Win32_NetworkAdapterConfiguration class

Article
05/14/2021

The Win32_NetworkAdapterConfiguration WMI class represents the attributes and behaviors of a network adapter. This class includes extra properties and methods that support the management of the TCP/IP protocol that are independent from the network adapter.

The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties. Properties are listed in alphabetic order, not MOF order.

Syntax

[Dynamic, Provider("CIMWin32"), UUID("{8502C515-5FBB-11D2-AAC1-006008C78BC7}"), AMENDMENT]
class Win32_NetworkAdapterConfiguration : CIM_Setting
{
  string   Caption;
  string   Description;
  string   SettingID;
  boolean  ArpAlwaysSourceRoute;
  boolean  ArpUseEtherSNAP;
  string   DatabasePath;
  boolean  DeadGWDetectEnabled;
  string   DefaultIPGateway[];
  uint8    DefaultTOS;
  uint8    DefaultTTL;
  boolean  DHCPEnabled;
  datetime DHCPLeaseExpires;
  datetime DHCPLeaseObtained;
  string   DHCPServer;
  string   DNSDomain;
  string   DNSDomainSuffixSearchOrder[];
  boolean  DNSEnabledForWINSResolution;
  string   DNSHostName;
  string   DNSServerSearchOrder[];
  boolean  DomainDNSRegistrationEnabled;
  uint32   ForwardBufferMemory;
  boolean  FullDNSRegistrationEnabled;
  uint16   GatewayCostMetric[];
  uint8    IGMPLevel;
  uint32   Index;
  uint32   InterfaceIndex;
  string   IPAddress[];
  uint32   IPConnectionMetric;
  boolean  IPEnabled;
  boolean  IPFilterSecurityEnabled;
  boolean  IPPortSecurityEnabled;
  string   IPSecPermitIPProtocols[];
  string   IPSecPermitTCPPorts[];
  string   IPSecPermitUDPPorts[];
  string   IPSubnet[];
  boolean  IPUseZeroBroadcast;
  string   IPXAddress;
  boolean  IPXEnabled;
  uint32   IPXFrameType[];
  uint32   IPXMediaType;
  string   IPXNetworkNumber[];
  string   IPXVirtualNetNumber;
  uint32   KeepAliveInterval;
  uint32   KeepAliveTime;
  string   MACAddress;
  uint32   MTU;
  uint32   NumForwardPackets;
  boolean  PMTUBHDetectEnabled;
  boolean  PMTUDiscoveryEnabled;
  string   ServiceName;
  uint32   TcpipNetbiosOptions;
  uint32   TcpMaxConnectRetransmissions;
  uint32   TcpMaxDataRetransmissions;
  uint32   TcpNumConnections;
  boolean  TcpUseRFC1122UrgentPointer;
  uint16   TcpWindowSize;
  boolean  WINSEnableLMHostsLookup;
  string   WINSHostLookupFile;
  string   WINSPrimaryServer;
  string   WINSScopeID;
  string   WINSSecondaryServer;
};

Members

The Win32_NetworkAdapterConfiguration class has these types of members:

Methods
Properties

Methods

The Win32_NetworkAdapterConfiguration class has these methods.

Method	Description
DisableIPSec	Disables IPsec on this TCP/IP-enabled network adapter.
EnableDHCP	Enables the Dynamic Host Configuration Protocol (DHCP) for service with this network adapter.
EnableDNS	Enables the Domain Name System (DNS) for service on this TCP/IP-bound network adapter.
EnableIPFilterSec	Enables IPsec globally across all IP-bound network adapters.
EnableIPSec	Enables IPsec on this specific TCP/IP-enabled network adapter.
EnableStatic	Enables static TCP/IP addressing for the target network adapter.
EnableWINS	Enables WINS settings specific to TCP/IP, but independent of the network adapter.
ReleaseDHCPLease	Releases the IP address bound to a specific DHCP-enabled network adapter.
ReleaseDHCPLeaseAll	Releases the IP addresses bound to all DHCP-enabled network adapters.
RenewDHCPLease	Renews the IP address on specific DHCP-enabled network adapters.
RenewDHCPLeaseAll	Renews the IP addresses on all DHCP-enabled network adapters.
SetArpAlwaysSourceRoute	Sets the transmission of ARP queries by the TCP/IP.
SetArpUseEtherSNAP	Enables Ethernet packets to use 802.3 SNAP encoding.
SetDatabasePath	Sets the path to the standard Internet database files (HOSTS, LMHOSTS, NETWORKS, and PROTOCOLS).
SetDeadGWDetect	Enables dead gateway detection.
SetDefaultTOS	Obsolete. This method sets the default Type of Service (TOS) value in the header of outgoing IP packets.
SetDefaultTTL	Sets the default Time to Live (TTL) value in the header of outgoing IP packets.
SetDNSDomain	Sets the DNS domain.
SetDNSServerSearchOrder	Sets the server search order as an array of elements.
SetDNSSuffixSearchOrder	Sets the suffix search order as an array of elements.
SetDynamicDNSRegistration	Indicates dynamic DNS registration of IP addresses for this IP-bound adapter.
SetForwardBufferMemory	Specifies how much memory IP allocates to store packet data in the router packet queue.
SetGateways	Specifies a list of gateways for routing packets destined for a different subnet than the one this adapter is connected to.
SetIGMPLevel	Sets the extent to which the system supports IP multicasting and participates in the Internet Group Management Protocol.
SetIPConnectionMetric	Sets the routing metric associated with this IP-bound adapter.
SetIPUseZeroBroadcast	Sets IP zero broadcast usage.
SetIPXFrameTypeNetworkPairs	Sets Internetworking Packet Exchange (IPX) network number/frame pairs for this network adapter.
SetIPXVirtualNetworkNumber	Sets the Internetworking Packet Exchange (IPX) virtual network number on the target computer system.
SetKeepAliveInterval	Sets the interval separating Keep Alive Retransmissions until a response is received.
SetKeepAliveTime	Sets how often TCP attempts to verify that an idle connection is still available by sending a Keep Alive packet.
SetMTU	Sets the default Maximum Transmission Unit (MTU) for a network interface. This method is not supported.
SetNumForwardPackets	Sets the number of IP packet headers allocated for the router packet queue.
SetPMTUBHDetect	Enables detection of Black Hole routers.
SetPMTUDiscovery	Enables Maximum Transmission Unit (MTU) discovery.
SetTcpipNetbios	Sets the default operation of NetBIOS over TCP/IP.
SetTcpMaxConnectRetransmissions	Sets the number of attempts TCP will retransmit a connect request before aborting.
SetTcpMaxDataRetransmissions	Sets the number of times TCP will retransmit an individual data segment before aborting the connection.
SetTcpNumConnections	Sets the maximum number of connections that TCP may have open simultaneously.
SetTcpUseRFC1122UrgentPointer	Specifies whether TCP uses the RFC 1122 specification for urgent data, or the mode used by Berkeley Software Design (BSD) derived systems.
SetTcpWindowSize	Sets the maximum TCP Receive Window size offered by the system.
SetWINSServer	Sets the primary and secondary Windows Internet Naming Service (WINS) servers on this TCP/IP-bound network adapter.

