumentException ->
printfn $"'{hexString}' is invalid in base 16."
// The example displays the following output:
// Converted '8000' to -32,768.
// Converted '0FFF' to 4,095.
// Converted 'f000' to -4,096.
// Converted '00A30' to 2,608.
// Converted 'D' to 13.
// '-13' is invalid in base 16.
// '9AC61' is outside the range of an Int16.
// 'GAD' is not in the correct format for a hexadecimal number.
Module Example
Public Sub Main()
Dim hexStrings() As String = { "8000", "0FFF", "f000", "00A30", "D", _
"-13", "9AC61", "GAD" }
For Each hexString As String In hexStrings
Try
Dim number As Short = Convert.ToInt16(hexString, 16)
Console.WriteLine("Converted '{0}' to {1:N0}.", hexString, number)
Catch e As FormatException
Console.WriteLine("'{0}' is not in the correct format for a hexadecimal number.", _
hexString)
Catch e As OverflowException
Console.WriteLine("'{0}' is outside the range of an Int16.", hexString)
Catch e As ArgumentException
Console.WriteLine("'{0}' is invalid in base 16.", hexString)
End Try
Next
End Sub
End Module
' The example displays the following output:
' Converted '8000' to -32,768.
' Converted '0FFF' to 4,095.
' Converted 'f000' to -4,096.
' Converted '00A30' to 2,608.
' Converted 'D' to 13.
' '-13' is invalid in base 16.
' '9AC61' is outside the range of an Int16.
' 'GAD' is not in the correct format for a hexadecimal number.
Hinweise
Wenn fromBase 16 ist, können Sie der vom value Parameter angegebenen Zahl "0x" oder "0X" voranstellen.
Da das negative Vorzeichen für numerische Darstellungen nicht der Basis 10 unterstützt wird, geht die ToInt16(String, Int32) Methode davon aus, dass negative Zahlen die Komplementdarstellung von zwei verwenden. Anders ausgedrückt: Die Methode interpretiert immer das binäre Bit der höchsten Reihenfolge einer ganzen Zahl (Bit 15) als ihr Vorzeichenbit. Daher ist es möglich, Code zu schreiben, in dem eine Nicht-Basis-10-Zahl, die sich außerhalb des Bereichs des Int16 Datentyps befindet, in einen Int16 Wert konvertiert wird, ohne dass die -Methode eine Ausnahme auslöst. Im folgenden Beispiel wird eins inkrementiert Int16.MaxValue , die resultierende Zahl in ihre hexadezimale Zeichenfolgendarstellung konvertiert und dann die ToInt16(String, Int32) -Methode aufgerufen. Anstatt eine Ausnahme auszulösen, zeigt die Methode die Meldung "0x8000 konvertiert in -32768" an.
// Create a hexadecimal value out of range of the Int16 type.
string value = Convert.ToString((int) short.MaxValue + 1, 16);
// Convert it back to a number.
try
{
short number = Convert.ToInt16(value, 16);
Console.WriteLine("0x{0} converts to {1}.", value, number);
}
catch (OverflowException)
{
Console.WriteLine("Unable to convert '0x{0}' to a 16-bit integer.", value);
}
// Create a hexadecimal value out of range of the Int16 type.
let value = Convert.ToString(int Int16.MaxValue + 1, 16)
// Convert it back to a number.
try
let number = Convert.ToInt16(value, 16)
printfn $"0x{value} converts to {number}."
with :? OverflowException ->
printfn $"Unable to convert '0x{value}' to a 16-bit integer."
' Create a hexadecimal value out of range of the Int16 type.
Dim value As String = Convert.ToString(CInt(Short.MaxValue) + 1, 16)
' Convert it back to a number.
Try
Dim number As Short = Convert.ToInt16(value, 16)
Console.WriteLine("0x{0} converts to {1}.", value, number)
Catch e As OverflowException
Console.WriteLine("Unable to convert '0x{0}' to a 16-bit integer.", value)
End Try
Beim Ausführen von binären Vorgängen oder numerischen Konvertierungen liegt es immer in der Verantwortung des Entwicklers, zu überprüfen, ob eine Methode die entsprechende numerische Darstellung verwendet, um einen bestimmten Wert zu interpretieren. Wie das folgende Beispiel veranschaulicht, können Sie sicherstellen, dass die -Methode Überläufe angemessen verarbeitet, indem Sie zuerst das Zeichen des numerischen Werts abrufen, bevor Sie ihn in seine hexadezimale Zeichenfolgendarstellung konvertieren. Lösen Sie eine Ausnahme aus, wenn der ursprüngliche Wert positiv war, die Konvertierung zurück in eine ganze Zahl jedoch einen negativen Wert ergibt.
