az workload-orchestration context site-reference

Note

This command group has commands that are defined in two or more extensions. Each extension will automatically install the first time you run an extension command. Learn more about extensions.

Manage workload orchestration site reference context.

Commands

Name	Description	Type	Status
az workload-orchestration context site-reference create (workload-orchestration extension)	Create Site Reference Resource.	Extension	GA
az workload-orchestration context site-reference create (workload-orchestration-preview extension)	Create Site Reference Resource.	Extension	GA
az workload-orchestration context site-reference delete (workload-orchestration extension)	Delete Site Reference Resource.	Extension	GA
az workload-orchestration context site-reference delete (workload-orchestration-preview extension)	Delete Site Reference Resource.	Extension	GA
az workload-orchestration context site-reference list (workload-orchestration extension)	List Site Reference Resources.	Extension	GA
az workload-orchestration context site-reference list (workload-orchestration-preview extension)	List Site Reference Resources.	Extension	GA
az workload-orchestration context site-reference show (workload-orchestration extension)	Get Site Reference Resource.	Extension	GA
az workload-orchestration context site-reference show (workload-orchestration-preview extension)	Get Site Reference Resource.	Extension	GA
az workload-orchestration context site-reference wait (workload-orchestration extension)	Place the CLI in a waiting state until a condition is met.	Extension	GA
az workload-orchestration context site-reference wait (workload-orchestration-preview extension)	Place the CLI in a waiting state until a condition is met.	Extension	GA

az workload-orchestration context site-reference create (workload-orchestration extension)

Create Site Reference Resource.

az workload-orchestration context site-reference create --context-name
                                                        --name --site-reference-name
                                                        --resource-group
                                                        [--acquire-policy-token]
                                                        [--change-reference]
                                                        [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                        [--site-id]

Examples

Create a Site Reference

az workload-orchestration context site-reference create -g {rg} -n {site_reference_name} --context-name {context_name} --site-id {site_id}

Required Parameters

--context-name

The name of the Context.

--name --site-reference-name -n

The name of the SiteReference.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--acquire-policy-token

Acquiring an Azure Policy token automatically for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--change-reference

The related change reference ID for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--site-id

Azure Resource ID for Site.

Property	Value
Parameter group:	Properties Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az workload-orchestration context site-reference create (workload-orchestration-preview extension)

Create Site Reference Resource.

az workload-orchestration context site-reference create --context-name
                                                        --name --site-reference-name
                                                        --resource-group
                                                        [--acquire-policy-token]
                                                        [--change-reference]
                                                        [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                        [--site-id]

Examples

Create a Site Reference

az workload-orchestration context site-reference create -g {rg} -n {site_reference_name} --context-name {context_name} --site-id {site_id}

Required Parameters

--context-name

The name of the Context.

--name --site-reference-name -n

The name of the SiteReference.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--acquire-policy-token

Acquiring an Azure Policy token automatically for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--change-reference

The related change reference ID for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--site-id

Azure Resource ID for Site.

Property	Value
Parameter group:	Properties Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az workload-orchestration context site-reference delete (workload-orchestration extension)

Delete Site Reference Resource.

az workload-orchestration context site-reference delete [--acquire-policy-token]
                                                        [--change-reference]
                                                        [--context-name]
                                                        [--ids]
                                                        [--name --site-reference-name]
                                                        [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                        [--resource-group]
                                                        [--subscription]
                                                        [--yes]

Examples

Delete a Site Reference

az workload-orchestration context site-reference delete -n mySiteReference -g myResourceGroup --context-name myContext

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--acquire-policy-token

Acquiring an Azure Policy token automatically for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--change-reference

The related change reference ID for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--context-name

The name of the Context.

Property	Value
Parameter group:	Resource Id Arguments

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name --site-reference-name -n

The name of the SiteReference.

Property	Value
Parameter group:	Resource Id Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--yes -y

Do not prompt for confirmation.

Property	Value
Default value:	False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az workload-orchestration context site-reference delete (workload-orchestration-preview extension)

Delete Site Reference Resource.

az workload-orchestration context site-reference delete [--acquire-policy-token]
                                                        [--change-reference]
                                                        [--context-name]
                                                        [--ids]
                                                        [--name --site-reference-name]
                                                        [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                                                        [--resource-group]
                                                        [--subscription]
                                                        [--yes]

Examples

Delete a Site Reference

az workload-orchestration context site-reference delete -n mySiteReference -g myResourceGroup --context-name myContext

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--acquire-policy-token

Acquiring an Azure Policy token automatically for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--change-reference

The related change reference ID for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--context-name

The name of the Context.

