Freigeben über


Graphics.FillPolygon Methode

Definition

Füllt das Innere eines Polygons, das durch ein Array von Punkten definiert wird, das durch Point Strukturen angegeben wird.

Überlädt

FillPolygon(Brush, ReadOnlySpan<PointF>, FillMode)
FillPolygon(Brush, ReadOnlySpan<Point>, FillMode)
FillPolygon(Brush, PointF[], FillMode)

Füllt das Innere eines Polygons aus, das durch ein Array von Punkten definiert wird, das durch PointF Strukturen mithilfe des angegebenen Füllmodus angegeben wird.

FillPolygon(Brush, Point[], FillMode)

Füllt das Innere eines Polygons aus, das durch ein Array von Punkten definiert wird, das durch Point Strukturen mithilfe des angegebenen Füllmodus angegeben wird.

FillPolygon(Brush, ReadOnlySpan<Point>)
FillPolygon(Brush, PointF[])

Füllt das Innere eines Polygons, das durch ein Array von Punkten definiert wird, das durch PointF Strukturen angegeben wird.

FillPolygon(Brush, Point[])

Füllt das Innere eines Polygons, das durch ein Array von Punkten definiert wird, das durch Point Strukturen angegeben wird.

FillPolygon(Brush, ReadOnlySpan<PointF>)

FillPolygon(Brush, ReadOnlySpan<PointF>, FillMode)

Quelle:
Graphics.cs
Quelle:
Graphics.cs
public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points, System::Drawing::Drawing2D::FillMode fillMode);
public void FillPolygon (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.PointF> points, System.Drawing.Drawing2D.FillMode fillMode);
member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of PointF), fillMode As FillMode)

Parameter

brush
Brush
fillMode
FillMode

Gilt für:

FillPolygon(Brush, ReadOnlySpan<Point>, FillMode)

Quelle:
Graphics.cs
Quelle:
Graphics.cs
public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points, System::Drawing::Drawing2D::FillMode fillMode);
public void FillPolygon (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.Point> points, System.Drawing.Drawing2D.FillMode fillMode);
member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of Point), fillMode As FillMode)

Parameter

brush
Brush
fillMode
FillMode

Gilt für:

FillPolygon(Brush, PointF[], FillMode)

Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs

Füllt das Innere eines Polygons aus, das durch ein Array von Punkten definiert wird, das durch PointF Strukturen mithilfe des angegebenen Füllmodus angegeben wird.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points, System::Drawing::Drawing2D::FillMode fillMode);
public void FillPolygon (System.Drawing.Brush brush, System.Drawing.PointF[] points, System.Drawing.Drawing2D.FillMode fillMode);
member this.FillPolygon : System.Drawing.Brush * System.Drawing.PointF[] * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillPolygon (brush As Brush, points As PointF(), fillMode As FillMode)

Parameter

brush
Brush

Brush, die die Merkmale der Füllung bestimmt.

points
PointF[]

Array von PointF Strukturen, die die Scheitelpunkte des zu füllenden Polygons darstellen.

fillMode
FillMode

Element der FillMode-Aufzählung, die die Formatvorlage der Füllung bestimmt.

Ausnahmen

brush ist null.

-oder-

points ist null.

Beispiele

Das folgende Codebeispiel wurde für die Verwendung mit Windows Forms entwickelt und erfordert PaintEventArgse, bei dem es sich um einen Parameter des Paint-Ereignishandlers handelt. Der Code führt die folgende Aktion aus:

  • Erstellt einen vollblauen Pinsel.

  • Erstellt ein Array von sieben Punkten, um ein Polygon zu definieren.

  • Legt den Füllmodus auf Windingfest.

  • Füllt den polygonalen Bereich auf dem Bildschirm aus.

public:
   void FillPolygonPointFFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Define fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Fill polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints, newFillMode );
   }
public void FillPolygonPointFFillMode(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    PointF point1 = new PointF(50.0F, 50.0F);
    PointF point2 = new PointF(100.0F, 25.0F);
    PointF point3 = new PointF(200.0F, 5.0F);
    PointF point4 = new PointF(250.0F, 50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Define fill mode.
    FillMode newFillMode = FillMode.Winding;

    // Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode);
}
Public Sub FillPolygonPointFFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Define fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode)
End Sub

Hinweise

Alle zwei aufeinander folgenden Punkte im Array geben eine Seite des Polygons an. Wenn der letzte Punkt und der erste Punkt nicht übereinstimmen, geben sie außerdem die schließende Seite des Polygons an.

