Graphics.SetClip Methode
Definition
Wichtig
Einige Informationen beziehen sich auf Vorabversionen, die vor dem Release ggf. grundlegend überarbeitet werden. Microsoft übernimmt hinsichtlich der hier bereitgestellten Informationen keine Gewährleistungen, seien sie ausdrücklich oder konkludent.
Überlädt
SetClip(Region, CombineMode) |
Legt den Ausschneidebereich dieses Graphics auf das Ergebnis des angegebenen Vorgangs fest, indem der aktuelle Ausschneidebereich und der angegebene Region kombiniert werden. |
SetClip(RectangleF, CombineMode) |
Legt den Ausschneidebereich dieses Graphics auf das Ergebnis des angegebenen Vorgangs fest, indem der aktuelle Ausschneidebereich und das Rechteck, das durch eine RectangleF-Struktur angegeben wird, kombiniert werden. |
SetClip(Rectangle, CombineMode) |
Legt den Ausschneidebereich dieses Graphics auf das Ergebnis des angegebenen Vorgangs fest, indem der aktuelle Ausschneidebereich und das Rechteck, das durch eine Rectangle-Struktur angegeben wird, kombiniert werden. |
SetClip(Graphics, CombineMode) |
Legt den Ausschneidebereich dieses Graphics auf das Ergebnis der angegebenen Kombination des aktuellen Ausschneidebereichs und der Clip-Eigenschaft des angegebenen Graphics fest. |
SetClip(RectangleF) |
Legt den Ausschneidebereich dieses Graphics auf das Rechteck fest, das durch eine RectangleF-Struktur angegeben wird. |
SetClip(Rectangle) |
Legt den Ausschneidebereich dieses Graphics auf das Rechteck fest, das durch eine Rectangle-Struktur angegeben wird. |
SetClip(Graphics) |
Legt den Ausschneidebereich dieses Graphics auf die |
SetClip(GraphicsPath) |
Legt den Ausschneidebereich dieses Graphics auf den angegebenen GraphicsPath fest. |
SetClip(GraphicsPath, CombineMode) |
Legt den Ausschneidebereich dieses Graphics auf das Ergebnis des angegebenen Vorgangs fest, indem der aktuelle Ausschneidebereich und der angegebene GraphicsPath kombiniert werden. |
SetClip(Region, CombineMode)
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
public:
void SetClip(System::Drawing::Region ^ region, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Region region, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Region * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (region As Region, combineMode As CombineMode)
Parameter
- combineMode
- CombineMode
Member der CombineMode-Enumeration, der die zu verwendende Operation zum Kombinieren angibt.
Beispiele
Das folgende Codebeispiel ist für die Verwendung mit Windows Forms konzipiert und erfordert PaintEventArgse
, was ein Parameter des Paint Ereignishandlers ist. Der Code führt die folgenden Aktionen aus:
Erstellt ein kleines Rechteck für den Clippingbereich.
Legt den Clippingbereich auf das Rechteck mit dem Replace Member fest.
Füllt ein großes Rechteck mit einem schwarzen Pinsel aus.
Das Ergebnis ist ein kleines, gefülltes schwarzes Rechteck.
public:
void SetClipRegionCombine( PaintEventArgs^ e )
{
// Create region for clipping.
System::Drawing::Region^ clipRegion = gcnew System::Drawing::Region( Rectangle(0,0,100,100) );
// Set clipping region of graphics to region.
e->Graphics->SetClip( clipRegion, CombineMode::Replace );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipRegionCombine(PaintEventArgs e)
{
// Create region for clipping.
Region clipRegion = new Region(new Rectangle(0, 0, 100, 100));
// Set clipping region of graphics to region.
e.Graphics.SetClip(clipRegion, CombineMode.Replace);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRegionCombine(ByVal e As PaintEventArgs)
' Create region for clipping.
Dim clipRegion As New [Region](New Rectangle(0, 0, 100, 100))
' Set clipping region of graphics to region.
e.Graphics.SetClip(clipRegion, CombineMode.Replace)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Gilt für:
SetClip(RectangleF, CombineMode)
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
Legt den Ausschneidebereich dieses Graphics auf das Ergebnis des angegebenen Vorgangs fest, indem der aktuelle Ausschneidebereich und das Rechteck, das durch eine RectangleF-Struktur angegeben wird, kombiniert werden.
public:
void SetClip(System::Drawing::RectangleF rect, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.RectangleF rect, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.RectangleF * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (rect As RectangleF, combineMode As CombineMode)
Parameter
- rect
- RectangleF
Zu kombinierende RectangleF-Struktur.