Properties

The Win32_NetworkAdapterConfiguration class has these properties.

ArpAlwaysSourceRoute

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|ArpAlwaysSourceRoute")

If TRUE, TCP/IP transmits Address Resolution Protocol (ARP) queries with source routing enabled on Token Ring networks. By default (FALSE), ARP first queries without source routing, and then retries with source routing enabled if no reply is received. Source routing allows the routing of network packets across different types of networks.

ArpUseEtherSNAP

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|ArpUseEtherSNAP")

If TRUE, Ethernet packets follow the IEEE 802.3 Sub-Network Access Protocol (SNAP) encoding. Setting this parameter to 1 forces TCP/IP to transmit Ethernet packets by using 802.3 SNAP encoding. By default (FALSE), the stack transmits packets in DIX Ethernet format.

Caption

Data type: string
Access type: Read-only
Qualifiers: MaxLen (64)

Short textual description of the current object.

This property is inherited from CIM_Setting.

DatabasePath

Data type: string
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|DatabasePath")

Valid Windows file path to standard Internet database files (HOSTS, LMHOSTS, NETWORKS, and PROTOCOLS). The file path is used by the Windows Sockets interface.

DeadGWDetectEnabled

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|EnableDeadGWDetect")

If TRUE, dead gateway detection occurs. With this feature enabled, Transmission Control Protocol (TCP) asks Internet Protocol (IP) to change to a backup gateway if it retransmits a segment several times without receiving a response.

DefaultIPGateway

Data type: string array
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|System\\CurrentControlSet\\Services|Parameters|DefaultGateway")

Array of IP addresses of default gateways that the computer system uses.

Example: "192.168.12.1 192.168.46.1"

DefaultTOS

Data type: uint8
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|DefaultTOS")

Default Type Of Service (TOS) value set in the header of outgoing IP packets. Request for Comments (RFC) 791 defines the values. Default: 0 (zero), Valid Range: 0 - 255.

DefaultTTL

Data type: uint8
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|DefaultTTL")

Default Time To Live (TTL) value set in the header of outgoing IP packets. The TTL specifies the number of routers an IP packet can pass through to reach its destination before being discarded. Each router decrements by one the TTL count of a packet as it passes through and discards the packets—if the TTL is 0 (zero). Default: 32, Valid Range: 1 - 255.

Description

Data type: string
Access type: Read-only

Textual description of the current object.

This property is inherited from CIM_Setting.

DHCPEnabled

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services|EnableDHCP")

If TRUE, the dynamic host configuration protocol (DHCP) server automatically assigns an IP address to the computer system when establishing a network connection.

DHCPLeaseExpires

Data type: datetime
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services|LeaseTerminatesTime")

Expiration date and time for a leased IP address that was assigned to the computer by the dynamic host configuration protocol (DHCP) server.

Example: 20521201000230.000000000

DHCPLeaseObtained

Data type: datetime
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services|LeaseObtainedTime")

Date and time the lease was obtained for the IP address assigned to the computer by the dynamic host configuration protocol (DHCP) server.

Example: 19521201000230.000000000

DHCPServer

Data type: string
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services|DhcpServer")

IP address of the dynamic host configuration protocol (DHCP) server.

Example: "10.55.34.2"

DNSDomain

Data type: string
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|Domain")

Organization name followed by a period and an extension that indicates the type of organization, such as "microsoft.com". The name can be any combination of the letters A through Z, the numerals 0 through 9, and the hyphen (-), plus the period (.) character used as a separator.

Example: "microsoft.com"

DNSDomainSuffixSearchOrder

Data type: string array
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|SearchList")

Array of DNS domain suffixes to be appended to the end of host names during name resolution. When attempting to resolve a fully qualified domain name (FQDN) from a host-only name, the system will first append the local domain name. If this is not successful, the system will use the domain suffix list to create additional FQDNs in the order listed and query DNS servers for each.

Example: "samples.microsoft.com example.microsoft.com"

DNSEnabledForWINSResolution

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|EnableDNS")

If TRUE, the Domain Name System (DNS) is enabled for name resolution over Windows Internet Naming Service (WINS) resolution. If the name cannot be resolved using DNS, the name request is forwarded to WINS for resolution.