Gilt für:

FillPolygon(Brush, Point[], FillMode)

Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs

Füllt das Innere eines Polygons aus, das durch ein Array von Punkten definiert wird, das durch Point Strukturen mithilfe des angegebenen Füllmodus angegeben wird.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points, System::Drawing::Drawing2D::FillMode fillMode);
public void FillPolygon (System.Drawing.Brush brush, System.Drawing.Point[] points, System.Drawing.Drawing2D.FillMode fillMode);
member this.FillPolygon : System.Drawing.Brush * System.Drawing.Point[] * System.Drawing.Drawing2D.FillMode -> unit
Public Sub FillPolygon (brush As Brush, points As Point(), fillMode As FillMode)

Parameter

brush
Brush

Brush, die die Merkmale der Füllung bestimmt.

points
Point[]

Array von Point Strukturen, die die Scheitelpunkte des zu füllenden Polygons darstellen.

fillMode
FillMode

Element der FillMode-Aufzählung, die die Formatvorlage der Füllung bestimmt.

Ausnahmen

brush ist null.

-oder-

points ist null.

Beispiele

Das folgende Codebeispiel wurde für die Verwendung mit Windows Forms entwickelt und erfordert PaintEventArgse, bei dem es sich um einen Parameter des Paint-Ereignishandlers handelt. Der Code führt die folgenden Aktionen aus:

  • Erstellt einen vollblauen Pinsel.

  • Erstellt ein Array von sieben Punkten, um ein Polygon zu definieren.

  • Legt den Füllmodus auf Windingfest.

  • Füllt den polygonalen Bereich auf dem Bildschirm aus.

public:
   void FillPolygonPointFillMode( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Define fill mode.
      FillMode newFillMode = FillMode::Winding;

      // Draw polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints, newFillMode );
   }
public void FillPolygonPointFillMode(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    Point point1 = new Point(50, 50);
    Point point2 = new Point(100, 25);
    Point point3 = new Point(200, 5);
    Point point4 = new Point(250, 50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Define fill mode.
    FillMode newFillMode = FillMode.Winding;

    // Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode);
}
Public Sub FillPolygonPointFillMode(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Define fill mode.
    Dim newFillMode As FillMode = FillMode.Winding

    ' Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints, newFillMode)
End Sub

Hinweise

Alle zwei aufeinander folgenden Punkte im Array geben eine Seite des Polygons an. Wenn der letzte Punkt und der erste Punkt nicht übereinstimmen, geben sie außerdem die schließende Seite des Polygons an.

Gilt für:

FillPolygon(Brush, ReadOnlySpan<Point>)

Quelle:
Graphics.cs
Quelle:
Graphics.cs
public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::Point> points);
public void FillPolygon (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.Point> points);
member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.Point> -> unit
Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of Point))

Parameter

brush
Brush

Gilt für:

FillPolygon(Brush, PointF[])

Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs

Füllt das Innere eines Polygons, das durch ein Array von Punkten definiert wird, das durch PointF Strukturen angegeben wird.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::PointF> ^ points);
public:
 void FillPolygon(System::Drawing::Brush ^ brush, ... cli::array <System::Drawing::PointF> ^ points);
public void FillPolygon (System.Drawing.Brush brush, System.Drawing.PointF[] points);
public void FillPolygon (System.Drawing.Brush brush, params System.Drawing.PointF[] points);
member this.FillPolygon : System.Drawing.Brush * System.Drawing.PointF[] -> unit
Public Sub FillPolygon (brush As Brush, points As PointF())
Public Sub FillPolygon (brush As Brush, ParamArray points As PointF())

Parameter

brush
Brush

Brush, die die Merkmale der Füllung bestimmt.

points
PointF[]

Array von PointF Strukturen, die die Scheitelpunkte des zu füllenden Polygons darstellen.

Ausnahmen

brush ist null.

-oder-

points ist null.

Beispiele

Das folgende Codebeispiel wurde für die Verwendung mit Windows Forms entwickelt und erfordert PaintEventArgse, bei dem es sich um einen Parameter des Paint-Ereignishandlers handelt. Der Code führt die folgenden Aktionen aus:

  • Erstellt einen vollblauen Pinsel.

