Επεξεργασία

Κοινή χρήση μέσω


Debug.WriteLine Method

Definition

Writes information about the debug to the trace listeners in the Listeners collection.

Overloads

WriteLine(String, String)

Writes a category name and message to the trace listeners in the Listeners collection.

WriteLine(String, Object[])

Writes a formatted message followed by a line terminator to the trace listeners in the Listeners collection.

WriteLine(String)

Writes a message followed by a line terminator to the trace listeners in the Listeners collection.

WriteLine(Object)

Writes the value of the object's ToString() method to the trace listeners in the Listeners collection.

WriteLine(Object, String)

Writes a category name and the value of the object's ToString() method to the trace listeners in the Listeners collection.

WriteLine(String, String)

Source:
Debug.cs
Source:
Debug.cs
Source:
Debug.cs

Writes a category name and message to the trace listeners in the Listeners collection.

public:
 static void WriteLine(System::String ^ message, System::String ^ category);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string message, string category);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string? message, string? category);
[<System.Diagnostics.Conditional("DEBUG")>]
static member WriteLine : string * string -> unit
Public Shared Sub WriteLine (message As String, category As String)

Parameters

message
String

A message to write.

category
String

A category name used to organize the output.

Attributes

Examples

The following example creates a TraceSwitch named generalSwitch. This switch is set outside of the code sample.

If the switch is set to the TraceLevel Error or higher, the example outputs the first error message to the Listeners. For information on adding a listener to the Listeners collection, see the TraceListenerCollection class.

Then, if the TraceLevel is set to Verbose, the example outputs the second error message and the category on the same line as the first message. A line terminator follows the second message.

   // Class-level declaration.
   // Create a TraceSwitch.
   static TraceSwitch^ generalSwitch = 
      gcnew TraceSwitch( "General","Entire Application" );

public:
   static void MyErrorMethod( String^ category )
   {
      // Write the message if the TraceSwitch level is set to Error or higher.
      if ( generalSwitch->TraceError )
      {
         #if defined(DEBUG)
         Debug::Write( "My error message. " );
         #endif
      }
      // Write a second message if the TraceSwitch level is set to Verbose.
      if ( generalSwitch->TraceVerbose )
      {
         #if defined(DEBUG)
         Debug::WriteLine( "My second error message.", category );
         #endif
      }
   }
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");

static public void MyErrorMethod(string category)
{
    // Write the message if the TraceSwitch level is set to Error or higher.
    if (generalSwitch.TraceError)
        Debug.Write("My error message. ");

    // Write a second message if the TraceSwitch level is set to Verbose.
    if (generalSwitch.TraceVerbose)
        Debug.WriteLine("My second error message.", category);
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")


Public Shared Sub MyErrorMethod(category As String)
    ' Write the message if the TraceSwitch level is set to Error or higher.
    If generalSwitch.TraceError Then
        Debug.Write("My error message. ")
    End If 
    ' Write a second message if the TraceSwitch level is set to Verbose.
    If generalSwitch.TraceVerbose Then
        Debug.WriteLine("My second error message.", category)
    End If
End Sub

Remarks

By default, the output is written to an instance of DefaultTraceListener.

The category parameter can be used to group output messages.

This method calls the WriteLine method of the trace listener.

See also

Applies to

WriteLine(String, Object[])

Source:
Debug.cs
Source:
Debug.cs
Source:
Debug.cs

Writes a formatted message followed by a line terminator to the trace listeners in the Listeners collection.

public:
 static void WriteLine(System::String ^ format, ... cli::array <System::Object ^> ^ args);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string format, params object[] args);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string format, params object?[] args);
[<System.Diagnostics.Conditional("DEBUG")>]
static member WriteLine : string * obj[] -> unit
Public Shared Sub WriteLine (format As String, ParamArray args As Object())

Parameters

format
String

A composite format string that contains text intermixed with zero or more format items, which correspond to objects in the args array.

args
Object[]

An object array that contains zero or more objects to format.

Attributes

Remarks

This method uses the .NET composite formatting feature to convert the value of an object to its text representation and embed that representation in a string.