- combineMode
- CombineMode
Member der CombineMode-Enumeration, der die zu verwendende Operation zum Kombinieren angibt.
Beispiele
Das folgende Codebeispiel ist für die Verwendung mit Windows Forms konzipiert und erfordert PaintEventArgse
, was ein Parameter des Paint Ereignishandlers ist. Der Code führt die folgenden Aktionen aus:
Erstellt ein kleines Rechteck für den Clippingbereich.
Legt den Clippingbereich auf das Rechteck mit dem Replace Member fest.
Füllt ein großes Rechteck mit einem schwarzen Pinsel aus.
Das Ergebnis ist ein kleines, gefülltes schwarzes Rechteck.
public:
void SetClipRectangleFCombine( PaintEventArgs^ e )
{
// Create rectangle for clipping region.
RectangleF clipRect = RectangleF(0.0F,0.0F,100.0F,100.0F);
// Set clipping region of graphics to rectangle.
e->Graphics->SetClip( clipRect, CombineMode::Replace );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipRectangleFCombine(PaintEventArgs e)
{
// Create rectangle for clipping region.
RectangleF clipRect = new RectangleF(0.0F, 0.0F, 100.0F, 100.0F);
// Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect, CombineMode.Replace);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangleFCombine(ByVal e As PaintEventArgs)
' Create rectangle for clipping region.
Dim clipRect As New RectangleF(0.0F, 0.0F, 100.0F, 100.0F)
' Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect, CombineMode.Replace)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Gilt für:
SetClip(Rectangle, CombineMode)
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
public:
void SetClip(System::Drawing::Rectangle rect, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Rectangle rect, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Rectangle * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (rect As Rectangle, combineMode As CombineMode)
Parameter
- combineMode
- CombineMode
Member der CombineMode-Enumeration, der die zu verwendende Operation zum Kombinieren angibt.
Beispiele
Das folgende Codebeispiel ist für die Verwendung mit Windows Forms konzipiert und erfordert PaintEventArgse
, was ein Parameter des Paint Ereignishandlers ist. Der Code führt die folgenden Aktionen aus:
Erstellt ein kleines Rechteck für den Clippingbereich.
Legt den Clippingbereich auf das Rechteck mit dem Replace Member fest.
Füllt ein großes Rechteck mit einem schwarzen Pinsel aus.
Das Ergebnis ist ein kleines, gefülltes schwarzes Rechteck.
public:
void SetClipRectangleCombine( PaintEventArgs^ e )
{
// Create rectangle for clipping region.
Rectangle clipRect = Rectangle(0,0,100,100);
// Set clipping region of graphics to rectangle.
e->Graphics->SetClip( clipRect, CombineMode::Replace );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipRectangleCombine(PaintEventArgs e)
{
// Create rectangle for clipping region.
Rectangle clipRect = new Rectangle(0, 0, 100, 100);
// Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect, CombineMode.Replace);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangleCombine(ByVal e As PaintEventArgs)
' Create rectangle for clipping region.
Dim clipRect As New Rectangle(0, 0, 100, 100)
' Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect, CombineMode.Replace)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Gilt für:
SetClip(Graphics, CombineMode)
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
public:
void SetClip(System::Drawing::Graphics ^ g, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Graphics g, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Graphics * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (g As Graphics, combineMode As CombineMode)
Parameter
- combineMode
- CombineMode
Member der CombineMode-Enumeration, der die zu verwendende Operation zum Kombinieren angibt.
Beispiele
Das folgende Codebeispiel ist für die Verwendung mit Windows Forms konzipiert und erfordert PaintEventArgse
, was ein Parameter des Paint Ereignishandlers ist, sowie thisForm
, für Form das Beispiel. Der Code führt die folgenden Aktionen aus:
Erstellt eine temporäre Graphics aus dem
thisForm
Form des Beispiels.Legt den Beschneidungsbereich des temporären Graphics auf ein kleines Quadrat fest.
Updates den Beschneidungsbereich des Grafikobjekts des Formulars zu dem des neuen Graphics mit dem Replace Member.
Füllt ein großes Rechteck mit einem schwarzen Pinsel aus.