  • Erstellt ein Array von sieben Punkten, um ein Polygon zu definieren.

  • Füllt den polygonalen Bereich auf dem Bildschirm aus.

public:
   void FillPolygonPointF( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Fill polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints );
   }
public void FillPolygonPointF(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    PointF point1 = new PointF(50.0F, 50.0F);
    PointF point2 = new PointF(100.0F, 25.0F);
    PointF point3 = new PointF(200.0F, 5.0F);
    PointF point4 = new PointF(250.0F, 50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints);
}
Public Sub FillPolygonPointF(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Fill polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints)
End Sub

Hinweise

Alle zwei aufeinander folgenden Punkte im Array geben eine Seite des Polygons an. Wenn der letzte Punkt und der erste Punkt nicht übereinstimmen, geben sie außerdem die schließende Seite des Polygons an.

Gilt für:

FillPolygon(Brush, Point[])

Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs
Quelle:
Graphics.cs

Füllt das Innere eines Polygons, das durch ein Array von Punkten definiert wird, das durch Point Strukturen angegeben wird.

public:
 void FillPolygon(System::Drawing::Brush ^ brush, cli::array <System::Drawing::Point> ^ points);
public void FillPolygon (System.Drawing.Brush brush, System.Drawing.Point[] points);
member this.FillPolygon : System.Drawing.Brush * System.Drawing.Point[] -> unit
Public Sub FillPolygon (brush As Brush, points As Point())

Parameter

brush
Brush

Brush, die die Merkmale der Füllung bestimmt.

points
Point[]

Array von Point Strukturen, die die Scheitelpunkte des zu füllenden Polygons darstellen.

Ausnahmen

brush ist null.

-oder-

points ist null.

Beispiele

Das folgende Codebeispiel wurde für die Verwendung mit Windows Forms entwickelt und erfordert PaintEventArgse, bei dem es sich um einen Parameter des Paint-Ereignishandlers handelt. Der Code führt die folgenden Aktionen aus:

  • Erstellt einen vollblauen Pinsel.

  • Erstellt ein Array von sieben Punkten, um ein Polygon zu definieren.

  • Füllt den polygonalen Bereich auf dem Bildschirm aus.

public:
   void FillPolygonPoint( PaintEventArgs^ e )
   {
      // Create solid brush.
      SolidBrush^ blueBrush = gcnew SolidBrush( Color::Blue );

      // Create points that define polygon.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw polygon to screen.
      e->Graphics->FillPolygon( blueBrush, curvePoints );
   }
public void FillPolygonPoint(PaintEventArgs e)
{

    // Create solid brush.
    SolidBrush blueBrush = new SolidBrush(Color.Blue);

    // Create points that define polygon.
    Point point1 = new Point(50, 50);
    Point point2 = new Point(100, 25);
    Point point3 = new Point(200, 5);
    Point point4 = new Point(250, 50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints = {point1, point2, point3, point4, point5, point6, point7};

    // Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints);
}
Public Sub FillPolygonPoint(ByVal e As PaintEventArgs)

    ' Create solid brush.
    Dim blueBrush As New SolidBrush(Color.Blue)

    ' Create points that define polygon.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw polygon to screen.
    e.Graphics.FillPolygon(blueBrush, curvePoints)
End Sub

Hinweise

Alle zwei aufeinander folgenden Punkte im Array geben eine Seite des Polygons an. Wenn der letzte Punkt und der erste Punkt nicht übereinstimmen, geben sie außerdem die schließende Seite des Polygons an.

Gilt für:

FillPolygon(Brush, ReadOnlySpan<PointF>)

Quelle:
Graphics.cs
Quelle:
Graphics.cs
public:
 void FillPolygon(System::Drawing::Brush ^ brush, ReadOnlySpan<System::Drawing::PointF> points);
public void FillPolygon (System.Drawing.Brush brush, ReadOnlySpan<System.Drawing.PointF> points);
member this.FillPolygon : System.Drawing.Brush * ReadOnlySpan<System.Drawing.PointF> -> unit
Public Sub FillPolygon (brush As Brush, points As ReadOnlySpan(Of PointF))

Parameter

brush
Brush

Gilt für: