SIO_KEEPALIVE_VALS Control Code

Artikel
07/27/2011

The SIO_KEEPALIVE_VALS control code enables or disables the per-connection setting of the TCP keep-alive option which specifies the TCP keep-alive timeout and interval.

To perform this operation, call the WSAIoctl or WSPIoctl function with the following parameters.

int WSAIoctl(
  (socket) s,              // descriptor identifying a socket
  SIO_KEEPALIVE_VALS,                  // dwIoControlCode
  (LPVOID) lpvInBuffer,    // pointer to tcp_keepalive struct 
  (DWORD) cbInBuffer,      // length of input buffer 
  NULL,         // output buffer
  0,       // size of output buffer
  (LPDWORD) lpcbBytesReturned,    // number of bytes returned
  (LPWSAOVERLAPPED) lpOverlapped,   // OVERLAPPED structure
  (LPWSAOVERLAPPED_COMPLETION_ROUTINE) lpCompletionRoutine,  // completion routine
);

int WSPIoctl(
  (socket) s,              // descriptor identifying a socket
  SIO_KEEPALIVE_VALS,                  // dwIoControlCode
  (LPVOID) lpvInBuffer,    // pointer to tcp_keepalive struct 
  (DWORD) cbInBuffer,      // length of input buffer 
  NULL,         // output buffer
  0,       // size of output buffer
  (LPDWORD) lpcbBytesReturned,    // number of bytes returned
  (LPWSAOVERLAPPED) lpOverlapped,   // OVERLAPPED structure
  (LPWSAOVERLAPPED_COMPLETION_ROUTINE) lpCompletionRoutine,  // completion routine
  (LPWSATHREADID) lpThreadId,   // a WSATHREADID structure 
  (LPINT) lpErrno   // a pointer to the error code.
);

Parameter

s
A descriptor identifying a socket.
dwIoControlCode
The control code for the operation. Use SIO_KEEPALIVE_VALS for this operation.
lpvInBuffer
A pointer to the input buffer. This parameter should point to a tcp_keepalive structure.
cbInBuffer
The size, in bytes, of the input buffer. This parameter should equal to or greater than the size of the tcp_keepalive structure pointed to by the lpvInBuffer parameter.
lpvOutBuffer
A pointer to the output buffer. This parameter is unused for this operation.
cbOutBuffer
The size, in bytes, of the output buffer. This parameter must be set to zero.
lpcbBytesReturned
A pointer to a variable that receives the size, in bytes, of the data stored in the output buffer. This returned parameter points to a DWORD value of zero for this operation, since there is no output.
lpvOverlapped
A pointer to a WSAOVERLAPPED structure.

If socket s was created without the overlapped attribute, the lpOverlapped parameter is ignored.

If s was opened with the overlapped attribute and the lpOverlapped parameter is not NULL, the operation is performed as an overlapped (asynchronous) operation. In this case, lpOverlapped parameter must point to a valid WSAOVERLAPPED structure.

For overlapped operations, the WSAIoctl or WSPIoctl function returns immediately, and the appropriate completion method is signaled when the operation has been completed. Otherwise, the function does not return until the operation has been completed or an error occurs.
lpCompletionRoutine
A pointer to the completion routine called when the operation has been completed (ignored for non-overlapped sockets).
lpThreadId
A pointer to a WSATHREADID structure to be used by the provider in a subsequent call to WPUQueueApc. The provider should store the referenced WSATHREADID structure (not the pointer to same) until after the WPUQueueApc function returns.

Hinweis This parameter applies only to the WSPIoctl function.
lpErrno
A pointer to the error code.

Hinweis This parameter applies only to the WSPIoctl function.

Rückgabewert

If the operation completes successfully, the WSAIoctl or WSPIoctl function returns zero.

If the operation fails or is pending, the WSAIoctl or WSPIoctl function returns SOCKET_ERROR. To get extended error information, call WSAGetLastError.