The params (in C#) or ParamArray (in Visual Basic) keyword in the syntax for this method implies that the object array can be a single value. The exception to this is the String object. Explicit overloads take precedence, so an arg value of a single string will default to the Debug.WriteLine(String, String) overload.

By default, the output is written to an instance of DefaultTraceListener.

This method calls the TraceListener.WriteLine method of the trace listener.

Applies to

WriteLine(String)

Source:
Debug.cs
Source:
Debug.cs
Source:
Debug.cs

Writes a message followed by a line terminator to the trace listeners in the Listeners collection.

public:
 static void WriteLine(System::String ^ message);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string message);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string? message);
[<System.Diagnostics.Conditional("DEBUG")>]
static member WriteLine : string -> unit
Public Shared Sub WriteLine (message As String)

Parameters

message
String

A message to write.

Attributes

Examples

The following example creates a TraceSwitch named generalSwitch. This switch is set outside of the code sample.

If the switch is set to the TraceLevel Error or higher, the example outputs the first error message to the Listeners. For information on adding a listener to the Listeners collection, see the TraceListenerCollection class.

Then, if the TraceLevel is set to Verbose, the example outputs the second error message on the same line as the first message. A line terminator follows the second message.

   // Class-level declaration.
   // Create a TraceSwitch.
   static TraceSwitch^ generalSwitch = 
      gcnew TraceSwitch( "General","Entire Application" );

public:
   static void MyErrorMethod()
   {
      // Write the message if the TraceSwitch level is set to Error or higher.
      if ( generalSwitch->TraceError )
      {
         #if defined(DEBUG)
         Debug::Write( "My error message. " );
         #endif
      }
      // Write a second message if the TraceSwitch level is set to Verbose.
      if ( generalSwitch->TraceVerbose )
      {
         #if defined(DEBUG)
         Debug::WriteLine( "My second error message." );
         #endif
      }
   }
// Class-level declaration.
// Create a TraceSwitch.
TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");

static void MyErrorMethod()
{
    // Write the message if the TraceSwitch level is set to Error or higher.
    if (generalSwitch.TraceError)
        Debug.Write("My error message. ");

    // Write a second message if the TraceSwitch level is set to Verbose.
    if (generalSwitch.TraceVerbose)
        Debug.WriteLine("My second error message.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")


Public Shared Sub MyErrorMethod()
    ' Write the message if the TraceSwitch level is set to Error or higher.
    If generalSwitch.TraceError Then
        Debug.Write("My error message. ")
    End If 
    ' Write a second message if the TraceSwitch level is set to Verbose.
    If generalSwitch.TraceVerbose Then
        Debug.WriteLine("My second error message.")
    End If
End Sub

Remarks

By default, the output is written to an instance of DefaultTraceListener.

This method calls the WriteLine method of the trace listener.

See also

Applies to

WriteLine(Object)

Source:
Debug.cs
Source:
Debug.cs
Source:
Debug.cs

Writes the value of the object's ToString() method to the trace listeners in the Listeners collection.

public:
 static void WriteLine(System::Object ^ value);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (object value);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (object? value);
[<System.Diagnostics.Conditional("DEBUG")>]
static member WriteLine : obj -> unit
Public Shared Sub WriteLine (value As Object)

Parameters

value
Object

An object whose name is sent to the Listeners.

Attributes

Examples

The following example creates a TraceSwitch named generalSwitch. This switch is set outside of the code sample.

If the switch is set to the TraceLevel Error or higher, the example outputs the first error message to the Listeners. For information on adding a listener to the Listeners collection, see the TraceListenerCollection class.

Then, if the TraceLevel is set to Verbose, the example outputs the name of the object on the same line as the first message. A line terminator follows the second message.