DNSHostName

Data type: string
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|Hostname")

Host name used to identify the local computer for authentication by some utilities. Other TCP/IP-based utilities can use this value to acquire the name of the local computer. Host names are stored on DNS servers in a table that maps names to IP addresses for use by DNS. The name can be any combination of the letters A through Z, the numerals 0 through 9, and the hyphen (-), plus the period (.) character used as a separator. By default, this value is the Microsoft networking computer name, but the network administrator can assign another host name without affecting the computer name.

Example: "corpdns"

DNSServerSearchOrder

Data type: string array
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|NameServer")

Array of server IP addresses to be used in querying for DNS servers.

DomainDNSRegistrationEnabled

Data type: boolean
Access type: Read-only

If TRUE, the IP addresses for this connection are registered in DNS under the domain name of this connection in addition to being registered under the computer's full DNS name. The domain name of this connection is either set using the SetDNSDomain() method or assigned by DSCP. The registered name is the host name of the computer with the domain name appended.

ForwardBufferMemory

Data type: uint32
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|ForwardBufferMemory"), Units ("bytes")

Memory allocated by IP to store packet data in the router packet queue. When this buffer space is filled, the router begins discarding packets at random from its queue. Packet queue data buffers are 256 bytes in length, so the value of this parameter should be a multiple of 256. Multiple buffers are chained together for larger packets. The IP header for a packet is stored separately. This parameter is ignored and no buffers are allocated if the IP router is not enabled. The buffer size can range from the network MTU to a value smaller than 0xFFFFFFFF. Default: 74240 (fifty 1480-byte packets, rounded to a multiple of 256).

FullDNSRegistrationEnabled

Data type: boolean
Access type: Read-only

If TRUE, the IP addresses for this connection are registered in DNS under the computer's full DNS name. The full DNS name of the computer is displayed on the Network Identification tab in the System application in Control Panel.

GatewayCostMetric

Data type: uint16 array
Access type: Read-only

Array of integer cost metric values (ranging from 1 to 9999) to be used in calculating the fastest, most reliable, or least resource-intensive routes. This argument has a one-to-one correspondence with the DefaultIPGateway property.

IGMPLevel

Data type: uint8
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|IGMPLevel")

Extent to which the system supports IP multicast and participates in the Internet Group Management Protocol (IGMP). At level 0 (zero), the system provides no multicast support. At level 1, the system may only send IP multicast packets. At level 2, the system may send IP multicast packets and fully participate in IGMP to receive multicast packets.

No Multicast (0)

IP Multicast (1)

IP & IGMP multicast (2)

IP and IGMP Multicast (default)

Index

Data type: uint32
Access type: Read-only
Qualifiers: key, MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Control\\Class\\{4D36E972-E325-11CE-BFC1-08002BE10318}")

Index number of the Windows network adapter configuration. The index number is used when there is more than one configuration available.

InterfaceIndex

Data type: uint32
Access type: Read-only

Index value that uniquely identifies a local network interface. The value in this property is the same as the value in the InterfaceIndex property in the instance of Win32_IP4RouteTable that represents the network interface in the route table.

IPAddress

Data type: string array
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|System\\CurrentControlSet\\Services|Parameters\\Tcpip|IPAddress")

Array of all of the IP addresses associated with the current network adapter. This property can contain either IPv6 addresses or IPv4 addresses. For more information, see IPv6 and IPv4 Support in WMI.

Example IPv6 address: "2010:836B:4179::836B:4179"

IPConnectionMetric

Data type: uint32
Access type: Read-only

Cost of using the configured routes for the IP bound adapter and is the weighted value for those routes in the IP routing table. If there are multiple routes to a destination in the IP routing table, the route with the lowest metric is used. The default value is 1.

IPEnabled

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|System\\CurrentControlSet\\Services|Parameters\\Tcpip")

If TRUE, TCP/IP is bound and enabled on this network adapter.

IPFilterSecurityEnabled

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|IPFilterSecurityEnabled")

If TRUE, IP port security is enabled globally across all IP-bound network adapters and the security values associated with individual network adapters are in effect. This property is used in conjunction with IPSecPermitTCPPorts, IPSecPermitUDPPorts, and IPSecPermitIPProtocols. If FALSE, IP filter security is disabled across all network adapters and allows all port and protocol traffic to flow unfiltered.

IPPortSecurityEnabled

Data type: boolean
Access type: Read-only
Qualifiers: DEPRECATED, MappingStrings ("WMI|Win32_NetworkAdapterConfiguration|IPFilterSecurityEnabled")

If TRUE, IP port security is enabled globally across all IP-bound network adapters. This property is obsolete. In place of this property, you should use IPFilterSecurityEnabled.

IPSecPermitIPProtocols

Data type: string array
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|RawIPAllowedProtocols")

Array of the protocols permitted to run over the IP. The list of protocols is defined using the EnableIPSec method. The list will either be empty or contain numeric values. A numeric value of 0 (zero) indicates access permission is granted for all protocols. An empty string indicates that no protocols are permitted to run when IPFilterSecurityEnabled is TRUE.

IPSecPermitTCPPorts

Data type: string array
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|TCPAllowedPorts")

Array of the ports that will be granted access permission for TCP. The list of protocols is defined using the EnableIPSec method. The list will either be empty or contain numeric values. A numeric value of 0 (zero)indicates access permission is granted for all ports. An empty string indicates that no ports are granted access permission when IPFilterSecurityEnabled is TRUE.

