Κοινή χρήση μέσω

az networkfabric l3domain

Note

This reference is part of the managednetworkfabric extension for the Azure CLI (version 2.70.0 or higher). The extension will automatically install the first time you run an az networkfabric l3domain command. Learn more about extensions.

Manage L3 Isolation Domain Resource.

Commands

Name Description Type Status
az networkfabric l3domain create

Create a L3 Isolation Domain resource.

 Extension GA
az networkfabric l3domain delete

Delete the L3 Isolation Domain resource.

 Extension GA
az networkfabric l3domain list

List all L3 Isolation Domains in the provided resource group or subscription.

 Extension GA
az networkfabric l3domain show

Show details of the provided L3 Isolation Domain resource.

 Extension GA
az networkfabric l3domain update

Update to update certain properties of the L3 Isolation Domain resource.

 Extension GA
az networkfabric l3domain update-admin-state

Enables racks for this Isolation Domain.

 Extension GA
az networkfabric l3domain wait

Place the CLI in a waiting state until a condition is met.

 Extension GA

az networkfabric l3domain create

Create a L3 Isolation Domain resource.

az networkfabric l3domain create --network-fabric-id --nf-id
                                 --resource-group
                                 --resource-name
                                 [--aggregate-route-configuration]
                                 [--annotation]
                                 [--connected-subnet-route-policy]
                                 [--location]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--redistribute-connected-subnets {False, True}]
                                 [--redistribute-static-routes {False, True}]
                                 [--route-prefix-limit]
                                 [--static-route-route-policy]
                                 [--tags]

Examples

Create a L3 Isolation Domain

az networkfabric l3domain create --resource-group "example-rg" --resource-name "example-l3domain" --location "westus3" --nf-id "/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/Microsoft.ManagedNetworkFabric/networkFabrics/example-fabricName" --redistribute-connected-subnets "True" --redistribute-static-routes "True" --aggregate-route-configuration "{ipv4Routes:[{prefix:'10.0.0.1/28'},{prefix:'10.0.0.2/28'}],ipv6Routes:[{prefix:'2fff::/64'},{prefix:'2fff::/65'}]}" --connected-subnet-route-policy "{exportRoutePolicy:{exportIpv4RoutePolicyId:'/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/microsoft.managednetworkfabric/routePolicies/example-routepolicy'}}"

Help text for sub parameters under the specific parent can be viewed by using the shorthand syntax '??'. See https://github.com/Azure/azure-cli/tree/dev/doc/shorthand_syntax.md for more about shorthand syntax.

az networkfabric l3domain create --connected-subnet-route-policy "??"

Required Parameters

--network-fabric-id --nf-id

ARM Resource ID of the Network Fabric.

Property Value
Parameter group: Properties Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--resource-name

Name of the L3 Isolation Domain.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--aggregate-route-configuration

Aggregate route configurations. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Properties Arguments
--annotation

Switch configuration description.

Property Value
Parameter group: Properties Arguments
--connected-subnet-route-policy

Connected Subnet RoutePolicy Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Properties Arguments
--location -l

The geo-location where the resource lives When not specified, the location of the resource group will be used.

Property Value
Parameter group: Resource Arguments
--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--redistribute-connected-subnets

Advertise Connected Subnets. Ex: "True" | "False".

Property Value
Parameter group: Properties Arguments
Default value: True
Accepted values: False, True
--redistribute-static-routes

Advertise Static Routes. Ex: "True" | "False".

Property Value
Parameter group: Properties Arguments
Default value: False
Accepted values: False, True
--route-prefix-limit

VRF Limit configuration. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Properties Arguments
--static-route-route-policy

Static Route - route policy. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Properties Arguments
--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Resource Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az networkfabric l3domain delete

Delete the L3 Isolation Domain resource.

az networkfabric l3domain delete [--ids]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--resource-group]
                                 [--resource-name]
                                 [--subscription]

Examples

Delete the L3 Isolation Domain

az networkfabric l3domain delete --resource-group "example-rg" --resource-name "example-l3domain"

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--resource-name

Name of the L3 Isolation Domain.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az networkfabric l3domain list

List all L3 Isolation Domains in the provided resource group or subscription.

az networkfabric l3domain list [--max-items]
                               [--next-token]
                               [--resource-group]

Examples

List the L3 Isolation Domains for Resource Group

az networkfabric l3domain list --resource-group "example-rg"

List the L3 Isolation Domains for Subscription

az networkfabric l3domain list --subscription "<subscriptionId>"

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property Value
Parameter group: Pagination Arguments
--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property Value
Parameter group: Pagination Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az networkfabric l3domain show

Show details of the provided L3 Isolation Domain resource.

az networkfabric l3domain show [--ids]
                               [--resource-group]
                               [--resource-name]
                               [--subscription]