   // Class-level declaration.
   // Create a TraceSwitch.
   static TraceSwitch^ generalSwitch = 
      gcnew TraceSwitch( "General","Entire Application" );

public:
   static void MyErrorMethod( Object^ myObject )
   {
      // Write the message if the TraceSwitch level is set to Error or higher.
      if ( generalSwitch->TraceError )
      {
         #if defined(DEBUG)
         Debug::Write( "Invalid object. " );
         #endif
      }
      // Write a second message if the TraceSwitch level is set to Verbose.
      if ( generalSwitch->TraceVerbose )
      {
         #if defined(DEBUG)
         Debug::WriteLine( myObject );
         #endif
      }
   }
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");

static public void MyErrorMethod(Object myObject)
{
    // Write the message if the TraceSwitch level is set to Error or higher.
    if (generalSwitch.TraceError)
        Debug.Write("Invalid object. ");

    // Write a second message if the TraceSwitch level is set to Verbose.
    if (generalSwitch.TraceVerbose)
        Debug.WriteLine(myObject);
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")


Public Shared Sub MyErrorMethod(myObject As Object)
    ' Write the message if the TraceSwitch level is set to Error or higher.
    If generalSwitch.TraceError Then
        Debug.Write("Invalid object. ")
    End If 
    ' Write a second message if the TraceSwitch level is set to Verbose.
    If generalSwitch.TraceVerbose Then
        Debug.WriteLine(myObject)
    End If
End Sub

Remarks

By default, the output is written to an instance of DefaultTraceListener.

This method calls the WriteLine method of the trace listener.

See also

Applies to

WriteLine(Object, String)

Source:
Debug.cs
Source:
Debug.cs
Source:
Debug.cs

Writes a category name and the value of the object's ToString() method to the trace listeners in the Listeners collection.

public:
 static void WriteLine(System::Object ^ value, System::String ^ category);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (object value, string category);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (object? value, string? category);
[<System.Diagnostics.Conditional("DEBUG")>]
static member WriteLine : obj * string -> unit
Public Shared Sub WriteLine (value As Object, category As String)

Parameters

value
Object

An object whose name is sent to the Listeners.

category
String

A category name used to organize the output.

Attributes

Examples

The following example creates a TraceSwitch named generalSwitch. This switch is set outside of the code sample.

If the switch is set to the TraceLevel Error or higher, the example outputs the first error message to the Listeners. For information on adding a listener to the Listeners collection, see the TraceListenerCollection class.

Then, if the TraceLevel is set to Verbose, the example outputs the second error message on the same line as the first message. The second message is followed by a line terminator.

   // Class-level declaration.
   // Create a TraceSwitch.
   static TraceSwitch^ generalSwitch = 
      gcnew TraceSwitch( "General","Entire Application" );

public:
   static void MyErrorMethod( Object^ myObject, String^ category )
   {
      // Write the message if the TraceSwitch level is set to Error or higher.
      if ( generalSwitch->TraceError )
      {
         #if defined(DEBUG)
         Debug::Write( "Invalid object for category. " );
         #endif
      }
      // Write a second message if the TraceSwitch level is set to Verbose.
      if ( generalSwitch->TraceVerbose )
      {
         #if defined(DEBUG)
         Debug::WriteLine( myObject, category );
         #endif
      }
   }
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");

static public void MyErrorMethod(Object myObject, string category)
{
    // Write the message if the TraceSwitch level is set to Error or higher.
    if (generalSwitch.TraceError)
        Debug.Write("Invalid object for category. ");

    // Write a second message if the TraceSwitch level is set to Verbose.
    if (generalSwitch.TraceVerbose)
        Debug.WriteLine(myObject, category);
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")


Public Shared Sub MyErrorMethod(myObject As Object, category As String)
    ' Write the message if the TraceSwitch level is set to Error or higher.
    If generalSwitch.TraceError Then
        Debug.Write("Invalid object for category. ")
    End If 
    ' Write a second message if the TraceSwitch level is set to Verbose.
    If generalSwitch.TraceVerbose Then
        Debug.WriteLine(myObject, category)
    End If
End Sub

Remarks

By default, the output is written to an instance of DefaultTraceListener.

The category parameter can be used to group output messages.

This method calls the WriteLine method of the trace listener.

See also

Applies to