Das Ergebnis ist ein kleines, gefülltes, schwarzes Quadrat.
public:
void SetClipGraphicsCombine( PaintEventArgs^ e )
{
// Create temporary graphics object and set its clipping region.
Graphics^ newGraphics = this->CreateGraphics();
newGraphics->SetClip( Rectangle(0,0,100,100) );
// Update clipping region of graphics to clipping region of new
// graphics.
e->Graphics->SetClip( newGraphics, CombineMode::Replace );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
// Release new graphics.
delete newGraphics;
}
private void SetClipGraphicsCombine(PaintEventArgs e)
{
// Create temporary graphics object and set its clipping region.
Graphics newGraphics = this.CreateGraphics();
newGraphics.SetClip(new Rectangle(0, 0, 100, 100));
// Update clipping region of graphics to clipping region of new
// graphics.
e.Graphics.SetClip(newGraphics, CombineMode.Replace);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
// Release new graphics.
newGraphics.Dispose();
}
Private Sub SetClipGraphicsCombine(ByVal e As PaintEventArgs)
' Create temporary graphics object and set its clipping region.
Dim newGraphics As Graphics = Me.CreateGraphics()
newGraphics.SetClip(New Rectangle(0, 0, 100, 100))
' Update clipping region of graphics to clipping region of new
' graphics.
e.Graphics.SetClip(newGraphics, CombineMode.Replace)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
' Release new graphics.
newGraphics.Dispose()
End Sub
Gilt für:
SetClip(RectangleF)
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
Legt den Ausschneidebereich dieses Graphics auf das Rechteck fest, das durch eine RectangleF-Struktur angegeben wird.
public:
void SetClip(System::Drawing::RectangleF rect);
public void SetClip (System.Drawing.RectangleF rect);
member this.SetClip : System.Drawing.RectangleF -> unit
Public Sub SetClip (rect As RectangleF)
Parameter
- rect
- RectangleF
RectangleF-Struktur, die den neuen Ausschneidebereich darstellt.
Beispiele
Das folgende Codebeispiel ist für die Verwendung mit Windows Forms konzipiert und erfordert PaintEventArgse
, was ein Parameter des Paint Ereignishandlers ist. Der Code führt die folgenden Aktionen aus:
Erstellt ein kleines Rechteck für den Clippingbereich.
Legt den Clippingbereich auf das Rechteck fest.
Füllt ein großes Rechteck mit einem schwarzen Pinsel aus.
Das Ergebnis ist ein kleines, gefülltes schwarzes Rechteck.
public:
void SetClipRectangleF( PaintEventArgs^ e )
{
// Create rectangle for clipping region.
RectangleF clipRect = RectangleF(0.0F,0.0F,100.0F,100.0F);
// Set clipping region of graphics to rectangle.
e->Graphics->SetClip( clipRect );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipRectangleF(PaintEventArgs e)
{
// Create rectangle for clipping region.
RectangleF clipRect = new RectangleF(0.0F, 0.0F, 100.0F, 100.0F);
// Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangleF(ByVal e As PaintEventArgs)
' Create rectangle for clipping region.
Dim clipRect As New RectangleF(0.0F, 0.0F, 100.0F, 100.0F)
' Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Gilt für:
SetClip(Rectangle)
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
public:
void SetClip(System::Drawing::Rectangle rect);
public void SetClip (System.Drawing.Rectangle rect);
member this.SetClip : System.Drawing.Rectangle -> unit
Public Sub SetClip (rect As Rectangle)
Parameter
Beispiele
Das folgende Codebeispiel ist für die Verwendung mit Windows Forms konzipiert und erfordert PaintEventArgse
, was ein Parameter des Paint Ereignishandlers ist. Der Code führt die folgenden Aktionen aus:
Erstellt ein kleines Rechteck für den Clippingbereich.
Legt den Clippingbereich auf das Rechteck fest.
Füllt ein großes Rechteck mit einem schwarzen Pinsel aus.
Das Ergebnis ist ein kleines, gefülltes schwarzes Rechteck.
public:
void SetClipRectangle( PaintEventArgs^ e )
{
// Create rectangle for clipping region.
Rectangle clipRect = Rectangle(0,0,100,100);
// Set clipping region of graphics to rectangle.
e->Graphics->SetClip( clipRect );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipRectangle(PaintEventArgs e)
{
// Create rectangle for clipping region.
