Lazy<T> Konstruktoren
Definition
Wichtig
Einige Informationen beziehen sich auf Vorabversionen, die vor dem Release ggf. grundlegend überarbeitet werden. Microsoft übernimmt hinsichtlich der hier bereitgestellten Informationen keine Gewährleistungen, seien sie ausdrücklich oder konkludent.
Initialisiert eine neue Instanz der Lazy<T>-Klasse.
Überlädt
Lazy<T>() |
Initialisiert eine neue Instanz der Lazy<T>-Klasse. Wenn eine verzögerte Initialisierung auftritt, wird der parameterlose Konstruktor des Zieltyps verwendet. |
Lazy<T>(Boolean) |
Initialisiert eine neue Instanz der Lazy<T>-Klasse. Wenn eine verzögerte Initialisierung auftritt, werden der parameterlose Konstruktor des Zieltyps und der angegebene Initialisierungsmodus verwendet. |
Lazy<T>(Func<T>) |
Initialisiert eine neue Instanz der Lazy<T>-Klasse. Bei einer verzögerten Initialisierung wird die angegebene Initialisierungsfunktion verwendet. |
Lazy<T>(LazyThreadSafetyMode) |
Initialisiert eine neue Instanz der Lazy<T>-Klasse, die den parameterlosen Konstruktor von |
Lazy<T>(T) |
Initialisiert eine neue Instanz der Lazy<T>-Klasse, die einen vorinitialisierten angegebenen Wert verwendet. |
Lazy<T>(Func<T>, Boolean) |
Initialisiert eine neue Instanz der Lazy<T>-Klasse. Bei einer verzögerten Initialisierung werden die angegebene Initialisierungsfunktion und der angegebene Initialisierungsmodus verwendet. |
Lazy<T>(Func<T>, LazyThreadSafetyMode) |
Initialisiert eine neue Instanz der Lazy<T>-Klasse, die die angegebene Initialisierungsfunktion und den angegebenen Threadsicherheitsmodus verwendet. |
Lazy<T>()
Initialisiert eine neue Instanz der Lazy<T>-Klasse. Wenn eine verzögerte Initialisierung auftritt, wird der parameterlose Konstruktor des Zieltyps verwendet.
public:
Lazy();
public Lazy ();
Public Sub New ()
Beispiele
Im folgenden Beispiel wird die Verwendung dieses Konstruktors veranschaulicht. Es veranschaulicht auch die Verwendung des Lazy<T>(Boolean) Konstruktors (angeben true
für isThreadSafe
) und des Lazy<T>(LazyThreadSafetyMode) Konstruktors (angeben LazyThreadSafetyMode.ExecutionAndPublication für mode
). Um zu einem anderen Konstruktor zu wechseln, ändern Sie einfach, welche Konstruktoren kommentiert werden.
Im Beispiel wird eine LargeObject
-Klasse definiert, die durch einen von mehreren Threads verzögert initialisiert wird. Die beiden Schlüsselzeilen des Codes in diesem Beispiel sind die Erstellung des Initialisierers und der tatsächlichen Initialisierung. Zu Anfang der Main
-Methode wird in diesem Beispiel ein threadsicherer verzögerter Initialisierer für LargeObject
erstellt:
lazyLargeObject = new Lazy<LargeObject>();
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(true);
//lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication);
let lazyLargeObject = Lazy<LargeObject>()
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(true)
// let lazyLargeObject = Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication)
lazyLargeObject = New Lazy(Of LargeObject)()
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(True)
'lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.ExecutionAndPublication)
Im Beispiel werden drei Threads erstellt und gestartet, die für ein ManualResetEvent Objekt blockiert werden, sodass das Beispiel alle Threads gleichzeitig freigeben kann. Die ThreadProc
Methode, die von allen drei Threads verwendet wird, ruft die Value Eigenschaft auf, um die LargeObject
Instanz abzurufen:
LargeObject large = lazyLargeObject.Value;
let large = lazyLargeObject.Value
Dim large As LargeObject = lazyLargeObject.Value
Die Lazy<T> Klasse stellt eine Sperrung bereit, sodass nur ein Thread die LargeObject
Instanz erstellen darf. Im Beispiel wird veranschaulicht, dass die anderen Threads alle dieselbe Instanz erhalten.
Hinweis
Der Einfachheit halber wird in diesem Beispiel eine globale Instanz von Lazy<T> verwendet, und alle Methoden sind static
(Shared
in Visual Basic). Dies sind keine Anforderungen für die Verwendung der verzögerten Initialisierung.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>();
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(true);
//lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject.");
Console.ReadLine();
// Create and start 3 threads, passing the same blocking event to all of them.
ManualResetEvent startingGate = new ManualResetEvent(false);
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start(startingGate);
}
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(100);
startingGate.Set();
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
// Wait for the signal.
ManualResetEvent waitForStart = (ManualResetEvent) state;
waitForStart.WaitOne();
LargeObject large = lazyLargeObject.Value;
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
}
class LargeObject
{
int initBy = 0;
public int InitializedBy { get { return initBy; } }
public LargeObject()
{
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was created on thread id {0}.", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject.
LargeObject was created on thread id 4.
Initialized by thread 4; last used by thread 3.
Initialized by thread 4; last used by thread 4.
Initialized by thread 4; last used by thread 5.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject() =
let initBy = Thread.CurrentThread.ManagedThreadId
do
printfn $"LargeObject was created on thread id {initBy}."
member val Data = Array.zeroCreate<int64> 100000000 with get
member _.InitializedBy = initBy
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject>()
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(true)
// let lazyLargeObject = Lazy<LargeObject>(LazyThreadSafetyMode.ExecutionAndPublication)
let threadProc (state: obj) =
// Wait for the signal.
let waitForStart = state :?> ManualResetEvent
waitForStart.WaitOne() |> ignore
let large = lazyLargeObject.Value
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"Initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}." )
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject."""
stdin.ReadLine() |> ignore
// Create and start 3 threads, passing the same blocking event to all of them.
let startingGate = new ManualResetEvent false
let threads = [| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start startingGate
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep 100
startingGate.Set() |> ignore
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject.
//
// LargeObject was created on thread id 4.
// Initialized by thread 4 last used by thread 3.
// Initialized by thread 4 last used by thread 4.
// Initialized by thread 4 last used by thread 5.
//
// Press Enter to end the program
Imports System.Threading
Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)()
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(True)
'lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.ExecutionAndPublication)
Console.WriteLine( _
vbCrLf & "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject.")
Console.ReadLine()
' Create and start 3 threads, passing the same blocking event to all of them.
Dim startingGate As New ManualResetEvent(False)
Dim threads() As Thread = { New Thread(AddressOf ThreadProc),
New Thread(AddressOf ThreadProc), New Thread(AddressOf ThreadProc) }
For Each t As Thread In threads
t.Start(startingGate)
Next t
' Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(100)
startingGate.Set()
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
' Wait for the signal.
