Share via

az monitor alert-processing-rule

  • Preview
  • Reference

Note

This reference is part of the alertsmanagement extension for the Azure CLI (version 2.45.0 or higher). The extension will automatically install the first time you run an az monitor alert-processing-rule command. Learn more about extensions.

This command group is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Manage alert processing rule with alertsmanagement.

Commands

Name Description Type Status
az monitor alert-processing-rule create

Create an alert processing rule.

 Extension Preview
az monitor alert-processing-rule delete

Delete an alert processing rule.

 Extension Preview
az monitor alert-processing-rule list

List all alert processing rules in a subscription or resource group.

 Extension Preview
az monitor alert-processing-rule show

Get an alert processing rule.

 Extension Preview
az monitor alert-processing-rule update

Enable, disable, or update tags for an alert processing rule.

 Extension Preview

az monitor alert-processing-rule create

Preview

Command group 'monitor alert-processing-rule' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Create an alert processing rule.

az monitor alert-processing-rule create --name
                                        --resource-group
                                        --rule-type {AddActionGroups, RemoveAllActionGroups}
                                        --scopes
                                        [--action-groups]
                                        [--description]
                                        [--enabled {false, true}]
                                        [--filter-alert-context]
                                        [--filter-alert-rule-description]
                                        [--filter-alert-rule-id]
                                        [--filter-alert-rule-name]
                                        [--filter-monitor-condition]
                                        [--filter-monitor-service]
                                        [--filter-resource-group]
                                        [--filter-resource-type]
                                        [--filter-severity]
                                        [--filter-signal-type]
                                        [--filter-target-resource]
                                        [--schedule-end-datetime]
                                        [--schedule-recurrence]
                                        [--schedule-recurrence-2]
                                        [--schedule-recurrence-2-end-time]
                                        [--schedule-recurrence-2-start-time]
                                        [--schedule-recurrence-2-type {Daily, Monthly, Weekly}]
                                        [--schedule-recurrence-end-time]
                                        [--schedule-recurrence-start-time]
                                        [--schedule-recurrence-type {Daily, Monthly, Weekly}]
                                        [--schedule-start-datetime]
                                        [--schedule-time-zone]
                                        [--tags]

Examples

Create or update a rule that adds an action group to all alerts in a subscription

az monitor alert-processing-rule create \
--name 'AddActionGroupToSubscription' \
--rule-type AddActionGroups \
--scopes "/subscriptions/MySubscriptionId" \
--action-groups "/subscriptions/MySubscriptionId/resourcegroups/MyResourceGroup1/providers/microsoft.insights/actiongroups/ActionGroup1" \
--enabled true \
--resource-group alertscorrelationrg \
--description "Add ActionGroup1 to all alerts in the subscription"

Create or update a rule that adds two action groups to all Sev0 and Sev1 alerts in two resource groups

az monitor alert-processing-rule create \
--name 'AddActionGroupsBySeverity' \
--rule-type AddActionGroups \
--action-groups "/subscriptions/MySubscriptionId/resourcegroups/MyResourceGroup1/providers/microsoft.insights/actiongroups/MyActionGroupId1" "/subscriptions/MySubscriptionId/resourceGroups/MyResourceGroup2/providers/microsoft.insights/actionGroups/MyActionGroup2" \
--scopes "/subscriptions/MySubscriptionId" \
--resource-group alertscorrelationrg \
--filter-severity Equals Sev0 Sev1 \
--description "Add AGId1 and AGId2 to all Sev0 and Sev1 alerts in these resourceGroups"

Create or update a rule that removes all action groups from alerts on a specific VM during a one-off maintenance window (1800-2000 at a specific date, Pacific Standard Time)

az monitor alert-processing-rule create \
--name 'RemoveActionGroupsMaintenanceWindow' \
--rule-type RemoveAllActionGroups \
--scopes "/subscriptions/MySubscriptionId/resourceGroups/MyResourceGroup1/providers/Microsoft.Compute/virtualMachines/VMName" \
--resource-group alertscorrelationrg \
--schedule-start-datetime '2022-01-02 18:00:00' \
--schedule-end-datetime '2022-01-02 20:00:00' \
--schedule-time-zone 'Pacific Standard Time' \
--description "Removes all ActionGroups from all Alerts on VMName during the maintenance window"