// Create a hexadecimal value out of range of the Short type.
int sourceNumber = (int) short.MaxValue + 1;
bool isNegative = (Math.Sign(sourceNumber) == -1);
string value = Convert.ToString(sourceNumber, 16);
short targetNumber;
try
{
targetNumber = Convert.ToInt16(value, 16);
if (! isNegative && ((targetNumber & 0x8000) != 0))
throw new OverflowException();
else
Console.WriteLine("0x{0} converts to {1}.", value, targetNumber);
}
catch (OverflowException)
{
Console.WriteLine("Unable to convert '0x{0}' to a 16-bit integer.", value);
}
// Displays the following to the console:
// Unable to convert '0x8000' to a 16-bit integer.
// Create a hexadecimal value out of range of the Short type.
let sourceNumber = int Int16.MaxValue + 1
let isNegative = sign sourceNumber = -1
let value = Convert.ToString(sourceNumber, 16)
try
let targetNumber = Convert.ToInt16(value, 16)
if not isNegative && targetNumber &&& 0x8000s <> 0s then
raise (OverflowException())
else
printfn $"0x{value} converts to {targetNumber}."
with :? OverflowException ->
printfn $"Unable to convert '0x{value}' to a 16-bit integer."
// Displays the following to the console:
// Unable to convert '0x8000' to a 16-bit integer.
' Create a hexadecimal value out of range of the Short type.
Dim sourceNumber As Integer = CInt(Short.MaxValue) + 1
Dim isNegative As Boolean = (Math.Sign(sourceNumber) = -1)
Dim value As String = Convert.ToString(sourceNumber, 16)
Dim targetNumber As Short
Try
targetNumber = Convert.ToInt16(value, 16)
If Not isNegative And ((targetNumber And &H8000) <> 0) Then
Throw New OverflowException()
Else
Console.WriteLine("0x{0} converts to {1}.", value, targetNumber)
End If
Catch e As OverflowException
Console.WriteLine("Unable to convert '0x{0}' to a 16-bit integer.", value)
End Try
' Displays the following to the console:
' Unable to convert '0x8000' to a 16-bit integer.
Gilt für:
ToInt16(SByte)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Wichtig
Diese API ist nicht CLS-kompatibel.
Konvertiert den Wert der angegebenen 8-Bit-Ganzzahl mit Vorzeichen in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::SByte value);[System.CLSCompliant(false)]
public static short ToInt16 (sbyte value);[<System.CLSCompliant(false)>]
static member ToInt16 : sbyte -> int16Public Shared Function ToInt16 (value As SByte) As ShortParameter
- value
- SByte
Die zu konvertierende 8-Bit-Ganzzahl mit Vorzeichen.
Gibt zurück
Eine 8-Bit-Ganzzahl mit Vorzeichen, die value entspricht.
- Attribute
Beispiele
Im folgenden Beispiel wird jedes Element in einem Array von signierten Bytes in eine 16-Bit-Ganzzahl mit Vorzeichen konvertiert.
sbyte[] numbers = { SByte.MinValue, -1, 0, 10, SByte.MaxValue };
short result;
foreach (sbyte number in numbers)
{
result = Convert.ToInt16(number);
Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
number.GetType().Name, number,
result.GetType().Name, result);
}
// The example displays the following output:
// Converted the SByte value -128 to the Int16 value -128.
// Converted the SByte value -1 to the Int16 value -1.
// Converted the SByte value 0 to the Int16 value 0.
// Converted the SByte value 10 to the Int16 value 10.
// Converted the SByte value 127 to the Int16 value 127.
let numbers =
[| SByte.MinValue; -1y; 0y; 10y; SByte.MaxValue |]
for number in numbers do
let result = Convert.ToInt16 number
printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
// The example displays the following output:
// Converted the SByte value -128 to the Int16 value -128.
// Converted the SByte value -1 to the Int16 value -1.
// Converted the SByte value 0 to the Int16 value 0.
// Converted the SByte value 10 to the Int16 value 10.
// Converted the SByte value 127 to the Int16 value 127.
Dim numbers() As SByte = { SByte.MinValue, -1, 0, 10, SByte.MaxValue }
Dim result As Short
For Each number As SByte In numbers
result = Convert.ToInt16(number)
Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
number.GetType().Name, number, _
result.GetType().Name, result)
Next
' The example displays the following output:
' Converted the SByte value -128 to the Int16 value -128.
