ElapsedEventHandler Delegat

Referenz

Definition

Namespace:: System.Timers

Assembly:: System.ComponentModel.TypeConverter.dll

Assembly:: System.dll

Assembly:: netstandard.dll

Wichtig

Einige Informationen beziehen sich auf Vorabversionen, die vor dem Release ggf. grundlegend überarbeitet werden. Microsoft übernimmt hinsichtlich der hier bereitgestellten Informationen keine Gewährleistungen, seien sie ausdrücklich oder konkludent.

Stellt die Methode zur Behandlung des Elapsed-Ereignisses eines Timer-Objekts dar.

public delegate void ElapsedEventHandler(System::Object ^ sender, ElapsedEventArgs ^ e);

public delegate void ElapsedEventHandler(object sender, ElapsedEventArgs e);

public delegate void ElapsedEventHandler(object? sender, ElapsedEventArgs e);

type ElapsedEventHandler = delegate of obj * ElapsedEventArgs -> unit

Public Delegate Sub ElapsedEventHandler(sender As Object, e As ElapsedEventArgs)

Parameter

sender: Object

Die Quelle des Ereignisses.

e: ElapsedEventArgs

Ein ElapsedEventArgs-Objekt, das die Ereignisdaten enthält.

Beispiele

Im folgenden Codebeispiel wird ein Ereignishandler für das Timer.Elapsed Ereignis eingerichtet, ein Timer erstellt und der Timer gestartet. Der Ereignishandler hat dieselbe Signatur wie der ElapsedEventHandler Delegat. Der Ereignishandler zeigt die SignalTime -Eigenschaft jedes Mal an, wenn sie ausgelöst wird.

// Use this code inside a project created with the Visual C++ > CLR > CLR Console Application template. 
// Replace the code in the default .cpp file with this code. 

#include "stdafx.h"
#using <system.dll>

using namespace System;

// To avoid confusion with other Timer classes, this sample always uses the fully-qualified
// name of System::Timers::Timer instead of a using statement for System::Timer.

public ref class Example
{
private:
    static System::Timers::Timer^ aTimer;

public:
    static void Demo()
    {
        // Normally, the timer is declared at the class level, so that it stays in scope as long as it
        // is needed. If the timer is declared in a long-running method, KeepAlive must be used to prevent
        // the JIT compiler from allowing aggressive garbage collection to occur before the method ends.
        // You can experiment with this by commenting out the class-level declaration and uncommenting 
        // the declaration below; then uncomment the GC.KeepAlive(aTimer) at the end of the method.        
        //System::Timers::Timer^ aTimer; 

        // Create a timer and set a two second interval.
        aTimer = gcnew System::Timers::Timer();
        aTimer->Interval = 2000;

        // Alternate method: create a Timer with an interval argument to the constructor.
        //aTimer = gcnew System::Timers::Timer(2000);

        // Hook up the Elapsed event for the timer. 
        aTimer->Elapsed += gcnew System::Timers::ElapsedEventHandler(Example::OnTimedEvent);

        // Have the timer fire repeated events (true is the default)
        aTimer->AutoReset = true;

        // Start the timer
        aTimer->Enabled = true;

        Console::WriteLine("Press the Enter key to exit the program at any time... ");
        Console::ReadLine();

        // If the timer is declared in a long-running method, use KeepAlive to prevent garbage collection
        // from occurring before the method ends.  
        //GC::KeepAlive(aTimer);
    }

private:
    static void OnTimedEvent(Object^ source, System::Timers::ElapsedEventArgs^ e)
    {
        Console::WriteLine("The Elapsed event was raised at {0}", e->SignalTime);
    }

};

int main()
{
    Example::Demo();
}

// This example displays output like the following: 
//       Press the Enter key to exit the program at any time... 
//       The Elapsed event was raised at 5/20/2015 8:48:58 PM 
//       The Elapsed event was raised at 5/20/2015 8:49:00 PM 
//       The Elapsed event was raised at 5/20/2015 8:49:02 PM 
//       The Elapsed event was raised at 5/20/2015 8:49:04 PM 
//       The Elapsed event was raised at 5/20/2015 8:49:06 PM