Create or update a rule that removes all action groups from all alerts in a subscription coming from a specific alert rule

az monitor alert-processing-rule create \
--name 'RemoveActionGroupsSpecificAlertRule' \
--rule-type RemoveAllActionGroups \
--scopes "/subscriptions/MySubscriptionId" \
--resource-group alertscorrelationrg \
--filter-alert-rule-id Equals "/subscriptions/MySubscriptionId/resourceGroups/MyResourceGroup1/providers/microsoft.insights/activityLogAlerts/RuleName" \
--description "Removes all ActionGroups from all Alerts that fire on above AlertRule"

Create or update a rule that removes all action groups from all alerts on any VM in two resource groups during a recurring maintenance window (2200-0400 every Sat and Sun, India Standard Time)

az monitor alert-processing-rule create \
--name 'RemoveActionGroupsRecurringMaintenance' \
--rule-type RemoveAllActionGroups \
--scopes "/subscriptions/MySubscriptionId/resourceGroups/MyResourceGroup1" "/subscriptions/MySubscriptionId/resourceGroups/MyResourceGroup2" \
--resource-group alertscorrelationrg \
--filter-resource-type Equals "microsoft.compute/virtualmachines" \
--schedule-time-zone "India Standard Time" \
--schedule-recurrence-type Weekly \
--schedule-recurrence-start-time "22:00:00" \
--schedule-recurrence-end-time "04:00:00" \
--schedule-recurrence Sunday Saturday \
--description "Remove all ActionGroups from all Virtual machine Alerts during the recurring maintenance"

Create or update a rule that removes all action groups outside business hours (Mon-Fri 09:00-17:00, Eastern Standard Time)

az monitor alert-processing-rule create \
--name 'RemoveActionGroupsOutsideBusinessHours' \
--rule-type RemoveAllActionGroups \
--scopes "/subscriptions/MySubscriptionId" \
--resource-group alertscorrelationrg \
--schedule-time-zone "Eastern Standard Time" \
--schedule-recurrence-type Daily \
--schedule-recurrence-start-time "17:00:00" \
--schedule-recurrence-end-time "09:00:00" \
--schedule-recurrence-2-type Weekly \
--schedule-recurrence-2 Saturday Sunday \
--description "Remove all ActionGroups outside business hours"

Required Parameters

--name -n

Name of the alert processing rule.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--rule-type

Indicate type of the alert processing rule.

Accepted values: AddActionGroups, RemoveAllActionGroups
--scopes

List of resource IDs (space-delimited) for scope. The rule will apply to alerts that fired on resources within that scope.

Optional Parameters

--action-groups

List of resource ids (space-delimited) of action groups to add. A use of this argument requires that rule-type is AddActionGroups.

--description

Description of the alert processing rule.

--enabled

Indicate if the given alert processing rule is enabled or disabled (default is enabled).

Accepted values: false, true
--filter-alert-context

Filter alerts by alert context (payload).

Filter format is where Operator: one of <Equals, NotEquals, Contains, DoesNotContain> Values: List of values to match for a given condition.

--filter-alert-rule-description

Filter alerts by alert rule description.

--filter-alert-rule-id

Filter alerts by alert ID.

--filter-alert-rule-name

Filter alerts by alert rule name.

--filter-monitor-condition

Filter alerts by monitor condition.

--filter-monitor-service

Filter alerts by monitor service.

--filter-resource-group

Filter alerts by resource group.

--filter-resource-type

Filter alerts by resource type.

--filter-severity

Filter alerts by severity <Sev0, Sev1, Sev2, Sev3, Sev4>.

--filter-signal-type

Filter alerts by signal type.

