Επεξεργασία

Κοινή χρήση μέσω


Create and manage function apps in the Flex Consumption plan

This article shows you how to create function apps hosted in the Flex Consumption plan in Azure Functions. It also shows you how to manage certain features of a Flex Consumption plan hosted app.

Function app resources are langauge-specific. Make sure to choose your preferred code development language at the beginning of the article.

Important

The Flex Consumption plan is currently in preview.

Prerequisites

Create a Flex Consumption app

This section shows you how to create a function app in the Flex Consumption plan by using either the Azure CLI, Azure portal, or Visual Studio Code. For an example of creating an app in a Flex Consumption plan using Bicep/ARM templates, see the Flex Consumption repository.

You can skip this section if you choose to instead create and deploy your app using Maven.

To support your function code, you need to create three resources:

  • A resource group, which is a logical container for related resources.
  • A Storage account, which is used to maintain state and other information about your functions.
  • A function app in the Flex Consumption plan, which provides the environment for executing your function code. A function app maps to your local function project and lets you group functions as a logical unit for easier management, deployment, and sharing of resources in the Flex Consumption plan.
  1. If you haven't done so already, sign in to Azure:

    az login
    

    The az login command signs you into your Azure account.

  2. Use the az functionapp list-flexconsumption-locations command to review the list of regions that currently support Flex Consumption.

    az functionapp list-flexconsumption-locations --output table
    
  1. Create a resource group in one of the currently supported regions:

    az group create --name <RESOURCE_GROUP> --location <REGION>
    

    In the above command, replace <RESOURCE_GROUP> with a value that's unique in your subscription and <REGION> with one of the currently supported regions. The az group create command creates a resource group.

  2. Create a general-purpose storage account in your resource group and region:

    az storage account create --name <STORAGE_NAME> --location <REGION> --resource-group <RESOURCE_GROUP> --sku Standard_LRS --allow-blob-public-access false
    

    In the previous example, replace <STORAGE_NAME> with a name that is appropriate to you and unique in Azure Storage. Names must contain three to 24 characters numbers and lowercase letters only. Standard_LRS specifies a general-purpose account, which is supported by Functions. The az storage account create command creates the storage account.

    Important

    The storage account is used to store important app data, sometimes including the application code itself. You should limit access from other apps and users to the storage account.

  3. Create the function app in Azure:

    az functionapp create --resource-group <RESOURCE_GROUP> --name <APP_NAME> --storage-account <STORAGE_NAME> --flexconsumption-location <REGION> --runtime dotnet-isolated --runtime-version 8.0 
    

    C# apps that run in-process aren't currently supported when running in a Flex Consumption plan.

    az functionapp create --resource-group <RESOURCE_GROUP> --name <APP_NAME> --storage-account <STORAGE_NAME> --flexconsumption-location <REGION> --runtime java --runtime-version 17 
    

    For Java apps, Java 11 is also currently supported.

    az functionapp create --resource-group <RESOURCE_GROUP> --name <APP_NAME> --storage-account <STORAGE_NAME> --flexconsumption-location <REGION> --runtime node --runtime-version 20 
    
    az functionapp create --resource-group <RESOURCE_GROUP> --name <APP_NAME> --storage-account <STORAGE_NAME> --flexconsumption-location <REGION> --runtime python --runtime-version 3.11 
    

    For Python apps, Python 3.10 is also currently supported.

    az functionapp create --resource-group <RESOURCE_GROUP> --name <APP_NAME> --storage-account <STORAGE_NAME> --flexconsumption-location <REGION> --runtime powershell --runtime-version 7.4 
    

    In this example, replace both <RESOURCE_GROUP> and <STORAGE_NAME> with the resource group and the name of the account you used in the previous step, respectively. Also replace <APP_NAME> with a globally unique name appropriate to you. The <APP_NAME> is also the default domain name server (DNS) domain for the function app. The az functionapp create command creates the function app in Azure.

    This command creates a function app running in the Flex Consumption plan. The specific language runtime version used is one that is currently supported in the preview.