' Converted the SByte value -1 to the Int16 value -1.
' Converted the SByte value 0 to the Int16 value 0.
' Converted the SByte value 10 to the Int16 value 10.
' Converted the SByte value 127 to the Int16 value 127.
Gilt für:
ToInt16(Int16)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Gibt die angegebene 16-Bit-Ganzzahl mit Vorzeichen zurück. Es wird keine wirkliche Konvertierung durchgeführt.
public:
static short ToInt16(short value);public static short ToInt16 (short value);static member ToInt16 : int16 -> int16Public Shared Function ToInt16 (value As Short) As ShortParameter
- value
- Int16
Die zurückzugebende 16-Bit-Ganzzahl mit Vorzeichen.
Gibt zurück
value wird unverändert zurückgegeben.
Gilt für:
ToInt16(Int64)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert den Wert der angegebenen 64-Bit-Ganzzahl mit Vorzeichen in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(long value);public static short ToInt16 (long value);static member ToInt16 : int64 -> int16Public Shared Function ToInt16 (value As Long) As ShortParameter
- value
- Int64
Die zu konvertierende 64-Bit-Ganzzahl mit Vorzeichen.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die value entspricht.
Ausnahmen
value ist größer als Int16.MaxValue oder kleiner als Int16.MinValue.
Beispiele
Im folgenden Beispiel wird versucht, jedes Element in einem Array mit langen ganzen Zahlen in eine 16-Bit-Ganzzahl mit Vorzeichen zu konvertieren.
long[] numbers = { Int64.MinValue, -1, 0, 121, 340, Int64.MaxValue };
short result;
foreach (long number in numbers)
{
try {
result = Convert.ToInt16(number);
Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
number.GetType().Name, number,
result.GetType().Name, result);
}
catch (OverflowException) {
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.",
number.GetType().Name, number);
}
}
// The example displays the following output:
// The Int64 value -9223372036854775808 is outside the range of the Int16 type.
// Converted the Int64 value -1 to the Int16 value -1.
// Converted the Int64 value 0 to the Int16 value 0.
// Converted the Int64 value 121 to the Int16 value 121.
// Converted the Int64 value 340 to the Int16 value 340.
// The Int64 value 9223372036854775807 is outside the range of the Int16 type.
let numbers =
[| Int64.MinValue; -1; 0; 121; 340; Int64.MaxValue |]
for number in numbers do
try
let result = Convert.ToInt16 number
printfn $"Converted the {number.GetType().Name} value {number} to the {result.GetType().Name} value {result}."
with :? OverflowException ->
printfn $"The {number.GetType().Name} value {number} is outside the range of the Int16 type."
// The example displays the following output:
// The Int64 value -9223372036854775808 is outside the range of the Int16 type.
// Converted the Int64 value -1 to the Int16 value -1.
// Converted the Int64 value 0 to the Int16 value 0.
// Converted the Int64 value 121 to the Int16 value 121.
// Converted the Int64 value 340 to the Int16 value 340.
// The Int64 value 9223372036854775807 is outside the range of the Int16 type.
Dim numbers() As Long = { Int64.MinValue, -1, 0, 121, 340, Int64.MaxValue }
Dim result As Short
For Each number As Long In numbers
Try
result = Convert.ToInt16(number)
Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
number.GetType().Name, number, _
result.GetType().Name, result)
Catch e As OverflowException
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.", _
number.GetType().Name, number)
End Try
Next
' The example displays the following output:
' The Int64 value -9223372036854775808 is outside the range of the Int16 type.
' Converted the Int64 value -1 to the Int16 value -1.
' Converted the Int64 value 0 to the Int16 value 0.
' Converted the Int64 value 121 to the Int16 value 121.
' Converted the Int64 value 340 to the Int16 value 340.
' The Int64 value 9223372036854775807 is outside the range of the Int16 type.
Gilt für:
ToInt16(Int32)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert den Wert der angegebenen 32-Bit-Ganzzahl mit Vorzeichen in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(int value);public static short ToInt16 (int value);static member ToInt16 : int -> int16Public Shared Function ToInt16 (value As Integer) As ShortParameter
- value
- Int32
Die zu konvertierende 32-Bit-Ganzzahl mit Vorzeichen.
Gibt zurück
Die 16-Bit-Ganzzahl mit Vorzeichen, die value entspricht.