IPSecPermitUDPPorts

Data type: string array
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|UDPAllowedPorts")

Array of the ports that will be granted User Datagram Protocol (UDP) access permission. The list of protocols is defined using the EnableIPSec method. The list will either be empty or contain numeric values. A numeric value of 0 (zero) indicates access permission is granted for all ports. An empty string indicates that no ports are granted access permission when IPFilterSecurityEnabled is TRUE.

IPSubnet

Data type: string array
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|System\\CurrentControlSet\\Services|Parameters|SubnetMask")

Array of all of the subnet masks associated with the current network adapter.

Example: "255.255.0.0"

IPUseZeroBroadcast

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|UseZeroBroadcast")

If TRUE, IP zeros-broadcasts are used (0.0.0.0), and the system uses ones-broadcasts (255.255.255.255). Computer systems generally use ones-broadcasts, but those derived from BSD implementations use zeros-broadcasts. Systems that do not use that same broadcasts will not interoperate on the same network. The default is FALSE.

IPXAddress

Data type: string
Access type: Read-only
Qualifiers: DEPRECATED, MappingStrings ("Win32API|Windows Sockets Version 2|getsockopt|IPX_ADDRESS")

The Internetwork Packet Exchange (IPX) technology is no longer supported and this property does not contain useful data.

IPXEnabled

Data type: boolean
Access type: Read-only
Qualifiers: DEPRECATED, MappingStrings ("WMI")

The Internetwork Packet Exchange (IPX) technology is no longer supported and this property does not contain useful data.

IPXFrameType

Data type: uint32 array
Access type: Read-only
Qualifiers: DEPRECATED, MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\nwlnkipx\\Parameters|PktType")

The Internetwork Packet Exchange (IPX) technology is no longer supported and this property does not contain useful data.

Ethernet II (0)

Ethernet 802.3 (1)

Ethernet 802.2 (2)

Ethernet SNAP (3)

AUTO (255)

IPXMediaType

Data type: uint32
Access type: Read-only
Qualifiers: DEPRECATED, MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\nwlnkipx\\Parameters|MediaType")

The Internetwork Packet Exchange (IPX) technology is no longer supported and this property does not contain useful data.

Ethernet (1)

Token ring (2)

FDDI (3)

ARCNET (8)

IPXNetworkNumber

Data type: string array
Access type: Read-only
Qualifiers: DEPRECATED, MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\nwlnkipx\\Parameters|NetworkNumber")

The Internetwork Packet Exchange (IPX) technology is no longer supported and this property does not contain useful data.

IPXVirtualNetNumber

Data type: string
Access type: Read-only
Qualifiers: DEPRECATED, MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\nwlnkipx\\Parameters|VirtualNetworkNumber")

The Internetwork Packet Exchange (IPX) technology is no longer supported and this property does not contain useful data.

KeepAliveInterval

Data type: uint32
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|KeepAliveInterval"), Units ("milliseconds")

Interval separating Keep Alive Retransmissions until a response is received. After a response is received, the delay until the next Keep Alive Transmission is again controlled by the value of KeepAliveTime. The connection will be aborted after the number of retransmissions specified by TcpMaxDataRetransmissions have gone unanswered. Default: 1000, Valid Range: 1 - 0xFFFFFFFF.

KeepAliveTime

Data type: uint32
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|KeepAliveInterval"), Units ("milliseconds")

The KeepAliveTime property indicates how often the TCP attempts to verify that an idle connection is still intact by sending a Keep Alive Packet. A remote system that is reachable will acknowledge the keep alive transmission. Keep Alive packets are not sent by default. This feature may be enabled in a connection by an application. Default: 7,200,000 (two hours).

MACAddress

Data type: string
Access type: Read-only
Qualifiers: MappingStrings ("Win32API|Device Input and Output Functions|DeviceIoControl")

Media Access Control (MAC) address of the network adapter. A MAC address is assigned by the manufacturer to uniquely identify the network adapter.

Example: "00:80:C7:8F:6C:96"

MTU

Data type: uint32
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|MTU"), Units ("bytes")

Overrides the default Maximum Transmission Unit (MTU) for a network interface. The MTU is the maximum packet size (including the transport header) that the transport will transmit over the underlying network. The IP datagram can span multiple packets. The range of this value spans the minimum packet size (68) to the MTU supported by the underlying network.

NumForwardPackets

Data type: uint32
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|NumForwardPackets")

Number of IP packet headers allocated for the router packet queue. When all headers are in use, the router will begin to discard packets from the queue at random. This value should be at least as large as the ForwardBufferMemory value divided by the maximum IP data size of the networks connected to the router. It should be no larger than the ForwardBufferMemory value divided by 256, since at least 256 bytes of forward buffer memory are used for each packet. The optimal number of forward packets for a given ForwardBufferMemory size depends on the type of traffic on the network. It will be somewhere between these two values. If the router is not enabled, this parameter is ignored and no headers are allocated. Default: 50, Valid Range: 1 - 0xFFFFFFFE.

PMTUBHDetectEnabled

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|EnablePMTUBHDetect")

If TRUE, detection of black hole routers occurs while TCP discovers the path of the Maximum Transmission Unit. A black hole router does not return ICMP Destination Unreachable messages when it needs to fragment an IP datagram with the Don't Fragment bit set. TCP depends on receiving these messages to perform Path MTU Discovery. With this feature enabled, TCP will try to send segments without the Don't Fragment bit set if several retransmissions of a segment go unacknowledged. If the segment is acknowledged as a result, the MSS will be decreased and the Don't Fragment bit will be set in future packets on the connection. Enabling black hole detection increases the maximum number of retransmissions performed for a given segment. The default value of this property is FALSE.