    Because you created the app without specifying always ready instances, your app only incurs costs when actively executing functions. The command also creates an associated Azure Application Insights instance in the same resource group, with which you can monitor your function app and view logs. For more information, see Monitor Azure Functions.

    
    

Deploy your code project

You can skip this section if you choose to instead create and deploy your app using Maven.

You can choose to deploy your project code to an existing function app using various tools:

Important

Deploying to an existing function app always overwrites the contents of that app in Azure.

  1. In the command palette, enter and then select Azure Functions: Deploy to Function App.

  2. Select the function app you just created. When prompted about overwriting previous deployments, select Deploy to deploy your function code to the new function app resource.

  3. When deployment is completed, select View Output to view the creation and deployment results, including the Azure resources that you created. If you miss the notification, select the bell icon in the lower-right corner to see it again.

    Screenshot of the View Output window.

Create and deploy your app using Maven

You can use Maven to create a Flex Consumption hosted function app and required resources during deployment by modifying the pom.xml file.

  1. Create a Java code project by completing the first part of one of these quickstart articles:

  2. In your Java code project, open the pom.xml file and make these changes to create your function app in the Flex Consumption plan:

    • Change the value of <properties>.<azure.functions.maven.plugin.version> to 1.34.0.

    • In the <plugin>.<configuration> section for the azure-functions-maven-plugin, add or uncomment the <pricingTier> element as follows:

      <pricingTier>Flex Consumption</pricingTier>
      
  3. (Optional) Customize the Flex Consumption plan in your Maven deployment by also including these elements in the <plugin>.<configuration> section: .

    • <instanceSize> - sets the instance memory size for the function app. The default value is 2048.
    • <maximumInstances> - sets the highest value for the maximum instances count of the function app.
    • <alwaysReadyInstances> - sets the always ready instance counts with child elements for HTTP trigger groups (<http>), Durable Functions groups (<durable>), and other specific triggers (<my_function>). When you set any instance count greater than zero, you're charged for these instances whether your functions execute or not. For more information, see Billing.
  4. Before you can deploy, sign in to your Azure subscription using the Azure CLI.

    az login
    

    The az login command signs you into your Azure account.

  5. Use the following command to deploy your code project to a new function app in Flex Consumption.

    mvn azure-functions:deploy
    

    Maven uses settings in the pom.xml template to create your function app in a Flex Consumption plan in Azure, along with the other required resources. Should these resources already exist, the code is deployed to your function app, overwriting any existing code.

Enable virtual network integration

You can enable virtual network integration for your app in a Flex Consumption plan. The examples in this section assume that you already have created a virtual network with subnet in your account. You can enable virtual network integration when you create your app or at a later time.

Important

The Flex Consumption plan currently doesn't support subnets with names that contain underscore (_) characters.

To enable virtual networking when you create your app:

You can enable virtual network integration by running the az functionapp create command and including the --vnet and --subnet parameters.

  1. Create the virtual network and subnet, if you haven't already done so.

  2. Complete steps 1-4 in Create a Flex Consumption app to create the resources required by your app.

  3. Run the az functionapp create command, including the --vnet and --subnet parameters, as in this example:

    az functionapp create --resource-group <RESOURCE_GROUP> --name <APP_NAME> --storage-account <STORAGE_NAME> --flexconsumption-location <REGION> --runtime <RUNTIME_NAME> --runtime-version <RUNTIME_VERSION> --vnet <VNET_RESOURCE_ID> --subnet <SUBNET_NAME>
    

    The <VNET_RESOURCE_ID> value is the resource ID for the virtual network, which is in the format: /subscriptions/<SUBSCRIPTION_ID>/resourceGroups/<RESOURCER_GROUP>/providers/Microsoft.Network/virtualNetworks/<VNET_NAME>. You can use this command to get a list of virtual network IDs, filtered by <RESOURCE_GROUP>: az network vnet list --resource-group <RESOURCE_GROUP> --output tsv --query "[]".id.