Ausnahmen
value ist größer als Int16.MaxValue oder kleiner als Int16.MinValue.
Beispiele
Im folgenden Beispiel wird versucht, jedes Element in einem Array von ganzen Zahlen in eine 16-Bit-Ganzzahl mit Vorzeichen zu konvertieren.
int[] numbers = { Int32.MinValue, -1, 0, 121, 340, Int32.MaxValue };
short result;
foreach (int number in numbers)
{
try {
result = Convert.ToInt16(number);
Console.WriteLine("Converted the {0} value {1} to a {2} value {3}.",
number.GetType().Name, number,
result.GetType().Name, result);
}
catch (OverflowException) {
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.",
number.GetType().Name, number);
}
}
// The example displays the following output:
// The Int32 value -2147483648 is outside the range of the Int16 type.
// Converted the Int32 value -1 to a Int16 value -1.
// Converted the Int32 value 0 to a Int16 value 0.
// Converted the Int32 value 121 to a Int16 value 121.
// Converted the Int32 value 340 to a Int16 value 340.
// The Int32 value 2147483647 is outside the range of the Int16 type.
let numbers =
[| Int32.MinValue; -1; 0; 121; 340; Int32.MaxValue |]
for number in numbers do
try
let result = Convert.ToInt16 number
printfn $"Converted the {number.GetType().Name} value {number} to a {result.GetType().Name} value {result}."
with :? OverflowException ->
printfn $"The {number.GetType().Name} value {number} is outside the range of the Int16 type."
// The example displays the following output:
// The Int32 value -2147483648 is outside the range of the Int16 type.
// Converted the Int32 value -1 to a Int16 value -1.
// Converted the Int32 value 0 to a Int16 value 0.
// Converted the Int32 value 121 to a Int16 value 121.
// Converted the Int32 value 340 to a Int16 value 340.
// The Int32 value 2147483647 is outside the range of the Int16 type.
Dim numbers() As Integer = { Int32.MinValue, -1, 0, 121, 340, Int32.MaxValue }
Dim result As Short
For Each number As Integer In numbers
Try
result = Convert.ToInt16(number)
Console.WriteLine("Converted the {0} value {1} to a {2} value {3}.", _
number.GetType().Name, number, _
result.GetType().Name, result)
Catch e As OverflowException
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.", _
number.GetType().Name, number)
End Try
Next
' The example displays the following output:
' The Int32 value -2147483648 is outside the range of the Int16 type.
' Converted the Int32 value -1 to a Int16 value -1.
' Converted the Int32 value 0 to a Int16 value 0.
' Converted the Int32 value 121 to a Int16 value 121.
' Converted the Int32 value 340 to a Int16 value 340.
' The Int32 value 2147483647 is outside the range of the Int16 type.
Gilt für:
ToInt16(Double)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert den Wert der angegebenen Gleitkommazahl mit doppelter Genauigkeit in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(double value);public static short ToInt16 (double value);static member ToInt16 : double -> int16Public Shared Function ToInt16 (value As Double) As ShortParameter
- value
- Double
Die zu konvertierende Gleitkommazahl mit doppelter Genauigkeit.
Gibt zurück
value, auf die nächste 16-Bit-Ganzzahl mit Vorzeichen gerundet. Wenn value genau zwischen zwei ganzen Zahlen liegt, wird die gerade Zahl zurückgegeben (d. h. 4,5 wird in 4 und 5,5 in 6 konvertiert).
Ausnahmen
value ist größer als Int16.MaxValue oder kleiner als Int16.MinValue.
Beispiele
Im folgenden Beispiel wird jedes Element in einem Array von Double Werten in eine 16-Bit-Ganzzahl mit Vorzeichen konvertiert. Das Beispiel veranschaulicht, dass ein beliebiger Teil eines Double Werts vor der Konvertierung gerundet wird.
double[] values = { Double.MinValue, -1.38e10, -1023.299, -12.98,
0, 9.113e-16, 103.919, 17834.191, Double.MaxValue };
short result;
foreach (double value in values)
{
try {
result = Convert.ToInt16(value);
Console.WriteLine("Converted {0} to {1}.", value, result);
}
catch (OverflowException)
{
Console.WriteLine("{0} is outside the range of the Int16 type.", value);
}
}
// -1.79769313486232E+308 is outside the range of the Int16 type.
// -13800000000 is outside the range of the Int16 type.
// Converted -1023.299 to -1023.