Examples

Show the L3 Isolation Domain

az networkfabric l3domain show --resource-group "example-rg" --resource-name "example-l3domain"

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--resource-name

Name of the L3 Isolation Domain.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az networkfabric l3domain update

Update to update certain properties of the L3 Isolation Domain resource.

az networkfabric l3domain update [--aggregate-route-configuration]
                                 [--annotation]
                                 [--connected-subnet-route-policy]
                                 [--ids]
                                 [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                 [--redistribute-connected-subnets {False, True}]
                                 [--redistribute-static-routes {False, True}]
                                 [--resource-group]
                                 [--resource-name]
                                 [--route-prefix-limit]
                                 [--static-route-route-policy]
                                 [--subscription]
                                 [--tags]

Examples

Update the L3 Isolation Domain

az networkfabric l3domain update --resource-group "example-rg" --resource-name "example-l3domain" --redistribute-connected-subnets "True" --redistribute-static-routes "True" --aggregate-route-configuration "{ipv4Routes:[{prefix:'10.0.0.1/28'},{prefix:'10.0.0.2/28'}],ipv6Routes:[{prefix:'2fff::/64'},{prefix:'2fff::/65'}]}" --connected-subnet-route-policy "{exportRoutePolicy:{exportIpv4RoutePolicyId:'/subscriptions/xxxxx-xxxx-xxxx-xxxx-xxxxx/resourceGroups/example-rg/providers/microsoft.managednetworkfabric/routePolicies/example-routepolicy'}}"

Help text for sub parameters under the specific parent can be viewed by using the shorthand syntax '??'. See https://github.com/Azure/azure-cli/tree/dev/doc/shorthand_syntax.md for more about shorthand syntax.

az networkfabric l3domain update --connected-subnet-route-policy "??"

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--aggregate-route-configuration

Aggregate route configurations. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Properties Arguments
--annotation

Switch configuration description.

Property Value
Parameter group: Properties Arguments
--connected-subnet-route-policy

Connected Subnet RoutePolicy Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Properties Arguments
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--redistribute-connected-subnets

Advertise Connected Subnets. Ex: "True" | "False".

Property Value
Parameter group: Properties Arguments
Accepted values: False, True
--redistribute-static-routes

Advertise Static Routes. Ex: "True" | "False".

Property Value
Parameter group: Properties Arguments
Accepted values: False, True
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--resource-name

Name of the L3 Isolation Domain.

Property Value
Parameter group: Resource Id Arguments
--route-prefix-limit

Virtual Routing and Forwarding (VRF) Limit configuration. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Properties Arguments
--static-route-route-policy

Static Route - route policy. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Properties Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Properties Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az networkfabric l3domain update-admin-state

Enables racks for this Isolation Domain.

az networkfabric l3domain update-admin-state [--ids]
                                             [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                             [--resource-group]
                                             [--resource-ids]
                                             [--resource-name]
                                             [--state {Disable, Enable, UnderMaintenance}]
                                             [--subscription]

Examples

Update admin state of L3 Isolation Domain

az networkfabric l3domain update-admin-state --resource-group "example-rg" --resource-name "example-l3domain" --state "Enable"

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--no-wait

Do not wait for the long-running operation to finish.

Property Value
Accepted values: 0, 1, f, false, n, no, t, true, y, yes
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--resource-ids

Network Fabrics or Network Rack resource Id. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Property Value
Parameter group: Body Arguments
--resource-name

Name of the L3 Isolation Domain.

Property Value
Parameter group: Resource Id Arguments
--state

Administrative state.

Property Value
Parameter group: Body Arguments
Accepted values: Disable, Enable, UnderMaintenance
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False

az networkfabric l3domain wait

Place the CLI in a waiting state until a condition is met.

az networkfabric l3domain wait [--created]
                               [--custom]
                               [--deleted]
                               [--exists]
                               [--ids]
                               [--interval]
                               [--resource-group]
                               [--resource-name]
                               [--subscription]
                               [--timeout]
                               [--updated]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

Property Value
Parameter group: Wait Condition Arguments
--deleted

Wait until deleted.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
--exists

Wait until the resource exists.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property Value
Parameter group: Resource Id Arguments
--interval

Polling interval in seconds.

Property Value
Parameter group: Wait Condition Arguments
Default value: 30
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property Value
Parameter group: Resource Id Arguments
--resource-name

Name of the L3 Isolation Domain.

Property Value
Parameter group: Resource Id Arguments
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property Value
Parameter group: Resource Id Arguments
--timeout

Maximum wait in seconds.

Property Value
Parameter group: Wait Condition Arguments
Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Property Value
Parameter group: Wait Condition Arguments
Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

Property Value
Default value: False
--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property Value
Default value: False
--output -o

Output format.

Property Value
Default value: json
Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property Value
Default value: False