Rectangle clipRect = new Rectangle(0, 0, 100, 100);
// Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipRectangle(ByVal e As PaintEventArgs)
' Create rectangle for clipping region.
Dim clipRect As New Rectangle(0, 0, 100, 100)
' Set clipping region of graphics to rectangle.
e.Graphics.SetClip(clipRect)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Gilt für:
SetClip(Graphics)
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
public:
void SetClip(System::Drawing::Graphics ^ g);
public void SetClip (System.Drawing.Graphics g);
member this.SetClip : System.Drawing.Graphics -> unit
Public Sub SetClip (g As Graphics)
Parameter
Beispiele
Das folgende Codebeispiel ist für die Verwendung mit Windows Forms konzipiert und erfordert PaintEventArgse
, was ein Parameter des Paint Ereignishandlers ist, sowie thisForm
, für Form das Beispiel. Der Code führt die folgenden Aktionen aus:
Erstellt eine temporäre Graphics aus dem
thisForm
Form des Beispiels.Legt den Beschneidungsbereich des temporären Graphics auf ein kleines Quadrat fest.
Updates den Beschneidungsbereich des Grafikobjekts des Formulars zu dem des temporären Graphics.
Füllt ein großes Rechteck mit einem schwarzen Pinsel aus.
Das Ergebnis ist ein kleines, gefülltes, schwarzes Quadrat.
public:
void SetClipGraphics( PaintEventArgs^ e )
{
// Create temporary graphics object and set its clipping region.
Graphics^ newGraphics = this->CreateGraphics();
newGraphics->SetClip( Rectangle(0,0,100,100) );
// Update clipping region of graphics to clipping region of new
// graphics.
e->Graphics->SetClip( newGraphics );
// Fill rectangle to demonstrate clip region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
// Release new graphics.
delete newGraphics;
}
private void SetClipGraphics(PaintEventArgs e)
{
// Create temporary graphics object and set its clipping region.
Graphics newGraphics = this.CreateGraphics();
newGraphics.SetClip(new Rectangle(0, 0, 100, 100));
// Update clipping region of graphics to clipping region of new
// graphics.
e.Graphics.SetClip(newGraphics);
// Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
// Release new graphics.
newGraphics.Dispose();
}
Private Sub SetClipGraphics(ByVal e As PaintEventArgs)
' Create temporary graphics object and set its clipping region.
Dim newGraphics As Graphics = Me.CreateGraphics()
newGraphics.SetClip(New Rectangle(0, 0, 100, 100))
' Update clipping region of graphics to clipping region of new
' graphics.
e.Graphics.SetClip(newGraphics)
' Fill rectangle to demonstrate clip region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
' Release new graphics.
newGraphics.Dispose()
End Sub
Gilt für:
SetClip(GraphicsPath)
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
Legt den Ausschneidebereich dieses Graphics auf den angegebenen GraphicsPath fest.
public:
void SetClip(System::Drawing::Drawing2D::GraphicsPath ^ path);
public void SetClip (System.Drawing.Drawing2D.GraphicsPath path);
member this.SetClip : System.Drawing.Drawing2D.GraphicsPath -> unit
Public Sub SetClip (path As GraphicsPath)
Parameter
- path
- GraphicsPath
GraphicsPath, der den neuen Ausschneidebereich darstellt.
Beispiele
Das folgende Codebeispiel ist für die Verwendung mit Windows Forms konzipiert und erfordert PaintEventArgse
, was ein Parameter des Paint Ereignishandlers ist. Der Code führt die folgenden Aktionen aus:
Erstellt einen Grafikpfad und fügt dem Pfad eine Ellipse hinzu.
Legt den Clippingbereich auf den elliptischen Pfad fest.
Füllt ein großes Rechteck mit einem schwarzen Pinsel aus.
Das Ergebnis ist eine gefüllte schwarze Ellipse.
public:
void SetClipPath( PaintEventArgs^ e )
{
// Create graphics path.
GraphicsPath^ clipPath = gcnew GraphicsPath;
clipPath->AddEllipse( 0, 0, 200, 100 );
// Set clipping region to path.
e->Graphics->SetClip( clipPath );
// Fill rectangle to demonstrate clipping region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipPath(PaintEventArgs e)
{
// Create graphics path.