// Converted -12.98 to -13.
// Converted 0 to 0.
// Converted 9.113E-16 to 0.
// Converted 103.919 to 104.
// Converted 17834.191 to 17834.
// 1.79769313486232E+308 is outside the range of the Int16 type.
let values =
[| Double.MinValue; -1.38e10; -1023.299; -12.98
0; 9.113e-16; 103.919; 17834.191; Double.MaxValue |]
for value in values do
try
let result = Convert.ToInt16 value
printfn $"Converted {value} to {result}."
with :? OverflowException ->
printfn $"{value} is outside the range of the Int16 type."
// -1.79769313486232E+308 is outside the range of the Int16 type.
// -13800000000 is outside the range of the Int16 type.
// Converted -1023.299 to -1023.
// Converted -12.98 to -13.
// Converted 0 to 0.
// Converted 9.113E-16 to 0.
// Converted 103.919 to 104.
// Converted 17834.191 to 17834.
// 1.79769313486232E+308 is outside the range of the Int16 type.
Dim values() As Double = { Double.MinValue, -1.38e10, -1023.299, -12.98, _
0, 9.113e-16, 103.919, 17834.191, Double.MaxValue }
Dim result As Short
For Each value As Double In values
Try
result = Convert.ToInt16(value)
Console.WriteLine("Converted {0} to {1}.", value, result)
Catch e As OverflowException
Console.WriteLine("{0} is outside the range of the Int16 type.", value)
End Try
Next
' -1.79769313486232E+308 is outside the range of the Int16 type.
' -13800000000 is outside the range of the Int16 type.
' Converted -1023.299 to -1023.
' Converted -12.98 to -13.
' Converted 0 to 0.
' Converted 9.113E-16 to 0.
' Converted 103.919 to 104.
' Converted 17834.191 to 17834.
' 1.79769313486232E+308 is outside the range of the Int16 type.
Weitere Informationen
Gilt für:
ToInt16(Decimal)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert den Wert der angegebenen Dezimalzahl in eine entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::Decimal value);public static short ToInt16 (decimal value);static member ToInt16 : decimal -> int16Public Shared Function ToInt16 (value As Decimal) As ShortParameter
- value
- Decimal
Die zu konvertierende Dezimalzahl.
Gibt zurück
value, auf die nächste 16-Bit-Ganzzahl mit Vorzeichen gerundet. Wenn value genau zwischen zwei ganzen Zahlen liegt, wird die gerade Zahl zurückgegeben (d. h. 4,5 wird in 4 und 5,5 in 6 konvertiert).
Ausnahmen
value ist größer als Int16.MaxValue oder kleiner als Int16.MinValue.
Beispiele
Im folgenden Beispiel wird versucht, jedes Element in einem Array von Decimal Werten in eine 16-Bit-Ganzzahl mit Vorzeichen zu konvertieren. Das Beispiel veranschaulicht, dass ein beliebiger Bruchteil eines Decimal Werts bei der Konvertierung gerundet wird.
decimal[] values = { Decimal.MinValue, -1034.23m, -12m, 0m, 147m,
9214.16m, Decimal.MaxValue };
short result;
foreach (decimal value in values)
{
try {
result = Convert.ToInt16(value);
Console.WriteLine("Converted {0} to {1}.", value, result);
}
catch (OverflowException)
{
Console.WriteLine("{0} is outside the range of the Int16 type.",
value);
}
}
// The example displays the following output:
// -79228162514264337593543950335 is outside the range of the Int16 type.
// Converted -1034.23 to -1034.
// Converted -12 to -12.
// Converted 0 to 0.
// Converted 147 to 147.
// Converted 9214.16 to 9214.
// 79228162514264337593543950335 is outside the range of the Int16 type.
let values =
[| Decimal.MinValue; -1034.23m; -12m; 0m
147m; 9214.16m; Decimal.MaxValue |]
for value in values do
try
let result = Convert.ToInt16 value
printfn $"Converted {value} to {result}."
with :? OverflowException ->
printfn $"{value} is outside the range of the Int16 type."
// The example displays the following output:
// -79228162514264337593543950335 is outside the range of the Int16 type.
// Converted -1034.23 to -1034.
// Converted -12 to -12.
// Converted 0 to 0.
// Converted 147 to 147.
// Converted 9214.16 to 9214.
// 79228162514264337593543950335 is outside the range of the Int16 type.