Dim waitForStart As ManualResetEvent = CType(state, ManualResetEvent)
waitForStart.WaitOne()
Dim large As LargeObject = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
End Sub
End Class
Class LargeObject
Private initBy As Integer = 0
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Public Sub New()
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("LargeObject was created on thread id {0}.", initBy)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject.
'
'LargeObject was created on thread id 3.
'Initialized by thread 3; last used by thread 5.
'Initialized by thread 3; last used by thread 4.
'Initialized by thread 3; last used by thread 3.
'
'Press Enter to end the program
Hinweise
Eine Instanz, die mit diesem Konstruktor erstellt wird, kann gleichzeitig von mehreren Threads verwendet werden.
Der Threadsicherheitsmodus einer Lazy<T> Instanz, die mit diesem Konstruktor initialisiert wird, ist LazyThreadSafetyMode.ExecutionAndPublication. Der Threadsicherheitsmodus beschreibt das Verhalten, wenn mehrere Threads versuchen, die Lazy<T> Instanz zu initialisieren.
Eine Lazy<T> Instanz, die mit diesem Konstruktor erstellt wird, speichert keine Ausnahmen zwischen. Weitere Informationen finden Sie unter der Lazy<T>-Klasse oder unter der System.Threading.LazyThreadSafetyMode-Enumeration.
Siehe auch
Gilt für
Lazy<T>(Boolean)
Initialisiert eine neue Instanz der Lazy<T>-Klasse. Wenn eine verzögerte Initialisierung auftritt, werden der parameterlose Konstruktor des Zieltyps und der angegebene Initialisierungsmodus verwendet.
public:
Lazy(bool isThreadSafe);
public Lazy (bool isThreadSafe);
new Lazy<'T> : bool -> Lazy<'T>
Public Sub New (isThreadSafe As Boolean)
Parameter
- isThreadSafe
- Boolean
true
, damit diese Instanz gleichzeitig von mehreren Threads verwendet werden kann; false
, damit die Instanz jeweils nur von einem Thread verwendet werden kann.
Beispiele
Im folgenden Beispiel wird die Verwendung dieses Konstruktors veranschaulicht, um einen lazy initialisierten Initializer zu erstellen, der nicht threadsicher ist, für Szenarien, in denen der Zugriff auf das lazily initialisierte Objekt auf demselben Thread auftritt. Außerdem wird die Verwendung des Lazy<T>(LazyThreadSafetyMode) Konstruktors veranschaulicht (angeben LazyThreadSafetyMode.None für mode
. Um zu einem anderen Konstruktor zu wechseln, ändern Sie einfach, welche Konstruktor auskommentiert wird.
Hinweis
Code, der veranschaulicht, wie sie diesen Konstruktor in Multithread-Szenarien verwenden (angeben true
isThreadSafe
für ), finden Sie im Beispiel für den Lazy<T>() Konstruktor.
Im Beispiel wird eine LargeObject
Klasse definiert, die lazily initialisiert wird. In der Main
Methode erstellt das Beispiel eine Lazy<T> Instanz und hält dann an. Wenn Sie die EINGABETASTE drücken, greift das Beispiel auf die Eigenschaft der Lazy<T> Instanz zu, wodurch die Value Initialisierung auftritt. Der Konstruktor der LargeObject
Klasse zeigt eine Konsolennachricht an.
Hinweis
Der Einfachheit halber wird in diesem Beispiel eine globale Instanz von Lazy<T> verwendet, und alle Methoden sind static
(Shared
in Visual Basic). Dies sind keine Anforderungen für die Verwendung der verzögerten Initialisierung.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(false);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.None);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject.");
Console.ReadLine();
LargeObject large = lazyLargeObject.Value;
large.Data[11] = 89;
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
}
class LargeObject
{
public LargeObject()
{
Console.WriteLine("LargeObject was created on thread id {0}.",
Thread.CurrentThread.ManagedThreadId);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject.
LargeObject was created on thread id 1.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject () =
do
printfn $"LargeObject was created on thread id {Thread.CurrentThread.ManagedThreadId}."
member val Data = Array.zeroCreate<int64> 100000000 with get
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject> false
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(LazyThreadSafetyMode.None)
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject."""
stdin.ReadLine() |> ignore
let large = lazyLargeObject.Value
large.Data[11] <- 89
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject.
//
// LargeObject was created on thread id 1.
//
// Press Enter to end the program
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(False)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.None);
Console.WriteLine( _
vbCrLf & "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject.")
Console.ReadLine()
Dim large As LargeObject = lazyLargeObject.Value
large.Data(11) = 89
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
End Class
Friend Class LargeObject
Public Sub New()
Console.WriteLine("LargeObject was created on thread id {0}.", _
Thread.CurrentThread.ManagedThreadId)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject.
'
'LargeObject was created on thread id 1.
'
'Press Enter to end the program
Hinweise
Der Threadsicherheitsmodus einer Lazy<T> Instanz, die mit diesem Konstruktor initialisiert wird, ist LazyThreadSafetyMode.ExecutionAndPublication dies isThreadSafe
true
der Fall; andernfalls ist LazyThreadSafetyMode.Noneder Modus . Der Threadsicherheitsmodus beschreibt das Verhalten, wenn mehrere Threads versuchen, die Lazy<T> Instanz zu initialisieren. Um den Modus anzugeben, verwenden Sie den oder Lazy<T>(LazyThreadSafetyMode) den LazyThreadSafetyMode.PublicationOnly Lazy<T>(Func<T>, LazyThreadSafetyMode) Konstruktor.
Eine Lazy<T> Instanz, die mit diesem Konstruktor erstellt wird, cachet keine Ausnahmen. Weitere Informationen finden Sie unter der Lazy<T>-Klasse oder unter der System.Threading.LazyThreadSafetyMode-Enumeration.
Siehe auch
Gilt für
Lazy<T>(Func<T>)
Initialisiert eine neue Instanz der Lazy<T>-Klasse. Bei einer verzögerten Initialisierung wird die angegebene Initialisierungsfunktion verwendet.
public:
Lazy(Func<T> ^ valueFactory);
public Lazy (Func<T> valueFactory);
new Lazy<'T> : Func<'T> -> Lazy<'T>
Public Sub New (valueFactory As Func(Of T))
Parameter
- valueFactory
- Func<T>
Der Delegat, der aufgerufen wird, um bei Bedarf den verzögert initialisierten Wert zu erzeugen.
Ausnahmen
valueFactory
ist null
.