PMTUDiscoveryEnabled

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|EnablePMTUDiscovery")

If TRUE, the Maximum Transmission Unit (MTU) path is discovered over the path to a remote host. By discovering the MTU path and limiting TCP segments to this size, TCP can eliminate fragmentation at routers along the path that connect networks with different MTUs. Fragmentation adversely affects TCP throughput and network congestion. Setting this parameter to FALSE causes an MTU of 576 bytes to be used for all connections that are not to machines on the local subnet. The default is TRUE.

ServiceName

Data type: string
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|Software\\Microsoft\\Windows NT\\CurrentVersion\\NetworkCards|ServiceName")

Service name of the network adapter. This name is usually shorter than the full product name.

Example: "Elnkii"

SettingID

Data type: string
Access type: Read-only
Qualifiers: MaxLen (256)

Identifier by which the current object is known.

This property is inherited from CIM_Setting.

TcpipNetbiosOptions

Data type: uint32
Access type: Read-only

Bitmap of the possible settings related to NetBIOS over TCP/IP. Values are identified in the following list.

EnableNetbiosViaDhcp (0)

EnableNetbios (1)

DisableNetbios (2)

TcpMaxConnectRetransmissions

Data type: uint32
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|TcpMaxConnectRetransmissions")

Number of times TCP attempts to retransmit a Connect Request before terminating the connection. The initial retransmission timeout is 3 seconds. The retransmission timeout doubles for each attempt. Default: 3, Valid Range: 0 - 0xFFFFFFFF.

TcpMaxDataRetransmissions

Data type: uint32
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|TcpMaxDataRetransmissions")

Number of times TCP retransmits an individual data segment (nonconnect segment) before terminating the connection. The retransmission timeout doubles with each successive retransmission on a connection. Default: 5, Valid Range: 0 - 0xFFFFFFFF.

TcpNumConnections

Data type: uint32
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|TcpNumConnections")

Maximum number of connections that TCP can have open simultaneously. Default: 0xFFFFFE, Valid Range: 0 - 0xFFFFFE.

TcpUseRFC1122UrgentPointer

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|TcpUseRFC1122UrgentPointer")

If TRUE, TCP uses the RFC 1122 specification for urgent data. If FALSE (default), TCP uses the mode used by Berkeley Software Design (BSD) derived systems. The two mechanisms interpret the urgent pointer differently and are not interoperable. The default value is FALSE.

TcpWindowSize

Data type: uint16
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|TcpWindowSize"), Units ("bytes")

Maximum TCP Receive Window size offered by the system. The Receive Window specifies the number of bytes a sender may transmit without receiving an acknowledgment. In general, larger receiving windows will improve performance over high-delay and high-bandwidth networks. For efficiency, the receiving window should be an even multiple of the TCP Maximum Segment Size (MSS). Default: Four times the maximum TCP data size or an even multiple of TCP data size rounded up to the nearest multiple of 8192. Ethernet networks default to 8760. Valid range: 0 - 65535.

Note

Windows Vista: This property accesses the "CurrentControlSet\\Services\\Tcpip\\Parameters|TcpWindowSize" registry entry, which is not used in the current implementation of the operating system.

WINSEnableLMHostsLookup

Data type: boolean
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|EnableLMHOSTS")

If TRUE, local lookup files are used. Lookup files will contain a map of IP addresses to host names. If they exist on the local system, they will be found in %SystemRoot%\system32\drivers\etc.

WINSHostLookupFile

Data type: string
Access type: Read-only
Qualifiers: MappingStrings ("Win32API|System Information Functions|GetSystemDirectory|\\drivers\\etc\\lmhosts")

Path to a WINS lookup file on the local system. This file will contain a map of IP addresses to host names. If the file specified in this property is found, it will be copied to the %SystemRoot%\system32\drivers\etc folder of the local system. Valid only if the WINSEnableLMHostsLookup property is TRUE.

WINSPrimaryServer

Data type: string
Access type: Read-only
Qualifiers: MappingStrings ("Win32API|Device Input and Output Functions|DeviceIoControl")

IP address for the primary WINS server.

WINSScopeID

Data type: string
Access type: Read-only
Qualifiers: MappingStrings ("Win32Registry|SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters|ScopeID")

Value appended to the end of the NetBIOS name that isolates a group of computer systems communicating with only each other. It is used for all NetBIOS transactions over TCP/IP communications from that computer system. Computers configured with identical scope identifiers are able to communicate with this computer. TCP/IP clients with different scope identifiers disregard packets from computers with this scope identifier. Valid only when the EnableWINS method executes successfully.

WINSSecondaryServer

Data type: string
Access type: Read-only
Qualifiers: MappingStrings ("Win32API|Device Input and Output Functions|DeviceIoControl")

IP address for the secondary WINS server.

Remarks

The Win32_NetworkAdapterConfiguration class is derived from CIM_Setting.

Examples

The following PowerShell code retrieves the configuration settings for the Microsoft ISTAP Adapter.

$IstapAdapterConfig = Get-WmiObject Win32_NetworkAdapterConfiguration | Where-Object {$_.Description -eq "Microsoft ISATAP Adapter"}
$IstapAdapterConfig

The following C# sample retrieves the description and index number of all network adapter configuration instances. Note that this C# sample uses the Microsoft.Management.Infrastructure namespace, which generally scales more efficiently than the System.Management namespace WMI classes.

using Microsoft.Management.Infrastructure;
...
static void QueryInstanceFunc()
{
   CimSession session = CimSession.Create("localHost");
   IEnumerable<CimInstance> queryInstance = session.QueryInstances(@"root\cimv2", "WQL", "SELECT * FROM Win32_NetworkAdapterConfiguration");

   foreach (CimInstance cimObj in queryInstance)
   {
      Console.WriteLine(cimObj.CimInstanceProperties["Index"].ToString());
      Console.WriteLine(cimObj.CimInstanceProperties["Description"].ToString());
      Console.WriteLine();
   }

Console.ReadLine();
}

The following C# sample retrieves the description and index number of all network adapter configuration instances. Note that this C# sample uses the original System.Management namespace, which has been superceded by Microsoft.Management.Infrastructure.

using System.Management;
...
static void oldSchoolQueryInstanceFunc()
{

   ObjectQuery query = new ObjectQuery("SELECT * FROM Win32_NetworkAdapterConfiguration");
   ManagementObjectSearcher searcher = new ManagementObjectSearcher(query);

   ManagementObjectCollection queryCollection = searcher.Get();
   foreach (ManagementObject m in queryCollection)
   {
      Console.WriteLine("Index : {0}", m["Index"]);
      Console.WriteLine("Description : {0}", m["Description"]);
      Console.WriteLine();
   }
   Console.ReadLine();
}

The following example retrieves information from the Win32_NetworkAdapterConfiguration class.

on error resume next


PrintAll_NICAdapter_information()

'PrintOnlyEnabled_NICAdapter_information()


Function PrintAll_NICAdapter_information()


    strComputer = "."

    Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\CIMV2")


    Set colItems = objWMIService.ExecQuery("SELECT * FROM Win32_NetworkAdapterConfiguration",,48)


    i = 0

    For Each objItem in colItems

        i = i + 1

        Wscript.Echo "-----------------------------------"

        Wscript.Echo "Win32_NetworkAdapterConfiguration instance: " & i

        Wscript.Echo "-----------------------------------"

        

        strDefaultIPGateway = GetMultiString_FromArray(objitem.DefaultIPGateway, ", ")

        Wscript.Echo "MACAddress                  : " & vbtab & objItem.MACAddress
        Wscript.Echo "Description                 : " & vbtab & objItem.Description
        Wscript.Echo "DHCPEnabled                 : " & vbtab & objItem.DHCPEnabled

        strIPAddress=GetMultiString_FromArray(objitem.IPAddress, ", ")

        Wscript.Echo "IPAddress                   : " & vbtab & strIPAddress

        strIPSubnet = GetMultiString_FromArray(objitem.IPSubnet, ", ")

        Wscript.Echo "IPSubnet                    : " & vbtab & strIPSubnet
        Wscript.Echo "IPConnectionMetric          : " & vbtab & objItem.IPConnectionMetric
        Wscript.Echo "DHCPLeaseExpires            : " & vbtab & objItem.DHCPLeaseExpires
        Wscript.Echo "DHCPLeaseObtained           : " & vbtab & objItem.DHCPLeaseObtained
        Wscript.Echo "DHCPServer                  : " & vbtab & objItem.DHCPServer
        Wscript.Echo "DNSDomain                   : " & vbtab & objItem.DNSDomain
        Wscript.Echo "IPEnabled                   : " & vbtab & objItem.IPEnabled
        Wscript.Echo "DefaultIPGateway            : " & vbtab & strDefaultIPGateway
        Wscript.Echo "GatewayCostMetric           : " & vbtab & strGatewayCostMetric
        Wscript.Echo "IPFilterSecurityEnabled     : " & vbtab & objItem.IPFilterSecurityEnabled
        Wscript.Echo "IPPortSecurityEnabled       : " & vbtab & objItem.IPPortSecurityEnabled

        strDNSDomainSuffixSearchOrder = GetMultiString_FromArray(objitem.DNSDomainSuffixSearchOrder, ", ")

        Wscript.Echo "DNSDomainSuffixSearchOrder  : " & vbtab & strDNSDomainSuffixSearchOrder
        Wscript.Echo "DNSEnabledForWINSResolution : " & vbtab & objItem.DNSEnabledForWINSResolution
        Wscript.Echo "DNSHostName                 : " & vbtab & objItem.DNSHostName

        

        strDNSServerSearchOrder = GetMultiString_FromArray(objitem.DNSServerSearchOrder, ", ")

        Wscript.Echo "DNSServerSearchOrder        : " & vbtab & strDNSServerSearchOrder
        Wscript.Echo "DomainDNSRegistrationEnabled: " & vbtab & objItem.DomainDNSRegistrationEnabled
        Wscript.Echo "ForwardBufferMemory         : " & vbtab & objItem.ForwardBufferMemory
        Wscript.Echo "FullDNSRegistrationEnabled  : " & vbtab & objItem.FullDNSRegistrationEnabled

        strGatewayCostMetric = GetMultiString_FromArray(objitem.GatewayCostMetric, ", ")

        Wscript.Echo "IGMPLevel                   : " & vbtab & objItem.IGMPLevel
        Wscript.Echo "Index                       : " & vbtab & objItem.Index

        strIPSecPermitIPProtocols = GetMultiString_FromArray(objitem.IPSecPermitIPProtocols, ", ")

        Wscript.Echo "IPSecPermitIPProtocols      : " & vbtab & strIPSecPermitIPProtocols


        strIPSecPermitTCPPorts =GetMultiString_FromArray(objitem.IPSecPermitTCPPorts, ", ")

        Wscript.Echo "IPSecPermitTCPPorts         : " & vbtab & strIPSecPermitTCPPorts


        strIPSecPermitUDPPorts = GetMultiString_FromArray(objitem.IPSecPermitUDPPorts, ", ")

        Wscript.Echo "IPSecPermitUDPPorts         : " & vbtab & strIPSecPermitUDPPorts


        Wscript.Echo "IPUseZeroBroadcast          : " & vbtab & objItem.IPUseZeroBroadcast
        Wscript.Echo "IPXAddress                  : " & vbtab & objItem.IPXAddress
        Wscript.Echo "IPXEnabled                  : " & vbtab & objItem.IPXEnabled

        strIPXFrameType=GetMultiString_FromArray(objitem.IPXFrameType, ", ")

        Wscript.Echo "IPXFrameType                : " & vbtab & strIPXFrameType


        strIPXNetworkNumber=GetMultiString_FromArray(objitem.IPXNetworkNumber, ", ")

        Wscript.Echo "IPXNetworkNumber            : " & vbtab & strIPXNetworkNumber
        Wscript.Echo "IPXVirtualNetNumber         : " & vbtab & objItem.IPXVirtualNetNumber
        Wscript.Echo "KeepAliveInterval           : " & vbtab & objItem.KeepAliveInterval

        Wscript.Echo "KeepAliveTime               : " & vbtab & objItem.KeepAliveTime
        Wscript.Echo "MTU                         : " & vbtab & objItem.MTU
        Wscript.Echo "NumForwardPackets           : " & vbtab & objItem.NumForwardPackets
        Wscript.Echo "PMTUBHDetectEnabled         : " & vbtab & objItem.PMTUBHDetectEnabled
        Wscript.Echo "PMTUDiscoveryEnabled        : " & vbtab & objItem.PMTUDiscoveryEnabled
        Wscript.Echo "ServiceName                 : " & vbtab & objItem.ServiceName
        Wscript.Echo "SettingID                   : " & vbtab & objItem.SettingID
        Wscript.Echo "TcpipNetbiosOptions         : " & vbtab & objItem.TcpipNetbiosOptions
        Wscript.Echo "TcpMaxConnectRetransmissions: " & vbtab & objItem.TcpMaxConnectRetransmissions
        Wscript.Echo "TcpMaxDataRetransmissions   : " & vbtab & objItem.TcpMaxDataRetransmissions
        Wscript.Echo "TcpNumConnections           : " & vbtab & objItem.TcpNumConnections
        Wscript.Echo "TcpUseRFC1122UrgentPointer  : " & vbtab & objItem.TcpUseRFC1122UrgentPointer
        Wscript.Echo "TcpWindowSize               : " & vbtab & objItem.TcpWindowSize
        Wscript.Echo "WINSEnableLMHostsLookup     : " & vbtab & objItem.WINSEnableLMHostsLookup
        Wscript.Echo "WINSHostLookupFile          : " & vbtab & objItem.WINSHostLookupFile
        Wscript.Echo "WINSPrimaryServer           : " & vbtab & objItem.WINSPrimaryServer
        Wscript.Echo "WINSScopeID                 : " & vbtab & objItem.WINSScopeID
        Wscript.Echo "WINSSecondaryServer         : " & vbtab & objItem.WINSSecondaryServer
        Wscript.Echo "ArpAlwaysSourceRoute        : " & vbtab & objItem.ArpAlwaysSourceRoute
        Wscript.Echo "ArpUseEtherSNAP             : " & vbtab & objItem.ArpUseEtherSNAP
        Wscript.Echo "DatabasePath                : " & vbtab & objItem.DatabasePath
        Wscript.Echo "DeadGWDetectEnabled         : " & vbtab & objItem.DeadGWDetectEnabled

        Wscript.Echo "DefaultTOS                  : " & vbtab & objItem.DefaultTOS
        Wscript.Echo "DefaultTTL                  : " & vbtab & objItem.DefaultTTL

        

    Next

End Function ' Function PrintAll_NICAdapter_information()


' Script to get comprehensive nic info

sub appendCollection(msg, colctn, nm)

    i=0
    for each t in colctn
        msg = msg & "nic." & nm & "["&i&"]: " & t & vbCRLF
        i = i + 1
    next
end sub


Function PrintOnlyEnabled_NICAdapter_information()

    strComputer = "."

    Set objWMIService = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
    Set colNicConfigs = objWMIService.ExecQuery ("SELECT * FROM Win32_NetworkAdapterConfiguration WHERE IPEnabled = True")