Dim values() As Decimal = { Decimal.MinValue, -1034.23d, -12d, 0d, 147d, _
9214.16d, Decimal.MaxValue }
Dim result As Short
For Each value As Decimal In values
Try
result = Convert.ToInt16(value)
Console.WriteLine("Converted {0} to {1}.", value, result)
Catch e As OverflowException
Console.WriteLine("{0} is outside the range of the Int16 type.", _
value)
End Try
Next
' The example displays the following output:
' -79228162514264337593543950335 is outside the range of the Int16 type.
' Converted -1034.23 to -1034.
' Converted -12 to -12.
' Converted 0 to 0.
' Converted 147 to 147.
' Converted 9214.16 to 9214.
' 79228162514264337593543950335 is outside the range of the Int16 type.
Weitere Informationen
Gilt für:
ToInt16(DateTime)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Beim Aufrufen dieser Methode wird immer eine InvalidCastException ausgelöst.
public:
static short ToInt16(DateTime value);public static short ToInt16 (DateTime value);static member ToInt16 : DateTime -> int16Public Shared Function ToInt16 (value As DateTime) As ShortParameter
- value
- DateTime
Der Datums- und Uhrzeitwert, der konvertiert werden soll.
Gibt zurück
Diese Konvertierung wird nicht unterstützt. Es wird kein Wert zurückgegeben.
Ausnahmen
Diese Konvertierung wird nicht unterstützt.
Gilt für:
ToInt16(Char)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert den Wert des angegebenen Unicode-Zeichens in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(char value);public static short ToInt16 (char value);static member ToInt16 : char -> int16Public Shared Function ToInt16 (value As Char) As ShortParameter
- value
- Char
Das zu konvertierende Unicode-Zeichen.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die value entspricht.
Ausnahmen
value ist größer als Int16.MaxValue.
Beispiele
Im folgenden Beispiel wird versucht, jedes Element in einem Array von Char Werten in eine 16-Bit-Ganzzahl mit Vorzeichen zu konvertieren.
char[] chars = { 'a', 'z', '\x0007', '\x03FF',
'\x7FFF', '\xFFFE' };
short result;
foreach (char ch in chars)
{
try {
result = Convert.ToInt16(ch);
Console.WriteLine("'{0}' converts to {1}.", ch, result);
}
catch (OverflowException) {
Console.WriteLine("Unable to convert u+{0} to an Int16.",
((int)ch).ToString("X4"));
}
}
// The example displays the following output:
// 'a' converts to 97.
// 'z' converts to 122.
// '' converts to 7.
// 'Ͽ' converts to 1023.
// '翿' converts to 32767.
// Unable to convert u+FFFE to an Int16.
let chars =
[| 'a'; 'z'; '\u0007'; '\u03FF'; '\u7FFF'; '\uFFFE' |]
for ch in chars do
try
let result = Convert.ToInt16 ch
printfn $"'{ch}' converts to {result}."
with :? OverflowException ->
printfn $"Unable to convert u+{int ch:X4} to an Int16."
// The example displays the following output:
// 'a' converts to 97.
// 'z' converts to 122.
// '' converts to 7.
// 'Ͽ' converts to 1023.
// '翿' converts to 32767.
// Unable to convert u+FFFE to an Int16.
Dim chars() As Char = { "a"c, "z"c, ChrW(7), ChrW(1023), _
ChrW(Short.MaxValue), ChrW(&hFFFE) }
Dim result As Short
For Each ch As Char in chars
Try
result = Convert.ToInt16(ch)
Console.WriteLine("'{0}' converts to {1}.", ch, result)
Catch e As OverflowException
Console.WriteLine("Unable to convert u+{0} to an Int16.", _
AscW(ch).ToString("X4"))
End Try
Next
' The example displays the following output:
' 'a' converts to 97.
' 'z' converts to 122.
' '' converts to 7.
' 'Ͽ' converts to 1023.
' '翿' converts to 32767.
' Unable to convert u+FFFE to an Int16.
Gilt für:
ToInt16(Byte)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert den Wert der angegebenen 8-Bit-Ganzzahl ohne Vorzeichen in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::Byte value);public static short ToInt16 (byte value);static member ToInt16 : byte -> int16Public Shared Function ToInt16 (value As Byte) As ShortParameter
- value
- Byte
Die zu konvertierende 8-Bit-Ganzzahl ohne Vorzeichen.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die value entspricht.