Beispiele
Im folgenden Beispiel wird die Verwendung dieses Konstruktors veranschaulicht, um eine lazy-Initialisierung mit Ausnahmecache bereitzustellen. Außerdem wird die Verwendung des Lazy<T>(Func<T>, Boolean) Konstruktors (angeben für ) und der Lazy<T>(Func<T>, LazyThreadSafetyMode) Konstruktor (angegeben LazyThreadSafetyMode.ExecutionAndPublication true
isThreadSafe
für mode
) veranschaulicht. Um zu einem anderen Konstruktor zu wechseln, ändern Sie einfach, welche Konstruktoren auskommentiert werden.
Im Beispiel wird eine LargeObject
-Klasse definiert, die durch einen von mehreren Threads verzögert initialisiert wird. Die drei wichtigsten Codeabschnitte veranschaulichen die Erstellung des Initialisierungs-, der tatsächlichen Initialisierung und des Konstruktors der LargeObject
Klasse, die Ausnahmespeicherung veranschaulicht. Zu Anfang der Main
-Methode wird in diesem Beispiel ein threadsicherer verzögerter Initialisierer für LargeObject
erstellt:
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, true);
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication);
let lazyLargeObject = Lazy<LargeObject> initLargeObject
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, true)
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, True)
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
Das Beispiel erstellt und startet drei Threads. Die ThreadProc
Methode, die von allen drei Threads verwendet wird, ruft die Eigenschaft auf, um die Value LargeObject
Instanz abzurufen:
try
{
LargeObject large = lazyLargeObject.Value;
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
try
let large = lazyLargeObject.Value
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"Initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
Try
Dim large As LargeObject = lazyLargeObject.Value
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
Im Konstruktor der LargeObject
Klasse löst der dritte Schlüsselabschnitt des Codes eine Ausnahme aus, wenn eine LargeObject
Instanz erstellt wird, aber danach kann die Instanzerstellung auftreten:
static int instanceCount = 0;
public LargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException("Throw only ONCE.");
}
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was created on thread id {0}.", initBy);
}
type LargeObject() =
static let mutable instanceCount = 0
let initBy = Thread.CurrentThread.ManagedThreadId
do
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {initBy}."
Private Shared instanceCount As Integer = 0
Public Sub New()
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException("Throw only ONCE.")
End If
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("LargeObject was created on thread id {0}.", initBy)
End Sub
Wenn das Beispiel ausgeführt wird, wird der erste Thread, der versucht, eine Instanz eines LargeObject
Fehlers zu erstellen, und die Ausnahme wird abgefangen. Möglicherweise erwarten Sie, dass der nächste Thread eine Instanz erfolgreich erstellt würde, aber das Lazy<T> Objekt hat die Ausnahme zwischengespeichert. Aus diesem Gründen löst alle drei Threads die Ausnahme aus.
Hinweis
Der Einfachheit halber wird in diesem Beispiel eine globale Instanz von Lazy<T> verwendet, und alle Methoden sind static
(Shared
in Visual Basic). Dies sind keine Anforderungen für die Verwendung der verzögerten Initialisierung.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static LargeObject InitLargeObject()
{
return new LargeObject();
}
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, true);
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject.");
Console.ReadLine();
// Create and start 3 threads, each of which tries to use LargeObject.
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start();
}
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
try
{
LargeObject large = lazyLargeObject.Value;
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
}
}
class LargeObject
{
int initBy = 0;
public int InitializedBy { get { return initBy; } }
static int instanceCount = 0;
public LargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException("Throw only ONCE.");
}
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was created on thread id {0}.", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject.
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject() =
static let mutable instanceCount = 0
let initBy = Thread.CurrentThread.ManagedThreadId
do
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {initBy}."
member _.InitializedBy = initBy
member val Data = Array.zeroCreate<int64> 100000000
let initLargeObject () =
LargeObject()
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject> initLargeObject
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, true)
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
let threadProc _ =
try
let large = lazyLargeObject.Value
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"Initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject."""
stdin.ReadLine () |> ignore
// Create and start 3 threads, each of which tries to use LargeObject.
let threads =
[| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start()
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject.
//
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
//
// Press Enter to end the program
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Private Shared Function InitLargeObject() As LargeObject
Return New LargeObject()
End Function
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, True)
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.ExecutionAndPublication)
Console.WriteLine(vbCrLf _
& "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject.")
Console.ReadLine()
' Create and start 3 threads, each of which tries to use LargeObject.
Dim threads() As Thread = { New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc), New Thread(AddressOf ThreadProc) }
For Each t As Thread In threads
t.Start()
Next t
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
Try
Dim large As LargeObject = lazyLargeObject.Value
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
End Sub
End Class
Friend Class LargeObject
Private initBy As Integer = 0
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Private Shared instanceCount As Integer = 0
Public Sub New()
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException("Throw only ONCE.")
End If
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("LargeObject was created on thread id {0}.", initBy)
End Sub
Public Data(99999999) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject.
'
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'
'Press Enter to end the program
'
Hinweise
Eine Instanz, die mit diesem Konstruktor erstellt wird, kann gleichzeitig von mehreren Threads verwendet werden.
Der Threadsicherheitsmodus einer Lazy<T> Instanz, die mit diesem Konstruktor initialisiert wird, lautet LazyThreadSafetyMode.ExecutionAndPublication. Der Threadsicherheitsmodus beschreibt das Verhalten, wenn mehrere Threads versuchen, die Lazy<T> Instanz zu initialisieren.
Ausnahmen, die von valueFactory
ihnen ausgelöst werden, werden zwischengespeichert. Weitere Informationen finden Sie unter der Lazy<T>-Klasse oder unter der System.Threading.LazyThreadSafetyMode-Enumeration.
Siehe auch
Gilt für
Lazy<T>(LazyThreadSafetyMode)
Initialisiert eine neue Instanz der Lazy<T>-Klasse, die den parameterlosen Konstruktor von T
und den angegebenen Threadsicherheitsmodus verwendet.
public:
Lazy(System::Threading::LazyThreadSafetyMode mode);
public Lazy (System.Threading.LazyThreadSafetyMode mode);
new Lazy<'T> : System.Threading.LazyThreadSafetyMode -> Lazy<'T>
Public Sub New (mode As LazyThreadSafetyMode)
Parameter
- mode
- LazyThreadSafetyMode
Einer der Enumerationswerte, der den Threadsicherheitsmodus angibt.
Ausnahmen
mode
enthält einen ungültigen Wert.
Beispiele
Im folgenden Beispiel wird die Verwendung dieses Konstruktors veranschaulicht, um einen lazyigen Initializer zu erstellen, der es mehreren Threads ermöglicht, ein Objekt lazily zu erstellen. Mehrere Threads können beim Erstellen von Instanzen erfolgreich sein, aber alle Threads verwenden die instanz, die zuerst erstellt wurde.