GraphicsPath clipPath = new GraphicsPath();
clipPath.AddEllipse(0, 0, 200, 100);
// Set clipping region to path.
e.Graphics.SetClip(clipPath);
// Fill rectangle to demonstrate clipping region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipPath(ByVal e As PaintEventArgs)
' Create graphics path.
Dim clipPath As New GraphicsPath
clipPath.AddEllipse(0, 0, 200, 100)
' Set clipping region to path.
e.Graphics.SetClip(clipPath)
' Fill rectangle to demonstrate clipping region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Hinweise
Wenn der durch den path
Parameter dargestellte Grafikpfad nicht geschlossen wird, wird ein zusätzliches Segment vom letzten Punkt bis zum ersten Punkt hinzugefügt, um den Pfad zu schließen.
Gilt für:
SetClip(GraphicsPath, CombineMode)
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
- Quelle:
- Graphics.cs
Legt den Ausschneidebereich dieses Graphics auf das Ergebnis des angegebenen Vorgangs fest, indem der aktuelle Ausschneidebereich und der angegebene GraphicsPath kombiniert werden.
public:
void SetClip(System::Drawing::Drawing2D::GraphicsPath ^ path, System::Drawing::Drawing2D::CombineMode combineMode);
public void SetClip (System.Drawing.Drawing2D.GraphicsPath path, System.Drawing.Drawing2D.CombineMode combineMode);
member this.SetClip : System.Drawing.Drawing2D.GraphicsPath * System.Drawing.Drawing2D.CombineMode -> unit
Public Sub SetClip (path As GraphicsPath, combineMode As CombineMode)
Parameter
- path
- GraphicsPath
Zu kombinierender GraphicsPath.
- combineMode
- CombineMode
Member der CombineMode-Enumeration, der die zu verwendende Operation zum Kombinieren angibt.
Beispiele
Das folgende Codebeispiel ist für die Verwendung mit Windows Forms konzipiert und erfordert PaintEventArgse
, was ein Parameter des Paint Ereignishandlers ist. Der Code führt die folgenden Aktionen aus:
Erstellt einen Grafikpfad und fügt dem Pfad eine Ellipse hinzu.
Legt den Clippingbereich auf den elliptischen Pfad mit dem Replace Member fest.
Füllt ein großes Rechteck mit einem schwarzen Pinsel aus.
Das Ergebnis ist eine gefüllte schwarze Ellipse.
public:
void SetClipPathCombine( PaintEventArgs^ e )
{
// Create graphics path.
GraphicsPath^ clipPath = gcnew GraphicsPath;
clipPath->AddEllipse( 0, 0, 200, 100 );
// Set clipping region to path.
e->Graphics->SetClip( clipPath, CombineMode::Replace );
// Fill rectangle to demonstrate clipping region.
e->Graphics->FillRectangle( gcnew SolidBrush( Color::Black ), 0, 0, 500, 300 );
}
private void SetClipPathCombine(PaintEventArgs e)
{
// Create graphics path.
GraphicsPath clipPath = new GraphicsPath();
clipPath.AddEllipse(0, 0, 200, 100);
// Set clipping region to path.
e.Graphics.SetClip(clipPath, CombineMode.Replace);
// Fill rectangle to demonstrate clipping region.
e.Graphics.FillRectangle(new SolidBrush(Color.Black), 0, 0, 500, 300);
}
Private Sub SetClipPathCombine(ByVal e As PaintEventArgs)
' Create graphics path.
Dim clipPath As New GraphicsPath
clipPath.AddEllipse(0, 0, 200, 100)
' Set clipping region to path.
e.Graphics.SetClip(clipPath, CombineMode.Replace)
' Fill rectangle to demonstrate clipping region.
e.Graphics.FillRectangle(New SolidBrush(Color.Black), 0, 0, _
500, 300)
End Sub
Hinweise
Wenn der durch den path
Parameter dargestellte Grafikpfad nicht geschlossen wird, wird ein zusätzliches Segment vom letzten Punkt bis zum ersten Punkt hinzugefügt, um den Pfad zu schließen.
Gilt für:
Feedback
https://aka.ms/ContentUserFeedback.
Bald verfügbar: Im Laufe des Jahres 2024 werden wir GitHub-Issues stufenweise als Feedbackmechanismus für Inhalte abbauen und durch ein neues Feedbacksystem ersetzen. Weitere Informationen finden Sie unterFeedback senden und anzeigen für