Beispiele
Im folgenden Beispiel wird jedes Element in einem Array von Byte Werten in eine 16-Bit-Ganzzahl mit Vorzeichen konvertiert.
byte[] bytes = { Byte.MinValue, 14, 122, Byte.MaxValue};
short result;
foreach (byte byteValue in bytes)
{
result = Convert.ToInt16(byteValue);
Console.WriteLine("The Byte value {0} converts to {1}.",
byteValue, result);
}
// The example displays the following output:
// The Byte value 0 converts to 0.
// The Byte value 14 converts to 14.
// The Byte value 122 converts to 122.
// The Byte value 255 converts to 255.
let bytes = [| Byte.MinValue; 14uy; 122uy; Byte.MaxValue |]
for byteValue in bytes do
let result = Convert.ToInt16 byteValue
printfn $"The Byte value {byteValue} converts to {result}."
// The example displays the following output:
// The Byte value 0 converts to 0.
// The Byte value 14 converts to 14.
// The Byte value 122 converts to 122.
// The Byte value 255 converts to 255.
Dim bytes() As Byte = { Byte.MinValue, 14, 122, Byte.MaxValue}
Dim result As Short
For Each byteValue As Byte In bytes
result = Convert.ToInt16(byteValue)
Console.WriteLine("The Byte value {0} converts to {1}.", _
byteValue, result)
Next
' The example displays the following output:
' The Byte value 0 converts to 0.
' The Byte value 14 converts to 14.
' The Byte value 122 converts to 122.
' The Byte value 255 converts to 255.
Gilt für:
ToInt16(Boolean)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert den angegebenen booleschen Wert in die entsprechende 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(bool value);public static short ToInt16 (bool value);static member ToInt16 : bool -> int16Public Shared Function ToInt16 (value As Boolean) As ShortParameter
- value
- Boolean
Der zu konvertierende boolesche Wert.
Gibt zurück
Die Zahl 1, wenn valuetrue ist, andernfalls 0 (null).
Beispiele
Im folgenden Beispiel werden die booleschen Werte true und false in Int16 Werte konvertiert.
bool falseFlag = false;
bool trueFlag = true;
Console.WriteLine("{0} converts to {1}.", falseFlag,
Convert.ToInt16(falseFlag));
Console.WriteLine("{0} converts to {1}.", trueFlag,
Convert.ToInt16(trueFlag));
// The example displays the following output:
// False converts to 0.
// True converts to 1.
let falseFlag = false
let trueFlag = true
printfn $"{falseFlag} converts to {Convert.ToInt16 falseFlag}."
printfn $"{trueFlag} converts to {Convert.ToInt16 trueFlag}."
// The example displays the following output:
// False converts to 0.
// True converts to 1.
Dim falseFlag As Boolean = False
Dim trueFlag As Boolean = True
Console.WriteLine("{0} converts to {1}.", falseFlag, _
Convert.ToInt16(falseFlag))
Console.WriteLine("{0} converts to {1}.", trueFlag, _
Convert.ToInt16(trueFlag))
' The example displays the following output:
' False converts to 0.
' True converts to 1.
Gilt für:
ToInt16(Object)
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
- Quelle:
- Convert.cs
Konvertiert den Wert des angegebenen Objekts in eine 16-Bit-Ganzzahl mit Vorzeichen.
public:
static short ToInt16(System::Object ^ value);public static short ToInt16 (object value);public static short ToInt16 (object? value);static member ToInt16 : obj -> int16Public Shared Function ToInt16 (value As Object) As ShortParameter
- value
- Object
Ein Objekt, das die IConvertible-Schnittstelle implementiert, oder null.
Gibt zurück
Eine 16-Bit-Ganzzahl mit Vorzeichen, die value entspricht, oder 0 (null), wenn value gleich null ist.
Ausnahmen
value weist kein geeignetes Format für einen Int16-Typ auf.
Die IConvertible-Schnittstelle wird von value nicht implementiert.
- oder -
Die Konvertierung wird nicht unterstützt.
value stellt eine Zahl dar, die kleiner als Int16.MinValue oder größer als Int16.MaxValue ist.
Beispiele
Im folgenden Beispiel wird versucht, jedes Element in einem Objektarray in eine 16-Bit-Ganzzahl mit Vorzeichen zu konvertieren.
object[] values= { true, -12, 163, 935, 'x', new DateTime(2009, 5, 12),
"104", "103.0", "-1", "1.00e2", "One", 1.00e2};
short result;
foreach (object value in values)
{
try {
result = Convert.ToInt16(value);
Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
value.GetType().Name, value,
result.GetType().Name, result);
}
catch (OverflowException) {
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.",
value.GetType().Name, value);
}
catch (FormatException) {
Console.WriteLine("The {0} value {1} is not in a recognizable format.",
value.GetType().Name, value);
}
catch (InvalidCastException) {
Console.WriteLine("No conversion to an Int16 exists for the {0} value {1}.",
value.GetType().Name, value);
}
}
// The example displays the following output:
// Converted the Boolean value True to the Int16 value 1.
