Set-DhcpServerv6Class
Set-DhcpServerv6Class
Modifies the properties of an IPv6 vendor or user class on the Dynamic Host Configuration Protocol (DHCP) server service.
Syntax
Parameter Set: Set3
Set-DhcpServerv6Class [-Name] <String> [-Type] <String> [[-Data] <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Description <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-VendorId <UInt32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Detailed Description
The Set-DhcpServerv6Class cmdlet modifies the properties of an IPv6 vendor or user class on the Dynamic Host Configuration Protocol (DHCP) server. At least one of the Description, VendorId, and Data parameter must be specified. The VendorId parameter must not be specified if a user class is being modified.
Parameters
-AsJob
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-CimSession<CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-ComputerName<String>
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Data<String>
Specifies the data for the specified vendor or user class. This parameter value is expected to be present in the request from the client belonging to the vendor class. The format for this parameter can be given as ANSI or hexadecimal.
Aliases |
none |
Required? |
false |
Position? |
3 |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
false |
-Description<String>
Specifies the description to set on the class being modified.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
false |
-Name<String>
Specifies the name of vendor or user class being modified.
Aliases |
none |
Required? |
true |
Position? |
1 |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
false |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-ThrottleLimit<Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Type<String>
Specifies the type of the class. The acceptable values for this parameter are: Vendor or User.
Aliases |
none |
Required? |
true |
Position? |
2 |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
false |
-VendorId<UInt32>
Specifies the enterprise number of the vendor class.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
false |
-Confirm
Prompts you for confirmation before running the cmdlet.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
<CommonParameters>
This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Inputs
The input type is the type of the objects that you can pipe to the cmdlet.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6Class
The
Microsoft.Management.Infrastructure.CimInstanceobject is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Outputs
The output type is the type of the objects that the cmdlet emits.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6Class
The
Microsoft.Management.Infrastructure.CimInstanceobject is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Examples
EXAMPLE 1
This example sets the data for the DHCPv6 user class for lab computers.
PS C:\> Set-DhcpServerv6Class -Name "User Class for Lab Computers" -Data "LabComputers" –Type User
EXAMPLE 2
This example sets the data and vendor identifier (ID) for the DHCPv6 vendor class for printers.
PS C:\> Set-DhcpServerv6Class -Name "Vendor Class for Printers" -Data "JetPrinters" -VendorId 100 –Type Vendor