Hinweis
Ein Beispiel, das veranschaulicht, wie dieser Konstruktor in Einzelthreadszenarien (angeben LazyThreadSafetyMode.None mode
für ) verwendet wird, finden Sie im Lazy<T>(Boolean) Konstruktor. Ein Beispiel, das veranschaulicht, wie sie diesen Konstruktor verwenden, um die Sperrung anstelle von Rennbedingungen in Multithread-Szenarien bereitzustellen (angeben LazyThreadSafetyMode.ExecutionAndPublication mode
für ), finden Sie im Lazy<T>() Konstruktor.
Im Beispiel wird eine LargeObject
Klasse definiert, die von mehreren Threads lazily initialisiert wird. Die drei wichtigsten Codeabschnitte veranschaulichen die Erstellung des Initialisierungs-, der tatsächlichen Initialisierung und des Konstruktors und des Finalizers der LargeObject
Klasse. Am Anfang der Main
Methode erstellt das Beispiel das Objekt, das die Lazy<T> lazy Initialisierung der LargeObject
:
lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.PublicationOnly);
let lazyLargeObject = Lazy<LargeObject> LazyThreadSafetyMode.PublicationOnly
lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.PublicationOnly)
Im Beispiel werden drei Threads erstellt und gestartet, die auf einem ManualResetEvent Objekt blockiert werden, sodass das Beispiel die Threads gleichzeitig freigeben kann. In der ThreadProc
Methode, die von allen drei Threads verwendet wird, erstellt das Aufrufen der Value Eigenschaft die LargeObject
Instanz:
LargeObject large = lazyLargeObject.Value;
let large = lazyLargeObject.Value
Dim large As LargeObject = lazyLargeObject.Value
Da der Konstruktor für die Lazy<T> angegebene LazyThreadSafetyMode.PublicationOnlyInstanz alle drei Threads zum Erstellen LargeObject
von Instanzen berechtigt sind. Im Beispiel wird dies veranschaulicht, indem Konsolennachrichten im Konstruktor und im Finalizer der LargeObject
Klasse angezeigt werden:
public LargeObject()
{
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
type LargeObject() =
let initBy = Thread.CurrentThread.ManagedThreadId
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
Public Sub New()
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Das Lazy<T> Objekt stellt jedoch sicher, dass nur eine Instanz von allen Threads verwendet wird. Die Ausgabe aus dem Beispiel zeigt, dass alle drei Threads dieselbe Instanz verwenden und auch zeigt, dass die anderen beiden Instanzen von der Garbage Collection wieder abgerufen werden können.
Hinweis
Der Einfachheit halber wird in diesem Beispiel eine globale Instanz von Lazy<T> verwendet, und alle Methoden sind static
(Shared
in Visual Basic). Dies sind keine Anforderungen für die Verwendung der verzögerten Initialisierung.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(LazyThreadSafetyMode.PublicationOnly);
// Create and start 3 threads, passing the same blocking event to all of them.
ManualResetEvent startingGate = new ManualResetEvent(false);
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start(startingGate);
}
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50);
startingGate.Set();
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine(
"\r\nThreads are complete. Running GC.Collect() to reclaim the extra instances.");
GC.Collect();
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100);
Console.WriteLine(
"\r\nNote that all three threads used the instance that was not collected.");
Console.WriteLine("Press Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
// Wait for the signal.
ManualResetEvent waitForStart = (ManualResetEvent) state;
waitForStart.WaitOne();
LargeObject large = lazyLargeObject.Value;
// The following line introduces an artificial delay, to exaggerate the race
// condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
}
class LargeObject
{
int initBy = -1;
public int InitializedBy { get { return initBy; } }
public LargeObject()
{
initBy = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
Constructor: Instance initializing on thread 4
Constructor: Instance initializing on thread 3
Constructor: Instance initializing on thread 5
LargeObject was initialized by thread 4; last used by thread 4.
LargeObject was initialized by thread 4; last used by thread 5.
LargeObject was initialized by thread 4; last used by thread 3.
Threads are complete. Running GC.Collect() to reclaim the extra instances.
Finalizer: Instance was initialized on 3
Finalizer: Instance was initialized on 5
Note that all three threads used the instance that was not collected.
Press Enter to end the program
Instance finalizing; initialized on 4
*/
open System
open System.Threading
type LargeObject() =
let initBy = Thread.CurrentThread.ManagedThreadId
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
member _.InitializedBy = initBy
member val Data = Array.zeroCreate<int64> 100000000
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject> LazyThreadSafetyMode.PublicationOnly
let threadProc (state: obj) =
// Wait for the signal.
let waitForStart = state :?> ManualResetEvent
waitForStart.WaitOne() |> ignore
let large = lazyLargeObject.Value
// The following line introduces an artificial delay, to exaggerate the race
// condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"LargeObject was initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
// Create and start 3 threads, passing the same blocking event to all of them.
let startingGate = new ManualResetEvent false
let threads =
[| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start startingGate
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep 50
startingGate.Set() |> ignore
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nThreads are complete. Running GC.Collect() to reclaim the extra instances."
GC.Collect()
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep 100
printfn "\nNote that all three threads used the instance that was not collected."
printfn "Press Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// Constructor: Instance initializing on thread 4
// Constructor: Instance initializing on thread 3
// Constructor: Instance initializing on thread 5
// LargeObject was initialized by thread 4 last used by thread 4.
// LargeObject was initialized by thread 4 last used by thread 5.
// LargeObject was initialized by thread 4 last used by thread 3.
//
// Threads are complete. Running GC.Collect() to reclaim the extra instances.
// Finalizer: Instance was initialized on 3
// Finalizer: Instance was initialized on 5
//
// Note that all three threads used the instance that was not collected.
// Press Enter to end the program
//
// Instance finalizing initialized on 4
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(LazyThreadSafetyMode.PublicationOnly)
' Create and start 3 threads, passing the same blocking event to all of them.
Dim startingGate As New ManualResetEvent(False)
Dim threads() As Thread = { _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc) _
}
For Each t As Thread In threads
t.Start(startingGate)
Next t
' Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50)
startingGate.Set()
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & _
"Threads are complete. Running GC.Collect() to reclaim the extra instances.")
GC.Collect()
' Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100)
Console.WriteLine(vbCrLf & _
"Note that all three threads used the instance that was not collected.")
Console.WriteLine("Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
' Wait for the signal.
Dim waitForStart As ManualResetEvent = CType(state, ManualResetEvent)
waitForStart.WaitOne()
Dim large As LargeObject = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine( _
"LargeObject was initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
End Sub
End Class
Friend Class LargeObject
Private initBy As Integer = -1
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Public Sub New()
initBy = Thread.CurrentThread.ManagedThreadId
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'Constructor: Instance initializing on thread 3
'Constructor: Instance initializing on thread 5
'Constructor: Instance initializing on thread 4
'LargeObject was initialized by thread 3; last used by thread 4.
'LargeObject was initialized by thread 3; last used by thread 3.
'LargeObject was initialized by thread 3; last used by thread 5.