// Converted the Int32 value -12 to the Int16 value -12.
// Converted the Int32 value 163 to the Int16 value 163.
// Converted the Int32 value 935 to the Int16 value 935.
// Converted the Char value x to the Int16 value 120.
// No conversion to an Int16 exists for the DateTime value 5/12/2009 12:00:00 AM.
// Converted the String value 104 to the Int16 value 104.
// The String value 103.0 is not in a recognizable format.
// Converted the String value -1 to the Int16 value -1.
// The String value 1.00e2 is not in a recognizable format.
// The String value One is not in a recognizable format.
// Converted the Double value 100 to the Int16 value 100.
let values: obj[] =
[| true; -12; 163; 935; 'x'; DateTime(2009, 5, 12)
"104"; "103.0"; "-1"; "1.00e2"; "One"; 1.00e2 |]
for value in values do
try
let result = Convert.ToInt16 value
printfn $"Converted the {value.GetType().Name} value {value} to the {result.GetType().Name} value {result}."
with
| :? OverflowException ->
printfn $"The {value.GetType().Name} value {value} is outside the range of the Int16 type."
| :? FormatException ->
printfn $"The {value.GetType().Name} value {value} is not in a recognizable format."
| :? InvalidCastException ->
printfn $"No conversion to an Int16 exists for the {value.GetType().Name} value {value}."
// The example displays the following output:
// Converted the Boolean value True to the Int16 value 1.
// Converted the Int32 value -12 to the Int16 value -12.
// Converted the Int32 value 163 to the Int16 value 163.
// Converted the Int32 value 935 to the Int16 value 935.
// Converted the Char value x to the Int16 value 120.
// No conversion to an Int16 exists for the DateTime value 5/12/2009 12:00:00 AM.
// Converted the String value 104 to the Int16 value 104.
// The String value 103.0 is not in a recognizable format.
// Converted the String value -1 to the Int16 value -1.
// The String value 1.00e2 is not in a recognizable format.
// The String value One is not in a recognizable format.
// Converted the Double value 100 to the Int16 value 100.
Dim values() As Object = { True, -12, 163, 935, "x"c, #5/12/2009#, _
"104", "103.0", "-1", _
"1.00e2", "One", 1.00e2}
Dim result As Short
For Each value As Object In values
Try
result = Convert.ToInt16(value)
Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
value.GetType().Name, value, _
result.GetType().Name, result)
Catch e As OverflowException
Console.WriteLine("The {0} value {1} is outside the range of the Int16 type.", _
value.GetType().Name, value)
Catch e As FormatException
Console.WriteLine("The {0} value {1} is not in a recognizable format.", _
value.GetType().Name, value)
Catch e As InvalidCastException
Console.WriteLine("No conversion to an Int16 exists for the {0} value {1}.", _
value.GetType().Name, value)
End Try
Next
' The example displays the following output:
' Converted the Boolean value True to the Int16 value 1.
' Converted the Int32 value -12 to the Int16 value -12.
' Converted the Int32 value 163 to the Int16 value 163.
' Converted the Int32 value 935 to the Int16 value 935.
' Converted the Char value x to the Int16 value 120.
' No conversion to an Int16 exists for the DateTime value 5/12/2009 12:00:00 AM.
' Converted the String value 104 to the Int16 value 104.
' The String value 103.0 is not in a recognizable format.
' Converted the String value -1 to the Int16 value -1.
' The String value 1.00e2 is not in a recognizable format.
' The String value One is not in a recognizable format.
' Converted the Double value 100 to the Int16 value 100.
Hinweise
Ist value dies nicht nullder Fall, umschließt diese Methode einen Aufruf der IConvertible.ToInt16 Implementierung des zugrunde liegenden Typs von value.
Gilt für:
Zusammenarbeit auf GitHub
Die Quelle für diesen Inhalt finden Sie auf GitHub, wo Sie auch Issues und Pull Requests erstellen und überprüfen können. Weitere Informationen finden Sie in unserem Leitfaden für Mitwirkende.