Property	Value
Parameter group:	Resource Id Arguments

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name --site-reference-name -n

The name of the SiteReference.

Property	Value
Parameter group:	Resource Id Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--yes -y

Do not prompt for confirmation.

Property	Value
Default value:	False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az workload-orchestration context site-reference list (workload-orchestration extension)

List Site Reference Resources.

az workload-orchestration context site-reference list --context-name
                                                      --resource-group
                                                      [--max-items]
                                                      [--next-token]

Examples

List Site References

az workload-orchestration context site-reference list --context-name myContext -g myResourceGroup

Required Parameters

--context-name

The name of the Context.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az workload-orchestration context site-reference list (workload-orchestration-preview extension)

List Site Reference Resources.

az workload-orchestration context site-reference list --context-name
                                                      --resource-group
                                                      [--max-items]
                                                      [--next-token]

Examples

List Site References

az workload-orchestration context site-reference list --context-name myContext -g myResourceGroup

Required Parameters

--context-name

The name of the Context.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az workload-orchestration context site-reference show (workload-orchestration extension)

Get Site Reference Resource.

az workload-orchestration context site-reference show [--context-name]
                                                      [--ids]
                                                      [--name --site-reference-name]
                                                      [--resource-group]
                                                      [--subscription]

Examples

Show a Site Reference

az workload-orchestration context site-reference show -n mySiteReference -g myResourceGroup --context-name myContext

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--context-name

The name of the Context.

Property	Value
Parameter group:	Resource Id Arguments

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name --site-reference-name -n

The name of the SiteReference.

Property	Value
Parameter group:	Resource Id Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az workload-orchestration context site-reference show (workload-orchestration-preview extension)

Get Site Reference Resource.

az workload-orchestration context site-reference show [--context-name]
                                                      [--ids]
                                                      [--name --site-reference-name]
                                                      [--resource-group]
                                                      [--subscription]

Examples

Show a Site Reference

az workload-orchestration context site-reference show -n mySiteReference -g myResourceGroup --context-name myContext

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--context-name

The name of the Context.

Property	Value
Parameter group:	Resource Id Arguments

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name --site-reference-name -n

The name of the SiteReference.

Property	Value
Parameter group:	Resource Id Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az workload-orchestration context site-reference wait (workload-orchestration extension)

Place the CLI in a waiting state until a condition is met.

az workload-orchestration context site-reference wait [--acquire-policy-token]
                                                      [--change-reference]
                                                      [--context-name]
                                                      [--created]
                                                      [--custom]
                                                      [--deleted]
                                                      [--exists]
                                                      [--ids]
                                                      [--interval]
                                                      [--name --site-reference-name]
                                                      [--resource-group]
                                                      [--subscription]
                                                      [--timeout]
                                                      [--updated]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--acquire-policy-token

Acquiring an Azure Policy token automatically for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--change-reference

The related change reference ID for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--context-name

The name of the Context.

Property	Value
Parameter group:	Resource Id Arguments

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

Property	Value
Parameter group:	Wait Condition Arguments

--deleted

Wait until deleted.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--exists

Wait until the resource exists.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--interval

Polling interval in seconds.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	30

--name --site-reference-name -n

The name of the SiteReference.

Property	Value
Parameter group:	Resource Id Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--timeout

Maximum wait in seconds.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	3600

--updated

Wait until updated with provisioningState at 'Succeeded'.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az workload-orchestration context site-reference wait (workload-orchestration-preview extension)

Place the CLI in a waiting state until a condition is met.

az workload-orchestration context site-reference wait [--acquire-policy-token]
                                                      [--change-reference]
                                                      [--context-name]
                                                      [--created]
                                                      [--custom]
                                                      [--deleted]
                                                      [--exists]
                                                      [--ids]
                                                      [--interval]
                                                      [--name --site-reference-name]
                                                      [--resource-group]
                                                      [--subscription]
                                                      [--timeout]
                                                      [--updated]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--acquire-policy-token

Acquiring an Azure Policy token automatically for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--change-reference

The related change reference ID for this resource operation.

Property	Value
Parameter group:	Global Policy Arguments

--context-name

The name of the Context.

Property	Value
Parameter group:	Resource Id Arguments

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

Property	Value
Parameter group:	Wait Condition Arguments

--deleted

Wait until deleted.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--exists

Wait until the resource exists.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--interval

Polling interval in seconds.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	30

--name --site-reference-name -n

The name of the SiteReference.

Property	Value
Parameter group:	Resource Id Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--timeout

Maximum wait in seconds.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	3600

--updated

Wait until updated with provisioningState at 'Succeeded'.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False