'
'Threads are complete. Running GC.Collect() to reclaim the extra instances.
'Finalizer: Instance was initialized on 5
'Finalizer: Instance was initialized on 4
'
'Note that all three threads used the instance that was not collected.
'Press Enter to end the program
'
'Finalizer: Instance was initialized on 3
'
Hinweise
Der Threadsicherheitsmodus einer Lazy<T> Instanz beschreibt das Verhalten, wenn mehrere Threads versuchen, die Lazy<T> Instanz zu initialisieren.
Eine Lazy<T> Instanz, die mit diesem Konstruktor erstellt wird, cachet keine Ausnahmen. Weitere Informationen finden Sie unter der Lazy<T>-Klasse oder unter der System.Threading.LazyThreadSafetyMode-Enumeration.
Siehe auch
Gilt für
Lazy<T>(T)
Initialisiert eine neue Instanz der Lazy<T>-Klasse, die einen vorinitialisierten angegebenen Wert verwendet.
public:
Lazy(T value);
public Lazy (T value);
new Lazy<'T> : 'T -> Lazy<'T>
Public Sub New (value As T)
Parameter
- value
- T
Der vorinitialisierte Wert, der verwendet werdensoll.
Hinweise
Eine Instanz, die mit diesem Konstruktor erstellt wurde, kann gleichzeitig von mehreren Threads verwendet werden.
Gilt für
Lazy<T>(Func<T>, Boolean)
Initialisiert eine neue Instanz der Lazy<T>-Klasse. Bei einer verzögerten Initialisierung werden die angegebene Initialisierungsfunktion und der angegebene Initialisierungsmodus verwendet.
public:
Lazy(Func<T> ^ valueFactory, bool isThreadSafe);
public Lazy (Func<T> valueFactory, bool isThreadSafe);
new Lazy<'T> : Func<'T> * bool -> Lazy<'T>
Public Sub New (valueFactory As Func(Of T), isThreadSafe As Boolean)
Parameter
- valueFactory
- Func<T>
Der Delegat, der aufgerufen wird, um bei Bedarf den verzögert initialisierten Wert zu erzeugen.
- isThreadSafe
- Boolean
true
, damit diese Instanz gleichzeitig von mehreren Threads verwendet werden kann, false
damit diese Instanz jeweils nur von einem Thread verwendet werden kann.
Ausnahmen
valueFactory
ist null
.
Beispiele
Im folgenden Beispiel wird die Verwendung dieses Konstruktors veranschaulicht, um eine lazy-Initialisierung mit Ausnahmespeicherung bereitzustellen, in einem Szenario mit einem einzelnen Thread. Außerdem wird die Verwendung des Lazy<T> Konstruktors veranschaulicht (angeben LazyThreadSafetyMode.None für mode
). Um zu diesem Konstruktor zu wechseln, ändern Sie einfach, welche Konstruktor auskommentiert wird.
Hinweis
Code, der veranschaulicht, wie sie diesen Konstruktor in Multithread-Szenarien verwenden (angeben true
isThreadSafe
für ), finden Sie im Beispiel für den Lazy<T>(Func<T>) Konstruktor.
Im Beispiel wird eine LargeObject
-Klasse definiert, die durch einen von mehreren Threads verzögert initialisiert wird. Die drei wichtigsten Codeabschnitte veranschaulichen die Erstellung des Initialisierungs-, der tatsächlichen Initialisierung und des Konstruktors der LargeObject
Klasse, die Ausnahmespeicherung veranschaulicht. Zu Anfang der Main
-Methode wird in diesem Beispiel ein threadsicherer verzögerter Initialisierer für LargeObject
erstellt:
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, false);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.None);
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, false)
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.None)
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, False)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.None)
Im Aufruf des Konstruktors ist false
der isThreadSafe
Parameter , also nicht Lazy<T> threadsicher. Da es nicht threadsicher ist, ruft das Beispiel die Value Eigenschaft dreimal im gleichen Thread auf:
for (int i = 0; i < 3; i++)
{
try
{
LargeObject large = lazyLargeObject.Value;
large.Data[11] = 89;
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
}
for _ = 0 to 2 do
try
let large = lazyLargeObject.Value
large.Data[11] <- 89
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
For i As Integer = 0 To 2
Try
Dim large As LargeObject = lazyLargeObject.Value
large.Data(11) = 89
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
Next i
Im Konstruktor der LargeObject
Klasse löst der dritte Schlüsselabschnitt des Codes eine Ausnahme aus, wenn eine LargeObject
Instanz erstellt wird, aber danach kann die Instanzerstellung auftreten:
static bool pleaseThrow = true;
public LargeObject()
{
if (pleaseThrow)
{
pleaseThrow = false;
throw new ApplicationException("Throw only ONCE.");
}
Console.WriteLine("LargeObject was created on thread id {0}.",
Thread.CurrentThread.ManagedThreadId);
}
type LargeObject() =
static let mutable pleaseThrow = true
do
if pleaseThrow then
pleaseThrow <- false
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {Thread.CurrentThread.ManagedThreadId}."
Private Shared pleaseThrow As Boolean = True
Public Sub New()
If pleaseThrow Then
pleaseThrow = False
Throw New ApplicationException("Throw only ONCE.")
End If
Console.WriteLine("LargeObject was created on thread id {0}.", _
Thread.CurrentThread.ManagedThreadId)
End Sub
Wenn das Beispiel ausgeführt wird, schlägt der erste Versuch, eine Instanz eines LargeObject
Fehlers zu erstellen, und die Ausnahme wird abgefangen. Möglicherweise erwarten Sie, dass der nächste Versuch erfolgreich wäre, aber das Lazy<T> Objekt hat die Ausnahme zwischengespeichert. Aus diesem Gründen lösten alle drei Versuche die Ausnahme aus.
Hinweis
Der Einfachheit halber wird in diesem Beispiel eine globale Instanz von Lazy<T> verwendet, und alle Methoden sind static
(Shared
in Visual Basic). Dies sind keine Anforderungen für die Verwendung der verzögerten Initialisierung.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
static LargeObject InitLargeObject()
{
return new LargeObject();
}
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, false);
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
//lazyLargeObject = new Lazy<LargeObject>(InitLargeObject, LazyThreadSafetyMode.None);
Console.WriteLine(
"\r\nLargeObject is not created until you access the Value property of the lazy" +
"\r\ninitializer. Press Enter to create LargeObject (three tries).");
Console.ReadLine();
for (int i = 0; i < 3; i++)
{
try
{
LargeObject large = lazyLargeObject.Value;
large.Data[11] = 89;
}
catch (ApplicationException aex)
{
Console.WriteLine("Exception: {0}", aex.Message);
}
}
Console.WriteLine("\r\nPress Enter to end the program");
Console.ReadLine();
}
}
class LargeObject
{
static bool pleaseThrow = true;
public LargeObject()
{
if (pleaseThrow)
{
pleaseThrow = false;
throw new ApplicationException("Throw only ONCE.");
}
Console.WriteLine("LargeObject was created on thread id {0}.",
Thread.CurrentThread.ManagedThreadId);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject (three tries).