// Use this code inside a project created with the Visual C# > Windows Desktop > Console Application template.
// Replace the code in Program.cs with this code.

using System;

// To avoid confusion with other Timer classes, this sample always uses the fully-qualified
// name of System.Timers.Timer instead of a using statement for System.Timers.

public class Example
{
    private static System.Timers.Timer aTimer;

    public static void Main()
    {
        // Normally, the timer is declared at the class level, so that it stays in scope as long as it
        // is needed. If the timer is declared in a long-running method, KeepAlive must be used to prevent
        // the JIT compiler from allowing aggressive garbage collection to occur before the method ends.
        // You can experiment with this by commenting out the class-level declaration and uncommenting
        // the declaration below; then uncomment the GC.KeepAlive(aTimer) at the end of the method.
        //System.Timers.Timer aTimer;

        // Create a timer and set a two second interval.
        aTimer = new System.Timers.Timer();
        aTimer.Interval = 2000;

        // Alternate method: create a Timer with an interval argument to the constructor.
        //aTimer = new System.Timers.Timer(2000);

        // Create a timer with a two second interval.
        aTimer = new System.Timers.Timer(2000);

        // Hook up the Elapsed event for the timer.
        aTimer.Elapsed += OnTimedEvent;

        // Have the timer fire repeated events (true is the default)
        aTimer.AutoReset = true;

        // Start the timer
        aTimer.Enabled = true;

        Console.WriteLine("Press the Enter key to exit the program at any time... ");
        Console.ReadLine();

        // If the timer is declared in a long-running method, use KeepAlive to prevent garbage collection
        // from occurring before the method ends.
        //GC.KeepAlive(aTimer)
    }

    private static void OnTimedEvent(Object source, System.Timers.ElapsedEventArgs e)
    {
        Console.WriteLine("The Elapsed event was raised at {0}", e.SignalTime);
    }
}

// This example displays output like the following:
//       Press the Enter key to exit the program at any time...
//       The Elapsed event was raised at 5/20/2015 8:48:58 PM
//       The Elapsed event was raised at 5/20/2015 8:49:00 PM
//       The Elapsed event was raised at 5/20/2015 8:49:02 PM
//       The Elapsed event was raised at 5/20/2015 8:49:04 PM
//       The Elapsed event was raised at 5/20/2015 8:49:06 PM

// To avoid confusion with other Timer classes, this sample always uses the fully-qualified
// name of System.Timers.Timer instead of a using statement for System.Timers.
module Example

let mutable aTimer = new System.Timers.Timer()

let onTimedEvent source (e: System.Timers.ElapsedEventArgs) =
    printfn $"The Elapsed event was raised at {e.SignalTime}"

[<EntryPoint>]
let main _ =
    // Normally, the timer is declared at the class level, so that it stays in scope as long as it
    // is needed. If the timer is declared in a long-running method, KeepAlive must be used to prevent
    // the JIT compiler from allowing aggressive garbage collection to occur before the method ends.
    // You can experiment with this by commenting out the class-level declaration and uncommenting
    // the declaration below then uncomment the GC.KeepAlive(aTimer) at the end of the method.
    //System.Timers.Timer aTimer

    // Set a two second interval.
    aTimer.Interval <- 2000

    // Alternate method: create a Timer with an interval argument to the constructor.
    //aTimer = new System.Timers.Timer(2000)

    // Create a timer with a two second interval.
    aTimer <- new System.Timers.Timer(2000)

    // Hook up the Elapsed event for the timer.
    aTimer.Elapsed.AddHandler onTimedEvent

    // Have the timer fire repeated events (true is the default)
    aTimer.AutoReset <- true