--filter-target-resource

Filter alerts by resource.

--schedule-end-datetime

End date for the rule. Format: 'YYYY-MM-DD hh:mm:ss'.

--schedule-recurrence

List of recurrence pattern values.

--schedule-recurrence : List of recurrence pattern values (space-delimited). For a weekly recurrence type, allowed values are Sunday to Saturday. For a monthly recurrence type, allowed values are 1 to 31 (days of month).

--schedule-recurrence-2

List of recurrence pattern values for the second recurrence pattern.

--schedule-recurrence-2 : List of recurrence pattern values (space-delimited). For a weekly recurrence type, allowed values are Sunday to Saturday. For a monthly recurrence type, allowed values are 1 to 31 (days of month).

--schedule-recurrence-2-end-time

End time for each recurrence. Format: hh:mm:ss.

--schedule-recurrence-2-start-time

Start time for each recurrence. Format: hh:mm:ss.

--schedule-recurrence-2-type

Specifies when the processing rule should be applied. Default to Always.

Accepted values: Daily, Monthly, Weekly
--schedule-recurrence-end-time

End time for each recurrence. Format: 'hh:mm:ss'.

--schedule-recurrence-start-time

Start time for each recurrence. Format: 'hh:mm:ss'.

--schedule-recurrence-type

Specifies when the processing rule should be applied.

Accepted values: Daily, Monthly, Weekly
--schedule-start-datetime

Start date for the rule. Format: 'YYYY-MM-DD hh:mm:ss'.

--schedule-time-zone

Schedule time zone.

Default value: UTC
--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az monitor alert-processing-rule delete

Preview

Command group 'monitor alert-processing-rule' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Delete an alert processing rule.

az monitor alert-processing-rule delete [--ids]
                                        [--name]
                                        [--resource-group]
                                        [--subscription]
                                        [--yes]

Examples

Delete an alert processing rule.

az monitor alert-processing-rule delete \
--resource-group myResourceGroup \
--name myRuleName

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

Name of the alert processing rule.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--yes -y

Do not prompt for confirmation.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az monitor alert-processing-rule list

Preview

Command group 'monitor alert-processing-rule' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

List all alert processing rules in a subscription or resource group.

az monitor alert-processing-rule list [--resource-group]

Examples

List all alert processing rules in current subscription

az monitor alert-processing-rule list

List all alert processing rules in a resource group

az monitor alert-processing-rule list \
--resource-group myResourceGroup

Optional Parameters

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az monitor alert-processing-rule show

Preview

Command group 'monitor alert-processing-rule' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Get an alert processing rule.

az monitor alert-processing-rule show [--ids]
                                      [--name]
                                      [--resource-group]
                                      [--subscription]

Examples

Get an alert processing rule by name

az monitor alert-processing-rule show \
--name myRuleName \
--resource-group myRuleNameResourceGroup

Get alerts processing rule by ids

az monitor alert-processing-rule show \
--ids ruleId1 ruleId2

Optional Parameters

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

Name of the alert processing rule.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az monitor alert-processing-rule update

Preview

Command group 'monitor alert-processing-rule' is in preview and under development. Reference and support levels: https://aka.ms/CLI_refstatus

Enable, disable, or update tags for an alert processing rule.

az monitor alert-processing-rule update [--add]
                                        [--enabled {false, true}]
                                        [--force-string]
                                        [--ids]
                                        [--name]
                                        [--remove]
                                        [--resource-group]
                                        [--set]
                                        [--subscription]
                                        [--tags]

Examples

PatchAlertProcessingRule

az monitor alert-processing-rule update \
--name "WeeklySuppression" \
--enabled false \
--tags key1="value1" key2="value2" --resource-group "alertscorrelationrg"

Optional Parameters

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

Default value: []
--enabled

Indicate if the given processing rule is enabled or disabled (values are True and False).

Accepted values: false, true
--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

Name of the alert processing rule.

--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

Default value: []
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

Default value: []
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.