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Exception: Throw only ONCE.
Press Enter to end the program
*/
open System
open System.Threading
type LargeObject() =
static let mutable pleaseThrow = true
do
if pleaseThrow then
pleaseThrow <- false
raise (ApplicationException "Throw only ONCE.")
printfn $"LargeObject was created on thread id {Thread.CurrentThread.ManagedThreadId}."
member val Data = Array.zeroCreate<int64> 100000000
let initLargeObject () =
LargeObject()
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, false)
// The following lines show how to use other constructors to achieve exactly the
// same result as the previous line:
// let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.None)
printfn """
LargeObject is not created until you access the Value property of the lazy
initializer. Press Enter to create LargeObject (three tries)."""
stdin.ReadLine() |> ignore
for _ = 0 to 2 do
try
let large = lazyLargeObject.Value
large.Data[11] <- 89
with :? ApplicationException as aex ->
printfn $"Exception: {aex.Message}"
printfn "\nPress Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// LargeObject is not created until you access the Value property of the lazy
// initializer. Press Enter to create LargeObject (three tries).
//
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
// Exception: Throw only ONCE.
//
// Press Enter to end the program
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
Private Shared Function InitLargeObject() As LargeObject
Return New LargeObject()
End Function
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, False)
' The following lines show how to use other constructors to achieve exactly the
' same result as the previous line:
'lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, LazyThreadSafetyMode.None)
Console.WriteLine(vbCrLf _
& "LargeObject is not created until you access the Value property of the lazy" _
& vbCrLf & "initializer. Press Enter to create LargeObject (three tries).")
Console.ReadLine()
For i As Integer = 0 To 2
Try
Dim large As LargeObject = lazyLargeObject.Value
large.Data(11) = 89
Catch aex As ApplicationException
Console.WriteLine("Exception: {0}", aex.Message)
End Try
Next i
Console.WriteLine(vbCrLf & "Press Enter to end the program")
Console.ReadLine()
End Sub
End Class
Friend Class LargeObject
Private Shared pleaseThrow As Boolean = True
Public Sub New()
If pleaseThrow Then
pleaseThrow = False
Throw New ApplicationException("Throw only ONCE.")
End If
Console.WriteLine("LargeObject was created on thread id {0}.", _
Thread.CurrentThread.ManagedThreadId)
End Sub
Public Data(100000000) As Long
End Class
' This example produces output similar to the following:
'
'LargeObject is not created until you access the Value property of the lazy
'initializer. Press Enter to create LargeObject (three tries).
'
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'Exception: Throw only ONCE.
'
'Press Enter to end the program
'
Hinweise
Der Threadsicherheitsmodus einer Lazy<T> Instanz, die mit diesem Konstruktor initialisiert wird, ist LazyThreadSafetyMode.ExecutionAndPublication dies isThreadSafe
true
der Fall; andernfalls ist LazyThreadSafetyMode.Noneder Modus . Der Threadsicherheitsmodus beschreibt das Verhalten, wenn mehrere Threads versuchen, die Lazy<T> Instanz zu initialisieren.
Um den Modus anzugeben, verwenden Sie den oder Lazy<T>(LazyThreadSafetyMode) den LazyThreadSafetyMode.PublicationOnly Lazy<T>(Func<T>, LazyThreadSafetyMode) Konstruktor.
Ausnahmen, die von valueFactory
ihnen ausgelöst werden, werden zwischengespeichert. Weitere Informationen finden Sie unter der Lazy<T>-Klasse oder unter der System.Threading.LazyThreadSafetyMode-Enumeration.
Siehe auch
Gilt für
Lazy<T>(Func<T>, LazyThreadSafetyMode)
Initialisiert eine neue Instanz der Lazy<T>-Klasse, die die angegebene Initialisierungsfunktion und den angegebenen Threadsicherheitsmodus verwendet.
public:
Lazy(Func<T> ^ valueFactory, System::Threading::LazyThreadSafetyMode mode);
public Lazy (Func<T> valueFactory, System.Threading.LazyThreadSafetyMode mode);
new Lazy<'T> : Func<'T> * System.Threading.LazyThreadSafetyMode -> Lazy<'T>
Public Sub New (valueFactory As Func(Of T), mode As LazyThreadSafetyMode)
Parameter
- valueFactory
- Func<T>
Der Delegat, der aufgerufen wird, um bei Bedarf den verzögert initialisierten Wert zu erzeugen.
- mode
- LazyThreadSafetyMode
Einer der Enumerationswerte, der den Threadsicherheitsmodus angibt.
Ausnahmen
mode
enthält einen ungültigen Wert.
valueFactory
ist null
.
Beispiele
Im folgenden Beispiel wird die Verwendung dieses Konstruktors veranschaulicht, um einen lazyigen Initializer zu erstellen, der es mehreren Threads ermöglicht, ein Objekt lazily zu erstellen. Mehrere Threads können beim Erstellen von Instanzen erfolgreich sein, aber alle Threads verwenden die instanz, die zuerst erstellt wurde. Darüber hinaus veranschaulicht das Beispiel, dass Ausnahmen nie zwischengespeichert werden, wenn Sie LazyThreadSafetyMode.PublicationOnlyangeben, auch wenn die Initialisierung von einer Funktion anstelle des parameterlosen Konstruktors des erstellten Typs ausgeführt wird.
Hinweis
Ein Beispiel, das veranschaulicht, wie dieser Konstruktor in Einzelthreadszenarien (angeben LazyThreadSafetyMode.None mode
für ) verwendet wird, finden Sie im Lazy<T>(Boolean) Konstruktor. Ein Beispiel, das veranschaulicht, wie sie diesen Konstruktor verwenden, um die Sperrung anstelle von Rennbedingungen in Multithread-Szenarien bereitzustellen (angeben LazyThreadSafetyMode.ExecutionAndPublication mode
für ), finden Sie im Lazy<T>() Konstruktor.
Im Beispiel wird eine LargeObject
Klasse definiert, die von mehreren Threads lazily initialisiert wird. Die vier Schlüsselabschnitte des Codes veranschaulichen die Erstellung des Initialisierungs-, die tatsächliche Initialisierungsfunktion und den Konstruktor und finalizer der LargeObject
Klasse. Am Anfang der Main
Methode erstellt das Beispiel das Objekt, das die Lazy<T> lazy Initialisierung der LargeObject
:
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject,
LazyThreadSafetyMode.PublicationOnly);
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.PublicationOnly)
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, _
LazyThreadSafetyMode.PublicationOnly)
Der lazy Initializer verwendet eine Funktion zum Ausführen der Initialisierung. In diesem Fall ist eine Funktion erforderlich, da für die LargeObject
Klasse kein parameterloser Konstruktor vorhanden ist.
