az network ip-group

Note

This reference is part of the ip-group extension for the Azure CLI (version 2.50.0 or higher). The extension will automatically install the first time you run an az network ip-group command. Learn more about extensions.

Commands to manage IP group.

Commands

Name	Description	Type	Status
az network ip-group create	Create an IP group.	Extension	GA
az network ip-group delete	Delete an IP group.	Extension	GA
az network ip-group list	List all of IP group.	Extension	GA
az network ip-group show	Show details of an IP group.	Extension	GA
az network ip-group update	Update an IP group.	Extension	GA
az network ip-group wait	Place the CLI in a waiting state until a condition is met.	Extension	GA

az network ip-group create

Create an IP group.

az network ip-group create --name
                           --resource-group
                           [--ip-addresses]
                           [--location]
                           [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                           [--tags]

Required Parameters

--name -n

Name of the IP group.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ip-addresses

Space-separated list of IP address or IP address prefix. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--location -l

Location. Values from: az account list-locations. You can configure the default location using az configure --defaults location=<location>.

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--tags

Resource tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network ip-group delete

Delete an IP group.

az network ip-group delete [--ids]
                           [--name]
                           [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                           [--resource-group]
                           [--subscription]
                           [--yes]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name -n

The name of the ipGroups.

Property	Value
Parameter group:	Resource Id Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--yes -y

Do not prompt for confirmation.

Property	Value
Default value:	False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network ip-group list

List all of IP group.

az network ip-group list [--max-items]
                         [--next-token]
                         [--resource-group]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--max-items

Total number of items to return in the command's output. If the total number of items available is more than the value specified, a token is provided in the command's output. To resume pagination, provide the token value in --next-token argument of a subsequent command.

Property	Value
Parameter group:	Pagination Arguments

--next-token

Token to specify where to start paginating. This is the token value from a previously truncated response.

Property	Value
Parameter group:	Pagination Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network ip-group show

Show details of an IP group.

az network ip-group show [--expand]
                         [--ids]
                         [--name]
                         [--resource-group]
                         [--subscription]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--expand

Expands resourceIds (of Firewalls/Network Security Groups etc.) back referenced by the IpGroups resource.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--name -n

The name of the ipGroups.

Property	Value
Parameter group:	Resource Id Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network ip-group update

Update an IP group.

az network ip-group update [--add]
                           [--force-string {0, 1, f, false, n, no, t, true, y, yes}]
                           [--ids]
                           [--ip-addresses]
                           [--ip-groups-name --name]
                           [--no-wait {0, 1, f, false, n, no, t, true, y, yes}]
                           [--remove]
                           [--resource-group]
                           [--set]
                           [--subscription]
                           [--tags]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

Property	Value
Parameter group:	Generic Update Arguments

--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Property	Value
Parameter group:	Generic Update Arguments
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--ip-addresses

Space-separated list of IpAddress or IpAddressPrefix. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

--ip-groups-name --name -n

The name of the ipGroups.

Property	Value
Parameter group:	Resource Id Arguments

--no-wait

Do not wait for the long-running operation to finish.

Property	Value
Accepted values:	0, 1, f, false, n, no, t, true, y, yes

--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

Property	Value
Parameter group:	Generic Update Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

Property	Value
Parameter group:	Generic Update Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags. Support shorthand-syntax, json-file and yaml-file. Try "??" to show more.

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False

az network ip-group wait

Place the CLI in a waiting state until a condition is met.

az network ip-group wait [--created]
                         [--custom]
                         [--deleted]
                         [--exists]
                         [--expand]
                         [--ids]
                         [--interval]
                         [--name]
                         [--resource-group]
                         [--subscription]
                         [--timeout]
                         [--updated]

Optional Parameters

The following parameters are optional, but depending on the context, one or more might become required for the command to execute successfully.

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

Property	Value
Parameter group:	Wait Condition Arguments

--deleted

Wait until deleted.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--exists

Wait until the resource exists.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

--expand

Expands resourceIds (of Firewalls/Network Security Groups etc.) back referenced by the IpGroups resource.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

Property	Value
Parameter group:	Resource Id Arguments

--interval

Polling interval in seconds.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	30

--name -n

The name of the ipGroups.

Property	Value
Parameter group:	Resource Id Arguments

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Property	Value
Parameter group:	Resource Id Arguments

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Property	Value
Parameter group:	Resource Id Arguments

--timeout

Maximum wait in seconds.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	3600

--updated

Wait until updated with provisioningState at 'Succeeded'.

Property	Value
Parameter group:	Wait Condition Arguments
Default value:	False

Global Parameters

--debug

Increase logging verbosity to show all debug logs.

Property	Value
Default value:	False

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

Property	Value
Default value:	False

--output -o

Output format.

Property	Value
Default value:	json
Accepted values:	json, jsonc, none, table, tsv, yaml, yamlc

--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

Property	Value
Default value:	False