    for each nic in colNicConfigs

        msg = "nic.ArpAlwaysSourceRoute: " & nic.ArpAlwaysSourceRoute & vbCRLF _
        & "nic.ArpUseEtherSNAP: " & nic.ArpUseEtherSNAP & vbCRLF _
        & "nic.Caption: " & nic.Caption & vbCRLF _
        & "nic.DatabasePath: " & nic.DatabasePath & vbCRLF _
        & "nic.DeadGWDetectEnabled: " & nic.DeadGWDetectEnabled & vbCRLF _
        & "nic.DefaultTOS: " & nic.DefaultTOS & vbCRLF _
        & "nic.DefaultTTL: " & nic.DefaultTTL & vbCRLF _
        & "nic.Description: " & nic.Description & vbCRLF _
        & "nic.DHCPEnabled: " & nic.DHCPEnabled & vbCRLF _
        & "nic.DHCPLeaseExpires: " & nic.DHCPLeaseExpires & vbCRLF _
        & "nic.DHCPLeaseObtained: " & nic.DHCPLeaseObtained & vbCRLF _
        & "nic.DHCPServer: " & nic.DHCPServer & vbCRLF _
        & "nic.DNSDomain: " & nic.DNSDomain & vbCRLF _
        & "nic.DNSEnabledForWINSResolution: " & nic.DNSEnabledForWINSResolution & vbCRLF _
        & "nic.DNSHostName: " & nic.DNSHostName & vbCRLF _
        & "nic.DomainDNSRegistrationEnabled: " & nic.DomainDNSRegistrationEnabled & vbCRLF _
        & "nic.DNSDomainSuffixSearchOrder: " & nic.DNSDomainSuffixSearchOrder & vbCRLF _
        & "nic.ForwardBufferMemory: " & nic.ForwardBufferMemory & vbCRLF _
        & "nic.FullDNSRegistrationEnabled: " & nic.FullDNSRegistrationEnabled & vbCRLF _
        & "nic.IGMPLevel: " & nic.IGMPLevel & vbCRLF _
        & "nic.Index: " & nic.Index & vbCRLF _
        & "nic.IPConnectionMetric: " & nic.IPConnectionMetric & vbCRLF _
        & "nic.IPEnabled: " & nic.IPEnabled & vbCRLF _
        & "nic.IPFilterSecurityEnabled: " & nic.IPFilterSecurityEnabled & vbCRLF _
        & "nic.IPPortSecurityEnabled: " & nic.IPPortSecurityEnabled & vbCRLF _
        & "nic.IPUseZeroBroadcast: " & nic.IPUseZeroBroadcast & vbCRLF _
        & "nic.IPXAddress: " & nic.IPXAddress & vbCRLF _
        & "nic.IPXEnabled: " & nic.IPXEnabled & vbCRLF _
        & "nic.IPXFrameType: " & nic.IPXFrameType & vbCRLF _
        & "nic.IPXMediaType: " & nic.IPXMediaType & vbCRLF _
        & "nic.IPXNetworkNumber: " & nic.IPXNetworkNumber & vbCRLF _
        & "nic.IPXVirtualNetNumber: " & nic.IPXVirtualNetNumber & vbCRLF _
        & "nic.KeepAliveInterval: " & nic.KeepAliveInterval & vbCRLF _
        & "nic.KeepAliveTime: " & nic.KeepAliveTime & vbCRLF _
        & "nic.MACAddress: " & nic.MACAddress & vbCRLF _
        & "nic.MTU: " & nic.MTU & vbCRLF _
        & "nic.NumForwardPackets: " & nic.NumForwardPackets & vbCRLF _
        & "nic.PMTUBHDetectEnabled: " & nic.PMTUBHDetectEnabled & vbCRLF _
        & "nic.PMTUDiscoveryEnabled: " & nic.PMTUDiscoveryEnabled & vbCRLF _
        & "nic.ServiceName: " & nic.ServiceName & vbCRLF _
        & "nic.SettingID: " & nic.SettingID & vbCRLF _
        & "nic.TcpipNetbiosOptions: " & nic.TcpipNetbiosOptions & vbCRLF _
        & "nic.TcpMaxConnectRetransmissions: " & nic.TcpMaxConnectRetransmissions & vbCRLF _
        & "nic.TcpMaxDataRetransmissions: " & nic.TcpMaxDataRetransmissions & vbCRLF _
        & "nic.TcpNumConnections: " & nic.TcpNumConnections & vbCRLF _
        & "nic.TcpUseRFC1122UrgentPointer: " & nic.TcpUseRFC1122UrgentPointer & vbCRLF _
        & "nic.TcpWindowSize: " & nic.TcpWindowSize & vbCRLF _
        & "nic.WINSEnableLMHostsLookup: " & nic.WINSEnableLMHostsLookup & vbCRLF _
        & "nic.WINSHostLookupFile: " & nic.WINSHostLookupFile & vbCRLF _
        & "nic.WINSPrimaryServer: " & nic.WINSPrimaryServer & vbCRLF _
        & "nic.WINSScopeID: " & nic.WINSScopeID & vbCRLF _
        & "nic.WINSSecondaryServer: " & nic.WINSSecondaryServer & vbCRLF _
        '& "nic.InterfaceIndex: " & "|"&nic.InterfaceIndex & vbCRLF _


        appendCollection msg, nic.DefaultIPGateway, "DefaultIPGateway"
        appendCollection msg, nic.DNSServerSearchOrder, "DNSServerSearchOrder"
        appendCollection msg, nic.GatewayCostMetric, "GatewayCostMetric"
        appendCollection msg, nic.IPAddress, "IPAddress"
        appendCollection msg, nic.IPSecPermitIPProtocols, "IPSecPermitIPProtocols"
        appendCollection msg, nic.IPSecPermitTCPPorts, "IPSecPermitTCPPorts"
        appendCollection msg, nic.IPSecPermitUDPPorts, "IPSecPermitUDPPorts"
        appendCollection msg, nic.IPSubnet, "IPSubnet"


        WScript.Echo msg

    next


    'Vista only code???

    'Set colAdapters = objWMIService.Execquery ("SELECT * FROM Win32_NetworkAdapter WHERE NetEnabled = True")

    'For Each nic in colAdapters

    ' msg = "nic.DeviceId: " & nic.DeviceId & vbCRLF _

    ' & "nic.Name: " & nic.Name & vbCRLF _

    '

    'Next

End Function 'Function PrintOnlyEnabled_NICAdapter_information()

Function GetMultiString_FromArray( ArrayString, Seprator)

    If IsNull ( ArrayString ) Then

        StrMultiArray = ArrayString

    else

        StrMultiArray = Join( ArrayString, Seprator )

   end if

   GetMultiString_FromArray = StrMultiArray

End Function

Requirements

Requirement	Value
Minimum supported client	Windows Vista
Minimum supported server	Windows Server 2008
Namespace	Root\CIMV2
MOF	CIMWin32.mof
DLL	CIMWin32.dll

Share via

Win32_NetworkAdapterConfiguration class

Syntax

Members

Methods

Properties

Remarks

Examples

Requirements

See also

Feedback

Additional resources