Error code	Meaning
WSA_IO_PENDING	An overlapped operation was successfully initiated and completion will be indicated at a later time.
WSA_OPERATION_ABORTED	An overlapped operation was canceled due to the closure of the socket or the execution of the SIO_FLUSH IOCTL command.
WSAEFAULT	The lpOverlapped or lpCompletionRoutine parameter is not totally contained in a valid part of the user address space.
WSAEINPROGRESS	The function is invoked when a callback is in progress.
WSAEINTR	A blocking operation was interrupted.
WSAEINVAL	The dwIoControlCode parameter is not a valid command, or a specified input parameter is not acceptable, or the command is not applicable to the type of socket specified. This error is returned if the cbInBuffer parameter is less than the sizeof the tcp_keepalive structure.
WSAENETDOWN	The network subsystem has failed.
WSAENOPROTOOPT	The socket option is not supported on the specified protocol. This error is returned for a datagram socket.
WSAENOTSOCK	The descriptor s is not a socket.
WSAEOPNOTSUPP	The specified IOCTL command is not supported. This error is returned if the SIO_KEEPALIVE_VALS IOCTL is not supported by the transport provider.

Hinweise

The SIO_KEEPALIVE_VALS IOCTL is supported on Windows 2000 and later versions of the operating system.

The SIO_KEEPALIVE_VALS control code enables or disables the per-connection setting of the TCP keep-alive option which specifies the TCP keep-alive timeout and interval used for TCP keep-alive packets. For more information on the keep-alive option, see section 4.2.3.6 on the Requirements for Internet Hosts—Communication Layers specified in RFC 1122 available at the IETF website. (This resource may only be available in English.)

The lpvInBuffer parameter should point to a tcp_keepalive structure defined in the Mstcpip.h header file. This structure is defined as follows:

/* Argument structure for SIO_KEEPALIVE_VALS */
struct tcp_keepalive {
    u_long  onoff;
    u_long  keepalivetime;
    u_long  keepaliveinterval;
};

The value specified in the onoff member determines if TCP keep-alive is enabled or disabled. If the onoff member is set to a nonzero value, TCP keep-alive is enabled and the other members in the structure are used. The keepalivetime member specifies the timeout, in milliseconds, with no activity until the first keep-alive packet is sent. The keepaliveinterval member specifies the interval, in milliseconds, between when successive keep-alive packets are sent if no acknowledgement is received.

The SO_KEEPALIVE option, which is one of the SOL_SOCKET Socket Options, can also be used to enable or disable the TCP keep-alive on a connection, as well as query the current state of this option. To query whether TCP keep-alive is enabled on a socket, the getsockopt function can be called with the SO_KEEPALIVE option. To enable or disable TCP keep-alive, the setsockopt function can be called with the SO_KEEPALIVE option. If TCP keep-alive is enabled with SO_KEEPALIVE, then the default TCP settings are used for keep-alive timeout and interval unless these values have been changed using SIO_KEEPALIVE_VALS.

The default settings when a TCP socket is initialized sets the keep-alive timeout to 2 hours and the keep-alive interval to 1 second. The default system-wide value of the keep-alive timeout is controllable through the KeepAliveTime registry setting which takes a value in milliseconds. The default system-wide value of the keep-alive interval is controllable through the KeepAliveInterval registry setting which takes a value in milliseconds.

On Windows Vista and later, the number of keep-alive probes (data retransmissions) is set to 10 and cannot be changed.

On Windows Server 2003, Windows XP, and Windows 2000, the default setting for number of keep-alive probes is 5. The number of keep-alive probes is controllable through the TcpMaxDataRetransmissions and PPTPTcpMaxDataRetransmissions registry settings. The number of keep-alive probes is set to the larger of the two registry key values. If this number is 0, then keep-alive probes will not be sent. If this number is above 255, then it is adjusted to 255.