    // Start the timer
    aTimer.Enabled <- true

    printfn "Press the Enter key to exit the program at any time... "
    stdin.ReadLine() |> ignore

    // If the timer is declared in a long-running method, use KeepAlive to prevent garbage collection
    // from occurring before the method ends.
    //GC.KeepAlive(aTimer)
    0

// This example displays output like the following:
//       Press the Enter key to exit the program at any time...
//       The Elapsed event was raised at 5/20/2015 8:48:58 PM
//       The Elapsed event was raised at 5/20/2015 8:49:00 PM
//       The Elapsed event was raised at 5/20/2015 8:49:02 PM
//       The Elapsed event was raised at 5/20/2015 8:49:04 PM
//       The Elapsed event was raised at 5/20/2015 8:49:06 PM

' Use this code inside a project created with the Visual Basic > Windows Desktop > Console Application template. 
' Replace the default code in Module1.vb with this code. Then right click the project in Solution Explorer, 
' select Properties, and set the Startup Object to Timer1. 

' To avoid confusion with other Timer classes, this sample always uses the fully-qualified
' name of System.Timers.Timer.

Public Class Module1

    Private Shared aTimer As System.Timers.Timer

    Public Shared Sub Main()
        ' Normally, the timer is declared at the class level, so that it stays in scope as long as it
        ' is needed. If the timer is declared in a long-running method, KeepAlive must be used to prevent
        ' the JIT compiler from allowing aggressive garbage collection to occur before the method ends.
        ' You can experiment with this by commenting out the class-level declaration and uncommenting 
        ' the declaration below; then uncomment the GC.KeepAlive(aTimer) at the end of the method.        
        'Dim aTimer As System.Timers.Timer 

        ' Create a timer and set a two second interval.
        aTimer = New System.Timers.Timer()
        aTimer.Interval = 2000

        ' Alternate method: create a Timer with an interval argument to the constructor.
        ' aTimer = New System.Timers.Timer(2000)

        ' Hook up the Elapsed event for the timer.  
        AddHandler aTimer.Elapsed, AddressOf OnTimedEvent

        ' Have the timer fire repeated events (true is the default)
        aTimer.AutoReset = True

        ' Start the timer
        aTimer.Enabled = True

        Console.WriteLine("Press the Enter key to exit the program at any time... ")
        Console.ReadLine()

        ' If the timer is declared in a long-running method, use KeepAlive to prevent garbage collection
        ' from occurring before the method ends. 
        'GC.KeepAlive(aTimer) 
    End Sub

    Private Shared Sub OnTimedEvent(source As Object, e As System.Timers.ElapsedEventArgs)
        Console.WriteLine("The Elapsed event was raised at {0}", e.SignalTime)
    End Sub
End Class

' This example displays output like the following: 
'       Press the Enter key to exit the program at any time... 
'       The Elapsed event was raised at 5/20/2015 8:48:58 PM 
'       The Elapsed event was raised at 5/20/2015 8:49:00 PM 
'       The Elapsed event was raised at 5/20/2015 8:49:02 PM 
'       The Elapsed event was raised at 5/20/2015 8:49:04 PM 
'       The Elapsed event was raised at 5/20/2015 8:49:06 PM

Hinweise

Wenn Sie einen ElapsedEventHandler Delegaten erstellen, identifizieren Sie die Methode, die das Timer.Elapsed Ereignis behandelt. Um dem Ereignishandler das Ereignis zuzuordnen, fügen Sie dem Ereignis eine Instanz des Delegaten hinzu. Der Ereignishandler wird bei jedem Eintreten des Ereignisses aufgerufen, sofern der Delegat nicht entfernt wird. Weitere Informationen zu Ereignishandlerdelegaten finden Sie unter Behandeln und Auslösen von Ereignissen.

Erweiterungsmethoden

GetMethodInfo(Delegate)

Ruft ein Objekt ab, das die Methode darstellt, die vom angegebenen Delegaten dargestellt wird.

Gilt für: