Επεξεργασία

Κοινή χρήση μέσω

Onboard non-persistent virtual desktop infrastructure (VDI) devices in Microsoft Defender XDR

  • Άρθρο

Virtual desktop infrastructure (VDI) is an IT infrastructure concept that lets end users access enterprise virtual desktops instances from almost any device (such as your personal computer, smartphone, or tablet), eliminating the need for organization to provide users with physical machines. Using VDI devices reduce cost as IT departments are no longer responsible for managing, repairing, and replacing physical endpoints. Authorized users can access the same company servers, files, apps, and services from any approved device through a secure desktop client or browser.

Like any other system in an IT environment, these too should have an Endpoint Detection and Response (EDR) and Antivirus solution to protect against advanced threats and attacks.

Applies to:

Want to experience Defender for Endpoint? Sign up for a free trial.

Note

Persistent VDI's - Onboarding a persistent VDI machine into Microsoft Defender for Endpoint is handled the same way you would onboard a physical machine, such as a desktop or laptop. Group policy, Microsoft Configuration Manager, and other methods can be used to onboard a persistent machine. In the Microsoft Defender portal, (https://security.microsoft.com) under onboarding, select your preferred onboarding method, and follow the instructions for that type. For more information see Onboarding Windows client.

Onboarding non-persistent virtual desktop infrastructure (VDI) devices

Defender for Endpoint supports non-persistent VDI session onboarding.

There might be associated challenges when onboarding VDI instances. The following are typical challenges for this scenario:

  • Instant early onboarding of a short-lived session, which must be onboarded to Defender for Endpoint prior to the actual provisioning.
  • The device name is typically reused for new sessions.

In a VDI environment, VDI instances can have short lifespans. VDI devices can appear in the Microsoft Defender portal as either single entries for each VDI instance or multiple entries for each device.

  • Single entry for each VDI instance. If the VDI instance was already onboarded to Microsoft Defender for Endpoint, and at some point deleted, and then recreated with the same host name, a new object representing this VDI instance is NOT be created in the portal.

    Note

    In this case, the same device name must be configured when the session is created, for example using an unattended answer file.

  • Multiple entries for each device - one for each VDI instance.

Important

If you're deploying non-persistent VDIs through cloning technology, make sure that your internal template VMs are not onboarded to Defender for Endpoint. This recommendation is to avoid cloned VMs from being onboarded with the same senseGuid as your template VMs, which could prevent VMs from showing up as new entries in the Devices list.

The following steps guide you through onboarding VDI devices and highlight steps for single and multiple entries.

Warning

For environments where there are low resource configurations, the VDI boot procedure might slow the Defender for Endpoint sensor onboarding.

Onboarding steps

Note

Windows Server 2016 and Windows Server 2012 R2 must be prepared by applying the installation package first using the instructions in Onboard Windows servers for this feature to work.

  1. Open the VDI configuration package .zip file (WindowsDefenderATPOnboardingPackage.zip) that you downloaded from the service onboarding wizard. You can also get the package from the Microsoft Defender portal:

    1. In the navigation pane, select Settings > Endpoints > Device management > Onboarding.

    2. Select the operating system.

    3. In the Deployment method field, select VDI onboarding scripts for non-persistent endpoints.

    4. Click Download package and save the .zip file.

  2. Copy the files from the WindowsDefenderATPOnboardingPackage folder extracted from the .zip file into the golden/primary image under the path C:\WINDOWS\System32\GroupPolicy\Machine\Scripts\Startup.

    1. If you are implementing multiple entries for each device - one for each session, copy WindowsDefenderATPOnboardingScript.cmd.

    2. If you're implementing a single entry for each device, copy both Onboard-NonPersistentMachine.ps1 and WindowsDefenderATPOnboardingScript.cmd.

    Note

    If you don't see the C:\WINDOWS\System32\GroupPolicy\Machine\Scripts\Startup folder, it might be hidden. You'll need to choose the Show hidden files and folders option from File Explorer.

  3. Open a Local Group Policy Editor window and navigate to Computer Configuration > Windows Settings > Scripts > Startup.

    Note

    Domain Group Policy may also be used for onboarding non-persistent VDI devices.

  4. Depending on the method you'd like to implement, follow the appropriate steps:

    • For single entry for each device:

      Select the PowerShell Scripts tab, then select Add (Windows Explorer opens directly in the path where you copied the onboarding script earlier). Navigate to onboarding PowerShell script Onboard-NonPersistentMachine.ps1. There's no need to specify the other file, as it is triggered automatically.

    • For multiple entries for each device:

      Select the Scripts tab, then click Add (Windows Explorer opens directly in the path where you copied the onboarding script earlier). Navigate to the onboarding bash script WindowsDefenderATPOnboardingScript.cmd.

  5. Test your solution:

    1. Create a pool with one device.

    2. Log on to device.

    3. Log off from device.

    4. Log on to device with another user.

    5. Depending on the method you'd like to implement, follow the appropriate steps:

      • For single entry for each device: Check only one entry in Microsoft Defender portal.
      • For multiple entries for each device: Check multiple entries in Microsoft Defender portal.

  6. Click Devices list on the Navigation pane.

  7. Use the search function by entering the device name and select Device as search type.

For downlevel SKUs (Windows Server 2008 R2)

Note

These instructions for other Windows server versions also apply if you are running the previous Microsoft Defender for Endpoint for Windows Server 2016 and Windows Server 2012 R2 that requires the MMA. Instructions to migrate to the new unified solution are at Server migration scenarios in Microsoft Defender for Endpoint.

The following registry is relevant only when the aim is to achieve a 'Single entry for each device'.

  1. Set registry value to:

    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Advanced Threat Protection\DeviceTagging]
"VDI"="NonPersistent"

    or using command line:

    reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows Advanced Threat Protection\DeviceTagging" /v VDI /t REG_SZ /d "NonPersistent" /f

  2. Follow the server onboarding process.

Updating virtual desktop infrastructure (VDI) images (persistent or non-persistent)

With the ability to easily deploy updates to VMs running in VDIs, we've shortened this guide to focus on how you can get updates on your machines quickly and easily. You no longer need to create and seal golden images on a periodic basis, as updates are expanded into their component bits on the host server and then downloaded directly to the VM when it's turned on.

If you have onboarded the primary image of your VDI environment (SENSE service is running), then you must offboard and clear some data before putting the image back into production.

  1. Offboard the machine.

  2. Ensure the sensor is stopped by running the following command in a CMD window:

    sc query sense

  3. Run the following commands in a CMD window::

    del "C:\ProgramData\Microsoft\Windows Defender Advanced Threat Protection\Cyber\*.*" /f /s /q
REG DELETE "HKLM\SOFTWARE\Microsoft\Windows Advanced Threat Protection" /v senseGuid /f
REG DELETE "HKLM\SOFTWARE\Microsoft\Windows Advanced Threat Protection" /v 7DC0B629-D7F6-4DB3-9BF7-64D5AAF50F1A /f
REG DELETE "HKLM\SOFTWARE\Microsoft\Windows Advanced Threat Protection\48A68F11-7A16-4180-B32C-7F974C7BD783" /f
exit

Are you using a third party for VDIs?

If you're deploying non-persistent VDIs through VMware instant cloning or similar technologies, make sure that your internal template VMs and replica VMs are not onboarded to Defender for Endpoint. If you onboard devices using the single entry method, instant clones that are provisioned from onboarded VMs might have the same senseGuid, and that can stop a new entry from being listed in the Device Inventory view (in the Microsoft Defender portal, choose Assets > Devices).

If either the primary image, template VM, or replica VM are onboarded to Defender for Endpoint using the single entry method, it will stop Defender from creating entries for new non-persistent VDIs in the Microsoft Defender portal.

Reach out to your third-party vendors for further assistance.

After onboarding devices to the service, it's important to take advantage of the included threat protection capabilities by enabling them with the following recommended configuration settings.

Next generation protection configuration

The following configuration settings are recommended:

Cloud Protection Service

  • Turn on cloud-delivered protection: Yes
  • Cloud-delivered protection level: Not configured
  • Defender Cloud Extended Timeout In Seconds: 20

Exclusions

Real-time Protection

  • Turn on all settings and set to monitor all files

Remediation

  • Number of days to keep quarantined malware: 30
  • Submit samples consent: Send all samples automatically
  • Action to take on potentially unwanted apps: Enable
  • Actions for detected threats:
    • Low threat: Clean
    • Moderate threat, High threat, Severe threat: Quarantine

Scan

  • Scan archived files: Yes
  • Use low CPU priority for scheduled scans: Not configured
  • Disable catch-up full scan: Not configured
  • Disable catchup quick scan: Not configured
  • CPU usage limit per scan: 50
  • Scan mapped network drives during full scan: Not configured
  • Run daily quick scan at: 12 PM
  • Scan type: Not configured
  • Day of week to run scheduled scan: Not configured
  • Time of day to run a scheduled scan: Not configured
  • Check for signature updates before running scan: Yes

Updates

  • Enter how often to check for security intelligence updates: 8
  • Leave other settings in default state

User experience

  • Allow user access to Microsoft Defender app: Not configured

Enable Tamper protection

  • Enable tamper protection to prevent Microsoft Defender being disabled: Enable

Attack surface reduction

  • Enable network protection: Test mode
  • Require SmartScreen for Microsoft Edge: Yes
  • Block malicious site access: Yes
  • Block unverified file download: Yes

Attack surface reduction rules

  • Configure all available rules to Audit.

Note

Blocking these activities may interrupt legitimate business processes. The best approach is setting everything to audit, identifying which ones are safe to turn on, and then enabling those settings on endpoints which do not have false positive detections.

Tip

Do you want to learn more? Engage with the Microsoft Security community in our Tech Community: Microsoft Defender for Endpoint Tech Community.