Im Beispiel werden drei Threads erstellt und gestartet, die auf einem ManualResetEvent Objekt blockiert werden, sodass das Beispiel die Threads gleichzeitig freigeben kann. In der ThreadProc
Methode, die von allen drei Threads verwendet wird, erstellt das Aufrufen der Value Eigenschaft die LargeObject
Instanz:
LargeObject large = null;
try
{
large = lazyLargeObject.Value;
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException ex)
{
Console.WriteLine("ApplicationException: {0}", ex.Message);
}
try
let large = lazyLargeObject.Value
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"LargeObject was initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as ex ->
printfn $"ApplicationException: {ex.Message}"
Dim large As LargeObject = Nothing
Try
large = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine( _
"LargeObject was initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch ex As ApplicationException
Console.WriteLine("ApplicationException: {0}", ex.Message)
End Try
Im dritten Schlüsselabschnitt des Codes wird die lazy Initialisierungsfunktion aufgerufen, um die LargeObject
Instanz zu erstellen. Die Funktion löst eine Ausnahme aus, wenn sie zum ersten Mal aufgerufen wird:
static int instanceCount = 0;
static LargeObject InitLargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException(
String.Format("Lazy initialization function failed on thread {0}.",
Thread.CurrentThread.ManagedThreadId));
}
return new LargeObject(Thread.CurrentThread.ManagedThreadId);
}
let mutable instanceCount = 0
let initLargeObject () =
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException $"Lazy initialization function failed on thread {Thread.CurrentThread.ManagedThreadId}.")
LargeObject Thread.CurrentThread.ManagedThreadId
Private Shared instanceCount As Integer = 0
Private Shared Function InitLargeObject() As LargeObject
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException( _
"Lazy initialization function failed on thread " & _
Thread.CurrentThread.ManagedThreadId & ".")
End If
Return New LargeObject(Thread.CurrentThread.ManagedThreadId)
End Function
Mit jeder anderen LazyThreadSafetyMode Einstellung würde eine nicht behandelte Ausnahme in der Initialisierungsfunktion zwischengespeichert. LazyThreadSafetyMode.PublicationOnly Unterdrückt jedoch die Zwischenspeicherung von Ausnahmen. Die Ausgabe aus dem Beispiel veranschaulicht, dass ein späterer Versuch, das Objekt zu initialisieren, erfolgreich ist.
Hinweis
Die Ausnahmemeldung wird in der Regel nach Nachrichten angezeigt, die angeben, dass andere Threads das Objekt erfolgreich initialisiert haben. Dies ist aufgrund der Verzögerung, die durch Auslösen und Abfangen der Ausnahme eingeführt wurde.
Da der Konstruktor für die Lazy<T> angegebene LazyThreadSafetyMode.PublicationOnlyInstanz alle drei Threads zum Erstellen LargeObject
von Instanzen berechtigt sind. Im Beispiel wird dies veranschaulicht, indem Konsolennachrichten im Konstruktor und im Finalizer der LargeObject
Klasse angezeigt werden:
public LargeObject(int initializedBy)
{
initBy = initializedBy;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
type LargeObject(initBy) =
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
Public Sub New(ByVal initializedBy As Integer)
initBy = initializedBy
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Das Lazy<T> Objekt stellt sicher, dass nur eine Instanz von allen Threads verwendet wird (außer dem Thread, in dem die Initialisierungsfunktion eine Ausnahme auslöst). Die Ausgabe aus dem Beispiel zeigt dies.
Hinweis
Der Einfachheit halber wird in diesem Beispiel eine globale Instanz von Lazy<T> verwendet, und alle Methoden sind static
(Shared
in Visual Basic). Dies sind keine Anforderungen für die Verwendung der verzögerten Initialisierung.
using System;
using System.Threading;
class Program
{
static Lazy<LargeObject> lazyLargeObject = null;
// Factory function for lazy initialization.
static int instanceCount = 0;
static LargeObject InitLargeObject()
{
if (1 == Interlocked.Increment(ref instanceCount))
{
throw new ApplicationException(
String.Format("Lazy initialization function failed on thread {0}.",
Thread.CurrentThread.ManagedThreadId));
}
return new LargeObject(Thread.CurrentThread.ManagedThreadId);
}
static void Main()
{
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
lazyLargeObject = new Lazy<LargeObject>(InitLargeObject,
LazyThreadSafetyMode.PublicationOnly);
// Create and start 3 threads, passing the same blocking event to all of them.
ManualResetEvent startingGate = new ManualResetEvent(false);
Thread[] threads = { new Thread(ThreadProc), new Thread(ThreadProc), new Thread(ThreadProc) };
foreach (Thread t in threads)
{
t.Start(startingGate);
}
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50);
startingGate.Set();
// Wait for all 3 threads to finish. (The order doesn't matter.)
foreach (Thread t in threads)
{
t.Join();
}
Console.WriteLine(
"\r\nThreads are complete. Running GC.Collect() to reclaim extra instances.");
GC.Collect();
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100);
Console.WriteLine("\r\nNote that only one instance of LargeObject was used.");
Console.WriteLine("Press Enter to end the program");
Console.ReadLine();
}
static void ThreadProc(object state)
{
// Wait for the signal.
ManualResetEvent waitForStart = (ManualResetEvent) state;
waitForStart.WaitOne();
LargeObject large = null;
try
{
large = lazyLargeObject.Value;
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5);
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock(large)
{
large.Data[0] = Thread.CurrentThread.ManagedThreadId;
Console.WriteLine("LargeObject was initialized by thread {0}; last used by thread {1}.",
large.InitializedBy, large.Data[0]);
}
}
catch (ApplicationException ex)
{
Console.WriteLine("ApplicationException: {0}", ex.Message);
}
}
}
class LargeObject
{
int initBy = -1;
public int InitializedBy { get { return initBy; } }
public LargeObject(int initializedBy)
{
initBy = initializedBy;
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy);
}
~LargeObject()
{
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy);
}
public long[] Data = new long[100000000];
}
/* This example produces output similar to the following:
Constructor: Instance initializing on thread 5
Constructor: Instance initializing on thread 4
ApplicationException: Lazy initialization function failed on thread 3.
LargeObject was initialized by thread 5; last used by thread 5.
LargeObject was initialized by thread 5; last used by thread 4.
Threads are complete. Running GC.Collect() to reclaim extra instances.
Finalizer: Instance was initialized on 4
Note that only one instance of LargeObject was used.