For end-to-end examples of how to create apps in Flex Consumption with virtual network integration see these resources:

To modify or delete virtual network integration in an existing app:

Use the az functionapp vnet-integration add command to enable virtual network integration to an existing function app:

az functionapp vnet-integration add --resource-group <RESOURCE_GROUP> --name <APP_NAME> --vnet <VNET_RESOURCE_ID> --subnet <SUBNET_NAME>

Use the az functionapp vnet-integration remove command to disable virtual network integration in your app:

az functionapp vnet-integration remove --resource-group <RESOURCE_GROUP> --name <APP_NAME>

Use the az functionapp vnet-integration list command to list the current virtual network integrations for your app:

az functionapp vnet-integration list --resource-group <RESOURCE_GROUP> --name <APP_NAME>

When choosing a subnet, these considerations apply:

  • The subnet you choose can't already be used for other purposes, such as with private endpoints or service endpoints, or be delegated to any other hosting plan or service.
  • You can share the same subnet with more than one app running in a Flex Consumption plan. Because the networking resources are shared across all apps, one function app might impact the performance of others on the same subnet.
  • In a Flex Consumption plan, a single function app might use up to 40 IP addresses, even when the app scales beyond 40 instances. While this rule of thumb is helpful when estimating the subnet size you need, it's not strictly enforced.

Configure deployment settings

In the Flex Consumption plan, the deployment package that contains your app's code is maintained in an Azure Blob Storage container. By default, deployments use the same storage account (AzureWebJobsStorage) and connection string value used by the Functions runtime to maintain your app. The connection string is stored in the DEPLOYMENT_STORAGE_CONNECTION_STRING application setting. However, you can instead designate a blob container in a separate storage account as the deployment source for your code. You can also change the authentication method used to access the container.

A customized deployment source should meet this criteria:

  • The storage account must already exist.
  • The container to use for deployments must also exist.
  • When more than one app uses the same storage account, each should have its own deployment container. Using a unique container for each app prevents the deployment packages from being overwritten, which would happen if apps shared the same container.

When configuring deployment storage authentication, keep these considerations in mind:

  • When you use a connection string to connect to the deployment storage account, the application setting that contains the connection string must already exist.
  • When you use a user-assigned managed identity, the provided identity gets linked to the function app. The Storage Blob Data Contributor role scoped to the deployment storage account also gets assigned to the identity.
  • When you use a system-assigned managed identity, an identity gets created when a valid system-assigned identity doesn't already exist in your app. When a system-assigned identity does exists, the Storage Blob Data Contributor role scoped to the deployment storage account also gets assigned to the identity.

To configure deployment settings when you create your function app in the Flex Consumption plan:

Use the az functionapp create command and supply these additional options that customize deployment storage:

Parameter Description
--deployment-storage-name The name of the deployment storage account.
--deployment-storage-container-name The name of the container in the account to contain your app's deployment package.
--deployment-storage-auth-type The authentication type to use for connecting to the deployment storage account. Accepted values include StorageAccountConnectionString, UserAssignedIdentity, and SystemAssignedIdentity.
--deployment-storage-auth-value When using StorageAccountConnectionString, this parameter is set to the name of the application setting that contains the connection string to the deployment storage account. When using UserAssignedIdentity, this parameter is set to the name of the resource ID of the identity you want to use.

This example creates a function app in the Flex Consumption plan with a separate deployment storage account and user assigned identity:

az functionapp create --resource-group <RESOURCE_GROUP> --name <APP_NAME> --storage <STORAGE_NAME> --runtime dotnet-isolated --runtime-version 8.0 --flexconsumption-location "<REGION>" --deployment-storage-name <DEPLOYMENT_ACCCOUNT_NAME> --deployment-storage-container-name <DEPLOYMENT_CONTAINER_NAME> --deployment-storage-auth-type UserAssignedIdentity --deployment-storage-auth-value <MI_RESOURCE_ID>

You can also modify the deployment storage configuration for an existing app.

Use the az functionapp deployment config set command to modify the deployment storage configuration:

az functionapp deployment config set --resource-group <RESOURCE_GROUP> --name <APP_NAME> --deployment-storage-name <DEPLOYMENT_ACCCOUNT_NAME> --deployment-storage-container-name <DEPLOYMENT_CONTAINER_NAME>

Configure instance memory

The instance memory size used by your Flex Consumption plan can be explicitly set when you create your app. For more information about supported sizes, see Instance memory.

To set an instance memory size that's different from the default when creating your app:

Specify the --instance-memory parameter in your az functionapp create command. This example creates a C# app with an instance size of 4096:

az functionapp create --instance-memory 4096 --resource-group <RESOURCE_GROUP> --name <APP_NAME> --storage-account <STORAGE_NAME> --flexconsumption-location <REGION> --runtime dotnet-isolated --runtime-version 8.0

At any point, you can change the instance memory size setting used by your app.

This example uses the az functionapp scale config set command to change the instance memory size setting to 4,096 MB:

az functionapp scale config set --resource-group <resourceGroup> --name <APP_NAME> --instance-memory 4096

Set always ready instance counts

You can set a number of always ready instances for the Per-function scaling groups or individual functions, to keep your functions loaded and ready to execute. There are three special groups, as in per-function scaling:

  • http - all the HTTP triggered functions in the app scale together into their own instances.
  • durable - all the Durable triggered functions (Orchestration, Activity, Entity) in the app scale together into their own instances.
  • blob - all the blob (Event Grid) triggered functions in the app scale together into their own instances.

Use http, durable or blob as the name for the name value pair setting to configure always ready counts for these groups. For all other functions in the app you need to configure always ready for each individual function using the format function:<FUNCTION_NAME>=n.

Use the --always-ready-instances parameter with the az functionapp create command to define one or more always ready instance designations. This example sets the always ready instance count for all HTTP triggered functions to 5:

az functionapp create --resource-group <RESOURCE_GROUP> --name <APP_NAME> --storage <STORAGE_NAME> --runtime <LANGUAGE_RUNTIME> --runtime-version <RUNTIME_VERSION> --flexconsumption-location <REGION> --always-ready-instances http=10

This example sets the always ready instance count for all Durable trigger functions to 3 and sets the always ready instance count to 2 for a service bus triggered function named function5:

az functionapp create --resource-group <RESOURCE_GROUP> --name <APP_NAME> --storage <STORAGE_NAME> --runtime <LANGUAGE_RUNTIME> --runtime-version <RUNTIME_VERSION> --flexconsumption-location <REGION> --always-ready-instances durable=3 function:function5=2

You can also modify always ready instances on an existing app by adding or removing instance designations or by changing existing instance designation counts.

This example uses the az functionapp scale config always-ready set command to change the always ready instance count for the HTTP triggers group to 10:

az functionapp scale config always-ready set --resource-group <RESOURCE_GROUP> --name <APP_NAME> --settings http=10

To remove always ready instances, use the az functionapp scale config always-ready delete command, as in this example that removes all always ready instances from both the HTTP triggers group and also a function named hello_world:

az functionapp scale config always-ready delete --resource-group <RESOURCE_GROUP> --name <APP_NAME> --setting-names http function:hello_world

Set HTTP concurrency limits

Unless you set specific limits, HTTP concurrency defaults for Flex Consumption plan apps are determined based on your instance size setting. For more information, see HTTP trigger concurrency.

Here's how you can set HTTP concurrency limits for an existing app:

Use the az functionapp scale config set command to set specific HTTP concurrency limits for your app, regardless of instance size.

az functionapp scale config set --resource-group <RESOURCE_GROUP> --name <APP_NAME> --trigger-type http --trigger-settings perInstanceConcurrency=10

This example sets the HTTP trigger concurrency level to 10. After you specifically set an HTTP concurrency value, that value is maintained despite any changes in your app's instance size setting.

View currently supported regions

During the preview, you're only able to run on the Flex Consumption plan only in selected regions. To view the list of regions that currently support Flex Consumption plans:

  1. If you haven't done so already, sign in to Azure:

    az login
    

    The az login command signs you into your Azure account.

  2. Use the az functionapp list-flexconsumption-locations command to review the list of regions that currently support Flex Consumption.

    az functionapp list-flexconsumption-locations --output table
    

When you create an app in the Azure portal or by using Visual Studio Code, currently unsupported regions are filtered out of the region list.