Press Enter to end the program
Finalizer: Instance was initialized on 5
*/
open System
open System.Threading
type LargeObject(initBy) =
do
printfn $"Constructor: Instance initializing on thread {initBy}"
override _.Finalize() =
printfn $"Finalizer: Instance was initialized on {initBy}"
member _.InitializedBy = initBy
member val Data = Array.zeroCreate<int64> 100000000 with get
// Factory function for lazy initialization.
let mutable instanceCount = 0
let initLargeObject () =
if 1 = Interlocked.Increment &instanceCount then
raise (ApplicationException $"Lazy initialization function failed on thread {Thread.CurrentThread.ManagedThreadId}.")
LargeObject Thread.CurrentThread.ManagedThreadId
// The lazy initializer is created here. LargeObject is not created until the
// ThreadProc method executes.
let lazyLargeObject = Lazy<LargeObject>(initLargeObject, LazyThreadSafetyMode.PublicationOnly)
let threadProc (state: obj) =
// Wait for the signal.
let waitForStart = state :?> ManualResetEvent
waitForStart.WaitOne() |> ignore
try
let large = lazyLargeObject.Value
// The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep 5
// IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
// object after creation. You must lock the object before accessing it,
// unless the type is thread safe. (LargeObject is not thread safe.)
lock large (fun () ->
large.Data[0] <- Thread.CurrentThread.ManagedThreadId
printfn $"LargeObject was initialized by thread {large.InitializedBy} last used by thread {large.Data[0]}.")
with :? ApplicationException as ex ->
printfn $"ApplicationException: {ex.Message}"
// Create and start 3 threads, passing the same blocking event to all of them.
let startingGate = new ManualResetEvent false
let threads =
[| Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc); Thread(ParameterizedThreadStart threadProc) |]
for t in threads do
t.Start startingGate
// Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep 50
startingGate.Set() |> ignore
// Wait for all 3 threads to finish. (The order doesn't matter.)
for t in threads do
t.Join()
printfn "\nThreads are complete. Running GC.Collect() to reclaim extra instances."
GC.Collect()
// Allow time for garbage collection, which happens asynchronously.
Thread.Sleep 100
printfn "\nNote that only one instance of LargeObject was used."
printfn "Press Enter to end the program"
stdin.ReadLine() |> ignore
// This example produces output similar to the following:
// Constructor: Instance initializing on thread 5
// Constructor: Instance initializing on thread 4
// ApplicationException: Lazy initialization function failed on thread 3.
// LargeObject was initialized by thread 5 last used by thread 5.
// LargeObject was initialized by thread 5 last used by thread 4.
//
// Threads are complete. Running GC.Collect() to reclaim extra instances.
// Finalizer: Instance was initialized on 4
//
// Note that only one instance of LargeObject was used.
// Press Enter to end the program
//
// Finalizer: Instance was initialized on 5
Imports System.Threading
Friend Class Program
Private Shared lazyLargeObject As Lazy(Of LargeObject) = Nothing
' Factory function for lazy initialization.
Private Shared instanceCount As Integer = 0
Private Shared Function InitLargeObject() As LargeObject
If 1 = Interlocked.Increment(instanceCount) Then
Throw New ApplicationException( _
"Lazy initialization function failed on thread " & _
Thread.CurrentThread.ManagedThreadId & ".")
End If
Return New LargeObject(Thread.CurrentThread.ManagedThreadId)
End Function
Shared Sub Main()
' The lazy initializer is created here. LargeObject is not created until the
' ThreadProc method executes.
lazyLargeObject = New Lazy(Of LargeObject)(AddressOf InitLargeObject, _
LazyThreadSafetyMode.PublicationOnly)
' Create and start 3 threads, passing the same blocking event to all of them.
Dim startingGate As New ManualResetEvent(False)
Dim threads() As Thread = { _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc), _
New Thread(AddressOf ThreadProc) _
}
For Each t As Thread In threads
t.Start(startingGate)
Next t
' Give all 3 threads time to start and wait, then release them all at once.
Thread.Sleep(50)
startingGate.Set()
' Wait for all 3 threads to finish. (The order doesn't matter.)
For Each t As Thread In threads
t.Join()
Next t
Console.WriteLine(vbCrLf & _
"Threads are complete. Running GC.Collect() to reclaim extra instances.")
GC.Collect()
' Allow time for garbage collection, which happens asynchronously.
Thread.Sleep(100)
Console.WriteLine(vbCrLf & "Note that only one instance of LargeObject was used.")
Console.WriteLine("Press Enter to end the program")
Console.ReadLine()
End Sub
Private Shared Sub ThreadProc(ByVal state As Object)
' Wait for the signal.
Dim waitForStart As ManualResetEvent = CType(state, ManualResetEvent)
waitForStart.WaitOne()
Dim large As LargeObject = Nothing
Try
large = lazyLargeObject.Value
' The following line introduces an artificial delay to exaggerate the race condition.
Thread.Sleep(5)
' IMPORTANT: Lazy initialization is thread-safe, but it doesn't protect the
' object after creation. You must lock the object before accessing it,
' unless the type is thread safe. (LargeObject is not thread safe.)
SyncLock large
large.Data(0) = Thread.CurrentThread.ManagedThreadId
Console.WriteLine( _
"LargeObject was initialized by thread {0}; last used by thread {1}.", _
large.InitializedBy, large.Data(0))
End SyncLock
Catch ex As ApplicationException
Console.WriteLine("ApplicationException: {0}", ex.Message)
End Try
End Sub
End Class
Friend Class LargeObject
Private initBy As Integer = -1
Public ReadOnly Property InitializedBy() As Integer
Get
Return initBy
End Get
End Property
Public Sub New(ByVal initializedBy As Integer)
initBy = initializedBy
Console.WriteLine("Constructor: Instance initializing on thread {0}", initBy)
End Sub
Protected Overrides Sub Finalize()
Console.WriteLine("Finalizer: Instance was initialized on {0}", initBy)
End Sub
Public Data(99999999) As Long
End Class
' This example produces output similar to the following:
'
'Constructor: Instance initializing on thread 4
'ApplicationException: Lazy initialization function failed on thread 3.
'Constructor: Instance initializing on thread 5
'LargeObject was initialized by thread 4; last used by thread 4.
'LargeObject was initialized by thread 4; last used by thread 5.
'
'Threads are complete. Running GC.Collect() to reclaim extra instances.
'Finalizer: Instance was initialized on 5
'
'Note that only one instance of LargeObject was used.
'Press Enter to end the program
'
'Finalizer: Instance was initialized on 4
'
Hinweise
Der Threadsicherheitsmodus einer Lazy<T> Instanz beschreibt das Verhalten, wenn mehrere Threads versuchen, die Lazy<T> Instanz zu initialisieren.
Ausnahmen, die von valueFactory
ihnen ausgelöst werden, werden zwischengespeichert, es sei denn mode
, es sei denn, es ist LazyThreadSafetyMode.PublicationOnly. Weitere Informationen finden Sie unter der Lazy<T>-Klasse oder unter der System.Threading.LazyThreadSafetyMode-Enumeration.